summaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)AuthorFilesLines
2012-04-17mac80211: fix logic error in ibss channel type checkFelix Fietkau1-2/+2
The broken check leads to rate control attempting to use HT40 while the driver is configured for HT20. This leads to interesting hardware issues. HT40 can only be used if the channel type is either HT40- or HT40+ and if the channel type of the cell matches the local type. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-17mac80211: fix truncated packets in cooked monitor rxFelix Fietkau1-4/+6
Cooked monitor rx was recently changed to use ieee80211_add_rx_radiotap_header instead of generating only limited radiotap information. ieee80211_add_rx_radiotap_header assumes that FCS info is still present if the hardware supports receiving it, however when cooked monitor rx packets are processed, FCS info has already been stripped. Fix this by adding an extra flag indicating FCS presence. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09mac80211: fix association beacon wait timeoutJohannes Berg1-2/+1
The TU_TO_EXP_TIME() macro already includes the "jiffies +" piece of the calculation, so don't add jiffies again. Reported-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-05Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds6-16/+9
Merge batch of fixes from Andrew Morton: "The simple_open() cleanup was held back while I wanted for laggards to merge things. I still need to send a few checkpoint/restore patches. I've been wobbly about merging them because I'm wobbly about the overall prospects for success of the project. But after speaking with Pavel at the LSF conference, it sounds like they're further toward completion than I feared - apparently davem is at the "has stopped complaining" stage regarding the net changes. So I need to go back and re-review those patchs and their (lengthy) discussion." * emailed from Andrew Morton <akpm@linux-foundation.org>: (16 patches) memcg swap: use mem_cgroup_uncharge_swap fix backlight: add driver for DA9052/53 PMIC v1 C6X: use set_current_blocked() and block_sigmask() MAINTAINERS: add entry for sparse checker MAINTAINERS: fix REMOTEPROC F: typo alpha: use set_current_blocked() and block_sigmask() simple_open: automatically convert to simple_open() scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open() libfs: add simple_open() hugetlbfs: remove unregister_filesystem() when initializing module drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback fs/xattr.c:setxattr(): improve handling of allocation failures fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed fs/xattr.c: suppress page allocation failure warnings from sys_listxattr() sysrq: use SEND_SIG_FORCED instead of force_sig() proc: fix mount -t proc -o AAA
2012-04-05simple_open: automatically convert to simple_open()Stephen Boyd6-16/+9
Many users of debugfs copy the implementation of default_open() when they want to support a custom read/write function op. This leads to a proliferation of the default_open() implementation across the entire tree. Now that the common implementation has been consolidated into libfs we can replace all the users of this function with simple_open(). This replacement was done with the following semantic patch: <smpl> @ open @ identifier open_f != simple_open; identifier i, f; @@ -int open_f(struct inode *i, struct file *f) -{ ( -if (i->i_private) -f->private_data = i->i_private; | -f->private_data = i->i_private; ) -return 0; -} @ has_open depends on open @ identifier fops; identifier open.open_f; @@ struct file_operations fops = { ... -.open = open_f, +.open = simple_open, ... }; </smpl> [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28mac80211: fix oper channel timestamp updationRajkumar Manoharan1-1/+1
Whenever the station informs the AP that it is about to leave the operating channel, the timestamp should be recorded. It is handled in scan resume but not in scan start. Fix that. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-26mac80211: fix possible tid_rx->reorder_timer use after freeStanislaw Gruszka1-1/+2
Is possible that we will arm the tid_rx->reorder_timer after del_timer_sync() in ___ieee80211_stop_rx_ba_session(). We need to stop timer after RCU grace period finish, so move it to ieee80211_free_tid_rx(). Timer will not be armed again, as rcu_dereference(sta->ampdu_mlme.tid_rx[tid]) will return NULL. Debug object detected problem with the following warning: ODEBUG: free active (active state 0) object type: timer_list hint: sta_rx_agg_reorder_timer_expired+0x0/0xf0 [mac80211] Bug report (with all warning messages): https://bugzilla.redhat.com/show_bug.cgi?id=804007 Reported-by: "jan p. springer" <jsd@igroup.org> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-26mac80211: remove outdated commentEliad Peller1-3/+0
