summaryrefslogtreecommitdiff
path: root/fs/nfs/flexfilelayout/flexfilelayout.h
AgeCommit message (Collapse)AuthorFilesLines
2017-03-17pNFS/flexfiles: never nfs4_mark_deviceid_unavailableWeston Andros Adamson1-1/+13
The flexfiles layout should never mark a device unavailable. Move nfs4_mark_deviceid_unavailable out of nfs4_pnfs_ds_connect and call directly from files layout where it's still needed. The flexfiles driver still handles marked devices in error paths, but will now print a rate limited warning. Signed-off-by: Weston Andros Adamson <dros@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-12-09pNFS/flexfiles: Ensure we have enough buffer for layoutreturnTrond Myklebust1-0/+1
The flexfiles client can piggyback both layout errors and layoutstats as part of the layoutreturn. Both these payloads can get large, with 20 layout error entries taking up about 1.2K, and 4 layoutstats entries taking up another 1K. This patch allows a maximum payload of 4k by allocating a full page. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-08pNFS/flexfiles: Fix a deadlock on LAYOUTGETFred Isaman1-1/+1
We encountered a deadlock where the SEQUENCE that accompanied the LAYOUTGET triggered a session drain, while ff_layout_alloc_lseg triggered a GETDEVICEINFO. The GETDEVICEINFO hung waiting for the session drain, while the LAYOUTGET held the slot waiting for alloc_lseg to finish. Avoid this by moving the call to nfs4_find_get_deviceid out of ff_layout_alloc_lseg and into nfs4_ff_layout_prepare_ds. Signed-off-by: Fred Isaman <fred.isaman@gmail.com> [dros@primarydata.com: pNFS/flexfiles: fix races in ff_layout_mirror_valid] Signed-off-by: Weston Andros Adamson <dros@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-03pNFS/flexfiles: Support sending layoutstats in layoutreturnTrond Myklebust1-0/+3
Add the ability to send an array of layoutstats entries as part of layoutreturn. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-03pNFS/flexfiles: Refactor encoding of the layoutreturn payloadTrond Myklebust1-3/+11
Add the layout error payload to the flexfiles layoutreturn private data, and set up the encoding mechanisms. This is a refactoring in preparation for adding the layout iostats payload. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-12-02pNFS/flexfiles: Only send layoutstats updates for mirrors that were updatedTrond Myklebust1-0/+3
If there have been no reads or writes to a given mirror since the last layoutstats update, then don't resend the same data. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-08-14pNFS/flexfiles: Fix layoutstat periodic reportingTrond Myklebust1-1/+1
Putting the periodicity timer in the mirror instances is causing non-scalable reporting behaviour and missed reporting intervals. When you recall layouts and/or implement client side mirroring, it leads to consecutive reports with only a few ms between RPC calls. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Fixes: d0379a5d066a9 ("pNFS/flexfiles: Support server-supplied...")
2016-05-25nfs/flexfiles: Helper function to detect FF_FLAGS_NO_READ_IOTom Haynes1-1/+10
The mds can inform the client not to use the IOMODE_RW layout segment for doing READs. I.e., it is basically a IOMODE_WRITE layout segment. It would do this to not interfere with the WRITEs. Signed-off-by: Tom Haynes <loghyr@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-17pNFS/flexfiles: When checking for available DSes, conditionally check for MDS ioTom Haynes1-0/+1
Whenever we check to see if we have the needed number of DSes for the action, we may also have to check to see whether IO is allowed to go to the MDS or not. [jlayton: fix merge conflict due to lack of localio patches here] Signed-off-by: Tom Haynes <loghyr@primarydata.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-09nfs: have flexfiles mirror keep creds for both ro and rw layoutsJeff Layton1-1/+2
A mirror can be shared between multiple layouts, even with different iomodes. That makes stats gathering simpler, but it causes a problem when we get different creds in READ vs. RW layouts. The current code drops the newer credentials onto the floor when this occurs. That's problematic when you fetch a READ layout first, and then a RW. If the READ layout doesn't have the correct creds to do a write, then writes will fail. We could just overwrite the READ credentials with the RW ones, but that would break the ability for the server to fence the layout for reads if things go awry. We need to be able to revert to the earlier READ creds if the RW layout is returned afterward. The simplest fix is to just keep two sets of creds per mirror. One for READ layouts and one for RW, and then use the appropriate set depending on the iomode of the layout segment. Also fix up some RCU nits that sparse found. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-09nfs: get a reference to the credential in ff_layout_alloc_lsegJeff Layton1-2/+0
