summaryrefslogtreecommitdiff
path: root/drivers/leds
AgeCommit message (Collapse)AuthorFilesLines
2011-05-26leds: Add ASIC3 LED supportPaul Parsons3-0/+176
Add LED support for the HTC ASIC3. Underlying support is provided by the mfd/asic3 and leds/leds-asic3 drivers. An example configuration is provided by the pxa/hx4700 platform. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Use mfd cell platform_data for 88pm860x cells platform bitsSamuel Ortiz1-6/+1
With the addition of a platform device mfd_cell pointer, MFD drivers can go back to passing platform back to their sub drivers. This allows for an mfd_cell->mfd_data removal and thus keep the sub drivers MFD agnostic. This is mostly needed for non MFD aware sub drivers. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Use mfd cell platform_data for mc13xxx cells platform bitsSamuel Ortiz1-4/+3
With the addition of a platform device mfd_cell pointer, MFD drivers can go back to passing platform data back to their sub drivers. This allows for an mfd_cell->mfd_data removal and thus keep the sub drivers MFD agnostic. This is mostly needed for non MFD aware sub drivers. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-25leds: provide helper to register "leds-gpio" devicesUwe Kleine-König3-0/+50
This function makes a deep copy of the platform data to allow it to live in init memory. For a kernel that supports several machines and so includes the definition for several leds-gpio devices this saves quite some memory because all but one definition can be free'd after boot. As the function is used by arch code it must be builtin and so cannot go into leds-gpio.c. [akpm@linux-foundation.org: s/CONFIG_LED_REGISTER_GPIO/CONFIG_LEDS_REGISTER_GPIO/] Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Acked-by: Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: H Hartley Sweeten <hartleys@visionengravers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25drivers/leds/leds-lm3530.c: add regulatorShreshtha Kumar Sahu1-8/+65
Add add regulator support to lm3530 driver. The lm3530 driver needs to get proper regulator during device probe and enable it before accessing the device. Also it disables the regulator in case of brightness == LED_OFF, and puts it back during driver removal. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25leds: remove the leds-h1940 driverVasily Khoruzhick3-178/+0
The H1940 machine now uses leds-gpio and leds-h1940 has no users anymore. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Cc: "Arnaud Patard (Rtp)" <arnaud.patard@rtp-net.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25drivers/leds/leds-pca9532.c: add support pca9530, pca9531 and pca9533Jan Weitzel1-22/+62
The pca953x family are only different in number of leds and register layout Adding chipinfo to use driver with whole pca953x family Rename driver to pca953x, but left files and platformflags named pca9532. Tested with pca9530 and pca9533 Tested-by: Juergen Kilb <j.kilb@phytec.de> Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Acked-by: Joachim Eastwood <joachim.eastwood@jotron.com> Tested-by: Joachim Eastwood <joachim.eastwood@jotron.com> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25drivers/leds/leds-pca9532.c: add gpio capabilityJoachim Eastwood2-3/+120
Allow unused leds on pca9532 to be used as gpio. The board I am working on now has no less than 6 pca9532 chips. One chips is used for only leds, one has 14 leds and 2 gpio and the rest of the chips are gpio only. There is also one board in mainline which could use this capabilty; arch/arm/mach-iop32x/n2100.c 232 { .type = PCA9532_TYPE_NONE }, /* power OFF gpio */ 233 { .type = PCA9532_TYPE_NONE }, /* reset gpio */ This patch defines a new pin type, PCA9532_TYPE_GPIO, and registers a gpiochip if any pin has this type set. The gpio will registers all chip pins but will filter on gpio_request. [randy.dunlap@oracle.com: fix build when GPIOLIB is not enabled] Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Jan Weitzel <j.weitzel@phytec.de> Cc: Juergen Kilb <j.kilb@phytec.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25leds: support automatic start of blinking with ledtrig-timerEsben Haabendal3-1/+12
By setting initial values blink_delay_on and blink_delay_off in a led_classdev struct, this change starts the blinking when the led is initialized. With this patch, you can initialize blink_delay_on and blink_delay_off in led_classdev with default_trigger set to "timer", and the led will start up blinking. The current ledtrig-timer implementation ignores any initial blink_delay_on/blink_delay_off settings, and requires setting blink_delay_on/blink_delay_off (typically from userspace) before the led blinks. Signed-off-by: Esben Haabendal <eha@doredevelopment.dk> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-23Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) b43: fix comment typo reqest -> request Haavard Skinnemoen has left Atmel cris: typo in mach-fs Makefile Kconfig: fix copy/paste-ism for dell-wmi-aio driver doc: timers-howto: fix a typo ("unsgined") perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course'). treewide: fix a few typos in comments regulator: change debug statement be consistent with the style of the rest Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations" audit: acquire creds selectively to reduce atomic op overhead rtlwifi: don't touch with treewide double semicolon removal treewide: cleanup continuations and remove logging message whitespace ath9k_hw: don't touch with treewide double semicolon removal include/linux/leds-regulator.h: fix syntax in example code tty: fix typo in descripton of tty_termios_encode_baud_rate xtensa: remove obsolete BKL kernel option from defconfig m68k: fix comment typo 'occcured' arch:Kconfig.locks Remove unused config option. treewide: remove extra semicolons ...
