diff options
79 files changed, 1052 insertions, 1131 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index dc3de407ce05..7658d19bb111 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -470,6 +470,8 @@ config ARCH_MXC select CLKSRC_MMIO select GENERIC_IRQ_CHIP select MULTI_IRQ_HANDLER + select SPARSE_IRQ + select USE_OF help Support for Freescale MXC/iMX-based family of processors diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h index febe495d0c6e..15cb035309f7 100644 --- a/arch/arm/include/asm/mach/irq.h +++ b/arch/arm/include/asm/mach/irq.h @@ -17,7 +17,7 @@ struct seq_file; /* * This is internal. Do not use it. */ -extern void init_FIQ(void); +extern void init_FIQ(int); extern int show_fiq_list(struct seq_file *, int); #ifdef CONFIG_MULTI_IRQ_HANDLER diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c index c32f8456aa09..2adda11f712f 100644 --- a/arch/arm/kernel/fiq.c +++ b/arch/arm/kernel/fiq.c @@ -122,14 +122,16 @@ void release_fiq(struct fiq_handler *f) while (current_fiq->fiq_op(current_fiq->dev_id, 0)); } +static int fiq_start; + void enable_fiq(int fiq) { - enable_irq(fiq + FIQ_START); + enable_irq(fiq + fiq_start); } void disable_fiq(int fiq) { - disable_irq(fiq + FIQ_START); + disable_irq(fiq + fiq_start); } EXPORT_SYMBOL(set_fiq_handler); @@ -140,7 +142,8 @@ EXPORT_SYMBOL(release_fiq); EXPORT_SYMBOL(enable_fiq); EXPORT_SYMBOL(disable_fiq); -void __init init_FIQ(void) +void __init init_FIQ(int start) { no_fiq_insn = *(unsigned long *)0xffff001c; + fiq_start = start; } diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 7616101a35f0..afd542ad6f97 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -382,7 +382,6 @@ config MACH_IMX27IPCAM config MACH_IMX27_DT bool "Support i.MX27 platforms from device tree" select SOC_IMX27 - select USE_OF help Include support for Freescale i.MX27 based platforms using the device tree for discovery @@ -674,7 +673,6 @@ comment "i.MX51 machines:" config MACH_IMX51_DT bool "Support i.MX51 platforms from device tree" select SOC_IMX51 - select USE_OF select MACH_MX51_BABBAGE help Include support for Freescale i.MX51 based platforms @@ -770,7 +768,6 @@ comment "i.MX53 machines:" config MACH_IMX53_DT bool "Support i.MX53 platforms from device tree" select SOC_IMX53 - select USE_OF select MACH_MX53_ARD select MACH_MX53_EVK select MACH_MX53_LOCO @@ -845,7 +842,6 @@ config SOC_IMX6Q select MFD_ANATOP select PINCTRL select PINCTRL_IMX6Q - select USE_OF help This enables support for Freescale i.MX6 Quad processor. diff --git a/arch/arm/mach-imx/devices-imx31.h b/arch/arm/mach-imx/devices-imx31.h index 13f533d0aa5c..8b2ceb45bb83 100644 --- a/arch/arm/mach-imx/devices-imx31.h +++ b/arch/arm/mach-imx/devices-imx31.h @@ -42,8 +42,8 @@ extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[]; #define imx31_add_imx_uart4(pdata) imx31_add_imx_uart(4, pdata) extern const struct imx_ipu_core_data imx31_ipu_core_data; -#define imx31_add_ipu_core(pdata) \ - imx_add_ipu_core(&imx31_ipu_core_data, pdata) +#define imx31_add_ipu_core() \ + imx_add_ipu_core(&imx31_ipu_core_data) #define imx31_alloc_mx3_camera(pdata) \ imx_alloc_mx3_camera(&imx31_ipu_core_data, pdata) #define imx31_add_mx3_sdc_fb(pdata) \ diff --git a/arch/arm/mach-imx/devices-imx35.h b/arch/arm/mach-imx/devices-imx35.h index 4815be1ee675..c3e9f206ac2b 100644 --- a/arch/arm/mach-imx/devices-imx35.h +++ b/arch/arm/mach-imx/devices-imx35.h @@ -50,8 +50,8 @@ extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[]; #define imx35_add_imx_uart2(pdata) imx35_add_imx_uart(2, pdata) extern const struct imx_ipu_core_data imx35_ipu_core_data; -#define imx35_add_ipu_core(pdata) \ - imx_add_ipu_core(&imx35_ipu_core_data, pdata) +#define imx35_add_ipu_core() \ + imx_add_ipu_core(&imx35_ipu_core_data) #define imx35_alloc_mx3_camera(pdata) \ imx_alloc_mx3_camera(&imx35_ipu_core_data, pdata) #define imx35_add_mx3_sdc_fb(pdata) \ diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index b46cab0ced53..fd3177f9e79a 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -266,7 +266,7 @@ static struct spi_board_info __maybe_unused .bus_num = 0, .chip_select = 0, .max_speed_hz = 1500000, - .irq = IRQ_GPIOD(25), + /* irq number is run-time assigned */ .platform_data = &ads7846_config, .mode = SPI_MODE_2, }, @@ -329,6 +329,7 @@ void __init eukrea_mbimx27_baseboard_init(void) /* SPI_CS0 init */ mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT); imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data); + eukrea_mbimx27_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(4, 25)); spi_register_board_info(eukrea_mbimx27_spi_board_info, ARRAY_SIZE(eukrea_mbimx27_spi_board_info)); diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c index 557f6c486053..6e9dd12a6961 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c @@ -95,10 +95,6 @@ static const struct fb_videomode fb_modedb[] = { }, }; -static const struct ipu_platform_data mx3_ipu_data __initconst = { - .irq_base = MXC_IPU_IRQ_START, -}; - static struct mx3fb_platform_data mx3fb_pdata __initdata = { .name = "CMO-QVGA", .mode = fb_modedb, @@ -287,7 +283,7 @@ void __init eukrea_mbimxsd35_baseboard_init(void) printk(KERN_ERR "error setting mbimxsd pads !\n"); imx35_add_imx_uart1(&uart_pdata); - imx35_add_ipu_core(&mx3_ipu_data); + imx35_add_ipu_core(); imx35_add_mx3_sdc_fb(&mx3fb_pdata); imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata); diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c index 52efe4d5149b..e80d5235dac0 100644 --- a/arch/arm/mach-imx/imx27-dt.c +++ b/arch/arm/mach-imx/imx27-dt.c @@ -10,7 +10,6 @@ */ #include <linux/irq.h> -#include <linux/irqdomain.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <asm/mach/arch.h> @@ -33,35 +32,8 @@ static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = { { /* sentinel */ } }; -static int __init imx27_avic_add_irq_domain(struct device_node *np, - struct device_node *interrupt_parent) -{ - irq_domain_add_legacy(np, 64, 0, 0, &irq_domain_simple_ops, NULL); - return 0; -} - -static int __init imx27_gpio_add_irq_domain(struct device_node *np, - struct device_node *interrupt_parent) -{ - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; - - gpio_irq_base -= 32; - irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, - NULL); - - return 0; -} - -static const struct of_device_id imx27_irq_match[] __initconst = { - { .compatible = "fsl,imx27-avic", .data = imx27_avic_add_irq_domain, }, - { .compatible = "fsl,imx27-gpio", .data = imx27_gpio_add_irq_domain, }, - { /* sentinel */ } -}; - static void __init imx27_dt_init(void) { - of_irq_init(imx27_irq_match); - of_platform_populate(NULL, of_default_bus_match_table, imx27_auxdata_lookup, NULL); } diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index 18e78dba4298..d4067fe36357 100644 --- a/arch/arm/mach-imx/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c @@ -11,7 +11,6 @@ */ #include <linux/irq.h> -#include <linux/irqdomain.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/pinctrl/machine.h> @@ -45,30 +44,6 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = { { /* sentinel */ } }; -static int __init imx51_tzic_add_irq_domain(struct device_node *np, - struct device_node *interrupt_parent) -{ - irq_domain_add_legacy(np, 128, 0, 0, &irq_domain_simple_ops, NULL); - return 0; -} - -static int __init imx51_gpio_add_irq_domain(struct device_node *np, - struct device_node *interrupt_parent) -{ - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; - - gpio_irq_base -= 32; - irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL); - - return 0; -} - -static const struct of_device_id imx51_irq_match[] __initconst = { - { .compatible = "fsl,imx51-tzic", .data = imx51_tzic_add_irq_domain, }, - { .compatible = "fsl,imx51-gpio", .data = imx51_gpio_add_irq_domain, }, - { /* sentinel */ } -}; - static const struct of_device_id imx51_iomuxc_of_match[] __initconst = { { .compatible = "fsl,imx51-iomuxc-babbage", .data = imx51_babbage_common_init, }, { /* sentinel */ } @@ -80,8 +55,6 @@ static void __init imx51_dt_init(void) const struct of_device_id *of_id; void (*func)(void); - of_irq_init(imx51_irq_match); - pinctrl_provide_dummies(); node = of_find_matching_node(NULL, imx51_iomuxc_of_match); diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c index eb04b6248e48..fdd90805d98e 100644 --- a/arch/arm/mach-imx/imx53-dt.c +++ b/arch/arm/mach-imx/imx53-dt.c @@ -15,7 +15,6 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/irq.h> -#include <linux/irqdomain.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/pinctrl/machine.h> @@ -52,30 +51,6 @@ static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = { { /* sentinel */ } }; -static int __init imx53_tzic_add_irq_domain(struct device_node *np, - struct device_node *interrupt_parent) -{ - irq_domain_add_legacy(np, 128, 0, 0, &irq_domain_simple_ops, NULL); - return 0; -} - -static int __init imx53_gpio_add_irq_domain(struct device_node *np, - struct device_node *interrupt_parent) -{ - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; - - gpio_irq_base -= 32; - irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL); - - return 0; -} - -static const struct of_device_id imx53_irq_match[] __initconst = { - { .compatible = "fsl,imx53-tzic", .data = imx53_tzic_add_irq_domain, }, - { .compatible = "fsl,imx53-gpio", .data = imx53_gpio_add_irq_domain, }, - { /* sentinel */ } -}; - static const struct of_device_id imx53_iomuxc_of_match[] __initconst = { { .compatible = "fsl,imx53-iomuxc-ard", .data = imx53_ard_common_init, }, { .compatible = "fsl,imx53-iomuxc-evk", .data = imx53_evk_common_init, }, @@ -103,8 +78,6 @@ static void __init imx53_dt_init(void) const struct of_device_id *of_id; void (*func)(void); - of_irq_init(imx53_irq_match); - pinctrl_provide_dummies(); node = of_find_matching_node(NULL, imx53_iomuxc_of_match); diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c index f4a63ee9e217..7b99a79722b6 100644 --- a/arch/arm/mach-imx/mach-apf9328.c +++ b/arch/arm/mach-imx/mach-apf9328.c @@ -18,6 +18,7 @@ #include <linux/platform_device.h> #include <linux/mtd/physmap.h> #include <linux/dm9000.h> +#include <linux/gpio.h> #include <linux/i2c.h> #include <asm/mach-types.h> @@ -26,7 +27,6 @@ #include <mach/common.h> #include <mach/hardware.h> -#include <mach/irqs.h> #include <mach/iomux-mx1.h> #include "devices-imx1.h" @@ -87,8 +87,7 @@ static struct resource dm9000_resources[] = { .end = MX1_CS4_PHYS + 0x00C00003, .flags = IORESOURCE_MEM, }, { - .start = IRQ_GPIOB(14), - .end = IRQ_GPIOB(14), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, }; @@ -129,6 +128,8 @@ static void __init apf9328_init(void) imx1_add_imx_i2c(&apf9328_i2c_data); + dm9000_resources[2].start = gpio_to_irq(IMX_GPIO_NR(2, 14)); + dm9000_resources[2].end = gpio_to_irq(IMX_GPIO_NR(2, 14)); platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index c650145d1646..2c6ab3273f9e 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -367,10 +367,6 @@ static const struct fb_videomode fb_modedb[] = { }, }; -static const struct ipu_platform_data mx3_ipu_data __initconst = { - .irq_base = MXC_IPU_IRQ_START, -}; - static struct mx3fb_platform_data mx3fb_pdata __initdata = { .name = "CRT-VGA", .mode = fb_modedb, @@ -408,7 +404,8 @@ static int armadillo5x0_sdhc1_init(struct device *dev, gpio_direction_input(gpio_wp); /* When supported the trigger type have to be BOTH */ - ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), detect_irq, + ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)), + detect_irq, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "sdhc-detect", data); @@ -429,7 +426,7 @@ err_gpio_free: static void armadillo5x0_sdhc1_exit(struct device *dev, void *data) { - free_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), data); + free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)), data); gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)); gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B)); } @@ -450,8 +447,7 @@ static struct resource armadillo5x0_smc911x_resources[] = { .end = MX31_CS3_BASE_ADDR + SZ_32M - 1, .flags = IORESOURCE_MEM, }, { - .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), - .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, }; @@ -498,6 +494,10 @@ static void __init armadillo5x0_init(void) regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + armadillo5x0_smc911x_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); + armadillo5x0_smc911x_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); platform_add_devices(devices, ARRAY_SIZE(devices)); imx_add_gpio_keys(&armadillo5x0_button_data); imx31_add_imx_i2c1(NULL); @@ -513,7 +513,7 @@ static void __init armadillo5x0_init(void) imx31_add_mxc_mmc(0, &sdhc_pdata); /* Register FB */ - imx31_add_ipu_core(&mx3_ipu_data); + imx31_add_ipu_core(); imx31_add_mx3_sdc_fb(&mx3fb_pdata); /* Register NOR Flash */ diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 9a3b06e688c5..2bb9e18d9ee1 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -169,28 +169,28 @@ static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = { static struct plat_serial8250_port serial_platform_data[] = { { .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000), - .irq = IRQ_GPIOB(23), + /* irq number is run-time assigned */ .uartclk = 14745600, .regshift = 1, .iotype = UPIO_MEM, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000), - .irq = IRQ_GPIOB(22), + /* irq number is run-time assigned */ .uartclk = 14745600, .regshift = 1, .iotype = UPIO_MEM, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000), - .irq = IRQ_GPIOB(27), + /* irq number is run-time assigned */ .uartclk = 14745600, .regshift = 1, .iotype = UPIO_MEM, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000), - .irq = IRQ_GPIOB(30), + /* irq number is run-time assigned */ .uartclk = 14745600, .regshift = 1, .iotype = UPIO_MEM, @@ -279,6 +279,10 @@ static void __init eukrea_cpuimx27_init(void) #endif #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) + serial_platform_data[0].irq = IMX_GPIO_NR(2, 23); + serial_platform_data[1].irq = IMX_GPIO_NR(2, 22); + serial_platform_data[2].irq = IMX_GPIO_NR(2, 27); + serial_platform_data[3].irq = IMX_GPIO_NR(2, 30); platform_device_register(&serial_device); #endif diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index 1634e54ffed5..d49b0ec6bdec 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -71,7 +71,7 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = { }, { I2C_BOARD_INFO("tsc2007", 0x48), .platform_data = &tsc2007_info, - .irq = IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO), + /* irq number is run-time assigned */ }, }; @@ -172,6 +172,7 @@ static void __init eukrea_cpuimx35_init(void) imx35_add_imx_uart0(&uart_pdata); imx35_add_mxc_nand(&eukrea_cpuimx35_nand_board_info); + eukrea_cpuimx35_i2c_devices[1].irq = gpio_to_irq(TSC2007_IRQGPIO); i2c_register_board_info(0, eukrea_cpuimx35_i2c_devices, ARRAY_SIZE(eukrea_cpuimx35_i2c_devices)); imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data); diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c index e78b40b41462..b87cc49ab1e8 100644 --- a/arch/arm/mach-imx/mach-cpuimx51sd.c +++ b/arch/arm/mach-imx/mach-cpuimx51sd.c @@ -258,7 +258,7 @@ static struct spi_board_info cpuimx51sd_spi_device[] = { .mode = SPI_MODE_0, .chip_select = 0, .platform_data = &mcp251x_info, - .irq = IMX_GPIO_TO_IRQ(CAN_IRQGPIO) + /* irq number is run-time assigned */ }, }; @@ -309,6 +309,7 @@ static void __init eukrea_cpuimx51sd_init(void) msleep(20); gpio_set_value(CAN_RST, 1); imx51_add_ecspi(0, &cpuimx51sd_ecspi1_pdata); + cpuimx51sd_spi_device[0].irq = gpio_to_irq(CAN_IRQGPIO); spi_register_board_info(cpuimx51sd_spi_device, ARRAY_SIZE(cpuimx51sd_spi_device)); diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index ba09552fe5fe..f264ddddd47c 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -40,6 +40,7 @@ #include <asm/mach/time.h> #include <asm/system_info.h> #include <mach/common.h> +#include <mach/hardware.h> #include <mach/iomux-mx27.h> #include "devices-imx27.h" @@ -47,7 +48,7 @@ #define TVP5150_RSTN (GPIO_PORTC + 18) #define TVP5150_PWDN (GPIO_PORTC + 19) #define OTG_PHY_CS_GPIO (GPIO_PORTF + 17) -#define SDHC1_IRQ IRQ_GPIOB(25) +#define SDHC1_IRQ_GPIO IMX_GPIO_NR(2, 25) #define MOTHERBOARD_BIT2 (GPIO_PORTD + 31) #define MOTHERBOARD_BIT1 (GPIO_PORTD + 30) @@ -307,14 +308,14 @@ static int visstrim_m10_sdhc1_init(struct device *dev, { int ret; - ret = request_irq(SDHC1_IRQ, detect_irq, IRQF_TRIGGER_FALLING, - "mmc-detect", data); + ret = request_irq(gpio_to_irq(SDHC1_IRQ_GPIO), detect_irq, + IRQF_TRIGGER_FALLING, "mmc-detect", data); return ret; } static void visstrim_m10_sdhc1_exit(struct device *dev, void *data) { - free_irq(SDHC1_IRQ, data); + free_irq(gpio_to_irq(SDHC1_IRQ_GPIO), data); } static const struct imxmmc_platform_data visstrim_m10_sdhc_pdata __initconst = { diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 140f55010630..426d2087c460 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -16,7 +16,6 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/irq.h> -#include <linux/irqdomain.