summaryrefslogtreecommitdiff
path: root/drivers/char/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2010-05-27char drivers: RAM oops/panic loggerMarco Stornelli1-0/+7
Ramoops, like mtdoops, can log oops/panic information but in RAM. It can be used with persistent RAM for systems without flash support. In addition, for this systems, with this driver, it's no more needed add to the kernel the mtd subsystem with advantage in footprint. It can be used in a very easy way with persistent RAM for systems without flash support. For these systems, with this driver, it is no longer required to cinlude mtd subsystem with an advantage in footprint. In addition, you can save flash space and store this information only in RAM. Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com> Cc: Simon Kagstrom <simon.kagstrom@netinsight.net> Cc: David Woodhouse <David.Woodhouse@intel.com> Cc; Anders Grafstrom <anders.grafstrom@netinsight.net> Cc: Yuasa Yoichi <yuasa@linux-mips.org> Cc: Jamie Lokier <jamie@shareable.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-21tty: n_gsm: depends on NETRandy Dunlap1-0/+1
n_gsm uses skb functions, so it should depend on NET. n_gsm.c:(.text+0x123d49): undefined reference to `skb_dequeue' n_gsm.c:(.text+0x123d98): undefined reference to `kfree_skb' n_gsm.c:(.text+0x123e1e): undefined reference to `skb_pull' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21tty: n_gsm line disciplineAlan Cox1-1/+8
Add an implementation of GSM 0710 MUX. The implementation currently supports - Basic and advanced framing (as either end of the link) - UI or UIH data frames - Adaption layer 1-4 (1 and 2 via tty, 3 and 4 as skbuff lists) - Modem and control messages including the correct retry process - Flow control and exposes the MUX channels as a set of virtual tty devices including modem signals. This is an experimental driver. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-24virtio: console: Associate each port with a char deviceAmit Shah1-0/+8
The char device will be used as an interface by applications on the guest to communicate with apps on the host. The devices created are placed in /dev/vportNpn where N is the virtio-console device number and n is the port number for that device. One dynamic major device number is allocated for each device and minor numbers are allocated for the ports contained within that device. The file operation for the char devs will be added in the following commits. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-01-15powerpc/hvc: Driver build breaks with !HVC_CONSOLEKamalesh Babulal1-1/+1
Hi Stephen, next-20090925 randconfig build breaks on hvcs driver on powerpc, with HVC_CONSOLE=n. ERROR: ".hvc_put_chars" [drivers/char/hvcs.ko] undefined! ERROR: ".hvc_get_chars" [drivers/char/hvcs.ko] undefined! adding the dependency of HVC_CONSOLE helped Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-15bfin-otp: add BF51x to the supported arch listMike Frysinger1-1/+1
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-11tty: esp: remove broken driverAlan Cox1-13/+0
The ESP driver has been marked broken for years. It's an old ISA device that clearly nobody cares about any more. Remove it Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-10-30tty: Mark generic_serial users as BROKENAlan Cox1-3/+3
There isn't much else I can do with these. I can find no hardware for any of them and no users. The code is broken. Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-24drivers/char/uv_mmtimer.c: add memory mapped RTC driver for UVDimitri Sivanich1-0/+8
This driver memory maps the UV Hub RTC. Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-03MIPS: Update VR41xx GPIO driver to use gpiolibYoichi Yuasa1-4/+0
Signed-off-by: Yoichi Yuasa <yyuasa@linux.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-06-18drivers/char/rtc: disable legacy RTC driver on Blackfin systemsMike Frysinger1-1/+1
Blackfin platforms do not support the hardware which this driver drives. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Paul Mundt <lethal@linux-sh.org> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-14Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (31 commits) trivial: remove the trivial patch monkey's name from SubmittingPatches trivial: Fix a typo in comment of addrconf_dad_start() trivial: usb: fix missing space typo in doc trivial: pci hotplug: adding __init/__exit macros to sgi_hotplug trivial: Remove the hyphen from git commands trivial: fix ETIMEOUT -> ETIMEDOUT typos trivial: Kconfig: .ko is normally not included in module names trivial: SubmittingPatches: fix typo trivial: Documentation/dell_rbu.txt: fix typos trivial: Fix Pavel's address in MAINTAINERS trivial: ftrace:fix description of trace directory trivial: unnecessary (void*) cast removal in sound/oss/msnd.c trivial: input/misc: Fix typo in Kconfig trivial: fix grammo in bus_for_each_dev() kerneldoc trivial: rbtree.txt: fix rb_entry() parameters in sample code trivial: spelling fix in ppc code comments trivial: fix typo in bio_alloc kernel doc trivial: Documentation/rbtree.txt: cleanup kerneldoc of rbtree.txt trivial: Miscellaneous documentation typo fixes trivial: fix typo milisecond/millisecond for documentation and source comments. ...