2011-05-18drivers/leds/leds-lm3530.c: add MODULE_DEVICE_TABLEAxel Lin1-0/+1
Adding the necessary MODULE_DEVICE_TABLE() information allows the driver to be automatically loaded by udev. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-26Merge branch 'master' into for-nextJiri Kosina13-75/+494
Fast-forwarded to current state of Linus' tree as there are patches to be applied for files that didn't exist on the old branch.
2011-04-14leds/leds-regulator.c: fix handling of already enabled regulatorsAntonio Ospite1-0/+4
Make the driver aware of the initial status of the regulator. The leds-regulator driver was ignoring the initial status of the regulator; this resulted in rdev->use_count being incremented to 2 after calling regulator_led_set_value() in the .probe method when a regulator was already enabled at insmod time, which made it impossible to ever disable the regulator. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Antonio Ospite <ospite@studenti.unina.it> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-10treewide: remove extra semicolonsJustin P. Mattock1-1/+1
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-03-31Fix common misspellingsLucas De Marchi2-3/+3
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-25Merge git://git.infradead.org/battery-2.6Linus Torvalds1-0/+20
* git://git.infradead.org/battery-2.6: (30 commits) bq20z75: Fix time and temp units bq20z75: Fix issues with present and suspend z2_battery: Fix count of properties s3c_adc_battery: Fix method names when PM not set z2_battery: Add MODULE_DEVICE_TABLE ds2782_battery: Add MODULE_DEVICE_TABLE bq20z75: Add MODULE_DEVICE_TABLE power_supply: Update power_supply_is_watt_property bq20z75: Add i2c retry mechanism bq20z75: Add optional battery detect gpio twl4030_charger: Make the driver atomic notifier safe bq27x00: Use single i2c_transfer call for property read bq27x00: Cleanup bq27x00_i2c_read bq27x00: Minor cleanups bq27x00: Give more specific reports on battery status bq27x00: Add MODULE_DEVICE_TABLE bq27x00: Add new properties bq27x00: Poll battery state bq27x00: Cache battery registers bq27x00: Add bq27000 support ...