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> @@ -177,21 +176,8 @@ static void __init imx6q_map_io(void) imx6q_clock_map_io(); } -static int __init imx6q_gpio_add_irq_domain(struct device_node *np, - struct device_node *interrupt_parent) -{ - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; - - gpio_irq_base -= 32; - irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, - NULL); - - return 0; -} - static const struct of_device_id imx6q_irq_match[] __initconst = { { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, - { .compatible = "fsl,imx6q-gpio", .data = imx6q_gpio_add_irq_domain, }, { /* sentinel */ } }; diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index 15a26e908260..5d08533ab2c7 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -73,7 +73,7 @@ static struct plat_serial8250_port serial_platform_data[] = { { .membase = KZM_ARM11_IO_ADDRESS(KZM_ARM11_16550), .mapbase = KZM_ARM11_16550, - .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), + /* irq number is run-time assigned */ .irqflags = IRQ_TYPE_EDGE_RISING, .uartclk = 14745600, .regshift = 0, @@ -91,8 +91,7 @@ static struct resource serial8250_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), - .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ, }, }; @@ -125,6 +124,13 @@ static int __init kzm_init_ext_uart(void) tmp |= 0x2; __raw_writeb(tmp, KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1)); + serial_platform_data[0].irq = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)); + serial8250_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)); + serial8250_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)); + return platform_device_register(&serial_device); } #else @@ -152,8 +158,7 @@ static struct resource kzm_smsc9118_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_2), - .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_2), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; @@ -184,6 +189,11 @@ static int __init kzm_init_smsc9118(void) regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + kzm_smsc9118_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2)); + kzm_smsc9118_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2)); + return platform_device_register(&kzm_smsc9118_device); } #else diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index 7274e7928136..667f359a2e8b 100644 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -26,7 +26,6 @@ #include <mach/common.h> #include <mach/hardware.h> #include <mach/iomux-mx1.h> -#include <mach/irqs.h> #include "devices-imx1.h" diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index 3e7401fca76c..ed22e3fe6ec8 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -38,7 +38,7 @@ (MX21ADS_MMIO_BASE_ADDR + (offset)) #define MX21ADS_CS8900A_MMIO_SIZE 0x200000 -#define MX21ADS_CS8900A_IRQ IRQ_GPIOE(11) +#define MX21ADS_CS8900A_IRQ_GPIO IMX_GPIO_NR(5, 11) #define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000) #define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000) #define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000) @@ -159,9 +159,10 @@ static struct platform_device mx21ads_nor_mtd_device = { .resource = &mx21ads_flash_resource, }; -static const struct resource mx21ads_cs8900_resources[] __initconst = { +static struct resource mx21ads_cs8900_resources[] __initdata = { DEFINE_RES_MEM(MX21_CS1_BASE_ADDR, MX21ADS_CS8900A_MMIO_SIZE), - DEFINE_RES_IRQ(MX21ADS_CS8900A_IRQ), + /* irq number is run-time assigned */ + DEFINE_RES_IRQ(-1), }; static const struct platform_device_info mx21ads_cs8900_devinfo __initconst = { @@ -241,13 +242,13 @@ static int mx21ads_sdhc_get_ro(struct device *dev) static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq, void *data) { - return request_irq(IRQ_GPIOD(25), detect_irq, + return request_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), detect_irq, IRQF_TRIGGER_FALLING, "mmc-detect", data); } static void mx21ads_sdhc_exit(struct device *dev, void *data) { - free_irq(IRQ_GPIOD(25), data); + free_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), data); } static const struct imxmmc_platform_data mx21ads_sdhc_pdata __initconst = { @@ -304,6 +305,11 @@ static void __init mx21ads_board_init(void) imx21_add_mxc_nand(&mx21ads_nand_board_info); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + + mx21ads_cs8900_resources[1].start = + gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO); + mx21ads_cs8900_resources[1].end = + gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO); platform_device_register_full(&mx21ads_cs8900_devinfo); } diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index ce9a5c26290c..58c24c1a7ab7 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -40,7 +40,6 @@ #include <mach/common.h> #include <mach/iomux-mx27.h> #include <mach/ulpi.h> -#include <mach/irqs.h> #include <mach/3ds_debugboard.h> #include "devices-imx27.h" @@ -48,7 +47,6 @@ #define SD1_EN_GPIO IMX_GPIO_NR(2, 25) #define OTG_PHY_RESET_GPIO IMX_GPIO_NR(2, 23) #define SPI2_SS0 IMX_GPIO_NR(4, 21) -#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(3, 28)) #define PMIC_INT IMX_GPIO_NR(3, 14) #define SPI1_SS0 IMX_GPIO_NR(4, 28) #define SD1_CD IMX_GPIO_NR(2, 26) @@ -445,7 +443,7 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = { .bus_num = 1, .chip_select = 0, /* SS0 */ .platform_data = &mc13783_pdata, - .irq = IMX_GPIO_TO_IRQ(PMIC_INT), + /* irq number is run-time assigned */ .mode = SPI_CS_HIGH, }, { .modalias = "l4f00242t03", @@ -496,10 +494,11 @@ static void __init mx27pdk_init(void) imx27_add_spi_imx1(&spi2_pdata); imx27_add_spi_imx0(&spi1_pdata); + mx27_3ds_spi_devs[0].irq = gpio_to_irq(PMIC_INT); spi_register_board_info(mx27_3ds_spi_devs, ARRAY_SIZE(mx27_3ds_spi_devs)); - if (mxc_expio_init(MX27_CS5_BASE_ADDR, EXPIO_PARENT_INT)) + if (mxc_expio_init(MX27_CS5_BASE_ADDR, IMX_GPIO_NR(3, 28))) pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n"); imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data); platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index 7936bb32264d..7dc59bac0e55 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -246,25 +246,25 @@ static const struct imx_fb_platform_data mx27ads_fb_data __initconst = { static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq, void *data) { - return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING, - "sdhc1-card-detect", data); + return request_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), detect_irq, + IRQF_TRIGGER_RISING, "sdhc1-card-detect", data); } static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data) { - return request_irq(IRQ_GPIOB(7), detect_irq, IRQF_TRIGGER_RISING, - "sdhc2-card-detect", data); + return request_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), detect_irq, + IRQF_TRIGGER_RISING, "sdhc2-card-detect", data); } static void mx27ads_sdhc1_exit(struct device *dev, void *data) { - free_irq(IRQ_GPIOE(21), data); + free_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), data); } static void mx27ads_sdhc2_exit(struct device *dev, void *data) { - free_irq(IRQ_GPIOB(7), data); + free_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), data); } static const struct imxmmc_platform_data sdhc1_pdata __initconst = { diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 928e1dcbc6a7..8915f937b7d5 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -44,9 +44,6 @@ #include "devices-imx31.h" -/* CPLD IRQ line for external uart, external ethernet etc */ -#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1) - static int mx31_3ds_pins[] = { /* UART1 */ MX31_PIN_CTS1__CTS1, @@ -277,10 +274,6 @@ static const struct fb_videomode fb_modedb[] = { }, }; -static struct ipu_platform_data mx3_ipu_data = { - .irq_base = MXC_IPU_IRQ_START, -}; - static struct mx3fb_platform_data mx3fb_pdata __initdata = { .name = "Epson-VGA", .mode = fb_modedb, @@ -317,7 +310,7 @@ static int mx31_3ds_sdhc1_init(struct device *dev, return ret; } - ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), + ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)), detect_irq, IRQF_DISABLED | IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "sdhc1-detect", data); @@ -336,7 +329,7 @@ gpio_free: static void mx31_3ds_sdhc1_exit(struct device *dev, void *data) { - free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), data); + free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)), data); gpio_free_array(mx31_3ds_sdhc1_gpios, ARRAY_SIZE(mx31_3ds_sdhc1_gpios)); } @@ -539,7 +532,7 @@ static struct spi_board_info mx31_3ds_spi_devs[] __initdata = { .bus_num = 1, .chip_select = 1, /* SS2 */ .platform_data = &mc13783_pdata, - .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3), + /* irq number is run-time assigned */ .mode = SPI_CS_HIGH, }, { .modalias = "l4f00242t03", @@ -714,6 +707,7 @@ static void __init mx31_3ds_init(void) imx31_add_mxc_nand(&mx31_3ds_nand_board_info); imx31_add_spi_imx1(&spi1_pdata); + mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); spi_register_board_info(mx31_3ds_spi_devs, ARRAY_SIZE(mx31_3ds_spi_devs)); @@ -736,7 +730,7 @@ static void __init mx31_3ds_init(void) if (!otg_mode_host) imx31_add_fsl_usb2_udc(&usbotg_pdata); - if (mxc_expio_init(MX31_CS5_BASE_ADDR, EXPIO_PARENT_INT)) + if (mxc_expio_init(MX31_CS5_BASE_ADDR, IOMUX_TO_GPIO(MX31_PIN_GPIO1_1))) printk(KERN_WARNING "Init of the debug board failed, all " "devices on the debug board are unusable.\n"); imx31_add_imx2_wdt(); @@ -744,7 +738,7 @@ static void __init mx31_3ds_init(void) imx31_add_mxc_mmc(0, &sdhc1_pdata); imx31_add_spi_imx0(&spi0_pdata); - imx31_add_ipu_core(&mx3_ipu_data); + imx31_add_ipu_core(); imx31_add_mx3_sdc_fb(&mx3fb_pdata); /* CSI */ diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index 4518e5448227..d37f4809c556 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -21,6 +21,7 @@ #include <linux/gpio.h> #include <linux/i2c.h> #include <linux/irq.h> +#include <linux/irqdomain.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -62,20 +63,18 @@ #define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS) #define PBC_INTMASK_SET_REG (PBC_INTMASK_SET + PBC_BASE_ADDRESS) #define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS) -#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4) -#define MXC_EXP_IO_BASE MXC_BOARD_IRQ_START -#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE) - -#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10) -#define EXPIO_INT_XUART_INTB (MXC_EXP_IO_BASE + 11) +#define EXPIO_INT_XUART_INTA 10 +#define EXPIO_INT_XUART_INTB 11 #define MXC_MAX_EXP_IO_LINES 16 /* CS8900 */ -#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8) +#define EXPIO_INT_ENET_INT 8 #define CS4_CS8900_MMIO_START 0x20000 +static struct irq_domain *domain; + /* * The serial port definition structure. */ @@ -83,7 +82,6 @@ static struct plat_serial8250_port serial_platform_data[] = { { .membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA), .mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA), - .irq = EXPIO_INT_XUART_INTA, .uartclk = 14745600, .regshift = 0, .iotype = UPIO_MEM, @@ -91,7 +89,6 @@ static struct plat_serial8250_port serial_platform_data[] = { }, { .membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB), .mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB), - .irq = EXPIO_INT_XUART_INTB, .uartclk = 14745600, .regshift = 0, .iotype = UPIO_MEM, @@ -108,9 +105,9 @@ static struct platform_device serial_device = { }, }; -static const struct resource mx31ads_cs8900_resources[] __initconst = { +static struct resource mx31ads_cs8900_resources[] __initdata = { DEFINE_RES_MEM(MX31_CS4_BASE_ADDR + CS4_CS8900_MMIO_START, SZ_64K), - DEFINE_RES_IRQ(EXPIO_INT_ENET_INT), + DEFINE_RES_IRQ(-1), }; static const struct platform_device_info mx31ads_cs8900_devinfo __initconst = { @@ -122,11 +119,19 @@ static const struct platform_device_info mx31ads_cs8900_devinfo __initconst = { static int __init mxc_init_extuart(void) { + serial_platform_data[0].irq = irq_find_mapping(domain, + EXPIO_INT_XUART_INTA); + serial_platform_data[1].irq = irq_find_mapping(domain, + EXPIO_INT_XUART_INTB); return platform_device_register(&serial_device); } static void __init mxc_init_ext_ethernet(void) { + mx31ads_cs8900_resources[1].start = + irq_find_mapping(domain, EXPIO_INT_ENET_INT); + mx31ads_cs8900_resources[1].end = + irq_find_mapping(domain, EXPIO_INT_ENET_INT); platform_device_register_full( (struct platform_device_info *)&mx31ads_cs8900_devinfo); } @@ -157,12 +162,12 @@ static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc) imr_val = __raw_readw(PBC_INTMASK_SET_REG); int_valid = __raw_readw(PBC_INTSTATUS_REG) & imr_val; - expio_irq = MXC_EXP_IO_BASE; + expio_irq = 0; for (; int_valid != 0; int_valid >>= 1, expio_irq++) { if ((int_valid & 1) == 0) continue; - generic_handle_irq(expio_irq); + generic_handle_irq(irq_find_mapping(domain, expio_irq)); } } @@ -172,7 +177,7 @@ static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc) */ static void expio_mask_irq(struct irq_data *d) { - u32 expio = MXC_IRQ_TO_EXPIO(d->irq); + u32 expio = d->hwirq; /* mask the interrupt */ __raw_writew(1 << expio, PBC_INTMASK_CLEAR_REG); __raw_readw(PBC_INTMASK_CLEAR_REG); @@ -184,7 +189,7 @@ static void expio_mask_irq(struct irq_data *d) */ static void expio_ack_irq(struct irq_data *d) { - u32 expio = MXC_IRQ_TO_EXPIO(d->irq); + u32 expio = d->hwirq; /* clear the interrupt status */ __raw_writew(1 << expio, PBC_INTSTATUS_REG); } @@ -195,7 +200,7 @@ static void expio_ack_irq(struct irq_data *d) */ static void expio_unmask_irq(struct irq_data *d) { - u32 expio = MXC_IRQ_TO_EXPIO(d->irq); + u32 expio = d->hwirq; /* unmask the interrupt */ __raw_writew(1 << expio, PBC_INTMASK_SET_REG); } @@ -209,7 +214,8 @@ static struct irq_chip expio_irq_chip = { static void __init mx31ads_init_expio(void) { - int i; + int irq_base; + int i, irq; printk(KERN_INFO "MX31ADS EXPIO(CPLD) hardware\n"); @@ -221,13 +227,21 @@ static void __init mx31ads_init_expio(void) /* disable the interrupt and clear the status */ __raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG); __raw_writew(0xFFFF, PBC_INTSTATUS_REG); - for (i = MXC_EXP_IO_BASE; i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES); - i++) { + + irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id()); + WARN_ON(irq_base < 0); + + domain = irq_domain_add_legacy(NULL, MXC_MAX_EXP_IO_LINES, irq_base, 0, + &irq_domain_simple_ops, NULL); + WARN_ON(!domain); + + for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) { irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq); set_irq_flags(i, IRQF_VALID); } - irq_set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_HIGH); - irq_set_chained_handler(EXPIO_PARENT_INT, mx31ads_expio_irq_handler); + irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_4)); + irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH); + irq_set_chained_handler(irq, mx31ads_expio_irq_handler); } #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 @@ -479,7 +493,6 @@ static int mx31_wm8350_init(struct wm8350 *wm8350) static struct wm8350_platform_data __initdata mx31_wm8350_pdata = { .init = mx31_wm8350_init, - .irq_base = MXC_BOARD_IRQ_START + MXC_MAX_EXP_IO_LINES, }; #endif @@ -488,13 +501,17 @@ static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = { { I2C_BOARD_INFO("wm8350", 0x1a), .platform_data = &mx31_wm8350_pdata, - .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3), + /* irq number is run-time assigned */ }, #endif }; static void __init mxc_init_i2c(void) { +#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 + mx31ads_i2c1_devices[0].irq = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); +#endif i2c_register_board_info(1, mx31ads_i2c1_devices, ARRAY_SIZE(mx31ads_i2c1_devices)); diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index 83714b0cc290..34b9bf075daf 100644 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -65,8 +65,7 @@ static struct resource smsc91x_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), - .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, } }; @@ -233,7 +232,7 @@ static struct spi_board_info mc13783_dev __initdata = { .bus_num = 1, .chip_select = 0, .platform_data = &mc13783_pdata, - .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3), + /* irq number is run-time assigned */ }; static struct platform_device *devices[] __initdata = { @@ -285,10 +284,15 @@ static void __init mx31lilly_board_init(void) imx31_add_spi_imx0(&spi0_pdata); imx31_add_spi_imx1(&spi1_pdata); + mc13783_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); spi_register_board_info(&mc13783_dev, 1); regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + smsc91x_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); + smsc91x_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); platform_add_devices(devices, ARRAY_SIZE(devices)); /* USB */ diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index 686c60587980..c8785b39eaed 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -43,7 +43,6 @@ #include <mach/common.h> #include <mach/board-mx31lite.h> #include <mach/iomux-mx3.h> -#include <mach/irqs.h> #include <mach/ulpi.h> #include "devices-imx31.h" @@ -83,8 +82,7 @@ static struct resource smsc911x_resources[] = { .end = MX31_CS4_BASE_ADDR + 0x100, .flags = IORESOURCE_MEM, }, { - .start = IOMUX_TO_IRQ(MX31_PIN_SFS6), - .end = IOMUX_TO_IRQ(MX31_PIN_SFS6), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ, }, }; @@ -124,7 +122,7 @@ static struct spi_board_info mc13783_spi_dev __initdata = { .bus_num = 1, .chip_select = 0, .platform_data = &mc13783_pdata, - .