diff options
Diffstat (limited to 'drivers/acpi')
-rw-r--r-- | drivers/acpi/Kconfig | 14 | ||||
-rw-r--r-- | drivers/acpi/asus_acpi.c | 62 | ||||
-rw-r--r-- | drivers/acpi/ibm_acpi.c | 1037 | ||||
-rw-r--r-- | drivers/acpi/toshiba_acpi.c | 88 |
4 files changed, 1011 insertions, 190 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 0ed801229675..b0897a0b206c 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -173,6 +173,7 @@ config ACPI_NUMA config ACPI_ASUS tristate "ASUS/Medion Laptop Extras" depends on X86 + select BACKLIGHT_CLASS_DEVICE ---help--- This driver provides support for extra features of ACPI-compatible ASUS laptops. As some of Medion laptops are made by ASUS, it may also @@ -201,6 +202,7 @@ config ACPI_ASUS config ACPI_IBM tristate "IBM ThinkPad Laptop Extras" depends on X86 + select BACKLIGHT_CLASS_DEVICE ---help--- This is a Linux ACPI driver for the IBM ThinkPad laptops. It adds support for Fn-Fx key combinations, Bluetooth control, video @@ -223,9 +225,21 @@ config ACPI_IBM_DOCK If you are not sure, say N here. +config ACPI_IBM_BAY + bool "Legacy Removable Bay Support" + depends on ACPI_IBM + depends on ACPI_BAY=n + default n + ---help--- + Allows the ibm_acpi driver to handle removable bays. + This support is obsoleted by CONFIG_ACPI_BAY. + + If you are not sure, say N here. + config ACPI_TOSHIBA tristate "Toshiba Laptop Extras" depends on X86 + select BACKLIGHT_CLASS_DEVICE ---help--- This driver adds support for access to certain system settings on "legacy free" Toshiba laptops. These laptops can be recognized by diff --git a/drivers/acpi/asus_acpi.c b/drivers/acpi/asus_acpi.c index c7ac9297a204..bf7bc25e680e 100644 --- a/drivers/acpi/asus_acpi.c +++ b/drivers/acpi/asus_acpi.c @@ -35,6 +35,7 @@ #include <linux/init.h> #include <linux/types.h> #include <linux/proc_fs.h> +#include <linux/backlight.h> #include <acpi/acpi_drivers.h> #include <acpi/acpi_bus.h> #include <asm/uaccess.h> @@ -402,6 +403,8 @@ static struct model_data model_conf[END_MODEL] = { /* procdir we use */ static struct proc_dir_entry *asus_proc_dir; +static struct backlight_device *asus_backlight_device; + /* * This header is made available to allow proper configuration given model, * revision number , ... this info cannot go in struct asus_hotk because it is @@ -779,7 +782,7 @@ proc_write_lcd(struct file *file, const char __user * buffer, return rv; } -static int read_brightness(void) +static int read_brightness(struct backlight_device *bd) { int value; @@ -801,9 +804,10 @@ static int read_brightness(void) /* * Change the brightness level */ -static void set_brightness(int value) +static int set_brightness(int value) { acpi_status status = 0; + int ret = 0; /* SPLV laptop */ if (hotk->methods->brightness_set) { @@ -811,11 +815,12 @@ static void set_brightness(int value) value, NULL)) printk(KERN_WARNING "Asus ACPI: Error changing brightness\n"); - return; + ret = -EIO; + goto out; } /* No SPLV method if we are here, act as appropriate */ - value -= read_brightness(); + value -= read_brightness(NULL); while (value != 0) { status = acpi_evaluate_object(NULL, (value > 0) ? hotk->methods->brightness_up : @@ -825,15 +830,22 @@ static void set_brightness(int value) if (ACPI_FAILURE(status)) printk(KERN_WARNING "Asus ACPI: Error changing brightness\n"); + ret = -EIO; } - return; +out: + return ret; +} + +static int set_brightness_status(struct backlight_device *bd) +{ + return set_brightness(bd->props->brightness); } static int proc_read_brn(char *page, char **start, off_t off, int count, int *eof, void *data) { - return sprintf(page, "%d\n", read_brightness()); + return sprintf(page, "%d\n", read_brightness(NULL)); } static int @@ -1333,6 +1345,26 @@ static int asus_hotk_remove(struct acpi_device *device, int type) return 0; } +static struct backlight_properties asus_backlight_data = { + .owner = THIS_MODULE, + .get_brightness = read_brightness, + .update_status = set_brightness_status, + .max_brightness = 15, +}; + +static void __exit asus_acpi_exit(void) +{ + if (asus_backlight_device) + backlight_device_unregister(asus_backlight_device); + + acpi_bus_unregister_driver(&asus_hotk_driver); + remove_proc_entry(PROC_ASUS, acpi_root_dir); + + kfree(asus_info); + + return; +} + static int __init asus_acpi_init(void) { int result; @@ -1370,17 +1402,15 @@ static int __init asus_acpi_init(void) return result; } - return 0; -} - -static void __exit asus_acpi_exit(void) -{ - acpi_bus_unregister_driver(&asus_hotk_driver); - remove_proc_entry(PROC_ASUS, acpi_root_dir); - - kfree(asus_info); + asus_backlight_device = backlight_device_register("asus", NULL, + &asus_backlight_data); + if (IS_ERR(asus_backlight_device)) { + printk(KERN_ERR "Could not register asus backlight device\n"); + asus_backlight_device = NULL; + asus_acpi_exit(); + } - return; + return 0; } module_init(asus_acpi_init); diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index 003a9876c968..92e7b6eb8f19 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -3,6 +3,7 @@ * * * Copyright (C) 2004-2005 Borislav Deianov <borislav@users.sf.net> + * Copyright (C) 2006 Henrique de Moraes Holschuh <hmh@hmh.eng.br> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -19,10 +20,14 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define IBM_VERSION "0.12a" +#define IBM_VERSION "0.13" /* * Changelog: + * + * 2006-11-22 0.13 new maintainer + * changelog now lives in git commit history, and will + * not be updated further in-file. * * 2005-08-17 0.12 fix compilation on 2.6.13-rc kernels * 2005-03-17 0.11 support for 600e, 770x @@ -77,9 +82,16 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/types.h> +#include <linux/string.h> + #include <linux/proc_fs.h> +#include <linux/backlight.h> #include <asm/uaccess.h> +#include <linux/dmi.h> +#include <linux/jiffies.h> +#include <linux/workqueue.h> + #include <acpi/acpi_drivers.h> #include <acpi/acnamesp.h> @@ -88,7 +100,7 @@ #define IBM_FILE "ibm_acpi" #define IBM_URL "http://ibm-acpi.sf.net/" -MODULE_AUTHOR("Borislav Deianov"); +MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh"); MODULE_DESCRIPTION(IBM_DESC); MODULE_VERSION(IBM_VERSION); MODULE_LICENSE("GPL"); @@ -116,28 +128,6 @@ static acpi_handle root_handle = NULL; static char *object##_path; \ static char *object##_paths[] = { paths } -/* - * The following models are supported to various degrees: - * - * 570, 600e, 600x, 770e, 770x - * A20m, A21e, A21m, A21p, A22p, A30, A30p, A31, A31p - * G40, G41 - * R30, R31, R32, R40, R40e, R50, R50e, R50p, R51 - * T20, T21, T22, T23, T30, T40, T40p, T41, T41p, T42, T42p, T43 - * X20, X21, X22, X23, X24, X30, X31, X40 - * - * The following models have no supported features: - * - * 240, 240x, i1400 - * - * Still missing DSDTs for the following models: - * - * A20p, A22e, A22m - * R52 - * S31 - * T43p - */ - IBM_HANDLE(ec, root, "\\_SB.PCI0.ISA.EC0", /* 240, 240x */ "\\_SB.PCI.ISA.EC", /* 570 */ "\\_SB.PCI0.ISA0.EC0", /* 600e/x, 770e, 770x */ @@ -167,8 +157,10 @@ IBM_HANDLE(dock, root, "\\_SB.GDCK", /* X30, X31, X40 */ "\\_SB.PCI.ISA.SLCE", /* 570 */ ); /* A21e,G4x,R30,R31,R32,R40,R40e,R50e */ #endif +#ifdef CONFIG_ACPI_IBM_BAY IBM_HANDLE(bay, root, "\\_SB.PCI.IDE.SECN.MAST", /* 570 */ "\\_SB.PCI0.IDE0.IDES.IDSM", /* 600e/x, 770e, 770x */ + "\\_SB.PCI0.SATA.SCND.MSTR", /* T60, X60, Z60 */ "\\_SB.PCI0.IDE0.SCND.MSTR", /* all others */ ); /* A21e, R30, R31 */ @@ -183,6 +175,7 @@ IBM_HANDLE(bay2, root, "\\_SB.PCI0.IDE0.PRIM.SLAV", /* A3x, R32 */ IBM_HANDLE(bay2_ej, bay2, "_EJ3", /* 600e/x, 770e, A3x */ "_EJ0", /* 770x */ ); /* all others */ +#endif /* don't list other alternatives as we install a notify handler on the 570 */ IBM_HANDLE(pci, root, "\\_SB.PCI"); /* 570 */ @@ -203,7 +196,7 @@ IBM_HANDLE(led, ec, "SLED", /* 570 */ IBM_HANDLE(beep, ec, "BEEP"); /* all except R30, R31 */ IBM_HANDLE(ecrd, ec, "ECRD"); /* 570 */ IBM_HANDLE(ecwr, ec, "ECWR"); /* 570 */ -IBM_HANDLE(fans, ec, "FANS"); /* X31, X40 */ +IBM_HANDLE(fans, ec, "FANS"); /* X31, X40, X41 */ IBM_HANDLE(gfan, ec, "GFAN", /* 570 */ "\\FSPD", /* 600e/x, 770e, 770x */ @@ -216,6 +209,152 @@ IBM_HANDLE(sfan, ec, "SFAN", /* 570 */ #define IBM_HKEY_HID "IBM0068" #define IBM_PCI_HID "PNP0A03" +enum thermal_access_mode { + IBMACPI_THERMAL_NONE = 0, /* No thermal support */ + IBMACPI_THERMAL_ACPI_TMP07, /* Use ACPI TMP0-7 */ + IBMACPI_THERMAL_ACPI_UPDT, /* Use ACPI TMP0-7 with UPDT */ + IBMACPI_THERMAL_TPEC_8, /* Use ACPI EC regs, 8 sensors */ + IBMACPI_THERMAL_TPEC_16, /* Use ACPI EC regs, 16 sensors */ +}; + +#define IBMACPI_MAX_THERMAL_SENSORS 16 /* Max thermal sensors supported */ +struct ibm_thermal_sensors_struct { + s32 temp[IBMACPI_MAX_THERMAL_SENSORS]; +}; + +/* + * FAN ACCESS MODES + * + * IBMACPI_FAN_RD_ACPI_GFAN: + * ACPI GFAN method: returns fan level + * + * see IBMACPI_FAN_WR_ACPI_SFAN + * EC 0x2f not available if GFAN exists + * + * IBMACPI_FAN_WR_ACPI_SFAN: + * ACPI SFAN method: sets fan level, 0 (stop) to 7 (max) + * + * EC 0x2f might be available *for reading*, but never for writing. + * + * IBMACPI_FAN_WR_TPEC: + * ThinkPad EC register 0x2f (HFSP): fan control loop mode Supported + * on almost all ThinkPads + * + * Fan speed changes of any sort (including those caused by the + * disengaged mode) are usually done slowly by the firmware as the + * maximum ammount of fan duty cycle change per second seems to be + * limited. + * + * Reading is not available if GFAN exists. + * Writing is not available if SFAN exists. + * + * Bits + * 7 automatic mode engaged; + * (default operation mode of the ThinkPad) + * fan level is ignored in this mode. + * 6 disengage mode (takes precedence over bit 7); + * not available on all thinkpads. May disable + * the tachometer, and speeds up fan to 100% duty-cycle, + * which speeds it up far above the standard RPM + * levels. It is not impossible that it could cause + * hardware damage. + * 5-3 unused in some models. Extra bits for fan level + * in others, but still useless as all values above + * 7 map to the same speed as level 7 in these models. + * 2-0 fan level (0..7 usually) + * 0x00 = stop + * 0x07 = max (set when temperatures critical) + * Some ThinkPads may have other levels, see + * IBMACPI_FAN_WR_ACPI_FANS (X31/X40/X41) + * + * FIRMWARE BUG: on some models, EC 0x2f might not be initialized at + * boot. Apparently the EC does not intialize it, so unless ACPI DSDT + * does so, its initial value is meaningless (0x07). + * + * For firmware bugs, refer to: + * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues + * + * ---- + * + * ThinkPad EC register 0x84 (LSB), 0x85 (MSB): + * Main fan tachometer reading (in RPM) + * + * This register is present on all ThinkPads with a new-style EC, and + * it is known not to be present on the A21m/e, and T22, as there is + * something else in offset 0x84 according to the ACPI DSDT. Other + * ThinkPads from this same time period (and earlier) probably lack the + * tachometer as well. + * + * Unfortunately a lot of ThinkPads with new-style ECs but whose firwmare + * was never fixed by IBM to report the EC firmware version string + * probably support the tachometer (like the early X models), so + * detecting it is quite hard. We need more data to know for sure. + * + * FIRMWARE BUG: always read 0x84 first, otherwise incorrect readings + * might result. + * + * FIRMWARE BUG: when EC 0x2f bit 6 is set (disengaged mode), this + * register is not invalidated in ThinkPads that disable tachometer + * readings. Thus, the tachometer readings go stale. + * + * For firmware bugs, refer to: + * http://thinkwiki.org/wiki/Embedded_Controller_Firmware#Firmware_Issues + * + * IBMACPI_FAN_WR_ACPI_FANS: + * ThinkPad X31, X40, X41. Not available in the X60. + * + * FANS ACPI handle: takes three arguments: low speed, medium speed, + * high speed. ACPI DSDT seems to map these three speeds to levels + * as follows: STOP LOW LOW MED MED HIGH HIGH HIGH HIGH + * (this map is stored on FAN0..FAN8 as "0,1,1,2,2,3,3,3,3") + * + * The speeds are stored on handles + * (FANA:FAN9), (FANC:FANB), (FANE:FAND). + * + * There are three default speed sets, acessible as handles: + * FS1L,FS1M,FS1H; FS2L,FS2M,FS2H; FS3L,FS3M,FS3H + * + * ACPI DSDT switches which set is in use depending on various + * factors. + * + * IBMACPI_FAN_WR_TPEC is also available and should be used to + * command the fan. The X31/X40/X41 seems to have 8 fan levels, + * but the ACPI tables just mention level 7. + */ + +enum fan_status_access_mode { + IBMACPI_FAN_NONE = 0, /* No fan status or control */ + IBMACPI_FAN_RD_ACPI_GFAN, /* Use ACPI GFAN */ + IBMACPI_FAN_RD_TPEC, /* Use ACPI EC regs 0x2f, 0x84-0x85 */ +}; + +enum fan_control_access_mode { + IBMACPI_FAN_WR_NONE = 0, /* No fan control */ + IBMACPI_FAN_WR_ACPI_SFAN, /* Use ACPI SFAN */ + IBMACPI_FAN_WR_TPEC, /* Use ACPI EC reg 0x2f */ + IBMACPI_FAN_WR_ACPI_FANS, /* Use ACPI FANS and EC reg 0x2f */ +}; + +enum fan_control_commands { + IBMACPI_FAN_CMD_SPEED = 0x0001, /* speed command */ + IBMACPI_FAN_CMD_LEVEL = 0x0002, /* level command */ + IBMACPI_FAN_CMD_ENABLE = 0x0004, /* enable/disable cmd, + * and also watchdog cmd */ +}; + +enum { /* Fan control constants */ + fan_status_offset = 0x2f, /* EC register 0x2f */ + fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM) + * 0x84 must be read before 0x85 */ + + IBMACPI_FAN_EC_DISENGAGED = 0x40, /* EC mode: tachometer + * disengaged */ + IBMACPI_FAN_EC_AUTO = 0x80, /* EC mode: auto fan + * control */ +}; + +static char *ibm_thinkpad_ec_found = NULL; + struct ibm_struct { char *name; char param[32]; @@ -243,6 +382,8 @@ struct ibm_struct { static struct proc_dir_entry *proc_dir = NULL; +static struct backlight_device *ibm_backlight_device = NULL; + #define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off") #define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled") #define strlencmp(a,b) (strncmp((a), (b), strlen(b))) @@ -581,8 +722,7 @@ static int wan_status(void) { int status; - if (!wan_supported || - !acpi_evalf(hkey_handle, &status, "GWAN", "d")) + if (!wan_supported || !acpi_evalf(hkey_handle, &status, "GWAN", "d")) status = 0; return status; @@ -630,12 +770,15 @@ static int wan_write(char *buf) return 0; } -static int video_supported; -static int video_orig_autosw; +enum video_access_mode { + IBMACPI_VIDEO_NONE = 0, + IBMACPI_VIDEO_570, /* 570 */ + IBMACPI_VIDEO_770, /* 600e/x, 770e, 770x */ + IBMACPI_VIDEO_NEW, /* all others */ +}; -#define VIDEO_570 1 -#define VIDEO_770 2 -#define VIDEO_NEW 3 +static enum video_access_mode video_supported; +static int video_orig_autosw; static int video_init(void) { @@ -647,16 +790,16 @@ static int video_init(void) if (!vid_handle) /* video switching not supported on R30, R31 */ - video_supported = 0; + video_supported = IBMACPI_VIDEO_NONE; else if (acpi_evalf(vid_handle, &video_orig_autosw, "SWIT", "qd")) /* 570 */ - video_supported = VIDEO_570; + video_supported = IBMACPI_VIDEO_570; else if (acpi_evalf(vid_handle, &video_orig_autosw, "^VADL", "qd")) /* 600e/x, 770e, 770x */ - video_supported = VIDEO_770; + video_supported = IBMACPI_VIDEO_770; else /* all others */ - video_supported = VIDEO_NEW; + video_supported = IBMACPI_VIDEO_NEW; return 0; } @@ -666,15 +809,15 @@ static int video_status(void) int status = 0; int i; - if (video_supported == VIDEO_570) { + if (video_supported == IBMACPI_VIDEO_570) { if (acpi_evalf(NULL, &i, "\\_SB.PHS", "dd", 0x87)) status = i & 3; - } else if (video_supported == VIDEO_770) { + } else if (video_supported == IBMACPI_VIDEO_770) { if (acpi_evalf(NULL, &i, "\\VCDL", "d")) status |= 0x01 * i; if (acpi_evalf(NULL, &i, "\\VCDC", "d")) status |= 0x02 * i; - } else if (video_supported == VIDEO_NEW) { + } else if (video_supported == IBMACPI_VIDEO_NEW) { acpi_evalf(NULL, NULL, "\\VUPS", "vd", 1); if (acpi_evalf(NULL, &i, "\\VCDC", "d")) status |= 0x02 * i; @@ -693,9 +836,10 @@ static int video_autosw(void) { int autosw = 0; - if (video_supported == VIDEO_570) + if (video_supported == IBMACPI_VIDEO_570) acpi_evalf(vid_handle, &autosw, "SWIT", "d"); - else if (video_supported == VIDEO_770 || video_supported == VIDEO_NEW) + else if (video_supported == IBMACPI_VIDEO_770 || + video_supported == IBMACPI_VIDEO_NEW) acpi_evalf(vid_handle, &autosw, "^VDEE", "d"); return autosw & 1; @@ -715,12 +859,12 @@ static int video_read(char *p) len += sprintf(p + len, "status:\t\tsupported\n"); len += sprintf(p + len, "lcd:\t\t%s\n", enabled(status, 0)); len += sprintf(p + len, "crt:\t\t%s\n", enabled(status, 1)); - if (video_supported == VIDEO_NEW) + if (video_supported == IBMACPI_VIDEO_NEW) len += sprintf(p + len, "dvi:\t\t%s\n", enabled(status, 3)); len += sprintf(p + len, "auto:\t\t%s\n", enabled(autosw, 0)); len += sprintf(p + len, "commands:\tlcd_enable, lcd_disable\n"); len += sprintf(p + len, "commands:\tcrt_enable, crt_disable\n"); - if (video_supported == VIDEO_NEW) + if (video_supported == IBMACPI_VIDEO_NEW) len += sprintf(p + len, "commands:\tdvi_enable, dvi_disable\n"); len += sprintf(p + len, "commands:\tauto_enable, auto_disable\n"); len += sprintf(p + len, "commands:\tvideo_switch, expand_toggle\n"); @@ -735,7 +879,7 @@ static int video_switch(void) if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 1)) return -EIO; - ret = video_supported == VIDEO_570 ? + ret = video_supported == IBMACPI_VIDEO_570 ? acpi_evalf(ec_handle, NULL, "_Q16", "v") : acpi_evalf(vid_handle, NULL, "VSWT", "v"); acpi_evalf(vid_handle, NULL, "_DOS", "vd", autosw); @@ -745,9 +889,9 @@ static int video_switch(void) static int video_expand(void) { - if (video_supported == VIDEO_570) + if (video_supported == IBMACPI_VIDEO_570) return acpi_evalf(ec_handle, NULL, "_Q17", "v"); - else if (video_supported == VIDEO_770) + else if (video_supported == IBMACPI_VIDEO_770) return acpi_evalf(vid_handle, NULL, "VEXP", "v"); else return acpi_evalf(NULL, NULL, "\\VEXP", "v"); @@ -757,10 +901,10 @@ static int video_switch2(int status) { int ret; - if (video_supported == VIDEO_570) { + if (video_supported == IBMACPI_VIDEO_570) { ret = acpi_evalf(NULL, NULL, "\\_SB.PHS2", "vdd", 0x8b, status | 0x80); - } else if (video_supported == VIDEO_770) { + } else if (video_supported == IBMACPI_VIDEO_770) { int autosw = video_autosw(); if (!acpi_evalf(vid_handle, NULL, "_DOS", "vd", 1)) return -EIO; @@ -796,10 +940,10 @@ static int video_write(char *buf) enable |= 0x02; } else if (strlencmp(cmd, "crt_disable") == 0) { disable |= 0x02; - } else if (video_supported == VIDEO_NEW && + } else if (video_supported == IBMACPI_VIDEO_NEW && strlencmp(cmd, "dvi_enable") == 0) { enable |= 0x08; - } else if (video_supported == VIDEO_NEW && + } else if (video_supported == IBMACPI_VIDEO_NEW && strlencmp(cmd, "dvi_disable") == 0) { disable |= 0x08; } else if (strlencmp(cmd, "auto_enable") == 0) { @@ -898,6 +1042,7 @@ static int light_write(char *buf) return 0; } +#if defined(CONFIG_ACPI_IBM_DOCK) || defined(CONFIG_ACPI_IBM_BAY) static int _sta(acpi_handle handle) { int status; @@ -907,6 +1052,7 @@ static int _sta(acpi_handle handle) return status; } +#endif #ifdef CONFIG_ACPI_IBM_DOCK #define dock_docked() (_sta(dock_handle) & 1) @@ -972,6 +1118,7 @@ static void dock_notify(struct ibm_struct *ibm, u32 event) } #endif +#ifdef CONFIG_ACPI_IBM_BAY static int bay_status_supported; static int bay_status2_supported; static int bay_eject_supported; @@ -1047,6 +1194,7 @@ static void bay_notify(struct ibm_struct *ibm, u32 event) { acpi_bus_generate_event(ibm->device, event, 0); } +#endif static int cmos_read(char *p) { @@ -1094,26 +1242,28 @@ static int cmos_write(char *buf) return 0; } -static int led_supported; - -#define LED_570 1 -#define LED_OLD 2 -#define LED_NEW 3 +enum led_access_mode { + IBMACPI_LED_NONE = 0, + IBMACPI_LED_570, /* 570 */ + IBMACPI_LED_OLD, /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ + IBMACPI_LED_NEW, /* all others */ +}; +static enum led_access_mode led_supported; static int led_init(void) { if (!led_handle) /* led not supported on R30, R31 */ - led_supported = 0; + led_supported = IBMACPI_LED_NONE; else if (strlencmp(led_path, "SLED") == 0) /* 570 */ - led_supported = LED_570; + led_supported = IBMACPI_LED_570; else if (strlencmp(led_path, "SYSL") == 0) /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */ - led_supported = LED_OLD; + led_supported = IBMACPI_LED_OLD; else /* all others */ - led_supported = LED_NEW; + led_supported = IBMACPI_LED_NEW; return 0; } @@ -1130,7 +1280,7 @@ static int led_read(char *p) } len += sprintf(p + len, "status:\t\tsupported\n"); - if (led_supported == LED_570) { + if (led_supported == IBMACPI_LED_570) { /* 570 */ int i, status; for (i = 0; i < 8; i++) { @@ -1179,13 +1329,13 @@ static int led_write(char *buf) } else return -EINVAL; - if (led_supported == LED_570) { + if (led_supported == IBMACPI_LED_570) { /* 570 */ led = 1 << led; if (!acpi_evalf(led_handle, NULL, NULL, "vdd", led, led_sled_arg1[ind])) return -EIO; - } else if (led_supported == LED_OLD) { + } else if (led_supported == IBMACPI_LED_OLD) { /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */ led = 1 << led; ret = ec_write(EC_HLMS, led); @@ -1272,50 +1422,142 @@ static int acpi_ec_write(int i, u8 v) return 1; } -static int thermal_tmp_supported; -static int thermal_updt_supported; +static enum thermal_access_mode thermal_read_mode; static int thermal_init(void) { - /* temperatures not supported on 570, G4x, R30, R31, R32 */ - thermal_tmp_supported = acpi_evalf(ec_handle, NULL, "TMP7", "qv"); + u8 t, ta1, ta2; + int i; + int acpi_tmp7 = acpi_evalf(ec_handle, NULL, "TMP7", "qv"); + + if (ibm_thinkpad_ec_found && experimental) { + /* + * Direct EC access mode: sensors at registers + * 0x78-0x7F, 0xC0-0xC7. Registers return 0x00 for + * non-implemented, thermal sensors return 0x80 when + * not available + */ - /* 600e/x, 770e, 770x */ - thermal_updt_supported = acpi_evalf(ec_handle, NULL, "UPDT", "qv"); + ta1 = ta2 = 0; + for (i = 0; i < 8; i++) { + if (likely(acpi_ec_read(0x78 + i, &t))) { + ta1 |= t; + } else { + ta1 = 0; + break; + } + if (likely(acpi_ec_read(0xC0 + i, &t))) { + ta2 |= t; + } else { + ta1 = 0; + break; + } + } + if (ta1 == 0) { + /* This is sheer paranoia, but we handle it anyway */ + if (acpi_tmp7) { + printk(IBM_ERR + "ThinkPad ACPI EC access misbehaving, " + "falling back to ACPI TMPx access mode\n"); + thermal_read_mode = IBMACPI_THERMAL_ACPI_TMP07; + } else { + printk(IBM_ERR + "ThinkPad ACPI EC access misbehaving, " + "disabling thermal sensors access\n"); + thermal_read_mode = IBMACPI_THERMAL_NONE; + } + } else { + thermal_read_mode = + (ta2 != 0) ? + IBMACPI_THERMAL_TPEC_16 : IBMACPI_THERMAL_TPEC_8; + } + } else if (acpi_tmp7) { + if (acpi_evalf(ec_handle, NULL, "UPDT", "qv")) { + /* 600e/x, 770e, 770x */ + thermal_read_mode = IBMACPI_THERMAL_ACPI_UPDT; + } else { + /* Standard ACPI TMPx access, max 8 sensors */ + thermal_read_mode = IBMACPI_THERMAL_ACPI_TMP07; + } + } else { + /* temperatures not supported on 570, G4x, R30, R31, R32 */ + thermal_read_mode = IBMACPI_THERMAL_NONE; + } return 0; } -static int thermal_read(char *p) +static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s) { - int len = 0; + int i, t; + s8 tmp; + char tmpi[] = "TMPi"; - if (!thermal_tmp_supported) - len += sprintf(p + len, "temperatures:\tnot supported\n"); - else { - int i, t; - char tmpi[] = "TMPi"; - s8 tmp[8]; + if (!s) + return -EINVAL; - if (thermal_updt_supported) - if (!acpi_evalf(ec_handle, NULL, "UPDT", "v")) + switch (thermal_read_mode) { +#if IBMACPI_MAX_THERMAL_SENSORS >= 16 + case IBMACPI_THERMAL_TPEC_16: + for (i = 0; i < 8; i++) { + if (!acpi_ec_read(0xC0 + i, &tmp)) + return -EIO; + s->temp[i + 8] = tmp * 1000; + } + /* fallthrough */ +#endif + case IBMACPI_THERMAL_TPEC_8: + for (i = 0; i < 8; i++) { + if (!acpi_ec_read(0x78 + i, &tmp)) return -EIO; + s->temp[i] = tmp * 1000; + } + return (thermal_read_mode == IBMACPI_THERMAL_TPEC_16) ? 