summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2007-12-24[Blackfin] arch: disable bfin_get_ether_addr fucntion for boards when do not ↵Martin Strubel1-0/+2
use MAC driver Signed-off-by: Martin Strubel <hackfin@section5.ch> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-24[Blackfin] arch: Enable both edge triggered GPIO IRQs on BF54x and use ↵Michael Hennerich1-21/+46
irq_to_gpio() Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-27[Blackfin] arch: added Minotaur BSPMartin Strubel3-0/+324
Signed-off-by: Martin Strubel <hackfin@section5.ch> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-27[Blackfin] arch: replace current blackfin specific pfbutton driver with ↵Michael Hennerich5-0/+140
kernel generic gpio key driver Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-24[Blackfin] arch: append IRQ Number to label stringMichael Hennerich2-8/+19
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-24[Blackfin] arch: Fix gpio label handlingMichael Hennerich1-13/+18
early serial init also utilizes the peripheral request api - however at this point bfin_gpio_init didn't allocate memory for the labels. So we always have two zombies (allocated pin functions without labels) This happens before the initcalls - We now allocate memory statically. Define MAX_RESOURCES individually for each cpu. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-24[Blackfin] arch: add support for BF523/BF524/BF526Mike Frysinger3-3/+63
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-24[Blackfin] arch: scrub dead alive/idle LED codeMike Frysinger4-172/+0
if it does get re-added, it needs to be in the boards directory, not common code ... or it needs a re-implementation Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-24[Blackfin] arch: set default value of DEB_DMA_URGENT to YES to avoid DMA ↵Cliff Cai1-1/+1
aborting caused by conflict between core and DMA Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-27[Blackfin] arch: Added support for OpenCores Keyboard Controller to H8606 boardJavier Herrero1-0/+32
Signed-off-by: Javier Herrero <jherrero@hvsistemas.es> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-24[Blackfin] arch: Fix if/def BUG - and define is multipoint NOBryan Wu1-4/+4
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-24[Blackfin] arch: The BF527 EZkit connects UART1/PORTFMichael Hennerich1-1/+1
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-24[Blackfin] arch: update defconfig of boardsBryan Wu6-111/+134
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-24[Blackfin] arch: Trash bf54x-hcd driver - we use the musb driverMichael Hennerich1-21/+0
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-24[Blackfin] arch: Enable peripheral platform resources on the BF527 EZkitMichael Hennerich1-0/+98
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-27[Blackfin] arch: Fix bug to Enable bf548 to Re-program Clocks while Kernel ↵Sonic Zhang2-2/+64
boots. Reprogram DDR EBIU register properly for bf548. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-23[Blackfin] arch: Clean up dump_bfin_memRobin Getz3-49/+86
Clean up dump_bfin_mem so that it will display content from the kernel, as well as l1 instruction, when deferred HW errors happen, print out the last frame info if it makes sense. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-27[Blackfin] arch: add Hitachi TX09D70VM1CDA TFT LCD driver resource to ↵Michael Hennerich2-0/+21
Blackfin board Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-23[Blackfin] arch: Fix bug to Enable kernel to build for bf548 with PM.Sonic Zhang5-13/+61
On BF548-EZKIT, build kernel faills with power management, video and audio enabled. This patch fix this. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-21[Blackfin] arch: fix bug - make memcpy return the dest addr.Yi Li1-6/+2
The memcpy() function returns the src pointer instead of the dst pointer. This patch fix this bug. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-21[Blackfin] arch: Added support for 8250-class UARTs in HV Sistemas H8606 ↵Javier Herrero1-2/+49
board, modification in 8250.c driver for correct compilation with Blackfin Signed-off-by: Javier Herrero <jherrero@hvsistemas.es> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-21[Blackfin] arch: Let the pre-processor do the math to save a few cycles - no ↵Robin Getz1-3/+1
functional changes Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-21[Blackfin] arch: do not use fixed numbers to describe offsets - no ↵Robin Getz1-1/+1
functional changes Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-21[Blackfin] arch: do not use hard coded addressesRobin Getz1-4/+4
Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-12-24[Blackfin] arch: fix bug gdb testing on hardware has regressionRobin Getz1-7/+30
http://blackfin.uclinux.org/gf/project/toolchain/tracker/?action=TrackerItemEdit&tracker_item_id=3651 As Bernd predicted, this was only necessary because of other problems in the kenel - fixing those, and this is not necessary, so remove it. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-27[Blackfin] arch: fix bug - trap_tests fails to recover on some tests.Robin Getz4-71/+95
http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3719 When the CPLBs get a miss, we do: - find a victim in the HW table - remove the victim - find the replacement in the software table - put it into the HW table. If we can't find a replacement in the software table, we accidently leave a duplicate in the HW table. This patch ensures that duplicate is marked as not valid. What we should do is find the replacement in the software table, before we find a victim in the HW table - but its too late in the release cycle to do that much restructuring of this code. Rather that duplicate code, connect Hardware Errors (irq5) into trap_c, so user space processes get killed properly. The rest of irq_panic() can be moved into traps.c (later) There is still a small corner case that causes problems when a pheriperal interrupt goes off a single cycle before a user space hardware error. This causes a kernel panic, rather than the user space process being killed. But, this checkin makes things work in 99.9% of the cases, and is a vast improvement from what is there today (which fails 100% of the time). Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-27[Blackfin] arch: Add a note describing what is going on - no functional changesRobin Getz1-2/+13
Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2008-01-26[S390] replace lock_cpu_hotplug with get_online_cpusMartin Schwidefsky1-6/+6
Git commit 86ef5c9a8edd78e6bf92879f32329d89b2d55b5a forgot a few lock_cpu_hotplug/unlock_cpu_hotplug pairs in arch/s390/kernel/smp.c Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] constify function pointer tables.Jan Engelhardt2-2/+2
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] do local_irq_restore while spinning in spin_lock_irqsave.Hisashi Hifumi1-0/+23
In s390's spin_lock_irqsave, interrupts remain disabled while spinning. In other architectures like x86 and powerpc, interrupts are re-enabled while spinning if IRQ is not masked before spin_lock_irqsave is called. The following patch re-enables interrupts through local_irq_restore while spinning for a lock acquisition. This can improve system response. [heiko.carstens@de.ibm.com: removed saving of pc] Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] add smp_call_function_maskCarsten Otte1-0/+27
This patch adds the s390 variant for smp_call_function_mask(). The implementation is pretty straight forward using the wrapper __smp_call_function_map() which already takes a cpumask_t argument. Signed-off-by: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Remove TOPDIR from MakefileWANG Cong1-4/+0
This patch removes TOPDIR from arch/s390/kernel/Makefile. Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] single-step cleanupRoland McGrath2-16/+19
Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Move NOTES and BUG_TABLE.Martin Schwidefsky1-3/+9
Move the NOTES and BUG_TABLE section in the linker script to the read-only sections right after the text section. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] arch/s390/: Spelling fixesJoe Perches1-1/+1
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Use diag308 subcodes 3 and 6 for reboot and dump when possible.Michael Holzheu1-6/+8
This patch fixes a problem with the following scenario: 1. Linux booted from DASD "A" 2. Reboot from DASD "B" using "/sys/firmware/reipl/ccw/device" 3. Reboot DASD "B" Without this patch in step 3 on newer s390 systems under LPAR instead of DASD "B", DASD "A" will be booted. The reason is that in step 2 we use CCW reipl and in step 3 we use DIAG308 (subcode 3) reipl. DIAG308 does not notice the CCW reipl and still thinks that it has to reboot DASD "A". Before applying this fix, ensure to have MCF RJ9967101E or z9 GA3 base driver installed. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] vmemmap: allocate struct pages before 1:1 mappingChristian Borntraeger1-2/+2