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3), + /* irq number is run-time assigned */ }; /* @@ -258,6 +256,7 @@ static void __init mx31lite_init(void) imx31_add_mxc_nand(&mx31lite_nand_board_info); imx31_add_spi_imx1(&spi1_pdata); + mc13783_spi_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); spi_register_board_info(&mc13783_spi_dev, 1); /* USB */ @@ -274,6 +273,10 @@ static void __init mx31lite_init(void) pr_warning("could not get LAN irq gpio\n"); else { gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6)); + smsc911x_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SFS6)); + smsc911x_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SFS6)); platform_device_register(&smsc911x_device); } } diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index 63e84e67b990..d46290b288ed 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -303,7 +303,7 @@ static struct imx_ssi_platform_data moboard_ssi_pdata = { static struct spi_board_info moboard_spi_board_info[] __initdata = { { .modalias = "mc13783", - .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3), + /* irq number is run-time assigned */ .max_speed_hz = 300000, .bus_num = 1, .chip_select = 0, @@ -473,10 +473,6 @@ static const struct gpio_led_platform_data mx31moboard_led_pdata __initconst = { .leds = mx31moboard_leds, }; -static const struct ipu_platform_data mx3_ipu_data __initconst = { - .irq_base = MXC_IPU_IRQ_START, -}; - static struct platform_device *devices[] __initdata = { &mx31moboard_flash, }; @@ -494,7 +490,7 @@ static int __init mx31moboard_init_cam(void) int dma, ret = -ENOMEM; struct platform_device *pdev; - imx31_add_ipu_core(&mx3_ipu_data); + imx31_add_ipu_core(); pdev = imx31_alloc_mx3_camera(&camera_pdata); if (IS_ERR(pdev)) @@ -557,6 +553,8 @@ static void __init mx31moboard_init(void) gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq"); gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); + moboard_spi_board_info[0].irq = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); spi_register_board_info(moboard_spi_board_info, ARRAY_SIZE(moboard_spi_board_info)); diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index 69018e5c52de..504983c68aa8 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -46,7 +46,6 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-mx35.h> -#include <mach/irqs.h> #include <mach/3ds_debugboard.h> #include <video/platform_lcd.h> @@ -80,10 +79,6 @@ static const struct fb_videomode fb_modedb[] = { }, }; -static const struct ipu_platform_data mx3_ipu_data __initconst = { - .irq_base = MXC_IPU_IRQ_START, -}; - static struct mx3fb_platform_data mx3fb_pdata __initdata = { .name = "Ceramate-CLAA070VC01", .mode = fb_modedb, @@ -136,8 +131,6 @@ static struct platform_device mx35_3ds_lcd = { .dev.platform_data = &mx35_3ds_lcd_data, }; -#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(1, 1)) - static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -297,10 +290,6 @@ err: return ret; } -static const struct ipu_platform_data mx35_3ds_ipu_data __initconst = { - .irq_base = MXC_IPU_IRQ_START, -}; - static struct i2c_board_info mx35_3ds_i2c_camera = { I2C_BOARD_INFO("ov2640", 0x30), }; @@ -492,7 +481,7 @@ static struct i2c_board_info mx35_3ds_i2c_mc13892 = { I2C_BOARD_INFO("mc13892", 0x08), .platform_data = &mx35_3ds_mc13892_data, - .irq = IMX_GPIO_TO_IRQ(GPIO_PMIC_INT), + /* irq number is run-time assigned */ }; static void __init imx35_3ds_init_mc13892(void) @@ -504,6 +493,7 @@ static void __init imx35_3ds_init_mc13892(void) return; } + mx35_3ds_i2c_mc13892.irq = gpio_to_irq(GPIO_PMIC_INT); i2c_register_board_info(0, &mx35_3ds_i2c_mc13892, 1); } @@ -588,7 +578,7 @@ static void __init mx35_3ds_init(void) imx35_add_mxc_nand(&mx35pdk_nand_board_info); imx35_add_sdhci_esdhc_imx(0, NULL); - if (mxc_expio_init(MX35_CS5_BASE_ADDR, EXPIO_PARENT_INT)) + if (mxc_expio_init(MX35_CS5_BASE_ADDR, IMX_GPIO_NR(1, 1))) pr_warn("Init of the debugboard failed, all " "devices on the debugboard are unusable.\n"); imx35_add_imx_i2c0(&mx35_3ds_i2c0_data); @@ -596,7 +586,7 @@ static void __init mx35_3ds_init(void) i2c_register_board_info( 0, i2c_devices_3ds, ARRAY_SIZE(i2c_devices_3ds)); - imx35_add_ipu_core(&mx35_3ds_ipu_data); + imx35_add_ipu_core(); platform_device_register(&mx35_3ds_ov2640); imx35_3ds_init_camera(); diff --git a/arch/arm/mach-imx/mach-mx51_3ds.c b/arch/arm/mach-imx/mach-mx51_3ds.c index 2edb563b968d..9ee84a4af639 100644 --- a/arch/arm/mach-imx/mach-mx51_3ds.c +++ b/arch/arm/mach-imx/mach-mx51_3ds.c @@ -26,7 +26,6 @@ #include "devices-imx51.h" -#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(1, 6)) #define MX51_3DS_ECSPI2_CS (GPIO_PORTC + 28) static iomux_v3_cfg_t mx51_3ds_pads[] = { @@ -148,7 +147,7 @@ static void __init mx51_3ds_init(void) spi_register_board_info(mx51_3ds_spi_nor_device, ARRAY_SIZE(mx51_3ds_spi_nor_device)); - if (mxc_expio_init(MX51_CS5_BASE_ADDR, EXPIO_PARENT_INT)) + if (mxc_expio_init(MX51_CS5_BASE_ADDR, IMX_GPIO_NR(1, 6))) printk(KERN_WARNING "Init of the debugboard failed, all " "devices on the board are unusable.\n"); diff --git a/arch/arm/mach-imx/mach-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c index 4a7593a953e2..f641a1758691 100644 --- a/arch/arm/mach-imx/mach-mx53_ard.c +++ b/arch/arm/mach-imx/mach-mx53_ard.c @@ -135,8 +135,7 @@ static struct resource ard_smsc911x_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B), - .end = IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ, }, }; @@ -240,6 +239,8 @@ static void __init mx53_ard_board_init(void) imx53_ard_common_init(); mx53_ard_io_init(); regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + ard_smsc911x_resources[1].start = gpio_to_irq(ARD_ETHERNET_INT_B); + ard_smsc911x_resources[1].end = gpio_to_irq(ARD_ETHERNET_INT_B); platform_add_devices(devices, ARRAY_SIZE(devices)); imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data); diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c index 8b3d3f07d894..0bf6d30aa32d 100644 --- a/arch/arm/mach-imx/mach-mxt_td60.c +++ b/arch/arm/mach-imx/mach-mxt_td60.c @@ -213,13 +213,13 @@ static const struct imx_fb_platform_data mxt_td60_fb_data __initconst = { static int mxt_td60_sdhc1_init(struct device *dev, irq_handler_t detect_irq, void *data) { - return request_irq(IRQ_GPIOF(8), detect_irq, IRQF_TRIGGER_FALLING, - "sdhc1-card-detect", data); + return request_irq(gpio_to_irq(IMX_GPIO_NR(6, 8)), detect_irq, + IRQF_TRIGGER_FALLING, "sdhc1-card-detect", data); } static void mxt_td60_sdhc1_exit(struct device *dev, void *data) { - free_irq(IRQ_GPIOF(8), data); + free_irq(gpio_to_irq(IMX_GPIO_NR(6, 8)), data); } static const struct imxmmc_platform_data sdhc1_pdata __initconst = { diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index d37ed25003b2..de8516b7d69f 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -36,7 +36,6 @@ #include <mach/hardware.h> #include <mach/iomux-mx27.h> #include <asm/mach/time.h> -#include <mach/irqs.h> #include <mach/ulpi.h> #include "devices-imx27.h" @@ -245,7 +244,7 @@ static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq, { int ret; - ret = request_irq(IRQ_GPIOC(29), detect_irq, + ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "imx-mmc-detect", data); if (ret) @@ -257,7 +256,7 @@ static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq, static void pca100_sdhc2_exit(struct device *dev, void *data) { - free_irq(IRQ_GPIOC(29), data); + free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data); } static const struct imxmmc_platform_data sdhc_pdata __initconst = { diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index cd48712a6f50..e3c45130fb3c 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -225,8 +225,7 @@ static struct resource smsc911x_resources[] = { .end = MX31_CS1_BASE_ADDR + 0x300 + SZ_64K - 1, .flags = IORESOURCE_MEM, }, { - .start = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), - .end = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, }; @@ -371,7 +370,7 @@ static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq, gpio_direction_input(SDHC1_GPIO_WP); #endif - ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), detect_irq, + ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), detect_irq, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "sdhc-detect", data); if (ret) @@ -391,7 +390,7 @@ err_gpio_free: static void pcm970_sdhc1_exit(struct device *dev, void *data) { - free_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), data); + free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), data); gpio_free(SDHC1_GPIO_DET); gpio_free(SDHC1_GPIO_WP); } @@ -442,10 +441,6 @@ static struct platform_device *devices[] __initdata = { &pcm037_mt9v022, }; -static const struct ipu_platform_data mx3_ipu_data __initconst = { - .irq_base = MXC_IPU_IRQ_START, -}; - static const struct fb_videomode fb_modedb[] = { { /* 240x320 @ 60 Hz Sharp */ @@ -511,8 +506,7 @@ static struct resource pcm970_sja1000_resources[] = { .end = MX31_CS5_BASE_ADDR + 0x100 - 1, .flags = IORESOURCE_MEM, }, { - .start = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)), - .end = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; @@ -633,6 +627,10 @@ static void __init pcm037_init(void) pr_warning("could not get LAN irq gpio\n"); else { gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); + smsc911x_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); + smsc911x_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)); platform_device_register(&pcm037_eth); } @@ -646,7 +644,7 @@ static void __init pcm037_init(void) imx31_add_mxc_nand(&pcm037_nand_board_info); imx31_add_mxc_mmc(0, &sdhc_pdata); - imx31_add_ipu_core(&mx3_ipu_data); + imx31_add_ipu_core(); imx31_add_mx3_sdc_fb(&mx3fb_pdata); /* CSI */ @@ -659,6 +657,10 @@ static void __init pcm037_init(void) pcm037_init_camera(); + pcm970_sja1000_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105))); + pcm970_sja1000_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(IOMUX_PIN(48, 105))); platform_device_register(&pcm970_sja1000); if (otg_mode_host) { diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 3fbb89d74fcc..95f49d936fd3 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -27,6 +27,7 @@ #include <linux/mfd/mc13783.h> #include <linux/spi/spi.h> #include <linux/irq.h> +#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -274,7 +275,7 @@ static struct mc13xxx_platform_data pcm038_pmic = { static struct spi_board_info pcm038_spi_board_info[] __initdata = { { .modalias = "mc13783", - .irq = IRQ_GPIOB(23), + /* irq number is run-time assigned */ .max_speed_hz = 300000, .bus_num = 0, .chip_select = 0, @@ -325,6 +326,7 @@ static void __init pcm038_init(void) mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN); imx27_add_spi_imx0(&pcm038_spi0_data); + pcm038_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(2, 23)); spi_register_board_info(pcm038_spi_board_info, ARRAY_SIZE(pcm038_spi_board_info)); diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index 1f20f222375e..e4bd4387e344 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -76,10 +76,6 @@ static const struct fb_videomode fb_modedb[] = { }, }; -static const struct ipu_platform_data mx3_ipu_data __initconst = { - .irq_base = MXC_IPU_IRQ_START, -}; - static struct mx3fb_platform_data mx3fb_pdata __initdata = { .name = "Sharp-LQ035Q7", .mode = fb_modedb, @@ -376,7 +372,7 @@ static void __init pcm043_init(void) imx35_add_imx_i2c0(&pcm043_i2c0_data); - imx35_add_ipu_core(&mx3_ipu_data); + imx35_add_ipu_core(); imx35_add_mx3_sdc_fb(&mx3fb_pdata); if (otg_mode_host) { diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index a13087b11a6e..fb25fbd31226 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -22,7 +22,6 @@ #include <linux/gpio.h> #include <mach/hardware.h> -#include <mach/irqs.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> @@ -51,8 +50,6 @@ (QONG_FPGA_BASEADDR + QONG_DNET_ID * QONG_FPGA_PERIPH_SIZE) #define QONG_DNET_SIZE 0x00001000 -#define QONG_FPGA_IRQ IOMUX_TO_IRQ(MX31_PIN_DTR_DCE1) - static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -78,8 +75,7 @@ static struct resource dnet_resources[] = { .end = QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1, .flags = IORESOURCE_MEM, }, { - .start = QONG_FPGA_IRQ, - .end = QONG_FPGA_IRQ, + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ, }, }; @@ -95,6 +91,10 @@ static int __init qong_init_dnet(void) { int ret; + dnet_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)); + dnet_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)); ret = platform_device_register(&dnet_device); return ret; } diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c index cb9ceae2f648..67ff38e9a3ca 100644 --- a/arch/arm/mach-imx/mach-scb9328.c +++ b/arch/arm/mach-imx/mach-scb9328.c @@ -14,6 +14,7 @@ #include <linux/mtd/physmap.h> #include <linux/interrupt.h> #include <linux/dm9000.h> +#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -21,7 +22,6 @@ #include <mach/common.h> #include <mach/hardware.h> -#include <mach/irqs.h> #include <mach/iomux-mx1.h> #include "devices-imx1.h" @@ -78,8 +78,7 @@ static struct resource dm9000x_resources[] = { .end = MX1_CS5_PHYS + 5, .flags = IORESOURCE_MEM, /* data access */ }, { - .start = IRQ_GPIOC(3), - .end = IRQ_GPIOC(3), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, }; @@ -123,6 +122,8 @@ static void __init scb9328_init(void) imx1_add_imx_uart0(&uart_pdata); printk(KERN_INFO"Scb9328: Adding devices\n"); + dm9000x_resources[2].start = gpio_to_irq(IMX_GPIO_NR(3, 3)); + dm9000x_resources[2].end = gpio_to_irq(IMX_GPIO_NR(3, 3)); platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c index b26209d4bcef..39eb7960e2a4 100644 --- a/arch/arm/mach-imx/mach-vpr200.c +++ b/arch/arm/mach-imx/mach-vpr200.c @@ -31,7 +31,6 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-mx35.h> -#include <mach/irqs.h> #include <linux/i2c.h> #include <linux/i2c/at24.h> @@ -87,10 +86,6 @@ static const struct fb_videomode fb_modedb[] = { } }; -static const struct ipu_platform_data mx3_ipu_data __initconst = { - .irq_base = MXC_IPU_IRQ_START, -}; - static struct mx3fb_platform_data mx3fb_pdata __initdata = { .name = "PT0708048", .mode = fb_modedb, @@ -162,7 +157,7 @@ static struct i2c_board_info vpr200_i2c_devices[] = { }, { I2C_BOARD_INFO("mc13892", 0x08), .platform_data = &vpr200_pmic, - .irq = IMX_GPIO_TO_IRQ(GPIO_PMIC_INT), + /* irq number is run-time assigned */ } }; @@ -290,7 +285,7 @@ static void __init vpr200_board_init(void) imx35_add_imx_uart0(NULL); imx35_add_imx_uart2(NULL); - imx35_add_ipu_core(&mx3_ipu_data); + imx35_add_ipu_core(); imx35_add_mx3_sdc_fb(&mx3fb_pdata); imx35_add_fsl_usb2_udc(&otg_device_pdata); @@ -299,6 +294,7 @@ static void __init vpr200_board_init(void) imx35_add_mxc_nand(&vpr200_nand_board_info); imx35_add_sdhci_esdhc_imx(0, NULL); + vpr200_i2c_devices[1].irq = gpio_to_irq(GPIO_PMIC_INT); i2c_register_board_info(0, vpr200_i2c_devices, ARRAY_SIZE(vpr200_i2c_devices)); diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c index fcafd3dafb8c..6d60d51868bc 100644 --- a/arch/arm/mach-imx/mm-imx1.c +++ b/arch/arm/mach-imx/mm-imx1.c @@ -24,7 +24,6 @@ #include <mach/common.h> #include <mach/hardware.h> -#include <mach/irqs.h> #include <mach/iomux-v1.h> static struct map_desc imx_io_desc[] __initdata = { diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c index 5f43905e5290..d056dad0940d 100644 --- a/arch/arm/mach-imx/mm-imx21.c +++ b/arch/arm/mach-imx/mm-imx21.c @@ -26,7 +26,6 @@ #include <mach/devices-common.h> #include <asm/pgtable.h> #include <asm/mach/map.h> -#include <mach/irqs.h> #include <mach/iomux-v1.h> /* MX21 memory map definition */ diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c index 6ff37140a4f8..388928fdb11a 100644 --- a/arch/arm/mach-imx/mm-imx25.c +++ b/arch/arm/mach-imx/mm-imx25.c @@ -29,7 +29,6 @@ #include <mach/hardware.h> #include <mach/mx25.h> #include <mach/iomux-v3.h> -#include <mach/irqs.h> /* * This table defines static virtual address mappings for I/O regions. diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c index 25662558e018..e7e24afc45ed 100644 --- a/arch/arm/mach-imx/mm-imx27.c +++ b/arch/arm/mach-imx/mm-imx27.c @@ -26,7 +26,6 @@ #include <mach/devices-common.h> #include <asm/pgtable.h> #include <asm/mach/map.h> -#include <mach/irqs.h> #include <mach/iomux-v1.h> /* MX27 memory map definition */ diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index a8983b9778d1..fe96105109b3 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -30,7 +30,6 @@ #include <mach/devices-common.h> #include <mach/hardware.h> #include <mach/iomux-v3.h> -#include <mach/irqs.h> #include "crmregs-imx3.h" diff --git a/arch/arm/mach-imx/mx31lilly-db.c b/arch/arm/mach-imx/mx31lilly-db.c index 7d26f766a4ee..29e890f92055 100644 --- a/arch/arm/mach-imx/mx31lilly-db.c +++ b/arch/arm/mach-imx/mx31lilly-db.c @@ -130,7 +130,8 @@ static int mxc_mmc1_init(struct device *dev, gpio_direction_input(gpio_det); gpio_direction_input(gpio_wp); - ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), detect_irq, + ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)), + detect_irq, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "MMC