diff options
40 files changed, 981 insertions, 533 deletions
diff --git a/Documentation/early-userspace/README b/Documentation/early-userspace/README index 270a88e22fb9..cddbac456c29 100644 --- a/Documentation/early-userspace/README +++ b/Documentation/early-userspace/README @@ -28,7 +28,7 @@ the image from specifications. CPIO ARCHIVE method You can create a cpio archive that contains the early userspace image. -Youre cpio archive should be specified in CONFIG_INITRAMFS_SOURCE and it +Your cpio archive should be specified in CONFIG_INITRAMFS_SOURCE and it will be used directly. Only a single cpio file may be specified in CONFIG_INITRAMFS_SOURCE and directory and file names are not allowed in combination with a cpio archive. diff --git a/MAINTAINERS b/MAINTAINERS index 0b03a88e88be..2313de23b0da 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1988,7 +1988,6 @@ PKTCDVD DRIVER P: Peter Osterlund M: petero2@telia.com L: linux-kernel@vger.kernel.org -L: packet-writing@suse.com S: Maintained POSIX CLOCKS and TIMERS diff --git a/arch/arm/configs/enp2611_defconfig b/arch/arm/configs/enp2611_defconfig index 30e6444f9aaa..fd7c0042bcca 100644 --- a/arch/arm/configs/enp2611_defconfig +++ b/arch/arm/configs/enp2611_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13 -# Wed Sep 14 10:51:52 2005 +# Linux kernel version: 2.6.14-git13 +# Thu Nov 10 15:12:48 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set @@ -31,6 +32,7 @@ CONFIG_SYSCTL=y # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set @@ -61,6 +63,23 @@ CONFIG_OBSOLETE_MODPARM=y CONFIG_KMOD=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # System Type # # CONFIG_ARCH_CLPS7500 is not set @@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set @@ -124,7 +144,6 @@ CONFIG_XSCALE_PMU=y CONFIG_ISA_DMA_API=y CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y # CONFIG_PCI_DEBUG is not set # @@ -144,6 +163,8 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ALIGNMENT_TRAP=y # @@ -162,6 +183,7 @@ CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmw # At least one emulation must be selected # CONFIG_FPE_NWFPE=y +CONFIG_FPE_NWFPE_XP=y # CONFIG_FPE_FASTFPE is not set # @@ -205,14 +227,19 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set # +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set @@ -228,6 +255,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -238,6 +269,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -273,6 +305,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -307,7 +340,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set # CONFIG_MTD_ARM_INTEGRATOR is not set CONFIG_MTD_IXP2000=y -# CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PCI is not set # CONFIG_MTD_PLATRAM is not set @@ -334,6 +366,11 @@ CONFIG_MTD_IXP2000=y # CONFIG_MTD_NAND is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -358,21 +395,13 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # @@ -410,12 +439,18 @@ CONFIG_DUMMY=y # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set @@ -455,6 +490,7 @@ CONFIG_EEPRO100=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set @@ -464,6 +500,7 @@ CONFIG_EEPRO100=y # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -609,6 +646,7 @@ CONFIG_IXP2000_WATCHDOG=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -634,7 +672,6 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_ISA is not set CONFIG_I2C_IXP2000=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set @@ -649,7 +686,6 @@ CONFIG_I2C_IXP2000=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set -CONFIG_I2C_SENSOR=y # # Miscellaneous I2C Chip support @@ -662,6 +698,7 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -671,6 +708,7 @@ CONFIG_SENSORS_EEPROM=y # Hardware Monitoring support # CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -701,6 +739,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set @@ -711,6 +750,10 @@ CONFIG_HWMON=y # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -738,6 +781,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -765,10 +812,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -777,6 +820,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -796,11 +840,10 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -816,6 +859,7 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -848,6 +892,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -886,6 +931,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -894,7 +940,9 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y @@ -920,6 +968,7 @@ CONFIG_DEBUG_LL=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y diff --git a/arch/arm/configs/ixdp2400_defconfig b/arch/arm/configs/ixdp2400_defconfig index ddeb9f99d662..e6a4d2656fe5 100644 --- a/arch/arm/configs/ixdp2400_defconfig +++ b/arch/arm/configs/ixdp2400_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13 -# Wed Sep 14 10:52:01 2005 +# Linux kernel version: 2.6.14-git13 +# Thu Nov 10 15:14:13 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set @@ -31,6 +32,7 @@ CONFIG_SYSCTL=y # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set @@ -61,6 +63,23 @@ CONFIG_OBSOLETE_MODPARM=y CONFIG_KMOD=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # System Type # # CONFIG_ARCH_CLPS7500 is not set @@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set @@ -125,7 +145,6 @@ CONFIG_XSCALE_PMU=y CONFIG_ISA_DMA_API=y CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y # CONFIG_PCI_DEBUG is not set # @@ -145,6 +164,8 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ALIGNMENT_TRAP=y # @@ -163,6 +184,7 @@ CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmw # At least one emulation must be selected # CONFIG_FPE_NWFPE=y +CONFIG_FPE_NWFPE_XP=y # CONFIG_FPE_FASTFPE is not set # @@ -206,14 +228,19 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set # +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set @@ -229,6 +256,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -239,6 +270,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -274,6 +306,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -308,7 +341,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set # CONFIG_MTD_ARM_INTEGRATOR is not set CONFIG_MTD_IXP2000=y -# CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PCI is not set # CONFIG_MTD_PLATRAM is not set @@ -335,6 +367,11 @@ CONFIG_MTD_IXP2000=y # CONFIG_MTD_NAND is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -359,21 +396,13 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # @@ -411,12 +440,18 @@ CONFIG_DUMMY=y # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set @@ -456,6 +491,7 @@ CONFIG_EEPRO100=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set @@ -465,6 +501,7 @@ CONFIG_EEPRO100=y # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -610,6 +647,7 @@ CONFIG_IXP2000_WATCHDOG=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -635,7 +673,6 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_ISA is not set CONFIG_I2C_IXP2000=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set @@ -650,7 +687,6 @@ CONFIG_I2C_IXP2000=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set -CONFIG_I2C_SENSOR=y # # Miscellaneous I2C Chip support @@ -663,6 +699,7 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -672,6 +709,7 @@ CONFIG_SENSORS_EEPROM=y # Hardware Monitoring support # CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -702,6 +740,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set @@ -712,6 +751,10 @@ CONFIG_HWMON=y # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -739,6 +782,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -766,10 +813,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -778,6 +821,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -797,11 +841,10 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -817,6 +860,7 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -849,6 +893,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -887,6 +932,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -895,7 +941,9 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y @@ -921,6 +969,7 @@ CONFIG_DEBUG_LL=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y diff --git a/arch/arm/configs/ixdp2401_defconfig b/arch/arm/configs/ixdp2401_defconfig index 32bd552e0986..5572cf95d5f8 100644 --- a/arch/arm/configs/ixdp2401_defconfig +++ b/arch/arm/configs/ixdp2401_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13 -# Wed Sep 14 10:52:10 2005 +# Linux kernel version: 2.6.14-git13 +# Thu Nov 10 15:14:50 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set @@ -31,6 +32,7 @@ CONFIG_SYSCTL=y # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set @@ -61,6 +63,23 @@ CONFIG_OBSOLETE_MODPARM=y CONFIG_KMOD=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # System Type # # CONFIG_ARCH_CLPS7500 is not set @@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set @@ -125,7 +145,6 @@ CONFIG_XSCALE_PMU=y CONFIG_ISA_DMA_API=y CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y # CONFIG_PCI_DEBUG is not set # @@ -145,6 +164,8 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ALIGNMENT_TRAP=y # @@ -163,6 +184,7 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firm # At least one emulation must be selected # CONFIG_FPE_NWFPE=y +CONFIG_FPE_NWFPE_XP=y # CONFIG_FPE_FASTFPE is not set # @@ -206,14 +228,19 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set # +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set @@ -229,6 +256,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -239,6 +270,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -274,6 +306,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -308,7 +341,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set # CONFIG_MTD_ARM_INTEGRATOR is not set CONFIG_MTD_IXP2000=y -# CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PCI is not