summaryrefslogtreecommitdiff
path: root/arch/powerpc/include/asm/reg_booke.h
AgeCommit message (Collapse)AuthorFilesLines
2016-03-01powerpc: Fix misspellings in comments.Adam Buchbinder1-1/+1
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-15powerpc/e6500: add TMCFG0 register definitionTudor Laurentiu1-0/+6
The register is not currently used in the base kernel but will be in a forthcoming kvm patch. Signed-off-by: Laurentiu Tudor <Laurentiu.Tudor@freescale.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2014-09-22KVM: PPC: BOOKE: Emulate debug registers and exceptionBharat Bhushan1-0/+2
This patch emulates debug registers and debug exception to support guest using debug resource. This enables running gdb/kgdb etc in guest. On BOOKE architecture we cannot share debug resources between QEMU and guest because: When QEMU is using debug resources then debug exception must be always enabled. To achieve this we set MSR_DE and also set MSRP_DEP so guest cannot change MSR_DE. When emulating debug resource for guest we want guest to control MSR_DE (enable/disable debug interrupt on need). So above mentioned two configuration cannot be supported at the same time. So the result is that we cannot share debug resources between QEMU and Guest on BOOKE architecture. In the current design QEMU gets priority over guest, this means that if QEMU is using debug resources then guest cannot use them and if guest is using debug resource then QEMU can overwrite them. Signed-off-by: Bharat Bhushan <Bharat.Bhushan@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-07-29powerpc/e6500: Add support for hardware threadsAndy Fleming1-0/+27
The general idea is that each core will release all of its threads into the secondary thread startup code, which will eventually wait in the secondary core holding area, for the appropriate bit in the PACA to be set. The kick_cpu function pointer will set that bit in the PACA, and thus "release" the core/thread to boot. We also need to do a few things that U-Boot normally does for CPUs (like enable branch prediction). Signed-off-by: Andy Fleming <afleming@freescale.com> [scottwood@freescale.com: various changes, including only enabling threads if Linux wants to kick them] Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-07-29powerpc/booke: Define MSR bits the same way as reg.hScott Wood1-9/+19
This ensures that all MSR definitions are consistently unsigned long, and that MSR_CM does not become 0xffffffff80000000 (this is usually harmless because MSR is 32-bit on booke and is mainly noticeable when debugging, but still I'd rather avoid it). Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-06-20powerpc/e500mc: Fix wrong value of MCSR_L2MMU_MHITScott Wood1-1/+1
Signed-off-by: Scott Wood <scottwood@freescale.com> Reported-by: Ed Swarthout <ed.swarthout@freescale.com>
2014-05-30KVM: PPC: E500: Add dcbtls emulationAlexander Graf1-0/+1
The dcbtls instruction is able to lock data inside the L1 cache. We don't want to give the guest actual access to hardware cache locks, as that could influence other VMs on the same system. But we can tell the guest that its locking attempt failed. By implementing the instruction we at least don't give the guest a program exception which it definitely does not expect. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-01-07powerpc/fsl: add E6500 PVR and SPRN_PWRMGTCR0 defineWang Dongsheng1-0/+9
E6500 PVR and SPRN_PWRMGTCR0 will be used in subsequent pw20/altivec idle patches. Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-01-07powerpc/booke64: Add LRAT error exception handlerMihai Caraman1-0/+1
LRAT (Logical to Real Address Translation) present in MMU v2 provides hardware translation from a logical page number (LPN) to a real page number (RPN) when tlbwe is executed by a guest or when a page table translation occurs from a guest virtual address. Add LRAT error exception handler to Booke3E 64-bit kernel and the basic KVM handler to avoid build breakage. This is a prerequisite for KVM LRAT support that will follow. Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-10-18powerpc: move debug registers in a structureBharat Bhushan1-4/+4
This way we can use same data type struct with KVM and also help in using other debug related function. Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> Acked-by: Michael Neuling <mikey@neuling.org> [scottwood@freescale.com: removed obvious debug_reg comment] Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-14powerpc: Wrap MSR macros with parenthesesAnton Blanchard1-4/+4
Not having parentheses around a macro is asking for trouble. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-13booke: Added DBCR4 SPR numberBharat Bhushan1-0/+1
Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05KVM: PPC: booke: Add watchdog emulationBharat Bhushan1-0/+7
This patch adds the watchdog emulation in KVM. The watchdog emulation is enabled by KVM_ENABLE_CAP(KVM_CAP_PPC_BOOKE_WATCHDOG) ioctl. The kernel timer are used for watchdog emulation and emulates h/w watchdog state machine. On watchdog timer expiry, it exit to QEMU if TCR.WRC is non ZERO. QEMU can reset/shutdown etc depending upon how it is configured. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> [bharat.bhushan@freescale.com: reworked patch] Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> [agraf: adjust to new request framework] Signed-off-by: Alexander Graf <agraf@suse.de>
