diff options
Diffstat (limited to 'drivers/media/dvb/frontends/dibx000_common.h')
| -rw-r--r-- | drivers/media/dvb/frontends/dibx000_common.h | 280 |
1 files changed, 0 insertions, 280 deletions
diff --git a/drivers/media/dvb/frontends/dibx000_common.h b/drivers/media/dvb/frontends/dibx000_common.h deleted file mode 100644 index 5f484881d7b1..000000000000 --- a/drivers/media/dvb/frontends/dibx000_common.h +++ /dev/null @@ -1,280 +0,0 @@ -#ifndef DIBX000_COMMON_H -#define DIBX000_COMMON_H - -enum dibx000_i2c_interface { - DIBX000_I2C_INTERFACE_TUNER = 0, - DIBX000_I2C_INTERFACE_GPIO_1_2 = 1, - DIBX000_I2C_INTERFACE_GPIO_3_4 = 2, - DIBX000_I2C_INTERFACE_GPIO_6_7 = 3 -}; - -struct dibx000_i2c_master { -#define DIB3000MC 1 -#define DIB7000 2 -#define DIB7000P 11 -#define DIB7000MC 12 -#define DIB8000 13 - u16 device_rev; - - enum dibx000_i2c_interface selected_interface; - -/* struct i2c_adapter tuner_i2c_adap; */ - struct i2c_adapter gated_tuner_i2c_adap; - struct i2c_adapter master_i2c_adap_gpio12; - struct i2c_adapter master_i2c_adap_gpio34; - struct i2c_adapter master_i2c_adap_gpio67; - - struct i2c_adapter *i2c_adap; - u8 i2c_addr; - - u16 base_reg; - - /* for the I2C transfer */ - struct i2c_msg msg[34]; - u8 i2c_write_buffer[8]; - u8 i2c_read_buffer[2]; - struct mutex i2c_buffer_lock; -}; - -extern int dibx000_init_i2c_master(struct dibx000_i2c_master *mst, - u16 device_rev, struct i2c_adapter *i2c_adap, - u8 i2c_addr); -extern struct i2c_adapter *dibx000_get_i2c_adapter(struct dibx000_i2c_master - *mst, - enum dibx000_i2c_interface - intf, int gating); -extern void dibx000_exit_i2c_master(struct dibx000_i2c_master *mst); -extern void dibx000_reset_i2c_master(struct dibx000_i2c_master *mst); -extern int dibx000_i2c_set_speed(struct i2c_adapter *i2c_adap, u16 speed); - -extern u32 systime(void); - -#define BAND_LBAND 0x01 -#define BAND_UHF 0x02 -#define BAND_VHF 0x04 -#define BAND_SBAND 0x08 -#define BAND_FM 0x10 -#define BAND_CBAND 0x20 - -#define BAND_OF_FREQUENCY(freq_kHz) ((freq_kHz) <= 170000 ? BAND_CBAND : \ - (freq_kHz) <= 115000 ? BAND_FM : \ - (freq_kHz) <= 250000 ? BAND_VHF : \ - (freq_kHz) <= 863000 ? BAND_UHF : \ - (freq_kHz) <= 2000000 ? BAND_LBAND : BAND_SBAND ) - -struct dibx000_agc_config { - /* defines the capabilities of this AGC-setting - using the BAND_-defines */ - u8 band_caps; - - u16 setup; - - u16 inv_gain; - u16 time_stabiliz; - - u8 alpha_level; - u16 thlock; - - u8 wbd_inv; - u16 wbd_ref; - u8 wbd_sel; - u8 wbd_alpha; - - u16 agc1_max; - u16 agc1_min; - u16 agc2_max; - u16 agc2_min; - - u8 agc1_pt1; - u8 agc1_pt2; - u8 agc1_pt3; - - u8 agc1_slope1; - u8 agc1_slope2; - - u8 agc2_pt1; - u8 agc2_pt2; - - u8 agc2_slope1; - u8 agc2_slope2; - - u8 alpha_mant; - u8 alpha_exp; - - u8 beta_mant; - u8 beta_exp; - - u8 perform_agc_softsplit; - - struct { - u16 min; - u16 max; - u16 min_thres; - u16 max_thres; - } split; -}; - -struct dibx000_bandwidth_config { - u32 internal; - u32 sampling; - - u8 pll_prediv; - u8 pll_ratio; - u8 pll_range; - u8 pll_reset; - u8 pll_bypass; - - u8 enable_refdiv; - u8 bypclk_div; - u8 IO_CLK_en_core; - u8 ADClkSrc; - u8 modulo; - - u16 sad_cfg; - - u32 ifreq; - u32 timf; - - u32 xtal_hz; -}; - -enum dibx000_adc_states { - DIBX000_SLOW_ADC_ON = 0, - DIBX000_SLOW_ADC_OFF, - DIBX000_ADC_ON, - DIBX000_ADC_OFF, - DIBX000_VBG_ENABLE, - DIBX000_VBG_DISABLE, -}; - -#define