set # CONFIG_MTD_PLATRAM is not set @@ -335,6 +367,11 @@ CONFIG_MTD_IXP2000=y # CONFIG_MTD_NAND is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -359,21 +396,13 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # @@ -411,12 +440,18 @@ CONFIG_DUMMY=y # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set @@ -457,6 +492,7 @@ CONFIG_EEPRO100=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set @@ -466,6 +502,7 @@ CONFIG_EEPRO100=y # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -611,6 +648,7 @@ CONFIG_IXP2000_WATCHDOG=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -636,7 +674,6 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_ISA is not set CONFIG_I2C_IXP2000=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set @@ -651,7 +688,6 @@ CONFIG_I2C_IXP2000=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set -CONFIG_I2C_SENSOR=y # # Miscellaneous I2C Chip support @@ -664,6 +700,7 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -673,6 +710,7 @@ CONFIG_SENSORS_EEPROM=y # Hardware Monitoring support # CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -703,6 +741,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set @@ -713,6 +752,10 @@ CONFIG_HWMON=y # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -740,6 +783,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -767,10 +814,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -779,6 +822,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -798,11 +842,10 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -818,6 +861,7 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -850,6 +894,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -888,6 +933,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -896,7 +942,9 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y @@ -922,6 +970,7 @@ CONFIG_DEBUG_LL=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y diff --git a/arch/arm/configs/ixdp2800_defconfig b/arch/arm/configs/ixdp2800_defconfig index 81d3a0606f95..0fddbde85835 100644 --- a/arch/arm/configs/ixdp2800_defconfig +++ b/arch/arm/configs/ixdp2800_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13 -# Wed Sep 14 10:52:23 2005 +# Linux kernel version: 2.6.14-git13 +# Thu Nov 10 15:14:56 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set @@ -31,6 +32,7 @@ CONFIG_SYSCTL=y # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set @@ -61,6 +63,23 @@ CONFIG_OBSOLETE_MODPARM=y CONFIG_KMOD=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # System Type # # CONFIG_ARCH_CLPS7500 is not set @@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set @@ -125,7 +145,6 @@ CONFIG_XSCALE_PMU=y CONFIG_ISA_DMA_API=y CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y # CONFIG_PCI_DEBUG is not set # @@ -145,6 +164,8 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ALIGNMENT_TRAP=y # @@ -163,6 +184,7 @@ CONFIG_CMDLINE="console=ttyS0,9600 root=/dev/nfs ip=bootp mem=64M@0x0" # At least one emulation must be selected # CONFIG_FPE_NWFPE=y +CONFIG_FPE_NWFPE_XP=y # CONFIG_FPE_FASTFPE is not set # @@ -206,14 +228,19 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set # +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set @@ -229,6 +256,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -239,6 +270,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -274,6 +306,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -308,7 +341,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set # CONFIG_MTD_ARM_INTEGRATOR is not set CONFIG_MTD_IXP2000=y -# CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PCI is not set # CONFIG_MTD_PLATRAM is not set @@ -335,6 +367,11 @@ CONFIG_MTD_IXP2000=y # CONFIG_MTD_NAND is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -359,21 +396,13 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # @@ -411,12 +440,18 @@ CONFIG_DUMMY=y # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set @@ -456,6 +491,7 @@ CONFIG_EEPRO100=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set @@ -465,6 +501,7 @@ CONFIG_EEPRO100=y # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -610,6 +647,7 @@ CONFIG_IXP2000_WATCHDOG=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -635,7 +673,6 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_ISA is not set CONFIG_I2C_IXP2000=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set @@ -650,7 +687,6 @@ CONFIG_I2C_IXP2000=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set -CONFIG_I2C_SENSOR=y # # Miscellaneous I2C Chip support @@ -663,6 +699,7 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -672,6 +709,7 @@ CONFIG_SENSORS_EEPROM=y # Hardware Monitoring support # CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -702,6 +740,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set @@ -712,6 +751,10 @@ CONFIG_HWMON=y # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -739,6 +782,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -766,10 +813,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -778,6 +821,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -797,11 +841,10 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -817,6 +860,7 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -849,6 +893,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -887,6 +932,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -895,7 +941,9 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y @@ -921,6 +969,7 @@ CONFIG_DEBUG_LL=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y diff --git a/arch/arm/configs/ixdp2801_defconfig b/arch/arm/configs/ixdp2801_defconfig index 66ac0885df3e..89b9aa06aa91 100644 --- a/arch/arm/configs/ixdp2801_defconfig +++ b/arch/arm/configs/ixdp2801_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.13 -# Wed Sep 14 10:52:16 2005 +# Linux kernel version: 2.6.14-git13 +# Thu Nov 10 15:15:03 2005 # CONFIG_ARM=y CONFIG_MMU=y @@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set @@ -31,6 +32,7 @@ CONFIG_SYSCTL=y # CONFIG_HOTPLUG is not set CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" CONFIG_EMBEDDED=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set @@ -61,6 +63,23 @@ CONFIG_OBSOLETE_MODPARM=y CONFIG_KMOD=y # +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# # System Type # # CONFIG_ARCH_CLPS7500 is not set @@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set @@ -125,7 +145,6 @@ CONFIG_XSCALE_PMU=y CONFIG_ISA_DMA_API=y CONFIG_PCI=y CONFIG_PCI_LEGACY_PROC=y -CONFIG_PCI_NAMES=y # CONFIG_PCI_DEBUG is not set # @@ -145,6 +164,8 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ALIGNMENT_TRAP=y # @@ -163,6 +184,7 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firm # At least one emulation must be selected # CONFIG_FPE_NWFPE=y +CONFIG_FPE_NWFPE_XP=y # CONFIG_FPE_FASTFPE is not set # @@ -206,14 +228,19 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_NETFILTER is not set # +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set @@ -229,6 +256,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -239,6 +270,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -274,6 +306,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set # # RAM/ROM/Flash chip drivers @@ -308,7 +341,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set # CONFIG_MTD_ARM_INTEGRATOR is not set CONFIG_MTD_IXP2000=y -# CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_PCI is not set # CONFIG_MTD_PLATRAM is not set @@ -335,6 +367,11 @@ CONFIG_MTD_IXP2000=y # CONFIG_MTD_NAND is not set # +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# # Parallel port support # # CONFIG_PARPORT is not set @@ -359,21 +396,13 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # @@ -411,12 +440,18 @@ CONFIG_DUMMY=y # CONFIG_ARCNET is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set @@ -457,6 +492,7 @@ CONFIG_EEPRO100=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set +# CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set @@ -466,6 +502,7 @@ CONFIG_EEPRO100=y # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -611,6 +648,7 @@ CONFIG_IXP2000_WATCHDOG=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -636,7 +674,6 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_ISA is not set CONFIG_I2C_IXP2000=y # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT_LIGHT is not set @@ -651,7 +688,6 @@ CONFIG_I2C_IXP2000=y # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set -CONFIG_I2C_SENSOR=y # # Miscellaneous I2C Chip support @@ -664,6 +700,7 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -673,6 +710,7 @@ CONFIG_SENSORS_EEPROM=y # Hardware Monitoring support # CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -703,6 +741,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set @@ -713,6 +752,10 @@ CONFIG_HWMON=y # # +# Multimedia Capabilities Port drivers +# + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -740,6 +783,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -767,10 +814,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y - -# -# XFS support -# # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -779,6 +822,7 @@ CONFIG_INOTIFY=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -798,11 +842,10 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set # # Miscellaneous filesystems @@ -818,6 +861,7 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y @@ -850,6 +894,7 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types @@ -888,6 +933,7 @@ CONFIG_MSDOS_PARTITION=y CONFIG_DEBUG_KERNEL=y CONFIG_MAGIC_SYSRQ=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -896,7 +942,9 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set CONFIG_FRAME_POINTER=y +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_WAITQ is not set CONFIG_DEBUG_ERRORS=y @@ -922,6 +970,7 @@ CONFIG_DEBUG_LL=y # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y diff --git a/arch/arm/lib/csumpartial.S