summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2014-06-29Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds5-6/+42
Pull ARM fixes from Russell King: "Another round of ARM fixes. The largest change here is the L2 changes to work around problems for the Armada 37x/380 devices, where most of the size comes down to comments rather than code. The other significant fix here is for the ptrace code, to ensure that rewritten syscalls work as intended. This was pointed out by Kees Cook, but Will Deacon reworked the patch to be more elegant. The remainder are fairly trivial changes" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8087/1: ptrace: reload syscall number after secure_computing() check ARM: 8086/1: Set memblock limit for nommu ARM: 8085/1: sa1100: collie: add top boot mtd partition ARM: 8084/1: sa1100: collie: revert back to cfi_probe ARM: 8080/1: mcpm.h: remove unused variable declaration ARM: 8076/1: mm: add support for HW coherent systems in PL310 cache
2014-06-29ARM: 8087/1: ptrace: reload syscall number after secure_computing() checkWill Deacon1-3/+4
On the syscall tracing path, we call out to secure_computing() to allow seccomp to check the syscall number being attempted. As part of this, a SIGTRAP may be sent to the tracer and the syscall could be re-written by a subsequent SET_SYSCALL ptrace request. Unfortunately, this new syscall is ignored by the current code unless TIF_SYSCALL_TRACE is also set on the current thread. This patch slightly reworks the enter path of the syscall tracing code so that we always reload the syscall number from current_thread_info()->syscall after the potential ptrace traps. Acked-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-29ARM: 8086/1: Set memblock limit for nommuLaura Abbott1-0/+1
Commit 1c2f87c (ARM: 8025/1: Get rid of meminfo) changed find_limits to use memblock_get_current_limit for calculating the max_low pfn. nommu targets never actually set a limit on memblock though which means memblock_get_current_limit will just return the default value. Set the memblock_limit to be the end of DDR to make sure bounds are calculated correctly. Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-29ARM: 8085/1: sa1100: collie: add top boot mtd partitionAndrea Adami1-0/+5
The CFI mapping is now perfect so we can expose the top block, read only. There isn't much to read, though, just the sharpsl_params values. Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-29ARM: 8084/1: sa1100: collie: revert back to cfi_probeAndrea Adami1-1/+1
Reverts commit d26b17edafc45187c30cae134a5e5429d58ad676 ARM: sa1100: collie.c: fall back to jedec_probe flash detection Unfortunately the detection was challenged on the defective unit used for tests: one of the NOR chips did not respond to the CFI query. Moreover that bad device needed extra delays on erase-suspend/resume cycles. Tested personally on 3 different units and with feedback of two other users. Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-29ARM: 8080/1: mcpm.h: remove unused variable declarationNicolas Pitre1-2/+0
The sync_phys variable has been replaced by link time computation in mcpm_head.S before the code was submitted upstream. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-29ARM: 8076/1: mm: add support for HW coherent systems in PL310 cacheThomas Petazzoni1-0/+31
When a PL310 cache is used on a system that provides hardware coherency, the outer cache sync operation is useless, and can be skipped. Moreover, on some systems, it is harmful as it causes deadlocks between the Marvell coherency mechanism, the Marvell PCIe controller and the Cortex-A9. To avoid this, this commit introduces a new Device Tree property 'arm,io-coherent' for the L2 cache controller node, valid only for the PL310 cache. It identifies the usage of the PL310 cache in an I/O coherent configuration. Internally, it makes the driver disable the outer cache sync operation. Note that technically speaking, a fully coherent system wouldn't require any of the other .outer_cache operations. However, in practice, when booting secondary CPUs, these are not yet coherent, and therefore a set of cache maintenance operations are necessary at this point. This explains why we keep the other .outer_cache operations and only ->sync is disabled. While in theory any write to a PL310 register could cause the deadlock, in practice, disabling ->sync is sufficient to workaround the deadlock, since the other cache maintenance operations are only used in very specific situations. Contrary to previous versions of this patch, this new version does not simply NULL-ify the ->sync member, because the l2c_init_data structures are now 'const' and therefore cannot be modified, which is a good thing. Therefore, this patch introduces a separate l2c_init_data instance, called of_l2c310_coherent_data. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-25Merge tag 'fixes-for-linus' of ↵Linus Torvalds36-136/+137
