Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input subsystem updates from Dmitry Torokhov: - updated support for Synaptics RMI4 devices, including support for SMBus controllers, firmware update support, sensor tuning, and PS/2 guest support - ALPS driver now supports tracksticks on SS5 controllers - i8042 now uses chassis info to skip selftest on Asus laptops as list of individual models became too unwieldy - miscellaneous fixes to other drivers * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (67 commits) Input: imx6ul_tsc - generalize the averaging property Input: drv260x - use generic device properties Input: drv260x - use temporary for &client->dev Input: drv260x - fix input device's parent assignment Input: synaptics-rmi4 - add support for F34 V7 bootloader Input: drv260x - fix initializing overdrive voltage Input: ALPS - fix protcol -> protocol Input: i8042 - comment #else/#endif of CONFIG_PNP Input: lpc32xx-keys - fix invalid error handling of a requested irq Input: synaptics-rmi4 - fix debug for sensor clip Input: synaptics-rmi4 - store the attn data in the driver Input: synaptics-rmi4 - allow to add attention data Input: synaptics-rmi4 - f03 - grab data passed by transport device Input: synaptics-rmi4 - add support for F03 Input: imx6ul_tsc - convert int to u32 Input: imx6ul_tsc - add mask when set REG_ADC_CFG Input: synaptics-rmi4 - have only one struct platform data Input: synaptics-rmi4 - remove EXPORT_SYMBOL_GPL for internal functions Input: synaptics-rmi4 - remove mutex calls while updating the firmware Input: drv2667 - fix misuse of regmap_update_bits ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2016-12-17 16:45:00 -0800
committer: Linus Torvalds <torvalds@linux-foundation.org> 2016-12-17 16:45:00 -0800
commit: af79ce47efabba36d1db0902d46a80de7f251411 (patch)
tree: 571106db25ed2da54891995aed38407f85e6ac4b /drivers/input/rmi4
parent: c07dee7348e2451bcf2f178bf0e7830268e2c31a (diff)
parent: f26e8817b235d8764363bffcc9cbfc61867371f2 (diff)
21 files changed, 3686 insertions, 320 deletions
diff --git a/drivers/input/rmi4/Kconfig b/drivers/input/rmi4/Kconfig
index 4c8a55857e00..30cc627a4f45 100644
--- a/drivers/input/rmi4/Kconfig
+++ b/drivers/input/rmi4/Kconfig
@@ -27,6 +27,27 @@ config RMI4_SPI
 
 	  If unsure, say N.
 
+config RMI4_SMB
+	tristate "RMI4 SMB Support"
+	depends on RMI4_CORE && I2C
+	help
+	  Say Y here if you want to support RMI4 devices connected to an SMB
+	  bus.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called rmi_smbus.
+
+config RMI4_F03
+        bool "RMI4 Function 03 (PS2 Guest)"
+        depends on RMI4_CORE && SERIO
+        help
+          Say Y here if you want to add support for RMI4 function 03.
+
+          Function 03 provides PS2 guest support for RMI4 devices. This
+          includes support for TrackPoints on TouchPads.
+
 config RMI4_2D_SENSOR
 	bool
 	depends on RMI4_CORE
@@ -62,13 +83,34 @@ config RMI4_F30
 	  Function 30 provides GPIO and LED support for RMI4 devices. This
 	  includes support for buttons on TouchPads and ClickPads.
 
+config RMI4_F34
+	bool "RMI4 Function 34 (Device reflash)"
+	depends on RMI4_CORE
+	select FW_LOADER
+	help
+	  Say Y here if you want to add support for RMI4 function 34.
+
+	  Function 34 provides support for upgrading the firmware on the RMI4
+	  device via the firmware loader interface. This is triggered using a
+	  sysfs attribute.
+
 config RMI4_F54
 	bool "RMI4 Function 54 (Analog diagnostics)"
 	depends on RMI4_CORE
 	depends on VIDEO_V4L2=y || (RMI4_CORE=m && VIDEO_V4L2=m)
 	select VIDEOBUF2_VMALLOC
+	select RMI4_F55
 	help
 	  Say Y here if you want to add support for RMI4 function 54
 
 	  Function 54 provides access to various diagnostic features in certain
 	  RMI4 touch sensors.
+
+config RMI4_F55
+	bool "RMI4 Function 55 (Sensor tuning)"
+	depends on RMI4_CORE
+	help
+	  Say Y here if you want to add support for RMI4 function 55
+
+	  Function 55 provides access to the RMI4 touch sensor tuning
+	  mechanism.
diff --git a/drivers/input/rmi4/Makefile b/drivers/input/rmi4/Makefile
index 0bafc8502c4b..9aaac3dd8613 100644
--- a/drivers/input/rmi4/Makefile
+++ b/drivers/input/rmi4/Makefile
@@ -4,11 +4,15 @@ rmi_core-y := rmi_bus.o rmi_driver.o rmi_f01.o
 rmi_core-$(CONFIG_RMI4_2D_SENSOR) += rmi_2d_sensor.o
 
 # Function drivers
+rmi_core-$(CONFIG_RMI4_F03) += rmi_f03.o
 rmi_core-$(CONFIG_RMI4_F11) += rmi_f11.o
 rmi_core-$(CONFIG_RMI4_F12) += rmi_f12.o
 rmi_core-$(CONFIG_RMI4_F30) += rmi_f30.o
+rmi_core-$(CONFIG_RMI4_F34) += rmi_f34.o rmi_f34v7.o
 rmi_core-$(CONFIG_RMI4_F54) += rmi_f54.o
+rmi_core-$(CONFIG_RMI4_F55) += rmi_f55.o
 
 # Transports
 obj-$(CONFIG_RMI4_I2C) += rmi_i2c.o
 obj-$(CONFIG_RMI4_SPI) += rmi_spi.o
+obj-$(CONFIG_RMI4_SMB) += rmi_smbus.o
diff --git a/drivers/input/rmi4/rmi_2d_sensor.c b/drivers/input/rmi4/rmi_2d_sensor.c
index e97bd7fabccc..07007ff8e29f 100644
--- a/drivers/input/rmi4/rmi_2d_sensor.c
+++ b/drivers/input/rmi4/rmi_2d_sensor.c
@@ -177,10 +177,12 @@ static void rmi_2d_sensor_set_input_params(struct rmi_2d_sensor *sensor)
 				sensor->dmax = DMAX * res_x;
 		}
 
-		input_set_abs_params(input, ABS_MT_PRESSURE, 0,	0xff, 0, 0);
-		input_set_abs_params(input, ABS_MT_TOUCH_MAJOR,	0, 0x0f, 0, 0);
-		input_set_abs_params(input, ABS_MT_TOUCH_MINOR,	0, 0x0f, 0, 0);
-		input_set_abs_params(input, ABS_MT_ORIENTATION,	0, 1, 0, 0);
+		input_set_abs_params(input, ABS_MT_PRESSURE, 0, 0xff, 0, 0);
+		input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 0x0f, 0, 0);
+		input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 0x0f, 0, 0);
+		input_set_abs_params(input, ABS_MT_ORIENTATION, 0, 1, 0, 0);
+		input_set_abs_params(input, ABS_MT_TOOL_TYPE,
+				     0, MT_TOOL_MAX, 0, 0);
 
 		if (sensor->sensor_type == rmi_sensor_touchpad)
 			input_flags = INPUT_MT_POINTER;
diff --git a/drivers/input/rmi4/rmi_2d_sensor.h b/drivers/input/rmi4/rmi_2d_sensor.h
index 77fcdfef003c..c871bef4dac0 100644
--- a/drivers/input/rmi4/rmi_2d_sensor.h
+++ b/drivers/input/rmi4/rmi_2d_sensor.h
@@ -67,6 +67,8 @@ struct rmi_2d_sensor {
 	u8 report_rel;
 	u8 x_mm;
 	u8 y_mm;
+	enum rmi_reg_state dribble;
+	enum rmi_reg_state palm_detect;
 };
 
 int rmi_2d_sensor_of_probe(struct device *dev,
diff --git a/drivers/input/rmi4/rmi_bus.c b/drivers/input/rmi4/rmi_bus.c
index ef8c747c35e7..1c40d94ca506 100644
--- a/drivers/input/rmi4/rmi_bus.c
+++ b/drivers/input/rmi4/rmi_bus.c
@@ -230,6 +230,9 @@ err_put_device:
 
 void rmi_unregister_function(struct rmi_function *fn)
 {
+	rmi_dbg(RMI_DEBUG_CORE, &fn->dev, "Unregistering F%02X.\n",
+			fn->fd.function_number);
+
 	device_del(&fn->dev);
 	of_node_put(fn->dev.of_node);
 	put_device(&fn->dev);
@@ -302,6 +305,9 @@ struct bus_type rmi_bus_type = {
 
 static struct rmi_function_handler *fn_handlers[] = {
 	&rmi_f01_handler,
+#ifdef CONFIG_RMI4_F03
+	&rmi_f03_handler,
+#endif
 #ifdef CONFIG_RMI4_F11
 	&rmi_f11_handler,
 #endif
@@ -311,9 +317,15 @@ static struct rmi_function_handler *fn_handlers[] = {
 #ifdef CONFIG_RMI4_F30
 	&rmi_f30_handler,
 #endif
+#ifdef CONFIG_RMI4_F34
+	&rmi_f34_handler,
+#endif
 #ifdef CONFIG_RMI4_F54
 	&rmi_f54_handler,
 #endif
+#ifdef CONFIG_RMI4_F55
+	&rmi_f55_handler,
+#endif
 };
 
 static void __rmi_unregister_function_handlers(int start_idx)
diff --git a/drivers/input/rmi4/rmi_bus.h b/drivers/input/rmi4/rmi_bus.h
index 899579830536..b7625a9ac66a 100644
--- a/drivers/input/rmi4/rmi_bus.h
+++ b/drivers/input/rmi4/rmi_bus.h
@@ -105,6 +105,18 @@ rmi_get_platform_data(struct rmi_device *d)
 bool rmi_is_physical_device(struct device *dev);
 
 /**
+ * rmi_reset - reset a RMI4 device
+ * @d: Pointer to an RMI device
+ *
+ * Calls for a reset of each function implemented by a specific device.
+ * Returns 0 on success or a negative error code.
+ */
+static inline int rmi_reset(struct rmi_device *d)
+{
+	return d->driver->reset_handler(d);
+}
+
+/**
  * rmi_read - read a single byte
  * @d: Pointer to an RMI device
  * @addr: The address to read from
diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c
index 4a88312fbd25..11447ab1055c 100644
--- a/drivers/input/rmi4/rmi_driver.c
+++ b/drivers/input/rmi4/rmi_driver.c
@@ -17,6 +17,7 @@
 #include <linux/bitmap.h>
 #include <linux/delay.h>
 #include <linux/fs.h>
+#include <linux/irq.h>
 #include <linux/pm.h>
 #include <linux/slab.h>
 #include <linux/of.h>
@@ -33,12 +34,22 @@
 #define RMI_DEVICE_RESET_CMD	0x01
 #define DEFAULT_RESET_DELAY_MS	100
 
-static void rmi_free_function_list(struct rmi_device *rmi_dev)
+void rmi_free_function_list(struct rmi_device *rmi_dev)
 {
 	struct rmi_function *fn, *tmp;
 	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 
+	rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev, "Freeing function list\n");
+
+	devm_kfree(&rmi_dev->dev, data->irq_memory);
+	data->irq_memory = NULL;
+	data->irq_status = NULL;
+	data->fn_irq_bits = NULL;
+	data->current_irq_mask = NULL;
+	data->new_irq_mask = NULL;
+
 	data->f01_container = NULL;
+	data->f34_container = NULL;
 
 	/* Doing it in the reverse order so F01 will be removed last */
 	list_for_each_entry_safe_reverse(fn, tmp,
@@ -133,7 +144,7 @@ static void process_one_interrupt(struct rmi_driver_data *data,
 	}
 }
 
-int rmi_process_interrupt_requests(struct rmi_device *rmi_dev)
+static int rmi_process_interrupt_requests(struct rmi_device *rmi_dev)
 {
 	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 	struct device *dev = &rmi_dev->dev;
@@ -143,7 +154,7 @@ int rmi_process_interrupt_requests(struct rmi_device *rmi_dev)
 	if (!data)
 		return 0;
 
