summaryrefslogtreecommitdiff
path: root/drivers/soc/qcom/smd.c
AgeCommit message (Collapse)AuthorFilesLines
2016-09-01soc: qcom: smd: Reset rx tail rather than txBjorn Andersson1-1/+1
The local end of each SMD channel is responsible for updating the tx head and the rx tail, as such we should not touch the tx tail during a reset. Reported-by: Jeremy McNicoll <jmcnicol@redhat.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-08-23soc: qcom: smd: Represent smd edges as devicesBjorn Andersson1-75/+122
By representing each edge as its own device the channels are no longer tied to being parented by the same smd device and as such an edge can live as children of e.g. remoteproc instances. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-08-23soc: qcom: smd: Request irqs after parsing propertiesBjorn Andersson1-16/+16
The code exectued by the interrupt handler depends on the values parsed after requesting the irq, just to be save we should therefor move the request_irq() call to be done after parsing the properties. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-08-23soc: qcom: smd: Simplify multi channel handlingBjorn Andersson1-18/+16
Multi-channel clients split between several drivers need a way to close individual channels, as these drivers might be removed individually. With this in place the responsibility of closing additionally opened channels to the client as well only concerning smd about the primary channel. With this approach we will only trigger removal of SMD devices based on the state of the primary channel, however we get in sync with how rpmsg works. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-04-19soc: qcom: smd: Make callback pass channel referenceBjorn Andersson1-4/+18
By passing the smd channel reference to the callback, rather than the smd device, we can open additional smd channels from sub-devices of smd devices. Also updates the two smd clients today found in mainline. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-03-30soc: qcom: smd: Support opening additional channelsBjorn Andersson1-0/+76
With the qcom_smd_open_channel() API we allow SMD devices to open additional SMD channels, to allow implementation of multi-channel SMD devices - like Bluetooth. Channels are opened from the same edge as the calling SMD device is tied to. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-03-30soc: qcom: smd: Support multiple channels per sdevBjorn Andersson1-3/+11
This patch allows chaining additional channels to a SMD device, enabling implementation of multi-channel SMD devies - like Bluetooth. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-03-30soc: qcom: smd: Refactor channel open and close handlingBjorn Andersson1-22/+40
Refactor opening and closing of channels into two separate functions instead of open coding this in the various places. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-03-30soc: qcom: smd: Split discovery and state change workBjorn Andersson1-27/+31
Split the two steps of channel discovery and state change handling into two different workers. This allows for new channels to be found while we're are probing, which is required as we introduce multi-channel support. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-03-30soc: qcom: smd: Introduce callback setterBjorn Andersson1-8/+17
Introduce a setter for the callback function pointer to clarify the locking around the operation and to reduce some duplication. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-01-20drivers/soc/qcom/smd.c: use __ioread32_copy() instead of open-coding itStephen Boyd1-9/+4
Now that we have a generic library function for this, replace the open-coded instance. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Cc: <zajec5@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-10-14soc: qcom: smd: delete unneeded of_node_putJulia Lawall1-3/+1
Device node iterators perform an of_node_put on each iteration, so putting an of_node_put before a continue results in a double put. A simplified version of the semantic match that finds this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root,e; local idexpression child; iterator i; @@ i(..., child, ...) { ... when != of_node_get(child) * of_node_put(child); ... * continue; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-10-14soc: qcom: smd: Correct SMEM items for upper channelsBjorn Andersson1-2/+2
Update the SMEM items for the second set of SMD channels, as these where incorrect. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-10-14soc: qcom: smd: Reject send of too big packetsBjorn Andersson1-0/+4
Attempting to find room for a packet that's bigger than the fifo will never succeed and the calling process will be sleeping forever in the loop, waiting for enough room. So fail early instead. Reported-by: Courtney Cavin <courtney.cavin@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Reviewed-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-10-14soc: qcom: smd: Handle big endian CPUsStephen Boyd1-65/+116
The smd structures are always in little endian, but the smd driver is not capable of being used on big endian CPUs. Annotate the little endian data members and update the code to do the proper byte swapping. Cc: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-10-14soc: qcom: smd: Use __iowrite32_copy() instead of open-coding itStephen Boyd1-9/+4
We already have a function to do this and it silences some sparse warnings along the way. Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-10-14soc: qcom: smd: Represent channel layout in structuresStephen Boyd1-28/+33
The rx and tx channel info are laid out in memory next to each other, and there are two types of channel info structures, byte based and word based. We have 4 pointers to these info structures, when we really only need two to point to the different types of structures. Encapsulate the byte based and word based tx/rx structures in a "channel pair" structure that describes the layout of memory and reduces the number of pointers in the smd channel structure by two. Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-10-14soc: qcom: Make qcom_smem_get() return a pointerStephen Boyd1-15/+15
Passing a void ** almost always requires a cast at the call site. Instead of littering the code with casts every time this function is called, have qcom_smem_get() return a void pointer to the location of the smem item. This frees the caller from having to cast the pointer. Cc: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-10-14soc: qcom: smd: Implement id_table driver matchingBjorn Andersson1-7/+18
Implement a id_table based driver maching mechanism for drivers that binds to fixed channels and doesn't need any additional configuration, e.g. IPCRTR and DIAG. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-09-09soc: qcom: smd: Correct fBLOCKREADINTR handlingBjorn Andersson1-3/+3
fBLOCKREADINTR is masking the notification from the remote and should hence be cleared while we're waiting the tx fifo to drain. Also change the reset state to mask the notification, as send is the only use case where we're interested in it. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-09-09soc: qcom: smd: Use correct remote processor IDAndy Gross1-4/+12
This patch fixes SMEM addressing issues when remote processors need to use secure SMEM partitions. Signed-off-by: Andy Gross <agross@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
2015-07-29soc: qcom: Add Shared Memory DriverBjorn Andersson1-0/+1319
This adds the Qualcomm Shared Memory Driver (SMD) providing communication channels to remote processors, ontop of SMEM. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Andy Gross <agross@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 09:48:02 +0000