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "A new set of bug fixes for 3.16, containing patches for seven platforms: at91: - drivers/misc fix for Kconfig PWM symbol - correction of several values in DT after conversion to CCF - fix at91sam9261/at91sam9261ek mistake in slow crystal vs. slow RC osc imx: - Use GPIO for card CD/WP on imx51-babbage and eukrea-mbimxsd51, because controller base CD/WP is not working in esdhc driver due to runtime PM support - A couple of random ventana gw5xxx board fixes - Add IMX_IPUV3_CORE back to defconfig, which gets lost when moving IPUv3 driver out of staging tree - Fix enet/fec clock selection on imx6sl - Fix display node on imx53-m53evk board - A couple of Cubox-i updates from Russell, which were omitted from the merge window due to dependency integrator: - fix an OF-related regression against 3.15 mvebu: - mvebu (v7) - Fix broken SoC ID detection - Select ARM_CPU_SUSPEND for v7 - Remove armada38x compatible string (no users yet) - Enable Dove SoC in mvebu_v7_defconfig - kirkwood - Fix phy-connection-type on GuruPlug board qcom: - enable gsbi driver in defconfig - fix section mismatch warning in serial driver samsung: - use WFI macro in platform_do_lowpower because exynos cpuhotplug includes a hardcoded WFI instruction and it causes compile error in Thumb-2 mode. - fix GIC reg sizes for exynos4 SoCs - remove reset timer counter value during boot and resume for mct to fix a big jump in printk timestamps - fix pm code to check cortex-A9 for another exynos SoCs - don't rely on firmware's secondary_cpu_start for mcpm sti: - Ethernet clocks were wrongly defined for STiH415/416 platforms - STiH416 B2020 revision E DTS file name contained uppercase, change to lowercase" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (33 commits) ARM: at91/dt: sam9261: remove slow RC osc ARM: at91/dt: define sam9261ek slow crystal frequency ARM: at91/dt: sam9261: correctly define mainck ARM: at91/dt: sam9n12: correct PLLA ICPLL and OUT values ARM: at91/dt: sam9x5: correct PLLA ICPLL and OUT values misc: atmel_pwm: fix Kconfig symbols ARM: integrator: fix OF-related regression ARM: mvebu: Fix the improper use of the compatible string armada38x using a wildcard ARM: dts: kirkwood: fix phy-connection-type for Guruplug ARM: EXYNOS: Don't rely on firmware's secondary_cpu_start for mcpm ARM: dts: imx51-eukrea-mbimxsd51-baseboard: unbreak esdhc. ARM: dts: imx51-babbage: Fix esdhc setup ARM: dts: mx5: Move the display out of soc {} node ARM: dts: mx5: Fix IPU port node placement ARM: mvebu: select ARM_CPU_SUSPEND for Marvell EBU v7 platforms ARM: mvebu: Fix broken SoC ID detection ARM: imx_v6_v7_defconfig: Enable CONFIG_IMX_IPUV3_CORE ARM: multi_v7_defconfig: Add QCOM GSBI driver ARM: stih41x: Rename stih416-b2020-revE.dts to stih416-b2020e.dts tty: serial: msm: Fix section mismatch warning ...
2014-06-25Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesArnd Bergmann4-18/+15
Merge "First AT91 fixes batch for 3.16" from Nicolas Ferre: - drivers/misc fix for Kconfig PWM symbol - correction of several values in DT after conversion to CCF - fix at91sam9261/at91sam9261ek mistake in slow crystal vs. slow RC osc * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91/dt: sam9261: remove slow RC osc ARM: at91/dt: define sam9261ek slow crystal frequency ARM: at91/dt: sam9261: correctly define mainck ARM: at91/dt: sam9n12: correct PLLA ICPLL and OUT values ARM: at91/dt: sam9x5: correct PLLA ICPLL and OUT values misc: atmel_pwm: fix Kconfig symbols
2014-06-25Merge tag 'mvebu-fixes-3.16' of git://git.infradead.org/linux-mvebu into fixesArnd Bergmann7-7/+9
Merge "mvebu fixes for v3.16" from Jason Cooper: - mvebu - Fix broken SoC ID detection - Select ARM_CPU_SUSPEND for v7 - Remove armada38x compatible string (no users yet) - kirkwood - Fix phy-connection-type on GuruPlug board * tag 'mvebu-fixes-3.16' of git://git.infradead.org/linux-mvebu: ARM: mvebu: Fix the improper use of the compatible string armada38x using a wildcard ARM: dts: kirkwood: fix phy-connection-type for Guruplug ARM: mvebu: select ARM_CPU_SUSPEND for Marvell EBU v7 platforms ARM: mvebu: Fix broken SoC ID detection