The on-oper-channel optimization was reverted, so remove the outdated comment as well. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds34-2266/+2373
Pull networking merge from David Miller: "1) Move ixgbe driver over to purely page based buffering on receive. From Alexander Duyck. 2) Add receive packet steering support to e1000e, from Bruce Allan. 3) Convert TCP MD5 support over to RCU, from Eric Dumazet. 4) Reduce cpu usage in handling out-of-order TCP packets on modern systems, also from Eric Dumazet. 5) Support the IP{,V6}_UNICAST_IF socket options, making the wine folks happy, from Erich Hoover. 6) Support VLAN trunking from guests in hyperv driver, from Haiyang Zhang. 7) Support byte-queue-limtis in r8169, from Igor Maravic. 8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but was never properly implemented, Jiri Benc fixed that. 9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang. 10) Support kernel side dump filtering by ctmark in netfilter ctnetlink, from Pablo Neira Ayuso. 11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker. 12) Add new peek socket options to assist with socket migration, from Pavel Emelyanov. 13) Add sch_plug packet scheduler whose queue is controlled by userland daemons using explicit freeze and release commands. From Shriram Rajagopalan. 14) Fix FCOE checksum offload handling on transmit, from Yi Zou." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits) Fix pppol2tp getsockname() Remove printk from rds_sendmsg ipv6: fix incorrent ipv6 ipsec packet fragment cpsw: Hook up default ndo_change_mtu. net: qmi_wwan: fix build error due to cdc-wdm dependecy netdev: driver: ethernet: Add TI CPSW driver netdev: driver: ethernet: add cpsw address lookup engine support phy: add am79c874 PHY support mlx4_core: fix race on comm channel bonding: send igmp report for its master fs_enet: Add MPC5125 FEC support and PHY interface selection net: bpf_jit: fix BPF_S_LDX_B_MSH compilation net: update the usage of CHECKSUM_UNNECESSARY fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso ixgbe: Fix issues with SR-IOV loopback when flow control is disabled net/hyperv: Fix the code handling tx busy ixgbe: fix namespace issues when FCoE/DCB is not enabled rtlwifi: Remove unused ETH_ADDR_LEN defines igbvf: Use ETH_ALEN ... Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.
2012-03-20Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds1-7/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU changes for v3.4 from Ingo Molnar. The major features of this series are: - making RCU more aggressive about entering dyntick-idle mode in order to improve energy efficiency - converting a few more call_rcu()s to kfree_rcu()s - applying a number of rcutree fixes and cleanups to rcutiny - removing CONFIG_SMP #ifdefs from treercu - allowing RCU CPU stall times to be set via sysfs - adding CPU-stall capability to rcutorture - adding more RCU-abuse diagnostics - updating documentation - fixing yet more issues located by the still-ongoing top-to-bottom inspection of RCU, this time with a special focus on the CPU-hotplug code path. * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits) rcu: Stop spurious warnings from synchronize_sched_expedited rcu: Hold off RCU_FAST_NO_HZ after timer posted rcu: Eliminate softirq-mediated RCU_FAST_NO_HZ idle-entry loop rcu: Add RCU_NONIDLE() for idle-loop RCU read-side critical sections rcu: Allow nesting of rcu_idle_enter() and rcu_idle_exit() rcu: Remove redundant check for rcu_head misalignment PTR_ERR should be called before its argument is cleared. rcu: Convert WARN_ON_ONCE() in rcu_lock_acquire() to lockdep rcu: Trace only after NULL-pointer check rcu: Call out dangers of expedited RCU primitives rcu: Rework detection of use of RCU by offline CPUs lockdep: Add CPU-idle/offline warning to lockdep-RCU splat rcu: No interrupt disabling for rcu_prepare_for_idle() rcu: Move synchronize_sched_expedited() to rcutree.c rcu: Check for illegal use of RCU from offlined CPUs rcu: Update stall-warning documentation rcu: Add CPU-stall capability to rcutorture rcu: Make documentation give more realistic rcutorture duration rcutorture: Permit holding off CPU-hotplug operations during boot rcu: Print scheduling-clock information on RCU CPU stall-warning messages ...