2011-03-23mfd: Adopt mfd_data in 88pm860x ledHaojian Zhuang1-32/+28
Copy 88pm860x platform data into different mfd_data structure for led driver. So move the identification of device node from led driver to mfd driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: mfd_cell is now implicitly available to mc13xxx driversAndres Salomon1-3/+4
The cell's platform_data is now accessed with a helper function; change clients to use that, and remove the now-unused data_size. Note that mfd-core no longer makes a copy of platform_data, but the mc13xxx-core driver creates the pdata structures on the stack. In order to get around that, the various ARM mach types that set the pdata have been changed to hold the variable in static (global) memory. Also note that __initdata references in aforementioned pdata structs have been dropped. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-22drivers/leds/leds-lp5523.c: world-writable engine* sysfs filesVasiliy Kulikov1-10/+10
Don't allow everybody to change LED settings. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22drivers/leds/leds-lp5521.c: world-writable sysfs engine* filesVasiliy Kulikov1-7/+7
Don't allow everybody to change LED settings. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22leds: make *struct gpio_led_platform_data.leds constUwe Kleine-König1-1/+1
And fix a typo. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22leds: add driver for LM3530 ALSShreshtha Kumar Sahu3-0/+389
Simple backlight driver for National Semiconductor LM3530. Presently only manual mode is supported, PWM and ALS support to be added. Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22leds: convert bd2802 driver to dev_pm_opsMark Brown1-19/+28
There is a move to deprecate bus-specific PM operations and move to using dev_pm_ops instead in order to reduce the amount of boilerplate code in buses and facilitiate updates to the PM core. Do this move for the bs2802 driver. [akpm@linux-foundation.org: fix warnings] Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Kim Kyuwon <q1.kim@samsung.com> Cc: Kim Kyuwon <chammoru@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-28leds/leds-gpio: merge platform_driver with of_platform_driverGrant Likely1-127/+87
Both interfaces can be driven with the same driver, and of_platform_driver is getting removed. This patch merges the two driver registrations. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-01-31leds: Add ability to blink via simple triggerVasily Khoruzhick1-0/+20
As blink API is now available, it's possible to add ability to blink via simple trigger. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2011-01-26leds: leds-pwm: return proper error if pwm_request failedAxel Lin1-0/+1
Return PTR_ERR(led_dat->pwm) instead of 0 if pwm_request failed Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Luotao Fu <l.fu@pengutronix.de> Cc: Reviewed-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20drivers/leds/ledtrig-gpio.c: make output match input, tighten input checkingJanusz Krzysztofik1-7/+8
Replicate changes made to drivers/leds/ledtrig-backlight.c. Cc: Paul Mundt <lethal@linux-sh.org> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13leds: add output inversion option to backlight triggerJanusz Krzysztofik1-4/+57
Extend the LED backlight tirgger driver with an option that allows for inverting the trigger output polarity. With the invertion option provided, I (ab)use the backlight trigger for driving a LED that indicates LCD display blank condtition on my Amstrad Delta videophone. Since the machine has no dedicated power LED, it was not possible to distinguish if the display was blanked, or the machine was turned off, without touching it. The invert sysfs control is patterned after a similiar function of the GPIO trigger driver. [akpm@linux-foundation.org: make output match input, tighten input checking] [akpm@linux-foundation.org: make output match input, tighten input checking] Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Cc: Paul Mundt <lethal@linux-sh.org> Acked-by: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13leds-lp5521: modify the way of setting led device nameArun Murthy1-1/+2
Currently the led device name is fetched from the device_type in I2C_BOARD_INFO which comes from the platform data. This name is in turn used to create an entry in sysfs. If there exists two or more lp5521 on a particular platform, the device_type in I2C_BOARD_INFO has to be the same, else lp5521 driver probe wont be called and if used so, results in run time warning "cannot create sysfs with same name" and hence a failure. The name that is used to create sysfs entry is to be passed by the struct led_platform_data. Hence adding an element of type const char * and change in lp5521 driver to use this name in creating the led device if present else use the name obtained by I2C_BOARD_INFO. Signed-off-by: Arun Murthy <arun.murthy@stericsson.com> Acked-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Ilkka Koskinen <ilkka.koskinen@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13leds: lp5521: fix circular lockingSamu Onkalo1-44/+8
