summaryrefslogtreecommitdiff
path: root/drivers/spi
AgeCommit message (Collapse)AuthorFilesLines
2010-10-02of/spi: Fix OF-style driver binding of spi devicesSinan Akman1-0/+5
This patch adds the OF hook to the spi core so that devices can automatically be registered based on device tree data. This fixes a problem with spi devices not binding to drivers after the cleanup of the spi & i2c binding code. Signed-off-by: Sinan Akman <sinan@writeme.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-10-02spi: spi-gpio.c tests SPI_MASTER_NO_RX bit twice, but not SPI_MASTER_NO_TXRoel Kluin1-1/+1
The SPI_MASTER_NO_TX bit (can't do buffer write) wasn't tested. This code was introduced in commit 3c8e1a84 (spi/spi-gpio: add support for controllers without MISO or MOSI pin). This patch fixes a bug in choosing which transfer ops to use. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-09-16spi/mpc8xxx: fix buffer overrun on large transferschristophe leroy1-2/+8
It fixes an issue when sending-only or receiving-only more than PAGE_SIZE bytes. Signed-off-by: christophe leroy <christophe.leroy@c-s.fr> Acked-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-09-08spi/pl022: move probe call to subsys_initcall()Linus Walleij1-1/+1
The PL022 SPI bus is sometimes used for early stuff like regulators that need to be present at module_init() time, so we move this to a subsys_initcall(). Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-09-08spi/pl022: fix APB pclk power regression on U300Linus Walleij1-6/+8
With the introduction of an AMBA PrimeCell per-cell block clock, the pclk was left on after probe() unless explicitly disabled. This clock is wired to the same clock on PL022 causing it to stay always on since. Fix this up properly by clocking the pclk whenever we want to write into any PL022 registers and clocking the external clock whenever we want to transmit messages on the bus. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Tested-by : Kevin Wells <wellsk40@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-09-08spi/spi_s3c64xx: Warn if PIO transfers time outMark Brown1-0/+6
When using PIO we have a timeout for the TX and RX FIFOs to ensure that the data actually gets transferred. Warn if we hit that timeout - it should never happen, but this makes sure we'll find out if it does. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-09-08spi/s3c64xx: Fix incorrect reuse of 'val' local variable.Jassi Brar1-2/+3
Instead of, wrongly, reusing the 'val' variable, use a dedicated one for reading the status register. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-09-08spi/s3c64xx: Fix compilation warningJassi Brar1-2/+3
Fix compilation warning by typecasting the tx_buf pointer. [I'm not thrilled with resorting to a cast; but I cannot see a better way to go about this. I don't want to drop the const from struct spi_transfer ~~glikely] Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-09-08spi/dw_spi: clean the cs_control codeFeng Tang1-12/+5
commit 052dc7c45i "spi/dw_spi: conditional transfer mode change" introduced cs_control code, which has a bug by using bit offset for spi mode to set transfer mode in control register. Also it forces devices who don't need cs_control to re-configure the control registers for each spi transfer. This patch will fix them Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-09-08spi/dw_spi: Allow interrupt sharingYong Wang1-1/+6
Allow interrupt sharing since exclusive interrupt line for DW SPI controller is not provided on every platform. Signed-off-by: Yong Wang <yong.y.wang@intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-09-08spi/spi_s3c64xx: Increase dead reckoning time in wait_for_xfer()Mark Brown1-1/+1
For small transfers at high speeds the expected transfer time can easily be well under 1ms, causing the delay in wait_for_xfer() to be only the dead reckoning fudge factor of 5ms currently included. Experiments on some of my systems shows that this is marginal for some transfers so double it to 10ms. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-09-08spi/spi_s3c64xx: Move to subsys_initcall()Mark Brown1-1/+1
Allow the use of the S3C64xx SPI controller with things like PMICs by moving the init up to subsys_initcall(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-09-01spi: free children in spi_unregister_master, not siblingsDavid Lamparter1-6/+3
introduced by 49dce689 ("spi doesn't need class_device") and bad-fixed by 350d0076 ("spi: fix double-free on spi_unregister_master"), spi_unregister_master would previously device_unregister all of the spi master's siblings (instead of its children). hilarity ensues. fix it to unregister children. Signed-off-by: David Lamparter <equinox@diac24.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-09-01spi/spi_s3c64xx: Staticise non-exported functionsMark Brown1-4/+4