2012-03-15mac80211: make uapsd_* keys per-vifEliad Peller6-102/+79
uapsd_queues and uapsd_max_sp_len are relevant only for managed interfaces, and can be configured differently for each vif. Move them from the local struct to sdata->u.mgd, and update the debugfs functions accordingly. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15mac80211: add NULL terminator to debugfs_netdev write bufEliad Peller1-8/+5
Some debugfs write functions call kstrto* functions, which assume the string is null-terminated. Make it valid by changing ieee80211_if_write() to use static buffer instead of allocating one, and set the last char to NULL. (The write functions try to parse some integer/mac address, so 64 bytes buffer should be enough) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-15mac80211: Don't sample max throughput rate in minstrel_htHelmut Schaa1-0/+7
The current max throughput rate is known to be good as otherwise it wouldn't be the max throughput rate. Since rate sampling can introduce some overhead (by adding RTS for example or due to not aggregating the frame) don't sample the max throughput rate. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-13mac80211: Don't let regulatory make us deafPaul Stewart4-19/+51
When regulatory information changes our HT behavior (e.g, when we get a country code from the AP we have just associated with), we should use this information to change the power with which we transmit, and what channels we transmit. Sometimes the channel parameters we derive from regulatory information contradicts the parameters we used in association. For example, we could have associated specifying HT40, but the regulatory rules we apply may forbid HT40 operation. In the situation above, we should reconfigure ourselves to transmit in HT20 only, however it makes no sense for us to disable receive in HT40, since if we associated with these parameters, the AP has every reason to expect we can and will receive packets this way. The code in mac80211 does not have the capability of sending the appropriate action frames to signal a change in HT behaviour so the AP has no clue we can no longer receive frames encoded this way. In some broken AP implementations, this can leave us effectively deaf if the AP never retries in lower HT rates. This change breaks up the channel_type parameter in the ieee80211_enable_ht function into a separate receive and transmit part. It honors the channel flags set by regulatory in order to configure the rate control algorithm, but uses the capability flags to configure the channel on the radio, since these were used in association to set the AP's transmit rate. Signed-off-by: Paul Stewart <pstew@chromium.org> Cc: Sam Leffler <sleffler@chromium.org> Cc: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Luis R Rodriguez <mcgrof@frijolero.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-13mac80211: rename bss_conf timestamp to last_tsfJohannes Berg2-2/+2
This value is not really very useful by itself, yet some drivers (including iwlwifi until I can figure out what it should do) use it. At least rename it to "last_tsf" to indicate the meaning and add a note that it may be really old. I suspect the value may become useful combined with the rx_status->mactime, but we don't (yet) store that value and pass it to the driver. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-13mac80211: linearize SKBs as needed for cryptoJohannes Berg3-8/+31
Not linearizing every SKB will help actually pass non-linear SKBs all the way up when on an encrypted connection. For now, linearize TKIP completely as it is lower performance and I don't quite grok all the details. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-13mac80211: move RX WEP weak IV countingJohannes Berg3-12/+6
This is better done inside the WEP decrypt function where it doesn't have to check all the conditions any more since they've been tested already. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12mac80211: set basic rates earlierJohannes Berg1-48/+49
The authentication and association handshake already happens in the context of the new BSS, and the basic rates are needed at least for the ACK response frame to the authentication or association response frames. Therefore the basic rates should already be configured into the driver when those frames are sent. Change the logic to set up the basic rates in the connection preparation that happens for authentication and association (if needed). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12mac80211: refactor common auth/assoc setup codeJohannes Berg1-62/+59
