diff options
| -rw-r--r-- | Documentation/devicetree/bindings/pci/designware-pcie.txt | 17 | ||||
| -rw-r--r-- | MAINTAINERS | 7 | ||||
| -rw-r--r-- | arch/arc/Kconfig | 26 | ||||
| -rw-r--r-- | arch/arc/include/asm/dma.h | 5 | ||||
| -rw-r--r-- | arch/arc/include/asm/io.h | 9 | ||||
| -rw-r--r-- | arch/arc/include/asm/pci.h | 28 | ||||
| -rw-r--r-- | arch/arc/kernel/Makefile | 1 | ||||
| -rw-r--r-- | arch/arc/kernel/pcibios.c | 22 | ||||
| -rw-r--r-- | arch/arc/plat-axs10x/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/pci/Makefile | 1 | ||||
| -rw-r--r-- | drivers/pci/host/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/pci/host/Makefile | 1 | ||||
| -rw-r--r-- | drivers/pci/host/pci-dra7xx.c | 11 | ||||
| -rw-r--r-- | drivers/pci/host/pci-exynos.c | 13 | ||||
| -rw-r--r-- | drivers/pci/host/pci-imx6.c | 33 | ||||
| -rw-r--r-- | drivers/pci/host/pci-keystone.c | 10 | ||||
| -rw-r--r-- | drivers/pci/host/pcie-designware-plat.c | 138 | ||||
| -rw-r--r-- | drivers/pci/host/pcie-designware.c | 29 | ||||
| -rw-r--r-- | drivers/pci/host/pcie-designware.h | 6 | ||||
| -rw-r--r-- | drivers/pci/host/pcie-qcom.c | 12 | ||||
| -rw-r--r-- | drivers/pci/host/pcie-spear13xx.c | 14 |
21 files changed, 319 insertions, 77 deletions
diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt index 5b0853df9d5a..64f2fff12128 100644 --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt @@ -28,3 +28,20 @@ Optional properties: - clock-names: Must include the following entries: - "pcie" - "pcie_bus" + +Example configuration: + + pcie: pcie@0xdffff000 { + compatible = "snps,dw-pcie"; + reg = <0xdffff000 0x1000>, /* Controller registers */ + <0xd0000000 0x2000>; /* PCI config space */ + reg-names = "ctrlreg", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000 + 0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>; + interrupts = <25>, <24>; + #interrupt-cells = <1>; + num-lanes = <1>; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 1aa8f82837ea..b2122f7ea727 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8367,6 +8367,13 @@ L: linux-pci@vger.kernel.org S: Maintained F: drivers/pci/host/*designware* +PCI DRIVER FOR SYNOPSYS PROTOTYPING DEVICE +M: Joao Pinto <jpinto@synopsys.com> +L: linux-pci@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/pci/designware-pcie.txt +F: drivers/pci/host/pcie-designware-plat.c + PCI DRIVER FOR GENERIC OF HOSTS M: Will Deacon <will.deacon@arm.com> L: linux-pci@vger.kernel.org diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 76dde9db7934..f9e3b357af79 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -19,6 +19,7 @@ config ARC select GENERIC_FIND_FIRST_BIT # for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP select GENERIC_IRQ_SHOW + select GENERIC_PCI_IOMAP select GENERIC_PENDING_IRQ if SMP select GENERIC_SMP_IDLE_THREAD select HAVE_ARCH_KGDB @@ -39,6 +40,9 @@ config ARC select PERF_USE_VMALLOC select HAVE_DEBUG_STACKOVERFLOW +config MIGHT_HAVE_PCI + bool + config TRACE_IRQFLAGS_SUPPORT def_bool y @@ -568,6 +572,28 @@ endmenu # "ARC Architecture Configuration" source "mm/Kconfig" source "net/Kconfig" source "drivers/Kconfig" + +menu "Bus Support" + +config PCI + bool "PCI support" if MIGHT_HAVE_PCI + help + PCI is the name of a bus system, i.e., the way the CPU talks to + the other stuff inside your box. Find out if your board/platform + has PCI. + + Note: PCIe support for Synopsys Device will be available only + when HAPS DX is configured with PCIe RC bitmap. If you have PCI, + say Y, otherwise N. + +config PCI_SYSCALL + def_bool PCI + +source "drivers/pci/Kconfig" +source "drivers/pci/pcie/Kconfig" + +endmenu + source "fs/Kconfig" source "arch/arc/Kconfig.debug" source "security/Kconfig" diff --git a/arch/arc/include/asm/dma.h b/arch/arc/include/asm/dma.h index ca7c45181de9..01e47a69b034 100644 --- a/arch/arc/include/asm/dma.h +++ b/arch/arc/include/asm/dma.h @@ -10,5 +10,10 @@ #define ASM_ARC_DMA_H #define MAX_DMA_ADDRESS 0xC0000000 +#ifdef CONFIG_PCI +extern int isa_dma_bridge_buggy; +#else +#define isa_dma_bridge_buggy 0 +#endif #endif diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h index 694ece8a0243..947bf0cfdec0 100644 --- a/arch/arc/include/asm/io.h +++ b/arch/arc/include/asm/io.h @@ -16,6 +16,15 @@ extern void __iomem *ioremap(unsigned long physaddr, unsigned long size); extern void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size, unsigned long flags); +static inline void __iomem *ioport_map(unsigned long port, unsigned int nr) +{ + return (void __iomem *)port; +} + +static inline void ioport_unmap(void __iomem *addr) +{ +} + extern void iounmap(const void __iomem *addr); #define ioremap_nocache(phy, sz) ioremap(phy, sz) diff --git a/arch/arc/include/asm/pci.h b/arch/arc/include/asm/pci.h new file mode 100644 index 000000000000..ba56c23c1b20 --- /dev/null +++ b/arch/arc/include/asm/pci.h @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _ASM_ARC_PCI_H +#define _ASM_ARC_PCI_H + +#ifdef __KERNEL__ +#include <linux/ioport.h> + +#define PCIBIOS_MIN_IO 0x100 +#define PCIBIOS_MIN_MEM 0x100000 + +#define pcibios_assign_all_busses() 1 +/* + * The PCI address space does equal the physical memory address space. + * The networking and block device layers use this boolean for bounce + * buffer decisions. + */ +#define PCI_DMA_BUS_IS_PHYS 1 + +#endif /* __KERNEL__ */ + +#endif /* _ASM_ARC_PCI_H */ diff --git a/arch/arc/kernel/Makefile b/arch/arc/kernel/Makefile index e7f3625a19b5..1bc2036b19d7 100644 --- a/arch/arc/kernel/Makefile +++ b/arch/arc/kernel/Makefile @@ -12,6 +12,7 @@ obj-y := arcksyms.o setup.o irq.o time.o reset.o ptrace.o process.o devtree.o obj-y += signal.o traps.o sys.o troubleshoot.o stacktrace.o disasm.o clk.o obj-$(CONFIG_ISA_ARCOMPACT) += entry-compact.o intc-compact.o obj-$(CONFIG_ISA_ARCV2) += entry-arcv2.o intc-arcv2.o +obj-$(CONFIG_PCI) += pcibios.o obj-$(CONFIG_MODULES) += arcksyms.o module.o obj-$(CONFIG_SMP) += smp.o diff --git a/arch/arc/kernel/pcibios.c b/arch/arc/kernel/pcibios.c new file mode 100644 index 000000000000..72e1d73d0bd6 --- /dev/null +++ b/arch/arc/kernel/pcibios.c @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2014-2015 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/pci.h> + +/* + * We don't have to worry about legacy ISA devices, so nothing to do here + */ +resource_size_t pcibios_align_resource(void *data, const struct resource *res, + resource_size_t size, resource_size_t align) +{ + return res->start; +} + +void pcibios_fixup_bus(struct pci_bus *bus) +{ +} diff --git a/arch/arc/plat-axs10x/Kconfig b/arch/arc/plat-axs10x/Kconfig index d475f9d4847c..426ac4b8bb39 100644 --- a/arch/arc/plat-axs10x/Kconfig +++ b/arch/arc/plat-axs10x/Kconfig @@ -11,6 +11,7 @@ menuconfig ARC_PLAT_AXS10X select DW_APB_ICTL select GPIO_DWAPB select OF_GPIO + select MIGHT_HAVE_PCI select GENERIC_IRQ_CHIP select ARCH_REQUIRE_GPIOLIB help diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index be3f631c3f75..2154092ddee8 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -32,6 +32,7 @@ obj-$(CONFIG_PCI_IOV) += iov.o # Some architectures use the generic PCI setup functions # obj-$(CONFIG_ALPHA) += setup-irq.o +obj-$(CONFIG_ARC) += setup-irq.o obj-$(CONFIG_ARM) += setup-irq.o obj-$(CONFIG_ARM64) += setup-irq.o obj-$(CONFIG_UNICORE32) += setup-irq.o diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig index 4f8e951d7252..391623e516f0 100644 --- a/drivers/pci/host/Kconfig +++ b/drivers/pci/host/Kconfig @@ -16,6 +16,7 @@ config PCI_MVEBU depends on ARCH_MVEBU || ARCH_DOVE depends on OF + config PCIE_XILINX_NWL bool "NWL PCIe Core" depends on ARCH_ZYNQMP @@ -26,6 +27,17 @@ config PCIE_XILINX_NWL or End Point. The current option selection will only support root port enabling. +config PCIE_DW_PLAT + bool "Platform bus based DesignWare PCIe Controller" + select PCIE_DW + ---help--- + This selects the DesignWare PCIe controller support. Select this if + you have a PCIe controller on Platform bus. + + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + config PCIE_DW bool diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile index 2c7efd8e0762..3ccd743e20b9 100644 --- a/drivers/pci/host/Makefile +++ b/drivers/pci/host/Makefile @@ -1,4 +1,5 @@ obj-$(CONFIG_PCIE_DW) += pcie-designware.o +obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o obj-$(CONFIG_PCI_IMX6) += pci-imx6.o diff --git a/drivers/pci/host/pci-dra7xx.c b/drivers/pci/host/pci-dra7xx.c index 923607bdabc5..2ca3a1f30ebf 100644 --- a/drivers/pci/host/pci-dra7xx.c +++ b/drivers/pci/host/pci-dra7xx.c @@ -10,7 +10,6 @@ * published by the Free Software Foundation. */ -#include <linux/delay.h> #include <linux/err.h> #include <linux/interrupt.h> #include <linux/irq.h> @@ -108,7 +107,6 @@ static int dra7xx_pcie_establish_link(struct pcie_port *pp) { struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pp); u32 reg; - unsigned int retries; if (dw_pcie_link_up(pp)) { dev_err(pp->dev, "link is already up\n"); @@ -119,14 +117,7 @@ static int dra7xx_pcie_establish_link(struct pcie_port *pp) reg |= LTSSM_EN; dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_DEVICE_CMD, reg); - for (retries = 0; retries < 1000; retries++) { - if (dw_pcie_link_up(pp)) - return 0; - usleep_range(10, 20); - } - - dev_err(pp->dev, "link is not up\n"); - return -EINVAL; + return dw_pcie_wait_for_link(pp); } static void dra7xx_pcie_enable_interrupts(struct pcie_port *pp) diff --git a/drivers/pci/host/pci-exynos.c b/drivers/pci/host/pci-exynos.c index d997d22d4231..219976103efc 100644 --- a/drivers/pci/host/pci-exynos.c +++ b/drivers/pci/host/pci-exynos.c @@ -318,7 +318,6 @@ static int exynos_pcie_establish_link(struct pcie_port *pp) { struct exynos_pcie *exynos_pcie = to_exynos_pcie(pp); u32 val; - unsigned int retries; if (dw_pcie_link_up(pp)) { dev_err(pp->dev, "Link already up\n"); @@ -357,13 +356,8 @@ static int exynos_pcie_establish_link(struct pcie_port *pp) PCIE_APP_LTSSM_ENABLE); /* check if the link is up or not */ - for (retries = 0; retries < 10; retries++) { - if (dw_pcie_link_up(pp)) { - dev_info(pp->dev, "Link up\n"); - return 0; - } - mdelay(100); - } + if (!dw_pcie_wait_for_link(pp)) + return 0; while (exynos_phy_readl(exynos_pcie, PCIE_PHY_PLL_LOCKED) == 0) { val = exynos_blk_readl(exynos_pcie, PCIE_PHY_PLL_LOCKED); @@ -372,8 +366,7 @@ static int exynos_pcie_establish_link(struct pcie_port *pp) /* power off phy */ exynos_pcie_power_off_phy(pp); - dev_err(pp->dev, "PCIe Link Fail\n"); - return -EINVAL; + return -ETIMEDOUT; } static void exynos_pcie_clear_irq_pulse(struct pcie_port *pp) diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c index 8c9b3896d6f5..eb5a2755a164 100644 --- a/drivers/pci/host/pci-imx6.c +++ b/drivers/pci/host/pci-imx6.c @@ -357,33 +357,14 @@ static void imx6_pcie_init_phy(struct pcie_port *pp) static int imx6_pcie_wait_for_link(struct pcie_port *pp) { - unsigned int retries; + /* check if the link is up or not */ + if (!dw_pcie_wait_for_link(pp)) + return 0; - /* - * Test if the PHY reports that the link is up and also that the LTSSM - * training finished. There are three possible states of the link when - * this code is called: - * 1) The link is DOWN (unlikely) - * The link didn't come up yet for some reason. This usually means - * we have a real problem somewhere, if it happens with a peripheral - * connected. This state calls for inspection of the DEBUG registers. - * 2) The link is UP, but still in LTSSM training - * Wait for the training to finish, which should take a very short - * time. If the training does not finish, we have a problem and we - * need to inspect the DEBUG registers. If the training does finish, - * the link is up and operating correctly. - * 3) The link is UP and no longer in LTSSM training - * The link is up and operating correctly. - */ - for (retries = 0; retries < 200; retries++) { - u32 reg = readl(pp->dbi_base + PCIE_PHY_DEBUG_R1); - if ((reg & PCIE_PHY_DEBUG_R1_XMLH_LINK_UP) && - !(reg & PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING)) - return 0; - usleep_range(1000, 2000); - } - - return -EINVAL; + dev_dbg(pp->dev, "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n", + readl(pp->dbi_base + PCIE_PHY_DEBUG_R0), + readl(pp->dbi_base + PCIE_PHY_DEBUG_R1)); + return -ETIMEDOUT; } static int imx6_pcie_wait_for_speed_change(struct pcie_port *pp) diff --git a/drivers/pci/host/pci-keystone.c b/drivers/pci/host/pci-keystone.c index cd7034523f52..b71f55bb0315 100644 --- a/drivers/pci/host/pci-keystone.c +++ b/drivers/pci/host/pci-keystone.c @@ -97,17 +97,15 @@ static int ks_pcie_establish_link(struct keystone_pcie *ks_pcie) return 0; } - ks_dw_pcie_initiate_link_train(ks_pcie); /* check if the link is up or not */ - for (retries = 0; retries < 200; retries++) { - if (dw_pcie_link_up(pp)) - return 0; - usleep_range(100, 1000); + for (retries = 0; retries < 5; retries++) { ks_dw_pcie_initiate_link_train(ks_pcie); + if (!dw_pcie_wait_for_link(pp)) + return 0; } dev_err(pp->dev, "phy link never came up\n"); - return -EINVAL; + return -ETIMEDOUT; } static void ks_pcie_msi_irq_handler(struct irq_desc *desc) diff --git a/drivers/pci/host/pcie-designware-plat.c b/drivers/pci/host/pcie-designware-plat.c new file mode 100644 index 000000000000..b3500994d08a --- /dev/null +++ b/drivers/pci/host/pcie-designware-plat.c @@ -0,0 +1,138 @@ +/* + * PCIe RC driver for Synopsys DesignWare Core + * + * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com) + * + * Authors: Joao Pinto <jpinto@synopsys.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_gpio.