b/arch/arm/lib/csumpartial.S index fe797cf320bb..a78dae5a7b28 100644 --- a/arch/arm/lib/csumpartial.S +++ b/arch/arm/lib/csumpartial.S @@ -26,7 +26,7 @@ td1 .req r4 @ save before use td2 .req r5 @ save before use td3 .req lr -.zero: mov r0, sum +.Lzero: mov r0, sum add sp, sp, #4 ldr pc, [sp], #4 @@ -34,8 +34,8 @@ td3 .req lr * Handle 0 to 7 bytes, with any alignment of source and * destination pointers. Note that when we get here, C = 0 */ -.less8: teq len, #0 @ check for zero count - beq .zero +.Lless8: teq len, #0 @ check for zero count + beq .Lzero /* we must have at least one byte. */ tst buf, #1 @ odd address? @@ -44,12 +44,12 @@ td3 .req lr subne len, len, #1 adcnes sum, sum, td0, put_byte_1 -.less4: tst len, #6 - beq .less8_byte +.Lless4: tst len, #6 + beq .Lless8_byte /* we are now half-word aligned */ -.less8_wordlp: +.Lless8_wordlp: #if __LINUX_ARM_ARCH__ >= 4 ldrh td0, [buf], #2 sub len, len, #2 @@ -65,19 +65,19 @@ td3 .req lr #endif adcs sum, sum, td0 tst len, #6 - bne .less8_wordlp + bne .Lless8_wordlp -.less8_byte: tst len, #1 @ odd number of bytes +.Lless8_byte: tst len, #1 @ odd number of bytes ldrneb td0, [buf], #1 @ include last byte adcnes sum, sum, td0, put_byte_0 @ update checksum -.done: adc r0, sum, #0 @ collect up the last carry +.Ldone: adc r0, sum, #0 @ collect up the last carry ldr td0, [sp], #4 tst td0, #1 @ check buffer alignment movne r0, r0, ror #8 @ rotate checksum by 8 bits ldr pc, [sp], #4 @ return -.not_aligned: tst buf, #1 @ odd address +.Lnot_aligned: tst buf, #1 @ odd address ldrneb td0, [buf], #1 @ make even subne len, len, #1 adcnes sum, sum, td0, put_byte_1 @ update checksum @@ -102,14 +102,14 @@ td3 .req lr ENTRY(csum_partial) stmfd sp!, {buf, lr} cmp len, #8 @ Ensure that we have at least - blo .less8 @ 8 bytes to copy. + blo .Lless8 @ 8 bytes to copy. tst buf, #1 movne sum, sum, ror #8 adds sum, sum, #0 @ C = 0 tst buf, #3 @ Test destination alignment - blne .not_aligned @ aligh destination, return here + blne .Lnot_aligned @ align destination, return here 1: bics ip, len, #31 beq 3f @@ -131,11 +131,11 @@ ENTRY(csum_partial) ldmfd sp!, {r4 - r5} 3: tst len, #0x1c @ should not change C - beq .less4 + beq .Lless4 4: ldr td0, [buf], #4 sub len, len, #4 adcs sum, sum, td0 tst len, #0x1c bne 4b - b .less4 + b .Lless4 diff --git a/arch/arm/lib/csumpartialcopygeneric.S b/arch/arm/lib/csumpartialcopygeneric.S index d3a2f4667db4..4a4609c19095 100644 --- a/arch/arm/lib/csumpartialcopygeneric.S +++ b/arch/arm/lib/csumpartialcopygeneric.S @@ -22,7 +22,7 @@ dst .req r1 len .req r2 sum .req r3 -.zero: mov r0, sum +.Lzero: mov r0, sum load_regs ea /* @@ -31,8 +31,9 @@ sum .req r3 * the length. Note that the source pointer hasn't been * aligned yet. */ -.dst_unaligned: tst dst, #1 - beq .dst_16bit +.Ldst_unaligned: + tst dst, #1 + beq .Ldst_16bit load1b ip sub len, len, #1 @@ -41,7 +42,7 @@ sum .req r3 tst dst, #2 moveq pc, lr @ dst is now 32bit aligned -.dst_16bit: load2b r8, ip +.Ldst_16bit: load2b r8, ip sub len, len, #2 adcs sum, sum, r8, put_byte_0 strb r8, [dst], #1 @@ -53,12 +54,12 @@ sum .req r3 * Handle 0 to 7 bytes, with any alignment of source and * destination pointers. Note that when we get here, C = 0 */ -.less8: teq len, #0 @ check for zero count - beq .zero +.Lless8: teq len, #0 @ check for zero count + beq .Lzero /* we must have at least one byte. */ tst dst, #1 @ dst 16-bit aligned - beq .less8_aligned + beq .Lless8_aligned /* Align dst */ load1b ip @@ -66,7 +67,7 @@ sum .req r3 adcs sum, sum, ip, put_byte_1 @ update checksum strb ip, [dst], #1 tst len, #6 - beq .less8_byteonly + beq .Lless8_byteonly 1: load2b r8, ip sub len, len, #2 @@ -74,15 +75,16 @@ sum .req r3 strb r8, [dst], #1 adcs sum, sum, ip, put_byte_1 strb ip, [dst], #1 -.less8_aligned: tst len, #6 +.Lless8_aligned: + tst len, #6 bne 1b -.less8_byteonly: +.Lless8_byteonly: tst len, #1 - beq .done + beq .Ldone load1b r8 adcs sum, sum, r8, put_byte_0 @ update checksum strb r8, [dst], #1 - b .done + b .Ldone FN_ENTRY mov ip, sp @@ -90,11 +92,11 @@ FN_ENTRY sub fp, ip, #4 cmp len, #8 @ Ensure that we have at least - blo .less8 @ 8 bytes to copy. + blo .Lless8 @ 8 bytes to copy. adds sum, sum, #0 @ C = 0 tst dst, #3 @ Test destination alignment - blne .dst_unaligned @ align destination, return here + blne .Ldst_unaligned @ align destination, return here /* * Ok, the dst pointer is now 32bit aligned, and we know @@ -103,7 +105,7 @@ FN_ENTRY */ tst src, #3 @ Test source alignment - bne .src_not_aligned + bne .Lsrc_not_aligned /* Routine for src & dst aligned */ @@ -136,17 +138,17 @@ FN_ENTRY adcs sum, sum, r4 4: ands len, len, #3 - beq .done + beq .Ldone load1l r4 tst len, #2 mov r5, r4, get_byte_0 - beq .exit + beq .Lexit adcs sum, sum, r4, push #16 strb r5, [dst], #1 mov r5, r4, get_byte_1 strb r5, [dst], #1 mov r5, r4, get_byte_2 -.exit: tst len, #1 +.Lexit: tst len, #1 strneb r5, [dst], #1 andne r5, r5, #255 adcnes sum, sum, r5, put_byte_0 @@ -157,20 +159,20 @@ FN_ENTRY * the inefficient byte manipulations in the * architecture independent code. */ -.done: adc r0, sum, #0 +.Ldone: adc r0, sum, #0 ldr sum, [sp, #0] @ dst tst sum, #1 movne r0, r0, ror #8 load_regs ea -.src_not_aligned: +.Lsrc_not_aligned: adc sum, sum, #0 @ include C from dst alignment and ip, src, #3 bic src, src, #3 load1l r5 cmp ip, #2 - beq .src2_aligned - bhi .src3_aligned + beq .Lsrc2_aligned + bhi .Lsrc3_aligned mov r4, r5, pull #8 @ C = 0 bics ip, len, #15 beq 2f @@ -211,18 +213,18 @@ FN_ENTRY adcs sum, sum, r4 mov r4, r5, pull #8 4: ands len, len, #3 - beq .done + beq .Ldone mov r5, r4, get_byte_0 tst len, #2 - beq .exit + beq .Lexit adcs sum, sum, r4, push #16 strb r5, [dst], #1 mov r5, r4, get_byte_1 strb r5, [dst], #1 mov r5, r4, get_byte_2 - b .exit + b .Lexit -.src2_aligned: mov r4, r5, pull #16 +.Lsrc2_aligned: mov r4, r5, pull #16 adds sum, sum, #0 bics ip, len, #15 beq 2f @@ -263,20 +265,20 @@ FN_ENTRY adcs sum, sum, r4 mov r4, r5, pull #16 4: ands len, len, #3 - beq .done + beq .Ldone mov r5, r4, get_byte_0 tst len, #2 - beq .exit + beq .Lexit adcs sum, sum, r4 strb r5, [dst], #1 mov r5, r4, get_byte_1 strb r5, [dst], #1 tst len, #1 - beq .done + beq .Ldone load1b r5 - b .exit + b .Lexit -.src3_aligned: mov r4, r5, pull #24 +.Lsrc3_aligned: mov r4, r5, pull #24 adds sum, sum, #0 bics ip, len, #15 beq 2f @@ -317,10 +319,10 @@ FN_ENTRY adcs sum, sum, r4 mov r4, r5, pull #24 4: ands len, len, #3 - beq .done + beq .Ldone mov r5, r4, get_byte_0 tst len, #2 - beq .exit + beq .Lexit strb r5, [dst], #1 adcs sum, sum, r4 load1l r4 @@ -328,4 +330,4 @@ FN_ENTRY strb r5, [dst], #1 adcs sum, sum, r4, push #24 mov r5, r4, get_byte_1 - b .exit + b .Lexit diff --git a/arch/arm/lib/delay.S b/arch/arm/lib/delay.S index 3c7f7e675dd8..b3fb475b4120 100644 --- a/arch/arm/lib/delay.S +++ b/arch/arm/lib/delay.S @@ -11,7 +11,7 @@ #include <asm/assembler.h> .text -LC0: .word loops_per_jiffy +.LC0: .word loops_per_jiffy /* * 0 <= r0 <= 2000 @@ -21,7 +21,7 @@ ENTRY(__udelay) orr r2, r2, #0x00db mul r0, r2, r0 ENTRY(__const_udelay) @ 0 <= r0 <= 0x01ffffff - ldr r2, LC0 + ldr r2, .LC0 ldr r2, [r2] @ max = 0x0fffffff mov r0, r0, lsr #11 @ max = 0x00003fff mov r2, r2, lsr #11 @ max = 0x0003ffff diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S index f055d56ea68a..6f8e27a58c78 100644 --- a/arch/arm/lib/findbit.S +++ b/arch/arm/lib/findbit.S @@ -27,7 +27,7 @@ ENTRY(_find_first_zero_bit_le) mov r2, #0 1: ldrb r3, [r0, r2, lsr #3] eors r3, r3, #0xff @ invert bits - bne .found @ any now set - found zero bit + bne .L_found @ any now set - found zero bit add r2, r2, #8 @ next bit pointer 2: cmp r2, r1 @ any more? blo 1b @@ -46,7 +46,7 @@ ENTRY(_find_next_zero_bit_le) ldrb r3, [r0, r2, lsr #3] eor r3, r3, #0xff @ now looking for a 1 bit movs r3, r3, lsr ip @ shift off unused bits - bne .found + bne .L_found orr r2, r2, #7 @ if zero, then no bits here add r2, r2, #1 @ align bit pointer b 2b @ loop for next bit @@ -61,7 +61,7 @@ ENTRY(_find_first_bit_le) mov r2, #0 1: ldrb r3, [r0, r2, lsr #3] movs r3, r3 - bne .found @ any now set - found zero bit + bne .L_found @ any now set - found zero bit add r2, r2, #8 @ next bit pointer 2: cmp r2, r1 @ any more? blo 1b @@ -79,7 +79,7 @@ ENTRY(_find_next_bit_le) beq 1b @ If new byte, goto old routine ldrb r3, [r0, r2, lsr #3] movs r3, r3, lsr ip @ shift off unused bits - bne .found + bne .L_found orr r2, r2, #7 @ if zero, then no bits here add r2, r2, #1 @ align bit pointer b 2b @ loop for next bit @@ -93,7 +93,7 @@ ENTRY(_find_first_zero_bit_be) 1: eor r3, r2, #0x18 @ big endian byte ordering ldrb r3, [r0, r3, lsr #3] eors r3, r3, #0xff @ invert bits - bne .found @ any now set - found zero bit + bne .L_found @ any now set - found zero bit add r2, r2, #8 @ next bit pointer 2: cmp r2, r1 @ any more? blo 1b @@ -109,7 +109,7 @@ ENTRY(_find_next_zero_bit_be) ldrb r3, [r0, r3, lsr #3] eor r3, r3, #0xff @ now looking for a 1 bit movs r3, r3, lsr ip @ shift off unused bits - bne .found + bne .L_found orr r2, r2, #7 @ if zero, then no bits here add r2, r2, #1 @ align bit pointer b 2b @ loop for next bit @@ -121,7 +121,7 @@ ENTRY(_find_first_bit_be) 1: eor r3, r2, #0x18 @ big endian byte ordering ldrb r3, [r0, r3, lsr #3] movs r3, r3 - bne .found @ any now set - found zero bit + bne .L_found @ any now set - found zero bit add r2, r2, #8 @ next bit pointer 2: cmp r2, r1 @ any more? blo 1b @@ -136,7 +136,7 @@ ENTRY(_find_next_bit_be) eor r3, r2, #0x18 @ big endian byte ordering ldrb r3, [r0, r3, lsr #3] movs r3, r3, lsr ip @ shift off unused bits - bne .found + bne .L_found orr r2, r2, #7 @ if zero, then no bits here add r2, r2, #1 @ align bit pointer b 2b @ loop for next bit @@ -146,7 +146,7 @@ ENTRY(_find_next_bit_be) /* * One or more bits in the LSB of r3 are assumed to be set. */ -.found: +.L_found: #if __LINUX_ARM_ARCH__ >= 5 rsb r1, r3, #0 and r3, r3, r1 diff --git