2009-06-12Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds1-1/+1
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (55 commits) microblaze: Don't use access_ok for unaligned microblaze: remove unused flat_stack_align() definition microblaze: Fix problem with early_printk in startup microblaze_mmu_v2: Makefiles microblaze_mmu_v2: Kconfig update microblaze_mmu_v2: stat.h MMU update microblaze_mmu_v2: Elf update microblaze_mmu_v2: Update dma.h for MMU microblaze_mmu_v2: Update cacheflush.h microblaze_mmu_v2: Update signal returning address microblaze_mmu_v2: Traps MMU update microblaze_mmu_v2: Enable fork syscall for MMU and add fork as vfork for noMMU microblaze_mmu_v2: Update linker script for MMU microblaze_mmu_v2: Add MMU related exceptions handling microblaze_mmu_v2: uaccess MMU update microblaze_mmu_v2: Update exception handling - MMU exception microblaze_mmu_v2: entry.S, entry.h microblaze_mmu_v2: Add CURRENT_TASK for entry.S microblaze_mmu_v2: MMU asm offset update microblaze_mmu_v2: Update tlb.h and tlbflush.h ...
2009-06-12trivial: Kconfig: .ko is normally not included in module namesPavel Machek1-1/+1
.ko is normally not included in Kconfig help, make it consistent. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-11tty: bfin_jtag_comm: emulate a TTY over the Blackfin EMUDAT/JTAG interfaceMike Frysinger1-0/+13
The Blackfin JTAG interface has a 4 byte generic data field (EMUDAT). With a little creative thinking, we can turn this into a TTY device. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-21microblaze: Kconfig: Enable drivers for MicroblazeMichal Simek1-1/+1
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-01-31NVRAM depends on RTC_DRV_CMOSUwe Kleine-König1-1/+1
drivers/char/nvram.c uses rtc_lock, that (on ARM) is only defined if RTC_DRV_CMOS is enabled. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2009-01-08powerpc: Fix iseries drivers build failure without CONFIG_VIOPATHKamalesh Babulal1-0/+1
iSeries dependent drivers fail to build, when CONFIG_VIOPATH is disabled. Fix the problem by making those drivers select it. Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-06genrtc: disable genrtc on Blackfin systemsMike Frysinger1-1/+1
Blackfin platforms do not support the hardware which this driver drives. Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02tty: ESP has been broken for locking etc forverAlan Cox1-1/+1
Mark it broken Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-02Add DEVPTS_MULTIPLE_INSTANCES config tokenSukadev Bhattiprolu1-0/+11
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-28Merge branch 'next' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (144 commits) powerpc/44x: Support 16K/64K base page sizes on 44x powerpc: Force memory size to be a multiple of PAGE_SIZE powerpc/32: Wire up the trampoline code for kdump powerpc/32: Add the ability for a classic ppc kernel to be loaded at 32M powerpc/32: Allow __ioremap on RAM addresses for kdump kernel powerpc/32: Setup OF properties for kdump powerpc/32/kdump: Implement crash_setup_regs() using ppc_save_regs() powerpc: Prepare xmon_save_regs for use with kdump powerpc: Remove default kexec/crash_kernel ops assignments powerpc: Make default kexec/crash_kernel ops implicit powerpc: Setup OF properties for ppc32 kexec powerpc/pseries: Fix cpu hotplug powerpc: Fix KVM build on ppc440 powerpc/cell: add QPACE as a separate Cell platform powerpc/cell: fix build breakage with CONFIG_SPUFS disabled powerpc/mpc5200: fix error paths in PSC UART probe function powerpc/mpc5200: add rts/cts handling in PSC UART driver powerpc/mpc5200: Make PSC UART driver update serial errors counters powerpc/mpc5200: Remove obsolete code from mpc5200 MDIO driver powerpc/mpc5200: Add MDMA/UDMA support to MPC5200 ATA driver ... Fix trivial conflict in drivers/char/Makefile as per Paul's directions
2008-12-25[S390] s390/hvc_console: z/VM IUCV hypervisor console supportHendrik Brueckner1-0/+10