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/resource.h> +#include <linux/signal.h> +#include <linux/types.h> + +#include "pcie-designware.h" + +struct dw_plat_pcie { + void __iomem *mem_base; + struct pcie_port pp; +}; + +static irqreturn_t dw_plat_pcie_msi_irq_handler(int irq, void *arg) +{ + struct pcie_port *pp = arg; + + return dw_handle_msi_irq(pp); +} + +static void dw_plat_pcie_host_init(struct pcie_port *pp) +{ + dw_pcie_setup_rc(pp); + dw_pcie_wait_for_link(pp); + + if (IS_ENABLED(CONFIG_PCI_MSI)) + dw_pcie_msi_init(pp); +} + +static struct pcie_host_ops dw_plat_pcie_host_ops = { + .host_init = dw_plat_pcie_host_init, +}; + +static int dw_plat_add_pcie_port(struct pcie_port *pp, + struct platform_device *pdev) +{ + int ret; + + pp->irq = platform_get_irq(pdev, 1); + if (pp->irq < 0) + return pp->irq; + + if (IS_ENABLED(CONFIG_PCI_MSI)) { + pp->msi_irq = platform_get_irq(pdev, 0); + if (pp->msi_irq < 0) + return pp->msi_irq; + + ret = devm_request_irq(&pdev->dev, pp->msi_irq, + dw_plat_pcie_msi_irq_handler, + IRQF_SHARED, "dw-plat-pcie-msi", pp); + if (ret) { + dev_err(&pdev->dev, "failed to request MSI IRQ\n"); + return ret; + } + } + + pp->root_bus_nr = -1; + pp->ops = &dw_plat_pcie_host_ops; + + ret = dw_pcie_host_init(pp); + if (ret) { + dev_err(&pdev->dev, "failed to initialize host\n"); + return ret; + } + + return 0; +} + +static int dw_plat_pcie_probe(struct platform_device *pdev) +{ + struct dw_plat_pcie *dw_plat_pcie; + struct pcie_port *pp; + struct resource *res; /* Resource from DT */ + int ret; + + dw_plat_pcie = devm_kzalloc(&pdev->dev, sizeof(*dw_plat_pcie), + GFP_KERNEL); + if (!dw_plat_pcie) + return -ENOMEM; + + pp = &dw_plat_pcie->pp; + pp->dev = &pdev->dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + + dw_plat_pcie->mem_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(dw_plat_pcie->mem_base)) + return PTR_ERR(dw_plat_pcie->mem_base); + + pp->dbi_base = dw_plat_pcie->mem_base; + + ret = dw_plat_add_pcie_port(pp, pdev); + if (ret < 0) + return ret; + + platform_set_drvdata(pdev, dw_plat_pcie); + return 0; +} + +static const struct of_device_id dw_plat_pcie_of_match[] = { + { .compatible = "snps,dw-pcie", }, + {}, +}; +MODULE_DEVICE_TABLE(of, dw_plat_pcie_of_match); + +static struct platform_driver dw_plat_pcie_driver = { + .driver = { + .name = "dw-pcie", + .of_match_table = dw_plat_pcie_of_match, + }, + .probe = dw_plat_pcie_probe, +}; + +module_platform_driver(dw_plat_pcie_driver); + +MODULE_AUTHOR("Joao Pinto <Joao.Pinto@synopsys.com>"); +MODULE_DESCRIPTION("Synopsys PCIe host controller glue platform driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c index f85f10d22049..a4cccd356304 100644 --- a/drivers/pci/host/pcie-designware.c +++ b/drivers/pci/host/pcie-designware.c @@ -22,6 +22,7 @@ #include <linux/pci_regs.h> #include <linux/platform_device.h> #include <linux/types.h> +#include <linux/delay.h> #include "pcie-designware.h" @@ -69,6 +70,11 @@ #define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16) #define PCIE_ATU_UPPER_TARGET 0x91C +/* PCIe Port Logic registers */ +#define PLR_OFFSET 0x700 +#define PCIE_PHY_DEBUG_R1 (PLR_OFFSET + 0x2c) +#define PCIE_PHY_DEBUG_R1_LINK_UP 0x00000010 + static struct pci_ops dw_pcie_ops; int dw_pcie_cfg_read(void __iomem *addr, int size, u32 *val) @@ -380,12 +386,33 @@ static struct msi_controller dw_pcie_msi_chip = { .teardown_irq = dw_msi_teardown_irq, }; +int dw_pcie_wait_for_link(struct pcie_port *pp) +{ + int retries; + + /* check if the link is up or not */ + for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) { + if (dw_pcie_link_up(pp)) { + dev_info(pp->dev, "link