2014-06-25ARM: at91/dt: sam9261: remove slow RC oscAlexandre Belloni1-15/+2
The at91sam9261 doesn't actually have a slow RC oscillator, remove it from the dtsi. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-06-25ARM: at91/dt: define sam9261ek slow crystal frequencyAlexandre Belloni1-0/+4
Define at91sam9261ek's slow crystal frequencies. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-06-25ARM: at91/dt: sam9261: correctly define mainckAlexandre Belloni1-2/+8
mainck (CKGR_MCFR register) is actually using main_osc (CKGR_MOR register). Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-06-25ARM: at91/dt: sam9n12: correct PLLA ICPLL and OUT valuesAlexandre Belloni1-2/+2
ICPLL can only take 0 or 1, it got mixed with OUT which can be in the [0-3] range. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-06-25ARM: at91/dt: sam9x5: correct PLLA ICPLL and OUT valuesAlexandre Belloni1-2/+2
ICPLL can only take 0 or 1, it got mixed with OUT which can be in the [0-3] range. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-06-24Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds10-20/+25
Pull ARM fixes from Russell King: "A number of low impact fixes, the most noticable one is the thumb2 frame pointer fix. We also fix a regression caused during this merge window with ARM925 CPUs running with caches disabled, and fix a number of warnings" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: arm925: ensure assembly sets up writethrough mapping ARM: perf: fix compiler warning with gcc 4.6.4 (and tidy code) ARM: l2c: fix dependencies on PL310 errata symbols ARM: 8069/1: Make thread_save_fp macro aware of THUMB2 mode ARM: 8068/1: scoop: Remove unused variable
2014-06-24ARM: integrator: fix OF-related regressionLinus Walleij2-36/+13
Commit 07e461cd7e73a84f0e3757932b93cc80976fd749 "of: Ensure unique names without sacrificing determinism" caused a boot failure regression on the Integrator machines. The problem is probably caused by fiddling too much with the device tree population in the OF init function, such as passing the SoC bus device as parent when populating the device tree. This patch fixes the problem by: - Avoiding to explicitly look up the tree root - Look up devices needed before device population from the match only, passing NULL as root - Passing NULL as root and parent when calling of_platform_populate() After this the Integrators boot again. Tested on Integrator/AP and Integrator/CP. Cc: Grant Likely <grant.likely@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-24ARM: mvebu: Fix the improper use of the compatible string armada38x using a ↵Gregory CLEMENT5-5/+5
wildcard Wildcards in compatible strings should be avoid. "marvell,armada38x" was recently introduced but was not yet used. The armada 385 SoC is a superset of the armada 380 SoC (with more CPUs and more PCIe slots). So this patch replaces the use of "marvell,armada38x" by the "marvell,armada380" string. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1403533011-21339-1-git-send-email-gregory.clement@free-electrons.com Acked-by: Andrew Lunn <andrew@lunn.ch> Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-23ARM: dts: kirkwood: fix phy-connection-type for GuruplugSebastian Hesselbarth1-2/+2
Commit eeb845459a72e792a959278b858f9c417e9995bd ("ARM: dts: kirkwood: set Guruplug phy-connection-type to rgmii-id") added phy-connection-type properties to ethernet PHY nodes. Actually, the property has to be set for the ethernet port node instead. Fix it by moving the corresponding properties to the correct nodes. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: https://lkml.kernel.org/r/1403555115-13111-1-git-send-email-sebastian.hesselbarth@gmail.com Fixes: eeb845459a72: ('ARM: dts: kirkwood: set Guruplug phy-connection-type to rgmii-id') Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-23Merge tag 'imx-fixes-3.16' of ↵Arnd Bergmann13-47/+71
