summaryrefslogtreecommitdiff
path: root/drivers/rapidio/rio.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/rapidio/rio.c')
-rw-r--r--drivers/rapidio/rio.c246
1 files changed, 239 insertions, 7 deletions
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index d553b5d13722..cb1c08996fbb 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -31,7 +31,11 @@
#include "rio.h"
+static LIST_HEAD(rio_devices);
+static DEFINE_SPINLOCK(rio_global_list_lock);
+
static LIST_HEAD(rio_mports);
+static DEFINE_MUTEX(rio_mport_list_lock);
static unsigned char next_portid;
static DEFINE_SPINLOCK(rio_mmap_lock);
@@ -53,6 +57,32 @@ u16 rio_local_get_device_id(struct rio_mport *port)
}
/**
+ * rio_add_device- Adds a RIO device to the device model
+ * @rdev: RIO device
+ *
+ * Adds the RIO device to the global device list and adds the RIO
+ * device to the RIO device list. Creates the generic sysfs nodes
+ * for an RIO device.
+ */
+int rio_add_device(struct rio_dev *rdev)
+{
+ int err;
+
+ err = device_add(&rdev->dev);
+ if (err)
+ return err;
+
+ spin_lock(&rio_global_list_lock);
+ list_add_tail(&rdev->global_list, &rio_devices);
+ spin_unlock(&rio_global_list_lock);
+
+ rio_create_sysfs_dev_files(rdev);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rio_add_device);
+
+/**
* rio_request_inb_mbox - request inbound mailbox service
* @mport: RIO master port from which to allocate the mailbox resource
* @dev_id: Device specific pointer to pass on event
@@ -489,6 +519,7 @@ rio_mport_get_physefb(struct rio_mport *port, int local,
return ext_ftr_ptr;
}
+EXPORT_SYMBOL_GPL(rio_mport_get_physefb);
/**
* rio_get_comptag - Begin or continue searching for a RIO device by component tag
@@ -521,6 +552,7 @@ exit:
spin_unlock(&rio_global_list_lock);
return rdev;
}
+EXPORT_SYMBOL_GPL(rio_get_comptag);
/**
* rio_set_port_lockout - Sets/clears LOCKOUT bit (RIO EM 1.3) for a switch port.
@@ -545,6 +577,107 @@ int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock)
regval);
return 0;
}
+EXPORT_SYMBOL_GPL(rio_set_port_lockout);
+
+/**
+ * rio_switch_init - Sets switch operations for a particular vendor switch
+ * @rdev: RIO device
+ * @do_enum: Enumeration/Discovery mode flag
+ *
+ * Searches the RIO switch ops table for known switch types. If the vid
+ * and did match a switch table entry, then call switch initialization
+ * routine to setup switch-specific routines.
+ */
+void rio_switch_init(struct rio_dev *rdev, int do_enum)
+{
+ struct rio_switch_ops *cur = __start_rio_switch_ops;
+ struct rio_switch_ops *end = __end_rio_switch_ops;
+
+ while (cur < end) {
+ if ((cur->vid == rdev->vid) && (cur->did == rdev->did)) {
+ pr_debug("RIO: calling init routine for %s\n",
+ rio_name(rdev));
+ cur->init_hook(rdev, do_enum);
+ break;
+ }
+ cur++;
+ }
+
+ if ((cur >= end) && (rdev->pef & RIO_PEF_STD_RT)) {
+ pr_debug("RIO: adding STD routing ops for %s\n",
+ rio_name(rdev));
+ rdev->rswitch->add_entry = rio_std_route_add_entry;
+ rdev->rswitch->get_entry = rio_std_route_get_entry;
+ rdev->rswitch->clr_table = rio_std_route_clr_table;
+ }
+
+ if (!rdev->rswitch->add_entry || !rdev->rswitch->get_entry)
+ printk(KERN_ERR "RIO: missing routing ops for %s\n",
+ rio_name(rdev));
+}
+EXPORT_SYMBOL_GPL(rio_switch_init);
+
+/**
+ * rio_enable_rx_tx_port - enable input receiver and output transmitter of
+ * given port
+ * @port: Master port associated with the RIO network
+ * @local: local=1 select local port otherwise a far device is reached
+ * @destid: Destination ID of the device to check host bit
+ * @hopcount: Number of hops to reach the target