-	if (!rmi_dev->xport->attn_data) {
+	if (!data->attn_data.data) {
 		error = rmi_read_block(rmi_dev,
 				data->f01_container->fd.data_base_addr + 1,
 				data->irq_status, data->num_of_irq_regs);
@@ -178,7 +189,81 @@ int rmi_process_interrupt_requests(struct rmi_device *rmi_dev)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(rmi_process_interrupt_requests);
+
+void rmi_set_attn_data(struct rmi_device *rmi_dev, unsigned long irq_status,
+		       void *data, size_t size)
+{
+	struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
+	struct rmi4_attn_data attn_data;
+	void *fifo_data;
+
+	if (!drvdata->enabled)
+		return;
+
+	fifo_data = kmemdup(data, size, GFP_ATOMIC);
+	if (!fifo_data)
+		return;
+
+	attn_data.irq_status = irq_status;
+	attn_data.size = size;
+	attn_data.data = fifo_data;
+
+	kfifo_put(&drvdata->attn_fifo, attn_data);
+}
+EXPORT_SYMBOL_GPL(rmi_set_attn_data);
+
+static irqreturn_t rmi_irq_fn(int irq, void *dev_id)
+{
+	struct rmi_device *rmi_dev = dev_id;
+	struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
+	struct rmi4_attn_data attn_data = {0};
+	int ret, count;
+
+	count = kfifo_get(&drvdata->attn_fifo, &attn_data);
+	if (count) {
+		*(drvdata->irq_status) = attn_data.irq_status;
+		drvdata->attn_data = attn_data;
+	}
+
+	ret = rmi_process_interrupt_requests(rmi_dev);
+	if (ret)
+		rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev,
+			"Failed to process interrupt request: %d\n", ret);
+
+	if (count)
+		kfree(attn_data.data);
+
+	if (!kfifo_is_empty(&drvdata->attn_fifo))
+		return rmi_irq_fn(irq, dev_id);
+
+	return IRQ_HANDLED;
+}
+
+static int rmi_irq_init(struct rmi_device *rmi_dev)
+{
+	struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	int irq_flags = irq_get_trigger_type(pdata->irq);
+	int ret;
+
+	if (!irq_flags)
+		irq_flags = IRQF_TRIGGER_LOW;
+
+	ret = devm_request_threaded_irq(&rmi_dev->dev, pdata->irq, NULL,
+					rmi_irq_fn, irq_flags | IRQF_ONESHOT,
+					dev_name(rmi_dev->xport->dev),
+					rmi_dev);
+	if (ret < 0) {
+		dev_err(&rmi_dev->dev, "Failed to register interrupt %d\n",
+			pdata->irq);
+
+		return ret;
+	}
+
+	data->enabled = true;
+
+	return 0;
+}
 
 static int suspend_one_function(struct rmi_function *fn)
 {
@@ -248,7 +333,7 @@ static int rmi_resume_functions(struct rmi_device *rmi_dev)
 	return 0;
 }
 
-static int enable_sensor(struct rmi_device *rmi_dev)
+int rmi_enable_sensor(struct rmi_device *rmi_dev)
 {
 	int retval = 0;
 
@@ -379,8 +464,8 @@ static int rmi_driver_reset_handler(struct rmi_device *rmi_dev)
 	return 0;
 }
 
-int rmi_read_pdt_entry(struct rmi_device *rmi_dev, struct pdt_entry *entry,
-			u16 pdt_address)
+static int rmi_read_pdt_entry(struct rmi_device *rmi_dev,
+			      struct pdt_entry *entry, u16 pdt_address)
 {
 	u8 buf[RMI_PDT_ENTRY_SIZE];
 	int error;
@@ -403,7 +488,6 @@ int rmi_read_pdt_entry(struct rmi_device *rmi_dev, struct pdt_entry *entry,
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(rmi_read_pdt_entry);
 
 static void rmi_driver_copy_pdt_to_fd(const struct pdt_entry *pdt,
 				      struct rmi_function_descriptor *fd)
@@ -422,6 +506,7 @@ static void rmi_driver_copy_pdt_to_fd(const struct pdt_entry *pdt,
 
 static int rmi_scan_pdt_page(struct rmi_device *rmi_dev,
 			     int page,
+			     int *empty_pages,
 			     void *ctx,
 			     int (*callback)(struct rmi_device *rmi_dev,
 					     void *ctx,
@@ -449,20 +534,30 @@ static int rmi_scan_pdt_page(struct rmi_device *rmi_dev,
 			return retval;
 	}
 
-	return (data->f01_bootloader_mode || addr == pdt_start) ?
+	/*
+	 * Count number of empty PDT pages. If a gap of two pages
+	 * or more is found, stop scanning.
+	 */
+	if (addr == pdt_start)
+		++*empty_pages;
+	else
+		*empty_pages = 0;
+
+	return (data->bootloader_mode || *empty_pages >= 2) ?
 					RMI_SCAN_DONE : RMI_SCAN_CONTINUE;
 }
 
-static int rmi_scan_pdt(struct rmi_device *rmi_dev, void *ctx,
-			int (*callback)(struct rmi_device *rmi_dev,
-					void *ctx,
-					const struct pdt_entry *entry))
+int rmi_scan_pdt(struct rmi_device *rmi_dev, void *ctx,
+		 int (*callback)(struct rmi_device *rmi_dev,
+		 void *ctx, const struct pdt_entry *entry))
 {
 	int page;
+	int empty_pages = 0;
 	int retval = RMI_SCAN_DONE;
 
 	for (page = 0; page <= RMI4_MAX_PAGE; page++) {
-		retval = rmi_scan_pdt_page(rmi_dev, page, ctx, callback);
+		retval = rmi_scan_pdt_page(rmi_dev, page, &empty_pages,
+					   ctx, callback);
 		if (retval != RMI_SCAN_CONTINUE)
 			break;
 	}
@@ -600,7 +695,6 @@ free_struct_buff:
 	kfree(struct_buf);
 	return ret;
 }
-EXPORT_SYMBOL_GPL(rmi_read_register_desc);
 
 const struct rmi_register_desc_item *rmi_get_register_desc_item(
 				struct rmi_register_descriptor *rdesc, u16 reg)
@@ -616,7 +710,6 @@ const struct rmi_register_desc_item *rmi_get_register_desc_item(
 
 	return NULL;
 }
-EXPORT_SYMBOL_GPL(rmi_get_register_desc_item);
 
 size_t rmi_register_desc_calc_size(struct rmi_register_descriptor *rdesc)
 {
@@ -630,7 +723,6 @@ size_t rmi_register_desc_calc_size(struct rmi_register_descriptor *rdesc)
 	}
 	return size;
 }
-EXPORT_SYMBOL_GPL(rmi_register_desc_calc_size);
 
 /* Compute the register offset relative to the base address */
 int rmi_register_desc_calc_reg_offset(
@@ -648,7 +740,6 @@ int rmi_register_desc_calc_reg_offset(
 	}
 	return -1;
 }
-EXPORT_SYMBOL_GPL(rmi_register_desc_calc_reg_offset);
 
 bool rmi_register_desc_has_subpacket(const struct rmi_register_desc_item *item,
 	u8 subpacket)
@@ -657,51 +748,55 @@ bool rmi_register_desc_has_subpacket(const struct rmi_register_desc_item *item,
 				subpacket) == subpacket;
 }
 
-/* Indicates that flash programming is enabled (bootloader mode). */
-#define RMI_F01_STATUS_BOOTLOADER(status)	(!!((status) & 0x40))
-
-/*
- * Given the PDT entry for F01, read the device status register to determine
- * if we're stuck in bootloader mode or not.
- *
- */
 static int rmi_check_bootloader_mode(struct rmi_device *rmi_dev,
 				     const struct pdt_entry *pdt)
 {
-	int error;
-	u8 device_status;
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	int ret;
+	u8 status;
 
-	error = rmi_read(rmi_dev, pdt->data_base_addr + pdt->page_start,
-			 &device_status);
-	if (error) {
-		dev_err(&rmi_dev->dev,
-			"Failed to read device status: %d.\n", error);
-		return error;
+	if (pdt->function_number == 0x34 && pdt->function_version > 1) {
+		ret = rmi_read(rmi_dev, pdt->data_base_addr, &status);
+		if (ret) {
+			dev_err(&rmi_dev->dev,
+				"Failed to read F34 status: %d.\n", ret);
+			return ret;
+		}
+
+		if (status & BIT(7))
+			data->bootloader_mode = true;
+	} else if (pdt->function_number == 0x01) {
+		ret = rmi_read(rmi_dev, pdt->data_base_addr, &status);
+		if (ret) {
+			dev_err(&rmi_dev->dev,
+				"Failed to read F01 status: %d.\n", ret);
+			return ret;
+		}
+
+		if (status & BIT(6))
+			data->bootloader_mode = true;
 	}
 
-	return RMI_F01_STATUS_BOOTLOADER(device_status);
+	return 0;
 }
 
 static int rmi_count_irqs(struct rmi_device *rmi_dev,
 			 void *ctx, const struct pdt_entry *pdt)
 {
-	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 	int *irq_count = ctx;
+	int ret;
 
 	*irq_count += pdt->interrupt_source_count;
-	if (pdt->function_number == 0x01) {
-		data->f01_bootloader_mode =
-			rmi_check_bootloader_mode(rmi_dev, pdt);
-		if (data->f01_bootloader_mode)
-			dev_warn(&rmi_dev->dev,
-				"WARNING: RMI4 device is in bootloader mode!\n");
-	}
+
+	ret = rmi_check_bootloader_mode(rmi_dev, pdt);
+	if (ret < 0)
+		return ret;
 
 	return RMI_SCAN_CONTINUE;
 }
 
-static int rmi_initial_reset(struct rmi_device *rmi_dev,
-			     void *ctx, const struct pdt_entry *pdt)
+int rmi_initial_reset(struct rmi_device *rmi_dev, void *ctx,
+		      const struct pdt_entry *pdt)
 {
 	int error;
 
@@ -720,6 +815,7 @@ static int rmi_initial_reset(struct rmi_device *rmi_dev,
 			return RMI_SCAN_DONE;
 		}
 
+		rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev, "Sending reset\n");
 		error = rmi_write_block(rmi_dev, cmd_addr, &cmd_buf, 1);
 		if (error) {
 			dev_err(&rmi_dev->dev,
@@ -776,6 +872,8 @@ static int rmi_create_function(struct rmi_device *rmi_dev,
 
 	if (pdt->function_number == 0x01)
 		data->f01_container = fn;
+	else if (pdt->function_number == 0x34)
+		data->f34_container = fn;
 
 	list_add_tail(&fn->node, &data->function_list);
 
@@ -786,23 +884,95 @@ err_put_fn:
 	return error;
 }
 
-int rmi_driver_suspend(struct rmi_device *rmi_dev)
+void rmi_enable_irq(struct rmi_device *rmi_dev, bool clear_wake)
 {
-	int retval = 0;
+	struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	int irq = pdata->irq;
+	int irq_flags;
+	int retval;
+
+	mutex_lock(&data->enabled_mutex);
+
+	if (data->enabled)
+		goto out;
+
+	enable_irq(irq);
+	data->enabled = true;
+	if (clear_wake && device_may_wakeup(rmi_dev->xport->dev)) {
+		retval = disable_irq_wake(irq);
+		if (!retval)
+			dev_warn(&rmi_dev->dev,
+				 "Failed to disable irq for wake: %d\n",
+				 retval);
+	}
+
+	/*
+	 * Call rmi_process_interrupt_requests() after enabling irq,
+	 * otherwise we may lose interrupt on edge-triggered systems.
+	 */
+	irq_flags = irq_get_trigger_type(pdata->irq);
+	if (irq_flags & IRQ_TYPE_EDGE_BOTH)
+		rmi_process_interrupt_requests(rmi_dev);
+
+out:
+	mutex_unlock(&data->enabled_mutex);
+}
+
+void rmi_disable_irq(struct rmi_device *rmi_dev, bool enable_wake)
+{
+	struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	struct rmi4_attn_data attn_data = {0};
+	int irq = pdata->irq;
+	int retval, count;
+
+	mutex_lock(&data->enabled_mutex);
+
+	if (!data->enabled)
+		goto out;
+
+	data->enabled = false;
+	disable_irq(irq);
+	if (enable_wake && device_may_wakeup(rmi_dev->xport->dev)) {
+		retval = enable_irq_wake(irq);
+		if (!retval)
+			dev_warn(&rmi_dev->dev,
+				 "Failed to enable irq for wake: %d\n",
+				 retval);
+	}
+
+	/* make sure the fifo is clean */
+	while (!kfifo_is_empty(&data->attn_fifo)) {
+		count = kfifo_get(&data->attn_fifo, &attn_data);
+		if (count)
+			kfree(attn_data.data);
+	}
+
+out:
+	mutex_unlock(&data->enabled_mutex);
+}
+
+int rmi_driver_suspend(struct rmi_device *rmi_dev, bool enable_wake)
+{
+	int retval;
 
 	retval = rmi_suspend_functions(rmi_dev);
 	if (retval)
 		dev_warn(&rmi_dev->dev, "Failed to suspend functions: %d\n",
 			retval);
 