a/arch/arm/lib/io-acorn.S b/arch/arm/lib/io-acorn.S index 3aacd01d40e1..b153523631c3 100644 --- a/arch/arm/lib/io-acorn.S +++ b/arch/arm/lib/io-acorn.S @@ -17,7 +17,7 @@ .text .align -.iosl_warning: +.Liosl_warning: .ascii "<4>insl/outsl not implemented, called from %08lX\0" .align @@ -27,6 +27,6 @@ */ ENTRY(insl) ENTRY(outsl) - adr r0, .iosl_warning + adr r0, .Liosl_warning mov r1, lr b printk diff --git a/arch/arm/lib/io-readsb.S b/arch/arm/lib/io-readsb.S index 081ef749298a..d3d8de71a2c8 100644 --- a/arch/arm/lib/io-readsb.S +++ b/arch/arm/lib/io-readsb.S @@ -10,7 +10,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> -.insb_align: rsb ip, ip, #4 +.Linsb_align: rsb ip, ip, #4 cmp ip, r2 movgt ip, r2 cmp ip, #2 @@ -21,20 +21,20 @@ ldrgtb r3, [r0] strgtb r3, [r1], #1 subs r2, r2, ip - bne .insb_aligned + bne .Linsb_aligned ENTRY(__raw_readsb) teq r2, #0 @ do we have to check for the zero len? moveq pc, lr ands ip, r1, #3 - bne .insb_align + bne .Linsb_align -.insb_aligned: stmfd sp!, {r4 - r6, lr} +.Linsb_aligned: stmfd sp!, {r4 - r6, lr} subs r2, r2, #16 - bmi .insb_no_16 + bmi .Linsb_no_16 -.insb_16_lp: ldrb r3, [r0] +.Linsb_16_lp: ldrb r3, [r0] ldrb r4, [r0] ldrb r5, [r0] mov r3, r3, put_byte_0 @@ -69,13 +69,13 @@ ENTRY(__raw_readsb) stmia r1!, {r3 - r6} subs r2, r2, #16 - bpl .insb_16_lp + bpl .Linsb_16_lp tst r2, #15 LOADREGS(eqfd, sp!, {r4 - r6, pc}) -.insb_no_16: tst r2, #8 - beq .insb_no_8 +.Linsb_no_16: tst r2, #8 + beq .Linsb_no_8 ldrb r3, [r0] ldrb r4, [r0] @@ -95,8 +95,8 @@ ENTRY(__raw_readsb) orr r4, r4, ip, put_byte_3 stmia r1!, {r3, r4} -.insb_no_8: tst r2, #4 - beq .insb_no_4 +.Linsb_no_8: tst r2, #4 + beq .Linsb_no_4 ldrb r3, [r0] ldrb r4, [r0] @@ -108,7 +108,7 @@ ENTRY(__raw_readsb) orr r3, r3, r6, put_byte_3 str r3, [r1], #4 -.insb_no_4: ands r2, r2, #3 +.Linsb_no_4: ands r2, r2, #3 LOADREGS(eqfd, sp!, {r4 - r6, pc}) cmp r2, #2 diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S index 476cf7f8a633..146d47c15455 100644 --- a/arch/arm/lib/io-readsw-armv3.S +++ b/arch/arm/lib/io-readsw-armv3.S @@ -11,16 +11,16 @@ #include <asm/assembler.h> #include <asm/hardware.h> -.insw_bad_alignment: - adr r0, .insw_bad_align_msg +.Linsw_bad_alignment: + adr r0, .Linsw_bad_align_msg mov r2, lr b panic -.insw_bad_align_msg: +.Linsw_bad_align_msg: .asciz "insw: bad buffer alignment (0x%p, lr=0x%08lX)\n" .align -.insw_align: tst r1, #1 - bne .insw_bad_alignment +.Linsw_align: tst r1, #1 + bne .Linsw_bad_alignment ldr r3, [r0] strb r3, [r1], #1 @@ -34,16 +34,16 @@ ENTRY(__raw_readsw) teq r2, #0 @ do we have to check for the zero len? moveq pc, lr tst r1, #3 - bne .insw_align + bne .Linsw_align -.insw_aligned: mov ip, #0xff +.Linsw_aligned: mov ip, #0xff orr ip, ip, ip, lsl #8 stmfd sp!, {r4, r5, r6, lr} subs r2, r2, #8 - bmi .no_insw_8 + bmi .Lno_insw_8 -.insw_8_lp: ldr r3, [r0] +.Linsw_8_lp: ldr r3, [r0] and r3, r3, ip ldr r4, [r0] orr r3, r3, r4, lsl #16 @@ -66,13 +66,13 @@ ENTRY(__raw_readsw) stmia r1!, {r3 - r6} subs r2, r2, #8 - bpl .insw_8_lp + bpl .Linsw_8_lp tst r2, #7 LOADREGS(eqfd, sp!, {r4, r5, r6, pc}) -.no_insw_8: tst r2, #4 - beq .no_insw_4 +.Lno_insw_8: tst r2, #4 + beq .Lno_insw_4 ldr r3, [r0] and r3, r3, ip @@ -86,8 +86,8 @@ ENTRY(__raw_readsw) stmia r1!, {r3, r4} -.no_insw_4: tst r2, #2 - beq .no_insw_2 +.Lno_insw_4: tst r2, #2 + beq .Lno_insw_2 ldr r3, [r0] and r3, r3, ip @@ -96,7 +96,7 @@ ENTRY(__raw_readsw) str r3, [r1], #4 -.no_insw_2: tst r2, #1 +.Lno_insw_2: tst r2, #1 ldrne r3, [r0] strneb r3, [r1], #1 movne r3, r3, lsr #8 diff --git a/arch/arm/lib/io-readsw-armv4.S b/arch/arm/lib/io-readsw-armv4.S index c92b66ecbe86..4db1c5f0b219 100644 --- a/arch/arm/lib/io-readsw-armv4.S +++ b/arch/arm/lib/io-readsw-armv4.S @@ -18,8 +18,8 @@ #endif .endm -.insw_align: movs ip, r1, lsl #31 - bne .insw_noalign +.Linsw_align: movs ip, r1, lsl #31 + bne .Linsw_noalign ldrh ip, [r0] sub r2, r2, #1 strh ip, [r1], #2 @@ -28,14 +28,14 @@ ENTRY(__raw_readsw) teq r2, #0 moveq pc, lr tst r1, #3 - bne .insw_align + bne .Linsw_align stmfd sp!, {r4, r5, lr} subs r2, r2, #8 - bmi .no_insw_8 + bmi .Lno_insw_8 -.insw_8_lp: ldrh r3, [r0] +.Linsw_8_lp: ldrh r3, [r0] ldrh r4, [r0] pack r3, r3, r4 @@ -53,10 +53,10 @@ ENTRY(__raw_readsw) subs r2, r2, #8 stmia r1!, {r3 - r5, ip} - bpl .insw_8_lp + bpl .Linsw_8_lp -.no_insw_8: tst r2, #4 - beq .no_insw_4 +.Lno_insw_8: tst r2, #4 + beq .Lno_insw_4 ldrh r3, [r0] ldrh r4, [r0] @@ -68,15 +68,15 @@ ENTRY(__raw_readsw) stmia r1!, {r3, r4} -.no_insw_4: movs r2, r2, lsl #31 - bcc .no_insw_2 +.Lno_insw_4: movs r2, r2, lsl #31 + bcc .Lno_insw_2 ldrh r3, [r0] ldrh ip, [r0] pack r3, r3, ip str r3, [r1], #4 -.no_insw_2: ldrneh r3, [r0] +.Lno_insw_2: ldrneh r3, [r0] strneh r3, [r1] ldmfd sp!, {r4, r5, pc} @@ -93,7 +93,7 @@ ENTRY(__raw_readsw) #define pull_hbyte1 lsr #8 #endif -.insw_noalign: stmfd sp!, {r4, lr} +.Linsw_noalign: stmfd sp!, {r4, lr} ldrccb ip, [r1, #-1]! bcc 1f diff --git a/arch/arm/lib/io-writesb.S b/arch/arm/lib/io-writesb.S index 70b2561bdb09..08209fc640ea 100644 --- a/arch/arm/lib/io-writesb.S +++ b/arch/arm/lib/io-writesb.S @@ -30,7 +30,7 @@ #endif .endm -.outsb_align: rsb ip, ip, #4 +.Loutsb_align: rsb ip, ip, #4 cmp ip, r2 movgt ip, r2 cmp ip, #2 @@ -41,44 +41,45 @@ ldrgtb r3, [r1], #1 strgtb r3, [r0] subs r2, r2, ip - bne .outsb_aligned + bne .Loutsb_aligned ENTRY(__raw_writesb) teq r2, #0 @ do we have to check for the zero len? moveq pc, lr ands ip, r1, #3 - bne .outsb_align + bne .Loutsb_align -.outsb_aligned: stmfd sp!, {r4, r5, lr} +.Loutsb_aligned: + stmfd sp!, {r4, r5, lr} subs r2, r2, #16 - bmi .outsb_no_16 + bmi .Loutsb_no_16 -.outsb_16_lp: ldmia r1!, {r3, r4, r5, ip} +.Loutsb_16_lp: ldmia r1!, {r3, r4, r5, ip} outword r3 outword r4 outword r5 outword ip subs r2, r2, #16 - bpl .outsb_16_lp + bpl .Loutsb_16_lp tst r2, #15 LOADREGS(eqfd, sp!, {r4, r5, pc}) -.outsb_no_16: tst r2, #8 - beq .outsb_no_8 +.Loutsb_no_16: tst r2, #8 + beq .Loutsb_no_8 ldmia r1!, {r3, r4} outword r3 outword r4 -.outsb_no_8: tst r2, #4 - beq .outsb_no_4 +.Loutsb_no_8: tst r2, #4 + beq .Loutsb_no_4 ldr r3, [r1], #4 outword r3 -.outsb_no_4: ands r2, r2, #3 +.Loutsb_no_4: ands r2, r2, #3 LOADREGS(eqfd, sp!, {r4, r5, pc}) cmp r2, #2 diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S index 950e7e310f1a..52d62b481295 100644 --- a/arch/arm/lib/io-writesw-armv3.S +++ b/arch/arm/lib/io-writesw-armv3.S @@ -11,16 +11,16 @@ #include <asm/assembler.h> #include <asm/hardware.h> -.outsw_bad_alignment: - adr r0, .outsw_bad_align_msg +.Loutsw_bad_alignment: + adr r0, .Loutsw_bad_align_msg mov r2, lr b panic -.outsw_bad_align_msg: +.Loutsw_bad_align_msg: .asciz "outsw: bad buffer alignment (0x%p, lr=0x%08lX)\n" .align -.outsw_align: tst r1, #1 - bne .outsw_bad_alignment +.Loutsw_align: tst r1, #1 + bne .Loutsw_bad_alignment add r1, r1, #2 @@ -35,14 +35,14 @@ ENTRY(__raw_writesw) teq r2, #0 @ do we have to check for the zero len? moveq pc, lr tst r1, #3 - bne .outsw_align + bne .Loutsw_align -.outsw_aligned: stmfd sp!, {r4, r5, r6, lr} + stmfd sp!, {r4, r5, r6, lr} subs r2, r2, #8 - bmi .no_outsw_8 + bmi .Lno_outsw_8 -.outsw_8_lp: ldmia r1!, {r3, r4, r5, r6} +.Loutsw_8_lp: ldmia r1!, {r3, r4, r5, r6} mov ip, r3, lsl #16 orr ip, ip, ip, lsr #16 @@ -77,13 +77,13 @@ ENTRY(__raw_writesw) str ip, [r0] subs r2, r2, #8 - bpl .outsw_8_lp + bpl .Loutsw_8_lp tst r2, #7 LOADREGS(eqfd, sp!, {r4, r5, r6, pc}) -.no_outsw_8: tst r2, #4 - beq .no_outsw_4 +.Lno_outsw_8: tst r2, #4 + beq .Lno_outsw_4 ldmia r1!, {r3, r4} @@ -103,8 +103,8 @@ ENTRY(__raw_writesw) orr ip, ip, ip, lsl #16 str ip, [r0] -.no_outsw_4: tst r2, #2 - beq .no_outsw_2 +.Lno_outsw_4: tst r2, #2 + beq .Lno_outsw_2 ldr r3, [r1], #4 @@ -116,7 +116,7 @@ ENTRY(__raw_writesw) orr ip, ip, ip, lsl #16 str ip, [r0] -.no_outsw_2: tst r2, #1 +.Lno_outsw_2: tst r2, #1 ldrne r3, [r1] diff --git a/arch/arm/lib/io-writesw-armv4.S b/arch/arm/lib/io-writesw-armv4.S index 5e240e452af6..c8e85bd653b7 100644 --- a/arch/arm/lib/io-writesw-armv4.S +++ b/arch/arm/lib/io-writesw-armv4.S @@ -22,8 +22,8 @@ #endif .endm -.outsw_align: movs ip, r1, lsl #31 - bne .outsw_noalign +.Loutsw_align: movs ip, r1, lsl #31 + bne .Loutsw_noalign ldrh r3, [r1], #2 sub r2, r2, #1 @@ -33,35 +33,35 @@ ENTRY(__raw_writesw) teq r2, #0 moveq pc, lr ands r3, r1, #3 - bne .outsw_align + bne .Loutsw_align stmfd sp!, {r4, r5, lr} subs r2, r2, #8 - bmi .no_outsw_8 + bmi .Lno_outsw_8 -.outsw_8_lp: ldmia r1!, {r3, r4, r5, ip} +.Loutsw_8_lp: ldmia r1!, {r3, r4, r5, ip} subs r2, r2, #8 outword r3 outword r4 outword r5 outword ip - bpl .outsw_8_lp + bpl .Loutsw_8_lp -.no_outsw_8: tst r2, #4 - beq .no_outsw_4 +.Lno_outsw_8: tst r2, #4 + beq .Lno_outsw_4 ldmia r1!, {r3, ip} outword r3 outword ip -.no_outsw_4: movs r2, r2, lsl #31 - bcc .no_outsw_2 +.Lno_outsw_4: movs r2, r2, lsl #31 + bcc .Lno_outsw_2 ldr r3, [r1], #4 outword r3 -.no_outsw_2: ldrneh r3, [r1] +.Lno_outsw_2: ldrneh r3, [r1] strneh r3, [r0] ldmfd sp!, {r4, r5, pc} @@ -74,7 +74,8 @@ ENTRY(__raw_writesw) #define push_hbyte1 lsl #8 #endif -.outsw_noalign: ldr r3, [r1, -r3]! +.Loutsw_noalign: + ldr r3, [r1, -r3]! subcs r2, r2, #1 bcs 2f subs r2, r2, #2 diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S index 6f1b5b49fe4c..0cc450f863b6 100644 --- a/arch/arm/lib/uaccess.S +++ b/arch/arm/lib/uaccess.S @@ -27,7 +27,7 @@ * Returns : Number of bytes NOT copied. */ -.c2u_dest_not_aligned: +.Lc2u_dest_not_aligned: rsb ip, ip, #4 cmp ip, #2 ldrb r3, [r1], #1 @@ -37,32 +37,32 @@ USER( strgebt r3, [r0], #1) @ May fault ldrgtb r3, [r1], #1 USER( strgtbt r3, [r0], #1) @ May fault sub r2, r2, ip - b .c2u_dest_aligned + b .Lc2u_dest_aligned ENTRY(__arch_copy_to_user) stmfd sp!, {r2, r4 - r7, lr} cmp r2, #4 - blt .c2u_not_enough + blt .Lc2u_not_enough ands ip, r0, #3 - bne .c2u_dest_not_aligned -.c2u_dest_aligned: + bne .Lc2u_dest_not_aligned +.Lc2u_dest_aligned: ands ip, r1, #3 - bne .c2u_src_not_aligned + bne .Lc2u_src_not_aligned /* * Seeing as there has to be at least 8 bytes to copy, we can * copy one word, and force a user-mode page fault... */ -.c2u_0fupi: subs r2, r2, #4 +.Lc2u_0fupi: subs r2, r2, #4 addmi ip, r2, #4 - bmi .c2u_0nowords + bmi .Lc2u_0nowords ldr r3, [r1], #4 USER( strt r3, [r0], #4) @ May fault mov ip, r0, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction rsb ip, ip, #0 movs ip, ip, lsr #32 - PAGE_SHIFT - beq .c2u_0fupi + beq .Lc2u_0fupi /* * ip = max no. of bytes to copy before needing another "strt" insn */ @@ -70,16 +70,16 @@ USER( strt r3, [r0], #4) @ May fault movlt ip, r2 sub r2, r2, ip subs ip, ip, #32 - blt .c2u_0rem8lp + blt .Lc2u_0rem8lp -.c2u_0cpy8lp: ldmia r1!, {r3 - r6} +.Lc2u_0cpy8lp: ldmia r1!, {r3 - r6} stmia r0!, {r3 - r6} @ Shouldnt fault ldmia r1!, {r3 - r6} subs ip, ip, #32 stmia r0!, {r3 - r6} @ Shouldnt fault - bpl .c2u_0cpy8lp + bpl .Lc2u_0cpy8lp -.c2u_0rem8lp: cmn ip, #16 +.Lc2u_0rem8lp: cmn ip, #16 ldmgeia r1!, {r3 - r6} stmgeia r0!, {r3 - r6} @ Shouldnt fault tst ip, #8 @@ -89,33 +89,33 @@ USER( strt r3, [r0], #4) @ May fault ldrne r3, [r1], #4 strnet r3, [r0], #4 @ Shouldnt fault ands ip, ip, #3 - beq .c2u_0fupi -.c2u_0nowords: teq ip, #0 - beq .c2u_finished -.c2u_nowords: cmp ip, #2 + beq .Lc2u_0fupi +.Lc2u_0nowords: teq ip, #0 + beq .Lc2u_finished +.Lc2u_nowords: cmp ip, #2 ldrb r3, [r1], #1 USER( strbt r3, [r0], #1) @ May fault ldrgeb r3, [r1], #1 USER( strgebt r3, [r0], #1) @ May fault ldrgtb r3, [r1], #1 USER( strgtbt r3, [r0], #1) @ May fault - b .c2u_finished + b .Lc2u_finished -.c2u_not_enough: +.Lc2u_not_enough: movs ip, r2 - bne .c2u_nowords -.c2u_finished: mov r0, #0 + bne .Lc2u_nowords +.Lc2u_finished: mov r0, #0 LOADREGS(fd,sp!,{r2, r4 - r7, pc}) -.c2u_src_not_aligned: +.Lc2u_src_not_aligned: bic r1, r1, #3 ldr r7, [r1], #4 cmp ip, #2 - bgt .c2u_3fupi - beq .c2u_2fupi -.c2u_1fupi: subs r2, r2, #4 + bgt .Lc2u_3fupi + beq .Lc2u_2fupi +.Lc2u_1fupi: subs r2, r2, #4 addmi ip, r2, #4 - bmi .c2u_1nowords + bmi .Lc2u_1nowords mov r3, r7, pull #8 ldr r7, [r1], #4 orr r3, r3, r7, push #24 @@ -123,14 +123,14 @@ USER( strt r3, [r0], #4) @ May fault mov ip, r0, lsl #32 - PAGE_SHIFT rsb ip, ip, #0 movs ip, ip, lsr #32 - PAGE_SHIFT - beq .c2u_1fupi + beq .Lc2u_1fupi cmp r2, ip movlt ip, r2 sub r2, r2, ip subs ip, ip, #16 - blt .c2u_1rem8lp + blt .Lc2u_1rem8lp -.c2u_1cpy8lp: mov r3, r7, pull #8 +.Lc2u_1cpy8lp: mov r3, r7, pull #8 ldmia r1!, {r4 - r7} subs ip, ip, #16 orr r3, r3, r4, push #24 @@ -141,9 +141,9 @@ USER( strt r3, [r0], #4) @ May fault mov r6, r6, pull #8 orr r6, r6, r7, push #24 stmia r0!, {r3 - r6} @ Shouldnt fault - bpl .c2u_1cpy8lp + bpl .Lc2u_1cpy8lp -.c2u_1rem8lp: tst ip, #8 +.Lc2u_1rem8lp: tst ip, #8 movne r3, r7, pull #8 ldmneia r1!, {r4, r7} orrne r3, r3, r4, push #24 @@ -156,21 +156,21 @@ USER( strt r3, [r0], #4) @ May fault orrne r3, r3, r7, push #24 strnet r3, [r0], #4 @ Shouldnt fault ands ip, ip, #3 - beq .c2u_1fupi -.c2u_1nowords: mov r3, r7, get_byte_1 + beq .Lc2u_1fupi +.Lc2u_1nowords: mov r3, r7, get_byte_1 teq ip, #0 - beq .c2u_finished + beq .Lc2u_finished cmp ip, #2 USER( strbt r3, [r0], #1) @ May fault movge r3, r7, get_byte_2 USER( strgebt r3, [r0], #1) @ May fault movgt r3, r7, get_byte_3 USER( strgtbt r3, [r0], #1) @ May fault - b .c2u_finished + b .Lc2u_finished -.c2u_2fupi: subs r2, r2, #4 +.Lc2u_2fupi: subs r2, r2, #4 addmi ip, r2, #4 - bmi .c2u_2nowords + bmi .Lc2u_2nowords mov r3, r7, pull #16 ldr r7, [r1], #4 orr r3, r3, r7, push #16 @@ -178,14 +178,14 @@ USER( strt r3, [r0], #4) @ May fault mov ip, r0, lsl #32 - PAGE_SHIFT rsb ip, ip, #0 movs ip, ip, lsr #32 - PAGE_SHIFT - beq .c2u_2fupi + beq .Lc2u_2fupi cmp r2, ip movlt ip, r2 sub r2, r2, ip subs ip, ip, #16 - blt .c2u_2rem8lp + blt .Lc2u_2rem8lp -.c2u_2cpy8lp: mov r3, r7, pull #16 +.Lc2u_2cpy8lp: mov r3, r7, pull #16 ldmia r1!, {r4 - r7} subs ip, ip, #16 orr r3, r3, r4, push #16 @@ -196,9 +196,9 @@ USER( strt r3, [r0], #4) @ May fault mov r6, r6, pull #16 orr r6, r6, r7, push #16 stmia r0!, {r3 - r6} @ Shouldnt fault - bpl .c2u_2cpy8lp + bpl .Lc2u_2cpy8lp -.c2u_2rem8lp: tst ip, #8 +.Lc2u_2rem8lp: tst ip, #8 movne r3, r7, pull #16 ldmneia r1!, {r4, r7} orrne r3, r3, r4, push #16 @@ -211,21 +211,21 @@ USER( strt r3, [r0], #4) @ May fault orrne r3, r3, r7, push #16 strnet r3, [r0], #4 @ Shouldnt fault ands ip, ip, #3 - beq .c2u_2fupi -.c2u_2nowords: mov r3, r7, get_byte_2 + beq .Lc2u_2fupi +.Lc2u_2nowords: mov r3, r7, get_byte_2 teq ip, #0 - beq .c2u_finished + beq .Lc2u_finished cmp ip, #2 USER( strbt r3, [r0], #1) @ May fault movge r3, r7, get_byte_3 USER( strgebt r3, [r0], #1) @ May fault ldrgtb r3, [r1], #0 USER( strgtbt r3, [r0], #1) @ May fault - b .c2u_finished + b .Lc2u_finished -.c2u_3fupi: subs r2, r2, #4 +.Lc2u_3fupi: subs r2, r2, #4 addmi ip, r2, #4 - bmi .c2u_3nowords + bmi .Lc2u_3nowords mov r3, r7, pull #24 ldr r7, [r1], #4 orr r3, r3, r7, push #8 @@ -233,14 +233,14 @@ USER( strt r3, [r0], #4) @ May fault mov ip, r0, lsl #32 - PAGE_SHIFT rsb ip, ip, #0 movs ip, ip, lsr #32 - PAGE_SHIFT - beq .c2u_3fupi + beq .Lc2u_3fupi cmp r2, ip movlt ip, r2 sub r2, r2, ip subs ip, ip, #16 - blt .c2u_3rem8lp + blt .Lc2u_3rem8lp -.c2u_3cpy8lp: mov r3, r7, pull #24 +.Lc2u_3cpy8lp: mov r3, r7, pull #24 ldmia r1!, {r4 - r7} subs ip, ip, #16 orr r3, r3, r4, push #8 @@ -251,9 +251,9 @@ USER( strt r3, [r0], #4) @ May fault mov r6, r6, pull #24 orr r6, r6, r7, push #8 stmia r0!, {r3 - r6} @ Shouldnt fault - bpl .c2u_3cpy8lp + bpl .Lc2u_3cpy8lp -.c2u_3rem8lp: tst ip, #8 +.Lc2u_3rem8lp: tst ip, #8 movne r3, r7, pull #24 ldmneia r1!, {r4, r7} orrne r3, r3, r4, push #8 @@ -266,17 +266,17 @@ USER( strt r3, [r0], #4) @ May fault orrne r3, r3, r7, push #8 strnet r3, [r0], #4 @ Shouldnt fault ands ip, ip, #3 - beq .c2u_3fupi -.c2u_3nowords: mov r3, r7, get_byte_3 + beq .Lc2u_3fupi +.Lc2u_3nowords: mov r3, r7, get_byte_3 teq ip, #0 - beq .c2u_finished + beq .Lc2u_finished cmp ip, #2 USER( strbt r3, [r0], #1) @ May fault ldrgeb r3, [r1], #1 USER( strgebt r3, [r0], #1) @ May fault ldrgtb r3, [r1], #0 USER( strgtbt r3, [r0], #1) @ May fault - b .c2u_finished + b .Lc2u_finished .section .fixup,"ax" .align 0 @@ -290,7 +290,7 @@ USER( strgtbt r3, [r0], #1) @ May fault * : n - number of bytes to copy * Returns : Number of bytes NOT copied. */ -.cfu_dest_not_aligned: +.Lcfu_dest_not_aligned: rsb ip, ip, #4 cmp ip, #2 USER( ldrbt r3, [r1], #1) @ May fault @@ -300,31 +300,32 @@ USER( ldrgebt r3, [r1], #1) @ May fault USER( ldrgtbt r3, [r1], #1) @ May fault strgtb r3, [r0], #1 sub r2, r2, ip - b .cfu_dest_aligned + b .Lcfu_dest_aligned ENTRY(__arch_copy_from_user) stmfd sp!, {r0, r2, r4 - r7, lr} cmp r2, #4 - blt .cfu_not_enough + blt .Lcfu_not_enough ands ip, r0, #3 - bne .cfu_dest_not_aligned -.cfu_dest_aligned: + bne .Lcfu_dest_not_aligned +.Lcfu_dest_aligned: ands ip, r1, #3 - bne .cfu_src_not_aligned + bne .Lcfu_src_not_aligned + /* * Seeing as there has to be at least 8 bytes to copy, we can * copy one word, and force a user-mode page fault... */ -.cfu_0fupi: subs r2, r2, #4 +.Lcfu_0fupi: subs r2, r2, #4 addmi ip, r2, #4 - bmi .cfu_0nowords + bmi .Lcfu_0nowords USER( ldrt r3, [r1], #4) str r3, [r0], #4 mov ip, r1, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction rsb ip, ip, #0 movs ip, ip, lsr #32 - PAGE_SHIFT - beq .cfu_0fupi + beq .Lcfu_0fupi /* * ip = max no. of bytes to copy before needing another "strt" insn */ @@ -332,16 +333,16 @@ USER( ldrt r3, [r1], #4) movlt ip, r2 sub r2, r2, ip subs ip, ip, #32 - blt .cfu_0rem8lp + blt .Lcfu_0rem8lp -.cfu_0cpy8lp: ldmia r1!, {r3 - r6} @ Shouldnt fault +.Lcfu_0cpy8lp: ldmia r1!, {r3 - r6} @ Shouldnt fault stmia r0!, {r3 - r6} ldmia r1!, {r3 - r6} @ Shouldnt fault subs ip, ip, #32 stmia r0!, {r3 - r6} - bpl .cfu_0cpy8lp + bpl .Lcfu_0cpy8lp -.cfu_0rem8lp: cmn ip, #16 +.Lcfu_0rem8lp: cmn ip, #16 ldmgeia r1!, {r3 - r6} @ Shouldnt fault stmgeia r0!, {r3 - r6} tst ip, #8 @@ -351,34 +352,34 @@ USER( ldrt r3, [r1], #4) ldrnet r3, [r1], #4 @ Shouldnt fault strne r3, [r0], #4 ands ip, ip, #3 - beq .cfu_0fupi -.cfu_0nowords: teq ip, #0 - beq .cfu_finished -.cfu_nowords: cmp ip, #2 + beq .Lcfu_0fupi +.Lcfu_0nowords: teq ip, #0 + beq .Lcfu_finished +.Lcfu_nowords: cmp ip, #2 USER( ldrbt r3, [r1], #1) @ May fault strb r3, [r0], #1 USER( ldrgebt r3, [r1], #1) @ May fault strgeb r3, [r0], #1 USER( ldrgtbt r3, [r1], #1) @ May fault strgtb r3, [r0], #1 - b .cfu_finished + b .Lcfu_finished -.cfu_not_enough: +.Lcfu_not_enough: movs ip, r2 - bne .cfu_nowords -.cfu_finished: mov r0, #0 + bne .Lcfu_nowords +.Lcfu_finished: mov r0, #0 add sp, sp, #8 LOADREGS(fd,sp!,{r4 - r7, pc}) -.cfu_src_not_aligned: +.Lcfu_src_not_aligned: bic r1, r1, #3 USER( ldrt r7, [r1], #4) @ May fault cmp ip, #2 - bgt .cfu_3fupi - beq .cfu_2fupi -.cfu_1fupi: subs r2, r2, #4 + bgt .Lcfu_3fupi + beq .Lcfu_2fupi +.Lcfu_1fupi: subs r2, r2, #4 addmi ip, r2, #4 - bmi .cfu_1nowords + bmi .Lcfu_1nowords mov r3, r7, pull #8 USER( ldrt r7, [r1], #4) @ May fault orr r3, r3, r7, push #24 @@ -386,14 +387,14 @@ USER( ldrt r7, [r1], #4) @ May fault mov ip, r1, lsl #32 - PAGE_SHIFT rsb ip, ip, #0 movs ip, ip, lsr #32 - PAGE_SHIFT - beq .cfu_1fupi + beq .Lcfu_1fupi cmp r2, ip movlt ip, r2 sub r2, r2, ip subs ip, ip, #16 - blt .cfu_1rem8lp + blt .Lcfu_1rem8lp -.cfu_1cpy8lp: mov r3, r7, pull #8 +.Lcfu_1cpy8lp: mov r3, r7, pull #8 ldmia r1!, {r4 - r7} @ Shouldnt fault subs ip, ip, #16 orr r3, r3, r4, push #24 @@ -404,9 +405,9 @@ USER( ldrt r7, [r1], #4) @ May fault mov r6, r6, pull #8 orr r6, r6, r7, push #24 stmia r0!, {r3 - r6} - bpl .cfu_1cpy8lp + bpl .Lcfu_1cpy8lp -.cfu_1rem8lp: tst ip, #8 +.Lcfu_1rem8lp: tst ip, #8 movne r3, r7, pull #8 ldmneia r1!, {r4, r7} @ Shouldnt fault orrne r3, r3, r4, push #24 @@ -419,21 +420,21 @@ USER( ldrnet r7, [r1], #4) @ May fault orrne r3, r3, r7, push #24 strne r3, [r0], #4 