+ * @port_num: Port (-number on switch) to enable on a far end device
+ *
+ * Returns 0 or 1 from on General Control Command and Status Register
+ * (EXT_PTR+0x3C)
+ */
+int rio_enable_rx_tx_port(struct rio_mport *port,
+ int local, u16 destid,
+ u8 hopcount, u8 port_num)
+{
+#ifdef CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS
+ u32 regval;
+ u32 ext_ftr_ptr;
+
+ /*
+ * enable rx input tx output port
+ */
+ pr_debug("rio_enable_rx_tx_port(local = %d, destid = %d, hopcount = "
+ "%d, port_num = %d)\n", local, destid, hopcount, port_num);
+
+ ext_ftr_ptr = rio_mport_get_physefb(port, local, destid, hopcount);
+
+ if (local) {
+ rio_local_read_config_32(port, ext_ftr_ptr +
+ RIO_PORT_N_CTL_CSR(0),
+ &regval);
+ } else {
+ if (rio_mport_read_config_32(port, destid, hopcount,
+ ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), &regval) < 0)
+ return -EIO;
+ }
+
+ if (regval & RIO_PORT_N_CTL_P_TYP_SER) {
+ /* serial */
+ regval = regval | RIO_PORT_N_CTL_EN_RX_SER
+ | RIO_PORT_N_CTL_EN_TX_SER;
+ } else {
+ /* parallel */
+ regval = regval | RIO_PORT_N_CTL_EN_RX_PAR
+ | RIO_PORT_N_CTL_EN_TX_PAR;
+ }
+
+ if (local) {
+ rio_local_write_config_32(port, ext_ftr_ptr +
+ RIO_PORT_N_CTL_CSR(0), regval);
+ } else {
+ if (rio_mport_write_config_32(port, destid, hopcount,
+ ext_ftr_ptr + RIO_PORT_N_CTL_CSR(port_num), regval) < 0)
+ return -EIO;
+ }
+#endif
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rio_enable_rx_tx_port);
+
/**
* rio_chk_dev_route - Validate route to the specified device.
@@ -610,6 +743,7 @@ rio_mport_chk_dev_access(struct rio_mport *mport, u16 destid, u8 hopcount)
return 0;
}
+EXPORT_SYMBOL_GPL(rio_mport_chk_dev_access);
/**
* rio_chk_dev_access - Validate access to the specified device.
@@ -941,6 +1075,7 @@ rio_mport_get_efb(struct rio_mport *port, int local, u16 destid,
return RIO_GET_BLOCK_ID(reg_val);
}
}
+EXPORT_SYMBOL_GPL(rio_mport_get_efb);
/**
* rio_mport_get_feature - query for devices' extended features
@@ -997,6 +1132,7 @@ rio_mport_get_feature(struct rio_mport * port, int local, u16 destid,
return 0;
}
+EXPORT_SYMBOL_GPL(rio_mport_get_feature);
/**
* rio_get_asm - Begin or continue searching for a RIO device by vid/did/asm_vid/asm_did
@@ -1246,6 +1382,95 @@ EXPORT_SYMBOL_GPL(rio_dma_prep_slave_sg);
#endif /* CONFIG_RAPIDIO_DMA_ENGINE */
+/**
+ * rio_find_mport - find RIO mport by its ID
+ * @mport_id: number (ID) of mport device
+ *
+ * Given a RIO mport number, the desired mport is located
+ * in the global list of mports. If the mport is found, a pointer to its
+ * data structure is returned. If no mport is found, %NULL is returned.
+ */
+struct rio_mport *rio_find_mport(int mport_id)
+{
+ struct rio_mport *port;
+
+ mutex_lock(&rio_mport_list_lock);
+ list_for_each_entry(port, &rio_mports, node) {
+ if (port->id == mport_id)
+ goto found;
+ }
+ port = NULL;
+found:
+ mutex_unlock(&rio_mport_list_lock);
+
+ return port;
+}
+
+/**
+ * rio_register_scan - enumeration/discovery method registration interface
+ * @mport_id: mport device ID for which fabric scan routine has to be set
+ * (RIO_MPORT_ANY = set for all available mports)
+ * @scan_ops: enumeration/discovery control structure
+ *
+ * Assigns enumeration or discovery method to the specified mport device (or all
+ * available mports if RIO_MPORT_ANY is specified).
+ * Returns error if the mport already has an enumerator attached to it.
+ * In case of RIO_MPORT_ANY ignores ports with valid scan routines and returns
+ * an error if was unable to find at least one available mport.