+	rmi_disable_irq(rmi_dev, enable_wake);
 	return retval;
 }
 EXPORT_SYMBOL_GPL(rmi_driver_suspend);
 
-int rmi_driver_resume(struct rmi_device *rmi_dev)
+int rmi_driver_resume(struct rmi_device *rmi_dev, bool clear_wake)
 {
 	int retval;
 
+	rmi_enable_irq(rmi_dev, clear_wake);
+
 	retval = rmi_resume_functions(rmi_dev);
 	if (retval)
 		dev_warn(&rmi_dev->dev, "Failed to suspend functions: %d\n",
@@ -816,6 +986,9 @@ static int rmi_driver_remove(struct device *dev)
 {
 	struct rmi_device *rmi_dev = to_rmi_device(dev);
 
+	rmi_disable_irq(rmi_dev, false);
+
+	rmi_f34_remove_sysfs(rmi_dev);
 	rmi_free_function_list(rmi_dev);
 
 	return 0;
@@ -842,15 +1015,95 @@ static inline int rmi_driver_of_probe(struct device *dev,
 }
 #endif
 
+int rmi_probe_interrupts(struct rmi_driver_data *data)
+{
+	struct rmi_device *rmi_dev = data->rmi_dev;
+	struct device *dev = &rmi_dev->dev;
+	int irq_count;
+	size_t size;
+	int retval;
+
+	/*
+	 * We need to count the IRQs and allocate their storage before scanning
+	 * the PDT and creating the function entries, because adding a new
+	 * function can trigger events that result in the IRQ related storage
+	 * being accessed.
+	 */
+	rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Counting IRQs.\n", __func__);
+	irq_count = 0;
+	data->bootloader_mode = false;
+
+	retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_count_irqs);
+	if (retval < 0) {
+		dev_err(dev, "IRQ counting failed with code %d.\n", retval);
+		return retval;
+	}
+
+	if (data->bootloader_mode)
+		dev_warn(&rmi_dev->dev, "Device in bootloader mode.\n");
+
+	data->irq_count = irq_count;
+	data->num_of_irq_regs = (data->irq_count + 7) / 8;
+
+	size = BITS_TO_LONGS(data->irq_count) * sizeof(unsigned long);
+	data->irq_memory = devm_kzalloc(dev, size * 4, GFP_KERNEL);
+	if (!data->irq_memory) {
+		dev_err(dev, "Failed to allocate memory for irq masks.\n");
+		return retval;
+	}
+
+	data->irq_status	= data->irq_memory + size * 0;
+	data->fn_irq_bits	= data->irq_memory + size * 1;
+	data->current_irq_mask	= data->irq_memory + size * 2;
+	data->new_irq_mask	= data->irq_memory + size * 3;
+
+	return retval;
+}
+
+int rmi_init_functions(struct rmi_driver_data *data)
+{
+	struct rmi_device *rmi_dev = data->rmi_dev;
+	struct device *dev = &rmi_dev->dev;
+	int irq_count;
+	int retval;
+
+	irq_count = 0;
+	rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Creating functions.\n", __func__);
+	retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_create_function);
+	if (retval < 0) {
+		dev_err(dev, "Function creation failed with code %d.\n",
+			retval);
+		goto err_destroy_functions;
+	}
+
+	if (!data->f01_container) {
+		dev_err(dev, "Missing F01 container!\n");
+		retval = -EINVAL;
+		goto err_destroy_functions;
+	}
+
+	retval = rmi_read_block(rmi_dev,
+				data->f01_container->fd.control_base_addr + 1,
+				data->current_irq_mask, data->num_of_irq_regs);
+	if (retval < 0) {
+		dev_err(dev, "%s: Failed to read current IRQ mask.\n",
+			__func__);
+		goto err_destroy_functions;
+	}
+
+	return 0;
+
+err_destroy_functions:
+	rmi_free_function_list(rmi_dev);
+	return retval;
+}
+
 static int rmi_driver_probe(struct device *dev)
 {
 	struct rmi_driver *rmi_driver;
 	struct rmi_driver_data *data;
 	struct rmi_device_platform_data *pdata;
 	struct rmi_device *rmi_dev;
-	size_t size;
-	void *irq_memory;
-	int irq_count;
 	int retval;
 
 	rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Starting probe.\n",
@@ -916,35 +1169,12 @@ static int rmi_driver_probe(struct device *dev)
 			 PDT_PROPERTIES_LOCATION, retval);
 	}
 
-	/*
-	 * We need to count the IRQs and allocate their storage before scanning
-	 * the PDT and creating the function entries, because adding a new
-	 * function can trigger events that result in the IRQ related storage
-	 * being accessed.
-	 */
-	rmi_dbg(RMI_DEBUG_CORE, dev, "Counting IRQs.\n");
-	irq_count = 0;
-	retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_count_irqs);
-	if (retval < 0) {
-		dev_err(dev, "IRQ counting failed with code %d.\n", retval);
-		goto err;
-	}
-	data->irq_count = irq_count;
-	data->num_of_irq_regs = (data->irq_count + 7) / 8;
-
 	mutex_init(&data->irq_mutex);
+	mutex_init(&data->enabled_mutex);
 
-	size = BITS_TO_LONGS(data->irq_count) * sizeof(unsigned long);
-	irq_memory = devm_kzalloc(dev, size * 4, GFP_KERNEL);
-	if (!irq_memory) {
-		dev_err(dev, "Failed to allocate memory for irq masks.\n");
+	retval = rmi_probe_interrupts(data);
+	if (retval)
 		goto err;
-	}
-
-	data->irq_status	= irq_memory + size * 0;
-	data->fn_irq_bits	= irq_memory + size * 1;
-	data->current_irq_mask	= irq_memory + size * 2;
-	data->new_irq_mask	= irq_memory + size * 3;
 
 	if (rmi_dev->xport->input) {
 		/*
@@ -961,36 +1191,20 @@ static int rmi_driver_probe(struct device *dev)
 			dev_err(dev, "%s: Failed to allocate input device.\n",
 				__func__);
 			retval = -ENOMEM;
-			goto err_destroy_functions;
+			goto err;
 		}
 		rmi_driver_set_input_params(rmi_dev, data->input);
 		data->input->phys = devm_kasprintf(dev, GFP_KERNEL,
 						"%s/input0", dev_name(dev));
 	}
 
-	irq_count = 0;
-	rmi_dbg(RMI_DEBUG_CORE, dev, "Creating functions.");
-	retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_create_function);
-	if (retval < 0) {
-		dev_err(dev, "Function creation failed with code %d.\n",
-			retval);
-		goto err_destroy_functions;
-	}
-
-	if (!data->f01_container) {
-		dev_err(dev, "Missing F01 container!\n");
-		retval = -EINVAL;
-		goto err_destroy_functions;
-	}
+	retval = rmi_init_functions(data);
+	if (retval)
+		goto err;
 
-	retval = rmi_read_block(rmi_dev,
-				data->f01_container->fd.control_base_addr + 1,
-				data->current_irq_mask, data->num_of_irq_regs);
-	if (retval < 0) {
-		dev_err(dev, "%s: Failed to read current IRQ mask.\n",
-			__func__);
-		goto err_destroy_functions;
-	}
+	retval = rmi_f34_create_sysfs(rmi_dev);
+	if (retval)
+		goto err;
 
 	if (data->input) {
 		rmi_driver_set_input_name(rmi_dev, data->input);
@@ -1003,9 +1217,13 @@ static int rmi_driver_probe(struct device *dev)
 		}
 	}
 
+	retval = rmi_irq_init(rmi_dev);
+	if (retval < 0)
+		goto err_destroy_functions;
+
 	if (data->f01_container->dev.driver)
 		/* Driver already bound, so enable ATTN now. */
-		return enable_sensor(rmi_dev);
+		return rmi_enable_sensor(rmi_dev);
 
 	return 0;
 
diff --git a/drivers/input/rmi4/rmi_driver.h b/drivers/input/rmi4/rmi_driver.h
index 8dfbebe9bf86..24f8f764d171 100644
--- a/drivers/input/rmi4/rmi_driver.h
+++ b/drivers/input/rmi4/rmi_driver.h
@@ -51,9 +51,6 @@ struct pdt_entry {
 	u8 function_number;
 };
 
-int rmi_read_pdt_entry(struct rmi_device *rmi_dev, struct pdt_entry *entry,
-			u16 pdt_address);
-
 #define RMI_REG_DESC_PRESENSE_BITS	(32 * BITS_PER_BYTE)
 #define RMI_REG_DESC_SUBPACKET_BITS	(37 * BITS_PER_BYTE)
 
@@ -95,12 +92,40 @@ bool rmi_register_desc_has_subpacket(const struct rmi_register_desc_item *item,
 bool rmi_is_physical_driver(struct device_driver *);
 int rmi_register_physical_driver(void);
 void rmi_unregister_physical_driver(void);
+void rmi_free_function_list(struct rmi_device *rmi_dev);
+int rmi_enable_sensor(struct rmi_device *rmi_dev);
+int rmi_scan_pdt(struct rmi_device *rmi_dev, void *ctx,
+		 int (*callback)(struct rmi_device *rmi_dev, void *ctx,
+		 const struct pdt_entry *entry));
+int rmi_probe_interrupts(struct rmi_driver_data *data);
+void rmi_enable_irq(struct rmi_device *rmi_dev, bool clear_wake);
+void rmi_disable_irq(struct rmi_device *rmi_dev, bool enable_wake);
+int rmi_init_functions(struct rmi_driver_data *data);
+int rmi_initial_reset(struct rmi_device *rmi_dev, void *ctx,
+		      const struct pdt_entry *pdt);
 
 char *rmi_f01_get_product_ID(struct rmi_function *fn);
 
+#ifdef CONFIG_RMI4_F34
+int rmi_f34_create_sysfs(struct rmi_device *rmi_dev);
+void rmi_f34_remove_sysfs(struct rmi_device *rmi_dev);
+#else
+static inline int rmi_f34_create_sysfs(struct rmi_device *rmi_dev)
+{
+	return 0;
+}
+
+static inline void rmi_f34_remove_sysfs(struct rmi_device *rmi_dev)
+{
+}
+#endif /* CONFIG_RMI_F34 */
+
 extern struct rmi_function_handler rmi_f01_handler;
+extern struct rmi_function_handler rmi_f03_handler;
 extern struct rmi_function_handler rmi_f11_handler;
 extern struct rmi_function_handler rmi_f12_handler;
 extern struct rmi_function_handler rmi_f30_handler;
+extern struct rmi_function_handler rmi_f34_handler;
 extern struct rmi_function_handler rmi_f54_handler;
+extern struct rmi_function_handler rmi_f55_handler;
 #endif
diff --git a/drivers/input/rmi4/rmi_f01.c b/drivers/input/rmi4/rmi_f01.c
index b5d2dfc23bad..18baf4ceb940 100644
--- a/drivers/input/rmi4/rmi_f01.c
+++ b/drivers/input/rmi4/rmi_f01.c
@@ -62,6 +62,8 @@ struct f01_basic_properties {
 #define RMI_F01_STATUS_CODE(status)		((status) & 0x0f)
 /* The device has lost its configuration for some reason. */
 #define RMI_F01_STATUS_UNCONFIGURED(status)	(!!((status) & 0x80))
+/* The device is in bootloader mode */
+#define RMI_F01_STATUS_BOOTLOADER(status)	((status) & 0x40)
 