16 : 8; + case IBMACPI_THERMAL_ACPI_UPDT: + if (!acpi_evalf(ec_handle, NULL, "UPDT", "v")) + return -EIO; for (i = 0; i < 8; i++) { tmpi[3] = '0' + i; if (!acpi_evalf(ec_handle, &t, tmpi, "d")) return -EIO; - if (thermal_updt_supported) - tmp[i] = (t - 2732 + 5) / 10; - else - tmp[i] = t; + s->temp[i] = (t - 2732) * 100; } + return 8; - len += sprintf(p + len, - "temperatures:\t%d %d %d %d %d %d %d %d\n", - tmp[0], tmp[1], tmp[2], tmp[3], - tmp[4], tmp[5], tmp[6], tmp[7]); + case IBMACPI_THERMAL_ACPI_TMP07: + for (i = 0; i < 8; i++) { + tmpi[3] = '0' + i; + if (!acpi_evalf(ec_handle, &t, tmpi, "d")) + return -EIO; + s->temp[i] = t * 1000; + } + return 8; + + case IBMACPI_THERMAL_NONE: + default: + return 0; } +} + +static int thermal_read(char *p) +{ + int len = 0; + int n, i; + struct ibm_thermal_sensors_struct t; + + n = thermal_get_sensors(&t); + if (unlikely(n < 0)) + return n; + + len += sprintf(p + len, "temperatures:\t"); + + if (n > 0) { + for (i = 0; i < (n - 1); i++) + len += sprintf(p + len, "%d ", t.temp[i] / 1000); + len += sprintf(p + len, "%d\n", t.temp[i] / 1000); + } else + len += sprintf(p + len, "not supported\n"); return len; } @@ -1381,12 +1623,23 @@ static int ecdump_write(char *buf) static int brightness_offset = 0x31; +static int brightness_get(struct backlight_device *bd) +{ + u8 level; + if (!acpi_ec_read(brightness_offset, &level)) + return -EIO; + + level &= 0x7; + + return level; +} + static int brightness_read(char *p) { int len = 0; - u8 level; + int level; - if (!acpi_ec_read(brightness_offset, &level)) { + if ((level = brightness_get(NULL)) < 0) { len += sprintf(p + len, "level:\t\tunreadable\n"); } else { len += sprintf(p + len, "level:\t\t%d\n", level & 0x7); @@ -1401,16 +1654,34 @@ static int brightness_read(char *p) #define BRIGHTNESS_UP 4 #define BRIGHTNESS_DOWN 5 -static int brightness_write(char *buf) +static int brightness_set(int value) { int cmos_cmd, inc, i; - u8 level; + int current_value = brightness_get(NULL); + + value &= 7; + + cmos_cmd = value > current_value ? BRIGHTNESS_UP : BRIGHTNESS_DOWN; + inc = value > current_value ? 1 : -1; + for (i = current_value; i != value; i += inc) { + if (!cmos_eval(cmos_cmd)) + return -EIO; + if (!acpi_ec_write(brightness_offset, i + inc)) + return -EIO; + } + + return 0; +} + +static int brightness_write(char *buf) +{ + int level; int new_level; char *cmd; while ((cmd = next_cmd(&buf))) { - if (!acpi_ec_read(brightness_offset, &level)) - return -EIO; + if ((level = brightness_get(NULL)) < 0) + return level; level &= 7; if (strlencmp(cmd, "up") == 0) { @@ -1423,19 +1694,44 @@ static int brightness_write(char *buf) } else return -EINVAL; - cmos_cmd = new_level > level ? BRIGHTNESS_UP : BRIGHTNESS_DOWN; - inc = new_level > level ? 1 : -1; - for (i = level; i != new_level; i += inc) { - if (!cmos_eval(cmos_cmd)) - return -EIO; - if (!acpi_ec_write(brightness_offset, i + inc)) - return -EIO; - } + brightness_set(new_level); } return 0; } +static int brightness_update_status(struct backlight_device *bd) +{ + return brightness_set(bd->props->brightness); +} + +static struct backlight_properties ibm_backlight_data = { + .owner = THIS_MODULE, + .get_brightness = brightness_get, + .update_status = brightness_update_status, + .max_brightness = 7, +}; + +static int brightness_init(void) +{ + ibm_backlight_device = backlight_device_register("ibm", NULL, + &ibm_backlight_data); + if (IS_ERR(ibm_backlight_device)) { + printk(IBM_ERR "Could not register backlight device\n"); + return PTR_ERR(ibm_backlight_device); + } + + return 0; +} + +static void brightness_exit(void) +{ + if (ibm_backlight_device) { + backlight_device_unregister(ibm_backlight_device); + ibm_backlight_device = NULL; + } +} + static int volume_offset = 0x30; static int volume_read(char *p) @@ -1522,86 +1818,482 @@ static int volume_write(char *buf) return 0; } -static int fan_status_offset = 0x2f; -static int fan_rpm_offset = 0x84; +static enum fan_status_access_mode fan_status_access_mode; +static enum fan_control_access_mode fan_control_access_mode; +static enum fan_control_commands fan_control_commands; -static int fan_read(char *p) +static int fan_control_status_known; +static u8 fan_control_initial_status; + +static void fan_watchdog_fire(void *ignored); +static int fan_watchdog_maxinterval; +static DECLARE_WORK(fan_watchdog_task, fan_watchdog_fire, NULL); + +static int fan_init(void) { - int len = 0; - int s; - u8 lo, hi, status; + fan_status_access_mode = IBMACPI_FAN_NONE; + fan_control_access_mode = IBMACPI_FAN_WR_NONE; + fan_control_commands = 0; + fan_control_status_known = 1; + fan_watchdog_maxinterval = 0; if (gfan_handle) { /* 570, 600e/x, 770e, 770x */ - if (!acpi_evalf(gfan_handle, &s, NULL, "d")) - return -EIO; + fan_status_access_mode = IBMACPI_FAN_RD_ACPI_GFAN; + } else { + /* all other ThinkPads: note that even old-style + * ThinkPad ECs supports the fan control register */ + if (likely(acpi_ec_read(fan_status_offset, + &fan_control_initial_status))) { + fan_status_access_mode = IBMACPI_FAN_RD_TPEC; + + /* In some ThinkPads, neither the EC nor the ACPI + * DSDT initialize the fan status, and it ends