This patch introduces a new hypervisor console (HVC) back-end that provides terminal access over the z/VM inter-user communication vehicle (IUCV). The z/VM IUCV communication is independent of the regular tcp/ip network and allows access even if there is no network connection between two z/VM guest virtual machines. The z/VM IUCV hypervisor console back-end helps the user to access a z/VM guest virtual machine that lacks of network connectivity; and thus, provides a "full-screen" terminal alternative to 3215/3270 terminal sessions. Use the hvc_iucv=[0..8] kernel boot parameter to specify the number of HVC terminals using a z/VM IUCV back-end. A recent version of the s390-tools package is required to establish a terminal connection to a z/VM IUCV hypervisor console back-end. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-11-19Merge branch 'linux-2.6' into nextPaul Mackerras1-12/+12
2008-11-19powerpc: udbg-based backend for hvc_consoleDavid Gibson1-0/+6
This adds a new backend for the hvc console based on the low-level udbg callbacks. This effectively implements a working runtime console in terms of the simple udbg primitives. This is kind of a hack - since udbg isn't something you really want to be using routinely - but it's really useful during bringup. This can be used to quickly implement a userspace-usable console while you're working on a proper driver for whatever console I/O device the hardware has. Or, it can be used to avoid writing a full blown tty/console driver entirely for quick-and-dirty I/O hardware that will later be replaced by something else. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-14Create/use more directory structure in the Documentation/ tree.Randy Dunlap1-12/+12
Create Documentation/blockdev/ sub-directory and populate it. Populate the Documentation/serial/ sub-directory. Move MSI-HOWTO.txt to Documentation/PCI/. Move ioctl-number.txt to Documentation/ioctl/. Update all relevant 00-INDEX files. Update all relevant Kconfig files and source files. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
2008-10-30CHAR: Delete old and now unused M48T35 RTC driver for SGI IP27.Ralf Baechle1-11/+0
It was only used by this one SGI platform which recently was converted to RTC_LIB and with RTC_LIB enabled the legacy drivers are no more selectable. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30CHAR: Delete old and now unused DS1286 driver.Ralf Baechle1-11/+0
It was only used by two SGI platforms which recently were converted to RTC_LIB and with RTC_LIB enabled the legacy drivers are no more selectable. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
2008-10-16legacy rtc: remove needless/confusing HPET_RTC_IRQ optionDavid Brownell1-9/+0
HPET_RTC_IRQ is no longer needed; HPET_EMULATE_RTC suffices and is more correct. (http://bugzilla.kernel.org/show_bug.cgi?id=11111) Note that when using the legacy RTC driver, platforms don't really do a dynamic switch between HPET and non-HPET modes based on whether HPET hardware actually exists ... only rtc-cmos (using the new RTC framework) currently switches that way. So this reflects bitrot in that legacy code, for x86/ia64: kernels with HPET support configured (e.g. for a clocksource) can't get IRQs from the legacy RTC driver unless they really have HPET hardware. (The obvious workaround is to not use the legacy RTC driver on those platforms when you configure HPET ... unless you know the target really has a HPET.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13stallion: Use krefsAlan Cox1-2/+2
Use tty_port_init and krefs in the stallion drivers to protect us from devices going away underneath us. As with the other drives some rearranging is done to pass the tty structure down properly on the user side. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-07powerpc/iseries: remove the old viocons driverStephen Rothwell1-1/+1
This driver was declared obsolete over 2 years ago, the alternative console driver for legacy iSeries (hvc_iseries) was made the default over 1 year ago and this driver has been build broken for over 3 months, so remove it. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25Merge git://git.infradead.org/embedded-2.6Linus Torvalds1-0/+8