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Pull "i.MX fixes for 3.16" from Shawn Guo: - Use GPIO for card CD/WP on imx51-babbage and eukrea-mbimxsd51, because controller base CD/WP is not working in esdhc driver due to runtime PM support - A couple of random ventana gw5xxx board fixes - Add IMX_IPUV3_CORE back to defconfig, which gets lost when moving IPUv3 driver out of staging tree - Fix enet/fec clock selection on imx6sl - Fix display node on imx53-m53evk board - A couple of Cubox-i updates from Russell, which were omitted from the merge window due to dependency * tag 'imx-fixes-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx51-eukrea-mbimxsd51-baseboard: unbreak esdhc. ARM: dts: imx51-babbage: Fix esdhc setup ARM: dts: mx5: Move the display out of soc {} node ARM: dts: mx5: Fix IPU port node placement ARM: imx_v6_v7_defconfig: Enable CONFIG_IMX_IPUV3_CORE ARM: dts: hummingboard/cubox-i: move usb otg configuration to platform level ARM: dts: cubox-i: add support for PWM-driven front panel LED ARM: dts: imx6: ventana: correct gw52xx sgtl5000 clock source ARM: dts: imx6qdl-gw5xxx: Fix Linear Technology vendor prefix ARM: dts: imx6: ventana: fix include typo ARM: dts: imx6sl: correct the fec ipg clock source ARM: imx6sl: add missing enet clock for imx6sl
2014-06-22Merge tag 'samsung-fixes-1' of ↵Arnd Bergmann4-19/+17
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Merge Samsung fixes for 3.16 from Kukjin Kim: - use WFI macro in platform_do_lowpower because exynos cpuhotplug includes a hardcoded WFI instruction and it causes compile error in Thumb-2 mode. - fix GIC reg sizes for exynos4 SoCs - remove reset timer counter value during boot and resume for mct to fix a big jump in printk timestamps - fix pm code to check cortex-A9 for another exynos SoCs - don't rely on firmware's secondary_cpu_start for mcpm * tag 'samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Don't rely on firmware's secondary_cpu_start for mcpm ARM: EXYNOS: fix pm code to check for cortex A9 rather than the SoC clocksource: exynos_mct: Don't reset the counter during boot and resume ARM: dts: fix reg sizes of GIC for exynos4 ARM: EXYNOS: Use wfi macro in platform_do_lowpower Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-21ARM: EXYNOS: Don't rely on firmware's secondary_cpu_start for mcpmDoug Anderson1-5/+6
On exynos mcpm systems the firmware is hardcoded to jump to an address in SRAM (0x02073000) when secondary CPUs come up. By default the firmware puts a bunch of code at that location. That code expects the kernel to fill in a few slots with addresses that it uses to jump back to the kernel's entry point for secondary CPUs. Originally (on prerelease hardware) this firmware code contained a bunch of workarounds to deal with boot ROM bugs. However on all shipped hardware we simply use this code to redirect to a kernel function for bringing up the CPUs. Let's stop relying on the code provided by the bootloader and just plumb in our own (simple) code jump to the kernel. This has the nice benefit of fixing problems due to the fact that older bootloaders (like the one shipped on the Samsung Chromebook 2) might have put slightly different code into this location. Once suspend/resume is implemented for systems using exynos-mcpm we'll need to make sure we reinstall our fixed up code after resume. ...but that's not anything new since IRAM (and thus the address of the mcpm_entry_point) is lost across suspend/resume anyway. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-06-21ARM: dts: imx51-eukrea-mbimxsd51-baseboard: unbreak esdhc.Denis Carikli1-2/+2
The following commit: 89d7e5c mmc: sdhci-esdhc-imx: add runtime pm support has the effect of also disabling the hardware card detect in runtime pm. We switch to GPIO based detection to avoid this issue. This patch is based on: ARM: dts: imx51-babbage: Fix esdhc setup Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-06-21ARM: dts: imx51-babbage: Fix esdhc setupSascha Hauer1-5/+5
Since commit 89d7e5c13122 (mmc: sdhci-esdhc-imx: add runtime pm support), controller based card detection / write protection is not supported anymore by esdhc driver. Let's use GPIO for CD/WP on esdhc1 instead. While at it, fix cd gpio polarity for esdhc2. This is wrong and currently only works because the imx esdhc driver ignores the polarity. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-06-21ARM: dts: mx5: Move the display out of soc {} nodeMarek Vasut1-25/+23
Move the display {} node out of the soc {} node . This just aligns the DT with other boards, there is no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-06-21ARM: dts: mx5: Fix IPU port node placementMarek Vasut1-4/+4
The "port" node was misplaced in the original patch, therefore making the LCD dysfunctional on this board. Fix this by moving the "port" DT node into the "display {}" node. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-06-20ARM: mvebu: select ARM_CPU_SUSPEND for Marvell EBU v7 platformsThomas Petazzoni1-0/+1