 /* Control register bits */
 
@@ -326,12 +328,12 @@ static int rmi_f01_probe(struct rmi_function *fn)
 	}
 
 	switch (pdata->power_management.nosleep) {
-	case RMI_F01_NOSLEEP_DEFAULT:
+	case RMI_REG_STATE_DEFAULT:
 		break;
-	case RMI_F01_NOSLEEP_OFF:
+	case RMI_REG_STATE_OFF:
 		f01->device_control.ctrl0 &= ~RMI_F01_CTRL0_NOSLEEP_BIT;
 		break;
-	case RMI_F01_NOSLEEP_ON:
+	case RMI_REG_STATE_ON:
 		f01->device_control.ctrl0 |= RMI_F01_CTRL0_NOSLEEP_BIT;
 		break;
 	}
@@ -593,6 +595,10 @@ static int rmi_f01_attention(struct rmi_function *fn,
 		return error;
 	}
 
+	if (RMI_F01_STATUS_BOOTLOADER(device_status))
+		dev_warn(&fn->dev,
+			 "Device in bootloader mode, please update firmware\n");
+
 	if (RMI_F01_STATUS_UNCONFIGURED(device_status)) {
 		dev_warn(&fn->dev, "Device reset detected.\n");
 		error = rmi_dev->driver->reset_handler(rmi_dev);
diff --git a/drivers/input/rmi4/rmi_f03.c b/drivers/input/rmi4/rmi_f03.c
new file mode 100644
index 000000000000..8a7ca3e2f95e
--- /dev/null
+++ b/drivers/input/rmi4/rmi_f03.c
@@ -0,0 +1,250 @@
+/*
+ * Copyright (C) 2015-2016 Red Hat
+ * Copyright (C) 2015 Lyude Paul <thatslyude@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/serio.h>
+#include <linux/notifier.h>
+#include "rmi_driver.h"
+
+#define RMI_F03_RX_DATA_OFB		0x01
+#define RMI_F03_OB_SIZE			2
+
+#define RMI_F03_OB_OFFSET		2
+#define RMI_F03_OB_DATA_OFFSET		1
+#define RMI_F03_OB_FLAG_TIMEOUT		BIT(6)
+#define RMI_F03_OB_FLAG_PARITY		BIT(7)
+
+#define RMI_F03_DEVICE_COUNT		0x07
+#define RMI_F03_BYTES_PER_DEVICE	0x07
+#define RMI_F03_BYTES_PER_DEVICE_SHIFT	4
+#define RMI_F03_QUEUE_LENGTH		0x0F
+
+struct f03_data {
+	struct rmi_function *fn;
+
+	struct serio *serio;
+
+	u8 device_count;
+	u8 rx_queue_length;
+};
+
+static int rmi_f03_pt_write(struct serio *id, unsigned char val)
+{
+	struct f03_data *f03 = id->port_data;
+	int error;
+
+	rmi_dbg(RMI_DEBUG_FN, &f03->fn->dev,
+		"%s: Wrote %.2hhx to PS/2 passthrough address",
+		__func__, val);
+
+	error = rmi_write(f03->fn->rmi_dev, f03->fn->fd.data_base_addr, val);
+	if (error) {
+		dev_err(&f03->fn->dev,
+			"%s: Failed to write to F03 TX register (%d).\n",
+			__func__, error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int rmi_f03_initialize(struct f03_data *f03)
+{
+	struct rmi_function *fn = f03->fn;
+	struct device *dev = &fn->dev;
+	int error;
+	u8 bytes_per_device;
+	u8 query1;
+	u8 query2[RMI_F03_DEVICE_COUNT * RMI_F03_BYTES_PER_DEVICE];
+	size_t query2_len;
+
+	error = rmi_read(fn->rmi_dev, fn->fd.query_base_addr, &query1);
+	if (error) {
+		dev_err(dev, "Failed to read query register (%d).\n", error);
+		return error;
+	}
+
+	f03->device_count = query1 & RMI_F03_DEVICE_COUNT;
+	bytes_per_device = (query1 >> RMI_F03_BYTES_PER_DEVICE_SHIFT) &
+				RMI_F03_BYTES_PER_DEVICE;
+
+	query2_len = f03->device_count * bytes_per_device;
+
+	/*
+	 * The first generation of image sensors don't have a second part to
+	 * their f03 query, as such we have to set some of these values manually
+	 */
+	if (query2_len < 1) {
+		f03->device_count = 1;
+		f03->rx_queue_length = 7;
+	} else {
+		error = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr + 1,
+				       query2, query2_len);
+		if (error) {
+			dev_err(dev,
+				"Failed to read second set of query registers (%d).\n",
+				error);
+			return error;
+		}
+
+		f03->rx_queue_length = query2[0] & RMI_F03_QUEUE_LENGTH;
+	}
+
+	return 0;
+}
+
+static int rmi_f03_register_pt(struct f03_data *f03)
+{
+	struct serio *serio;
+
+	serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
+	if (!serio)
+		return -ENOMEM;
+
+	serio->id.type = SERIO_8042;
+	serio->write = rmi_f03_pt_write;
+	serio->port_data = f03;
+
+	strlcpy(serio->name, "Synaptics RMI4 PS/2 pass-through",
+		sizeof(serio->name));
+	strlcpy(serio->phys, "synaptics-rmi4-pt/serio1",
+		sizeof(serio->phys));
+	serio->dev.parent = &f03->fn->dev;
+
+	f03->serio = serio;
+
+	serio_register_port(serio);
+
+	return 0;
+}
+
+static int rmi_f03_probe(struct rmi_function *fn)
+{
+	struct device *dev = &fn->dev;
+	struct f03_data *f03;
+	int error;
+
+	f03 = devm_kzalloc(dev, sizeof(struct f03_data), GFP_KERNEL);
+	if (!f03)
+		return -ENOMEM;
+
+	f03->fn = fn;
+
+	error = rmi_f03_initialize(f03);
+	if (error < 0)
+		return error;
+
+	if (f03->device_count != 1)
+		dev_warn(dev, "found %d devices on PS/2 passthrough",
+			 f03->device_count);
+
+	dev_set_drvdata(dev, f03);
+
+	error = rmi_f03_register_pt(f03);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static int rmi_f03_config(struct rmi_function *fn)
+{
+	fn->rmi_dev->driver->set_irq_bits(fn->rmi_dev, fn->irq_mask);
+
+	return 0;
+}
+
+static int rmi_f03_attention(struct rmi_function *fn, unsigned long *irq_bits)
+{
+	struct rmi_device *rmi_dev = fn->rmi_dev;
+	struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
+	struct f03_data *f03 = dev_get_drvdata(&fn->dev);
+	u16 data_addr = fn->fd.data_base_addr;
+	const u8 ob_len = f03->rx_queue_length * RMI_F03_OB_SIZE;
+	u8 obs[RMI_F03_QUEUE_LENGTH * RMI_F03_OB_SIZE];
+	u8 ob_status;
+	u8 ob_data;
+	unsigned int serio_flags;
+	int i;
+	int error;
+
+	if (!rmi_dev)
+		return -ENODEV;
+
+	if (drvdata->attn_data.data) {
+		/* First grab the data passed by the transport device */
+		if (drvdata->attn_data.size < ob_len) {
+			dev_warn(&fn->dev, "F03 interrupted, but data is missing!\n");
+			return 0;
+		}
+
+		memcpy(obs, drvdata->attn_data.data, ob_len);
+
+		drvdata->attn_data.data += ob_len;
+		drvdata->attn_data.size -= ob_len;
+	} else {
+		/* Grab all of the data registers, and check them for data */
+		error = rmi_read_block(fn->rmi_dev, data_addr + RMI_F03_OB_OFFSET,
+				       &obs, ob_len);
+		if (error) {
+			dev_err(&fn->dev,
+				"%s: Failed to read F03 output buffers: %d\n",
+				__func__, error);
+			serio_interrupt(f03->serio, 0, SERIO_TIMEOUT);
+			return error;
+		}
+	}
+
+	for (i = 0; i < ob_len; i += RMI_F03_OB_SIZE) {
+		ob_status = obs[i];
+		ob_data = obs[i + RMI_F03_OB_DATA_OFFSET];
+		serio_flags = 0;
+
+		if (!(ob_status & RMI_F03_RX_DATA_OFB))
+			continue;
+
+		if (ob_status & RMI_F03_OB_FLAG_TIMEOUT)
+			serio_flags |= SERIO_TIMEOUT;
+		if (ob_status & RMI_F03_OB_FLAG_PARITY)
+			serio_flags |= SERIO_PARITY;
+
+		rmi_dbg(RMI_DEBUG_FN, &fn->dev,
+			"%s: Received %.2hhx from PS2 guest T: %c P: %c\n",
+			__func__, ob_data,
+			serio_flags & SERIO_TIMEOUT ?  'Y' : 'N',
+			serio_flags & SERIO_PARITY ? 'Y' : 'N');
+
+		serio_interrupt(f03->serio, ob_data, serio_flags);
+	}
+
+	return 0;
+}
+
+static void rmi_f03_remove(struct rmi_function *fn)
+{
+	struct f03_data *f03 = dev_get_drvdata(&fn->dev);
+
+	serio_unregister_port(f03->serio);
+}
+
+struct rmi_function_handler rmi_f03_handler = {
+	.driver = {
+		.name = "rmi4_f03",
+	},
+	.func = 0x03,
+	.probe = rmi_f03_probe,
+	.config = rmi_f03_config,
+	.attention = rmi_f03_attention,
+	.remove = rmi_f03_remove,
+};
+
+MODULE_AUTHOR("Lyude Paul <thatslyude@gmail.com>");
+MODULE_DESCRIPTION("RMI F03 module");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/rmi4/rmi_f11.c b/drivers/input/rmi4/rmi_f11.c
index f798f427a46f..bc5e37f30ac1 100644
--- a/drivers/input/rmi4/rmi_f11.c
+++ b/drivers/input/rmi4/rmi_f11.c
@@ -571,31 +571,48 @@ static inline u8 rmi_f11_parse_finger_state(const u8 *f_state, u8 n_finger)
 
 static void rmi_f11_finger_handler(struct f11_data *f11,
 				   struct rmi_2d_sensor *sensor,
-				   unsigned long *irq_bits, int num_irq_regs)
+				   unsigned long *irq_bits, int num_irq_regs,
+				   int size)
 {
 	const u8 *f_state = f11->data.f_state;
 	u8 finger_state;
 	u8 i;
+	int abs_fingers;
+	int rel_fingers;
+	int abs_size = sensor->nbr_fingers * RMI_F11_ABS_BYTES;
 
 	int abs_bits = bitmap_and(f11->result_bits, irq_bits, f11->abs_mask,
 				  num_irq_regs * 8);
 	int rel_bits = bitmap_and(f11->result_bits, irq_bits, f11->rel_mask,
 				  num_irq_regs * 8);
 
-	for (i = 0; i < sensor->nbr_fingers; i++) {
-		/* Possible of having 4 fingers per f_statet register */
-		finger_state = rmi_f11_parse_finger_state(f_state, i);
-		if (finger_state == F11_RESERVED) {
-			pr_err("Invalid finger state[%d]: 0x%02x", i,
-				finger_state);
-			continue;
-		}
+	if (abs_bits) {
+		if (abs_size > size)
+			abs_fingers = size / RMI_F11_ABS_BYTES;
+		else
+			abs_fingers = sensor->nbr_fingers;
+
+		for (i = 0; i < abs_fingers; i++) {
+			/* Possible of having 4 fingers per f_state register */
+			finger_state = rmi_f11_parse_finger_state(f_state, i);
+			if (finger_state == F11_RESERVED) {
+				pr_err("Invalid finger state[%d]: 0x%02x", i,
+					finger_state);
+				continue;
+			}
 
-		if (abs_bits)
 			rmi_f11_abs_pos_process(f11, sensor, &sensor->objs[i],
 							finger_state, i);
+		}
+	}
+
+	if (rel_bits) {
+		if ((abs_size + sensor->nbr_fingers * RMI_F11_REL_BYTES) > size)
+			rel_fingers = (size - abs_size) / RMI_F11_REL_BYTES;
+		else
+			rel_fingers = sensor->nbr_fingers;
 
-		if (rel_bits)
+		for (i = 0; i < rel_fingers; i++)
 			rmi_f11_rel_pos_report(f11, i);
 	}
 