detect", data); if (ret) @@ -151,7 +152,7 @@ static void mxc_mmc1_exit(struct device *dev, void *data) { gpio_free(gpio_det); gpio_free(gpio_wp); - free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data); + free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)), data); } static const struct imxmmc_platform_data mmc_pdata __initconst = { @@ -161,10 +162,6 @@ static const struct imxmmc_platform_data mmc_pdata __initconst = { }; /* Framebuffer support */ -static const struct ipu_platform_data ipu_data __initconst = { - .irq_base = MXC_IPU_IRQ_START, -}; - static const struct fb_videomode fb_modedb = { /* 640x480 TFT panel (IPS-056T) */ .name = "CRT-VGA", @@ -198,7 +195,7 @@ static void __init mx31lilly_init_fb(void) return; } - imx31_add_ipu_core(&ipu_data); + imx31_add_ipu_core(); imx31_add_mx3_sdc_fb(&fb_pdata); gpio_direction_output(LCD_VCC_EN_GPIO, 1); } diff --git a/arch/arm/mach-imx/mx31lite-db.c b/arch/arm/mach-imx/mx31lite-db.c index fa60ef6ac7ff..83d17d9e0bc8 100644 --- a/arch/arm/mach-imx/mx31lite-db.c +++ b/arch/arm/mach-imx/mx31lite-db.c @@ -116,7 +116,8 @@ static int mxc_mmc1_init(struct device *dev, gpio_direction_input(gpio_det); gpio_direction_input(gpio_wp); - ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), detect_irq, + ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)), + detect_irq, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "MMC detect", data); if (ret) @@ -137,7 +138,7 @@ static void mxc_mmc1_exit(struct device *dev, void *data) { gpio_free(gpio_det); gpio_free(gpio_wp); - free_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), data); + free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)), data); } static const struct imxmmc_platform_data mmc_pdata __initconst = { diff --git a/arch/arm/mach-imx/mx51_efika.c b/arch/arm/mach-imx/mx51_efika.c index ec6ca91b299b..ee870c49bc63 100644 --- a/arch/arm/mach-imx/mx51_efika.c +++ b/arch/arm/mach-imx/mx51_efika.c @@ -587,7 +587,7 @@ static struct spi_board_info mx51_efika_spi_board_info[] __initdata = { .bus_num = 0, .chip_select = 0, .platform_data = &mx51_efika_mc13892_data, - .irq = IMX_GPIO_TO_IRQ(EFIKAMX_PMIC), + /* irq number is run-time assigned */ }, }; @@ -620,6 +620,7 @@ void __init efika_board_common_init(void) gpio_request(EFIKAMX_PMIC, "pmic irq"); gpio_direction_input(EFIKAMX_PMIC); + mx51_efika_spi_board_info[1].irq = gpio_to_irq(EFIKAMX_PMIC); spi_register_board_info(mx51_efika_spi_board_info, ARRAY_SIZE(mx51_efika_spi_board_info)); imx51_add_ecspi(0, &mx51_efika_spi_pdata); diff --git a/arch/arm/mach-imx/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c index 99afbc3f43a3..9917e2ff51da 100644 --- a/arch/arm/mach-imx/pcm970-baseboard.c +++ b/arch/arm/mach-imx/pcm970-baseboard.c @@ -95,14 +95,14 @@ static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void { int ret; - ret = request_irq(IRQ_GPIOC(29), detect_irq, IRQF_TRIGGER_FALLING, - "imx-mmc-detect", data); + ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq, + IRQF_TRIGGER_FALLING, "imx-mmc-detect", data); if (ret) return ret; ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro"); if (ret) { - free_irq(IRQ_GPIOC(29), data); + free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data); return ret; } @@ -113,7 +113,7 @@ static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void static void pcm970_sdhc2_exit(struct device *dev, void *data) { - free_irq(IRQ_GPIOC(29), data); + free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data); gpio_free(GPIO_PORTC + 28); } @@ -192,8 +192,7 @@ static struct resource pcm970_sja1000_resources[] = { .end = MX27_CS4_BASE_ADDR + 0x100 - 1, .flags = IORESOURCE_MEM, }, { - .start = IRQ_GPIOE(19), - .end = IRQ_GPIOE(19), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, }, }; @@ -227,5 +226,7 @@ void __init pcm970_baseboard_init(void) imx27_add_imx_fb(&pcm038_fb_data); mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN); imx27_add_mxc_mmc(1, &sdhc_pdata); + pcm970_sja1000_resources[1].start = gpio_to_irq(IMX_GPIO_NR(5, 19)); + pcm970_sja1000_resources[1].end = gpio_to_irq(IMX_GPIO_NR(5, 19)); platform_device_register(&pcm970_sja1000); } diff --git a/arch/arm/mach-rpc/irq.c b/arch/arm/mach-rpc/irq.c index cf0e669eaf1a..3e4fa849c64d 100644 --- a/arch/arm/mach-rpc/irq.c +++ b/arch/arm/mach-rpc/irq.c @@ -163,6 +163,6 @@ void __init rpc_init_irq(void) } } - init_FIQ(); + init_FIQ(FIQ_START); } diff --git a/arch/arm/plat-mxc/3ds_debugboard.c b/arch/arm/plat-mxc/3ds_debugboard.c index 5cac2c540f4f..5c10ad05df74 100644 --- a/arch/arm/plat-mxc/3ds_debugboard.c +++ b/arch/arm/plat-mxc/3ds_debugboard.c @@ -12,9 +12,11 @@ #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/irqdomain.h> #include <linux/io.h> #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/module.h> #include <linux/smsc911x.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> @@ -48,27 +50,22 @@ /* CPU ID and Personality ID */ #define MCU_BOARD_ID_REG 0x68 -#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_BOARD_IRQ_START) -#define MXC_IRQ_TO_GPIO(irq) ((irq) - MXC_INTERNAL_IRQS) - -#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START) #define MXC_MAX_EXP_IO_LINES 16 /* interrupts like external uart , external ethernet etc*/ -#define EXPIO_INT_ENET (MXC_BOARD_IRQ_START + 0) -#define EXPIO_INT_XUART_A (MXC_BOARD_IRQ_START + 1) -#define EXPIO_INT_XUART_B (MXC_BOARD_IRQ_START + 2) -#define EXPIO_INT_BUTTON_A (MXC_BOARD_IRQ_START + 3) -#define EXPIO_INT_BUTTON_B (MXC_BOARD_IRQ_START + 4) +#define EXPIO_INT_ENET 0 +#define EXPIO_INT_XUART_A 1 +#define EXPIO_INT_XUART_B 2 +#define EXPIO_INT_BUTTON_A 3 +#define EXPIO_INT_BUTTON_B 4 static void __iomem *brd_io; +static struct irq_domain *domain; static struct resource smsc911x_resources[] = { { .flags = IORESOURCE_MEM, } , { - .start = EXPIO_INT_ENET, - .end = EXPIO_INT_ENET, .flags = IORESOURCE_IRQ, }, }; @@ -100,11 +97,11 @@ static void mxc_expio_irq_handler(u32 irq, struct irq_desc *desc) imr_val = __raw_readw(brd_io + INTR_MASK_REG); int_valid = __raw_readw(brd_io + INTR_STATUS_REG) & ~imr_val; - expio_irq = MXC_BOARD_IRQ_START; + expio_irq = 0; for (; int_valid != 0; int_valid >>= 1, expio_irq++) { if ((int_valid & 1) == 0) continue; - generic_handle_irq(expio_irq); + generic_handle_irq(irq_find_mapping(domain, expio_irq)); } desc->irq_data.chip->irq_ack(&desc->irq_data); @@ -118,7 +115,7 @@ static void mxc_expio_irq_handler(u32 irq, struct irq_desc *desc) static void expio_mask_irq(struct irq_data *d) { u16 reg; - u32 expio = MXC_IRQ_TO_EXPIO(d->irq); + u32 expio = d->hwirq; reg = __raw_readw(brd_io + INTR_MASK_REG); reg |= (1 << expio); @@ -127,7 +124,7 @@ static void expio_mask_irq(struct irq_data *d) static void expio_ack_irq(struct irq_data *d) { - u32 expio = MXC_IRQ_TO_EXPIO(d->irq); + u32 expio = d->hwirq; __raw_writew(1 << expio, brd_io + INTR_RESET_REG); __raw_writew(0, brd_io + INTR_RESET_REG); @@ -137,7 +134,7 @@ static void expio_ack_irq(struct irq_data *d) static void expio_unmask_irq(struct irq_data *d) { u16 reg; - u32 expio = MXC_IRQ_TO_EXPIO(d->irq); + u32 expio = d->hwirq; reg = __raw_readw(brd_io + INTR_MASK_REG); reg &= ~(1 << expio); @@ -155,8 +152,10 @@ static struct regulator_consumer_supply dummy_supplies[] = { REGULATOR_SUPPLY("vddvario", "smsc911x"), }; -int __init mxc_expio_init(u32 base, u32 p_irq) +int __init mxc_expio_init(u32 base, u32 intr_gpio) { + u32 p_irq = gpio_to_irq(intr_gpio); + int irq_base; int i; brd_io = ioremap(BOARD_IO_ADDR(base), SZ_4K); @@ -178,16 +177,23 @@ int __init mxc_expio_init(u32 base, u32 p_irq) /* * Configure INT line as GPIO input */ - gpio_request(MXC_IRQ_TO_GPIO(p_irq), "expio_pirq"); - gpio_direction_input(MXC_IRQ_TO_GPIO(p_irq)); + gpio_request(intr_gpio, "expio_pirq"); + gpio_direction_input(intr_gpio); /* disable the interrupt and clear the status */ __raw_writew(0, brd_io + INTR_MASK_REG); __raw_writew(0xFFFF, brd_io + INTR_RESET_REG); __raw_writew(0, brd_io + INTR_RESET_REG); __raw_writew(0x1F, brd_io + INTR_MASK_REG); - for (i = MXC_EXP_IO_BASE; - i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES); i++) { + + irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id()); + WARN_ON(irq_base < 0); + + domain = irq_domain_add_legacy(NULL, MXC_MAX_EXP_IO_LINES, irq_base, 0, + &irq_domain_simple_ops, NULL); + WARN_ON(!domain); + + for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) { irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq); set_irq_flags(i, IRQF_VALID); } @@ -199,6 +205,8 @@ int __init mxc_expio_init(u32 base, u32 p_irq) smsc911x_resources[0].start = LAN9217_BASE_ADDR(base); smsc911x_resources[0].end = LAN9217_BASE_ADDR(base) + 0x100 - 1; + smsc911x_resources[1].start = irq_find_mapping(domain, EXPIO_INT_ENET); + smsc911x_resources[1].end = irq_find_mapping(domain, EXPIO_INT_ENET); platform_device_register(&smsc_lan9217_device); return 0; diff --git a/arch/arm/plat-mxc/avic.c b/arch/arm/plat-mxc/avic.c index 689f81f9593b..cbd55c36def3 100644 --- a/arch/arm/plat-mxc/avic.c +++ b/arch/arm/plat-mxc/avic.c @@ -19,11 +19,14 @@ #include <linux/module.h> #include <linux/irq.h> +#include <linux/irqdomain.h> #include <linux/io.h> +#include <linux/of.h> #include <mach/common.h> #include <asm/mach/irq.h> #include <asm/exception.h> #include <mach/hardware.h> +#include <mach/irqs.h> #include "irq-common.h" @@ -50,15 +53,19 @@ #define AVIC_NUM_IRQS 64 void __iomem *avic_base; +static struct irq_domain *domain; static u32 avic_saved_mask_reg[2]; #ifdef CONFIG_MXC_IRQ_PRIOR static int avic_irq_set_priority(unsigned char irq, unsigned char prio) { + struct irq_data *d = irq_get_irq_data(irq); unsigned int temp; unsigned int mask = 0x0F << irq % 8 * 4; + irq = d->hwirq; + if (irq >= AVIC_NUM_IRQS) return -EINVAL; @@ -75,8 +82,11 @@ static int avic_irq_set_priority(unsigned char irq, unsigned char prio) #ifdef CONFIG_FIQ static int avic_set_irq_fiq(unsigned int irq, unsigned int type) { + struct irq_data *d = irq_get_irq_data(irq); unsigned int irqt; + irq = d->hwirq; + if (irq >= AVIC_NUM_IRQS) return -EINVAL; @@ -108,7 +118,7 @@ static void avic_irq_suspend(struct irq_data *d) { struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); struct irq_chip_type *ct = gc->chip_types; - int idx = gc->irq_base >> 5; + int idx = d->hwirq >> 5; avic_saved_mask_reg[idx] = __raw_readl(avic_base + ct->regs.mask); __raw_writel(gc->wake_active, avic_base + ct->regs.mask); @@ -118,7 +128,7 @@ static void avic_irq_resume(struct irq_data *d) { struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); struct irq_chip_type *ct = gc->chip_types; - int idx = gc->irq_base >> 5; + int idx = d->hwirq >> 5; __raw_writel(avic_saved_mask_reg[idx], avic_base + ct->regs.mask); } @@ -128,11 +138,10 @@ static void avic_irq_resume(struct irq_data *d) #define avic_irq_resume NULL #endif -static __init void avic_init_gc(unsigned int irq_start) +static __init void avic_init_gc(int idx, unsigned int irq_start) { struct irq_chip_generic *gc; struct irq_chip_type *ct; - int idx = irq_start >> 5; gc = irq_alloc_generic_chip("mxc-avic", 1, irq_start, avic_base, handle_level_irq); @@ -161,7 +170,7 @@ asmlinkage void __exception_irq_entry avic_handle_irq(struct pt_regs *regs) if (nivector == 0xffff) break; - handle_IRQ(nivector, regs); + handle_IRQ(irq_find_mapping(domain, nivector), regs); } while (1); } @@ -172,6 +181,8 @@ asmlinkage void __exception_irq_entry avic_handle_irq(struct pt_regs *regs) */ void __init mxc_init_irq(void __iomem *irqbase) { + struct device_node *np; + int irq_base; int i; avic_base = irqbase; @@ -190,8 +201,16 @@ void __init mxc_init_irq(void __iomem *irqbase) __raw_writel(0, avic_base + AVIC_INTTYPEH); __raw_writel(0, avic_base + AVIC_INTTYPEL); - for (i = 0; i < AVIC_NUM_IRQS; i += 32) - avic_init_gc(i); + irq_base = irq_alloc_descs(-1, 0, AVIC_NUM_IRQS, numa_node_id()); + WARN_ON(irq_base < 0); + + np = of_find_compatible_node(NULL, NULL, "fsl,avic"); + domain = irq_domain_add_legacy(np, AVIC_NUM_IRQS, irq_base, 0, + &irq_domain_simple_ops, NULL); + WARN_ON(!domain); + + for (i = 0; i < AVIC_NUM_IRQS / 32; i++, irq_base += 32) + avic_init_gc(i, irq_base); /* Set default priority value (0) for all IRQ's */ for (i = 0; i < 8; i++) @@ -199,7 +218,7 @@ void __init mxc_init_irq(void __iomem *irqbase) #ifdef CONFIG_FIQ /* Initialize FIQ */ - init_FIQ(); + init_FIQ(FIQ_START); #endif printk(KERN_INFO "MXC IRQ initialized\n"); diff --git a/arch/arm/plat-mxc/devices/platform-ipu-core.c b/arch/arm/plat-mxc/devices/platform-ipu-core.c index 79d340ae0af1..d1e33cc6f12e 100644 --- a/arch/arm/plat-mxc/devices/platform-ipu-core.c +++ b/arch/arm/plat-mxc/devices/platform-ipu-core.c @@ -30,8 +30,7 @@ const struct imx_ipu_core_data imx35_ipu_core_data __initconst = static struct platform_device *imx_ipu_coredev __initdata; struct platform_device *__init imx_add_ipu_core( - const struct imx_ipu_core_data *data, - const struct ipu_platform_data *pdata) + const struct imx_ipu_core_data *data) { /* The resource order is important! */ struct resource res[] = { @@ -55,7 +54,7 @@ struct platform_device *__init imx_add_ipu_core( }; return imx_ipu_coredev = imx_add_platform_device("ipu-core", -1, - res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); + res, ARRAY_SIZE(res), NULL, 0); } struct platform_device *__init imx_alloc_mx3_camera( diff --git a/arch/arm/plat-mxc/include/mach/3ds_debugboard.h b/arch/arm/plat-mxc/include/mach/3ds_debugboard.h index a384fdd49c62..9fd6cb3f8fad 100644 --- a/arch/arm/plat-mxc/include/mach/3ds_debugboard.h +++ b/arch/arm/plat-mxc/include/mach/3ds_debugboard.h @@ -13,6 +13,6 @@ #ifndef __ASM_ARCH_MXC_3DS_DB_H__ #define __ASM_ARCH_MXC_3DS_DB_H__ -extern int __init mxc_expio_init(u32 base, u32 p_irq); +extern int __init mxc_expio_init(u32 base, u32 intr_gpio); #endif /* __ASM_ARCH_MXC_3DS_DB_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h index 1b2258daa05b..a7f5bb1084d7 100644 --- a/arch/arm/plat-mxc/include/mach/devices-common.h +++ b/arch/arm/plat-mxc/include/mach/devices-common.h @@ -183,7 +183,6 @@ struct platform_device *__init imx_add_imx_udc( const struct imx_imx_udc_data *data, const struct imxusb_platform_data *pdata); -#include <mach/ipu.h> #include <mach/mx3fb.h> #include <mach/mx3_camera.h> struct imx_ipu_core_data { @@ -192,8 +191,7 @@ struct imx_ipu_core_data { resource_size_t errirq; }; struct platform_device *__init imx_add_ipu_core( - const struct imx_ipu_core_data *data, - const struct ipu_platform_data *pdata); + const struct imx_ipu_core_data *data); struct platform_device *__init imx_alloc_mx3_camera( const struct imx_ipu_core_data *data, const struct mx3_camera_pdata *pdata); diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h index 0630513554de..1d432a75e409 100644 --- a/arch/arm/plat-mxc/include/mach/hardware.h +++ b/arch/arm/plat-mxc/include/mach/hardware.h @@ -128,6 +128,4 @@ /* range e.g. GPIO_1_5 is gpio 5 under linux */ #define IMX_GPIO_NR(bank, nr) (((bank) - 1) * 32 + (nr)) -#define IMX_GPIO_TO_IRQ(gpio) (MXC_GPIO_IRQ_START + (gpio)) - #endif /* __ASM_ARCH_MXC_HARDWARE_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h index 63f22a009a65..d8b65b51f2a9 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h @@ -160,9 +160,6 @@ int mxc_iomux_mode(unsigned int pin_mode); #define IOMUX_TO_GPIO(iomux_pin) \ ((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) -#define IOMUX_TO_IRQ(iomux_pin) \ - (((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) + \ - MXC_GPIO_IRQ_START) /* * This enumeration is constructed based on the Section diff --git a/arch/arm/plat-mxc/include/mach/iomux-v1.h b/arch/arm/plat-mxc/include/mach/iomux-v1.h index f7d18046c04f..02651a40fe23 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-v1.h +++ b/arch/arm/plat-mxc/include/mach/iomux-v1.h @@ -85,13 +85,6 @@ #define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT) #define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT) -#define IRQ_GPIOA(x) (MXC_GPIO_IRQ_START + x) -#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x) -#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x) -#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x) -#define IRQ_GPIOE(x) (IRQ_GPIOD(32) + x) -#define IRQ_GPIOF(x) (IRQ_GPIOE(32) + x) - extern int mxc_gpio_mode(int gpio_mode); extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, const char *label); diff --git a/arch/arm/plat-mxc/include/mach/ipu.h b/arch/arm/plat-mxc/include/mach/ipu.h index a9221f1cc1a0..539e559d18b2 100644 --- a/arch/arm/plat-mxc/include/mach/ipu.h +++ b/arch/arm/plat-mxc/include/mach/ipu.h @@ -110,10 +110,6 @@ enum ipu_rotate_mode { IPU_ROTATE_90_LEFT = 7, }; -struct ipu_platform_data { - unsigned int irq_base; -}; - /* * Enumeration of DI ports for ADC. */ diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h index fd9efb044656..d73f5e8ea9cb 100644 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ b/arch/arm/plat-mxc/include/mach/irqs.h @@ -11,50 +11,6 @@ #ifndef __ASM_ARCH_MXC_IRQS_H__ #define __ASM_ARCH_MXC_IRQS_H__ -#include <asm-generic/gpio.h> - -/* - * SoCs with GIC interrupt controller have 160 IRQs, those with TZIC - * have 128 IRQs, and those with AVIC have 64. - * - * To support single image, the biggest number should be defined on - * top of the list. - */ -#if defined CONFIG_ARM_GIC -#define MXC_INTERNAL_IRQS 