On Marvell Armada platforms, the PMSU (Power Management Service Unit) controls a number of power management related activities, needed for things like suspend/resume, CPU hotplug, cpuidle or even simply SMP. Since cpuidle support was added for Armada XP, the pmsu.c file in arch/arm/mach-mvebu/ calls the cpu_suspend() and cpu_resume() ARM functions, which are only available when CONFIG_ARM_CPU_SUSPEND=y. Therefore, configurations that have CONFIG_ARM_CPU_SUSPEND disabled due to PM_SLEEP being disabled no longer build properly, due to undefined references to cpu_suspend() and cpu_resume(). To fix this, this patch simply ensures CONFIG_ARM_CPU_SUSPEND is always enabled for Marvell EBU v7 platforms. Doing things in a more fine-grained way would require a lot of #ifdef-ery in pmsu.c to isolate the parts that use cpu_suspend()/cpu_resume(), and those parts would anyway have been needed as soon as either one of suspend/resume, CPU hotplug or cpuidle was enabled. Reported-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1402488397-31381-1-git-send-email-thomas.petazzoni@free-electrons.com Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-20ARM: mvebu: Fix broken SoC ID detectionEzequiel Garcia1-0/+1
Currently the mvebu boards need to detect the SoC revision in order to apply some quirks needed to workaround issues found on I2C and thermal controllers present only in very early SoC. This detection requires PCI address translation to work, so we need to explicitly select OF_ADDRESS_PCI. This can be considered a partial revert of the following commit, that wrongly removed the option selection: commit 55400f3a1f89e39761f45c19f6e4235a329c400b Author: Rob Herring <robh@kernel.org> Date: Tue Apr 22 14:15:52 2014 -0500 ARM: mvebu: clean-up unneeded kconfig selects Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Link: https://lkml.kernel.org/r/1402347165-19988-1-git-send-email-ezequiel.garcia@free-electrons.com Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-20ARM: imx_v6_v7_defconfig: Enable CONFIG_IMX_IPUV3_COREFabio Estevam1-0/+1
Since commit 39b9004d1f (gpu: ipu-v3: Move i.MX IPUv3 core driver out of staging) the ipuv3 core driver is no longer built bey default. Select CONFIG_IMX_IPUV3_CORE so that the core ipuv3 code can be built again. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-06-20ARM: arm925: ensure assembly sets up writethrough mappingRussell King1-0/+1
Commit ca8f0b0a545f ("ARM: ensure C page table setup code follows assembly code") did what it said on the tin, but some of the older CPU code omitted the default cache policy from their files. This results in the kernel running with the caches disabled. Fix this for ARM925. Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-20ARM: multi_v7_defconfig: Add QCOM GSBI driverSrinivas Kandagatla1-0/+1
This patch adds QCOM GSBI config option to multi_v7_defconfig. Serial driver on QCOM APQ8064 depends on GSBI driver, so without this patch there is no serial console on IF6410 board using multi_v7_defconfig. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-20Merge tag 'sti-fixes-for-v3.16-rc1' of ↵Arnd Bergmann25-159/+219
git://git.stlinux.com/devel/kernel/linux-sti into fixes Merge "STi: DT fixes for v3.16" from Maxime Coquelin: Couple of DT fixes for STi platform issues discovered on V3.16-rc1. The fixes included are: - Ethernet clocks were wrongly defined for STiH415/416 platforms - STiH416 B2020 revision E DTS file name contained uppercase, change to lowercase. * tag 'sti-fixes-for-v3.16-rc1' of git://git.stlinux.com/devel/kernel/linux-sti: (2963 commits) ARM: stih41x: Rename stih416-b2020-revE.dts to stih416-b2020e.dts ARM: STi: DT: Properly define sti-ethclk & stmmaceth for stih415/6 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-19Merge tag 'fixes-for-linus' of ↵Linus Torvalds41-152/+113
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "A first set of bug fixes that didn't make it for the merge window, and two Kconfig cleanups that still make sense at this point. Unfortunately, one of the two cleanups caused an unintended change in the original version, so we had to revert one part of it and do some more testing to ensure the rest is really fine. There was also a last-minute rebase of the patches to remove another bad commit" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: use menuconfig for sub-arch menus ARM: multi_v7_defconfig: re-enable SDHCI drivers ARM: EXYNOS: Fix compilation warning ARM: exynos: move sysram info to exynos.c ARM: dts: Specify the NAND ECC scheme explicitly on Armada 385 DB board ARM: dts: Specify the NAND ECC scheme explicitly on Armada 375 DB board ARM: exynos: cleanup kconfig option display misc: vexpress: fix error handling vexpress_syscfg_regmap_init() ARM: Remove ARCH_HAS_CPUFREQ config option ARM: integrator: fix section mismatch problem ARM: mvebu: DT: fix OpenBlocks AX3-4 RAM size ARM: samsung: make SAMSUNG_DMADEV optional remoteproc: da8xx: don't select CMA on no-MMU bus/arm-cci: add dependency on OF && CPU_V7 ARM: keystone requires ARM_PATCH_PHYS_VIRT ARM: omap2: fix am43xx dependency on l2x0 cache