@@ -611,7 +628,7 @@ static void rmi_f11_finger_handler(struct f11_data *f11,
 					      sensor->nbr_fingers,
 					      sensor->dmax);
 
-		for (i = 0; i < sensor->nbr_fingers; i++) {
+		for (i = 0; i < abs_fingers; i++) {
 			finger_state = rmi_f11_parse_finger_state(f_state, i);
 			if (finger_state == F11_RESERVED)
 				/* no need to send twice the error */
@@ -1062,8 +1079,8 @@ static int rmi_f11_initialize(struct rmi_function *fn)
 		rc = rmi_2d_sensor_of_probe(&fn->dev, &f11->sensor_pdata);
 		if (rc)
 			return rc;
-	} else if (pdata->sensor_pdata) {
-		f11->sensor_pdata = *pdata->sensor_pdata;
+	} else {
+		f11->sensor_pdata = pdata->sensor_pdata;
 	}
 
 	f11->rezero_wait_ms = f11->sensor_pdata.rezero_wait;
@@ -1124,6 +1141,8 @@ static int rmi_f11_initialize(struct rmi_function *fn)
 	sensor->topbuttonpad = f11->sensor_pdata.topbuttonpad;
 	sensor->kernel_tracking = f11->sensor_pdata.kernel_tracking;
 	sensor->dmax = f11->sensor_pdata.dmax;
+	sensor->dribble = f11->sensor_pdata.dribble;
+	sensor->palm_detect = f11->sensor_pdata.palm_detect;
 
 	if (f11->sens_query.has_physical_props) {
 		sensor->x_mm = f11->sens_query.x_sensor_size_mm;
@@ -1191,11 +1210,33 @@ static int rmi_f11_initialize(struct rmi_function *fn)
 		ctrl->ctrl0_11[RMI_F11_DELTA_Y_THRESHOLD] =
 			sensor->axis_align.delta_y_threshold;
 
-	if (f11->sens_query.has_dribble)
-		ctrl->ctrl0_11[0] = ctrl->ctrl0_11[0] & ~BIT(6);
+	if (f11->sens_query.has_dribble) {
+		switch (sensor->dribble) {
+		case RMI_REG_STATE_OFF:
+			ctrl->ctrl0_11[0] &= ~BIT(6);
+			break;
+		case RMI_REG_STATE_ON:
+			ctrl->ctrl0_11[0] |= BIT(6);
+			break;
+		case RMI_REG_STATE_DEFAULT:
+		default:
+			break;
+		}
+	}
 
-	if (f11->sens_query.has_palm_det)
-		ctrl->ctrl0_11[11] = ctrl->ctrl0_11[11] & ~BIT(0);
+	if (f11->sens_query.has_palm_det) {
+		switch (sensor->palm_detect) {
+		case RMI_REG_STATE_OFF:
+			ctrl->ctrl0_11[11] &= ~BIT(0);
+			break;
+		case RMI_REG_STATE_ON:
+			ctrl->ctrl0_11[11] |= BIT(0);
+			break;
+		case RMI_REG_STATE_DEFAULT:
+		default:
+			break;
+		}
+	}
 
 	rc = f11_write_control_regs(fn, &f11->sens_query,
 			   &f11->dev_controls, fn->fd.query_base_addr);
@@ -1241,12 +1282,21 @@ static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits)
 	struct f11_data *f11 = dev_get_drvdata(&fn->dev);
 	u16 data_base_addr = fn->fd.data_base_addr;
 	int error;
+	int valid_bytes = f11->sensor.pkt_size;
 
-	if (rmi_dev->xport->attn_data) {
-		memcpy(f11->sensor.data_pkt, rmi_dev->xport->attn_data,
-			f11->sensor.attn_size);
-		rmi_dev->xport->attn_data += f11->sensor.attn_size;
-		rmi_dev->xport->attn_size -= f11->sensor.attn_size;
+	if (drvdata->attn_data.data) {
+		/*
+		 * The valid data in the attention report is less then
+		 * expected. Only process the complete fingers.
+		 */
+		if (f11->sensor.attn_size > drvdata->attn_data.size)
+			valid_bytes = drvdata->attn_data.size;
+		else
+			valid_bytes = f11->sensor.attn_size;
+		memcpy(f11->sensor.data_pkt, drvdata->attn_data.data,
+			valid_bytes);
+		drvdata->attn_data.data += f11->sensor.attn_size;
+		drvdata->attn_data.size -= f11->sensor.attn_size;
 	} else {
 		error = rmi_read_block(rmi_dev,
 				data_base_addr, f11->sensor.data_pkt,
@@ -1256,7 +1306,7 @@ static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits)
 	}
 
 	rmi_f11_finger_handler(f11, &f11->sensor, irq_bits,
-				drvdata->num_of_irq_regs);
+				drvdata->num_of_irq_regs, valid_bytes);
 
 	return 0;
 }
diff --git a/drivers/input/rmi4/rmi_f12.c b/drivers/input/rmi4/rmi_f12.c
index 332c02f0b107..07aff4356fe0 100644
--- a/drivers/input/rmi4/rmi_f12.c
+++ b/drivers/input/rmi4/rmi_f12.c
@@ -26,9 +26,12 @@ enum rmi_f12_object_type {
 	RMI_F12_OBJECT_SMALL_OBJECT		= 0x0D,
 };
 
+#define F12_DATA1_BYTES_PER_OBJ			8
+
 struct f12_data {
 	struct rmi_2d_sensor sensor;
 	struct rmi_2d_sensor_platform_data sensor_pdata;
+	bool has_dribble;
 
 	u16 data_addr;
 
@@ -68,10 +71,6 @@ static int rmi_f12_read_sensor_tuning(struct f12_data *f12)
 	u8 buf[15];
 	int pitch_x = 0;
 	int pitch_y = 0;
-	int clip_x_low = 0;
-	int clip_x_high = 0;
-	int clip_y_low = 0;
-	int clip_y_high = 0;
 	int rx_receivers = 0;
 	int tx_receivers = 0;
 	int sensor_flags = 0;
@@ -124,7 +123,9 @@ static int rmi_f12_read_sensor_tuning(struct f12_data *f12)
 	}
 
 	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: x low: %d x high: %d y low: %d y high: %d\n",
-		__func__, clip_x_low, clip_x_high, clip_y_low, clip_y_high);
+		__func__,
+		sensor->axis_align.clip_x_low, sensor->axis_align.clip_x_high,
+		sensor->axis_align.clip_y_low, sensor->axis_align.clip_y_high);
 
 	if (rmi_register_desc_has_subpacket(item, 3)) {
 		rx_receivers = buf[offset];
@@ -146,12 +147,16 @@ static int rmi_f12_read_sensor_tuning(struct f12_data *f12)
 	return 0;
 }
 
-static void rmi_f12_process_objects(struct f12_data *f12, u8 *data1)
+static void rmi_f12_process_objects(struct f12_data *f12, u8 *data1, int size)
 {
 	int i;
 	struct rmi_2d_sensor *sensor = &f12->sensor;
+	int objects = f12->data1->num_subpackets;
+
+	if ((f12->data1->num_subpackets * F12_DATA1_BYTES_PER_OBJ) > size)
+		objects = size / F12_DATA1_BYTES_PER_OBJ;
 
-	for (i = 0; i < f12->data1->num_subpackets; i++) {
+	for (i = 0; i < objects; i++) {
 		struct rmi_2d_sensor_abs_object *obj = &sensor->objs[i];
 
 		obj->type = RMI_2D_OBJECT_NONE;
@@ -182,7 +187,7 @@ static void rmi_f12_process_objects(struct f12_data *f12, u8 *data1)
 
 		rmi_2d_sensor_abs_process(sensor, obj, i);
 
-		data1 += 8;
+		data1 += F12_DATA1_BYTES_PER_OBJ;
 	}
 
 	if (sensor->kernel_tracking)
@@ -192,7 +197,7 @@ static void rmi_f12_process_objects(struct f12_data *f12, u8 *data1)
 				      sensor->nbr_fingers,
 				      sensor->dmax);
 
-	for (i = 0; i < sensor->nbr_fingers; i++)
+	for (i = 0; i < objects; i++)
 		rmi_2d_sensor_abs_report(sensor, &sensor->objs[i], i);
 }
 
@@ -201,14 +206,20 @@ static int rmi_f12_attention(struct rmi_function *fn,
 {
 	int retval;
 	struct rmi_device *rmi_dev = fn->rmi_dev;
+	struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
 	struct f12_data *f12 = dev_get_drvdata(&fn->dev);
 	struct rmi_2d_sensor *sensor = &f12->sensor;
-
-	if (rmi_dev->xport->attn_data) {
-		memcpy(sensor->data_pkt, rmi_dev->xport->attn_data,
-			sensor->attn_size);
-		rmi_dev->xport->attn_data += sensor->attn_size;
-		rmi_dev->xport->attn_size -= sensor->attn_size;
+	int valid_bytes = sensor->pkt_size;
+
+	if (drvdata->attn_data.data) {
+		if (sensor->attn_size > drvdata->attn_data.size)
+			valid_bytes = drvdata->attn_data.size;
+		else
+			valid_bytes = sensor->attn_size;
+		memcpy(sensor->data_pkt, drvdata->attn_data.data,
+			valid_bytes);
+		drvdata->attn_data.data += sensor->attn_size;
+		drvdata->attn_data.size -= sensor->attn_size;
 	} else {
 		retval = rmi_read_block(rmi_dev, f12->data_addr,
 					sensor->data_pkt, sensor->pkt_size);
@@ -221,19 +232,83 @@ static int rmi_f12_attention(struct rmi_function *fn,
 
 	if (f12->data1)
 		rmi_f12_process_objects(f12,
-			&sensor->data_pkt[f12->data1_offset]);
+			&sensor->data_pkt[f12->data1_offset], valid_bytes);
 
 	input_mt_sync_frame(sensor->input);
 
 	return 0;
 }
 
+static int rmi_f12_write_control_regs(struct rmi_function *fn)
+{
+	int ret;
+	const struct rmi_register_desc_item *item;
+	struct rmi_device *rmi_dev = fn->rmi_dev;
+	struct f12_data *f12 = dev_get_drvdata(&fn->dev);
+	int control_size;
+	char buf[3];
+	u16 control_offset = 0;
+	u8 subpacket_offset = 0;
+
+	if (f12->has_dribble
+	    && (f12->sensor.dribble != RMI_REG_STATE_DEFAULT)) {
+		item = rmi_get_register_desc_item(&f12->control_reg_desc, 20);
+		if (item) {
+			control_offset = rmi_register_desc_calc_reg_offset(
+						&f12->control_reg_desc, 20);
+
+			/*
+			 * The byte containing the EnableDribble bit will be
+			 * in either byte 0 or byte 2 of control 20. Depending
+			 * on the existence of subpacket 0. If control 20 is
+			 * larger then 3 bytes, just read the first 3.
+			 */
+			control_size = min(item->reg_size, 3UL);
+
+			ret = rmi_read_block(rmi_dev, fn->fd.control_base_addr
+					+ control_offset, buf, control_size);
+			if (ret)
+				return ret;
+
+			if (rmi_register_desc_has_subpacket(item, 0))
+				subpacket_offset += 1;
+
+			switch (f12->sensor.dribble) {
+			case RMI_REG_STATE_OFF:
+				buf[subpacket_offset] &= ~BIT(2);
+				break;
+			case RMI_REG_STATE_ON:
+				buf[subpacket_offset] |= BIT(2);
+				break;
+			case RMI_REG_STATE_DEFAULT:
+			default:
+				break;
+			}
+
+			ret = rmi_write_block(rmi_dev,
+				fn->fd.control_base_addr + control_offset,
+				buf, control_size);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return 0;
+
+}
+
 static int rmi_f12_config(struct rmi_function *fn)
 {
 	struct rmi_driver *drv = fn->rmi_dev->driver;
+	int ret;
 
 	drv->set_irq_bits(fn->rmi_dev, fn->irq_mask);
 
+	ret = rmi_f12_write_control_regs(fn);
+	if (ret)
+		dev_warn(&fn->dev,
+			"Failed to write F12 control registers: %d\n", ret);
+
 	return 0;
 }
 
@@ -247,7 +322,7 @@ static int rmi_f12_probe(struct rmi_function *fn)
 	const struct rmi_register_desc_item *item;
 	struct rmi_2d_sensor *sensor;
 	struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
-	struct rmi_transport_dev *xport = rmi_dev->xport;
+	struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
 	u16 data_offset = 0;
 
