diff options
| -rw-r--r-- | arch/arm/boot/dts/bcm-nsp.dtsi | 144 |
1 files changed, 72 insertions, 72 deletions
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 49f9376d0d12..3b8c2c09286f 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -197,78 +197,6 @@ status = "disabled"; }; - pcie0: pcie@12000 { - compatible = "brcm,iproc-pcie"; - reg = <0x12000 0x1000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_NONE>; - - linux,pci-domain = <0>; - - bus-range = <0x00 0xff>; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - - /* Note: The HW does not support I/O resources. So, - * only the memory resource range is being specified. - */ - ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>; - - status = "disabled"; - }; - - pcie1: pcie@13000 { - compatible = "brcm,iproc-pcie"; - reg = <0x13000 0x1000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_NONE>; - - linux,pci-domain = <1>; - - bus-range = <0x00 0xff>; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - - /* Note: The HW does not support I/O resources. So, - * only the memory resource range is being specified. - */ - ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>; - - status = "disabled"; - }; - - pcie2: pcie@14000 { - compatible = "brcm,iproc-pcie"; - reg = <0x14000 0x1000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_NONE>; - - linux,pci-domain = <2>; - - bus-range = <0x00 0xff>; - - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - - /* Note: The HW does not support I/O resources. So, - * only the memory resource range is being specified. - */ - ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>; - - status = "disabled"; - }; - nand: nand@26000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x026000 0x600>, @@ -318,4 +246,76 @@ <0x3f408 0x04>; }; }; + + pcie0: pcie@18012000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18012000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_NONE>; + + linux,pci-domain = <0>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + + /* Note: The HW does not support I/O resources. So, + * only the memory resource range is being specified. + */ + ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>; + + status = "disabled"; + }; + + pcie1: pcie@18013000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18013000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_NONE>; + + linux,pci-domain = <1>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + + /* Note: The HW does not support I/O resources. So, + * only the memory resource range is being specified. + */ + ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>; + + status = "disabled"; + }; + + pcie2: pcie@18014000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18014000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_NONE>; + + linux,pci-domain = <2>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + + /* Note: The HW does not support I/O resources. So, + * only the memory resource range is being specified. + */ + ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>; + + status = "disabled"; + }; }; |