diff options
Diffstat (limited to 'drivers/acpi/thermal.c')
| -rw-r--r-- | drivers/acpi/thermal.c | 67 |
1 files changed, 56 insertions, 11 deletions
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 1e06159fd9c4..bc6d5866ef98 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -77,23 +77,27 @@ MODULE_LICENSE("GPL"); static int act; module_param(act, int, 0644); -MODULE_PARM_DESC(act, "Disable or override all lowest active trip points.\n"); +MODULE_PARM_DESC(act, "Disable or override all lowest active trip points."); + +static int crt; +module_param(crt, int, 0644); +MODULE_PARM_DESC(crt, "Disable or lower all critical trip points."); static int tzp; module_param(tzp, int, 0444); -MODULE_PARM_DESC(tzp, "Thermal zone polling frequency, in 1/10 seconds.\n"); +MODULE_PARM_DESC(tzp, "Thermal zone polling frequency, in 1/10 seconds."); static int nocrt; module_param(nocrt, int, 0); -MODULE_PARM_DESC(nocrt, "Set to disable action on ACPI thermal zone critical and hot trips.\n"); +MODULE_PARM_DESC(nocrt, "Set to take no action upon ACPI thermal zone critical trips points."); static int off; module_param(off, int, 0); -MODULE_PARM_DESC(off, "Set to disable ACPI thermal support.\n"); +MODULE_PARM_DESC(off, "Set to disable ACPI thermal support."); static int psv; module_param(psv, int, 0644); -MODULE_PARM_DESC(psv, "Disable or override all passive trip points.\n"); +MODULE_PARM_DESC(psv, "Disable or override all passive trip points."); static int acpi_thermal_add(struct acpi_device *device); static int acpi_thermal_remove(struct acpi_device *device, int type); @@ -340,6 +344,20 @@ static int acpi_thermal_get_trip_points(struct acpi_thermal *tz) tz->trips.critical.temperature)); } + if (tz->trips.critical.flags.valid == 1) { + if (crt == -1) { + tz->trips.critical.flags.valid = 0; + } else if (crt > 0) { + unsigned long crt_k = CELSIUS_TO_KELVIN(crt); + + /* + * Allow override to lower critical threshold + */ + if (crt_k < tz->trips.critical.temperature) + tz->trips.critical.temperature = crt_k; + } + } + /* Critical Sleep (optional) */ status = @@ -485,8 +503,12 @@ static int acpi_thermal_critical(struct acpi_thermal *tz) printk(KERN_EMERG "Critical temperature reached (%ld C), shutting down.\n", KELVIN_TO_CELSIUS(tz->temperature)); - acpi_bus_generate_event(tz->device, ACPI_THERMAL_NOTIFY_CRITICAL, + acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_CRITICAL, tz->trips.critical.flags.enabled); + acpi_bus_generate_netlink_event(tz->device->pnp.device_class, + tz->device->dev.bus_id, + ACPI_THERMAL_NOTIFY_CRITICAL, + tz->trips.critical.flags.enabled); orderly_poweroff(true); @@ -504,8 +526,12 @@ static int acpi_thermal_hot(struct acpi_thermal *tz) } else if (tz->trips.hot.flags.enabled) tz->trips.hot.flags.enabled = 0; - acpi_bus_generate_event(tz->device, ACPI_THERMAL_NOTIFY_HOT, + acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_HOT, tz->trips.hot.flags.enabled); + acpi_bus_generate_netlink_event(tz->device->pnp.device_class, + tz->device->dev.bus_id, + ACPI_THERMAL_NOTIFY_HOT, + tz->trips.hot.flags.enabled); /* TBD: Call user-mode "sleep(S4)" function */ @@ -1067,9 +1093,9 @@ static int acpi_thermal_add_fs(struct acpi_device *device) entry->owner = THIS_MODULE; } - /* 'trip_points' [R/W] */ + /* 'trip_points' [R] */ entry = create_proc_entry(ACPI_THERMAL_FILE_TRIP_POINTS, - S_IFREG | S_IRUGO | S_IWUSR, + S_IRUGO, acpi_device_dir(device)); if (!entry) return -ENODEV; @@ -1149,12 +1175,16 @@ static void acpi_thermal_notify(acpi_handle handle, u32 event, void *data) case ACPI_THERMAL_NOTIFY_THRESHOLDS: acpi_thermal_get_trip_points(tz); acpi_thermal_check(tz); - acpi_bus_generate_event(device, event, 0); + acpi_bus_generate_proc_event(device, event, 0); + acpi_bus_generate_netlink_event(device->pnp.device_class, + device->dev.bus_id, event, 0); break; case ACPI_THERMAL_NOTIFY_DEVICES: if (tz->flags.devices) acpi_thermal_get_devices(tz); - acpi_bus_generate_event(device, event, 0); + acpi_bus_generate_proc_event(device, event, 0); + acpi_bus_generate_netlink_event(device->pnp.device_class, + device->dev.bus_id, event, 0); break; default: ACPI_DEBUG_PRINT((ACPI_DB_INFO, @@ -1339,6 +1369,13 @@ static int thermal_act(struct dmi_system_id *d) { } return 0; } +static int thermal_nocrt(struct dmi_system_id *d) { + + printk(KERN_NOTICE "ACPI: %s detected: " + "disabling all critical thermal trip point actions.\n", d->ident); + nocrt = 1; + return 0; +} static int thermal_tzp(struct dmi_system_id *d) { if (tzp == 0) { @@ -1387,6 +1424,14 @@ static struct dmi_system_id thermal_dmi_table[] __initdata = { DMI_MATCH(DMI_BOARD_NAME, "i915GMm-HFS"), }, }, + { + .callback = thermal_nocrt, + .ident = "Gigabyte GA-7ZX", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."), + DMI_MATCH(DMI_BOARD_NAME, "7ZX"), + }, + }, {} }; #endif /* CONFIG_DMI */ |