 	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s\n", __func__);
@@ -260,7 +335,7 @@ static int rmi_f12_probe(struct rmi_function *fn)
 	}
 	++query_addr;
 
-	if (!(buf & 0x1)) {
+	if (!(buf & BIT(0))) {
 		dev_err(&fn->dev,
 			"Behavior of F12 without register descriptors is undefined.\n");
 		return -ENODEV;
@@ -270,12 +345,14 @@ static int rmi_f12_probe(struct rmi_function *fn)
 	if (!f12)
 		return -ENOMEM;
 
+	f12->has_dribble = !!(buf & BIT(3));
+
 	if (fn->dev.of_node) {
 		ret = rmi_2d_sensor_of_probe(&fn->dev, &f12->sensor_pdata);
 		if (ret)
 			return ret;
-	} else if (pdata->sensor_pdata) {
-		f12->sensor_pdata = *pdata->sensor_pdata;
+	} else {
+		f12->sensor_pdata = pdata->sensor_pdata;
 	}
 
 	ret = rmi_read_register_desc(rmi_dev, query_addr,
@@ -318,6 +395,7 @@ static int rmi_f12_probe(struct rmi_function *fn)
 
 	sensor->x_mm = f12->sensor_pdata.x_mm;
 	sensor->y_mm = f12->sensor_pdata.y_mm;
+	sensor->dribble = f12->sensor_pdata.dribble;
 
 	if (sensor->sensor_type == rmi_sensor_default)
 		sensor->sensor_type =
@@ -343,7 +421,7 @@ static int rmi_f12_probe(struct rmi_function *fn)
 	 * HID attention reports.
 	 */
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 0);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
 		data_offset += item->reg_size;
 
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 1);
@@ -357,15 +435,15 @@ static int rmi_f12_probe(struct rmi_function *fn)
 	}
 
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 2);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
 		data_offset += item->reg_size;
 
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 3);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
 		data_offset += item->reg_size;
 
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 4);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
 		data_offset += item->reg_size;
 
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 5);
@@ -377,22 +455,22 @@ static int rmi_f12_probe(struct rmi_function *fn)
 	}
 
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 6);
-	if (item && !xport->attn_data) {
+	if (item && !drvdata->attn_data.data) {
 		f12->data6 = item;
 		f12->data6_offset = data_offset;
 		data_offset += item->reg_size;
 	}
 
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 7);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
 		data_offset += item->reg_size;
 
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 8);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
 		data_offset += item->reg_size;
 
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 9);
-	if (item && !xport->attn_data) {
+	if (item && !drvdata->attn_data.data) {
 		f12->data9 = item;
 		f12->data9_offset = data_offset;
 		data_offset += item->reg_size;
@@ -401,27 +479,27 @@ static int rmi_f12_probe(struct rmi_function *fn)
 	}
 
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 10);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
 		data_offset += item->reg_size;
 
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 11);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
 		data_offset += item->reg_size;
 
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 12);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
 		data_offset += item->reg_size;
 
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 13);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
 		data_offset += item->reg_size;
 
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 14);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
 		data_offset += item->reg_size;
 
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 15);
-	if (item && !xport->attn_data) {
+	if (item && !drvdata->attn_data.data) {
 		f12->data15 = item;
 		f12->data15_offset = data_offset;
 		data_offset += item->reg_size;
diff --git a/drivers/input/rmi4/rmi_f30.c b/drivers/input/rmi4/rmi_f30.c
index 760aff1bc420..f4b491e3e0fd 100644
--- a/drivers/input/rmi4/rmi_f30.c
+++ b/drivers/input/rmi4/rmi_f30.c
@@ -99,6 +99,7 @@ static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
 {
 	struct f30_data *f30 = dev_get_drvdata(&fn->dev);
 	struct rmi_device *rmi_dev = fn->rmi_dev;
+	struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
 	int retval;
 	int gpiled = 0;
 	int value = 0;
@@ -109,11 +110,15 @@ static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
 		return 0;
 
 	/* Read the gpi led data. */
-	if (rmi_dev->xport->attn_data) {
-		memcpy(f30->data_regs, rmi_dev->xport->attn_data,
+	if (drvdata->attn_data.data) {
+		if (drvdata->attn_data.size < f30->register_count) {
+			dev_warn(&fn->dev, "F30 interrupted, but data is missing\n");
+			return 0;
+		}
+		memcpy(f30->data_regs, drvdata->attn_data.data,
 			f30->register_count);
-		rmi_dev->xport->attn_data += f30->register_count;
-		rmi_dev->xport->attn_size -= f30->register_count;
+		drvdata->attn_data.data += f30->register_count;
+		drvdata->attn_data.size -= f30->register_count;
 	} else {
 		retval = rmi_read_block(rmi_dev, fn->fd.data_base_addr,
 			f30->data_regs, f30->register_count);
@@ -192,7 +197,7 @@ static int rmi_f30_config(struct rmi_function *fn)
 				rmi_get_platform_data(fn->rmi_dev);
 	int error;
 
-	if (pdata->f30_data && pdata->f30_data->disable) {
+	if (pdata->f30_data.disable) {
 		drv->clear_irq_bits(fn->rmi_dev, fn->irq_mask);
 	} else {
 		/* Write Control Register values back to device */
@@ -351,7 +356,7 @@ static inline int rmi_f30_initialize(struct rmi_function *fn)
 	f30->gpioled_key_map = (u16 *)map_memory;
 
 	pdata = rmi_get_platform_data(rmi_dev);
-	if (pdata && f30->has_gpio) {
+	if (f30->has_gpio) {
 		button = BTN_LEFT;
 		for (i = 0; i < f30->gpioled_count; i++) {
 			if (rmi_f30_is_valid_button(i, f30->ctrl)) {
@@ -362,8 +367,7 @@ static inline int rmi_f30_initialize(struct rmi_function *fn)
 				 * f30->has_mech_mouse_btns, but I am
 				 * not sure, so use only the pdata info
 				 */
-				if (pdata->f30_data &&
-				    pdata->f30_data->buttonpad)
+				if (pdata->f30_data.buttonpad)
 					break;
 			}
 		}
@@ -378,7 +382,7 @@ static int rmi_f30_probe(struct rmi_function *fn)
 	const struct rmi_device_platform_data *pdata =
 				rmi_get_platform_data(fn->rmi_dev);
 
-	if (pdata->f30_data && pdata->f30_data->disable)
+	if (pdata->f30_data.disable)
 		return 0;
 
