diff options
Diffstat (limited to 'drivers/ata/ahci.c')
| -rw-r--r-- | drivers/ata/ahci.c | 28 |
1 files changed, 19 insertions, 9 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 5f039f191067..e45f83789809 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -60,6 +60,7 @@ enum board_ids { /* board IDs by feature in alphabetical order */ board_ahci, board_ahci_ign_iferr, + board_ahci_nomsi, board_ahci_noncq, board_ahci_nosntf, board_ahci_yes_fbs, @@ -121,6 +122,13 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, + [board_ahci_nomsi] = { + AHCI_HFLAGS (AHCI_HFLAG_NO_MSI), + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, [board_ahci_noncq] = { AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ), .flags = AHCI_FLAG_COMMON, @@ -313,6 +321,11 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x8c87), board_ahci }, /* 9 Series RAID */ { PCI_VDEVICE(INTEL, 0x8c8e), board_ahci }, /* 9 Series RAID */ { PCI_VDEVICE(INTEL, 0x8c8f), board_ahci }, /* 9 Series RAID */ + { PCI_VDEVICE(INTEL, 0xa103), board_ahci }, /* Sunrise Point-H AHCI */ + { PCI_VDEVICE(INTEL, 0xa103), board_ahci }, /* Sunrise Point-H RAID */ + { PCI_VDEVICE(INTEL, 0xa105), board_ahci }, /* Sunrise Point-H RAID */ + { PCI_VDEVICE(INTEL, 0xa107), board_ahci }, /* Sunrise Point-H RAID */ + { PCI_VDEVICE(INTEL, 0xa10f), board_ahci }, /* Sunrise Point-H RAID */ /* JMicron 360/1/3/5/6, match class to avoid IDE function */ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, @@ -475,10 +488,10 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1062 */ /* - * Samsung SSDs found on some macbooks. NCQ times out. - * https://bugzilla.kernel.org/show_bug.cgi?id=60731 + * Samsung SSDs found on some macbooks. NCQ times out if MSI is + * enabled. https://bugzilla.kernel.org/show_bug.cgi?id=60731 */ - { PCI_VDEVICE(SAMSUNG, 0x1600), board_ahci_noncq }, + { PCI_VDEVICE(SAMSUNG, 0x1600), board_ahci_nomsi }, /* Enmotus */ { PCI_DEVICE(0x1c44, 0x8000), board_ahci }, @@ -514,12 +527,9 @@ MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)"); static void ahci_pci_save_initial_config(struct pci_dev *pdev, struct ahci_host_priv *hpriv) { - unsigned int force_port_map = 0; - unsigned int mask_port_map = 0; - if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361) { dev_info(&pdev->dev, "JMB361 has only one port\n"); - force_port_map = 1; + hpriv->force_port_map = 1; } /* @@ -529,9 +539,9 @@ static void ahci_pci_save_initial_config(struct pci_dev *pdev, */ if (hpriv->flags & AHCI_HFLAG_MV_PATA) { if (pdev->device == 0x6121) - mask_port_map = 0x3; + hpriv->mask_port_map = 0x3; else - mask_port_map = 0xf; + hpriv->mask_port_map = 0xf; dev_info(&pdev->dev, "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n"); } |