BANDWIDTH_TO_KHZ(v) ((v) / 1000) -#define BANDWIDTH_TO_HZ(v) ((v) * 1000) - -/* Chip output mode. */ -#define OUTMODE_HIGH_Z 0 -#define OUTMODE_MPEG2_PAR_GATED_CLK 1 -#define OUTMODE_MPEG2_PAR_CONT_CLK 2 -#define OUTMODE_MPEG2_SERIAL 7 -#define OUTMODE_DIVERSITY 4 -#define OUTMODE_MPEG2_FIFO 5 -#define OUTMODE_ANALOG_ADC 6 - -#define INPUT_MODE_OFF 0x11 -#define INPUT_MODE_DIVERSITY 0x12 -#define INPUT_MODE_MPEG 0x13 - -enum frontend_tune_state { - CT_TUNER_START = 10, - CT_TUNER_STEP_0, - CT_TUNER_STEP_1, - CT_TUNER_STEP_2, - CT_TUNER_STEP_3, - CT_TUNER_STEP_4, - CT_TUNER_STEP_5, - CT_TUNER_STEP_6, - CT_TUNER_STEP_7, - CT_TUNER_STOP, - - CT_AGC_START = 20, - CT_AGC_STEP_0, - CT_AGC_STEP_1, - CT_AGC_STEP_2, - CT_AGC_STEP_3, - CT_AGC_STEP_4, - CT_AGC_STOP, - - CT_DEMOD_START = 30, - CT_DEMOD_STEP_1, - CT_DEMOD_STEP_2, - CT_DEMOD_STEP_3, - CT_DEMOD_STEP_4, - CT_DEMOD_STEP_5, - CT_DEMOD_STEP_6, - CT_DEMOD_STEP_7, - CT_DEMOD_STEP_8, - CT_DEMOD_STEP_9, - CT_DEMOD_STEP_10, - CT_DEMOD_SEARCH_NEXT = 41, - CT_DEMOD_STEP_LOCKED, - CT_DEMOD_STOP, - - CT_DONE = 100, - CT_SHUTDOWN, - -}; - -struct dvb_frontend_parametersContext { -#define CHANNEL_STATUS_PARAMETERS_UNKNOWN 0x01 -#define CHANNEL_STATUS_PARAMETERS_SET 0x02 - u8 status; - u32 tune_time_estimation[2]; - s32 tps_available; - u16 tps[9]; -}; - -#define FE_STATUS_TUNE_FAILED 0 -#define FE_STATUS_TUNE_TIMED_OUT -1 -#define FE_STATUS_TUNE_TIME_TOO_SHORT -2 -#define FE_STATUS_TUNE_PENDING -3 -#define FE_STATUS_STD_SUCCESS -4 -#define FE_STATUS_FFT_SUCCESS -5 -#define FE_STATUS_DEMOD_SUCCESS -6 -#define FE_STATUS_LOCKED -7 -#define FE_STATUS_DATA_LOCKED -8 - -#define FE_CALLBACK_TIME_NEVER 0xffffffff - -#define ABS(x) ((x < 0) ? (-x) : (x)) - -#define DATA_BUS_ACCESS_MODE_8BIT 0x01 -#define DATA_BUS_ACCESS_MODE_16BIT 0x02 -#define DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT 0x10 - -struct dibGPIOFunction { -#define BOARD_GPIO_COMPONENT_BUS_ADAPTER 1 -#define BOARD_GPIO_COMPONENT_DEMOD 2 - u8 component; - -#define BOARD_GPIO_FUNCTION_BOARD_ON 1 -#define BOARD_GPIO_FUNCTION_BOARD_OFF 2 -#define BOARD_GPIO_FUNCTION_COMPONENT_ON 3 -#define BOARD_GPIO_FUNCTION_COMPONENT_OFF 4 -#define BOARD_GPIO_FUNCTION_SUBBAND_PWM 5 -#define BOARD_GPIO_FUNCTION_SUBBAND_GPIO 6 - u8 function; - -/* mask, direction and value are used specify which GPIO to change GPIO0 - * is LSB and possible GPIO31 is MSB. The same bit-position as in the - * mask is used for the direction and the value. Direction == 1 is OUT, - * 0 == IN. For direction "OUT" value is either 1 or 0, for direction IN - * value has no meaning. - * - * In case of BOARD_GPIO_FUNCTION_PWM mask is giving the GPIO to be - * used to do the PWM. Direction gives the PWModulator to be used. - * Value gives the PWM value in device-dependent scale. - */ - u32 mask; - u32 direction; - u32 value; -}; - -#define MAX_NB_SUBBANDS 8 -struct dibSubbandSelection { - u8 size; /* Actual number of subbands. */ - struct { - u16 f_mhz; - struct dibGPIOFunction gpio; - } subband[MAX_NB_SUBBANDS]; -}; - -#define DEMOD_TIMF_SET 0x00 -#define DEMOD_TIMF_GET 0x01 -#define DEMOD_TIMF_UPDATE 0x02 - -#define MPEG_ON_DIBTX 1 -#define DIV_ON_DIBTX 2 -#define ADC_ON_DIBTX 3 -#define DEMOUT_ON_HOSTBUS 4 -#define DIBTX_ON_HOSTBUS 5 -#define MPEG_ON_HOSTBUS 6 - -#endif |