160 -#elif defined CONFIG_MXC_TZIC -#define MXC_INTERNAL_IRQS 128 -#else -#define MXC_INTERNAL_IRQS 64 -#endif - -#define MXC_GPIO_IRQ_START MXC_INTERNAL_IRQS - -/* - * The next 16 interrupts are for board specific purposes. Since - * the kernel can only run on one machine at a time, we can re-use - * these. If you need more, increase MXC_BOARD_IRQS, but keep it - * within sensible limits. - */ -#define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + ARCH_NR_GPIOS) - -#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 -#define MXC_BOARD_IRQS 80 -#else -#define MXC_BOARD_IRQS 16 -#endif - -#define MXC_IPU_IRQ_START (MXC_BOARD_IRQ_START + MXC_BOARD_IRQS) - -#ifdef CONFIG_MX3_IPU_IRQS -#define MX3_IPU_IRQS CONFIG_MX3_IPU_IRQS -#else -#define MX3_IPU_IRQS 0 -#endif -/* REVISIT: Add IPU irqs on IMX51 */ - -#define NR_IRQS (MXC_IPU_IRQ_START + MX3_IPU_IRQS) - extern int imx_irq_set_priority(unsigned char irq, unsigned char prio); /* all normal IRQs can be FIQs */ diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h index 2b7c08d13e89..45bd31cc34d6 100644 --- a/arch/arm/plat-mxc/include/mach/mx1.h +++ b/arch/arm/plat-mxc/include/mach/mx1.h @@ -78,61 +78,62 @@ #define MX1_IO_ADDRESS(x) IOMEM(MX1_IO_P2V(x)) /* fixed interrput numbers */ -#define MX1_INT_SOFTINT 0 -#define MX1_INT_CSI 6 -#define MX1_DSPA_MAC_INT 7 -#define MX1_DSPA_INT 8 -#define MX1_COMP_INT 9 -#define MX1_MSHC_XINT 10 -#define MX1_GPIO_INT_PORTA 11 -#define MX1_GPIO_INT_PORTB 12 -#define MX1_GPIO_INT_PORTC 13 -#define MX1_INT_LCDC 14 -#define MX1_SIM_INT 15 -#define MX1_SIM_DATA_INT 16 -#define MX1_RTC_INT 17 -#define MX1_RTC_SAMINT 18 -#define MX1_INT_UART2PFERR 19 -#define MX1_INT_UART2RTS 20 -#define MX1_INT_UART2DTR 21 -#define MX1_INT_UART2UARTC 22 -#define MX1_INT_UART2TX 23 -#define MX1_INT_UART2RX 24 -#define MX1_INT_UART1PFERR 25 -#define MX1_INT_UART1RTS 26 -#define MX1_INT_UART1DTR 27 -#define MX1_INT_UART1UARTC 28 -#define MX1_INT_UART1TX 29 -#define MX1_INT_UART1RX 30 -#define MX1_VOICE_DAC_INT 31 -#define MX1_VOICE_ADC_INT 32 -#define MX1_PEN_DATA_INT 33 -#define MX1_PWM_INT 34 -#define MX1_SDHC_INT 35 -#define MX1_INT_I2C 39 -#define MX1_INT_CSPI2 40 -#define MX1_INT_CSPI1 41 -#define MX1_SSI_TX_INT 42 -#define MX1_SSI_TX_ERR_INT 43 -#define MX1_SSI_RX_INT 44 -#define MX1_SSI_RX_ERR_INT 45 -#define MX1_TOUCH_INT 46 -#define MX1_INT_USBD0 47 -#define MX1_INT_USBD1 48 -#define MX1_INT_USBD2 49 -#define MX1_INT_USBD3 50 -#define MX1_INT_USBD4 51 -#define MX1_INT_USBD5 52 -#define MX1_INT_USBD6 53 -#define MX1_BTSYS_INT 55 -#define MX1_BTTIM_INT 56 -#define MX1_BTWUI_INT 57 -#define MX1_TIM2_INT 58 -#define MX1_TIM1_INT 59 -#define MX1_DMA_ERR 60 -#define MX1_DMA_INT 61 -#define MX1_GPIO_INT_PORTD 62 -#define MX1_WDT_INT 63 +#include <asm/irq.h> +#define MX1_INT_SOFTINT (NR_IRQS_LEGACY + 0) +#define MX1_INT_CSI (NR_IRQS_LEGACY + 6) +#define MX1_DSPA_MAC_INT (NR_IRQS_LEGACY + 7) +#define MX1_DSPA_INT (NR_IRQS_LEGACY + 8) +#define MX1_COMP_INT (NR_IRQS_LEGACY + 9) +#define MX1_MSHC_XINT (NR_IRQS_LEGACY + 10) +#define MX1_GPIO_INT_PORTA (NR_IRQS_LEGACY + 11) +#define MX1_GPIO_INT_PORTB (NR_IRQS_LEGACY + 12) +#define MX1_GPIO_INT_PORTC (NR_IRQS_LEGACY + 13) +#define MX1_INT_LCDC (NR_IRQS_LEGACY + 14) +#define MX1_SIM_INT (NR_IRQS_LEGACY + 15) +#define MX1_SIM_DATA_INT (NR_IRQS_LEGACY + 16) +#define MX1_RTC_INT (NR_IRQS_LEGACY + 17) +#define MX1_RTC_SAMINT (NR_IRQS_LEGACY + 18) +#define MX1_INT_UART2PFERR (NR_IRQS_LEGACY + 19) +#define MX1_INT_UART2RTS (NR_IRQS_LEGACY + 20) +#define MX1_INT_UART2DTR (NR_IRQS_LEGACY + 21) +#define MX1_INT_UART2UARTC (NR_IRQS_LEGACY + 22) +#define MX1_INT_UART2TX (NR_IRQS_LEGACY + 23) +#define MX1_INT_UART2RX (NR_IRQS_LEGACY + 24) +#define MX1_INT_UART1PFERR (NR_IRQS_LEGACY + 25) +#define MX1_INT_UART1RTS (NR_IRQS_LEGACY + 26) +#define MX1_INT_UART1DTR (NR_IRQS_LEGACY + 27) +#define MX1_INT_UART1UARTC (NR_IRQS_LEGACY + 28) +#define MX1_INT_UART1TX (NR_IRQS_LEGACY + 29) +#define MX1_INT_UART1RX (NR_IRQS_LEGACY + 30) +#define MX1_VOICE_DAC_INT (NR_IRQS_LEGACY + 31) +#define MX1_VOICE_ADC_INT (NR_IRQS_LEGACY + 32) +#define MX1_PEN_DATA_INT (NR_IRQS_LEGACY + 33) +#define MX1_PWM_INT (NR_IRQS_LEGACY + 34) +#define MX1_SDHC_INT (NR_IRQS_LEGACY + 35) +#define MX1_INT_I2C (NR_IRQS_LEGACY + 39) +#define MX1_INT_CSPI2 (NR_IRQS_LEGACY + 40) +#define MX1_INT_CSPI1 (NR_IRQS_LEGACY + 41) +#define MX1_SSI_TX_INT (NR_IRQS_LEGACY + 42) +#define MX1_SSI_TX_ERR_INT (NR_IRQS_LEGACY + 43) +#define MX1_SSI_RX_INT (NR_IRQS_LEGACY + 44) +#define MX1_SSI_RX_ERR_INT (NR_IRQS_LEGACY + 45) +#define MX1_TOUCH_INT (NR_IRQS_LEGACY + 46) +#define MX1_INT_USBD0 (NR_IRQS_LEGACY + 47) +#define MX1_INT_USBD1 (NR_IRQS_LEGACY + 48) +#define MX1_INT_USBD2 (NR_IRQS_LEGACY + 49) +#define MX1_INT_USBD3 (NR_IRQS_LEGACY + 50) +#define MX1_INT_USBD4 (NR_IRQS_LEGACY + 51) +#define MX1_INT_USBD5 (NR_IRQS_LEGACY + 52) +#define MX1_INT_USBD6 (NR_IRQS_LEGACY + 53) +#define MX1_BTSYS_INT (NR_IRQS_LEGACY + 55) +#define MX1_BTTIM_INT (NR_IRQS_LEGACY + 56) +#define MX1_BTWUI_INT (NR_IRQS_LEGACY + 57) +#define MX1_TIM2_INT (NR_IRQS_LEGACY + 58) +#define MX1_TIM1_INT (NR_IRQS_LEGACY + 59) +#define MX1_DMA_ERR (NR_IRQS_LEGACY + 60) +#define MX1_DMA_INT (NR_IRQS_LEGACY + 61) +#define MX1_GPIO_INT_PORTD (NR_IRQS_LEGACY + 62) +#define MX1_WDT_INT (NR_IRQS_LEGACY + 63) /* DMA */ #define MX1_DMA_REQ_UART3_T 2 diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h index 6cd049ebbd8d..468738aa997f 100644 --- a/arch/arm/plat-mxc/include/mach/mx21.h +++ b/arch/arm/plat-mxc/include/mach/mx21.h @@ -99,59 +99,60 @@ #define MX21_IO_ADDRESS(x) IOMEM(MX21_IO_P2V(x)) /* fixed interrupt numbers */ -#define MX21_INT_CSPI3 6 -#define MX21_INT_GPIO 8 -#define MX21_INT_FIRI 9 -#define MX21_INT_SDHC2 10 -#define MX21_INT_SDHC1 11 -#define MX21_INT_I2C 12 -#define MX21_INT_SSI2 13 -#define MX21_INT_SSI1 14 -#define MX21_INT_CSPI2 15 -#define MX21_INT_CSPI1 16 -#define MX21_INT_UART4 17 -#define MX21_INT_UART3 18 -#define MX21_INT_UART2 19 -#define MX21_INT_UART1 20 -#define MX21_INT_KPP 21 -#define MX21_INT_RTC 22 -#define MX21_INT_PWM 23 -#define MX21_INT_GPT3 24 -#define MX21_INT_GPT2 25 -#define MX21_INT_GPT1 26 -#define MX21_INT_WDOG 27 -#define MX21_INT_PCMCIA 28 -#define MX21_INT_NFC 29 -#define MX21_INT_BMI 30 -#define MX21_INT_CSI 31 -#define MX21_INT_DMACH0 32 -#define MX21_INT_DMACH1 33 -#define MX21_INT_DMACH2 34 -#define MX21_INT_DMACH3 35 -#define MX21_INT_DMACH4 36 -#define MX21_INT_DMACH5 37 -#define MX21_INT_DMACH6 38 -#define MX21_INT_DMACH7 39 -#define MX21_INT_DMACH8 40 -#define MX21_INT_DMACH9 41 -#define MX21_INT_DMACH10 42 -#define MX21_INT_DMACH11 43 -#define MX21_INT_DMACH12 44 -#define MX21_INT_DMACH13 45 -#define MX21_INT_DMACH14 46 -#define MX21_INT_DMACH15 47 -#define MX21_INT_EMMAENC 49 -#define MX21_INT_EMMADEC 50 -#define MX21_INT_EMMAPRP 51 -#define MX21_INT_EMMAPP 52 -#define MX21_INT_USBWKUP 53 -#define MX21_INT_USBDMA 54 -#define MX21_INT_USBHOST 55 -#define MX21_INT_USBFUNC 56 -#define MX21_INT_USBMNP 57 -#define MX21_INT_USBCTRL 58 -#define MX21_INT_SLCDC 60 -#define MX21_INT_LCDC 61 +#include <asm/irq.h> +#define MX21_INT_CSPI3 (NR_IRQS_LEGACY + 6) +#define MX21_INT_GPIO (NR_IRQS_LEGACY + 8) +#define MX21_INT_FIRI (NR_IRQS_LEGACY + 9) +#define MX21_INT_SDHC2 (NR_IRQS_LEGACY + 10) +#define MX21_INT_SDHC1 (NR_IRQS_LEGACY + 11) +#define MX21_INT_I2C (NR_IRQS_LEGACY + 12) +#define MX21_INT_SSI2 (NR_IRQS_LEGACY + 13) +#define MX21_INT_SSI1 (NR_IRQS_LEGACY + 14) +#define MX21_INT_CSPI2 (NR_IRQS_LEGACY + 15) +#define MX21_INT_CSPI1 (NR_IRQS_LEGACY + 16) +#define MX21_INT_UART4 (NR_IRQS_LEGACY + 17) +#define MX21_INT_UART3 (NR_IRQS_LEGACY + 18) +#define MX21_INT_UART2 (NR_IRQS_LEGACY + 19) +#define MX21_INT_UART1 (NR_IRQS_LEGACY + 20) +#define MX21_INT_KPP (NR_IRQS_LEGACY + 21) +#define MX21_INT_RTC (NR_IRQS_LEGACY + 22) +#define MX21_INT_PWM (NR_IRQS_LEGACY + 23) +#define MX21_INT_GPT3 (NR_IRQS_LEGACY + 24) +#define MX21_INT_GPT2 (NR_IRQS_LEGACY + 25) +#define MX21_INT_GPT1 (NR_IRQS_LEGACY + 26) +#define MX21_INT_WDOG (NR_IRQS_LEGACY + 27) +#define MX21_INT_PCMCIA (NR_IRQS_LEGACY + 28) +#define MX21_INT_NFC (NR_IRQS_LEGACY + 29) +#define MX21_INT_BMI (NR_IRQS_LEGACY + 30) +#define MX21_INT_CSI (NR_IRQS_LEGACY + 31) +#define MX21_INT_DMACH0 (NR_IRQS_LEGACY + 32) +#define MX21_INT_DMACH1 (NR_IRQS_LEGACY + 33) +#define MX21_INT_DMACH2 (NR_IRQS_LEGACY + 34) +#define MX21_INT_DMACH3 (NR_IRQS_LEGACY + 35) +#define MX21_INT_DMACH4 (NR_IRQS_LEGACY + 36) +#define MX21_INT_DMACH5 (NR_IRQS_LEGACY + 37) +#define MX21_INT_DMACH6 (NR_IRQS_LEGACY + 38) +#define MX21_INT_DMACH7 (NR_IRQS_LEGACY + 39) +#define MX21_INT_DMACH8 (NR_IRQS_LEGACY + 40) +#define MX21_INT_DMACH9 (NR_IRQS_LEGACY + 41) +#define MX21_INT_DMACH10 (NR_IRQS_LEGACY + 42) +#define MX21_INT_DMACH11 (NR_IRQS_LEGACY + 43) +#define MX21_INT_DMACH12 (NR_IRQS_LEGACY + 44) +#define MX21_INT_DMACH13 (NR_IRQS_LEGACY + 45) +#define MX21_INT_DMACH14 (NR_IRQS_LEGACY + 46) +#define MX21_INT_DMACH15 (NR_IRQS_LEGACY + 47) +#define MX21_INT_EMMAENC (NR_IRQS_LEGACY + 49) +#define MX21_INT_EMMADEC (NR_IRQS_LEGACY + 50) +#define MX21_INT_EMMAPRP (NR_IRQS_LEGACY + 51) +#define MX21_INT_EMMAPP (NR_IRQS_LEGACY + 52) +#define MX21_INT_USBWKUP (NR_IRQS_LEGACY + 53) +#define MX21_INT_USBDMA (NR_IRQS_LEGACY + 54) +#define MX21_INT_USBHOST (NR_IRQS_LEGACY + 55) +#define MX21_INT_USBFUNC (NR_IRQS_LEGACY + 56) +#define MX21_INT_USBMNP (NR_IRQS_LEGACY + 57) +#define MX21_INT_USBCTRL (NR_IRQS_LEGACY + 58) +#define MX21_INT_SLCDC (NR_IRQS_LEGACY + 60) +#define MX21_INT_LCDC (NR_IRQS_LEGACY + 61) /* fixed DMA request numbers */ #define MX21_DMA_REQ_CSPI3_RX 1 diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h index ccebf5ba12f0..627d94f1b010 100644 --- a/arch/arm/plat-mxc/include/mach/mx25.h +++ b/arch/arm/plat-mxc/include/mach/mx25.h @@ -61,40 +61,44 @@ #define MX25_IO_P2V(x) IMX_IO_P2V(x) #define MX25_IO_ADDRESS(x) IOMEM(MX25_IO_P2V(x)) -#define MX25_INT_CSPI3 0 -#define MX25_INT_I2C1 3 -#define MX25_INT_I2C2 4 -#define MX25_INT_UART4 5 -#define MX25_INT_ESDHC2 8 -#define MX25_INT_ESDHC1 9 -#define MX25_INT_I2C3 10 -#define MX25_INT_SSI2 11 -#define MX25_INT_SSI1 12 -#define MX25_INT_CSPI2 13 -#define MX25_INT_CSPI1 14 -#define MX25_INT_GPIO3 16 -#define MX25_INT_CSI 17 -#define MX25_INT_UART3 18 -#define MX25_INT_GPIO4 23 -#define MX25_INT_KPP 24 -#define MX25_INT_DRYICE 25 -#define MX25_INT_PWM1 26 -#define MX25_INT_UART2 32 -#define MX25_INT_NFC 33 -#define MX25_INT_SDMA 34 -#define MX25_INT_USB_HS 35 -#define MX25_INT_PWM2 36 -#define MX25_INT_USB_OTG 37 -#define MX25_INT_LCDC 39 -#define MX25_INT_UART5 40 -#define MX25_INT_PWM3 41 -#define MX25_INT_PWM4 42 -#define MX25_INT_CAN1 43 -#define MX25_INT_CAN2 44 -#define MX25_INT_UART1 45 -#define MX25_INT_GPIO2 51 -#define MX25_INT_GPIO1 52 -#define MX25_INT_FEC 57 +/* + * Interrupt numbers + */ +#include <asm/irq.h> +#define MX25_INT_CSPI3 (NR_IRQS_LEGACY + 0) +#define MX25_INT_I2C1 (NR_IRQS_LEGACY + 3) +#define MX25_INT_I2C2 (NR_IRQS_LEGACY + 4) +#define MX25_INT_UART4 (NR_IRQS_LEGACY + 5) +#define MX25_INT_ESDHC2 (NR_IRQS_LEGACY + 8) +#define MX25_INT_ESDHC1 (NR_IRQS_LEGACY + 9) +#define MX25_INT_I2C3 (NR_IRQS_LEGACY + 10) +#define MX25_INT_SSI2 (NR_IRQS_LEGACY + 11) +#define MX25_INT_SSI1 (NR_IRQS_LEGACY + 12) +#define MX25_INT_CSPI2 (NR_IRQS_LEGACY + 13) +#define MX25_INT_CSPI1 (NR_IRQS_LEGACY + 14) +#define MX25_INT_GPIO3 (NR_IRQS_LEGACY + 16) +#define MX25_INT_CSI (NR_IRQS_LEGACY + 17) +#define MX25_INT_UART3 (NR_IRQS_LEGACY + 18) +#define MX25_INT_GPIO4 (NR_IRQS_LEGACY + 23) +#define MX25_INT_KPP (NR_IRQS_LEGACY + 24) +#define MX25_INT_DRYICE (NR_IRQS_LEGACY + 25) +#define MX25_INT_PWM1 (NR_IRQS_LEGACY + 26) +#define MX25_INT_UART2 (NR_IRQS_LEGACY + 32) +#define MX25_INT_NFC (NR_IRQS_LEGACY + 33) +#define MX25_INT_SDMA (NR_IRQS_LEGACY + 34) +#define MX25_INT_USB_HS (NR_IRQS_LEGACY + 35) +#define MX25_INT_PWM2 (NR_IRQS_LEGACY + 36) +#define MX25_INT_USB_OTG (NR_IRQS_LEGACY + 37) +#define MX25_INT_LCDC (NR_IRQS_LEGACY + 39) +#define MX25_INT_UART5 (NR_IRQS_LEGACY + 40) +#define MX25_INT_PWM3 (NR_IRQS_LEGACY + 41) +#define MX25_INT_PWM4 (NR_IRQS_LEGACY + 42) +#define MX25_INT_CAN1 (NR_IRQS_LEGACY + 43) +#define MX25_INT_CAN2 (NR_IRQS_LEGACY + 44) +#define MX25_INT_UART1 (NR_IRQS_LEGACY + 45) +#define MX25_INT_GPIO2 (NR_IRQS_LEGACY + 51) +#define MX25_INT_GPIO1 (NR_IRQS_LEGACY + 52) +#define MX25_INT_FEC (NR_IRQS_LEGACY + 57) #define MX25_DMA_REQ_SSI2_RX1 22 #define MX25_DMA_REQ_SSI2_TX1 23 diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h index 6265357284d7..e074616d54ca 100644 --- a/arch/arm/plat-mxc/include/mach/mx27.h +++ b/arch/arm/plat-mxc/include/mach/mx27.h @@ -128,69 +128,70 @@ #define MX27_IO_ADDRESS(x) IOMEM(MX27_IO_P2V(x)) /* fixed interrupt numbers */ -#define MX27_INT_I2C2 1 -#define MX27_INT_GPT6 2 -#define MX27_INT_GPT5 3 -#define MX27_INT_GPT4 4 -#define MX27_INT_RTIC 5 -#define MX27_INT_CSPI3 6 -#define MX27_INT_SDHC 7 -#define MX27_INT_GPIO 8 -#define MX27_INT_SDHC3 9 -#define MX27_INT_SDHC2 10 -#define MX27_INT_SDHC1 11 -#define MX27_INT_I2C1 12 -#define MX27_INT_SSI2 13 -#define MX27_INT_SSI1 14 -#define MX27_INT_CSPI2 15 -#define MX27_INT_CSPI1 16 -#define MX27_INT_UART4 17 -#define MX27_INT_UART3 18 -#define MX27_INT_UART2 19 -#define MX27_INT_UART1 20 -#define MX27_INT_KPP 21 -#define MX27_INT_RTC 22 -#define MX27_INT_PWM 23 -#define MX27_INT_GPT3 24 -#define MX27_INT_GPT2 25 -#define MX27_INT_GPT1 26 -#define MX27_INT_WDOG 27 -#define MX27_INT_PCMCIA 28 -#define MX27_INT_NFC 29 -#define MX27_INT_ATA 30 -#define MX27_INT_CSI 31 -#define MX27_INT_DMACH0 32 -#define MX27_INT_DMACH1 33 -#define MX27_INT_DMACH2 34 -#define MX27_INT_DMACH3 35 -#define MX27_INT_DMACH4 36 -#define MX27_INT_DMACH5 37 -#define MX27_INT_DMACH6 38 -#define MX27_INT_DMACH7 39 -#define MX27_INT_DMACH8 40 -#define MX27_INT_DMACH9 41 -#define MX27_INT_DMACH10 42 -#define MX27_INT_DMACH11 43 -#define MX27_INT_DMACH12 44 -#define MX27_INT_DMACH13 45 -#define MX27_INT_DMACH14 46 -#define MX27_INT_DMACH15 47 -#define MX27_INT_UART6 48 -#define MX27_INT_UART5 49 -#define MX27_INT_FEC 50 -#define MX27_INT_EMMAPRP 51 -#define MX27_INT_EMMAPP 52 -#define MX27_INT_VPU 53 -#define MX27_INT_USB_HS1 54 -#define MX27_INT_USB_HS2 55 -#define MX27_INT_USB_OTG 56 -#define MX27_INT_SCC_SMN 57 -#define MX27_INT_SCC_SCM 58 -#define MX27_INT_SAHARA 59 -#define MX27_INT_SLCDC 60 -#define MX27_INT_LCDC 61 -#define MX27_INT_IIM 62 -#define MX27_INT_CCM 63 +#include <asm/irq.h> +#define MX27_INT_I2C2 (NR_IRQS_LEGACY + 1) +#define MX27_INT_GPT6 (NR_IRQS_LEGACY + 2) +#define MX27_INT_GPT5 (NR_IRQS_LEGACY + 3) +#define MX27_INT_GPT4 (NR_IRQS_LEGACY + 4) +#define MX27_INT_RTIC (NR_IRQS_LEGACY + 5) +#define MX27_INT_CSPI3 (NR_IRQS_LEGACY + 6) +#define MX27_INT_SDHC (NR_IRQS_LEGACY + 7) +#define MX27_INT_GPIO (NR_IRQS_LEGACY + 8) +#define MX27_INT_SDHC3 (NR_IRQS_LEGACY + 9) +#define MX27_INT_SDHC2 (NR_IRQS_LEGACY + 10) +#define MX27_INT_SDHC1 (NR_IRQS_LEGACY + 11) +#define MX27_INT_I2C1 (NR_IRQS_LEGACY + 12) +#define MX27_INT_SSI2 (NR_IRQS_LEGACY + 13) +#define MX27_INT_SSI1 (NR_IRQS_LEGACY + 14) +#define MX27_INT_CSPI2 (NR_IRQS_LEGACY + 15) +#define MX27_INT_CSPI1 (NR_IRQS_LEGACY + 16) +#define MX27_INT_UART4 (NR_IRQS_LEGACY + 17) +#define MX27_INT_UART3 (NR_IRQS_LEGACY + 18) +#define MX27_INT_UART2 (NR_IRQS_LEGACY + 19) +#define MX27_INT_UART1 (NR_IRQS_LEGACY + 20) +#define MX27_INT_KPP (NR_IRQS_LEGACY + 21) +#define MX27_INT_RTC (NR_IRQS_LEGACY + 22) +#define MX27_INT_PWM (NR_IRQS_LEGACY + 23) +#define MX27_INT_GPT3 (NR_IRQS_LEGACY + 24) +#define MX27_INT_GPT2 (NR_IRQS_LEGACY + 25) +#define MX27_INT_GPT1 (NR_IRQS_LEGACY + 26) +#define MX27_INT_WDOG (NR_IRQS_LEGACY + 27) +#define MX27_INT_PCMCIA (NR_IRQS_LEGACY + 28) +#define MX27_INT_NFC (NR_IRQS_LEGACY + 29) +#define MX27_INT_ATA (NR_IRQS_LEGACY + 30) +#define MX27_INT_CSI (NR_IRQS_LEGACY + 31) +#define MX27_INT_DMACH0 (NR_IRQS_LEGACY + 32) +#define MX27_INT_DMACH1 (NR_IRQS_LEGACY + 33) +#define MX27_INT_DMACH2 (NR_IRQS_LEGACY + 34) +#define MX27_INT_DMACH3 (NR_IRQS_LEGACY + 35) +#define MX27_INT_DMACH4 (NR_IRQS_LEGACY + 36) +#define MX27_INT_DMACH5 (NR_IRQS_LEGACY + 37) +#define MX27_INT_DMACH6 (NR_IRQS_LEGACY + 38) +#define MX27_INT_DMACH7 (NR_IRQS_LEGACY + 39) +#define MX27_INT_DMACH8 (NR_IRQS_LEGACY + 40) +#define MX27_INT_DMACH9 (NR_IRQS_LEGACY + 41) +#define MX27_INT_DMACH10 (NR_IRQS_LEGACY + 42) +#define MX27_INT_DMACH11 (NR_IRQS_LEGACY + 43) +#define MX27_INT_DMACH12 (NR_IRQS_LEGACY + 44) +#define MX27_INT_DMACH13 (NR_IRQS_LEGACY + 45) +#define MX27_INT_DMACH14 (NR_IRQS_LEGACY + 46) +#define MX27_INT_DMACH15 (NR_IRQS_LEGACY + 47) +#define MX27_INT_UART6 (NR_IRQS_LEGACY + 48) +#define MX27_INT_UART5 (NR_IRQS_LEGACY + 49) +#define MX27_INT_FEC (NR_IRQS_LEGACY + 50) +#define MX27_INT_EMMAPRP (NR_IRQS_LEGACY + 51) +#define MX27_INT_EMMAPP (NR_IRQS_LEGACY + 52) +#define MX27_INT_VPU (NR_IRQS_LEGACY + 53) +#define MX27_INT_USB_HS1 (NR_IRQS_LEGACY + 54) +#define MX27_INT_USB_HS2 (NR_IRQS_LEGACY + 55) +#define MX27_INT_USB_OTG (NR_IRQS_LEGACY + 56) +#define MX27_INT_SCC_SMN (NR_IRQS_LEGACY + 57) +#define MX27_INT_SCC_SCM (NR_IRQS_LEGACY + 58) +#define MX27_INT_SAHARA (NR_IRQS_LEGACY + 59) +#define MX27_INT_SLCDC (NR_IRQS_LEGACY + 60) +#define MX27_INT_LCDC (NR_IRQS_LEGACY + 61) +#define MX27_INT_IIM (NR_IRQS_LEGACY + 62) +#define MX27_INT_CCM (NR_IRQS_LEGACY + 63) /* fixed DMA request numbers */ #define MX27_DMA_REQ_CSPI3_RX 1 diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h index 6d07839fdec2..11642f5b224c 100644 --- a/arch/arm/plat-mxc/include/mach/mx2x.h +++ b/arch/arm/plat-mxc/include/mach/mx2x.h @@ -68,49 +68,50 @@ #define MX2x_CSI_BASE_ADDR (MX2x_SAHB1_BASE_ADDR + 0x0000) /* fixed interrupt numbers */ -#define MX2x_INT_CSPI3 6 -#define MX2x_INT_GPIO 8 -#define MX2x_INT_SDHC2 10 -#define MX2x_INT_SDHC1 11 -#define MX2x_INT_I2C 12 -#define MX2x_INT_SSI2 13 -#define MX2x_INT_SSI1 14 -#define MX2x_INT_CSPI2 15 -#define MX2x_INT_CSPI1 16 -#define MX2x_INT_UART4 17 -#define MX2x_INT_UART3 18 -#define MX2x_INT_UART2 19 -#define MX2x_INT_UART1 20 -#define MX2x_INT_KPP 21 -#define MX2x_INT_RTC 22 -#define MX2x_INT_PWM 23 -#define MX2x_INT_GPT3 24 -#define MX2x_INT_GPT2 25 -#define MX2x_INT_GPT1 26 -#define MX2x_INT_WDOG 27 -#define MX2x_INT_PCMCIA 28 -#define MX2x_INT_NANDFC 29 -#define MX2x_INT_CSI 31 -#define MX2x_INT_DMACH0 32 -#define MX2x_INT_DMACH1 33 -#define MX2x_INT_DMACH2 34 -#define MX2x_INT_DMACH3 35 -#define MX2x_INT_DMACH4 36 -#define MX2x_INT_DMACH5 37 -#define MX2x_INT_DMACH6 38 -#define MX2x_INT_DMACH7 39 -#define MX2x_INT_DMACH8 40 -#define MX2x_INT_DMACH9 41 -#define MX2x_INT_DMACH10 42 -#define MX2x_INT_DMACH11 43 -#define MX2x_INT_DMACH12 44 -#define MX2x_INT_DMACH13 45 -#define MX2x_INT_DMACH14 46 -#define MX2x_INT_DMACH15 47 -#define MX2x_INT_EMMAPRP 51 -#define MX2x_INT_EMMAPP 52 -#define MX2x_INT_SLCDC 60 -#define MX2x_INT_LCDC 61 +#include <asm/irq.h> +#define MX2x_INT_CSPI3 (NR_IRQS_LEGACY + 6) +#define MX2x_INT_GPIO (NR_IRQS_LEGACY + 8) +#define MX2x_INT_SDHC2 (NR_IRQS_LEGACY + 10) +#define MX2x_INT_SDHC1 (NR_IRQS_LEGACY + 11) +#define MX2x_INT_I2C (NR_IRQS_LEGACY + 12) +#define MX2x_INT_SSI2 (NR_IRQS_LEGACY + 13) +#define MX2x_INT_SSI1 (NR_IRQS_LEGACY + 14) +#define MX2x_INT_CSPI2 (NR_IRQS_LEGACY + 15) +#define MX2x_INT_CSPI1 (NR_IRQS_LEGACY + 16) +#define MX2x_INT_UART4 (NR_IRQS_LEGACY + 17) +#define MX2x_INT_UART3 (NR_IRQS_LEGACY + 18) +#define MX2x_INT_UART2 (NR_IRQS_LEGACY + 19) +#define MX2x_INT_UART1 (NR_IRQS_LEGACY + 20) +#define MX2x_INT_KPP (NR_IRQS_LEGACY + 21) +#define MX2x_INT_RTC (NR_IRQS_LEGACY + 22) +#define MX2x_INT_PWM (NR_IRQS_LEGACY + 23) +#define MX2x_INT_GPT3 (NR_IRQS_LEGACY + 24) +#define MX2x_INT_GPT2 (NR_IRQS_LEGACY + 25) +#define MX2x_INT_GPT1 (NR_IRQS_LEGACY + 26) +#define MX2x_INT_WDOG (NR_IRQS_LEGACY + 27) +#define MX2x_INT_PCMCIA (NR_IRQS_LEGACY + 28) +#define MX2x_INT_NANDFC (NR_IRQS_LEGACY + 29) +#define MX2x_INT_CSI (NR_IRQS_LEGACY + 31) +#define MX2x_INT_DMACH0 (NR_IRQS_LEGACY + 32) +#define MX2x_INT_DMACH1 (NR_IRQS_LEGACY + 33) +#define MX2x_INT_DMACH2 (NR_IRQS_LEGACY + 34) +#define MX2x_INT_DMACH3 (NR_IRQS_LEGACY + 35) +#define MX2x_INT_DMACH4 (NR_IRQS_LEGACY + 36) +#define MX2x_INT_DMACH5 (NR_IRQS_LEGACY + 37) +#define MX2x_INT_DMACH6 (NR_IRQS_LEGACY + 38) +#define MX2x_INT_DMACH7 (NR_IRQS_LEGACY + 39) +#define MX2x_INT_DMACH8 (NR_IRQS_LEGACY + 40) +#define MX2x_INT_DMACH9 (NR_IRQS_LEGACY + 41) +#define MX2x_INT_DMACH10 (NR_IRQS_LEGACY + 42) +#define MX2x_INT_DMACH11 (NR_IRQS_LEGACY + 43) +#define MX2x_INT_DMACH12 (NR_IRQS_LEGACY + 44) +#define MX2x_INT_DMACH13 (NR_IRQS_LEGACY + 45) +#define MX2x_INT_DMACH14 (NR_IRQS_LEGACY + 46) +#define MX2x_INT_DMACH15 (NR_IRQS_LEGACY + 47) +#define MX2x_INT_EMMAPRP (NR_IRQS_LEGACY + 51) +#define MX2x_INT_EMMAPP (NR_IRQS_LEGACY + 52) +#define MX2x_INT_SLCDC (NR_IRQS_LEGACY + 60) +#define MX2x_INT_LCDC (NR_IRQS_LEGACY + 61) /* fixed DMA request numbers */ #define MX2x_DMA_REQ_CSPI3_RX 1 diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h index e27619e442c0..dbced61d9fda 100644 --- a/arch/arm/plat-mxc/include/mach/mx31.h +++ b/arch/arm/plat-mxc/include/mach/mx31.h @@ -118,63 +118,67 @@ #define MX31_IO_P2V(x) IMX_IO_P2V(x) #define MX31_IO_ADDRESS(x) IOMEM(MX31_IO_P2V(x)) -#define MX31_INT_I2C3 3 -#define MX31_INT_I2C2 4 -#define MX31_INT_MPEG4_ENCODER 5 -#define MX31_INT_RTIC 6 -#define MX31_INT_FIRI 7 -#define MX31_INT_SDHC2 8 -#define MX31_INT_SDHC1 9 -#define MX31_INT_I2C1 10 -#define MX31_INT_SSI2 11 -#define MX31_INT_SSI1 12 -#define MX31_INT_CSPI2 13 -#define MX31_INT_CSPI1 14 -#define MX31_INT_ATA 15 -#define MX31_INT_MBX 16 -#define MX31_INT_CSPI3 17 -#define MX31_INT_UART3 18 -#define MX31_INT_IIM 19 -#define MX31_INT_SIM2 20 -#define MX31_INT_SIM1 21 -#define MX31_INT_RNGA 22 -#define MX31_INT_EVTMON 23 -#define MX31_INT_KPP 24 -#define MX31_INT_RTC 25 -#define MX31_INT_PWM 26 -#define MX31_INT_EPIT2 27 -#define MX31_INT_EPIT1 28 -#define MX31_INT_GPT 29 -#define MX31_INT_POWER_FAIL 30 -#define MX31_INT_CCM_DVFS 31 -#define MX31_INT_UART2 32 -#define MX31_INT_NFC 33 -#define MX31_INT_SDMA 34 -#define MX31_INT_USB_HS1 35 -#define MX31_INT_USB_HS2 36 -#define MX31_INT_USB_OTG 37 -#define MX31_INT_MSHC1 39 -#define MX31_INT_MSHC2 40 -#define MX31_INT_IPU_ERR 41 -#define MX31_INT_IPU_SYN 42 -#define MX31_INT_UART1 45 -#define MX31_INT_UART4 46 -#define MX31_INT_UART5 47 -#define MX31_INT_ECT 48 -#define MX31_INT_SCC_SCM 49 -#define MX31_INT_SCC_SMN 50 -#define MX31_INT_GPIO2 51 -#define MX31_INT_GPIO1 52 -#define MX31_INT_CCM 53 -#define MX31_INT_PCMCIA 54 -#define MX31_INT_WDOG 55 -#define MX31_INT_GPIO3 56 -#define MX31_INT_EXT_POWER 58 -#define MX31_INT_EXT_TEMPER 59 -#define MX31_INT_EXT_SENSOR60 60 -#define MX31_INT_EXT_SENSOR61 61 -#define MX31_INT_EXT_WDOG 62 -#define MX31_INT_EXT_TV 63 +/* + * Interrupt numbers + */ +#include <asm/irq.h> +#define MX31_INT_I2C3 (NR_IRQS_LEGACY + 3) +#define MX31_INT_I2C2 (NR_IRQS_LEGACY + 4) +#define MX31_INT_MPEG4_ENCODER (NR_IRQS_LEGACY + 5) +#define MX31_INT_RTIC (NR_IRQS_LEGACY + 6) +#define MX31_INT_FIRI (NR_IRQS_LEGACY + 7) +#define MX31_INT_SDHC2 (NR_IRQS_LEGACY + 8) +#define MX31_INT_SDHC1 (NR_IRQS_LEGACY + 9) +#define MX31_INT_I2C1 (NR_IRQS_LEGACY + 10) +#define MX31_INT_SSI2 (NR_IRQS_LEGACY + 11) +#define MX31_INT_SSI1 (NR_IRQS_LEGACY + 12) +#define MX31_INT_CSPI2 (NR_IRQS_LEGACY + 13) +#define MX31_INT_CSPI1 (NR_IRQS_LEGACY + 14) +#define MX31_INT_ATA (NR_IRQS_LEGACY + 15) +#define MX31_INT_MBX (NR_IRQS_LEGACY + 16) +#define MX31_INT_CSPI3 (NR_IRQS_LEGACY + 17) +#define MX31_INT_UART3 (NR_IRQS_LEGACY + 18) +#define MX31_INT_IIM (NR_IRQS_LEGACY + 19) +#define MX31_INT_SIM2 (NR_IRQS_LEGACY + 20) +#define MX31_INT_SIM1 (NR_IRQS_LEGACY + 21) +#define MX31_INT_RNGA (NR_IRQS_LEGACY + 22) +#define MX31_INT_EVTMON (NR_IRQS_LEGACY + 23) +#define MX31_INT_KPP (NR_IRQS_LEGACY + 24) +#define MX31_INT_RTC (NR_IRQS_LEGACY + 25) +#define MX31_INT_PWM (NR_IRQS_LEGACY + 26) +#define MX31_INT_EPIT2 (NR_IRQS_LEGACY + 27) +#define MX31_INT_EPIT1 (NR_IRQS_LEGACY + 28) +#define MX31_INT_GPT (NR_IRQS_LEGACY + 29) +#define MX31_INT_POWER_FAIL (NR_IRQS_LEGACY + 30) +#define MX31_INT_CCM_DVFS (NR_IRQS_LEGACY + 31) +#define MX31_INT_UART2 (NR_IRQS_LEGACY + 32) +#define MX31_INT_NFC (NR_IRQS_LEGACY + 33) +#define MX31_INT_SDMA (NR_IRQS_LEGACY + 34) +#define MX31_INT_USB_HS1 (NR_IRQS_LEGACY + 35) +#define MX31_INT_USB_HS2 (NR_IRQS_LEGACY + 36) +#define MX31_INT_USB_OTG (NR_IRQS_LEGACY + 37) +#define MX31_INT_MSHC1 (NR_IRQS_LEGACY + 39) +#define MX31_INT_MSHC2 (NR_IRQS_LEGACY + 40) +#define MX31_INT_IPU_ERR (NR_IRQS_LEGACY + 41) +#define MX31_INT_IPU_SYN (NR_IRQS_LEGACY + 42) +#define MX31_INT_UART1 (NR_IRQS_LEGACY + 45) +#define MX31_INT_UART4 (NR_IRQS_LEGACY + 46) +#define MX31_INT_UART5 (NR_IRQS_LEGACY + 47) +#define MX31_INT_ECT (NR_IRQS_LEGACY + 48) +#define MX31_INT_SCC_SCM (NR_IRQS_LEGACY + 49) +#define MX31_INT_SCC_SMN (NR_IRQS_LEGACY + 50) +#define MX31_INT_GPIO2 (NR_IRQS_LEGACY + 51) +#define MX31_INT_GPIO1 (NR_IRQS_LEGACY + 52) +#define MX31_INT_CCM (NR_IRQS_LEGACY + 53) +#define MX31_INT_PCMCIA (NR_IRQS_LEGACY + 54) +#define MX31_INT_WDOG (NR_IRQS_LEGACY + 55) +#define MX31_INT_GPIO3 (NR_IRQS_LEGACY + 56) +#define MX31_INT_EXT_POWER (NR_IRQS_LEGACY + 58) +#define MX31_INT_EXT_TEMPER (NR_IRQS_LEGACY + 59) +#define MX31_INT_EXT_SENSOR60 (NR_IRQS_LEGACY + 60) +#define MX31_INT_EXT_SENSOR61 (NR_IRQS_LEGACY + 61) +#define MX31_INT_EXT_WDOG (NR_IRQS_LEGACY + 62) +#define MX31_INT_EXT_TV (NR_IRQS_LEGACY + 63) #define MX31_DMA_REQ_SDHC1 20 #define MX31_DMA_REQ_SDHC2 21 diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h index 80965a99aa55..2af5d3a699c7 100644 --- a/arch/arm/plat-mxc/include/mach/mx35.h +++ b/arch/arm/plat-mxc/include/mach/mx35.h @@ -120,60 +120,61 @@ /* * Interrupt numbers */ -#define MX35_INT_OWIRE 2 -#define MX35_INT_I2C3 3 -#define MX35_INT_I2C2 4 -#define MX35_INT_RTIC 6 -#define MX35_INT_ESDHC1 7 -#define MX35_INT_ESDHC2 8 -#define MX35_INT_ESDHC3 9 -#define MX35_INT_I2C1 10 -#define MX35_INT_SSI1 11 -#define MX35_INT_SSI2 12 -#define MX35_INT_CSPI2 13 -#define MX35_INT_CSPI1 14 -#define MX35_INT_ATA 15 -#define MX35_INT_GPU2D 16 -#define MX35_INT_ASRC 17 -#define MX35_INT_UART3 18 -#define MX35_INT_IIM 19 -#define MX35_INT_RNGA 22 -#define MX35_INT_EVTMON 23 -#define MX35_INT_KPP 24 -#define MX35_INT_RTC 25 -#define MX35_INT_PWM 26 -#define MX35_INT_EPIT2 27 -#define MX35_INT_EPIT1 28 -#define MX35_INT_GPT 29 -#define MX35_INT_POWER_FAIL 30 -#define MX35_INT_UART2 32 -#define MX35_INT_NFC 33 -#define MX35_INT_SDMA 34 -#define MX35_INT_USB_HS 35 -#define MX35_INT_USB_OTG 37 -#define MX35_INT_MSHC1 39 -#define MX35_INT_ESAI 40 -#define MX35_INT_IPU_ERR 41 -#define MX35_INT_IPU_SYN 42 -#define MX35_INT_CAN1 43 -#define MX35_INT_CAN2 44 -#define MX35_INT_UART1 45 -#define MX35_INT_MLB 46 -#define MX35_INT_SPDIF 47 -#define MX35_INT_ECT 48 -#define MX35_INT_SCC_SCM 49 -#define MX35_INT_SCC_SMN 50 -#define MX35_INT_GPIO2 51 -#define MX35_INT_GPIO1 52 -#define MX35_INT_WDOG 55 -#define MX35_INT_GPIO3 56 -#define MX35_INT_FEC 57 -#define MX35_INT_EXT_POWER 58 -#define MX35_INT_EXT_TEMPER 59 -#define MX35_INT_EXT_SENSOR60 60 -#define MX35_INT_EXT_SENSOR61 61 -#define MX35_INT_EXT_WDOG 62 -#define MX35_INT_EXT_TV 63 +#include <asm/irq.h> +#define MX35_INT_OWIRE (NR_IRQS_LEGACY + 2) +#define MX35_INT_I2C3 (NR_IRQS_LEGACY + 3) +#define MX35_INT_I2C2 (NR_IRQS_LEGACY + 4) +#define MX35_INT_RTIC (NR_IRQS_LEGACY + 6) +#define MX35_INT_ESDHC1 (NR_IRQS_LEGACY + 7) +#define MX35_INT_ESDHC2 (NR_IRQS_LEGACY + 8) +#define MX35_INT_ESDHC3 (NR_IRQS_LEGACY + 9) +#define MX35_INT_I2C1 (NR_IRQS_LEGACY + 10) +#define MX35_INT_SSI1 (NR_IRQS_LEGACY + 11) +#define MX35_INT_SSI2 (NR_IRQS_LEGACY + 12) +#define MX35_INT_CSPI2 (NR_IRQS_LEGACY + 13) +#define MX35_INT_CSPI1 (NR_IRQS_LEGACY + 14) +#define MX35_INT_ATA (NR_IRQS_LEGACY + 15) +#define MX35_INT_GPU2D (NR_IRQS_LEGACY + 16) +#define MX35_INT_ASRC (NR_IRQS_LEGACY + 17) +#define MX35_INT_UART3 (NR_IRQS_LEGACY + 18) +#define MX35_INT_IIM (NR_IRQS_LEGACY + 19) +#define MX35_INT_RNGA (NR_IRQS_LEGACY + 22) +#define MX35_INT_EVTMON (NR_IRQS_LEGACY + 23) +#define MX35_INT_KPP (NR_IRQS_LEGACY + 24) +#define MX35_INT_RTC (NR_IRQS_LEGACY + 25) +#define MX35_INT_PWM (NR_IRQS_LEGACY + 26) +#define MX35_INT_EPIT2 (NR_IRQS_LEGACY + 27) +#define MX35_INT_EPIT1 (NR_IRQS_LEGACY + 28) +#define MX35_INT_GPT (NR_IRQS_LEGACY + 29) +#define MX35_INT_POWER_FAIL (NR_IRQS_LEGACY + 30) +#define MX35_INT_UART2 (NR_IRQS_LEGACY + 32) +#define MX35_INT_NFC (NR_IRQS_LEGACY + 33) +#define MX35_INT_SDMA (NR_IRQS_LEGACY + 34) +#define MX35_INT_USB_HS (NR_IRQS_LEGACY + 35) +#define MX35_INT_USB_OTG (NR_IRQS_LEGACY + 37) +#define MX35_INT_MSHC1 (NR_IRQS_LEGACY + 39) +#define MX35_INT_ESAI (NR_IRQS_LEGACY + 40) +#define MX35_INT_IPU_ERR (NR_IRQS_LEGACY + 41) +#define MX35_INT_IPU_SYN (NR_IRQS_LEGACY + 42) +#define MX35_INT_CAN1 (NR_IRQS_LEGACY + 43) +#define MX35_INT_CAN2 (NR_IRQS_LEGACY + 44) +#define MX35_INT_UART1 (NR_IRQS_LEGACY + 45) +#define MX35_INT_MLB (NR_IRQS_LEGACY + 46) +#define MX35_INT_SPDIF (NR_IRQS_LEGACY + 47) +#define MX35_INT_ECT (NR_IRQS_LEGACY + 48) +#define MX35_INT_SCC_SCM (NR_IRQS_LEGACY + 49) +#define MX35_INT_SCC_SMN (NR_IRQS_LEGACY + 50) +#define MX35_INT_GPIO2 (NR_IRQS_LEGACY + 51) +#define MX35_INT_GPIO1 (NR_IRQS_LEGACY + 52) +#define MX35_INT_WDOG (NR_IRQS_LEGACY + 55) +#define MX35_INT_GPIO3 (NR_IRQS_LEGACY + 56) +#define MX35_INT_FEC (NR_IRQS_LEGACY + 57) +#define MX35_INT_EXT_POWER (NR_IRQS_LEGACY + 58) +#define MX35_INT_EXT_TEMPER (NR_IRQS_LEGACY + 59) +#define MX35_INT_EXT_SENSOR60 (NR_IRQS_LEGACY + 60) +#define MX35_INT_EXT_SENSOR61 (NR_IRQS_LEGACY + 61) +#define MX35_INT_EXT_WDOG (NR_IRQS_LEGACY + 62) +#define MX35_INT_EXT_TV (NR_IRQS_LEGACY + 63) #define MX35_DMA_REQ_SSI2_RX1 22 #define MX35_DMA_REQ_SSI2_TX1 23 diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h index 30dbf424583e..96fb4fbc8ad7 100644 --- a/arch/arm/plat-mxc/include/mach/mx3x.h +++ b/arch/arm/plat-mxc/include/mach/mx3x.h @@ -143,44 +143,45 @@ /* * Interrupt numbers */ -#define MX3x_INT_I2C3 3 -#define MX3x_INT_I2C2 4 -#define MX3x_INT_RTIC 6 -#define MX3x_INT_I2C 10 -#define MX3x_INT_CSPI2 13 -#define MX3x_INT_CSPI1 14 -#define MX3x_INT_ATA 15 -#define MX3x_INT_UART3 18 -#define MX3x_INT_IIM 19 -#define MX3x_INT_RNGA 22 -#define MX3x_INT_EVTMON 23 -#define MX3x_INT_KPP 24 -#define MX3x_INT_RTC 25 -#define MX3x_INT_PWM 26 -#define MX3x_INT_EPIT2 27 -#define MX3x_INT_EPIT1 28 -#define MX3x_INT_GPT 29 -#define MX3x_INT_POWER_FAIL 30 -#define MX3x_INT_UART2 32 -#define MX3x_INT_NANDFC 33 -#define MX3x_INT_SDMA 34 -#define MX3x_INT_MSHC1 39 -#define MX3x_INT_IPU_ERR 41 -#define MX3x_INT_IPU_SYN 42 -#define MX3x_INT_UART1 45 -#define MX3x_INT_ECT 48 -#define MX3x_INT_SCC_SCM 49 -#define MX3x_INT_SCC_SMN 50 -#define MX3x_INT_GPIO2 51 -#define MX3x_INT_GPIO1 52 -#define MX3x_INT_WDOG 55 -#define MX3x_INT_GPIO3 56 -#define MX3x_INT_EXT_POWER 58 -#define MX3x_INT_EXT_TEMPER 59 -#define MX3x_INT_EXT_SENSOR60 60 -#define MX3x_INT_EXT_SENSOR61 61 -#define MX3x_INT_EXT_WDOG 62 -#define MX3x_INT_EXT_TV 63 +#include <asm/irq.h> +#define MX3x_INT_I2C3 (NR_IRQS_LEGACY + 3) +#define MX3x_INT_I2C2 (NR_IRQS_LEGACY + 4) +#define MX3x_INT_RTIC (NR_IRQS_LEGACY + 6) +#define MX3x_INT_I2C (NR_IRQS_LEGACY + 10) +#define MX3x_INT_CSPI2 (NR_IRQS_LEGACY + 13) +#define MX3x_INT_CSPI1 (NR_IRQS_LEGACY + 14) +#define MX3x_INT_ATA (NR_IRQS_LEGACY + 15) +#define MX3x_INT_UART3 (NR_IRQS_LEGACY + 18) +#define MX3x_INT_IIM (NR_IRQS_LEGACY + 19) +#define MX3x_INT_RNGA (NR_IRQS_LEGACY + 22) +#define MX3x_INT_EVTMON (NR_IRQS_LEGACY + 23) +#define MX3x_INT_KPP (NR_IRQS_LEGACY + 24) +#define MX3x_INT_RTC (NR_IRQS_LEGACY + 25) +#define MX3x_INT_PWM (NR_IRQS_LEGACY + 26) +#define MX3x_INT_EPIT2 (NR_IRQS_LEGACY + 27) +#define MX3x_INT_EPIT1 (NR_IRQS_LEGACY + 28) +#define MX3x_INT_GPT (NR_IRQS_LEGACY + 29) +#define MX3x_INT_POWER_FAIL (NR_IRQS_LEGACY + 30) +#define MX3x_INT_UART2 (NR_IRQS_LEGACY + 32) +#define MX3x_INT_NANDFC (NR_IRQS_LEGACY + 33) +#define MX3x_INT_SDMA (NR_IRQS_LEGACY + 34) +#define MX3x_INT_MSHC1 (NR_IRQS_LEGACY + 39) +#define MX3x_INT_IPU_ERR (NR_IRQS_LEGACY + 41) +#define MX3x_INT_IPU_SYN (NR_IRQS_LEGACY + 42) +#define MX3x_INT_UART1 (NR_IRQS_LEGACY + 45) +#define MX3x_INT_ECT (NR_IRQS_LEGACY + 48) +#define MX3x_INT_SCC_SCM (NR_IRQS_LEGACY + 49) +#define MX3x_INT_SCC_SMN (NR_IRQS_LEGACY + 50) +#define MX3x_INT_GPIO2 (NR_IRQS_LEGACY + 51) +#define MX3x_INT_GPIO1 (NR_IRQS_LEGACY + 52) +#define MX3x_INT_WDOG (NR_IRQS_LEGACY + 55) +#define MX3x_INT_GPIO3 (NR_IRQS_LEGACY + 56) +#define MX3x_INT_EXT_POWER (NR_IRQS_LEGACY + 58) +#define MX3x_INT_EXT_TEMPER (NR_IRQS_LEGACY + 59) +#define MX3x_INT_EXT_SENSOR60 (NR_IRQS_LEGACY + 60) +#define MX3x_INT_EXT_SENSOR61 (NR_IRQS_LEGACY + 61) +#define MX3x_INT_EXT_WDOG (NR_IRQS_LEGACY + 62) +#define MX3x_INT_EXT_TV (NR_IRQS_LEGACY + 63) #define MX3x_PROD_SIGNATURE 0x1 /* For MX31 */ diff --git a/arch/arm/plat-mxc/include/mach/mx50.h b/arch/arm/plat-mxc/include/mach/mx50.h index 5f2da75a47f4..09ac19c1570c 100644 --- a/arch/arm/plat-mxc/include/mach/mx50.h +++ b/arch/arm/plat-mxc/include/mach/mx50.h @@ -188,99 +188,100 @@ /* * Interrupt numbers */ -#define MX50_INT_MMC_SDHC1 1 -#define MX50_INT_MMC_SDHC2 2 -#define MX50_INT_MMC_SDHC3 3 -#define MX50_INT_MMC_SDHC4 4 -#define MX50_INT_DAP 5 -#define MX50_INT_SDMA 6 -#define MX50_INT_IOMUX 7 -#define MX50_INT_UART4 13 -#define MX50_INT_USB_H1 14 -#define MX50_INT_USB_OTG 18 -#define MX50_INT_DATABAHN 19 -#define MX50_INT_ELCDIF 20 -#define MX50_INT_EPXP 21 -#define MX50_INT_SRTC_NTZ 24 -#define MX50_INT_SRTC_TZ 25 -#define MX50_INT_EPDC 27 -#define MX50_INT_NIC 28 -#define MX50_INT_SSI1 29 -#define MX50_INT_SSI2 30 -#define MX50_INT_UART1 31 -#define MX50_INT_UART2 32 -#define MX50_INT_UART3 33 -#define MX50_INT_RESV34 34 -#define MX50_INT_RESV35 35 -#define MX50_INT_CSPI1 36 -#define MX50_INT_CSPI2 37 -#define MX50_INT_CSPI 38 -#define MX50_INT_GPT 39 -#define MX50_INT_EPIT1 40 -#define MX50_INT_GPIO1_INT7 42 -#define MX50_INT_GPIO1_INT6 43 -#define MX50_INT_GPIO1_INT5 44 -#define MX50_INT_GPIO1_INT4 45 -#define MX50_INT_GPIO1_INT3 46 -#define MX50_INT_GPIO1_INT2 47 -#define MX50_INT_GPIO1_INT1 48 -#define MX50_INT_GPIO1_INT0 49 -#define MX50_INT_GPIO1_LOW 50 -#define MX50_INT_GPIO1_HIGH 51 -#define MX50_INT_GPIO2_LOW 52 -#define MX50_INT_GPIO2_HIGH 53 -#define MX50_INT_GPIO3_LOW 54 -#define MX50_INT_GPIO3_HIGH 55 -#define MX50_INT_GPIO4_LOW 56 -#define MX50_INT_GPIO4_HIGH 57 -#define MX50_INT_WDOG1 58 -#define MX50_INT_KPP 60 -#define MX50_INT_PWM1 