2014-06-19ARM: perf: fix compiler warning with gcc 4.6.4 (and tidy code)Russell King1-2/+2
GCC 4.6.4 spits out the following warning when building perf_event_v7.c: arch/arm/kernel/perf_event_v7.c: In function 'krait_pmu_get_event_idx': arch/arm/kernel/perf_event_v7.c:1927:6: warning: 'bit' may be used uninitialized in this function While upgrading the version of gcc may solve this, the code can also be organised to be more efficient by not carrying more local variables than is necessary across the armv7pmu_get_event_idx function call. If we set 'bit' to -1 (which is invalid for clear_bit) we can use that as an indication whether we need to clear a bit after this function. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-19ARM: l2c: fix dependencies on PL310 errata symbolsRussell King6-17/+16
A number of configurations spit out warnings similar to: warning: (SOC_IMX6 && SOC_VF610 && ARCH_OMAP4) selects PL310_ERRATA_588369 which has unmet direct dependencies (CACHE_L2X0) warning: (SOC_IMX6 && SOC_VF610 && ARCH_OMAP4) selects PL310_ERRATA_727915 which has unmet direct dependencies (CACHE_L2X0) Clean up the dependencies here: * PL310 symbols should only be selected when CACHE_L2X0 is enabled. * Since the cache-l2x0 code detects PL310 presence at runtime, and we will eventually get rid of CACHE_PL310, surround these errata options with an if CACHE_L2X0 conditional rather than repeating the dependency against each. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-19ARM: stih41x: Rename stih416-b2020-revE.dts to stih416-b2020e.dtsLee Jones2-1/+1
Two reasons for this rename. Firstly, it removes the camel case convention which isn't used by any other platform and secondly it matches the naming convention for the internal kernel, which can become annoying when flipping between the two. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2014-06-18ARM: mvebu: enable Dove SoC in mvebu_v7_defconfigEzequiel Garcia1-0/+2
Since commit: commit d93003e8e4e1fbbc8a06ec561a63f5aa105a4c45 Author: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Date: Thu Apr 24 22:58:30 2014 +0100 ARM: 8042/1: iwmmxt: allow to build iWMMXt on Marvell PJ4B fixed the error that prevented Dove SoC from being built with the rest of the mvebu SoCs, we can now add it to the defconfig. In addition, this commit enables SERIAL_OF_PLATFORM, which is required to have UART on some of the boards. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-18arm/ftrace: fix ftrace_return_addr() to ftrace_return_address()Steven Rostedt1-1/+1
The clean up of CALLER_ADDR*() functions required the archs to either use the default __builtin_return_address(X) (where X > 0) or override it with something the arch can use. To override it, the arch would define ftrace_return_address(x). The arm architecture requires this to be redefined but instead of defining ftrace_return_address(x) it defined ftrace_return_addr(x). Fixes: eed542d6962b (ftrace: Make CALLER_ADDRx macros more generic) Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-18ARM: EXYNOS: fix pm code to check for cortex A9 rather than the SoCAbhilash Kesavan1-6/+9
We have an soc check to ensure that the scu and certain A9 specific registers are not accessed on Exynos5250 (which is A15 based). Rather than adding another soc specific check for 5420 let us test for the Cortex A9 primary part number. This resolves the below crash seen on exynos5420 during core switching after the CPUIdle consolidation series was merged. [ 155.975589] [<c0013174>] (scu_enable) from [<c001b0dc>] (exynos_cpu_pm_notifier+0x80/0xc4) [ 155.983833] [<c001b0dc>] (exynos_cpu_pm_notifier) from [<c003c1b0>] (notifier_call_chain+0x44/0x84) [ 155.992851] [<c003c1b0>] (notifier_call_chain) from [<c007a49c>] (cpu_pm_notify+0x20/0x3c) [ 156.001089] [<c007a49c>] (cpu_pm_notify) from [<c007a564>] (cpu_pm_exit+0x20/0x38) [ 156.008635] [<c007a564>] (cpu_pm_exit) from [<c0019e98>] (bL_switcher_thread+0x298/0x40c) [ 156.016788] [<c0019e98>] (bL_switcher_thread) from [<c003842c>] (kthread+0xcc/0xe8) [ 156.024426] [<c003842c>] (kthread) from [<c000e438>] (ret_from_fork+0x14/0x3c) [ 156.031621] Code: ea017fec c0530a00 c052e3f8 c0012dcc (e5903000 Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-06-17ARM: use menuconfig for sub-arch menusRob Herring17-61/+33