up\n"); + return 0; + } + usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX); + } + + dev_err(pp->dev, "phy link never came up\n"); + + return -ETIMEDOUT; +} + int dw_pcie_link_up(struct pcie_port *pp) { + u32 val; + if (pp->ops->link_up) return pp->ops->link_up(pp); - return 0; + val = readl(pp->dbi_base + PCIE_PHY_DEBUG_R1); + return val & PCIE_PHY_DEBUG_R1_LINK_UP; } static int dw_pcie_msi_map(struct irq_domain *domain, unsigned int irq, diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-designware.h index 2356d29e8527..f437f9b5be04 100644 --- a/drivers/pci/host/pcie-designware.h +++ b/drivers/pci/host/pcie-designware.h @@ -22,6 +22,11 @@ #define MAX_MSI_IRQS 32 #define MAX_MSI_CTRLS (MAX_MSI_IRQS / 32) +/* Parameters for the waiting for link up routine */ +#define LINK_WAIT_MAX_RETRIES 10 +#define LINK_WAIT_USLEEP_MIN 90000 +#define LINK_WAIT_USLEEP_MAX 100000 + struct pcie_port { struct device *dev; u8 root_bus_nr; @@ -76,6 +81,7 @@ int dw_pcie_cfg_read(void __iomem *addr, int size, u32 *val); int dw_pcie_cfg_write(void __iomem *addr, int size, u32 val); irqreturn_t dw_handle_msi_irq(struct pcie_port *pp); void dw_pcie_msi_init(struct pcie_port *pp); +int dw_pcie_wait_for_link(struct pcie_port *pp); int dw_pcie_link_up(struct pcie_port *pp); void dw_pcie_setup_rc(struct pcie_port *pp); int dw_pcie_host_init(struct pcie_port *pp); diff --git a/drivers/pci/host/pcie-qcom.c b/drivers/pci/host/pcie-qcom.c index e845fba19632..f2f90c50f75d 100644 --- a/drivers/pci/host/pcie-qcom.c +++ b/drivers/pci/host/pcie-qcom.c @@ -116,8 +116,6 @@ static irqreturn_t qcom_pcie_msi_irq_handler(int irq, void *arg) static int qcom_pcie_establish_link(struct qcom_pcie *pcie) { - struct device *dev = pcie->dev; - unsigned int retries = 0; u32 val; if (dw_pcie_link_up(&pcie->pp)) @@ -128,15 +126,7 @@ static int qcom_pcie_establish_link(struct qcom_pcie *pcie) val |= PCIE20_ELBI_SYS_CTRL_LT_ENABLE; writel(val, pcie->elbi + PCIE20_ELBI_SYS_CTRL); - do { - if (dw_pcie_link_up(&pcie->pp)) - return 0; - usleep_range(250, 1000); - } while (retries < 200); - - dev_warn(dev, "phy link never came up\n"); - - return -ETIMEDOUT; + return dw_pcie_wait_for_link(&pcie->pp); } static int qcom_pcie_get_resources_v0(struct qcom_pcie *pcie) diff --git a/drivers/pci/host/pcie-spear13xx.c b/drivers/pci/host/pcie-spear13xx.c index a6cd8233e8c0..a4060b85ab23 100644 --- a/drivers/pci/host/pcie-spear13xx.c +++ b/drivers/pci/host/pcie-spear13xx.c @@ -13,7 +13,6 @@ */ #include <linux/clk.h> -#include <linux/delay.h> #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/module.h> @@ -149,7 +148,6 @@ static int spear13xx_pcie_establish_link(struct pcie_port *pp) struct spear13xx_pcie *spear13xx_pcie = to_spear13xx_pcie(pp); struct pcie_app_reg *app_reg = spear13xx_pcie->app_base; u32 exp_cap_off = EXP_CAP_ID_OFFSET; - unsigned int retries; if (dw_pcie_link_up(pp)) { dev_err(pp->dev, "link already up\n"); @@ -200,17 +198,7 @@ static int spear13xx_pcie_establish_link(struct pcie_port *pp) | ((u32)1 << REG_TRANSLATION_ENABLE), &app_reg->app_ctrl_0); - /* check if the link is up or not */ - for (retries = 0; retries < 10; retries++) { - if (dw_pcie_link_up(pp)) { - dev_info(pp->dev, "link up\n"); - return 0; - } - mdelay(100); - } - - dev_err(pp->dev, "link Fail\n"); - return -EINVAL; + return dw_pcie_wait_for_link(pp); } static irqreturn_t spear13xx_pcie_irq_handler(int irq, void *arg) |