up + * being set to 0x07 when it *could* be either + * 0x07 or 0x80. + * + * Enable for TP-1Y (T43), TP-78 (R51e), + * TP-76 (R52), TP-70 (T43, R52), which are known + * to be buggy. */ + if (fan_control_initial_status == 0x07 && + ibm_thinkpad_ec_found && + ((ibm_thinkpad_ec_found[0] == '1' && + ibm_thinkpad_ec_found[1] == 'Y') || + (ibm_thinkpad_ec_found[0] == '7' && + (ibm_thinkpad_ec_found[1] == '6' || + ibm_thinkpad_ec_found[1] == '8' || + ibm_thinkpad_ec_found[1] == '0')) + )) { + printk(IBM_NOTICE + "fan_init: initial fan status is " + "unknown, assuming it is in auto " + "mode\n"); + fan_control_status_known = 0; + } + } else { + printk(IBM_ERR + "ThinkPad ACPI EC access misbehaving, " + "fan status and control unavailable\n"); + return 0; + } + } - len += sprintf(p + len, "level:\t\t%d\n", s); + if (sfan_handle) { + /* 570, 770x-JL */ + fan_control_access_mode = IBMACPI_FAN_WR_ACPI_SFAN; + fan_control_commands |= + IBMACPI_FAN_CMD_LEVEL | IBMACPI_FAN_CMD_ENABLE; } else { + if (!gfan_handle) { + /* gfan without sfan means no fan control */ + /* all other models implement TP EC 0x2f control */ + + if (fans_handle) { + /* X31, X40, X41 */ + fan_control_access_mode = + IBMACPI_FAN_WR_ACPI_FANS; + fan_control_commands |= + IBMACPI_FAN_CMD_SPEED | + IBMACPI_FAN_CMD_LEVEL | + IBMACPI_FAN_CMD_ENABLE; + } else { + fan_control_access_mode = IBMACPI_FAN_WR_TPEC; + fan_control_commands |= + IBMACPI_FAN_CMD_LEVEL | + IBMACPI_FAN_CMD_ENABLE; + } + } + } + + return 0; +} + +static int fan_get_status(u8 *status) +{ + u8 s; + + /* TODO: + * Add IBMACPI_FAN_RD_ACPI_FANS ? */ + + switch (fan_status_access_mode) { + case IBMACPI_FAN_RD_ACPI_GFAN: + /* 570, 600e/x, 770e, 770x */ + + if (unlikely(!acpi_evalf(gfan_handle, &s, NULL, "d"))) + return -EIO; + + if (likely(status)) + *status = s & 0x07; + + break; + + case IBMACPI_FAN_RD_TPEC: /* all except 570, 600e/x, 770e, 770x */ - if (!acpi_ec_read(fan_status_offset, &status)) - len += sprintf(p + len, "status:\t\tunreadable\n"); - else - len += sprintf(p + len, "status:\t\t%s\n", - enabled(status, 7)); + if (unlikely(!acpi_ec_read(fan_status_offset, &s))) + return -EIO; - if (!acpi_ec_read(fan_rpm_offset, &lo) || - !acpi_ec_read(fan_rpm_offset + 1, &hi)) - len += sprintf(p + len, "speed:\t\tunreadable\n"); - else - len += sprintf(p + len, "speed:\t\t%d\n", - (hi << 8) + lo); + if (likely(status)) + *status = s; + + break; + + default: + return -ENXIO; } - if (sfan_handle) - /* 570, 770x-JL */ - len += sprintf(p + len, "commands:\tlevel <level>" - " (<level> is 0-7)\n"); - if (!gfan_handle) + return 0; +} + +static int fan_get_speed(unsigned int *speed) +{ + u8 hi, lo; + + switch (fan_status_access_mode) { + case IBMACPI_FAN_RD_TPEC: /* all except 570, 600e/x, 770e, 770x */ - len += sprintf(p + len, "commands:\tenable, disable\n"); - if (fans_handle) - /* X31, X40 */ + if (unlikely(!acpi_ec_read(fan_rpm_offset, &lo) || + !acpi_ec_read(fan_rpm_offset + 1, &hi))) + return -EIO; + + if (likely(speed)) + *speed = (hi << 8) | lo; + + break; + + default: + return -ENXIO; + } + + return 0; +} + +static void fan_exit(void) +{ + cancel_delayed_work(&fan_watchdog_task); + flush_scheduled_work(); +} + +static void fan_watchdog_reset(void) +{ + static int fan_watchdog_active = 0; + + if (fan_watchdog_active) + cancel_delayed_work(&fan_watchdog_task); + + if (fan_watchdog_maxinterval > 0) { + fan_watchdog_active = 1; + if (!schedule_delayed_work(&fan_watchdog_task, + msecs_to_jiffies(fan_watchdog_maxinterval + * 1000))) { + printk(IBM_ERR "failed to schedule the fan watchdog, " + "watchdog will not trigger\n"); + } + } else + fan_watchdog_active = 0; +} + +static int fan_read(char *p) +{ + int len = 0; + int rc; + u8 status; + unsigned int speed = 0; + + switch (fan_status_access_mode) { + case IBMACPI_FAN_RD_ACPI_GFAN: + /* 570, 600e/x, 770e, 770x */ + if ((rc = fan_get_status(&status)) < 0) + return rc; + + len += sprintf(p + len, "status:\t\t%s\n" + "level:\t\t%d\n", + (status != 0) ? "enabled" : "disabled", status); + break; + + case IBMACPI_FAN_RD_TPEC: + /* all except 570, 600e/x, 770e, 770x */ + if ((rc = fan_get_status(&status)) < 0) + return rc; + + if (unlikely(!fan_control_status_known)) { + if (status != fan_control_initial_status) + fan_control_status_known = 1; + else + /* Return most likely status. In fact, it + * might be the only possible status */ + status = IBMACPI_FAN_EC_AUTO; + } + + len += sprintf(p + len, "status:\t\t%s\n", + (status != 0) ? "enabled" : "disabled"); + + /* No ThinkPad boots on disengaged mode, we can safely + * assume the tachometer is online if fan control status + * was unknown */ + if ((rc = fan_get_speed(&speed)) < 0) + return rc; + + len += sprintf(p + len, "speed:\t\t%d\n", speed); + + if (status & IBMACPI_FAN_EC_DISENGAGED) + /* Disengaged mode takes precedence */ + len += sprintf(p + len, "level:\t\tdisengaged\n"); + else if (status & IBMACPI_FAN_EC_AUTO) + len += sprintf(p + len, "level:\t\tauto\n"); + else + len += sprintf(p + len, "level:\t\t%d\n", status); + break; + + case IBMACPI_FAN_NONE: + default: + len += sprintf(p + len, "status:\t\tnot supported\n"); + } + + if (fan_control_commands & IBMACPI_FAN_CMD_LEVEL) { + len += sprintf(p + len, "commands:\tlevel <level>"); + + switch (fan_control_access_mode) { + case IBMACPI_FAN_WR_ACPI_SFAN: + len += sprintf(p + len, " (<level> is 0-7)\n"); + break; + + default: + len += sprintf(p + len, " (<level> is 0-7, " + "auto, disengaged)\n"); + break; + } + } + + if (fan_control_commands & IBMACPI_FAN_CMD_ENABLE) + len += sprintf(p + len, "commands:\tenable, disable\n" + "commands:\twatchdog <timeout> (<timeout> is 0 (off), " + "1-120 (seconds))\n"); + + if (fan_control_commands & IBMACPI_FAN_CMD_SPEED) len += sprintf(p + len, "commands:\tspeed <speed>" " (<speed> is 