ands ip, ip, #3 - beq .cfu_1fupi -.cfu_1nowords: mov r3, r7, get_byte_1 + beq .Lcfu_1fupi +.Lcfu_1nowords: mov r3, r7, get_byte_1 teq ip, #0 - beq .cfu_finished + beq .Lcfu_finished cmp ip, #2 strb r3, [r0], #1 movge r3, r7, get_byte_2 strgeb r3, [r0], #1 movgt r3, r7, get_byte_3 strgtb r3, [r0], #1 - b .cfu_finished + b .Lcfu_finished -.cfu_2fupi: subs r2, r2, #4 +.Lcfu_2fupi: subs r2, r2, #4 addmi ip, r2, #4 - bmi .cfu_2nowords + bmi .Lcfu_2nowords mov r3, r7, pull #16 USER( ldrt r7, [r1], #4) @ May fault orr r3, r3, r7, push #16 @@ -441,14 +442,15 @@ USER( ldrt r7, [r1], #4) @ May fault mov ip, r1, lsl #32 - PAGE_SHIFT rsb ip, ip, #0 movs ip, ip, lsr #32 - PAGE_SHIFT - beq .cfu_2fupi + beq .Lcfu_2fupi cmp r2, ip movlt ip, r2 sub r2, r2, ip subs ip, ip, #16 - blt .cfu_2rem8lp + blt .Lcfu_2rem8lp + -.cfu_2cpy8lp: mov r3, r7, pull #16 +.Lcfu_2cpy8lp: mov r3, r7, pull #16 ldmia r1!, {r4 - r7} @ Shouldnt fault subs ip, ip, #16 orr r3, r3, r4, push #16 @@ -459,9 +461,9 @@ USER( ldrt r7, [r1], #4) @ May fault mov r6, r6, pull #16 orr r6, r6, r7, push #16 stmia r0!, {r3 - r6} - bpl .cfu_2cpy8lp + bpl .Lcfu_2cpy8lp -.cfu_2rem8lp: tst ip, #8 +.Lcfu_2rem8lp: tst ip, #8 movne r3, r7, pull #16 ldmneia r1!, {r4, r7} @ Shouldnt fault orrne r3, r3, r4, push #16 @@ -474,21 +476,21 @@ USER( ldrnet r7, [r1], #4) @ May fault orrne r3, r3, r7, push #16 strne r3, [r0], #4 ands ip, ip, #3 - beq .cfu_2fupi -.cfu_2nowords: mov r3, r7, get_byte_2 + beq .Lcfu_2fupi +.Lcfu_2nowords: mov r3, r7, get_byte_2 teq ip, #0 - beq .cfu_finished + beq .Lcfu_finished cmp ip, #2 strb r3, [r0], #1 movge r3, r7, get_byte_3 strgeb r3, [r0], #1 USER( ldrgtbt r3, [r1], #0) @ May fault strgtb r3, [r0], #1 - b .cfu_finished + b .Lcfu_finished -.cfu_3fupi: subs r2, r2, #4 +.Lcfu_3fupi: subs r2, r2, #4 addmi ip, r2, #4 - bmi .cfu_3nowords + bmi .Lcfu_3nowords mov r3, r7, pull #24 USER( ldrt r7, [r1], #4) @ May fault orr r3, r3, r7, push #8 @@ -496,14 +498,14 @@ USER( ldrt r7, [r1], #4) @ May fault mov ip, r1, lsl #32 - PAGE_SHIFT rsb ip, ip, #0 movs ip, ip, lsr #32 - PAGE_SHIFT - beq .cfu_3fupi + beq .Lcfu_3fupi cmp r2, ip movlt ip, r2 sub r2, r2, ip subs ip, ip, #16 - blt .cfu_3rem8lp + blt .Lcfu_3rem8lp -.cfu_3cpy8lp: mov r3, r7, pull #24 +.Lcfu_3cpy8lp: mov r3, r7, pull #24 ldmia r1!, {r4 - r7} @ Shouldnt fault orr r3, r3, r4, push #8 mov r4, r4, pull #24 @@ -514,9 +516,9 @@ USER( ldrt r7, [r1], #4) @ May fault orr r6, r6, r7, push #8 stmia r0!, {r3 - r6} subs ip, ip, #16 - bpl .cfu_3cpy8lp + bpl .Lcfu_3cpy8lp -.cfu_3rem8lp: tst ip, #8 +.Lcfu_3rem8lp: tst ip, #8 movne r3, r7, pull #24 ldmneia r1!, {r4, r7} @ Shouldnt fault orrne r3, r3, r4, push #8 @@ -529,17 +531,17 @@ USER( ldrnet r7, [r1], #4) @ May fault orrne r3, r3, r7, push #8 strne r3, [r0], #4 ands ip, ip, #3 - beq .cfu_3fupi -.cfu_3nowords: mov r3, r7, get_byte_3 + beq .Lcfu_3fupi +.Lcfu_3nowords: mov r3, r7, get_byte_3 teq ip, #0 - beq .cfu_finished + beq .Lcfu_finished cmp ip, #2 strb r3, [r0], #1 USER( ldrgebt r3, [r1], #1) @ May fault strgeb r3, [r0], #1 USER( ldrgtbt r3, [r1], #1) @ May fault strgtb r3, [r0], #1 - b .cfu_finished + b .Lcfu_finished .section .fixup,"ax" .align 0 diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index ae7c64b8cec3..048c9c19aa4f 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Mon Oct 10 09:46:25 2005 +# Last update: Fri Nov 11 21:55:04 2005 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -460,7 +460,7 @@ esl_sarva MACH_ESL_SARVA ESL_SARVA 443 xm250 MACH_XM250 XM250 444 t6tc1xb MACH_T6TC1XB T6TC1XB 445 ess710 MACH_ESS710 ESS710 446 -mx31ads MACH_MX3ADS MX3ADS 447 +mx31ads MACH_MX31ADS MX31ADS 447 himalaya MACH_HIMALAYA HIMALAYA 448 bolfenk MACH_BOLFENK BOLFENK 449 at91rm9200kr MACH_AT91RM9200KR AT91RM9200KR 450 @@ -802,7 +802,7 @@ cpuat91 MACH_CPUAT91 CPUAT91 787 rea9200 MACH_REA9200 REA9200 788 acts_pune_sa1110 MACH_ACTS_PUNE_SA1110 ACTS_PUNE_SA1110 789 ixp425 MACH_IXP425 IXP425 790 -argonplusodyssey MACH_ODYSSEY ODYSSEY 791 +argonplusodyssey MACH_ARGONPLUSODYSSEY ARGONPLUSODYSSEY 791 perch MACH_PERCH PERCH 792 eis05r1 MACH_EIS05R1 EIS05R1 793 pepperpad MACH_PEPPERPAD PEPPERPAD 794 @@ -816,7 +816,7 @@ iq_nextgen_c MACH_IQ_NEXTGEN_C IQ_NEXTGEN_C 801 iq_nextgen_d MACH_IQ_NEXTGEN_D IQ_NEXTGEN_D 802 iq_nextgen_e MACH_IQ_NEXTGEN_E IQ_NEXTGEN_E 803 mallow_at91 MACH_MALLOW_AT91 MALLOW_AT91 804 -cybertracker MACH_CYBERTRACKER CYBERTRACKER 805 +cybertracker_i MACH_CYBERTRACKER_I CYBERTRACKER_I 805 gesbc931x MACH_GESBC931X GESBC931X 806 centipad MACH_CENTIPAD CENTIPAD 807 armsoc MACH_ARMSOC ARMSOC 808 @@ -869,3 +869,38 @@ davinci_dvdp MACH_DAVINCI_DVDP DAVINCI_DVDP 854 htcuniversal MACH_HTCUNIVERSAL HTCUNIVERSAL 855 tpad MACH_TPAD TPAD 856 roverp3 MACH_ROVERP3 ROVERP3 857 +jornada928 MACH_JORNADA928 JORNADA928 858 +mv88fxx81 MACH_MV88FXX81 MV88FXX81 859 +stmp36xx MACH_STMP36XX STMP36XX 860 +sxni79524 MACH_SXNI79524 SXNI79524 861 +ams_delta MACH_AMS_DELTA AMS_DELTA 862 +uranium MACH_URANIUM URANIUM 863 +ucon MACH_UCON UCON 864 +nas100d MACH_NAS100D NAS100D 865 +l083 MACH_L083_1000 L083_1000 866 +ezx MACH_EZX EZX 867 +pnx5220 MACH_PNX5220 PNX5220 868 +butte MACH_BUTTE BUTTE 869 +srm2 MACH_SRM2 SRM2 870 +dsbr MACH_DSBR DSBR 871 +crystalball MACH_CRYSTALBALL CRYSTALBALL 872 +tinypxa27x MACH_TINYPXA27X TINYPXA27X 873 +herbie MACH_HERBIE HERBIE 874 +magician MACH_MAGICIAN MAGICIAN 875 +cm4002 MACH_CM4002 CM4002 876 +b4 MACH_B4 B4 877 +maui MACH_MAUI MAUI 878 +cybertracker_g MACH_CYBERTRACKER_G CYBERTRACKER_G 879 +nxdkn MACH_NXDKN NXDKN 880 +mio8390 MACH_MIO8390 MIO8390 881 +omi_board MACH_OMI_BOARD OMI_BOARD 882 +mx21civ MACH_MX21CIV MX21CIV 883 +mahi_cdac MACH_MAHI_CDAC MAHI_CDAC 884 +xscale_palmtx MACH_XSCALE_PALMTX XSCALE_PALMTX 885 +arch_s3c2413 MACH_ARCH_S3C2413 ARCH_S3C2413 886 +s3c2413 MACH_S3C2413 S3C2413 887 +samsys_ep0 MACH_SAMSYS_EP0 SAMSYS_EP0 888 +wg302v1 MACH_WG302V1 WG302V1 889 +wg302v2 MACH_WG302V2 WG302V2 890 +eb42x MACH_EB42X EB42X 891 +iq331es MACH_IQ331ES IQ331ES 892 diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index d4de8a4814be..8796e12c56f3 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -164,6 +164,19 @@ config IA64_PAGE_SIZE_64KB endchoice +choice + prompt "Page Table Levels" + default PGTABLE_3 + +config PGTABLE_3 + bool "3 Levels" + +config PGTABLE_4 + depends on !IA64_PAGE_SIZE_64KB + bool "4 Levels" + +endchoice + source kernel/Kconfig.hz config IA64_BRL_EMU diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig index 08112ab38468..87cfd31a4a39 100644 --- a/arch/ia64/configs/sn2_defconfig +++ b/arch/ia64/configs/sn2_defconfig @@ -80,6 +80,8 @@ CONFIG_MCKINLEY=y # CONFIG_IA64_PAGE_SIZE_8KB is not set CONFIG_IA64_PAGE_SIZE_16KB=y # CONFIG_IA64_PAGE_SIZE_64KB is not set +# CONFIG_PGTABLE_3 is not set +CONFIG_PGTABLE_4=y # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig index 6e3f147e03e5..275a26c6e5aa 100644 --- a/arch/ia64/defconfig +++ b/arch/ia64/defconfig @@ -82,6 +82,8 @@ CONFIG_MCKINLEY=y # CONFIG_IA64_PAGE_SIZE_8KB is not set CONFIG_IA64_PAGE_SIZE_16KB=y # CONFIG_IA64_PAGE_SIZE_64KB is not set +CONFIG_PGTABLE_3=y +# CONFIG_PGTABLE_4 is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S index c13ca0d49c4a..e06f21f60dc5 100644 --- a/arch/ia64/kernel/ivt.S +++ b/arch/ia64/kernel/ivt.S @@ -114,7 +114,7 @@ ENTRY(vhpt_miss) shl r21=r16,3 // shift bit 60 into sign bit shr.u r17=r16,61 // get the region number into r17 ;; - shr r22=r21,3 + shr.u r22=r21,3 #ifdef CONFIG_HUGETLB_PAGE extr.u r26=r25,2,6 ;; @@ -140,20 +140,34 @@ ENTRY(vhpt_miss) (p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=PTA + IFA(33,42)*8 (p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8) cmp.eq p7,p6=0,r21 // unused address bits all zeroes? - shr.u r18=r22,PMD_SHIFT // shift L2 index into position +#ifdef CONFIG_PGTABLE_4 + shr.u r28=r22,PUD_SHIFT // shift L2 index into position +#else + shr.u r18=r22,PMD_SHIFT // shift L3 index into position +#endif ;; ld8 r17=[r17] // fetch the L1 entry (may be 0) ;; (p7) cmp.eq p6,p7=r17,r0 // was L1 entry NULL? - dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry +#ifdef CONFIG_PGTABLE_4 + dep r28=r28,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry + ;; + shr.u r18=r22,PMD_SHIFT // shift L3 index into position +(p7) ld8 r29=[r28] // fetch the L2 entry (may be 0) ;; -(p7) ld8 r20=[r17] // fetch the L2 entry (may be 0) - shr.u r19=r22,PAGE_SHIFT // shift L3 index into position +(p7) cmp.eq.or.andcm p6,p7=r29,r0 // was L2 entry NULL? + dep r17=r18,r29,3,(PAGE_SHIFT-3) // compute address of L3 page table entry +#else + dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L3 page table entry +#endif ;; -(p7) cmp.eq.or.andcm p6,p7=r20,r0 // was L2 entry NULL? - dep r21=r19,r20,3,(PAGE_SHIFT-3) // compute address of L3 page table entry +(p7) ld8 r20=[r17] // fetch the L3 entry (may be 0) + shr.u r19=r22,PAGE_SHIFT // shift L4 index into position ;; -(p7) ld8 r18=[r21] // read the L3 PTE +(p7) cmp.eq.or.andcm p6,p7=r20,r0 // was L3 entry NULL? + dep r21=r19,r20,3,(PAGE_SHIFT-3) // compute address of L4 page table entry + ;; +(p7) ld8 r18=[r21] // read the L4 PTE mov r19=cr.isr // cr.isr bit 0 tells us if this is an insn miss ;; (p7) tbit.z p6,p7=r18,_PAGE_P_BIT // page present bit cleared? @@ -192,14 +206,21 @@ ENTRY(vhpt_miss) * between reading the pagetable and the "itc". If so, flush the entry we * inserted and retry. */ - ld8 r25=[r21] // read L3 PTE again - ld8 r26=[r17] // read L2 entry again + ld8 r25=[r21] // read L4 entry again + ld8 r26=[r17] // read L3 PTE again +#ifdef CONFIG_PGTABLE_4 + ld8 r18=[r28] // read L2 entry again +#endif + cmp.ne p6,p7=r0,r0 ;; - cmp.ne p6,p7=r26,r20 // did L2 entry change + cmp.ne.or.andcm p6,p7=r26,r20 // did L3 entry change +#ifdef CONFIG_PGTABLE_4 + cmp.ne.or.andcm p6,p7=r29,r18 // did L4 PTE change +#endif mov r27=PAGE_SHIFT<<2 ;; (p6) ptc.l r22,r27 // purge PTE page