Driver contained possibility for circular locking. One lock is held by sysfs-core and another one by the driver itself. This happened when the driver created or removed sysfs entries dynamically. There is no real need to do those operations. Now all the sysfs entries are created at probe and removed at removal. Engine load sysfs entries are now visible all the time. However, access to the entries fails if the engine is disabled or running. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Arun Murthy <arun.murthy@stericsson.com> Reviewed-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13leds: lp5523: fix circular lockingSamu Onkalo1-40/+16
Driver contained possibility for circular locking. One lock is held by sysfs-core and another one by the driver itself. This happened when the driver created or removed sysfs entries dynamically. There is no real need to do those operations. Now all the sysfs entries are created at probe and removed at removal. Engine load and mux configuration sysfs entries are now visible all the time. However, access to the entries fails if the engine is disabled or running. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Arun Murthy <arun.murthy@stericsson.com> Reviewed-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13leds: leds-lp5523: modify the way of setting led device nameSamu Onkalo1-1/+2
Currently all leds channels begins with string lp5523. Patch adds a possibility to provide name via platform data. This makes it possible to have several chips without overlapping sysfs names. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Arun Murthy <arun.murthy@stericsson.com> Cc: Ilkka Koskinen <ilkka.koskinen@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13leds: leds-pca9532 cleanupsAxel Lin1-38/+28
- Remove unneeded input_free_device() after input_unregister_device(). - Add pca9532_destroy_devices() function for destroy devices. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13drivers/leds/leds-lp5521.c: fix potential buffer overflowVasiliy Kulikov1-0/+2
The code doesn't check first sscanf() return value. If first sscanf() failed then c contains some garbage. It might lead to reading uninitialised stack data in the second sscanf() call. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-07Merge branch 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds1-1/+1
* 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (33 commits) usb: don't use flush_scheduled_work() speedtch: don't abuse struct delayed_work media/video: don't use flush_scheduled_work() media/video: explicitly flush request_module work ioc4: use static work_struct for ioc4_load_modules() init: don't call flush_scheduled_work() from do_initcalls() s390: don't use flush_scheduled_work() rtc: don't use flush_scheduled_work() mmc: update workqueue usages mfd: update workqueue usages dvb: don't use flush_scheduled_work() leds-wm8350: don't use flush_scheduled_work() mISDN: don't use flush_scheduled_work() macintosh/ams: don't use flush_scheduled_work() vmwgfx: don't use flush_scheduled_work() tpm: don't use flush_scheduled_work() sonypi: don't use flush_scheduled_work() hvsi: don't use flush_scheduled_work() xen: don't use flush_scheduled_work() gdrom: don't use flush_scheduled_work() ... Fixed up trivial conflict in drivers/media/video/bt8xx/bttv-input.c as per Tejun.
2010-12-24leds-wm8350: don't use flush_scheduled_work()Tejun Heo1-1/+1
flush_scheduled_work() is deprecated and scheduled to be removed. Directly flush led->work on removal instead. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Richard Purdie <rpurdie@rpsys.net>
2010-12-22led_class: fix typo in blink APIJohannes Berg1-1/+1
When I added led_blink_set I had a typo: the return value of the hw offload is a regular error code that is zero when succesful, and in that case software emulation should not be used, rather than the other way around. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Cc: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-02leds: fix up dependenciesJohannes Berg1-9/+41
It's not useful to build LED triggers when there's no LEDs that can be triggered by them. Therefore, fix up the dependencies so that this cannot happen, and fix a few users that select triggers to depend on LEDS_CLASS as well (there is also one user that also selects LEDS_CLASS, which is OK). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Tested-by: Ingo Molnar <mingo@elte.hu> Cc: Arnd Hannemann <arnd@arndnet.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-25drivers/leds/leds-lp5523.c: perform SW reset before detectionSamu Onkalo1-7/+5
Chip detection may fail if the chip is in some odd state for example after system restart. Chip doesn't have HW reset line. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-25drivers/leds/leds-lp5521.c: perform SW reset before detectionSamu Onkalo1-7/+5
Chip detection may fail if the chip is in some odd state for example after system restart. Chip doesn't have HW reset line. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-25drivers/leds/leds-lp5523.c: adjust delays and add comments to themSamu Onkalo1-14/+17