* git://git.infradead.org/embedded-2.6: Make console charset translation optional
2008-07-25virtio: console as a config optionChristian Borntraeger1-1/+5
I also added a small Kconfig change that allows the user to specify the virtio console in menuconfig. (Fixes to export symbols from Stephen Rothwell <sfr@canb.auug.org.au>) (Fixes for CONFIG_VIRTIO_CONSOLE=y vs CONFIG_VIRTIO=m from Christian himself) Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2008-07-25hvc_console: rework setup to replace irq functions with callbacksChristian Borntraeger1-0/+5
This patch tries to change hvc_console to not use request_irq/free_irq if the backend does not use irqs. This allows virtio_console to use hvc_console without having a linker reference to request_irq/free_irq. In addition, together with patch 2/3 it improves the performance for virtio console input. (an earlier version of this patch was tested by Yajin on lguest) The irq specific code is moved to hvc_irq.c and selected by the drivers that use irqs (System p, System i, XEN). I replaced "int irq" with the opaque "int data". The request_irq and free_irq calls are replaced with notifier_add and notifier_del. I have also changed the code a bit to call the notifier_add and notifier_del inside the spinlock area as the callbacks are found via hp->ops. Changes since last version: o remove ifdef o reintroduce "irq_requested" as "notified" o cleanups, sparse.. I did not move the timer based polling into a separate polling scheme. I played with several variants, but it seems we need to sleep/schedule in a thread even for irq based consoles, as there are throttleing and buffer size constraints. I also kept hvc_struct defined in hvc_console.h so that hvc_irq.c can access the irq_requested element. Feedback is appreciated. virtio_console is currently the only available console for kvm on s390. I plan to push this change as soon as all affected parties agree on it. I would love to get test results from System p, Xen etc. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-07-24drivers/char: remove old broken Cobalt LCD driverYoichi Yuasa1-7/+0
Remove old broken Cobalt LCD driver. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22specialix: restore driver using new break functionalityAlan Cox1-1/+1
Use the hardware break support on the specialix driver Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22riscom8: Restore driver using new break functionalityAlan Cox1-1/+1
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22isicom: restore using hardware break supportAlan Cox1-1/+1
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22epca: Restore driverAlan Cox1-1/+1
Convert the driver to use the added hardware break support Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22tty: rework break handlingAlan Cox1-1/+1
Some hardware needs to do break handling itself and may have partial support only. Make break_ctl return an error code. Add a tty driver flag so you can indicate driver hardware side break support. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22tty: Mark unconverted drivers as BROKENAlan Cox1-3/+3
Nobody seems to use these drivers anyway so if they want them they can fix them up. I don't have the needed info to add break_ctl support to them. Send patches if you don't like it. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22specialix: Code cleanupsAlan Cox1-10/+0
Go through the inlines and other oddments that are iffy. Remove various bits of dead code and bogus debug. Turn the crtsdts compile time option into a runtime switch. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-15powerpc: Add driver for Barrier Synchronization RegisterSonny Rao1-0/+8