We're just as likely to have allocation problems here as we would if we delay looking up the credential like we currently do. Fix the code to get a rpc_cred reference early, as soon as the mirror is set up. This allows us to eliminate the mirror early if there is a problem getting an rpc credential. This also allows us to drop the uid/gid from the layout_mirror struct as well. In the event that we find an existing mirror where this one would go, we swap in the new creds unconditionally, and drop the reference to the old one. Note that the old ff_layout_update_mirror_cred function wouldn't set this pointer unless the DS version was 3, but we don't know what the DS version is at this point. I'm a little unclear on why it did that as you still need creds to talk to v4 servers as well. I have the code set it regardless of the DS version here. Also note the change to using generic creds instead of calling lookup_cred directly. With that change, we also need to populate the group_info pointer in the acred as some functions expect that to never be NULL. Instead of allocating one every time however, we can allocate one when the module is loaded and share it since the group_info is refcounted. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2015-12-28pNFS/flexfiles: Support server-supplied layoutstats sampling periodTrond Myklebust1-0/+1
Some servers want to be able to control the frequency with which clients report layoutstats, for instance, in order to monitor QoS for a particular file or set of file. In order to support this, the flexfiles layout allows the server to pass this info as a hint in the layout payload. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-02pNFS/flexfiles: Add support for FF_FLAGS_NO_IO_THRU_MDSTrond Myklebust1-0/+7
For loosely coupled pNFS/flexfiles systems, there is often no advantage at all in going through the MDS for I/O, since the MDS is subject to the same limitations as all other clients when talking to DSes. If a DS is unresponsive, I/O through the MDS will fail. For such systems, the only scalable solution is to have the pNFS clients retry doing pNFS, and so the protocol now provides a flag that allows the pNFS server to signal this. If LAYOUTGET returns FF_FLAGS_NO_IO_THRU_MDS, then we should assume that the MDS wants the client to retry using these devices, even if they were previously marked as being unavailable. To do so, we add a helper, ff_layout_mark_devices_valid() that will be called from layoutget. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-08-25NFSv4.1/flexfile: Ensure uniqueness of mirrors across layout segmentsTrond Myklebust1-0/+3
Keep the full list of mirrors in the struct nfs4_ff_layout_mirror so that they can be shared among the layout segments that use them. Also ensure that we send out only one copy of the layoutstats per mirror. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-08-25NFSv4.1/flexfiles: Remove mirror backpointer to lseg.Trond Myklebust1-1/+0
When we start sharing mirrors between several lsegs, we won't be able to keep it. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-08-25NFSv4.1/flexfiles: Add refcounting to struct nfs4_ff_layout_mirrorTrond Myklebust1-0/+1
We do want to share mirrors between layout segments, so add a refcount to enable that. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-26pNFS/flexfiles: Turn off layoutcommit for servers that don't need itTrond Myklebust1-0/+3
This patch ensures that we record the value of 'ffl_flags' from the layout, and then checks for the presence of the FF_FLAGS_NO_LAYOUTCOMMIT flag before deciding whether or not to call pnfs_set_layoutcommit(). The effect is that servers now can decide whether or not they want the client to call layoutcommit before returning a writeable layout. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-24pnfs/flexfiles: report layoutstat regularlyPeng Tao1-1/+5
As a simple scheme, report every minute if IO is still going on. Reviewed-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-24pnfs/flexfiles: encode LAYOUTSTATS flexfiles specific dataPeng Tao1-0/+1
Reviewed-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-24pNFS/flexfiles: track when layout is first usedPeng Tao1-0/+1
So that we can report cumulative time since the beginning of statistics collection of the layout. Reviewed-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-24pNFS/flexfiles: add layoutstats trackingTrond Myklebust1-0/+22
Reviewed-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-06-24pNFS/flexfiles: Remove unused struct members user_name, group_nameTrond Myklebust1-2/+0
Reviewed-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-02-03pnfs/flexfiles: Add the FlexFile Layout DriverTom Haynes1-0/+155
The flexfile layout is a new layout that extends the file layout. It is currently being drafted as a specification at https://datatracker.ietf.org/doc/draft-ietf-nfsv4-layout-types/ Signed-off-by: Weston Andros Adamson <dros@primarydata.com> Signed-off-by: Tom Haynes <loghyr@primarydata.com> Signed-off-by: Tao Peng <bergwolf@primarydata.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 15:54:24 +0000