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-09-01spi/spi_s3c64xx: Make probe more robust against missing board configMark Brown1-2/+7
The S3C64xx SPI driver requires the machine to call s3c64xx_spi_set_info() to select a few options, including the clock to use for the SPI controller. If this is not done then a NULL will be passed as the clock name for clk_get(), causing an obscure crash. Guard against this and other missing configuration by validating that the clock name has been filled in in the platform data that ets passed in. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-08-18m68knommu: include sched.h in ColdFire/SPI driverGreg Ungerer1-0/+1
Using the coldfire qspi driver, I get the following error: drivers/spi/coldfire_qspi.c: In function 'mcfqspi_irq_handler': drivers/spi/coldfire_qspi.c:166: error: 'TASK_NORMAL' undeclared (first use in this function) drivers/spi/coldfire_qspi.c:166: error: (Each undeclared identifier is reported only once It is solved by adding the following include to coldfire_sqpi.c: #include <linux/sched.h> Fix suggested by Jate Sujjavanich <jsujjavanich@syntech-fuelmaster.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-08-14Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds11-99/+325
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: spi/amba_pl022: Fix probe and remove hook section annotations. spi/mpc5121: change annotations for probe and remove functions spi/bitbang: reinitialize transfer parameters for every message spi/spi-gpio: add support for controllers without MISO or MOSI pin spi/bitbang: add support for SPI_MASTER_NO_{TX, RX} modes SPI100k: Fix 8-bit and RX-only transfers spi/mmc_spi: mmc_spi adaptations for SPI bus locking API spi/mmc_spi: SPI bus locking API, using mutex Fix trivial conflict in drivers/spi/mpc512x_psc_spi.c due to 'struct of_device' => 'struct platform_device' rename and __init/__exit to __devinit/__devexit fix.
2010-08-06of/device: Replace struct of_device with struct platform_deviceGrant Likely6-14/+14
of_device is just an alias for platform_device, so remove it entirely. Also replace to_of_device() with to_platform_device() and update comment blocks. This patch was initially generated from the following semantic patch, and then edited by hand to pick up the bits that coccinelle didn't catch. @@ @@ -struct of_device +struct platform_device Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reviewed-by: David S. Miller <davem@davemloft.net>
2010-08-01of/address: Clean up function declarationsGrant Likely3-0/+3
This patch moves the declaration of of_get_address(), of_get_pci_address(), and of_pci_address_to_resource() out of arch code and into the common linux/of_address header file. This patch also fixes some of the asm/prom.h ordering issues. It still includes some header files that it ideally shouldn't be, but at least the ordering is consistent now so that of_* overrides work. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-08-01spi/amba_pl022: Fix probe and remove hook section annotations.Kevin Wells1-3/+3
Probe and remove hooks belong in the __devinit and __devexit sections respectively. This patch fixes incorrect annotations on the pl022 spi driver. Signed-off-by: Kevin Wells <wellsk40@gmail.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-07-30of/spi: call of_register_spi_devices() from spi core codeAnatolij Gustschin8-17/+13
Move of_register_spi_devices() call from drivers to spi_register_master(). Also change the function to use the struct device_node pointer from master spi device instead of passing it as function argument. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-07-25Merge commit 'v2.6.35-rc6' into spi/testGrant Likely1-22/+0
2010-07-11powerpc/cpm: Reintroduce global spi_pram struct (fixes build issue)Anton Vorontsov1-22/+0
spi_t was removed in commit 644b2a680ccc51a9ec4d6beb12e9d47d2dee98e2 ("powerpc/cpm: Remove SPI defines and spi structs"), the commit assumed that spi_t isn't used anywhere outside of the spi_mpc8xxx driver. But it appears that the struct is needed for micropatch code. So, let's reintroduce the struct. Fixes the following build issue: CC arch/powerpc/sysdev/micropatch.o micropatch.c: In function 'cpm_load_patch': micropatch.c:629: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token micropatch.c:629: error: 'spp' undeclared (first use in this function) micropatch.c:629: error: (Each undeclared identifier is reported only once micropatch.c:629: error: for each function it appears in.) Reported-by: LEROY Christophe <christophe.leroy@c-s.fr> Reported-by: Tony Breeds <tony@bakeyournoodle.com> Cc: <stable@kernel.org> [ .33, .34 ] Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-05spi/mpc5121: change annotations for probe and remove functionsAnatolij Gustschin1-8/+8