2012-05-24Merge branch 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+34
Pull KVM changes from Avi Kivity: "Changes include additional instruction emulation, page-crossing MMIO, faster dirty logging, preventing the watchdog from killing a stopped guest, module autoload, a new MSI ABI, and some minor optimizations and fixes. Outside x86 we have a small s390 and a very large ppc update. Regarding the new (for kvm) rebaseless workflow, some of the patches that were merged before we switch trees had to be rebased, while others are true pulls. In either case the signoffs should be correct now." Fix up trivial conflicts in Documentation/feature-removal-schedule.txt arch/powerpc/kvm/book3s_segment.S and arch/x86/include/asm/kvm_para.h. I suspect the kvm_para.h resolution ends up doing the "do I have cpuid" check effectively twice (it was done differently in two different commits), but better safe than sorry ;) * 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (125 commits) KVM: make asm-generic/kvm_para.h have an ifdef __KERNEL__ block KVM: s390: onereg for timer related registers KVM: s390: epoch difference and TOD programmable field KVM: s390: KVM_GET/SET_ONEREG for s390 KVM: s390: add capability indicating COW support KVM: Fix mmu_reload() clash with nested vmx event injection KVM: MMU: Don't use RCU for lockless shadow walking KVM: VMX: Optimize %ds, %es reload KVM: VMX: Fix %ds/%es clobber KVM: x86 emulator: convert bsf/bsr instructions to emulate_2op_SrcV_nobyte() KVM: VMX: unlike vmcs on fail path KVM: PPC: Emulator: clean up SPR reads and writes KVM: PPC: Emulator: clean up instruction parsing kvm/powerpc: Add new ioctl to retreive server MMU infos kvm/book3s: Make kernel emulated H_PUT_TCE available for "PR" KVM KVM: PPC: bookehv: Fix r8/r13 storing in level exception handler KVM: PPC: Book3S: Enable IRQs during exit handling KVM: PPC: Fix PR KVM on POWER7 bare metal KVM: PPC: Fix stbux emulation KVM: PPC: bookehv: Use lwz/stw instead of PPC_LL/PPC_STL for 32-bit fields ...
2012-04-19powerpc: fix build when CONFIG_BOOKE_WDT is enabledBaruch Siach1-5/+0
Commit ae3a197e (Disintegrate asm/system.h for PowerPC) broke build of assembly files when CONFIG_BOOKE_WDT is enabled as follows: AS arch/powerpc/lib/string.o /home/baruch/git/stable/arch/powerpc/include/asm/reg_booke.h: Assembler messages: /home/baruch/git/stable/arch/powerpc/include/asm/reg_booke.h:19: Error: Unrecognized opcode: `extern' /home/baruch/git/stable/arch/powerpc/include/asm/reg_booke.h:20: Error: Unrecognized opcode: `extern' Since setup_32.c is the only user of the booke_wdt configuration variables, move the declarations there. Cc: David Howells <dhowells@redhat.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-04-08KVM: PPC: booke: category E.HV (GS-mode) supportScott Wood1-0/+34
Chips such as e500mc that implement category E.HV in Power ISA 2.06 provide hardware virtualization features, including a new MSR mode for guest state. The guest OS can perform many operations without trapping into the hypervisor, including transitions to and from guest userspace. Since we can use SRR1[GS] to reliably tell whether an exception came from guest state, instead of messing around with IVPR, we use DO_KVM similarly to book3s. Current issues include: - Machine checks from guest state are not routed to the host handler. - The guest can cause a host oops by executing an emulated instruction in a page that lacks read permission. Existing e500/4xx support has the same problem. Includes work by Ashish Kalra <Ashish.Kalra@freescale.com>, Varun Sethi <Varun.Sethi@freescale.com>, and Liu Yu <yu.liu@freescale.com>. Signed-off-by: Scott Wood <scottwood@freescale.com> [agraf: remove pt_regs usage] Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-03-28Disintegrate asm/system.h for PowerPCDavid Howells1-0/+5
Disintegrate asm/system.h for PowerPC. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> cc: linuxppc-dev@lists.ozlabs.org
2012-03-15powerpc/fsl-booke: Fixup calc_cam_sz to support MMU v2Kumar Gala1-0/+1
The registers that describe size supported by TLB are different on MMU v2 as well as we support power of two page sizes. For now we continue to assume that FSL variable size array supports all page sizes up to the maximum one reported in TLB1PS. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-25powerpc/book3e: Add ICSWX/ACOP support to Book3e cores like A2Jimi Xenidis1-0/+4
ICSWX is also used by the A2 processor to access coprocessors, although not all "chips" that contain A2s have coprocessors. Signed-off-by: Jimi Xenidis <jimix@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-17powerpc/book3e-64: Fix debug support for userspaceKumar Gala1-1/+1