As associating is possible without first authenticating (for FT over DS) association also has to be able to switch to the right channel, insert the station entry etc. Factor out this common code into a new function called ieee80211_prep_connection(). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12mac80211: remove spurious BSSID change flagJohannes Berg1-3/+0
The BSSID has been set a lot earlier already and didn't change again in ieee80211_set_associated(). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12mac80211: simplify wmm check during associationJohannes Berg2-6/+6
Instead of setting assoc_data->wmm_used solely based on the BSS also take into account our own capabilities and later check those. Also rename "wmm_used" and "uapsd_used" to just "wmm" and "uapsd". Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12mac80211: simplify HT checksJohannes Berg1-31/+26
Always set/use IEEE80211_STA_DISABLE_11N instead of duplicating the queue, WMM and HT checks in all places. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12mac80211: move misplaced commentJohannes Berg1-7/+7
Looks like some changes in this area moved the code but not the comment that belongs to the code, move it to the right place. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12mac80211: Disable MCS > 7 in minstrel_ht when STA uses static SMPSHelmut Schaa1-0/+9
Disable multi stream rates (MCS > 7) when a STA is in static SMPS mode since it has only one active rx chain. Hence, it doesn't even make sense to sample multi stream rates. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12mac80211: set channel back after disassociatingJohannes Berg1-7/+6
As we've discussed, we want to avoid channel changes while associated. While the part when we actually associate needs a bit more work, the bit that happens on disassociating can be changed quite easily. Move the channel type change later in the disassociate process to set the channel only after the driver was told that it's now disassociated. As the driver could expect powersave to be enabled only when associated, this thus results in splitting the config call, but overall what happens makes more sense this way. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12mac80211: remove tx_syncJohannes Berg4-120/+0
When the station state callback was added, this was no longer needed in theory. With the iwlwifi changes to remove use of it landing, we can kill the entire tx-sync framework again, RIP. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12mac80211: Limit TID buffering during BA session setup/teardownHelmut Schaa1-0/+6
While setting up or tearing down a BA session mac80211 is buffering pending frames for the according TID. However, there's currently no limit on how many frames are buffered possibly leading to an out-of- memory situation. This can happen on systems with little memory when the CPU is fully loaded since the BA session work is executed in process context while frames can still come via softirq. Apply a limitation to the TIDs pending queue to avoid consuming too much memory in this situation. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07mac80211: fix smatch lock errors in meshThomas Pedersen1-10/+10
smatch was complaining: CHECK net/mac80211/mesh_pathtbl.c net/mac80211/mesh_pathtbl.c:562 mesh_path_add() error: double lock 'bottom_half:' net/mac80211/mesh_pathtbl.c:580 mesh_path_add() error: double unlock 'bottom_half:' net/mac80211/mesh_pathtbl.c:589 mesh_path_add() error: double unlock 'bottom_half:' net/mac80211/mesh_pathtbl.c:691 mpp_path_add() error: double lock 'bottom_half:' net/mac80211/mesh_pathtbl.c:707 mpp_path_add() error: double unlock 'bottom_half:' net/mac80211/mesh_pathtbl.c:716 mpp_path_add() error: double unlock 'bottom_half:' net/mac80211/mesh_pathtbl.c:814 mesh_path_flush_by_nexthop() error: double lock 'bottom_half:' net/mac80211/mesh_pathtbl.c:819 mesh_path_flush_by_nexthop() error: double unlock 'bottom_half:' net/mac80211/mesh_pathtbl.c:887 mesh_path_del() error: double lock 'bottom_half:' net/mac80211/mesh_pathtbl.c:901 mesh_path_del() error: double unlock 'bottom_half:' So don't lock / unlock with _bh() while bottom halves are already disabled. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07mac80211: Fix potential null pointer dereferencingAshok Nagarajan1-6/+7
The patch "{nl,cfg,mac}80211: Implement RSSI threshold for mesh peering" has a potential null pointer dereferencing problem. Thanks to Dan Carpenter for pointing out. This patch will fix the issue. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-07mac80211: Filter duplicate IE idsPaul Stewart4-22/+141