Change annotations from __init/__exit to __devinit/__devexit to get rid of section mismatch warning. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-07-03spi/bitbang: reinitialize transfer parameters for every messageBrian Niebuhr1-6/+3
This patch fixes the setup_transfer logic to account for the case where multiple messages to different SPI devices are in the queue simultaneously. With the current logic, the second message in the queue will end up using the transfer parameters for the previous message in the queue. The fix is to reinitialize the transfer parameters for each message rather than only once on the first message. Signed-off-by: Brian Niebuhr <bniebuhr@efjohnson.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-07-03spi/spi-gpio: add support for controllers without MISO or MOSI pinMarek Szyprowski1-18/+83
There are some boards that do not strictly follow SPI standard and use only 3 wires (SCLK, MOSI or MISO, SS) for connecting some simple auxiliary chips and controls them with GPIO based 'spi controller'. In this configuration the MISO or MOSI line is missing (it is not required if the chip does not transfer any data back to host or host only reads data from chip). This patch adds support for such non-standard configuration in GPIO-based SPI controller. It has been tested in configuration without MISO pin. Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-07-03spi/bitbang: add support for SPI_MASTER_NO_{TX, RX} modesMarek Szyprowski6-20/+24
This patch adds a new flags argument to bitbang_txrx_be_cpha0 and bitbang_txrx_be_cpha1 transfer functions. This enables support for SPI_MASTER_NO_{TX,RX} transfer modes. The change should have no impact on speed of the existing drivers. bitbank_txrx_* functions are usually inlined into the drivers. When the argument is equal to constant zero, the optimizer would be able to eliminate the dead code (flags checks) easily. Tested on ARM and GCC 4.4.x and in all cases the checks were eliminated in the inlined function. Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-07-03SPI100k: Fix 8-bit and RX-only transfersCory Maccarrone1-11/+12
This change fixes 8-bit transfers and RX-only transfers. The SPI100k framework requires minimum 16-bit words to be written, so 8-bit transfers must be shited by 8 bits and sent out as a 16-bit word. Additionally, receive-only transfers were failing due to the perceived need to fill the TX buffer with something. This is in fact not needed. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-06-28spi/mmc_spi: SPI bus locking API, using mutexErnst Schwab1-33/+192
SPI bus locking API to allow exclusive access to the SPI bus, especially, but not limited to, for the mmc_spi driver. Coded according to an outline from Grant Likely; here is his specification (accidentally swapped function names corrected): It requires 3 things to be added to struct spi_master. - 1 Mutex - 1 spin lock - 1 flag. The mutex protects spi_sync, and provides sleeping "for free" The spinlock protects the atomic spi_async call. The flag is set when the lock is obtained, and checked while holding the spinlock in spi_async(). If the flag is checked, then spi_async() must fail immediately. The current runtime API looks like this: spi_async(struct spi_device*, struct spi_message*); spi_sync(struct spi_device*, struct spi_message*); The API needs to be extended to this: spi_async(struct spi_device*, struct spi_message*) spi_sync(struct spi_device*, struct spi_message*) spi_bus_lock(struct spi_master*) /* although struct spi_device* might be easier */ spi_bus_unlock(struct spi_master*) spi_async_locked(struct spi_device*, struct spi_message*) spi_sync_locked(struct spi_device*, struct spi_message*) Drivers can only call the last two if they already hold the spi_master_lock(). spi_bus_lock() obtains the mutex, obtains the spin lock, sets the flag, and releases the spin lock before returning. It doesn't even need to sleep while waiting for "in-flight" spi_transactions to complete because its purpose is to guarantee no additional transactions are added. It does not guarantee that the bus is idle. spi_bus_unlock() clears the flag and releases the mutex, which will wake up any waiters. The difference between spi_async() and spi_async_locked() is that the locked version bypasses the check of the lock flag. Both versions need to obtain the spinlock. The difference between spi_sync() and spi_sync_locked() is that spi_sync() must hold the mutex while enqueuing a new transfer. spi_sync_locked() doesn't because the mutex is already held. Note however that spi_sync must *not* continue to hold the mutex while waiting for the transfer to complete, otherwise only one transfer could be queued up at a time! Almost no code needs to be written. The current spi_async() and spi_sync() can probably be renamed to __spi_async() and __spi_sync() so that spi_async(), spi_sync(), spi_async_locked() and spi_sync_locked() can just become wrappers around the common code. spi_sync() is protected by a mutex because it can sleep spi_async() needs to be protected with a flag and a spinlock because it can be called atomically and must not sleep Signed-off-by: Ernst Schwab <eschwab@online.de> [grant.likely@secretlab.ca: use spin_lock_irqsave()] Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Matt Fleming <matt@console-pimps.org> Tested-by: Antonio Ospite <ospite@studenti.unina.it>