The System Type menu is getting quite long with platforms and is inconsistent in handling of sub-arch specific options. Tidy up the menu by making platform options a menuconfig entry containing any platform specific config items. [arnd: change OMAP part according to suggestion from Tony Lindgren <tony@atomide.com>] Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-17ARM: multi_v7_defconfig: re-enable SDHCI driversStephen Warren1-0/+1
Following 5d01b7684b7e "mmc: simplify SDHCI Kconfig dependencies", SDHCI drivers that use MMC_SDHCI_PLTFM no longer select it, but instead depend on it. This means that multi_v7_defconfig no longer selects it, and hence many SDHCI drivers are no longer enabled. Explicitly enable MMC_SDHCI_PLTFM to solve this. Fixes: 5d01b7684b7e ("mmc: simplify SDHCI Kconfig dependencies") Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Matt Porter <mporter@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-17ARM: EXYNOS: Fix compilation warningSachin Kamat1-1/+1
of_get_flat_dt_prop return type is now const. Fixes the following compilation warning introduced by commit 9d0c4dfedd96 ("of/fdt: update of_get_flat_dt_prop in prep for libfdt") arch/arm/mach-exynos/exynos.c:259:6: warning: assignment discards ‘const’ qualifier from pointer target type [enabled by default] Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Tushar Behera <tushar.behera@linaro.org> Cc: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-17ARM: exynos: move sysram info to exynos.cOlof Johansson3-24/+32
This solves a problem with building with CONFIG_SMP=n due to missing sysram_base_addr (or sysram_ns_base_addr) variables. The new setup method is more awkward than I'd like for it to be, but it can't be done in init_early() since ioremap is not yet available, but it needs to happen before SMP. Reported-by: Russell King <linux@arm.linux.org.uk> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-17ARM: dts: Specify the NAND ECC scheme explicitly on Armada 385 DB boardEzequiel Garcia1-0/+2
The factory bootloader on A385-DB boards expect the ECC strength to be 4 bits over 512 bytes. Hence, we need to specify this in the devicetree, to prevent the kernel from assuming any different ECC scheme. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Link: https://lkml.kernel.org/r/1400941030-2123-3-git-send-email-ezequiel.garcia@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-17ARM: dts: Specify the NAND ECC scheme explicitly on Armada 375 DB boardEzequiel Garcia1-0/+2
The factory bootloader on A375-DB boards expect the ECC strength to be 4 bits over 512 bytes. Hence, we need to specify this in the devicetree, to prevent the kernel from assuming any different ECC scheme. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Link: https://lkml.kernel.org/r/1400941030-2123-2-git-send-email-ezequiel.garcia@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-17ARM: exynos: cleanup kconfig option displayRob Herring2-16/+4
The addition of Exynos to multi-platform configs creates a mess of config options with options appearing before the Exynos config option. This is due to arch/arm/plat-samsung/Kconfig being included out of order with the other Samsung platform kconfig files. Reorder the kconfig files and move all the options into a sub-menu. Some of the options are dead, so remove those as well. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: linux-samsung-soc@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-17ARM: Remove ARCH_HAS_CPUFREQ config optionStephen Boyd14-33/+0
This config exists entirely to hide the cpufreq menu from the kernel configuration unless a platform has selected it. Nothing is actually built if this config is 'Y' and it just leads to more patches that add a select under a platform Kconfig so that some other CPUfreq option can be chosen. Let's remove the option so that we can always enable CPUfreq drivers on ARM platforms. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-17ARM: integrator: fix section mismatch problemLinus Walleij2-2/+12