mac80211 is lenient with respect to reception of corrupted beacons. Even if the frame is corrupted as a whole, the available IE elements are still passed back and accepted, sometimes replacing legitimate data. It is unknown to what extent this "feature" is made use of, but it is clear that in some cases, this is detrimental. One such case is reported in http://crosbug.com/26832 where an AP corrupts its beacons but not its probe responses. One approach would be to completely reject frames with invaid data (for example, if the last tag extends beyond the end of the enclosing PDU). The enclosed approach is much more conservative: we simply prevent later IEs from overwriting the state from previous ones. This approach hopes that there might be some salient data in the IE stream before the corruption, and seeks to at least prevent that data from being overwritten. This approach will fix the case above. Further, we flag element structures that contain data we think might be corrupted, so that as we fill the mac80211 BSS structure, we try not to replace data from an un-corrupted probe response with that of a corrupted beacon, for example. Short of any statistics gathering in the various forms of AP breakage, it's not possible to ascertain the side effects of more stringent discarding of data. Signed-off-by: Paul Stewart <pstew@chromium.org> Cc: Sam Leffler <sleffler@chromium.org> Cc: Eliad Peller <eliad@wizery.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06mac80211: Modify tsf via debugfs in mesh interfacesJavier Cardona1-1/+6
Signed-off-by: Javier Cardona <javier@cozybit.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06mac80211: fix mesh airtime link metric estimatingThomas Pedersen3-10/+22
Airtime link metric estimation was broken in HT mesh, use cfg80211_calculate_bitrate to get the right rate value. Also factor out tx rate copying from sta_set_sinfo(). Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-06cfg80211/mac80211: report signal strength for mgmt framesJohannes Berg1-2/+11
Add the signal strength (in dBm only for now) to frames that are received via nl80211's various frame APIs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05mac80211: combine QoS with other BSS changesJohannes Berg4-9/+17
When associating and particularly when disassociating there's no need to notify the driver about changes with multiple calls to bss_info_changed, we should combine the QoS enabling/disabling into the same call as otherwise the driver could get confused about QoS suddenly getting disabled while connected. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05mac80211: use common radiotap code for cooked monitorsJohannes Berg1-30/+9
There's no need to hardcode a subset of the radiotap header for cooked monitor receive, we can just reuse the normal monitor mode radiotap code. This simplifies the code and extends the information available on cooked monitor interfaces. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05mac80211: fix the support of setting non-forwarding entity in MeshChun-Yeow Yeoh2-1/+11
RANN, PREP and PERR propagation should happen only if the dot11MeshForwarding is true. Besides, data frame should not be forwarded if dot11MeshForwarding is false. This redundant checking is necessary to avoid the broadcasted ARP breaking the non-forwarding rule. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05mac80211: add an rx flag for ignoring a packet's signal strengthFelix Fietkau1-3/+6
For A-MPDU rx it makes sense to only process the signal strength once per aggregate instead of once per subframe. Additonally, some hardware (e.g. Atheros) only provides valid signal strength information for the last subframe. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05mac80211: use compare_ether_addr on MAC addresses instead of memcmpFelix Fietkau10-42/+53
Because of the constant size and guaranteed 16 bit alignment, the inline compare_ether_addr function is much cheaper than calling memcmp. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05mac80211: use 16 bit alignment for the if_ibss bssid fieldFelix Fietkau1-1/+1
Several MAC address comparison functions assume 16 bit alignment for pointers passed to them. Since the addition of the control_port field, alignment for the IBSS bssid was off by one, causing a severe performance hit on architectures without efficient unaligned access (e.g. MIPS). Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05{nl,cfg,mac}80211: Implement RSSI threshold for mesh peeringAshok Nagarajan3-1/+25