2010-06-02of/spi: mpc512x_psc_spi.c: Fix build failuresAnatolij Gustschin1-6/+6
Fixes build errors caused by the: - OF device_node pointer being moved into struct device - removal of the match_table field from struct of_platform_driver Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-06-02of/spi: Fix build failure on spi_ppc4xx.cGrant Likely1-1/+1
This patch fixes a build error caused by the OF device_node pointer being moved into struct device. Fixes bug introduced by commit 61c7a080a5a061c976988fd4b844dfb468dda255 (of: Always use 'struct device.of_node' to get device node pointer) Signed-off-by: Grant Likely <grant.likely@secretlab.ca> CC: Sean MacLennan <smaclennan@pikatech.com> CC: spi-devel-general@lists.sourceforge.net CC: devicetree-discuss@lists.ozlabs.org
2010-05-25spi/xilinx: Fix compile errorGrant Likely1-4/+4
Commit 58f9b0b02414062eaff46716bc04b47d7e79add5, "of: eliminate of_device->node and dev_archdata->{of,prom}_node" changed the location of the device_node pointer. Most drivers were converted to the new location, but the xilinx_spi_of driver was missed and now fails to compile. This patch fixes up the xilinx_spi_of driver to use the new location. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25Merge remote branch 'origin' into secretlab/next-spiGrant Likely7-43/+46
2010-05-25spi/davinci: Fix clock prescale factor computationThomas Koeller1-3/+9
Computation of the clock prescaler value returned bogus results if the requested SPI clock was impossible to set. It now sets either the maximum or minimum clock frequency, as appropriate. Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25spi: move bitbang txrx utility functions to private headerhartleys6-10/+98
A number of files in drivers/spi fail checkincludes.pl due to the double include of <linux/spi/spi_bitbang.h>. The first include is needed to get the struct spi_bitbang definition and the spi_bitbang_* function prototypes. The second include happens after defining EXPAND_BITBANG_TXRX to get the inlined bitbang_txrx_* utility functions. The <linux/spi/spi_bitbang.h> header is also included by a number of other spi drivers, as well as some arch/ code, in order to use struct spi_bitbang and the associated functions. To fix the double include, and remove any potential confusion about it, move the inlined bitbang_txrx_* functions to a new private header in drivers/spi and also remove the need to define EXPAND_BITBANG_TXRX. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25spi/mpc5121: Add SPI master driver for MPC5121 PSCAnatolij Gustschin3-0/+584
Signed-off-by: John Rigby <jcrigby@gmail.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25spi/ep93xx: implemented driver for Cirrus EP93xx SPI controllerMika Westerberg3-0/+949
This patch adds an SPI master driver for the Cirrus EP93xx SPI controller found in EP93xx chips. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25spi/omap2_mcspi: Check params before dereference or useScott Ellis1-8/+11
Check spi->chip_select for range before use. Signed-off-by: Scott Ellis <scott@jumpnowtek.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25spi/omap2_mcspi: add turbo mode supportRoman Tereshonkov1-21/+111
Turbo mode allows to read data to shift register when rx-buffer is full thus improving the perfomance. This feature is available for RX-only mode. In PIO turbo mode when the penultimate word is available in RX-buffer the controller should be disabled before reading data to prevent the next transaction triggering. The controller itself handles the last word to be correctly loaded to shift-register and then transferred to RX-buffer. The turbo mode is enabled by setting turbo_mode parameter to 1. This parameter is a part of omap2_mcspi_device_config structure which is passed through the spi_device controller_data pointer. Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25spi/omap2_mcspi: change default DMA_MIN_BYTES value to 160Roman Tereshonkov1-1/+1