 	rc = rmi_f30_initialize(fn);
diff --git a/drivers/input/rmi4/rmi_f34.c b/drivers/input/rmi4/rmi_f34.c
new file mode 100644
index 000000000000..9774dfbab9bb
--- /dev/null
+++ b/drivers/input/rmi4/rmi_f34.c
@@ -0,0 +1,516 @@
+/*
+ * Copyright (c) 2007-2016, Synaptics Incorporated
+ * Copyright (C) 2016 Zodiac Inflight Innovations
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/rmi.h>
+#include <linux/firmware.h>
+#include <asm/unaligned.h>
+#include <asm/unaligned.h>
+#include <linux/bitops.h>
+
+#include "rmi_driver.h"
+#include "rmi_f34.h"
+
+static int rmi_f34_write_bootloader_id(struct f34_data *f34)
+{
+	struct rmi_function *fn = f34->fn;
+	struct rmi_device *rmi_dev = fn->rmi_dev;
+	u8 bootloader_id[F34_BOOTLOADER_ID_LEN];
+	int ret;
+
+	ret = rmi_read_block(rmi_dev, fn->fd.query_base_addr,
+			     bootloader_id, sizeof(bootloader_id));
+	if (ret) {
+		dev_err(&fn->dev, "%s: Reading bootloader ID failed: %d\n",
+				__func__, ret);
+		return ret;
+	}
+
+	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: writing bootloader id '%c%c'\n",
+			__func__, bootloader_id[0], bootloader_id[1]);
+
+	ret = rmi_write_block(rmi_dev,
+			      fn->fd.data_base_addr + F34_BLOCK_DATA_OFFSET,
+			      bootloader_id, sizeof(bootloader_id));
+	if (ret) {
+		dev_err(&fn->dev, "Failed to write bootloader ID: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rmi_f34_command(struct f34_data *f34, u8 command,
+			   unsigned int timeout, bool write_bl_id)
+{
+	struct rmi_function *fn = f34->fn;
+	struct rmi_device *rmi_dev = fn->rmi_dev;
+	int ret;
+
+	if (write_bl_id) {
+		ret = rmi_f34_write_bootloader_id(f34);
+		if (ret)
+			return ret;
+	}
+
+	init_completion(&f34->v5.cmd_done);
+
+	ret = rmi_read(rmi_dev, f34->v5.ctrl_address, &f34->v5.status);
+	if (ret) {
+		dev_err(&f34->fn->dev,
+			"%s: Failed to read cmd register: %d (command %#02x)\n",
+			__func__, ret, command);
+		return ret;
+	}
+
+	f34->v5.status |= command & 0x0f;
+
+	ret = rmi_write(rmi_dev, f34->v5.ctrl_address, f34->v5.status);
+	if (ret < 0) {
+		dev_err(&f34->fn->dev,
+			"Failed to write F34 command %#02x: %d\n",
+			command, ret);
+		return ret;
+	}
+
+	if (!wait_for_completion_timeout(&f34->v5.cmd_done,
+				msecs_to_jiffies(timeout))) {
+
+		ret = rmi_read(rmi_dev, f34->v5.ctrl_address, &f34->v5.status);
+		if (ret) {
+			dev_err(&f34->fn->dev,
+				"%s: cmd %#02x timed out: %d\n",
+				__func__, command, ret);
+			return ret;
+		}
+
+		if (f34->v5.status & 0x7f) {
+			dev_err(&f34->fn->dev,
+				"%s: cmd %#02x timed out, status: %#02x\n",
+				__func__, command, f34->v5.status);
+			return -ETIMEDOUT;
+		}
+	}
+
+	return 0;
+}
+
+static int rmi_f34_attention(struct rmi_function *fn, unsigned long *irq_bits)
+{
+	struct f34_data *f34 = dev_get_drvdata(&fn->dev);
+	int ret;
+
+	if (f34->bl_version != 5)
+		return 0;
+
+	ret = rmi_read(f34->fn->rmi_dev, f34->v5.ctrl_address, &f34->v5.status);
+	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: status: %#02x, ret: %d\n",
+		__func__, f34->v5.status, ret);
+
+	if (!ret && !(f34->v5.status & 0x7f))
+		complete(&f34->v5.cmd_done);
+
+	return 0;
+}
+
+static int rmi_f34_write_blocks(struct f34_data *f34, const void *data,
+				int block_count, u8 command)
+{
+	struct rmi_function *fn = f34->fn;
+	struct rmi_device *rmi_dev = fn->rmi_dev;
+	u16 address = fn->fd.data_base_addr + F34_BLOCK_DATA_OFFSET;
+	u8 start_address[] = { 0, 0 };
+	int i;
+	int ret;
+
+	ret = rmi_write_block(rmi_dev, fn->fd.data_base_addr,
+			      start_address, sizeof(start_address));
+	if (ret) {
+		dev_err(&fn->dev, "Failed to write initial zeros: %d\n", ret);
+		return ret;
+	}
+
+	for (i = 0; i < block_count; i++) {
+		ret = rmi_write_block(rmi_dev, address,
+				      data, f34->v5.block_size);
+		if (ret) {
+			dev_err(&fn->dev,
+				"failed to write block #%d: %d\n", i, ret);
+			return ret;
+		}
+
+		ret = rmi_f34_command(f34, command, F34_IDLE_WAIT_MS, false);
+		if (ret) {
+			dev_err(&fn->dev,
+				"Failed to write command for block #%d: %d\n",
+				i, ret);
+			return ret;
+		}
+
+		rmi_dbg(RMI_DEBUG_FN, &fn->dev, "wrote block %d of %d\n",
+			i + 1, block_count);
+
+		data += f34->v5.block_size;
+	}
+
+	return 0;
+}
+
+static int rmi_f34_write_firmware(struct f34_data *f34, const void *data)
+{
+	return rmi_f34_write_blocks(f34, data, f34->v5.fw_blocks,
+				    F34_WRITE_FW_BLOCK);
+}
+
+static int rmi_f34_write_config(struct f34_data *f34, const void *data)
+{
+	return rmi_f34_write_blocks(f34, data, f34->v5.config_blocks,
+				    F34_WRITE_CONFIG_BLOCK);
+}
+
+int rmi_f34_enable_flash(struct f34_data *f34)
+{
+	return rmi_f34_command(f34, F34_ENABLE_FLASH_PROG,
+			       F34_ENABLE_WAIT_MS, true);
+}
+
+static int rmi_f34_flash_firmware(struct f34_data *f34,
+				  const struct rmi_f34_firmware *syn_fw)
+{
+	struct rmi_function *fn = f34->fn;
+	int ret;
+
+	if (syn_fw->image_size) {
+		dev_info(&fn->dev, "Erasing firmware...\n");
+		ret = rmi_f34_command(f34, F34_ERASE_ALL,
+				      F34_ERASE_WAIT_MS, true);
+		if (ret)
+			return ret;
+
+		dev_info(&fn->dev, "Writing firmware (%d bytes)...\n",
+			 syn_fw->image_size);
+		ret = rmi_f34_write_firmware(f34, syn_fw->data);
+		if (ret)
+			return ret;
+	}
+
+	if (syn_fw->config_size) {
+		/*
+		 * We only need to erase config if we haven't updated
+		 * firmware.
+		 */
+		if (!syn_fw->image_size) {
+			dev_info(&fn->dev, "Erasing config...\n");
+			ret = rmi_f34_command(f34, F34_ERASE_CONFIG,
+					      F34_ERASE_WAIT_MS, true);
+			if (ret)
+				return ret;
+		}
+
+		dev_info(&fn->dev, "Writing config (%d bytes)...\n",
+			 syn_fw->config_size);
+		ret = rmi_f34_write_config(f34,
+				&syn_fw->data[syn_fw->image_size]);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+int rmi_f34_update_firmware(struct f34_data *f34, const struct firmware *fw)
+{
+	const struct rmi_f34_firmware *syn_fw;
+	int ret;
+
+	syn_fw = (const struct rmi_f34_firmware *)fw->data;
+	BUILD_BUG_ON(offsetof(struct rmi_f34_firmware, data) !=
+			F34_FW_IMAGE_OFFSET);
+
+	rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev,
+		"FW size:%d, checksum:%08x, image_size:%d, config_size:%d\n",
+		(int)fw->size,
+		le32_to_cpu(syn_fw->checksum),
+		le32_to_cpu(syn_fw->image_size),
+		le32_to_cpu(syn_fw->config_size));
+
+	rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev,
+		"FW bootloader_id:%02x, product_id:%.*s, info: %02x%02x\n",
+		syn_fw->bootloader_version,
+		(int)sizeof(syn_fw->product_id), syn_fw->product_id,
+		syn_fw->product_info[0], syn_fw->product_info[1]);
+
+	if (syn_fw->image_size &&
+	    syn_fw->image_size != f34->v5.fw_blocks * f34->v5.block_size) {
+		dev_err(&f34->fn->dev,
+			"Bad firmware image: fw size %d, expected %d\n",
+			syn_fw->image_size,
+			f34->v5.fw_blocks * f34->v5.block_size);
+		ret = -EILSEQ;
+		goto out;
+	}
+
+	if (syn_fw->config_size &&
+	    syn_fw->config_size != f34->v5.config_blocks * f34->v5.block_size) {
+		dev_err(&f34->fn->dev,
+			"Bad firmware image: config size %d, expected %d\n",
+			syn_fw->config_size,
+			f34->v5.config_blocks * f34->v5.block_size);
+		ret = -EILSEQ;
+		goto out;
+	}
+
+	if (syn_fw->image_size && !syn_fw->config_size) {
+		dev_err(&f34->fn->dev, "Bad firmware image: no config data\n");
+		ret = -EILSEQ;
+		goto out;
+	}
+
+	dev_info(&f34->fn->dev, "Firmware image OK\n");
+	mutex_lock(&f34->v5.flash_mutex);
+
+	ret = rmi_f34_flash_firmware(f34, syn_fw);
+
+	mutex_unlock(&f34->v5.flash_mutex);
+
+out:
+	return ret;
+}
+
+static int rmi_firmware_update(struct rmi_driver_data *data,
+			       const struct firmware *fw)
+{
+	struct rmi_device *rmi_dev = data->rmi_dev;
+	struct device *dev = &rmi_dev->dev;
+	struct f34_data *f34;
+	int ret;
+
+	if (!data->f34_container) {
+		dev_warn(dev, "%s: No F34 present!\n", __func__);
+		return -EINVAL;
+	}
+
+	f34 = dev_get_drvdata(&data->f34_container->dev);
+
+	if (f34->bl_version == 7) {
+		if (data->pdt_props & HAS_BSR) {
+			dev_err(dev, "%s: LTS not supported\n", __func__);
+			return -ENODEV;
+		}
+	} else if (f34->bl_version != 5) {
+		dev_warn(dev, "F34 V%d not supported!\n",
+			 data->f34_container->fd.function_version);
+		return -ENODEV;
+	}
+
+	/* Enter flash mode */
+	if (f34->bl_version == 7)
+		ret = rmi_f34v7_start_reflash(f34, fw);
+	else
+		ret = rmi_f34_enable_flash(f34);
+	if (ret)
+		return ret;
+
+	rmi_disable_irq(rmi_dev, false);
+
+	/* Tear down functions and re-probe */
+	rmi_free_function_list(rmi_dev);
+
+	ret = rmi_probe_interrupts(data);
+	if (ret)
+		return ret;
+
+	ret = rmi_init_functions(data);
+	if (ret)
+		return ret;
+
+	if (!data->bootloader_mode || !data->f34_container) {
+		dev_warn(dev, "%s: No F34 present or not in bootloader!\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	rmi_enable_irq(rmi_dev, false);
+
+	f34 = dev_get_drvdata(&data->f34_container->dev);
+
+	/* Perform firmware update */
+	if (f34->bl_version == 7)
+		ret = rmi_f34v7_do_reflash(f34, fw);
+	else
+		ret = rmi_f34_update_firmware(f34, fw);
+
+	dev_info(&f34->fn->dev, "Firmware update complete, status:%d\n", ret);
+
+	rmi_disable_irq(rmi_dev, false);
+
+	/* Re-probe */
+	rmi_dbg(RMI_DEBUG_FN, dev, "Re-probing device\n");
+	rmi_free_function_list(rmi_dev);
+
+	ret = rmi_scan_pdt(rmi_dev, NULL, rmi_initial_reset);
+	if (ret < 0)
+		dev_warn(dev, "RMI reset failed!\n");
+
+	ret = rmi_probe_interrupts(data);
+	if (ret)
+		return ret;
+
+	ret = rmi_init_functions(data);
+	if (ret)
+		return ret;
+
+	rmi_enable_irq(rmi_dev, false);
+
+	if (data->f01_container->dev.driver)
+		/* Driver already bound, so enable ATTN now. */
+		return rmi_enable_sensor(rmi_dev);
+
+	rmi_dbg(RMI_DEBUG_FN, dev, "%s complete\n", __func__);
+
+	return ret;
+}
+
+static int rmi_firmware_update(struct rmi_driver_data *data,
+			       const struct firmware *fw);
+
+static ssize_t rmi_driver_update_fw_store(struct device *dev,
+					  struct device_attribute *dattr,
+					  const char *buf, size_t count)
+{
+	struct rmi_driver_data *data = dev_get_drvdata(dev);
+	char fw_name[NAME_MAX];
+	const struct firmware *fw;
+	size_t copy_count = count;
+	int ret;
+
+	if (count == 0 || count >= NAME_MAX)
+		return -EINVAL;
+
+	if (buf[count - 1] == '\0' || buf[count - 1] == '\n')
+		copy_count -= 1;
+
+	strncpy(fw_name, buf, copy_count);
+	fw_name[copy_count] = '\0';
+
+	ret = request_firmware(&fw, fw_name, dev);
+	if (ret)
+		return ret;
+
+	dev_info(dev, "Flashing %s\n", fw_name);
+
+	ret = rmi_firmware_update(data, fw);
+
+	release_firmware(fw);
+
+	return ret ?: count;
+}
+
+static DEVICE_ATTR(update_fw, 0200, NULL, rmi_driver_update_fw_store);
+
+static struct attribute *rmi_firmware_attrs[] = {
+	&dev_attr_update_fw.attr,
+	NULL
+};
+
+static struct attribute_group rmi_firmware_attr_group = {
+	.attrs = rmi_firmware_attrs,
+};
+
+static int rmi_f34_probe(struct rmi_function *fn)
+{
+	struct f34_data *f34;
+	unsigned char f34_queries[9];
+	bool has_config_id;
+	u8 version = fn->fd.function_version;
+	int ret;
+
+	f34 = devm_kzalloc(&fn->dev, sizeof(struct f34_data), GFP_KERNEL);
+	if (!f34)
+		return -ENOMEM;
+
+	f34->fn = fn;
+	dev_set_drvdata(&fn->dev, f34);
+
+	/* v5 code only supported version 0, try V7 probe */