Mesh peer links are established only if average rssi of the peer candidate satisfies the threshold. This is not in 802.11s specification but was requested by David Fulgham, an open80211s user. This is a way to avoid marginal peer links with stations that are barely within range. This patch adds a new mesh configuration parameter, mesh_rssi_threshold. This feature is supported only for hardwares that report signal in dBm. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-05mac80211: Fix the generation of PREQs in proactive RANN mechanism of HWMPChun-Yeow Yeoh2-5/+19
According to Section Y.7.4 Actions on receipt of proactive RANN, an individually addressed PREQ should be generated towards the neighbor peer mesh STA indicated in the RANN Sender Address field in the forwarding information. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29Merge branch 'master' of ↵John W. Linville2-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-02-29mac80211: handle non-bufferable MMPDUs correctlyJohannes Berg2-8/+13
This renames the IEEE80211_TX_CTL_POLL_RESPONSE TX flag to IEEE80211_TX_CTL_NO_PS_BUFFER and also uses it for non-bufferable MMPDUs (all MMPDUs but deauth, disassoc and action frames.) Previously, mac80211 would let the MMPDU through but not set the flag so drivers supporting some hardware aids for avoiding the PS races would then reject the frame. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29mac80211: make deauth/disassoc sequence more naturalJohannes Berg1-37/+47
The association sequence looks (roughly) like this now: * set BSSID * set station to EXIST state * send auth * set station to AUTH state * send assoc * set station to ASSOC state * set BSS info to associated In contrast, the deauth/disassoc sequence is the other way around: * clear BSSID/BSS info state * remove station * send deauth/disassoc (in some cases the last two steps are reversed.) This patch encodes the entire sequence in the ieee80211_set_disassoc() function and changes it to be like this, for good measure with an explicit flush: * send deauth/disassoc * flush * remove station * clear BSSID/BSS info state At least iwlwifi gets confused with the other sequence in P2P mode and complains that it wasn't able to flush the queues. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29mac80211: fix ieee80211_set_disassoc() sending DelBAJohannes Berg1-3/+3
When ieee80211_set_disassoc() is called with the tx argument set to true, it will send DelBA out to the peer. This isn't useful or necessary in a few cases where we do it today, those being when we lost the connection or when the supplicant explicitly asked us to not tell the AP. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29mac80211: dont call cfg80211 from ieee80211_send_deauth_disassocJohannes Berg1-33/+38
Instead of calling cfg80211 in ieee80211_send_deauth_disassoc() pass out the frame and call it from the caller. That saves the SKB allocation if we don't actually want to send the frame and enables us to make the ordering smarter in the future. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-29cfg80211: remove cookies from callbacksJohannes Berg3-26/+20
In "cfg80211: no cookies in cfg80211_send_XXX()" Holger Schurig removed the cookies in the calls from mac80211 to cfg80211, but the ones in the other direction were left in. Remove them now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-28Merge branch 'rcu/next' of ↵Ingo Molnar1-7/+1
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu The major features of this series are: - making RCU more aggressive about entering dyntick-idle mode in order to improve energy efficiency - converting a few more call_rcu()s to kfree_rcu()s - applying a number of rcutree fixes and cleanups to rcutiny - removing CONFIG_SMP #ifdefs from treercu - allowing RCU CPU stall times to be set via sysfs - adding CPU-stall capability to rcutorture - adding more RCU-abuse diagnostics - updating documentation - fixing yet more issues located by the still-ongoing top-to-bottom inspection of RCU, this time with a special focus on the CPU-hotplug code path. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-27mac80211: remove local_to_hwJohannes Berg4-11/+5
That's a lot longer than open-coding it and doesn't really add value, so just remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-27mac80211: fix sta_info_flush() return valueJohannes Berg1-1/+3
The comment for sta_info_flush() states "Returns the number of removed STA entries" but that isn't actually true. Consequently, the warning when a station is still around on interface removal can never trigger and this delayed finding the timer issue the previous patch fixed. Fix the return value here to make that warning useful again. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 23:20:05 +0000