The value 160 has been obtained as optimal in testing it for wl1271 which use spi for communication. In some sense this change might also influence on other spi devices connected to omap2_mcspi controller. Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25spi/pl022: fix stop queue procedureGrzegorz Sygieda1-1/+1
This fix prevents queue being marked as "stopped", if data exists in the queue list. Signed-off-by: Grzegorz Sygieda <grzegorz.sygieda@tieto.com> Signed-off-by: Lukasz Baj <lukasz.baj@tieto.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25spi/pl022: add support for the PL023 derivateLinus Walleij1-16/+74
This adds support for a further ST variant of the PL022 called PL023. Some differences in the control registers due to being stripped down to SPI mode only, and a new clock feedback sample delay config setting is available. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25spi/pl022: fix up differences between ARM and ST versionsLinus Walleij1-56/+122
The PL022 SPI driver did not cleanly separate between the original unmodified ARM version and the ST Microelectronics versions. Split this more cleanly and fix some whitespace moaning from checkpatch at the same time. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25spi/spi_mpc8xxx: Do not use map_tx_dma to unmap rx_dmaJoakim Tjernlund1-1/+1
This fixes a typo were map_tx_dma is used instead of map_rx_dma, casing the driver to unmap rx_dma when it shouldn't. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25spi/spi_mpc8xxx: Fix QE mode Litte EndianJoakim Tjernlund1-31/+70
QE mode uses Little Endian so words > 8 bits are byte swapped. Workaround this by always enforcing wordsize 8 for words > 8 bits. Unfortunately this will not work for LSB transfers where wordsize is > 8 bits so disable these for now. Also move the different quirks into its own function to keep mpc8xxx_spi_setup_transfer() sane. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-22spi/spi_mpc8xxx: fix potential memory corruption.Joakim Tjernlund1-4/+3
tx_dma/rx_dma are already set to a dummy buffer when no tx/rx buffer and t->tx_dma/t->rx_dma does not contain a dma address, but NULL. This may lead to corruption of kernel memory. Fix this by leaving tx_dma/rx_dma alone. Do not INIT_TX_RX while controller is enabled, this is bad according to the MPC8321 manual. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-22Merge remote branch 'origin' into secretlab/next-devicetreeGrant Likely5-22/+24
Merging in current state of Linus' tree to deal with merge conflicts and build failures in vio.c after merge. Conflicts: drivers/i2c/busses/i2c-cpm.c drivers/i2c/busses/i2c-mpc.c drivers/net/gianfar.c Also fixed up one line in arch/powerpc/kernel/vio.c to use the correct node pointer. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-22of: Remove duplicate fields from of_platform_driverGrant Likely5-10/+13
.name, .match_table and .owner are duplicated in both of_platform_driver and device_driver. This patch is a removes the extra copies from struct of_platform_driver and converts all users to the device_driver members. This patch is a pretty mechanical change. The usage model doesn't change and if any drivers have been missed, or if anything has been fixed up incorrectly, then it will fail with a compile time error, and the fixup will be trivial. This patch looks big and scary because it touches so many files, but it should be pretty safe. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sean MacLennan <smaclennan@pikatech.com>
2010-05-21Merge branch 'omap-for-linus' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (113 commits) omap4: Add support for i2c init omap: Fix i2c platform init code for omap4 OMAP2 clock: fix recursive spinlock attempt when CONFIG_CPU_FREQ=y OMAP powerdomain, hwmod, omap_device: add some credits OMAP4 powerdomain: Support LOWPOWERSTATECHANGE for powerdomains OMAP3 clock: add support for setting the divider for sys_clkout2 using clk_set_rate OMAP4 powerdomain: Fix pwrsts flags for ALWAYS ON domains OMAP: timers: Fix clock source names for OMAP4 OMAP4 clock: Support clk_set_parent OMAP4: PRCM: Add offset defines for all CM registers OMAP4: PRCM: Add offset defines for all PRM registers OMAP4: PRCM: Remove duplicate definition of base addresses OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention OMAP4: CM: Remove non-functional registers in ES1.0 OMAP: hwmod: Replace WARN by pr_warning for clockdomain check OMAP: hwmod: Rename hwmod name for the MPU OMAP: hwmod: Do not exit the iteration if one clock init failed OMAP: hwmod: Replace WARN by pr_warning if clock lookup failed OMAP: hwmod: Remove IS_ERR check with omap_clk_get_by_name return value OMAP: hwmod: Fix wrong pointer iteration in oh->slaves ...
2010-05-20Merge branch 'omap4-i2c-init' into omap-for-linusTony Lindgren1-13/+12
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 19:44:55 +0000