This addresses a section mismatch problem in the IM-PD1 driver in the Integrator/AP. The IM-PD1 contains a VIC interrupt controller and therefore the driver calls vic_init_cascaded() which is marked __init as irqchips are simply not hot-pluggable and specifically the VIC is assumed to initiate only on boot. However the module driver model of the Integrator LM bus assumes that logic tile drivers can be probed at runtime. This is not really the case for IM-PD1: these tiles are detected at boot and they cannot be plugged into a running system. Before this patch it is of course possible to modprobe them later. By first forcing the IM-PD1 to bool we make sure this driver gets compiled into the kernel, and we know it will be probed only at boot time when the tiles are detected, so we can tag its probe function __init_refok as we know it won't be called after boot now, and the section mismatch problem goes away. As a side effect, sysfs binding from userspace becomes impossible, so we tag the driver to suppress the bind/unbind sysfs attributes. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-17ARM: mvebu: DT: fix OpenBlocks AX3-4 RAM sizeJason Cooper1-1/+1
The OpenBlocks AX3-4 has a non-DT bootloader. It also comes with 1GB of soldered on RAM, and a DIMM slot for expansion. Unfortunately, atags_to_fdt() doesn't work in big-endian mode, so we see the following failure when attempting to boot a big-endian kernel: 686 slab pages 17 pages shared 0 pages swap cached [ pid ] uid tgid total_vm rss nr_ptes swapents oom_score_adj name Kernel panic - not syncing: Out of memory and no killable processes... CPU: 1 PID: 351 Comm: kworker/u4:0 Not tainted 3.15.0-rc8-next-20140603 #1 [<c0215a54>] (unwind_backtrace) from [<c021160c>] (show_stack+0x10/0x14) [<c021160c>] (show_stack) from [<c0802500>] (dump_stack+0x78/0x94) [<c0802500>] (dump_stack) from [<c0800068>] (panic+0x90/0x21c) [<c0800068>] (panic) from [<c02b5704>] (out_of_memory+0x320/0x340) [<c02b5704>] (out_of_memory) from [<c02b93a0>] (__alloc_pages_nodemask+0x874/0x930) [<c02b93a0>] (__alloc_pages_nodemask) from [<c02d446c>] (handle_mm_fault+0x744/0x96c) [<c02d446c>] (handle_mm_fault) from [<c02cf250>] (__get_user_pages+0xd0/0x4c0) [<c02cf250>] (__get_user_pages) from [<c02f3598>] (get_arg_page+0x54/0xbc) [<c02f3598>] (get_arg_page) from [<c02f3878>] (copy_strings+0x278/0x29c) [<c02f3878>] (copy_strings) from [<c02f38bc>] (copy_strings_kernel+0x20/0x28) [<c02f38bc>] (copy_strings_kernel) from [<c02f4f1c>] (do_execve+0x3a8/0x4c8) [<c02f4f1c>] (do_execve) from [<c025ac10>] (____call_usermodehelper+0x15c/0x194) [<c025ac10>] (____call_usermodehelper) from [<c020e9b8>] (ret_from_fork+0x14/0x3c) CPU0: stopping CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.15.0-rc8-next-20140603 #1 [<c0215a54>] (unwind_backtrace) from [<c021160c>] (show_stack+0x10/0x14) [<c021160c>] (show_stack) from [<c0802500>] (dump_stack+0x78/0x94) [<c0802500>] (dump_stack) from [<c021429c>] (handle_IPI+0x138/0x174) [<c021429c>] (handle_IPI) from [<c02087f0>] (armada_370_xp_handle_irq+0xb0/0xcc) [<c02087f0>] (armada_370_xp_handle_irq) from [<c0212100>] (__irq_svc+0x40/0x50) Exception stack(0xc0b6bf68 to 0xc0b6bfb0) bf60: e9fad598 00000000 00f509a3 00000000 c0b6a000 c0b724c4 bf80: c0b72458 c0b6a000 00000000 00000000 c0b66da0 c0b6a000 00000000 c0b6bfb0 bfa0: c027bb94 c027bb24 60000313 ffffffff [<c0212100>] (__irq_svc) from [<c027bb24>] (cpu_startup_entry+0x54/0x214) [<c027bb24>] (cpu_startup_entry) from [<c0ac5b30>] (start_kernel+0x318/0x37c) [<c0ac5b30>] (start_kernel) from [<00208078>] (0x208078) ---[ end Kernel panic - not syncing: Out of memory and no killable processes... A similar failure will also occur if ARM_ATAG_DTB_COMPAT isn't selected. Fix this by setting a sane default (1 GB) in the dts file. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Tested-by: Kevin Hilman <khilman@linaro.org> Cc: <stable@vger.kernel.org> #v3.13+ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-17ARM: samsung: make SAMSUNG_DMADEV optionalArnd Bergmann6-13/+16
The only remaining driver using the samsung dmadev code is the broken samsung-ac97 sound driver. However, as found by Russell's autobuilder, the elaborate dependency chains around it cause problems with circular dependencies. This is an attempt to simplify those dependencies by making the SAMSUNG_DMADEV option user-selectable. I also try to keep the default settings for all related options unchanged, so we don't introduce any regressions against earlier testing on linux-next. In particular, all s3c64xx and s5p* platforms keep selecting the pl330 and pl08x drivers they require, but the select statement is now moved towards the main platform option, and it remains optional by unselecting CONFIG_DMADEVICES. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 14:07:51 +0000