Adds a character driver for BSR support on IBM POWER systems including Power5 and Power6. The BSR is an optional processor facility not currently implemented by any other processors. It's primary purpose is fast large SMP synchronization. More details on the BSR are in comments to the code which follows. This patch adds BSR driver to pseries_defconfig. Signed-off-by: Sonny Rao <sonnyrao@linux.vnet.ibm.com> Signed-off-by: Joel Schopp <jschopp@austin.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-06-12rtc: make HPET_RTC_IRQ track HPET_EMULATE_RTCDavid Brownell1-4/+4
More Kconfig tweaks related to the legacy PC RTC code: - Describe the legacy PC RTC driver as such ... it's never quite been clear that this driver is for PC RTCs, and now it's fair to call this the "legacy" driver. - Force it to understand about HPET stealing its IRQs ... kernel code does this always when HPET is in use, there should be no option for users to goof up the config. This seems to fix kernel bugzilla #10729. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-06drivers/char/ip2: fix Kconfig after ip2/ip2main mergeRoland.Kletzing1-2/+2
As commit 6089093e588ee3f6aed99d08b1cf5ea37c52cf97 ("ip2: fix crashes on load/unload") fixed the ip2 crashes on load/unload by making ip2/ip2main one module (ip2), Kconfig shouldn't mention a now non-existing module. Signed-off-by: Roland.Kletzing <devzero@web.de> Acked-by: Alan Cox <alan@redhat.com> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-06-04Make console charset translation optionalDavid Woodhouse1-0/+8
By turning off the new CONSOLE_TRANSLATIONS option and dropping the associated code and tables from the kernel, we can save about 7KiB. Taken from linux-tiny project by Tim Bird and mangled further by dwmw2. Signed-off-by: Tim Bird <tim.bird@am.sony.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-05-14char: select fw_loader by moxaJiri Slaby1-0/+1
Select FW_LOADER since moxa needs it, otherwise we face link problems such as: drivers/built-in.o: In function moxa_pci_probe':moxa.c:(.devinit.text+0x76d8): undefined reference to request_firmware' :moxa.c:(.devinit.text+0x7e6e): undefined reference to release_firmware' make: *** [.tmp_vmlinux1] Error 1 Reported-by: Philippe Roussel <p.o.roussel@free.fr> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29make /dev/kmem a config optionArjan van de Ven1-0/+9
Make /dev/kmem a config option; /dev/kmem is VERY rarely used, and when used, it's generally for no good (rootkits tend to be the most common users). With this config option, users have the choice to disable /dev/kmem, saving some size as well. A patch to disable /dev/kmem has been in the Fedora and RHEL kernels for 4+ years now without any known problems or legit users of /dev/kmem. [akpm@linux-foundation.org: make CONFIG_DEVKMEM default to y] Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28rtc: avoid legacy drivers with generic frameworkDavid Brownell1-1/+10
Kconfig tweaks to help reduce RTC configuration bugs, by avoiding legacy RTC drivers when the generic RTC framework is enabled: - If rtc-cmos is selected, disable the legacy rtc driver; - When using generic RTC on x86, enable rtc-cmos by default; - In the old "chardev RTC" section of Kconfig, add a comment warning people off these (seven) legacy RTC drivers when the generic framework is in use. People can still use the legacy drivers if they want (or need) to. This doesn't fix the broken dependencies for the legacy "CMOS" RTC driver. Ideally it would be a full list of platforms where it works, not a partial list of ones where it won't. Or better yet, it would depend on a "HAVE_CMOS_RTC" flag defined by various platforms ... surely there's a Kconfig style guideline lurking there. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-25Blackfin char driver for Blackfin on-chip OTP memory (v3)Mike Frysinger1-0/+28
initial char driver for otp memory (only read supported atm ... needs real examples/docs for write support) v2-v3: - fixup __initdata with __initconst, as we are heading for 2.6.26 Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Acked-by: Jiri Slaby <jirislaby@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 23:23:21 +0000