translation -(p7) cmp.ne.or.andcm p6,p7=r25,r18 // did L3 PTE change +(p7) cmp.ne.or.andcm p6,p7=r25,r18 // did L4 PTE change ;; (p6) ptc.l r16,r27 // purge translation #endif @@ -432,18 +453,30 @@ ENTRY(nested_dtlb_miss) (p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=PTA + IFA(33,42)*8 (p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8) cmp.eq p7,p6=0,r21 // unused address bits all zeroes? - shr.u r18=r22,PMD_SHIFT // shift L2 index into position +#ifdef CONFIG_PGTABLE_4 + shr.u r18=r22,PUD_SHIFT // shift L2 index into position +#else + shr.u r18=r22,PMD_SHIFT // shift L3 index into position +#endif ;; ld8 r17=[r17] // fetch the L1 entry (may be 0) ;; (p7) cmp.eq p6,p7=r17,r0 // was L1 entry NULL? dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry ;; +#ifdef CONFIG_PGTABLE_4 (p7) ld8 r17=[r17] // fetch the L2 entry (may be 0) - shr.u r19=r22,PAGE_SHIFT // shift L3 index into position + shr.u r18=r22,PMD_SHIFT // shift L3 index into position ;; (p7) cmp.eq.or.andcm p6,p7=r17,r0 // was L2 entry NULL? - dep r17=r19,r17,3,(PAGE_SHIFT-3) // compute address of L3 page table entry + dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry + ;; +#endif +(p7) ld8 r17=[r17] // fetch the L3 entry (may be 0) + shr.u r19=r22,PAGE_SHIFT // shift L4 index into position + ;; +(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was L3 entry NULL? + dep r17=r19,r17,3,(PAGE_SHIFT-3) // compute address of L4 page table entry (p6) br.cond.spnt page_fault mov b0=r30 br.sptk.many b0 // return to continuation point diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index 0fb579ef18c2..e510dce9971f 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -30,6 +30,7 @@ #include <linux/root_dev.h> #include <linux/nodemask.h> #include <linux/pm.h> +#include <linux/efi.h> #include <asm/io.h> #include <asm/sal.h> @@ -242,6 +243,135 @@ static void __init sn_check_for_wars(void) } } +/* + * Scan the EFI PCDP table (if it exists) for an acceptable VGA console + * output device. If one exists, pick it and set sn_legacy_{io,mem} to + * reflect the bus offsets needed to address it. + * + * Since pcdp support in SN is not supported in the 2.4 kernel (or at least + * the one lbs is based on) just declare the needed structs here. + * + * Reference spec http://www.dig64.org/specifications/DIG64_PCDPv20.pdf + * + * Returns 0 if no acceptable vga is found, !0 otherwise. + * + * Note: This stuff is duped here because Altix requires the PCDP to + * locate a usable VGA device due to lack of proper ACPI support. Structures + * could be used from drivers/firmware/pcdp.h, but it was decided that moving + * this file to a more public location just for Altix use was undesireable. + */ + +struct hcdp_uart_desc { + u8 pad[45]; +}; + +struct pcdp { + u8 signature[4]; /* should be 'HCDP' */ + u32 length; + u8 rev; /* should be >=3 for pcdp, <3 for hcdp */ + u8 sum; + u8 oem_id[6]; + u64 oem_tableid; + u32 oem_rev; + u32 creator_id; + u32 creator_rev; + u32 num_type0; + struct hcdp_uart_desc uart[0]; /* num_type0 of these */ + /* pcdp descriptors follow */ +} __attribute__((packed)); + +struct pcdp_device_desc { + u8 type; + u8 primary; + u16 length; + u16 index; + /* interconnect specific structure follows */ + /* device specific structure follows that */ +} __attribute__((packed)); + +struct pcdp_interface_pci { + u8 type; /* 1 == pci */ + u8 reserved; + u16 length; + u8 segment; + u8 bus; + u8 dev; + u8 fun; + u16 devid; + u16 vendid; + u32 acpi_interrupt; + u64 mmio_tra; + u64 ioport_tra; + u8 flags; + u8 translation; +} __attribute__((packed)); + +struct pcdp_vga_device { + u8 num_eas_desc; + /* ACPI Extended Address Space Desc follows */ +} __attribute__((packed)); + +/* from pcdp_device_desc.primary */ +#define PCDP_PRIMARY_CONSOLE 0x01 + +/* from pcdp_device_desc.type */ +#define PCDP_CONSOLE_INOUT 0x0 +#define PCDP_CONSOLE_DEBUG 0x1 +#define PCDP_CONSOLE_OUT 0x2 +#define PCDP_CONSOLE_IN 0x3 +#define PCDP_CONSOLE_TYPE_VGA 0x8 + +#define PCDP_CONSOLE_VGA (PCDP_CONSOLE_TYPE_VGA | PCDP_CONSOLE_OUT) + +/* from pcdp_interface_pci.type */ +#define PCDP_IF_PCI 1 + +/* from pcdp_interface_pci.translation */ +#define PCDP_PCI_TRANS_IOPORT 0x02 +#define PCDP_PCI_TRANS_MMIO 0x01 + +static void +sn_scan_pcdp(void) +{ + u8 *bp; + struct pcdp *pcdp; + struct pcdp_device_desc device; + struct pcdp_interface_pci if_pci; + extern struct efi efi; + + pcdp = efi.hcdp; + if (! pcdp) + return; /* no hcdp/pcdp table */ + + if (pcdp->rev < 3) + return; /* only support PCDP (rev >= 3) */ + + for (bp = (u8 *)&pcdp->uart[pcdp->num_type0]; + bp < (u8 *)pcdp + pcdp->length; + bp += device.length) { + memcpy(&device, bp, sizeof(device)); + if (! (device.primary & PCDP_PRIMARY_CONSOLE)) + continue; /* not primary console */ + + if (device.type != PCDP_CONSOLE_VGA) + continue; /* not VGA descriptor */ + + memcpy(&if_pci, bp+sizeof(device), sizeof(if_pci)); + if (if_pci.type != PCDP_IF_PCI) + continue; /* not PCI interconnect */ + + if (if_pci.translation & PCDP_PCI_TRANS_IOPORT) + vga_console_iobase = + if_pci.ioport_tra | __IA64_UNCACHED_OFFSET; + + if (if_pci.translation & PCDP_PCI_TRANS_MMIO) + vga_console_membase = + if_pci.mmio_tra | __IA64_UNCACHED_OFFSET; + + break; /* once we find the primary, we're done */ + } +} + /** * sn_setup - SN platform setup routine * @cmdline_p: kernel command line @@ -263,16 +393,35 @@ void __init sn_setup(char **cmdline_p) #if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) /* - * If there was a primary vga adapter identified through the - * EFI PCDP table, make it the preferred console. Otherwise - * zero out conswitchp. + * Handle SN vga console. + * + * SN systems do not have enough ACPI table information + * being passed from prom to identify VGA adapters and the legacy + * addresses to access them. Until that is done, SN systems rely + * on the PCDP table to identify the primary VGA console if one + * exists. + * + * However, kernel PCDP support is optional, and even if it is built + * into the kernel, it will not be used if the boot cmdline contains + * console= directives. + * + * So, to work around this mess, we duplicate some of the PCDP code + * here so that the primary VGA console (as defined by PCDP) will + * work on SN systems even if a different console (e.g. serial) is + * selected on the boot line (or CONFIG_EFI_PCDP is off). */ + if (! vga_console_membase) + sn_scan_pcdp(); + if (vga_console_membase) { /* usable vga ... make tty0 the preferred default console */ - add_preferred_console("tty", 0, NULL); + if (!strstr(*cmdline_p, "console=")) + add_preferred_console("tty", 0, NULL); } else { printk(KERN_DEBUG "SGI: Disabling VGA console\n"); + if (!strstr(*cmdline_p, "console=")) + add_preferred_console("ttySG", 0, NULL); #ifdef CONFIG_DUMMY_CONSOLE conswitchp = &dummy_con; #else diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 28002de783b6..13b8a9bed66e 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -98,6 +98,10 @@ */ /* + * 1998/1/21 -- Richard Gooch <rgooch@atnf.csiro.au> -- devfs support + */ + +/* * 1998/05/07 -- Russell King -- More portability cleanups; moved definition of * interrupt and dma channel to asm/floppy.h. Cleaned up some formatting & * use of '0' for NULL. @@ -158,10 +162,6 @@ static int print_unex = 1; #define FDPATCHES #include <linux/fdreg.h> -/* - * 1998/1/21 -- Richard Gooch <rgooch@atnf.csiro.au> -- devfs support - */ - #include <linux/fd.h> #include <linux/hdreg.h> diff --git a/drivers/char/ftape/lowlevel/ftape-buffer.c b/drivers/char/ftape/lowlevel/ftape-buffer.c index 54af20cd9a2c..c706ff162771 100644 --- a/drivers/char/ftape/lowlevel/ftape-buffer.c +++ b/drivers/char/ftape/lowlevel/ftape-buffer.c @@ -33,6 +33,7 @@ #include "../lowlevel/ftape-rw.h" #include "../lowlevel/ftape-read.h" #include "../lowlevel/ftape-tracing.h" +#include "../lowlevel/ftape-buffer.h" /* DMA'able memory allocation stuff. */ diff --git a/fs/afs/callback.c b/fs/afs/callback.c index 2fd62f89ae01..9cb206e9d4be 100644 --- a/fs/afs/callback.c +++ b/fs/afs/callback.c @@ -19,6 +19,7 @@ #include "server.h" #include "vnode.h" #include "internal.h" +#include "cmservice.h" /*****************************************************************************/ /* diff --git a/fs/befs/attribute.c b/fs/befs/attribute.c deleted file mode 100644 index e329d727053e..000000000000 --- a/fs/befs/attribute.c +++ /dev/null @@ -1,117 +0,0 @@ -/* - * linux/fs/befs/attribute.c - * - * Copyright (C) 2002 Will Dyson <will_dyson@pobox.com> - * - * Many thanks to Dominic Giampaolo, author of "Practical File System - * Design with the Be File System", for such a helpful book. - * - */ - -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/string.h> - -#include "befs.h" -#include "endian.h" - -#define SD_DATA(sd)\ - (void*)((char*)sd + sizeof(*sd) + (sd->name_size - sizeof(sd->name))) - -#define SD_NEXT(sd)\ - (befs_small_data*)((char*)sd + sizeof(*sd) + (sd->name_size - \ - sizeof(sd->name) + sd->data_size)) - -int -list_small_data(struct super_block *sb, befs_inode * inode, filldir_t filldir); - -befs_small_data * -find_small_data(struct super_block *sb, befs_inode * inode, - const char *name); -int -read_small_data(struct super_block *sb, befs_inode * inode, - befs_small_data * sdata, void *buf, size_t bufsize); - -/** - * - * - * - * - * - */ -befs_small_data * -find_small_data(struct super_block *sb, befs_inode * inode, const char *name) -{ - befs_small_data *sdata = inode->small_data; - - while (sdata->type != 0) { - if (strcmp(name, sdata->name) != 0) { - return sdata; - } - sdata = SD_NEXT(sdata); - } - return NULL; -} - -/** - * - * - * - * - * - */ -int -read_small_data(struct super_block *sb, befs_inode * inode, - const char *name, void *buf, size_t bufsize) -{ - befs_small_data *sdata; - - sdata = find_small_data(sb, inode, name); - if (sdata == NULL) - return BEFS_ERR; - else if (sdata->data_size > bufsize) - return BEFS_ERR; - - memcpy(buf, SD_DATA(sdata), sdata->data_size); - - return BEFS_OK; -} - -/** - * - * - * - * - * - */ -int -list_small_data(struct super_block *sb, befs_inode * inode) -{ - -} - -/** - * - * - * - * - * - */ -int -list_attr(struct super_block *sb, befs_inode * inode) -{ - -} - -/** - * - * - * - * - * - */ -int -read_attr(struct super_block *sb, befs_inode * inode) -{ - -} diff --git a/fs/freevxfs/vxfs_bmap.c b/fs/freevxfs/vxfs_bmap.c index d3f6b2835bc8..2d71128bd8d6 100644 --- a/fs/freevxfs/vxfs_bmap.c +++ b/fs/freevxfs/vxfs_bmap.c @@ -36,6 +36,7 @@ #include "vxfs.h" #include "vxfs_inode.h" +#include "vxfs_extern.h" #ifdef DIAGNOSTIC diff --git a/fs/freevxfs/vxfs_olt.c b/fs/freevxfs/vxfs_olt.c index 133476201d84..76a0708ae978 100644 --- a/fs/freevxfs/vxfs_olt.c +++ b/fs/freevxfs/vxfs_olt.c @@ -36,6 +36,7 @@ #include "vxfs.h" #include "vxfs_olt.h" +#include "vxfs_extern.h" static inline void diff --git a/fs/ioprio.c b/fs/ioprio.c index d1c1f2b2c9da..4bf1c6365a19 100644 --- a/fs/ioprio.c +++ b/fs/ioprio.c @@ -22,6 +22,7 @@ #include <linux/kernel.h> #include <linux/ioprio.h> #include <linux/blkdev.h> +#include <linux/syscalls.h> static int set_task_ioprio(struct task_struct *task, int ioprio) { diff --git a/fs/jffs/jffs_fm.c b/fs/jffs/jffs_fm.c index 053e3a98a276..6da13b309bd1 100644 --- a/fs/jffs/jffs_fm.c +++ b/fs/jffs/jffs_fm.c @@ -20,6 +20,7 @@ #include <linux/blkdev.h> #include <linux/jffs.h> #include "jffs_fm.h" +#include "intrep.h" #if defined(JFFS_MARK_OBSOLETE) && JFFS_MARK_OBSOLETE static int jffs_mark_obsolete(struct jffs_fmcontrol *fmc, __u32 fm_offset); diff --git a/fs/partitions/ultrix.c b/fs/partitions/ultrix.c index 8a8d4d9db314..ec852c11dce4 100644 --- a/fs/partitions/ultrix.c +++ b/fs/partitions/ultrix.c @@ -7,6 +7,7 @@ */ #include "check.h" +#include "ultrix.h" int ultrix_partition(struct parsed_partitions *state, struct block_device *bdev) { diff --git a/fs/reiserfs/hashes.c b/fs/reiserfs/hashes.c index 37c1306eb9b7..a3ec238fd9e0 100644 --- a/fs/reiserfs/hashes.c +++ b/fs/reiserfs/hashes.c @@ -19,6 +19,7 @@ // #include <linux/kernel.h> +#include <linux/reiserfs_fs.h> #include <asm/types.h> #include <asm/bug.h> diff --git a/include/asm-ia64/page.h b/include/asm-ia64/page.h index 9d41548b7fef..9dd9da105278 100644 --- a/include/asm-ia64/page.h +++ b/include/asm-ia64/page.h @@ -47,8 +47,6 @@ #define PERCPU_PAGE_SHIFT 16 /* log2() of max. size of per-CPU area */ #define PERCPU_PAGE_SIZE (__IA64_UL_CONST(1) << PERCPU_PAGE_SHIFT) -#define RGN_MAP_LIMIT ((1UL << (4*PAGE_SHIFT - 12)) - PAGE_SIZE) /* per region addr limit */ - #ifdef CONFIG_HUGETLB_PAGE # define HPAGE_REGION_BASE RGN_BASE(RGN_HPAGE) @@ -175,11 +173,17 @@ get_order (unsigned long size) */ typedef struct { unsigned long pte; } pte_t; typedef struct { unsigned long pmd; } pmd_t; +#ifdef CONFIG_PGTABLE_4 + typedef struct { unsigned long pud; } pud_t; +#endif typedef struct { unsigned long pgd; } pgd_t; typedef struct { unsigned long pgprot; } pgprot_t; # define pte_val(x) ((x).pte) # define pmd_val(x) ((x).pmd) +#ifdef CONFIG_PGTABLE_4 +# define pud_val(x) ((x).pud) +#endif # define pgd_val(x) ((x).pgd) # define pgprot_val(x) ((x).pgprot) diff --git a/include/asm-ia64/pgalloc.h b/include/asm-ia64/pgalloc.h index a5f214554afd..f2f233846476 100644 --- a/include/asm-ia64/pgalloc.h +++ b/include/asm-ia64/pgalloc.h @@ -86,6 +86,25 @@ static inline void pgd_free(pgd_t * pgd) pgtable_quicklist_free(pgd); } +#ifdef CONFIG_PGTABLE_4 +static inline void +pgd_populate(struct mm_struct *mm, pgd_t * pgd_entry, pud_t * pud) +{ + pgd_val(*pgd_entry) = __pa(pud); +} + +static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr) +{ + return pgtable_quicklist_alloc(); +} + +static inline void pud_free(pud_t * pud) +{ + pgtable_quicklist_free(pud); +} +#define __pud_free_tlb(tlb, pud) pud_free(pud) +#endif /* CONFIG_PGTABLE_4 */ + static inline void pud_populate(struct mm_struct *mm, pud_t * pud_entry, pmd_t * pmd) { diff --git a/include/asm-ia64/pgtable.h b/include/asm-ia64/pgtable.h index c34ba80c1c31..e2560c58384b 100644 --- a/include/asm-ia64/pgtable.h +++ b/include/asm-ia64/pgtable.h @@ -84,32 +84,55 @@ #define __DIRTY_BITS _PAGE_ED | __DIRTY_BITS_NO_ED /* - * Definitions for first level: - * - * PGDIR_SHIFT determines what a first-level page table entry can map. + * How many pointers will a page table level hold expressed in shift */ -#define PGDIR_SHIFT (PAGE_SHIFT + 2*(PAGE_SHIFT-3)) -#define PGDIR_SIZE (__IA64_UL(1) << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) -#define PTRS_PER_PGD (1UL << (PAGE_SHIFT-3)) -#define USER_PTRS_PER_PGD (5*PTRS_PER_PGD/8) /* regions 0-4 are user regions */ -#define FIRST_USER_ADDRESS 0 +#define PTRS_PER_PTD_SHIFT (PAGE_SHIFT-3) /* - * Definitions for second level: + * Definitions for fourth level: + */ +#define PTRS_PER_PTE (__IA64_UL(1) << (PTRS_PER_PTD_SHIFT)) + +/* + * Definitions for third level: * - * PMD_SHIFT determines the size of the area a second-level page table + * PMD_SHIFT determines the size of the area a third-level page table * can map. */ -#define PMD_SHIFT (PAGE_SHIFT + (PAGE_SHIFT-3)) +#define PMD_SHIFT (PAGE_SHIFT + (PTRS_PER_PTD_SHIFT)) #define PMD_SIZE (1UL << PMD_SHIFT) #define PMD_MASK (~(PMD_SIZE-1)) -#define PTRS_PER_PMD (1UL << (PAGE_SHIFT-3)) +#define PTRS_PER_PMD (1UL << (PTRS_PER_PTD_SHIFT)) +#ifdef CONFIG_PGTABLE_4 /* - * Definitions for third level: + * Definitions for second level: + * + * PUD_SHIFT determines the size of the area a second-level page table + * can map. */ -#define PTRS_PER_PTE (__IA64_UL(1) << (PAGE_SHIFT-3)) +#define PUD_SHIFT (PMD_SHIFT + (PTRS_PER_PTD_SHIFT)) +#define PUD_SIZE (1UL << PUD_SHIFT) +#define PUD_MASK (~(PUD_SIZE-1)) +#define PTRS_PER_PUD (1UL << (PTRS_PER_PTD_SHIFT)) +#endif + +/* + * Definitions for first level: + * + * PGDIR_SHIFT determines what a first-level page table entry can map. + */ +#ifdef CONFIG_PGTABLE_4 +#define PGDIR_SHIFT (PUD_SHIFT + (PTRS_PER_PTD_SHIFT)) +#else +#define PGDIR_SHIFT (PMD_SHIFT + (PTRS_PER_PTD_SHIFT)) +#endif +#define PGDIR_SIZE (__IA64_UL(1) << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) +#define PTRS_PER_PGD_SHIFT PTRS_PER_PTD_SHIFT +#define PTRS_PER_PGD (1UL << PTRS_PER_PGD_SHIFT) +#define USER_PTRS_PER_PGD (5*PTRS_PER_PGD/8) /* regions 0-4 are user regions */ +#define FIRST_USER_ADDRESS 0 /* * All the normal masks have the "page accessed" bits on, as any time @@ -161,6 +184,9 @@ #define __S111 __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RWX) #define pgd_ERROR(e) printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e)) +#ifdef CONFIG_PGTABLE_4 +#define pud_ERROR(e) printk("%s:%d: bad pud %016lx.\n", __FILE__, __LINE__, pud_val(e)) +#endif #define pmd_ERROR(e) printk("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e)) #define pte_ERROR(e) printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e)) @@ -218,6 +244,9 @@ ia64_phys_addr_valid (unsigned long addr) #define kc_vaddr_to_offset(v) ((v) - RGN_BASE(RGN_GATE)) #define kc_offset_to_vaddr(o) ((o) + RGN_BASE(RGN_GATE)) +#define RGN_MAP_SHIFT (PGDIR_SHIFT + PTRS_PER_PGD_SHIFT - 3) +#define RGN_MAP_LIMIT ((1UL << RGN_MAP_SHIFT) - PAGE_SIZE) /* per region addr limit */ + /* * Conversion functions: convert page frame number (pfn) and a protection value to a page * table entry (pte). @@ -254,9 +283,16 @@ ia64_phys_addr_valid (unsigned long addr) #define pud_bad(pud) (!ia64_phys_addr_valid(pud_val(pud))) #define pud_present(pud) (pud_val(pud) != 0UL) #define pud_clear(pudp) (pud_val(*(pudp)) = 0UL) - #define pud_page(pud) ((unsigned long) __va(pud_val(pud) & _PFN_MASK)) +#ifdef CONFIG_PGTABLE_4 +#define pgd_none(pgd) (!pgd_val(pgd)) +#define pgd_bad(pgd) (!ia64_phys_addr_valid(pgd_val(pgd))) +#define pgd_present(pgd) (pgd_val(pgd) != 0UL) +#define pgd_clear(pgdp) (pgd_val(*(pgdp)) = 0UL) +#define pgd_page(pgd) ((unsigned long) __va(pgd_val(pgd) & _PFN_MASK)) +#endif + /* * The following have defined behavior only work if pte_present() is true. */ @@ -324,7 +360,13 @@ pgd_offset (struct mm_struct *mm, unsigned long address) here. */ #define pgd_offset_gate(mm, addr) pgd_offset_k(addr) +#ifdef CONFIG_PGTABLE_4 /* Find an entry in the second-level page table.. */ +#define pud_offset(dir,addr) \ + ((pud_t *) pgd_page(*(dir)) + (((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))) +#endif + +/* Find an entry in the third-level page table.. */ #define pmd_offset(dir,addr) \ ((pmd_t *) pud_page(*(dir)) + (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))) @@ -557,7 +599,9 @@ do { \ #define __HAVE_ARCH_PGD_OFFSET_GATE #define __HAVE_ARCH_LAZY_MMU_PROT_UPDATE +#ifndef CONFIG_PGTABLE_4 #include <asm-generic/pgtable-nopud.h> +#endif #include <asm-generic/pgtable.h> #endif /* _ASM_IA64_PGTABLE_H */ diff --git a/include/linux/idr.h b/include/linux/idr.h index 7fb3ff9c7b0e..d37c8d808b0f 100644 --- a/include/linux/idr.h +++ b/include/linux/idr.h @@ -8,6 +8,10 @@ * Small id to pointer translation service avoiding fixed sized * tables. */ + +#ifndef __IDR_H__ +#define __IDR_H__ + #include <linux/types.h> #include <linux/bitops.h> @@ -77,3 +81,5 @@ int idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id); void idr_remove(struct idr *idp, int id); void idr_destroy(struct idr *idp); void idr_init(struct idr *idp); + +#endif /* __IDR_H__ */ diff --git a/mm/slab.c b/mm/slab.c index e291f5e1afbb..8a73dcfc6a27 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -434,7 +434,7 @@ struct kmem_cache { /* Optimization question: fewer reaps means less * probability for unnessary cpucache drain/refill cycles. * - * OTHO the cpuarrays can contain lots of objects, + * OTOH the cpuarrays can contain lots of objects, * which could lock up otherwise freeable slabs. */ #define REAPTIMEOUT_CPUC (2*HZ) |