Delays were little bit too long. Adjust delay times and add some comments to them. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-25drivers/leds/leds-lp5521.c: adjust delays and add comments to themSamu Onkalo1-9/+16
Delays were little bit too long. Adjust delay times and add some comments to them. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-25drivers/leds/leds-lp5523.c: change some macros to functionsSamu Onkalo1-3/+6
A small macro changed to inline function to have proper type checking. Inline added to two similar small functions. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-25drivers/leds/leds-lp5521.c: change some macros to functionsSamu Onkalo1-5/+16
Some small macros changed to inline functions to have proper type checking. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-25leds: fix bug with reading NAS SS4200 dmi codeSteven Rostedt1-0/+1
While running randconfg with ktest.pl I stumbled upon this bug: BUG: unable to handle kernel NULL pointer dereference at 0000000000000003 IP: [<ffffffff815fe44f>] strstr+0x39/0x86 PGD 0 Oops: 0000 [#1] SMP last sysfs file: CPU 0 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.37-rc1-test+ #6 DG965MQ/ RIP: 0010:[<ffffffff815fe44f>] [<ffffffff815fe44f>] strstr+0x39/0x86 RSP: 0018:ffff8800797cbd80 EFLAGS: 00010213 RAX: 0000000000000000 RBX: 0000000000000003 RCX: ffffffffffffffff RDX: 0000000000000000 RSI: ffffffff82eb7ac9 RDI: 0000000000000003 RBP: ffff8800797cbda0 R08: ffff880000000003 R09: 0000000000030725 R10: ffff88007d294c00 R11: 0000000000014c00 R12: 0000000000000020 R13: ffffffff82eb7ac9 R14: ffffffffffffffff R15: ffffffff82eb7b08 FS: 0000000000000000(0000) GS:ffff88007d200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000003 CR3: 0000000002a1d000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff8800797ca000, task ffff8800797d0000) Stack: 00000000000000ba ffffffff82eb7ac9 ffffffff82eb7ab8 00000000000000ba ffff8800797cbdf0 ffffffff81e2050f ffff8800797cbdc0 00000000815f913b ffff8800797cbe00 ffffffff82eb7ab8 0000000000000000 0000000000000000 Call Trace: [<ffffffff81e2050f>] dmi_matches+0x117/0x154 [<ffffffff81e205d7>] dmi_check_system+0x3d/0x8d [<ffffffff82e1ad25>] ? nas_gpio_init+0x0/0x2c8 [<ffffffff82e1ad49>] nas_gpio_init+0x24/0x2c8 [<ffffffff820d750d>] ? wm8350_led_init+0x0/0x20 [<ffffffff82e1ad25>] ? nas_gpio_init+0x0/0x2c8 [<ffffffff810022f7>] do_one_initcall+0xab/0x1b2 [<ffffffff82da749c>] kernel_init+0x248/0x331 [<ffffffff8100e624>] kernel_thread_helper+0x4/0x10 [<ffffffff82da7254>] ? kernel_init+0x0/0x331 Found that the nas_led_whitelist dmi_system_id structure array had no NULL end delimiter, causing the dmi_check_system() loop to read an undefined entry. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Dave Hansen <dave@sr71.net> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12drivers/leds/leds-gpio.c: properly initialize return valueDavidlohr Bueso1-1/+1
In the event that none of the configs are set (CONFIG_LEDS_GPIO_PLATFORM, CONFIG_LEDS_GPIO_OF, CONFIG_LEDS_GPIO_PLATFORM), we will return a bogus value when initializing the module. Signed-off-by: Davidlohr Bueso <dave@gnu.org> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12leds: update LP552x support Kconfig and MakefileSamu Onkalo2-0/+20
Provide configuration and compilation support for LP5521 and LP5523 Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12leds: driver for National Semiconductors LP5523 chipSamu Onkalo1-0/+1065
LP5523 chip is nine channel led driver with programmable engines. Driver provides support for that chip for direct access via led class or via programmable engines. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12leds: driver for National Semiconductor LP5521 chipSamu Onkalo1-0/+821
This patchset provides support for LP5521 and LP5523 LED driver chips from National Semicondutor. Both drivers supports programmable engines and naturally LED class features. Documentation is provided as a part of the patchset. I created "leds" subdirectory under Documentation. Perhaps the rest of the leds* documentation should be moved there. Datasheets are freely available at National Semiconductor www pages. This patch: LP5521 chip is three channel led driver with programmable engines. Driver provides support for that chip for direct access via led class or via programmable engines. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12led-class: always implement blinkingJohannes Berg4-117/+116
Currently, blinking LEDs can be awkward because it is not guaranteed that all LEDs implement blinking. The trigger that wants it to blink then needs to implement its own timer solution. Rather than require that, add led_blink_set() API that triggers can use. This function will attempt to use hw blinking, but if that fails implements a timer for it. To stop blinking again, brightness_set() also needs to be wrapped into API that will stop the software blink. As a result of this, the timer trigger becomes a very trivial one, and hopefully we can finally see triggers using blinking as well because it's always easy to use. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 21:41:06 +0000