We have seen an oops in an OOM situation, where show_mem tried to access the struct page of a dcss segment. The vmemmap code has already created the 1:1 mapping but failed allocating the struct pages. In the OOM case, show_mem now walks the memory. It uses pfn_valid to detect if it may access the struct page. In the case described above, the mapping was established and pfn_valid returned true. As the struct pages were not allocated, the kernel oopsed. We have to ensure that we have created the struct pages, before we add a mapping pointing to the pages. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Initialize sclp_ipl_infoMichael Holzheu1-0/+1
The sclp ipl information has not been initialized. Therefore the ipl loadparm and the "has_dump" flag have not been set correctly. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Allocate and free cpu lowcores and stacks when needed/possible.Heiko Carstens1-34/+72
No need to preallocate the per cpu lowcores and stacks. Savings are 28-32k per offline cpu. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] use LIST_HEAD instead of LIST_HEAD_INITDenis Cheng1-1/+1
single list_head variable initialized with LIST_HEAD_INIT could almost always can be replaced with LIST_HEAD declaration, this shrinks the code and looks better. Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Load disabled wait psw instead of stopping cpu on halt.Michael Holzheu1-2/+6
Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] kernel: Shutdown Actions InterfaceMichael Holzheu3-461/+600
In case of a kernel panic it is currently possible to specify that a dump should be created, the system should be rebooted or stopped. Virtual sysfs files under the directory /sys/firmware/ are used for that configuration. In addition to that, there are kernel parameters 'vmhalt', 'vmpoff' and 'vmpanic', which can be used to specify z/VM commands, which are automatically executed in case of halt, power off or a kernel panic. This patch combines both functionalities and allows to specify the z/VM CP commands also via sysfs attributes. In addition to that, it enhances the existing handling of shutdown triggers (e.g. halt or panic) and associated shutdown actions (e.g. dump or reipl) and makes it more flexible. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] arch/s390: Add missing "space"Joe Perches1-1/+1
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] crypto: move s390 Kconfig options.Jan Glauber1-60/+0
Move s390 crypto Kconfig options to drivers/crypto/Kconfig to have all hardware crypto devices in one place. This also makes messing up the kernel source tree easier for some people. Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Get rid of additional_cpus kernel parameter.Heiko Carstens3-106/+76
It caused only a lot of confusion. From now on cpu hotplug of up to NR_CPUS will work by default. If somebody wants to limit that then the possible_cpus parameter can be used. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Remove owner_pc member from raw_spinlock_t.Heiko Carstens1-8/+4
Used to contain the address of the holder of the lock. But since the spinlock code is not inlined anymore all locks contain the same address anyway. And since in addtition nobody complained about that for ages its obviously unused. So remove it. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Get rid of HOLES_IN_ZONE requirement.Heiko Carstens3-5/+25
Align everything to MAX_ORDER so we can get rid of the extra checks. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Print kernel version in dump_stack() and show_regs().Heiko Carstens2-11/+27
Also print PREEMPT and/or SMP if the kernel was configured that way. Makes s390 look a bit more like other architectures. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Change vmalloc defintionsChristian Borntraeger2-16/+10
Currently the vmalloc area starts at a dynamic address depending on the memory size. There was also an 8MB security hole after the physical memory to catch out-of-bounds accesses. We can simplify the code by putting the vmalloc area explicitely at the top of the kernel mapping and setting the vmalloc size to a fixed value of 128MB/128GB for 31bit/64bit systems. Part of the vmalloc area will be used for the vmem_map. This leaves an area of 96MB/1GB for normal vmalloc allocations. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Fix tlb flushing with idte.Martin Schwidefsky1-1/+1
The clear-by-asce operation of the idte instruction gets an asce (address-space-control-element) as argument to specify which TLBs need to get flushed. The current code passes a plain pointer to the start of the pgd without the additional bits which would make the pointer an asce. The current machines don't mind the difference but a future model might want to use the designation type control bits in the asce as a filter for the TLBs to flush. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 03:22:55 +0000