With the introduction of CONFIG_PPC_ADV_DEBUG_REGS user space debug is broken on Book-E 64-bit parts that support delayed debug events. When switch_booke_debug_regs() sets DBCR0 we'll start getting debug events as MSR_DE is also set and we aren't able to handle debug events from kernel space. We can remove the hack that always enables MSR_DE and loads up DBCR0 and just utilize switch_booke_debug_regs() to get user space debug working again. We still need to handle critical/debug exception stacks & proper save/restore of state for those exception levles to support debug events from kernel space like we have on 32-bit. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-10-06powerpc/fsl-booke: Handle L1 D-cache parity error correctly on e500mcKumar Gala1-0/+3
If the L1 D-Cache is in write shadow mode the HW will auto-recover the error. However we might still log the error and cause a machine check (if L1CSR0[CPE] - Cache error checking enable). We should only treat the non-write shadow case as non-recoverable. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-07-12KVM: PPC: e500: Save/restore SPE stateScott Wood1-0/+1
This is done lazily. The SPE save will be done only if the guest has used SPE since the last preemption or heavyweight exit. Restore will be done only on demand, when enabling MSR_SPE in the shadow MSR, in response to an SPE fault or mtmsr emulation. For SPEFSCR, Linux already switches it on context switch (non-lazily), so the only remaining bit is to save it between qemu and the guest. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-19powerpc/e5500: set non-base IVORsScott Wood1-0/+4
Without this, we attempt to use doorbells for IPIs, and end up branching to some bad address. Plus, even for the exceptions we don't implement, it's good to handle it and get a message out. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-27powerpc: Add MSR_64BITMichael Ellerman1-2/+4
The MSR bit which indicates 64-bit-ness is different between server and booke, so add a #define which gives you the right mask regardless. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-31Fix common misspellingsLucas De Marchi1-1/+1
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-30powerpc/booke: Correct the SPRN_MAS5 definition.Varun Sethi1-1/+1
339 is the SPR number for MAS5 documented by Power ISA 2.06, and implemented by e500mc. It is not yet used anywhere in the kernel, so nothing should be relying on the wrong number. Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-04powerpc: Cleanup definition of the PID registerTseng-Hui (Frank) Lin1-3/+0
Move SPRN_PID declearations in various locations into one place. Signed-off-by: Tseng-Hui (Frank) Lin <thlin@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-12powerpc/85xx: add e500 HID1 bit definitionLi Yang1-0/+14
Also make 74xx HID1 definition conditional. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Shaohui Xie <b21989@freescale.com> Cc: Roy Zang <tie-fei.zang@freescale.com> Cc: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-07-14powerpc/book3e: Adjust the page sizes list based on MMU configBenjamin Herrenschmidt1-0/+1
Use the MMU config registers to scan for available direct and indirect page sizes and print out the result. Will be needed for future hugetlbfs implementation. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-09powerpc/book3e: Hack to get gdb moving along on Book3E 64-bitBenjamin Herrenschmidt1-2/+2
Our handling of debug interrupts on Book3E 64-bit is not quite the way it should be just yet. This is a workaround to let gdb work at least for now. We ensure that when context switching, we set the appropriate DBCR0 value for the new task. We also make sure that we turn off MSR[DE] within the kernel, and set it as part of the bits that get set when going back to userspace. In the long run, we will probably set the userspace DBCR0 on the exception exit code path and ensure we have some proper kernel value to set on the way into the kernel, a bit like ppc32 does, but that will take more work. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-21powerpc/e500mc: Implement machine check handler.Scott Wood1-10/+23
Most of the MSCR bit assigments are different in e500mc versus e500, and they are now write-one-to-clear. Some e500mc machine check conditions are made recoverable (as long as they aren't stuck on), most notably L1 instruction cache parity errors. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-05-05powerpc/47x: Base ppc476 supportDave Kleikamp1-0/+24
This patch adds the base support for the 476 processor. The code was primarily written by Ben Herrenschmidt and Torez Smith, but I've been maintaining it for a while. The goal is to have a single binary that will run on 44x and 47x, but we still have some details to work out. The biggest is that the L1 cache line size differs on the two platforms, but it's currently a compile-time option. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Torez Smith <lnxtorez@linux.vnet.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-03-09powerpc/booke: Fix a couple typos in the advanced ptrace codeDave Kleikamp1-2/+2