+ */
+int rio_register_scan(int mport_id, struct rio_scan *scan_ops)
+{
+ struct rio_mport *port;
+ int rc = -EBUSY;
+
+ mutex_lock(&rio_mport_list_lock);
+ list_for_each_entry(port, &rio_mports, node) {
+ if (port->id == mport_id || mport_id == RIO_MPORT_ANY) {
+ if (port->nscan && mport_id == RIO_MPORT_ANY)
+ continue;
+ else if (port->nscan)
+ break;
+
+ port->nscan = scan_ops;
+ rc = 0;
+
+ if (mport_id != RIO_MPORT_ANY)
+ break;
+ }
+ }
+ mutex_unlock(&rio_mport_list_lock);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(rio_register_scan);
+
+/**
+ * rio_unregister_scan - removes enumeration/discovery method from mport
+ * @mport_id: mport device ID for which fabric scan routine has to be
+ * unregistered (RIO_MPORT_ANY = set for all available mports)
+ *
+ * Removes enumeration or discovery method assigned to the specified mport
+ * device (or all available mports if RIO_MPORT_ANY is specified).
+ */
+int rio_unregister_scan(int mport_id)
+{
+ struct rio_mport *port;
+
+ mutex_lock(&rio_mport_list_lock);
+ list_for_each_entry(port, &rio_mports, node) {
+ if (port->id == mport_id || mport_id == RIO_MPORT_ANY) {
+ if (port->nscan)
+ port->nscan = NULL;
+ if (mport_id != RIO_MPORT_ANY)
+ break;
+ }
+ }
+ mutex_unlock(&rio_mport_list_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rio_unregister_scan);
+
static void rio_fixup_device(struct rio_dev *dev)
{
}
@@ -1274,7 +1499,7 @@ static void disc_work_handler(struct work_struct *_work)
work = container_of(_work, struct rio_disc_work, work);
pr_debug("RIO: discovery work for mport %d %s\n",
work->mport->id, work->mport->name);
- rio_disc_mport(work->mport);
+ work->mport->nscan->discover(work->mport, 0);
}
int rio_init_mports(void)
@@ -1290,12 +1515,15 @@ int rio_init_mports(void)
* First, run enumerations and check if we need to perform discovery
* on any of the registered mports.
*/
+ mutex_lock(&rio_mport_list_lock);
list_for_each_entry(port, &rio_mports, node) {
- if (port->host_deviceid >= 0)
- rio_enum_mport(port);
- else
+ if (port->host_deviceid >= 0) {
+ if (port->nscan)
+ port->nscan->enumerate(port, 0);
+ } else
n++;
}
+ mutex_unlock(&rio_mport_list_lock);
if (!n)
goto no_disc;
@@ -1322,14 +1550,16 @@ int rio_init_mports(void)
}
n = 0;
+ mutex_lock(&rio_mport_list_lock);
list_for_each_entry(port, &rio_mports, node) {
- if (port->host_deviceid < 0) {
+ if (port->host_deviceid < 0 && port->nscan) {
work[n].mport = port;
INIT_WORK(&work[n].work, disc_work_handler);
queue_work(rio_wq, &work[n].work);
n++;
}
}
+ mutex_unlock(&rio_mport_list_lock);
flush_workqueue(rio_wq);
pr_debug("RIO: destroy discovery workqueue\n");
@@ -1342,8 +1572,6 @@ no_disc:
return 0;
}
-device_initcall_sync(rio_init_mports);
-
static int hdids[RIO_MAX_MPORTS + 1];
static int rio_get_hdid(int index)
@@ -1371,7 +1599,10 @@ int rio_register_mport(struct rio_mport *port)
port->id = next_portid++;
port->host_deviceid = rio_get_hdid(port->id);
+ port->nscan = NULL;
+ mutex_lock(&rio_mport_list_lock);
list_add_tail(&port->node, &rio_mports);
+ mutex_unlock(&rio_mport_list_lock);
return 0;
}
@@ -1386,3 +1617,4 @@ EXPORT_SYMBOL_GPL(rio_request_inb_mbox);
EXPORT_SYMBOL_GPL(rio_release_inb_mbox);
EXPORT_SYMBOL_GPL(rio_request_outb_mbox);
EXPORT_SYMBOL_GPL(rio_release_outb_mbox);
+EXPORT_SYMBOL_GPL(rio_init_mports);