0-65535)\n"); return len; } -static int fan_write(char *buf) +static int fan_set_level(int level) { - char *cmd; - int level, speed; - - while ((cmd = next_cmd(&buf))) { - if (sfan_handle && - sscanf(cmd, "level %d", &level) == 1 && - level >= 0 && level <= 7) { - /* 570, 770x-JL */ + switch (fan_control_access_mode) { + case IBMACPI_FAN_WR_ACPI_SFAN: + if (level >= 0 && level <= 7) { if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", level)) return -EIO; - } else if (!gfan_handle && strlencmp(cmd, "enable") == 0) { - /* all except 570, 600e/x, 770e, 770x */ - if (!acpi_ec_write(fan_status_offset, 0x80)) - return -EIO; - } else if (!gfan_handle && strlencmp(cmd, "disable") == 0) { - /* all except 570, 600e/x, 770e, 770x */ - if (!acpi_ec_write(fan_status_offset, 0x00)) - return -EIO; - } else if (fans_handle && - sscanf(cmd, "speed %d", &speed) == 1 && - speed >= 0 && speed <= 65535) { - /* X31, X40 */ + } else + return -EINVAL; + break; + + case IBMACPI_FAN_WR_ACPI_FANS: + case IBMACPI_FAN_WR_TPEC: + if ((level != IBMACPI_FAN_EC_AUTO) && + (level != IBMACPI_FAN_EC_DISENGAGED) && + ((level < 0) || (level > 7))) + return -EINVAL; + + if (!acpi_ec_write(fan_status_offset, level)) + return -EIO; + else + fan_control_status_known = 1; + break; + + default: + return -ENXIO; + } + return 0; +} + +static int fan_set_enable(void) +{ + u8 s; + int rc; + + switch (fan_control_access_mode) { + case IBMACPI_FAN_WR_ACPI_FANS: + case IBMACPI_FAN_WR_TPEC: + if ((rc = fan_get_status(&s)) < 0) + return rc; + + /* Don't go out of emergency fan mode */ + if (s != 7) + s = IBMACPI_FAN_EC_AUTO; + + if (!acpi_ec_write(fan_status_offset, s)) + return -EIO; + else + fan_control_status_known = 1; + break; + + case IBMACPI_FAN_WR_ACPI_SFAN: + if ((rc = fan_get_status(&s)) < 0) + return rc; + + s &= 0x07; + + /* Set fan to at least level 4 */ + if (s < 4) + s = 4; + + if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", s)) + return -EIO; + break; + + default: + return -ENXIO; + } + return 0; +} + +static int fan_set_disable(void) +{ + switch (fan_control_access_mode) { + case IBMACPI_FAN_WR_ACPI_FANS: + case IBMACPI_FAN_WR_TPEC: + if (!acpi_ec_write(fan_status_offset, 0x00)) + return -EIO; + else + fan_control_status_known = 1; + break; + + case IBMACPI_FAN_WR_ACPI_SFAN: + if (!acpi_evalf(sfan_handle, NULL, NULL, "vd", 0x00)) + return -EIO; + break; + + default: + return -ENXIO; + } + return 0; +} + +static int fan_set_speed(int speed) +{ + switch (fan_control_access_mode) { + case IBMACPI_FAN_WR_ACPI_FANS: + if (speed >= 0 && speed <= 65535) { if (!acpi_evalf(fans_handle, NULL, NULL, "vddd", speed, speed, speed)) return -EIO; } else return -EINVAL; - } + break; + default: + return -ENXIO; + } return 0; } +static int fan_write_cmd_level(const char *cmd, int *rc) +{ + int level; + + if (strlencmp(cmd, "level auto") == 0) + level = IBMACPI_FAN_EC_AUTO; + else if (strlencmp(cmd, "level disengaged") == 0) + level = IBMACPI_FAN_EC_DISENGAGED; + else if (sscanf(cmd, "level %d", &level) != 1) + return 0; + + if ((*rc = fan_set_level(level)) == -ENXIO) + printk(IBM_ERR "level command accepted for unsupported " + "access mode %d", fan_control_access_mode); + + return 1; +} + +static int fan_write_cmd_enable(const char *cmd, int *rc) +{ + if (strlencmp(cmd, "enable") != 0) + return 0; + + if ((*rc = fan_set_enable()) == -ENXIO) + printk(IBM_ERR "enable command accepted for unsupported " + "access mode %d", fan_control_access_mode); + + return 1; +} + +static int fan_write_cmd_disable(const char *cmd, int *rc) +{ + if (strlencmp(cmd, "disable") != 0) + return 0; + + if ((*rc = fan_set_disable()) == -ENXIO) + printk(IBM_ERR "disable command accepted for unsupported " + "access mode %d", fan_control_access_mode); + + return 1; +} + +static int fan_write_cmd_speed(const char *cmd, int *rc) +{ + int speed; + + /* TODO: + * Support speed <low> <medium> <high> ? */ + + if (sscanf(cmd, "speed %d", &speed) != 1) + return 0; + + if ((*rc = fan_set_speed(speed)) == -ENXIO) + printk(IBM_ERR "speed command accepted for unsupported " + "access mode %d", fan_control_access_mode); + + return 1; +} + +static int fan_write_cmd_watchdog(const char *cmd, int *rc) +{ + int interval; + + if (sscanf(cmd, "watchdog %d", &interval) != 1) + return 0; + + if (interval < 0 || interval > 120) + *rc = -EINVAL; + else + fan_watchdog_maxinterval = interval; + + return 1; +} + +static int fan_write(char *buf) +{ + char *cmd; + int rc = 0; + + while (!rc && (cmd = next_cmd(&buf))) { + if (!((fan_control_commands & IBMACPI_FAN_CMD_LEVEL) && + fan_write_cmd_level(cmd, &rc)) && + !((fan_control_commands & IBMACPI_FAN_CMD_ENABLE) && + (fan_write_cmd_enable(cmd, &rc) || + fan_write_cmd_disable(cmd, &rc) || + fan_write_cmd_watchdog(cmd, &rc))) && + !((fan_control_commands & IBMACPI_FAN_CMD_SPEED) && + fan_write_cmd_speed(cmd, &rc)) + ) + rc = -EINVAL; + else if (!rc) + fan_watchdog_reset(); + } + + return rc; +} + +static void fan_watchdog_fire(void *ignored) +{ + printk(IBM_NOTICE "fan watchdog: enabling fan\n"); + if (fan_set_enable()) { + printk(IBM_ERR "fan watchdog: error while enabling fan\n"); + /* reschedule for later */ + fan_watchdog_reset(); + } +} + static struct ibm_struct ibms[] = { { .name = "driver", @@ -1662,6 +2354,7 @@ static struct ibm_struct ibms[] = { .type = ACPI_SYSTEM_NOTIFY, }, #endif +#ifdef CONFIG_ACPI_IBM_BAY { .name = "bay", .init = bay_init, @@ -1671,6 +2364,7 @@ static struct ibm_struct ibms[] = { .handle = &bay_handle, .type = ACPI_SYSTEM_NOTIFY, }, +#endif { .name = "cmos", .read = cmos_read, @@ -1702,6 +2396,8 @@ static struct ibm_struct ibms[] = { .name = "brightness", .read = brightness_read, .write = brightness_write, + .init = brightness_init, + .exit = brightness_exit, }, { .name = "volume", @@ -1712,6 +2408,8 @@ static struct ibm_struct ibms[] = { .name = "fan", .read = fan_read, .write = fan_write, + .init = fan_init, + .exit = fan_exit, .experimental = 1, }, }; @@ -1825,7 +2523,7 @@ static int __init register_driver(struct ibm_struct *ibm) } memset(ibm->driver, 0, sizeof(struct acpi_driver)); - sprintf(ibm->driver->name, "%s/%s", IBM_NAME, ibm->name); + sprintf(ibm->driver->name, "%s_%s", IBM_NAME, ibm->name); ibm->driver->ids = ibm->hid; ibm->driver->ops.add = &ibm_device_add; @@ -1954,7 +2652,9 @@ IBM_PARAM(light); #ifdef CONFIG_ACPI_IBM_DOCK IBM_PARAM(dock); #endif +#ifdef CONFIG_ACPI_IBM_BAY IBM_PARAM(bay); +#endif IBM_PARAM(cmos); IBM_PARAM(led); IBM_PARAM(beep); @@ -1971,6 +2671,33 @@ static void acpi_ibm_exit(void) ibm_exit(&ibms[i]); remove_proc_entry(IBM_DIR, acpi_root_dir); + + if (ibm_thinkpad_ec_found) + kfree(ibm_thinkpad_ec_found); +} + +static char* __init check_dmi_for_ec(void) +{ + struct dmi_device *dev = NULL; + char ec_fw_string[18]; + + /* + * ThinkPad T23 or newer, A31 or newer, R50e or newer, + * X32 or newer, all Z series; Some models must have an + * up-to-date BIOS or they will not be detected. + * + * See http://thinkwiki.org/wiki/List_of_DMI_IDs + */ + while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, NULL, dev))) { + if (sscanf(dev->name, + "IBM ThinkPad Embedded Controller -[%17c", + ec_fw_string) == 1) { + ec_fw_string[sizeof(ec_fw_string) - 1] = 0; + ec_fw_string[strcspn(ec_fw_string, " ]")] = 0; + return kstrdup(ec_fw_string, GFP_KERNEL); + } + } + return NULL; } static int __init acpi_ibm_init(void) @@ -1992,6 +2719,12 @@ static int __init acpi_ibm_init(void) return -ENODEV; } + /* Models with newer firmware report the EC in DMI */ + ibm_thinkpad_ec_found = check_dmi_for_ec(); + if (ibm_thinkpad_ec_found) + printk(IBM_INFO "ThinkPad EC firmware %s\n", + ibm_thinkpad_ec_found); + /* these handles are not required */ IBM_HANDLE_INIT(vid); IBM_HANDLE_INIT(vid2); @@ -2004,12 +2737,14 @@ static int __init acpi_ibm_init(void) IBM_HANDLE_INIT(dock); #endif IBM_HANDLE_INIT(pci); +#ifdef CONFIG_ACPI_IBM_BAY IBM_HANDLE_INIT(bay); if (bay_handle) IBM_HANDLE_INIT(bay_ej); IBM_HANDLE_INIT(bay2); if (bay2_handle) IBM_HANDLE_INIT(bay2_ej); +#endif IBM_HANDLE_INIT(beep); IBM_HANDLE_INIT(ecrd); IBM_HANDLE_INIT(ecwr); diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c index 7fe0b7ae9733..2f35f891593f 100644 --- a/drivers/acpi/toshiba_acpi.c +++ b/drivers/acpi/toshiba_acpi.c @@ -41,6 +41,8 @@ #include <linux/init.h> #include <linux/types.h> #include <linux/proc_fs.h> +#include <linux/backlight.h> + #include <asm/uaccess.h> #include <acpi/acpi_drivers.h> @@ -210,6 +212,7 @@ static acpi_status hci_read1(u32 reg, u32 * out1, u32 * result) } static struct proc_dir_entry *toshiba_proc_dir /*= 0*/ ; +static struct backlight_device *toshiba_backlight_device; static int force_fan; static int last_key_event; static int key_event_valid; @@ -271,14 +274,23 @@ dispatch_write(struct file *file, const char __user * buffer, return result; } -static char *read_lcd(char *p) +static int get_lcd(struct backlight_device *bd) { u32 hci_result; u32 value; hci_read1(HCI_LCD_BRIGHTNESS, &value, &hci_result); if (hci_result == HCI_SUCCESS) { - value = value >> HCI_LCD_BRIGHTNESS_SHIFT; + return (value >> HCI_LCD_BRIGHTNESS_SHIFT); + } else + return -EFAULT; +} + +static char *read_lcd(char *p) +{ + int value = get_lcd(NULL); + + if (value >= 0) { p += sprintf(p, "brightness: %d\n", value); p += sprintf(p, "brightness_levels: %d\n", HCI_LCD_BRIGHTNESS_LEVELS); @@ -289,22 +301,34 @@ static char *read_lcd(char *p) return p; } +static int set_lcd(int value) +{ + u32 hci_result; + + value = value << HCI_LCD_BRIGHTNESS_SHIFT; + hci_write1(HCI_LCD_BRIGHTNESS, value, &hci_result); + if (hci_result != HCI_SUCCESS) + return -EFAULT; + + return 0; +} + +static int set_lcd_status(struct backlight_device *bd) +{ + return set_lcd(bd->props->brightness); +} + static unsigned long write_lcd(const char *buffer, unsigned long count) { int value; - u32 hci_result; + int ret = count; if (sscanf(buffer, " brightness : %i", &value) == 1 && - value >= 0 && value < HCI_LCD_BRIGHTNESS_LEVELS) { - value = value << HCI_LCD_BRIGHTNESS_SHIFT; - hci_write1(HCI_LCD_BRIGHTNESS, value, &hci_result); - if (hci_result != HCI_SUCCESS) - return -EFAULT; - } else { - return -EINVAL; - } - - return count; + value >= 0 && value < HCI_LCD_BRIGHTNESS_LEVELS) + ret = set_lcd(value); + else + ret = -EINVAL; + return ret; } static char *read_video(char *p) @@ -506,6 +530,26 @@ static acpi_status __exit remove_device(void) return AE_OK; } +static struct backlight_properties toshiba_backlight_data = { + .owner = THIS_MODULE, + .get_brightness = get_lcd, + .update_status = set_lcd_status, + .max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1, +}; + +static void __exit toshiba_acpi_exit(void) +{ + if (toshiba_backlight_device) + backlight_device_unregister(toshiba_backlight_device); + + remove_device(); + + if (toshiba_proc_dir) + remove_proc_entry(PROC_TOSHIBA, acpi_root_dir); + + return; +} + static int __init toshiba_acpi_init(void) { acpi_status status = AE_OK; @@ -546,17 +590,15 @@ static int __init toshiba_acpi_init(void) remove_proc_entry(PROC_TOSHIBA, acpi_root_dir); } - return (ACPI_SUCCESS(status)) ? 0 : -ENODEV; -} - -static void __exit toshiba_acpi_exit(void) -{ - remove_device(); - - if (toshiba_proc_dir) - remove_proc_entry(PROC_TOSHIBA, acpi_root_dir); + toshiba_backlight_device = backlight_device_register("toshiba", NULL, + &toshiba_backlight_data); + if (IS_ERR(toshiba_backlight_device)) { + printk(KERN_ERR "Could not register toshiba backlight device\n"); + toshiba_backlight_device = NULL; + toshiba_acpi_exit(); + } - return; + return (ACPI_SUCCESS(status)) ? 0 : -ENODEV; } module_init(toshiba_acpi_init); |