61 -#define MX50_INT_I2C1 62 -#define MX50_INT_I2C2 63 -#define MX50_INT_I2C3 64 -#define MX50_INT_RESV65 65 -#define MX50_INT_DCDC 66 -#define MX50_INT_THERMAL_ALARM 67 -#define MX50_INT_ANA3 68 -#define MX50_INT_ANA4 69 -#define MX50_INT_CCM1 71 -#define MX50_INT_CCM2 72 -#define MX50_INT_GPC1 73 -#define MX50_INT_GPC2 74 -#define MX50_INT_SRC 75 -#define MX50_INT_NM 76 -#define MX50_INT_PMU 77 -#define MX50_INT_CTI_IRQ 78 -#define MX50_INT_CTI1_TG0 79 -#define MX50_INT_CTI1_TG1 80 -#define MX50_INT_GPU2_IRQ 84 -#define MX50_INT_GPU2_BUSY 85 -#define MX50_INT_UART5 86 -#define MX50_INT_FEC 87 -#define MX50_INT_OWIRE 88 -#define MX50_INT_CTI1_TG2 89 -#define MX50_INT_SJC 90 -#define MX50_INT_DCP_CHAN1_3 91 -#define MX50_INT_DCP_CHAN0 92 -#define MX50_INT_PWM2 94 -#define MX50_INT_RNGB 97 -#define MX50_INT_CTI1_TG3 98 -#define MX50_INT_RAWNAND_BCH 100 -#define MX50_INT_RAWNAND_GPMI 102 -#define MX50_INT_GPIO5_LOW 103 -#define MX50_INT_GPIO5_HIGH 104 -#define MX50_INT_GPIO6_LOW 105 -#define MX50_INT_GPIO6_HIGH 106 -#define MX50_INT_MSHC 109 -#define MX50_INT_APBHDMA_CHAN0 110 -#define MX50_INT_APBHDMA_CHAN1 111 -#define MX50_INT_APBHDMA_CHAN2 112 -#define MX50_INT_APBHDMA_CHAN3 113 -#define MX50_INT_APBHDMA_CHAN4 114 -#define MX50_INT_APBHDMA_CHAN5 115 -#define MX50_INT_APBHDMA_CHAN6 116 -#define MX50_INT_APBHDMA_CHAN7 117 +#include <asm/irq.h> +#define MX50_INT_MMC_SDHC1 (NR_IRQS_LEGACY + 1) +#define MX50_INT_MMC_SDHC2 (NR_IRQS_LEGACY + 2) +#define MX50_INT_MMC_SDHC3 (NR_IRQS_LEGACY + 3) +#define MX50_INT_MMC_SDHC4 (NR_IRQS_LEGACY + 4) +#define MX50_INT_DAP (NR_IRQS_LEGACY + 5) +#define MX50_INT_SDMA (NR_IRQS_LEGACY + 6) +#define MX50_INT_IOMUX (NR_IRQS_LEGACY + 7) +#define MX50_INT_UART4 (NR_IRQS_LEGACY + 13) +#define MX50_INT_USB_H1 (NR_IRQS_LEGACY + 14) +#define MX50_INT_USB_OTG (NR_IRQS_LEGACY + 18) +#define MX50_INT_DATABAHN (NR_IRQS_LEGACY + 19) +#define MX50_INT_ELCDIF (NR_IRQS_LEGACY + 20) +#define MX50_INT_EPXP (NR_IRQS_LEGACY + 21) +#define MX50_INT_SRTC_NTZ (NR_IRQS_LEGACY + 24) +#define MX50_INT_SRTC_TZ (NR_IRQS_LEGACY + 25) +#define MX50_INT_EPDC (NR_IRQS_LEGACY + 27) +#define MX50_INT_NIC (NR_IRQS_LEGACY + 28) +#define MX50_INT_SSI1 (NR_IRQS_LEGACY + 29) +#define MX50_INT_SSI2 (NR_IRQS_LEGACY + 30) +#define MX50_INT_UART1 (NR_IRQS_LEGACY + 31) +#define MX50_INT_UART2 (NR_IRQS_LEGACY + 32) +#define MX50_INT_UART3 (NR_IRQS_LEGACY + 33) +#define MX50_INT_RESV34 (NR_IRQS_LEGACY + 34) +#define MX50_INT_RESV35 (NR_IRQS_LEGACY + 35) +#define MX50_INT_CSPI1 (NR_IRQS_LEGACY + 36) +#define MX50_INT_CSPI2 (NR_IRQS_LEGACY + 37) +#define MX50_INT_CSPI (NR_IRQS_LEGACY + 38) +#define MX50_INT_GPT (NR_IRQS_LEGACY + 39) +#define MX50_INT_EPIT1 (NR_IRQS_LEGACY + 40) +#define MX50_INT_GPIO1_INT7 (NR_IRQS_LEGACY + 42) +#define MX50_INT_GPIO1_INT6 (NR_IRQS_LEGACY + 43) +#define MX50_INT_GPIO1_INT5 (NR_IRQS_LEGACY + 44) +#define MX50_INT_GPIO1_INT4 (NR_IRQS_LEGACY + 45) +#define MX50_INT_GPIO1_INT3 (NR_IRQS_LEGACY + 46) +#define MX50_INT_GPIO1_INT2 (NR_IRQS_LEGACY + 47) +#define MX50_INT_GPIO1_INT1 (NR_IRQS_LEGACY + 48) +#define MX50_INT_GPIO1_INT0 (NR_IRQS_LEGACY + 49) +#define MX50_INT_GPIO1_LOW (NR_IRQS_LEGACY + 50) +#define MX50_INT_GPIO1_HIGH (NR_IRQS_LEGACY + 51) +#define MX50_INT_GPIO2_LOW (NR_IRQS_LEGACY + 52) +#define MX50_INT_GPIO2_HIGH (NR_IRQS_LEGACY + 53) +#define MX50_INT_GPIO3_LOW (NR_IRQS_LEGACY + 54) +#define MX50_INT_GPIO3_HIGH (NR_IRQS_LEGACY + 55) +#define MX50_INT_GPIO4_LOW (NR_IRQS_LEGACY + 56) +#define MX50_INT_GPIO4_HIGH (NR_IRQS_LEGACY + 57) +#define MX50_INT_WDOG1 (NR_IRQS_LEGACY + 58) +#define MX50_INT_KPP (NR_IRQS_LEGACY + 60) +#define MX50_INT_PWM1 (NR_IRQS_LEGACY + 61) +#define MX50_INT_I2C1 (NR_IRQS_LEGACY + 62) +#define MX50_INT_I2C2 (NR_IRQS_LEGACY + 63) +#define MX50_INT_I2C3 (NR_IRQS_LEGACY + 64) +#define MX50_INT_RESV65 (NR_IRQS_LEGACY + 65) +#define MX50_INT_DCDC (NR_IRQS_LEGACY + 66) +#define MX50_INT_THERMAL_ALARM (NR_IRQS_LEGACY + 67) +#define MX50_INT_ANA3 (NR_IRQS_LEGACY + 68) +#define MX50_INT_ANA4 (NR_IRQS_LEGACY + 69) +#define MX50_INT_CCM1 (NR_IRQS_LEGACY + 71) +#define MX50_INT_CCM2 (NR_IRQS_LEGACY + 72) +#define MX50_INT_GPC1 (NR_IRQS_LEGACY + 73) +#define MX50_INT_GPC2 (NR_IRQS_LEGACY + 74) +#define MX50_INT_SRC (NR_IRQS_LEGACY + 75) +#define MX50_INT_NM (NR_IRQS_LEGACY + 76) +#define MX50_INT_PMU (NR_IRQS_LEGACY + 77) +#define MX50_INT_CTI_IRQ (NR_IRQS_LEGACY + 78) +#define MX50_INT_CTI1_TG0 (NR_IRQS_LEGACY + 79) +#define MX50_INT_CTI1_TG1 (NR_IRQS_LEGACY + 80) +#define MX50_INT_GPU2_IRQ (NR_IRQS_LEGACY + 84) +#define MX50_INT_GPU2_BUSY (NR_IRQS_LEGACY + 85) +#define MX50_INT_UART5 (NR_IRQS_LEGACY + 86) +#define MX50_INT_FEC (NR_IRQS_LEGACY + 87) +#define MX50_INT_OWIRE (NR_IRQS_LEGACY + 88) +#define MX50_INT_CTI1_TG2 (NR_IRQS_LEGACY + 89) +#define MX50_INT_SJC (NR_IRQS_LEGACY + 90) +#define MX50_INT_DCP_CHAN1_3 (NR_IRQS_LEGACY + 91) +#define MX50_INT_DCP_CHAN0 (NR_IRQS_LEGACY + 92) +#define MX50_INT_PWM2 (NR_IRQS_LEGACY + 94) +#define MX50_INT_RNGB (NR_IRQS_LEGACY + 97) +#define MX50_INT_CTI1_TG3 (NR_IRQS_LEGACY + 98) +#define MX50_INT_RAWNAND_BCH (NR_IRQS_LEGACY + 100) +#define MX50_INT_RAWNAND_GPMI (NR_IRQS_LEGACY + 102) +#define MX50_INT_GPIO5_LOW (NR_IRQS_LEGACY + 103) +#define MX50_INT_GPIO5_HIGH (NR_IRQS_LEGACY + 104) +#define MX50_INT_GPIO6_LOW (NR_IRQS_LEGACY + 105) +#define MX50_INT_GPIO6_HIGH (NR_IRQS_LEGACY + 106) +#define MX50_INT_MSHC (NR_IRQS_LEGACY + 109) +#define MX50_INT_APBHDMA_CHAN0 (NR_IRQS_LEGACY + 110) +#define MX50_INT_APBHDMA_CHAN1 (NR_IRQS_LEGACY + 111) +#define MX50_INT_APBHDMA_CHAN2 (NR_IRQS_LEGACY + 112) +#define MX50_INT_APBHDMA_CHAN3 (NR_IRQS_LEGACY + 113) +#define MX50_INT_APBHDMA_CHAN4 (NR_IRQS_LEGACY + 114) +#define MX50_INT_APBHDMA_CHAN5 (NR_IRQS_LEGACY + 115) +#define MX50_INT_APBHDMA_CHAN6 (NR_IRQS_LEGACY + 116) +#define MX50_INT_APBHDMA_CHAN7 (NR_IRQS_LEGACY + 117) #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) extern int mx50_revision(void); diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h index cdf07c65ec1e..af844f76261a 100644 --- a/arch/arm/plat-mxc/include/mach/mx51.h +++ b/arch/arm/plat-mxc/include/mach/mx51.h @@ -232,110 +232,111 @@ /* * Interrupt numbers */ -#define MX51_INT_BASE 0 -#define MX51_INT_RESV0 0 -#define MX51_INT_ESDHC1 1 -#define MX51_INT_ESDHC2 2 -#define MX51_INT_ESDHC3 3 -#define MX51_INT_ESDHC4 4 -#define MX51_INT_RESV5 5 -#define MX51_INT_SDMA 6 -#define MX51_INT_IOMUX 7 -#define MX51_INT_NFC 8 -#define MX51_INT_VPU 9 -#define MX51_INT_IPU_ERR 10 -#define MX51_INT_IPU_SYN 11 -#define MX51_INT_GPU 12 -#define MX51_INT_RESV13 13 -#define MX51_INT_USB_HS1 14 -#define MX51_INT_EMI 15 -#define MX51_INT_USB_HS2 16 -#define MX51_INT_USB_HS3 17 -#define MX51_INT_USB_OTG 18 -#define MX51_INT_SAHARA_H0 19 -#define MX51_INT_SAHARA_H1 20 -#define MX51_INT_SCC_SMN 21 -#define MX51_INT_SCC_STZ 22 -#define MX51_INT_SCC_SCM 23 -#define MX51_INT_SRTC_NTZ 24 -#define MX51_INT_SRTC_TZ 25 -#define MX51_INT_RTIC 26 -#define MX51_INT_CSU 27 -#define MX51_INT_SLIM_B 28 -#define MX51_INT_SSI1 29 -#define MX51_INT_SSI2 30 -#define MX51_INT_UART1 31 -#define MX51_INT_UART2 32 -#define MX51_INT_UART3 33 -#define MX51_INT_RESV34 34 -#define MX51_INT_RESV35 35 -#define MX51_INT_ECSPI1 36 -#define MX51_INT_ECSPI2 37 -#define MX51_INT_CSPI 38 -#define MX51_INT_GPT 39 -#define MX51_INT_EPIT1 40 -#define MX51_INT_EPIT2 41 -#define MX51_INT_GPIO1_INT7 42 -#define MX51_INT_GPIO1_INT6 43 -#define MX51_INT_GPIO1_INT5 44 -#define MX51_INT_GPIO1_INT4 45 -#define MX51_INT_GPIO1_INT3 46 -#define MX51_INT_GPIO1_INT2 47 -#define MX51_INT_GPIO1_INT1 48 -#define MX51_INT_GPIO1_INT0 49 -#define MX51_INT_GPIO1_LOW 50 -#define MX51_INT_GPIO1_HIGH 51 -#define MX51_INT_GPIO2_LOW 52 -#define MX51_INT_GPIO2_HIGH 53 -#define MX51_INT_GPIO3_LOW 54 -#define MX51_INT_GPIO3_HIGH 55 -#define MX51_INT_GPIO4_LOW 56 -#define MX51_INT_GPIO4_HIGH 57 -#define MX51_INT_WDOG1 58 -#define MX51_INT_WDOG2 59 -#define MX51_INT_KPP 60 -#define MX51_INT_PWM1 61 -#define MX51_INT_I2C1 62 -#define MX51_INT_I2C2 63 -#define MX51_INT_HS_I2C 64 -#define MX51_INT_RESV65 65 -#define MX51_INT_RESV66 66 -#define MX51_INT_SIM_IPB 67 -#define MX51_INT_SIM_DAT 68 -#define MX51_INT_IIM 69 -#define MX51_INT_ATA 70 -#define MX51_INT_CCM1 71 -#define MX51_INT_CCM2 72 -#define MX51_INT_GPC1 73 -#define MX51_INT_GPC2 74 -#define MX51_INT_SRC 75 -#define MX51_INT_NM 76 -#define MX51_INT_PMU 77 -#define MX51_INT_CTI_IRQ 78 -#define MX51_INT_CTI1_TG0 79 -#define MX51_INT_CTI1_TG1 80 -#define MX51_INT_MCG_ERR 81 -#define MX51_INT_MCG_TMR 82 -#define MX51_INT_MCG_FUNC 83 -#define MX51_INT_GPU2_IRQ 84 -#define MX51_INT_GPU2_BUSY 85 -#define MX51_INT_RESV86 86 -#define MX51_INT_FEC 87 -#define MX51_INT_OWIRE 88 -#define MX51_INT_CTI1_TG2 89 -#define MX51_INT_SJC 90 -#define MX51_INT_SPDIF 91 -#define MX51_INT_TVE 92 -#define MX51_INT_FIRI 93 -#define MX51_INT_PWM2 94 -#define MX51_INT_SLIM_EXP 95 -#define MX51_INT_SSI3 96 -#define MX51_INT_EMI_BOOT 97 -#define MX51_INT_CTI1_TG3 98 -#define MX51_INT_SMC_RX 99 -#define MX51_INT_VPU_IDLE 100 -#define MX51_INT_EMI_NFC 101 -#define MX51_INT_GPU_IDLE 102 +#include <asm/irq.h> +#define MX51_INT_BASE (NR_IRQS_LEGACY + 0) +#define MX51_INT_RESV0 (NR_IRQS_LEGACY + 0) +#define MX51_INT_ESDHC1 (NR_IRQS_LEGACY + 1) +#define MX51_INT_ESDHC2 (NR_IRQS_LEGACY + 2) +#define MX51_INT_ESDHC3 (NR_IRQS_LEGACY + 3) +#define MX51_INT_ESDHC4 (NR_IRQS_LEGACY + 4) +#define MX51_INT_RESV5 (NR_IRQS_LEGACY + 5) +#define MX51_INT_SDMA (NR_IRQS_LEGACY + 6) +#define MX51_INT_IOMUX (NR_IRQS_LEGACY + 7) +#define MX51_INT_NFC (NR_IRQS_LEGACY + 8) +#define MX51_INT_VPU (NR_IRQS_LEGACY + 9) +#define MX51_INT_IPU_ERR (NR_IRQS_LEGACY + 10) +#define MX51_INT_IPU_SYN (NR_IRQS_LEGACY + 11) +#define MX51_INT_GPU (NR_IRQS_LEGACY + 12) +#define MX51_INT_RESV13 (NR_IRQS_LEGACY + 13) +#define MX51_INT_USB_HS1 (NR_IRQS_LEGACY + 14) +#define MX51_INT_EMI (NR_IRQS_LEGACY + 15) +#define MX51_INT_USB_HS2 (NR_IRQS_LEGACY + 16) +#define MX51_INT_USB_HS3 (NR_IRQS_LEGACY + 17) +#define MX51_INT_USB_OTG (NR_IRQS_LEGACY + 18) +#define MX51_INT_SAHARA_H0 (NR_IRQS_LEGACY + 19) +#define MX51_INT_SAHARA_H1 (NR_IRQS_LEGACY + 20) +#define MX51_INT_SCC_SMN (NR_IRQS_LEGACY + 21) +#define MX51_INT_SCC_STZ (NR_IRQS_LEGACY + 22) +#define MX51_INT_SCC_SCM (NR_IRQS_LEGACY + 23) +#define MX51_INT_SRTC_NTZ (NR_IRQS_LEGACY + 24) +#define MX51_INT_SRTC_TZ (NR_IRQS_LEGACY + 25) +#define MX51_INT_RTIC (NR_IRQS_LEGACY + 26) +#define MX51_INT_CSU (NR_IRQS_LEGACY + 27) +#define MX51_INT_SLIM_B (NR_IRQS_LEGACY + 28) +#define MX51_INT_SSI1 (NR_IRQS_LEGACY + 29) +#define MX51_INT_SSI2 (NR_IRQS_LEGACY + 30) +#define MX51_INT_UART1 (NR_IRQS_LEGACY + 31) +#define MX51_INT_UART2 (NR_IRQS_LEGACY + 32) +#define MX51_INT_UART3 (NR_IRQS_LEGACY + 33) +#define MX51_INT_RESV34 (NR_IRQS_LEGACY + 34) +#define MX51_INT_RESV35 (NR_IRQS_LEGACY + 35) +#define MX51_INT_ECSPI1 (NR_IRQS_LEGACY + 36) +#define MX51_INT_ECSPI2 (NR_IRQS_LEGACY + 37) +#define MX51_INT_CSPI (NR_IRQS_LEGACY + 38) +#define MX51_INT_GPT (NR_IRQS_LEGACY + 39) +#define MX51_INT_EPIT1 (NR_IRQS_LEGACY + 40) +#define MX51_INT_EPIT2 (NR_IRQS_LEGACY + 41) +#define MX51_INT_GPIO1_INT7 (NR_IRQS_LEGACY + 42) +#define MX51_INT_GPIO1_INT6 (NR_IRQS_LEGACY + 43) +#define MX51_INT_GPIO1_INT5 (NR_IRQS_LEGACY + 44) +#define MX51_INT_GPIO1_INT4 (NR_IRQS_LEGACY + 45) +#define MX51_INT_GPIO1_INT3 (NR_IRQS_LEGACY + 46) +#define MX51_INT_GPIO1_INT2 (NR_IRQS_LEGACY + 47) +#define MX51_INT_GPIO1_INT1 (NR_IRQS_LEGACY + 48) +#define MX51_INT_GPIO1_INT0 (NR_IRQS_LEGACY + 49) +#define MX51_INT_GPIO1_LOW (NR_IRQS_LEGACY + 50) +#define MX51_INT_GPIO1_HIGH (NR_IRQS_LEGACY + 51) +#define MX51_INT_GPIO2_LOW (NR_IRQS_LEGACY + 52) +#define MX51_INT_GPIO2_HIGH (NR_IRQS_LEGACY + 53) +#define MX51_INT_GPIO3_LOW (NR_IRQS_LEGACY + 54) +#define MX51_INT_GPIO3_HIGH (NR_IRQS_LEGACY + 55) +#define MX51_INT_GPIO4_LOW (NR_IRQS_LEGACY + 56) +#define MX51_INT_GPIO4_HIGH (NR_IRQS_LEGACY + 57) +#define MX51_INT_WDOG1 (NR_IRQS_LEGACY + 58) +#define MX51_INT_WDOG2 (NR_IRQS_LEGACY + 59) +#define MX51_INT_KPP (NR_IRQS_LEGACY + 60) +#define MX51_INT_PWM1 (NR_IRQS_LEGACY + 61) +#define MX51_INT_I2C1 (NR_IRQS_LEGACY + 62) +#define MX51_INT_I2C2 (NR_IRQS_LEGACY + 63) +#define MX51_INT_HS_I2C (NR_IRQS_LEGACY + 64) +#define MX51_INT_RESV65 (NR_IRQS_LEGACY + 65) +#define MX51_INT_RESV66 (NR_IRQS_LEGACY + 66) +#define MX51_INT_SIM_IPB (NR_IRQS_LEGACY + 67) +#define MX51_INT_SIM_DAT (NR_IRQS_LEGACY + 68) +#define MX51_INT_IIM (NR_IRQS_LEGACY + 69) +#define MX51_INT_ATA (NR_IRQS_LEGACY + 70) +#define MX51_INT_CCM1 (NR_IRQS_LEGACY + 71) +#define MX51_INT_CCM2 (NR_IRQS_LEGACY + 72) +#define MX51_INT_GPC1 (NR_IRQS_LEGACY + 73) +#define MX51_INT_GPC2 (NR_IRQS_LEGACY + 74) +#define MX51_INT_SRC (NR_IRQS_LEGACY + 75) +#define MX51_INT_NM (NR_IRQS_LEGACY + 76) +#define MX51_INT_PMU (NR_IRQS_LEGACY + 77) +#define MX51_INT_CTI_IRQ (NR_IRQS_LEGACY + 78) +#define MX51_INT_CTI1_TG0 (NR_IRQS_LEGACY + 79) +#define MX51_INT_CTI1_TG1 (NR_IRQS_LEGACY + 80) +#define MX51_INT_MCG_ERR (NR_IRQS_LEGACY + 81) +#define MX51_INT_MCG_TMR (NR_IRQS_LEGACY + 82) +#define MX51_INT_MCG_FUNC (NR_IRQS_LEGACY + 83) +#define MX51_INT_GPU2_IRQ (NR_IRQS_LEGACY + 84) +#define MX51_INT_GPU2_BUSY (NR_IRQS_LEGACY + 85) +#define MX51_INT_RESV86 (NR_IRQS_LEGACY + 86) +#define MX51_INT_FEC (NR_IRQS_LEGACY + 87) +#define MX51_INT_OWIRE (NR_IRQS_LEGACY + 88) +#define MX51_INT_CTI1_TG2 (NR_IRQS_LEGACY + 89) +#define MX51_INT_SJC (NR_IRQS_LEGACY + 90) +#define MX51_INT_SPDIF (NR_IRQS_LEGACY + 91) +#define MX51_INT_TVE (NR_IRQS_LEGACY + 92) +#define MX51_INT_FIRI (NR_IRQS_LEGACY + 93) +#define MX51_INT_PWM2 (NR_IRQS_LEGACY + 94) +#define MX51_INT_SLIM_EXP (NR_IRQS_LEGACY + 95) +#define MX51_INT_SSI3 (NR_IRQS_LEGACY + 96) +#define MX51_INT_EMI_BOOT (NR_IRQS_LEGACY + 97) +#define MX51_INT_CTI1_TG3 (NR_IRQS_LEGACY + 98) +#define MX51_INT_SMC_RX (NR_IRQS_LEGACY + 99) +#define MX51_INT_VPU_IDLE (NR_IRQS_LEGACY + 100) +#define MX51_INT_EMI_NFC (NR_IRQS_LEGACY + 101) +#define MX51_INT_GPU_IDLE (NR_IRQS_LEGACY + 102) #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) extern int mx51_revision(void); diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/plat-mxc/include/mach/mx53.h index a37e8c353994..f829d1c22501 100644 --- a/arch/arm/plat-mxc/include/mach/mx53.h +++ b/arch/arm/plat-mxc/include/mach/mx53.h @@ -229,113 +229,114 @@ /* * Interrupt numbers */ -#define MX53_INT_RESV0 0 -#define MX53_INT_ESDHC1 1 -#define MX53_INT_ESDHC2 2 -#define MX53_INT_ESDHC3 3 -#define MX53_INT_ESDHC4 4 -#define MX53_INT_DAP 5 -#define MX53_INT_SDMA 6 -#define MX53_INT_IOMUX 7 -#define MX53_INT_NFC 8 -#define MX53_INT_VPU 9 -#define MX53_INT_IPU_ERR 10 -#define MX53_INT_IPU_SYN 11 -#define MX53_INT_GPU 12 -#define MX53_INT_UART4 13 -#define MX53_INT_USB_H1 14 -#define MX53_INT_EMI 15 -#define MX53_INT_USB_H2 16 -#define MX53_INT_USB_H3 17 -#define MX53_INT_USB_OTG 18 -#define MX53_INT_SAHARA_H0 19 -#define MX53_INT_SAHARA_H1 20 -#define MX53_INT_SCC_SMN 21 -#define MX53_INT_SCC_STZ 22 -#define MX53_INT_SCC_SCM 23 -#define MX53_INT_SRTC_NTZ 24 -#define MX53_INT_SRTC_TZ 25 -#define MX53_INT_RTIC 26 -#define MX53_INT_CSU 27 -#define MX53_INT_SATA 28 -#define MX53_INT_SSI1 29 -#define MX53_INT_SSI2 30 -#define MX53_INT_UART1 31 -#define MX53_INT_UART2 32 -#define MX53_INT_UART3 33 -#define MX53_INT_RTC 34 -#define MX53_INT_PTP 35 -#define MX53_INT_ECSPI1 36 -#define MX53_INT_ECSPI2 37 -#define MX53_INT_CSPI 38 -#define MX53_INT_GPT 39 -#define MX53_INT_EPIT1 40 -#define MX53_INT_EPIT2 41 -#define MX53_INT_GPIO1_INT7 42 -#define MX53_INT_GPIO1_INT6 43 -#define MX53_INT_GPIO1_INT5 44 -#define MX53_INT_GPIO1_INT4 45 -#define MX53_INT_GPIO1_INT3 46 -#define MX53_INT_GPIO1_INT2 47 -#define MX53_INT_GPIO1_INT1 48 -#define MX53_INT_GPIO1_INT0 49 -#define MX53_INT_GPIO1_LOW 50 -#define MX53_INT_GPIO1_HIGH 51 -#define MX53_INT_GPIO2_LOW 52 -#define MX53_INT_GPIO2_HIGH 53 -#define MX53_INT_GPIO3_LOW 54 -#define MX53_INT_GPIO3_HIGH 55 -#define MX53_INT_GPIO4_LOW 56 -#define MX53_INT_GPIO4_HIGH 57 -#define MX53_INT_WDOG1 58 -#define MX53_INT_WDOG2 59 -#define MX53_INT_KPP 60 -#define MX53_INT_PWM1 61 -#define MX53_INT_I2C1 62 -#define MX53_INT_I2C2 63 -#define MX53_INT_I2C3 64 -#define MX53_INT_MLB 65 -#define MX53_INT_ASRC 66 -#define MX53_INT_SPDIF 67 -#define MX53_INT_SIM_DAT 68 -#define MX53_INT_IIM 69 -#define MX53_INT_ATA 70 -#define MX53_INT_CCM1 71 -#define MX53_INT_CCM2 72 -#define MX53_INT_GPC1 73 -#define MX53_INT_GPC2 74 -#define MX53_INT_SRC 75 -#define MX53_INT_NM 76 -#define MX53_INT_PMU 77 -#define MX53_INT_CTI_IRQ 78 -#define MX53_INT_CTI1_TG0 79 -#define MX53_INT_CTI1_TG1 80 -#define MX53_INT_ESAI 81 -#define MX53_INT_CAN1 82 -#define MX53_INT_CAN2 83 -#define MX53_INT_GPU2_IRQ 84 -#define MX53_INT_GPU2_BUSY 85 -#define MX53_INT_UART5 86 -#define MX53_INT_FEC 87 -#define MX53_INT_OWIRE 88 -#define MX53_INT_CTI1_TG2 89 -#define MX53_INT_SJC 90 -#define MX53_INT_TVE 92 -#define MX53_INT_FIRI 93 -#define MX53_INT_PWM2 94 -#define MX53_INT_SLIM_EXP 95 -#define MX53_INT_SSI3 96 -#define MX53_INT_EMI_BOOT 97 -#define MX53_INT_CTI1_TG3 98 -#define MX53_INT_SMC_RX 99 -#define MX53_INT_VPU_IDLE 100 -#define MX53_INT_EMI_NFC 101 -#define MX53_INT_GPU_IDLE 102 -#define MX53_INT_GPIO5_LOW 103 -#define MX53_INT_GPIO5_HIGH 104 -#define MX53_INT_GPIO6_LOW 105 -#define MX53_INT_GPIO6_HIGH 106 -#define MX53_INT_GPIO7_LOW 107 -#define MX53_INT_GPIO7_HIGH 108 +#include <asm/irq.h> +#define MX53_INT_RESV0 (NR_IRQS_LEGACY + 0) +#define MX53_INT_ESDHC1 (NR_IRQS_LEGACY + 1) +#define MX53_INT_ESDHC2 (NR_IRQS_LEGACY + 2) +#define MX53_INT_ESDHC3 (NR_IRQS_LEGACY + 3) +#define MX53_INT_ESDHC4 (NR_IRQS_LEGACY + 4) +#define MX53_INT_DAP (NR_IRQS_LEGACY + 5) +#define MX53_INT_SDMA (NR_IRQS_LEGACY + 6) +#define MX53_INT_IOMUX (NR_IRQS_LEGACY + 7) +#define MX53_INT_NFC (NR_IRQS_LEGACY + 8) +#define MX53_INT_VPU (NR_IRQS_LEGACY + 9) +#define MX53_INT_IPU_ERR (NR_IRQS_LEGACY + 10) +#define MX53_INT_IPU_SYN (NR_IRQS_LEGACY + 11) +#define MX53_INT_GPU (NR_IRQS_LEGACY + 12) +#define MX53_INT_UART4 (NR_IRQS_LEGACY + 13) +#define MX53_INT_USB_H1 (NR_IRQS_LEGACY + 14) +#define MX53_INT_EMI (NR_IRQS_LEGACY + 15) +#define MX53_INT_USB_H2 (NR_IRQS_LEGACY + 16) +#define MX53_INT_USB_H3 (NR_IRQS_LEGACY + 17) +#define MX53_INT_USB_OTG (NR_IRQS_LEGACY + 18) +#define MX53_INT_SAHARA_H0 (NR_IRQS_LEGACY + 19) +#define MX53_INT_SAHARA_H1 (NR_IRQS_LEGACY + 20) +#define MX53_INT_SCC_SMN (NR_IRQS_LEGACY + 21) +#define MX53_INT_SCC_STZ (NR_IRQS_LEGACY + 22) +#define MX53_INT_SCC_SCM (NR_IRQS_LEGACY + 23) +#define MX53_INT_SRTC_NTZ (NR_IRQS_LEGACY + 24) +#define MX53_INT_SRTC_TZ (NR_IRQS_LEGACY + 25) +#define MX53_INT_RTIC (NR_IRQS_LEGACY + 26) +#define MX53_INT_CSU (NR_IRQS_LEGACY + 27) +#define MX53_INT_SATA (NR_IRQS_LEGACY + 28) +#define MX53_INT_SSI1 (NR_IRQS_LEGACY + 29) +#define MX53_INT_SSI2 (NR_IRQS_LEGACY + 30) +#define MX53_INT_UART1 (NR_IRQS_LEGACY + 31) +#define MX53_INT_UART2 (NR_IRQS_LEGACY + 32) +#define MX53_INT_UART3 (NR_IRQS_LEGACY + 33) +#define MX53_INT_RTC (NR_IRQS_LEGACY + 34) +#define MX53_INT_PTP (NR_IRQS_LEGACY + 35) +#define MX53_INT_ECSPI1 (NR_IRQS_LEGACY + 36) +#define MX53_INT_ECSPI2 (NR_IRQS_LEGACY + 37) +#define MX53_INT_CSPI (NR_IRQS_LEGACY + 38) +#define MX53_INT_GPT (NR_IRQS_LEGACY + 39) +#define MX53_INT_EPIT1 (NR_IRQS_LEGACY + 40) +#define MX53_INT_EPIT2 (NR_IRQS_LEGACY + 41) +#define MX53_INT_GPIO1_INT7 (NR_IRQS_LEGACY + 42) +#define MX53_INT_GPIO1_INT6 (NR_IRQS_LEGACY + 43) +#define MX53_INT_GPIO1_INT5 (NR_IRQS_LEGACY + 44) +#define MX53_INT_GPIO1_INT4 (NR_IRQS_LEGACY + 45) +#define MX53_INT_GPIO1_INT3 (NR_IRQS_LEGACY + 46) +#define MX53_INT_GPIO1_INT2 (NR_IRQS_LEGACY + 47) +#define MX53_INT_GPIO1_INT1 (NR_IRQS_LEGACY + 48) +#define MX53_INT_GPIO1_INT0 (NR_IRQS_LEGACY + 49) +#define MX53_INT_GPIO1_LOW (NR_IRQS_LEGACY + 50) +#define MX53_INT_GPIO1_HIGH (NR_IRQS_LEGACY + 51) +#define MX53_INT_GPIO2_LOW (NR_IRQS_LEGACY + 52) +#define MX53_INT_GPIO2_HIGH (NR_IRQS_LEGACY + 53) +#define MX53_INT_GPIO3_LOW (NR_IRQS_LEGACY + 54) +#define MX53_INT_GPIO3_HIGH (NR_IRQS_LEGACY + 55) +#define MX53_INT_GPIO4_LOW (NR_IRQS_LEGACY + 56) +#define MX53_INT_GPIO4_HIGH (NR_IRQS_LEGACY + 57) +#define MX53_INT_WDOG1 (NR_IRQS_LEGACY + 58) +#define MX53_INT_WDOG2 (NR_IRQS_LEGACY + 59) +#define MX53_INT_KPP (NR_IRQS_LEGACY + 60) +#define MX53_INT_PWM1 (NR_IRQS_LEGACY + 61) +#define MX53_INT_I2C1 (NR_IRQS_LEGACY + 62) +#define MX53_INT_I2C2 (NR_IRQS_LEGACY + 63) +#define MX53_INT_I2C3 (NR_IRQS_LEGACY + 64) +#define MX53_INT_MLB (NR_IRQS_LEGACY + 65) +#define MX53_INT_ASRC (NR_IRQS_LEGACY + 66) +#define MX53_INT_SPDIF (NR_IRQS_LEGACY + 67) +#define MX53_INT_SIM_DAT (NR_IRQS_LEGACY + 68) +#define MX53_INT_IIM (NR_IRQS_LEGACY + 69) +#define MX53_INT_ATA (NR_IRQS_LEGACY + 70) +#define MX53_INT_CCM1 (NR_IRQS_LEGACY + 71) +#define MX53_INT_CCM2 (NR_IRQS_LEGACY + 72) +#define MX53_INT_GPC1 (NR_IRQS_LEGACY + 73) +#define MX53_INT_GPC2 (NR_IRQS_LEGACY + 74) +#define MX53_INT_SRC (NR_IRQS_LEGACY + 75) +#define MX53_INT_NM (NR_IRQS_LEGACY + 76) +#define MX53_INT_PMU (NR_IRQS_LEGACY + 77) +#define MX53_INT_CTI_IRQ (NR_IRQS_LEGACY + 78) +#define MX53_INT_CTI1_TG0 (NR_IRQS_LEGACY + 79) +#define MX53_INT_CTI1_TG1 (NR_IRQS_LEGACY + 80) +#define MX53_INT_ESAI (NR_IRQS_LEGACY + 81) +#define MX53_INT_CAN1 (NR_IRQS_LEGACY + 82) +#define MX53_INT_CAN2 (NR_IRQS_LEGACY + 83) +#define MX53_INT_GPU2_IRQ (NR_IRQS_LEGACY + 84) +#define MX53_INT_GPU2_BUSY (NR_IRQS_LEGACY + 85) +#define MX53_INT_UART5 (NR_IRQS_LEGACY + 86) +#define MX53_INT_FEC (NR_IRQS_LEGACY + 87) +#define MX53_INT_OWIRE (NR_IRQS_LEGACY + 88) +#define MX53_INT_CTI1_TG2 (NR_IRQS_LEGACY + 89) +#define MX53_INT_SJC (NR_IRQS_LEGACY + 90) +#define MX53_INT_TVE (NR_IRQS_LEGACY + 92) +#define MX53_INT_FIRI (NR_IRQS_LEGACY + 93) +#define MX53_INT_PWM2 (NR_IRQS_LEGACY + 94) +#define MX53_INT_SLIM_EXP (NR_IRQS_LEGACY + 95) +#define MX53_INT_SSI3 (NR_IRQS_LEGACY + 96) +#define MX53_INT_EMI_BOOT (NR_IRQS_LEGACY + 97) +#define MX53_INT_CTI1_TG3 (NR_IRQS_LEGACY + 98) +#define MX53_INT_SMC_RX (NR_IRQS_LEGACY + 99) +#define MX53_INT_VPU_IDLE (NR_IRQS_LEGACY + 100) +#define MX53_INT_EMI_NFC (NR_IRQS_LEGACY + 101) +#define MX53_INT_GPU_IDLE (NR_IRQS_LEGACY + 102) +#define MX53_INT_GPIO5_LOW (NR_IRQS_LEGACY + 103) +#define MX53_INT_GPIO5_HIGH (NR_IRQS_LEGACY + 104) +#define MX53_INT_GPIO6_LOW (NR_IRQS_LEGACY + 105) +#define MX53_INT_GPIO6_HIGH (NR_IRQS_LEGACY + 106) +#define MX53_INT_GPIO7_LOW (NR_IRQS_LEGACY + 107) +#define MX53_INT_GPIO7_HIGH (NR_IRQS_LEGACY + 108) #endif /* ifndef __MACH_MX53_H__ */ diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c index 98308ec1f321..c60a7e416385 100644 --- a/arch/arm/plat-mxc/tzic.c +++ b/arch/arm/plat-mxc/tzic.c @@ -15,6 +15,8 @@ #include <linux/device.h> #include <linux/errno.h> #include <linux/io.h> +#include <linux/irqdomain.h> +#include <linux/of.h> #include <asm/mach/irq.h> #include <asm/exception.h> @@ -49,6 +51,7 @@ #define TZIC_ID0 0x0FD0 /* Indentification Register 0 */ void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */ +static struct irq_domain *domain; #define TZIC_NUM_IRQS 128 @@ -77,15 +80,14 @@ static int tzic_set_irq_fiq(unsigned int irq, unsigned int type) static void tzic_irq_suspend(struct irq_data *d) { struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); - int idx = gc->irq_base >> 5; + int idx = d->hwirq >> 5; __raw_writel(gc->wake_active, tzic_base + TZIC_WAKEUP0(idx)); } static void tzic_irq_resume(struct irq_data *d) { - struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); - int idx = gc->irq_base >> 5; + int idx = d->hwirq >> 5; __raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(idx)), tzic_base + TZIC_WAKEUP0(idx)); @@ -102,11 +104,10 @@ static struct mxc_extra_irq tzic_extra_irq = { #endif }; -static __init void tzic_init_gc(unsigned int irq_start) +static __init void tzic_init_gc(int idx, unsigned int irq_start) { struct irq_chip_generic *gc; struct irq_chip_type *ct; - int idx = irq_start >> 5; gc = irq_alloc_generic_chip("tzic", 1, irq_start, tzic_base, handle_level_irq); @@ -140,7 +141,8 @@ asmlinkage void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs) while (stat) { handled = 1; irqofs = fls(stat) - 1; - handle_IRQ(irqofs + i * 32, regs); + handle_IRQ(irq_find_mapping(domain, + irqofs + i * 32), regs); stat &= ~(1 << irqofs); } } @@ -154,6 +156,8 @@ asmlinkage void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs) */ void __init tzic_init_irq(void __iomem *irqbase) { + struct device_node *np; + int irq_base; int i; tzic_base = irqbase; @@ -175,12 +179,20 @@ void __init tzic_init_irq(void __iomem *irqbase) /* all IRQ no FIQ Warning :: No selection */ - for (i = 0; i < TZIC_NUM_IRQS; i += 32) - tzic_init_gc(i); + irq_base = irq_alloc_descs(-1, 0, TZIC_NUM_IRQS, numa_node_id()); + WARN_ON(irq_base < 0); + + np = of_find_compatible_node(NULL, NULL, "fsl,tzic"); + domain = irq_domain_add_legacy(np, TZIC_NUM_IRQS, irq_base, 0, + &irq_domain_simple_ops, NULL); + WARN_ON(!domain); + + for (i = 0; i < 4; i++, irq_base += 32) + tzic_init_gc(i, irq_base); #ifdef CONFIG_FIQ /* Initialize FIQ */ - init_FIQ(); + init_FIQ(FIQ_START); #endif pr_info("TrustZone Interrupt Controller (TZIC) initialized\n"); diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c index bc42c04091fd..fe57bbbf166b 100644 --- a/arch/arm/plat-s3c24xx/irq.c +++ b/arch/arm/plat-s3c24xx/irq.c @@ -533,7 +533,7 @@ void __init s3c24xx_init_irq(void) int i; #ifdef CONFIG_FIQ - init_FIQ(); + init_FIQ(FIQ_START); #endif irqdbf("s3c2410_init_irq: clearing interrupt status flags\n"); diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c index 5ec72044ea4c..c7573e50aa14 100644 --- a/drivers/dma/ipu/ipu_idmac.c +++ b/drivers/dma/ipu/ipu_idmac.c @@ -1663,7 +1663,6 @@ static void __exit ipu_idmac_exit(struct ipu *ipu) static int __init ipu_probe(struct platform_device *pdev) { - struct ipu_platform_data *pdata = pdev->dev.platform_data; struct resource *mem_ipu, *mem_ic; int ret; @@ -1671,7 +1670,7 @@ static int __init ipu_probe(struct platform_device *pdev) mem_ipu = platform_get_resource(pdev, IORESOURCE_MEM, 0); mem_ic = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!pdata || !mem_ipu || !mem_ic) + if (!mem_ipu || !mem_ic) return -EINVAL; ipu_data.dev = &pdev->dev; @@ -1688,10 +1687,9 @@ static int __init ipu_probe(struct platform_device *pdev) goto err_noirq; ipu_data.irq_err = ret; - ipu_data.irq_base = pdata->irq_base; - dev_dbg(&pdev->dev, "fn irq %u, err irq %u, irq-base %u\n", - ipu_data.irq_fn, ipu_data.irq_err, ipu_data.irq_base); + dev_dbg(&pdev->dev, "fn irq %u, err irq %u\n", + ipu_data.irq_fn, ipu_data.irq_err); /* Remap IPU common registers */ ipu_data.reg_ipu = ioremap(mem_ipu->start, resource_size(mem_ipu)); diff --git a/drivers/dma/ipu/ipu_irq.c b/drivers/dma/ipu/ipu_irq.c index a71f55e72be9..fa95bcc3de1f 100644 --- a/drivers/dma/ipu/ipu_irq.c +++ b/drivers/dma/ipu/ipu_irq.c @@ -14,6 +14,7 @@ #include <linux/clk.h> #include <linux/irq.h> #include <linux/io.h> +#include <linux/module.h> #include <mach/ipu.h> @@ -354,10 +355,12 @@ static struct irq_chip ipu_irq_chip = { /* Install the IRQ handler */ int __init ipu_irq_attach_irq(struct ipu *ipu, struct platform_device *dev) { - struct ipu_platform_data *pdata = dev->dev.platform_data; - unsigned int irq, irq_base, i; + unsigned int irq, i; + int irq_base = irq_alloc_descs(-1, 0, CONFIG_MX3_IPU_IRQS, + numa_node_id()); - irq_base = pdata->irq_base; + if (irq_base < 0) + return irq_base; for (i = 0; i < IPU_IRQ_NR_BANKS; i++) irq_bank[i].ipu = ipu; @@ -387,15 +390,16 @@ int __init ipu_irq_attach_irq(struct ipu *ipu, struct platform_device *dev) irq_set_handler_data(ipu->irq_err, ipu); irq_set_chained_handler(ipu->irq_err, ipu_irq_err); + ipu->irq_base = irq_base; + return 0; } void ipu_irq_detach_irq(struct ipu *ipu, struct platform_device *dev) { - struct ipu_platform_data *pdata = dev->dev.platform_data; unsigned int irq, irq_base; - irq_base = pdata->irq_base; + irq_base = ipu->irq_base; irq_set_chained_handler(ipu->irq_fn, NULL); irq_set_handler_data(ipu->irq_fn, NULL); diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c index c89c4c1e668d..04691d3abe60 100644 --- a/drivers/gpio/gpio-mxc.c +++ b/drivers/gpio/gpio-mxc.c @@ -23,6 +23,7 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/irq.h> +#include <linux/irqdomain.h> #include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/slab.h> @@ -33,8 +34,6 @@ #include <asm-generic/bug.h> #include <asm/mach/irq.h> -#define irq_to_gpio(irq) ((irq) - MXC_GPIO_IRQ_START) - enum mxc_gpio_hwtype { IMX1_GPIO, /* runs on i.mx1 */ IMX21_GPIO, /* runs on i.mx21 and i.mx27 */ @@ -61,7 +60,7 @@ struct mxc_gpio_port { void __iomem *base; int irq; int irq_high; - int virtual_irq_start; + struct irq_domain *domain; struct bgpio_chip bgc; u32 both_edges; }; @@ -144,14 +143,15 @@ static LIST_HEAD(mxc_gpio_ports); static int gpio_set_irq_type(struct irq_data *d, u32 type) { - u32 gpio = irq_to_gpio(d->irq); struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); struct mxc_gpio_port *port = gc->private; u32 bit, val; + u32 gpio_idx = d->hwirq; + u32 gpio = port->bgc.gc.base + gpio_idx; int edge; void __iomem *reg = port->base; - port->both_edges &= ~(1 << (gpio & 31)); + port->both_edges &= ~(1 << gpio_idx); switch (type) { case IRQ_TYPE_EDGE_RISING: edge = GPIO_INT_RISE_EDGE; @@ -168,7 +168,7 @@ static int gpio_set_irq_type(struct irq_data *d, u32 type) edge = GPIO_INT_HIGH_LEV; pr_debug("mxc: set GPIO %d to high trigger\n", gpio); } - port->both_edges |= 1 << (gpio & 31); + port->both_edges |= 1 << gpio_idx; break; case IRQ_TYPE_LEVEL_LOW: edge = GPIO_INT_LOW_LEV; @@ -180,11 +180,11 @@ static int gpio_set_irq_type(struct irq_data *d, u32 type) return -EINVAL; } - reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */ - bit = gpio & 0xf; + reg += GPIO_ICR1 + ((gpio_idx & 0x10) >> 2); /* ICR1 or ICR2 */ + bit = gpio_idx & 0xf; val = readl(reg) & ~(0x3 << (bit << 1)); writel(val | (edge << (bit << 1)), reg); - writel(1 << (gpio & 0x1f), port->base + GPIO_ISR); + writel(1 << gpio_idx, port->base + GPIO_ISR); return 0; } @@ -217,15 +217,13 @@ static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio) /* handle 32 interrupts in one status register */ static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat) { - u32 gpio_irq_no_base = port->virtual_irq_start; - while (irq_stat != 0) { int irqoffset = fls(irq_stat) - 1; if (port->both_edges & (1 << irqoffset)) mxc_flip_edge(port, irqoffset); - generic_handle_irq(gpio_irq_no_base + irqoffset); + generic_handle_irq(irq_find_mapping(port->domain, irqoffset)); irq_stat &= ~(1 << irqoffset); } @@ -276,10 +274,9 @@ static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc) */ static int gpio_set_wake_irq(struct irq_data *d, u32 enable) { - u32 gpio = irq_to_gpio(d->irq); - u32 gpio_idx = gpio & 0x1F; struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); struct mxc_gpio_port *port = gc->private; + u32 gpio_idx = d->hwirq; if (enable) { if (port->irq_high && (gpio_idx >= 16)) @@ -296,12 +293,12 @@ static int gpio_set_wake_irq(struct irq_data *d, u32 enable) return 0; } -static void __init mxc_gpio_init_gc(struct mxc_gpio_port *port) +static void __init mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base) { struct irq_chip_generic *gc; struct irq_chip_type *ct; - gc = irq_alloc_generic_chip("gpio-mxc", 1, port->virtual_irq_start, + gc = irq_alloc_generic_chip("gpio-mxc", 1, irq_base, port->base, handle_level_irq); gc->private = port; @@ -352,7 +349,7 @@ static int mxc_gpio_to_irq(struct gpio_chip *gc, unsigned offset) struct mxc_gpio_port *port = container_of(bgc, struct mxc_gpio_port, bgc); - return port->virtual_irq_start + offset; + return irq_find_mapping(port->domain, offset); } static int __devinit mxc_gpio_probe(struct platform_device *pdev) @@ -360,6 +357,7 @@ static int __devinit mxc_gpio_probe(struct platform_device *pdev) struct device_node *np = pdev->dev.of_node; struct mxc_gpio_port *port; struct resource *iores; + int irq_base; int err; mxc_gpio_get_hw(pdev); @@ -432,20 +430,30 @@ static int __devinit mxc_gpio_probe(struct platform_device *pdev) if (err) goto out_bgpio_remove; - /* - * In dt case, we use gpio number range dynamically - * allocated by gpio core. - */ - port->virtual_irq_start = MXC_GPIO_IRQ_START + (np ? port->bgc.gc.base : - pdev->id * 32); + irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id()); + if (irq_base < 0) { + err = irq_base; + goto out_gpiochip_remove; + } + + port->domain = irq_domain_add_legacy(np, 32, irq_base, 0, + &irq_domain_simple_ops, NULL); + if (!port->domain) { + err = -ENODEV; + goto out_irqdesc_free; + } /* gpio-mxc can be a generic irq chip */ - mxc_gpio_init_gc(port); + mxc_gpio_init_gc(port, irq_base); list_add_tail(&port->node, &mxc_gpio_ports); return 0; +out_irqdesc_free: + irq_free_descs(irq_base, 32); +out_gpiochip_remove: + WARN_ON(gpiochip_remove(&port->bgc.gc) < 0); out_bgpio_remove: bgpio_remove(&port->bgc); out_iounmap: diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 8d6b504d65c4..370031ac8200 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -53,7 +53,6 @@ #include <linux/of_i2c.h> #include <linux/pinctrl/consumer.h> -#include <mach/irqs.h> #include <mach/hardware.h> #include <mach/i2c.h> diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c index 4296a8350298..d2e6f82ecfac 100644 --- a/drivers/media/video/mx1_camera.c +++ b/drivers/media/video/mx1_camera.c @@ -43,6 +43,7 @@ #include <asm/fiq.h> #include <mach/dma-mx1-mx2.h> #include <mach/hardware.h> +#include <mach/irqs.h> #include <mach/mx1_camera.h> /* diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 4ef747307ecb..d5c689d6217e 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -169,7 +169,6 @@ #define SERIAL_IMX_MAJOR 207 #define MINOR_START 16 #define DEV_NAME "ttymxc" -#define MAX_INTERNAL_IRQ MXC_INTERNAL_IRQS /* * This determines how often we check the modem status signals @@ -741,10 +740,7 @@ static int imx_startup(struct uart_port *port) /* do not use RTS IRQ on IrDA */ if (!USE_IRDA(sport)) { - retval = request_irq(sport->rtsirq, imx_rtsint, - (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 : - IRQF_TRIGGER_FALLING | - IRQF_TRIGGER_RISING, + retval = request_irq(sport->rtsirq, imx_rtsint, 0, DRIVER_NAME, sport); if (retval) goto error_out3; diff --git a/sound/soc/fsl/imx-pcm-fiq.c b/sound/soc/fsl/imx-pcm-fiq.c index 456b7d723d66..ee27ba3933bd 100644 --- a/sound/soc/fsl/imx-pcm-fiq.c +++ b/sound/soc/fsl/imx-pcm-fiq.c @@ -29,6 +29,7 @@ #include <asm/fiq.h> +#include <mach/irqs.h> #include <mach/ssi.h> #include "imx-ssi.h" |