powerpc/booke: Fix a couple typos in the advanced ptrace code Found and fixed a couple typos in the advanced ptrace patches. (These patches are currently in benh's next tree.) Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linuxppc-dev list <Linuxppc-dev@ozlabs.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-17powerpc/booke: Add definitions for advanced debug registersDave Kleikamp1-1/+95
powerpc/booke: Add definitions for advanced debug registers From: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Based on patches originally written by Torez Smith. This patch adds additional definitions for BookE Debug Registers to the reg_booke.h header file. Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Acked-by: David Gibson <dwg@au1.ibm.com> Cc: Torez Smith <lnxtorez@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Sergio Durigan Junior <sergiodj@br.ibm.com> Cc: Thiago Jung Bauermann <bauerman@br.ibm.com> Cc: linuxppc-dev list <Linuxppc-dev@ozlabs.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-28powerpc/book3e-64: Add support to initial_tlb_book3e for non-HES TLBKumar Gala1-0/+2
We now search through TLBnCFG looking for the first array that has IPROT support (we assume that there is only one). If that TLB has hardware entry select (HES) support we use the existing code and with the proper TLB select (the HES code still needs to clean up bolted entries from firmware). The non-HES code is pretty similiar to the 32-bit FSL Book-E code but does make some new assumtions (like that we have tlbilx) and simplifies things down a bit. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-24powerpc/booke: Move MMUCSR definition into mmu-book3e.hKumar Gala1-6/+0
The MMUCSR is now defined as part of the Book-3E architecture so we can move it into mmu-book3e.h and add some of the additional bits defined by the architecture specs. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-20powerpc: Add SPR definitions for new 64-bit BookEBenjamin Herrenschmidt1-3/+39
This adds various SPRs defined on 64-bit BookE, along with changes to the definition of the base MSR values to add the values needed for 64-bit Book3E. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-15powerpc/fsl-booke: Enable L1 cache on e500v1/e500v2/e500mc CPUsNate Case1-0/+2
Some boot loaders may not enable L1 instruction/data cache. Check if data and instruction caches are enabled, and enable them if needed. Signed-off-by: Nate Case <ncase@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-04-02powerpc: Move SPEFSCR defines to common headerKumar Gala1-30/+0
SPEFSCR is a user space register and doesn't conflict with anything. Moving the defines of the various bit fields makes some emulation code have fewer ifdefs Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-11powerpc: Add defintion for MSR[GS] to list of MSR bitsTimur Tabi1-0/+1
Add macros for the GS (guest state) bit to the list of MSR bit definitions. On PowerPC cores that support embedded hypervisor mode, GS is cleared if the system is running in hypervisor state (and MSR[PR] is cleared), and set if it's running in guest state. See the Power ISA 2.06 specification for more information. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-28powerpc/fsl-booke: Cleanup init/exception setup to be runtimeKumar Gala1-0/+1
We currently have a few variants of fsl-booke processors (e500v1, e500v2, e500mc, and e200). They all have minor differences that we had previously been handling via ifdefs. To move towards having this support the following changes have been made: * PID1, PID2 only exist on e500v1 & e500v2 and should not be accessed on e500mc or e200. We use MMUCFG[NPIDS] to determine which case we are since we only touch PID1/2 in extremely early init code. * Not all IVORs exist on all the processors so introduce cpu_setup functions for each variant to setup the proper IVORs that are either unique or exist but have some variations between the processors Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-09-24powerpc: Introduce local (non-broadcast) forms of tlb invalidatesKumar Gala1-0/+7
Introduced a new set of low level tlb invalidate functions that do not broadcast invalidates on the bus: _tlbil_all - invalidate all _tlbil_pid - invalidate based on process id (or mm context) _tlbil_va - invalidate based on virtual address (ea + pid) On non-SMP configs _tlbil_all should be functionally equivalent to _tlbia and _tlbil_va should be functionally equivalent to _tlbie. The intent of this change is to handle SMP based invalidates via IPIs instead of broadcasts as the mechanism scales better for larger number of cores. On e500 (fsl-booke mmu) based cores move to using MMUCSR for invalidate alls and tlbsx/tlbwe for invalidate virtual address. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-08-04powerpc: Move include files to arch/powerpc/include/asmStephen Rothwell1-0/+501
from include/asm-powerpc. This is the result of a mkdir arch/powerpc/include/asm git mv include/asm-powerpc/* arch/powerpc/include/asm Followed by a few documentation/comment fixups and a couple of places where <asm-powepc/...> was being used explicitly. Of the latter only one was outside the arch code and it is a driver only built for powerpc. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>