+	if (version > 0)
+		return rmi_f34v7_probe(f34);
+	else if (version != 0)
+		return -ENODEV;
+
+	f34->bl_version = 5;
+
+	ret = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr,
+			     f34_queries, sizeof(f34_queries));
+	if (ret) {
+		dev_err(&fn->dev, "%s: Failed to query properties\n",
+			__func__);
+		return ret;
+	}
+
+	snprintf(f34->bootloader_id, sizeof(f34->bootloader_id),
+		 "%c%c", f34_queries[0], f34_queries[1]);
+
+	mutex_init(&f34->v5.flash_mutex);
+	init_completion(&f34->v5.cmd_done);
+
+	f34->v5.block_size = get_unaligned_le16(&f34_queries[3]);
+	f34->v5.fw_blocks = get_unaligned_le16(&f34_queries[5]);
+	f34->v5.config_blocks = get_unaligned_le16(&f34_queries[7]);
+	f34->v5.ctrl_address = fn->fd.data_base_addr + F34_BLOCK_DATA_OFFSET +
+		f34->v5.block_size;
+	has_config_id = f34_queries[2] & (1 << 2);
+
+	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "Bootloader ID: %s\n",
+		f34->bootloader_id);
+	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "Block size: %d\n",
+		f34->v5.block_size);
+	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "FW blocks: %d\n",
+		f34->v5.fw_blocks);
+	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "CFG blocks: %d\n",
+		f34->v5.config_blocks);
+
+	if (has_config_id) {
+		ret = rmi_read_block(fn->rmi_dev, fn->fd.control_base_addr,
+				     f34_queries, sizeof(f34_queries));
+		if (ret) {
+			dev_err(&fn->dev, "Failed to read F34 config ID\n");
+			return ret;
+		}
+
+		snprintf(f34->configuration_id, sizeof(f34->configuration_id),
+			 "%02x%02x%02x%02x",
+			 f34_queries[0], f34_queries[1],
+			 f34_queries[2], f34_queries[3]);
+
+		rmi_dbg(RMI_DEBUG_FN, &fn->dev, "Configuration ID: %s\n",
+			 f34->configuration_id);
+	}
+
+	return 0;
+}
+
+int rmi_f34_create_sysfs(struct rmi_device *rmi_dev)
+{
+	return sysfs_create_group(&rmi_dev->dev.kobj, &rmi_firmware_attr_group);
+}
+
+void rmi_f34_remove_sysfs(struct rmi_device *rmi_dev)
+{
+	sysfs_remove_group(&rmi_dev->dev.kobj, &rmi_firmware_attr_group);
+}
+
+struct rmi_function_handler rmi_f34_handler = {
+	.driver = {
+		.name = "rmi4_f34",
+	},
+	.func = 0x34,
+	.probe = rmi_f34_probe,
+	.attention = rmi_f34_attention,
+};
diff --git a/drivers/input/rmi4/rmi_f34.h b/drivers/input/rmi4/rmi_f34.h
new file mode 100644
index 000000000000..2c21056dc375
--- /dev/null
+++ b/drivers/input/rmi4/rmi_f34.h
@@ -0,0 +1,314 @@
+/*
+ * Copyright (c) 2007-2016, Synaptics Incorporated
+ * Copyright (C) 2016 Zodiac Inflight Innovations
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef _RMI_F34_H
+#define _RMI_F34_H
+
+/* F34 image file offsets. */
+#define F34_FW_IMAGE_OFFSET	0x100
+
+/* F34 register offsets. */
+#define F34_BLOCK_DATA_OFFSET	2
+
+/* F34 commands */
+#define F34_WRITE_FW_BLOCK	0x2
+#define F34_ERASE_ALL		0x3
+#define F34_READ_CONFIG_BLOCK	0x5
+#define F34_WRITE_CONFIG_BLOCK	0x6
+#define F34_ERASE_CONFIG	0x7
+#define F34_ENABLE_FLASH_PROG	0xf
+
+#define F34_STATUS_IN_PROGRESS	0xff
+#define F34_STATUS_IDLE		0x80
+
+#define F34_IDLE_WAIT_MS	500
+#define F34_ENABLE_WAIT_MS	300
+#define F34_ERASE_WAIT_MS	5000
+
+#define F34_BOOTLOADER_ID_LEN	2
+
+/* F34 V7 defines */
+#define V7_FLASH_STATUS_OFFSET		0
+#define V7_PARTITION_ID_OFFSET		1
+#define V7_BLOCK_NUMBER_OFFSET		2
+#define V7_TRANSFER_LENGTH_OFFSET	3
+#define V7_COMMAND_OFFSET		4
+#define V7_PAYLOAD_OFFSET		5
+#define V7_BOOTLOADER_ID_OFFSET		1
+
+#define IMAGE_HEADER_VERSION_10		0x10
+
+#define CONFIG_ID_SIZE			32
+#define PRODUCT_ID_SIZE			10
+
+#define ENABLE_WAIT_MS			(1 * 1000)
+#define WRITE_WAIT_MS			(3 * 1000)
+
+#define MIN_SLEEP_TIME_US		50
+#define MAX_SLEEP_TIME_US		100
+
+#define HAS_BSR				BIT(5)
+#define HAS_CONFIG_ID			BIT(3)
+#define HAS_GUEST_CODE			BIT(6)
+#define HAS_DISP_CFG			BIT(5)
+
+/* F34 V7 commands */
+#define CMD_V7_IDLE			0
+#define CMD_V7_ENTER_BL			1
+#define CMD_V7_READ			2
+#define CMD_V7_WRITE			3
+#define CMD_V7_ERASE			4
+#define CMD_V7_ERASE_AP			5
+#define CMD_V7_SENSOR_ID		6
+
+#define v7_CMD_IDLE			0
+#define v7_CMD_WRITE_FW			1
+#define v7_CMD_WRITE_CONFIG		2
+#define v7_CMD_WRITE_LOCKDOWN		3
+#define v7_CMD_WRITE_GUEST_CODE		4
+#define v7_CMD_READ_CONFIG		5
+#define v7_CMD_ERASE_ALL		6
+#define v7_CMD_ERASE_UI_FIRMWARE	7
+#define v7_CMD_ERASE_UI_CONFIG		8
+#define v7_CMD_ERASE_BL_CONFIG		9
+#define v7_CMD_ERASE_DISP_CONFIG	10
+#define v7_CMD_ERASE_FLASH_CONFIG	11
+#define v7_CMD_ERASE_GUEST_CODE		12
+#define v7_CMD_ENABLE_FLASH_PROG	13
+
+#define v7_UI_CONFIG_AREA		0
+#define v7_PM_CONFIG_AREA		1
+#define v7_BL_CONFIG_AREA		2
+#define v7_DP_CONFIG_AREA		3
+#define v7_FLASH_CONFIG_AREA		4
+
+/* F34 V7 partition IDs */
+#define BOOTLOADER_PARTITION		1
+#define DEVICE_CONFIG_PARTITION		2
+#define FLASH_CONFIG_PARTITION		3
+#define MANUFACTURING_BLOCK_PARTITION	4
+#define GUEST_SERIALIZATION_PARTITION	5
+#define GLOBAL_PARAMETERS_PARTITION	6
+#define CORE_CODE_PARTITION		7
+#define CORE_CONFIG_PARTITION		8
+#define GUEST_CODE_PARTITION		9
+#define DISPLAY_CONFIG_PARTITION	10
+
+/* F34 V7 container IDs */
+#define TOP_LEVEL_CONTAINER			0
+#define UI_CONTAINER				1
+#define UI_CONFIG_CONTAINER			2
+#define BL_CONTAINER				3
+#define BL_IMAGE_CONTAINER			4
+#define BL_CONFIG_CONTAINER			5
+#define BL_LOCKDOWN_INFO_CONTAINER		6
+#define PERMANENT_CONFIG_CONTAINER		7
+#define GUEST_CODE_CONTAINER			8
+#define BL_PROTOCOL_DESCRIPTOR_CONTAINER	9
+#define UI_PROTOCOL_DESCRIPTOR_CONTAINER	10
+#define RMI_SELF_DISCOVERY_CONTAINER		11
+#define RMI_PAGE_CONTENT_CONTAINER		12
+#define GENERAL_INFORMATION_CONTAINER		13
+#define DEVICE_CONFIG_CONTAINER			14
+#define FLASH_CONFIG_CONTAINER			15
+#define GUEST_SERIALIZATION_CONTAINER		16
+#define GLOBAL_PARAMETERS_CONTAINER		17
+#define CORE_CODE_CONTAINER			18
+#define CORE_CONFIG_CONTAINER			19
+#define DISPLAY_CONFIG_CONTAINER		20
+
+struct f34v7_query_1_7 {
+	u8 bl_minor_revision;			/* query 1 */
+	u8 bl_major_revision;
+	__le32 bl_fw_id;			/* query 2 */
+	u8 minimum_write_size;			/* query 3 */
+	__le16 block_size;
+	__le16 flash_page_size;
+	__le16 adjustable_partition_area_size;	/* query 4 */
+	__le16 flash_config_length;		/* query 5 */
+	__le16 payload_length;			/* query 6 */
+	u8 partition_support[4];		/* query 7 */
+} __packed;
+
+struct f34v7_data_1_5 {
+	u8 partition_id;
+	__le16 block_offset;
+	__le16 transfer_length;
+	u8 command;
+	u8 payload[2];
+} __packed;
+
+struct block_data {
+	const void *data;
+	int size;
+};
+
+struct partition_table {
+	u8 partition_id;
+	u8 byte_1_reserved;
+	__le16 partition_length;
+	__le16 start_physical_address;
+	__le16 partition_properties;
+} __packed;
+
+struct physical_address {
+	u16 ui_firmware;
+	u16 ui_config;
+	u16 dp_config;
+	u16 guest_code;
+};
+
+struct container_descriptor {
+	__le32 content_checksum;
+	__le16 container_id;
+	u8 minor_version;
+	u8 major_version;
+	u8 reserved_08;
+	u8 reserved_09;
+	u8 reserved_0a;
+	u8 reserved_0b;
+	u8 container_option_flags[4];
+	__le32 content_options_length;
+	__le32 content_options_address;
+	__le32 content_length;
+	__le32 content_address;
+} __packed;
+
+struct block_count {
+	u16 ui_firmware;
+	u16 ui_config;
+	u16 dp_config;
+	u16 fl_config;
+	u16 pm_config;
+	u16 bl_config;
+	u16 lockdown;
+	u16 guest_code;
+};
+
+struct image_header_10 {
+	__le32 checksum;
+	u8 reserved_04;
+	u8 reserved_05;
+	u8 minor_header_version;
+	u8 major_header_version;
+	u8 reserved_08;
+	u8 reserved_09;
+	u8 reserved_0a;
+	u8 reserved_0b;
+	__le32 top_level_container_start_addr;
+};
+
+struct image_metadata {
+	bool contains_firmware_id;
+	bool contains_bootloader;
+	bool contains_display_cfg;
+	bool contains_guest_code;
+	bool contains_flash_config;
+	unsigned int firmware_id;
+	unsigned int checksum;
+	unsigned int bootloader_size;
+	unsigned int display_cfg_offset;
+	unsigned char bl_version;
+	unsigned char product_id[PRODUCT_ID_SIZE + 1];
+	unsigned char cstmr_product_id[PRODUCT_ID_SIZE + 1];
+	struct block_data bootloader;
+	struct block_data ui_firmware;
+	struct block_data ui_config;
+	struct block_data dp_config;
+	struct block_data fl_config;
+	struct block_data bl_config;
+	struct block_data guest_code;
+	struct block_data lockdown;
+	struct block_count blkcount;
+	struct physical_address phyaddr;
+};
+
+struct register_offset {
+	u8 properties;
+	u8 properties_2;
+	u8 block_size;
+	u8 block_count;
+	u8 gc_block_count;
+	u8 flash_status;
+	u8 partition_id;
+	u8 block_number;
+	u8 transfer_length;
+	u8 flash_cmd;
+	u8 payload;
+};
+
+struct rmi_f34_firmware {
+	__le32 checksum;
+	u8 pad1[3];
+	u8 bootloader_version;
+	__le32 image_size;
+	__le32 config_size;
+	u8 product_id[10];
+	u8 product_info[2];
+	u8 pad2[228];
+	u8 data[];
+};
+
+struct f34v5_data {
+	u16 block_size;
+	u16 fw_blocks;
+	u16 config_blocks;
+	u16 ctrl_address;
+	u8 status;
+
+	struct completion cmd_done;
+	struct mutex flash_mutex;
+};
+
+struct f34v7_data {
+	bool has_display_cfg;
+	bool has_guest_code;
+	bool force_update;
+	bool in_bl_mode;
+	u8 *read_config_buf;
+	size_t read_config_buf_size;
+	u8 command;
+	u8 flash_status;
+	u16 block_size;
+	u16 config_block_count;
+	u16 config_size;
+	u16 config_area;
+	u16 flash_config_length;
+	u16 payload_length;
+	u8 partitions;
+	u16 partition_table_bytes;
+	bool new_partition_table;
+
+	struct register_offset off;
+	struct block_count blkcount;
+	struct physical_address phyaddr;
+	struct image_metadata img;
+
+	const void *config_data;
+	const void *image;
+};
+
+struct f34_data {
+	struct rmi_function *fn;
+
+	u8 bl_version;
+	unsigned char bootloader_id[5];
+	unsigned char configuration_id[CONFIG_ID_SIZE*2 + 1];
+
+	union {
+		struct f34v5_data v5;
+		struct f34v7_data v7;
+	};
+};
+
+int rmi_f34v7_start_reflash(struct f34_data *f34, const struct firmware *fw);
+int rmi_f34v7_do_reflash(struct f34_data *f34, const struct firmware *fw);
+int rmi_f34v7_probe(struct f34_data *f34);
+
+#endif /* _RMI_F34_H */
diff --git a/drivers/input/rmi4/rmi_f34v7.c b/drivers/input/rmi4/rmi_f34v7.c
new file mode 100644
index 000000000000..ca31f9539d9b
--- /dev/null
+++ b/drivers/input/rmi4/rmi_f34v7.c
@@ -0,0 +1,1372 @@
+/*
+ * Copyright (c) 2016, Zodiac Inflight Innovations
+ * Copyright (c) 2007-2016, Synaptics Incorporated
+ * Copyright (C) 2012 Alexandra Chin <alexandra.chin@tw.synaptics.com>
+ * Copyright (C) 2012 Scott Lin <scott.lin@tw.synaptics.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/rmi.h>
+#include <linux/firmware.h>
+#include <asm/unaligned.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+
+#include "rmi_driver.h"
+#include "rmi_f34.h"
+
+static int rmi_f34v7_read_flash_status(struct f34_data *f34)
+{
+	u8 status;
+	u8 command;
+	int ret;
+
+	ret = rmi_read_block(f34->fn->rmi_dev,
+			f34->fn->fd.data_base_addr + f34->v7.off.flash_status,
+			&status,
+			sizeof(status));
+	if (ret < 0) {
+		rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev,
+			"%s: Failed to read flash status\n", __func__);
+		return ret;
+	}
+
+	f34->v7.in_bl_mode = status >> 7;
+	f34->v7.flash_status = status & 0x1f;
+
+	if (f34->v7.flash_status != 0x00) {
+		dev_err(&f34->fn->dev, "%s: status=%d, command=0x%02x\n",
+			__func__, f34->v7.flash_status, f34->v7.command);
+	}
+
+	ret = rmi_read_block(f34->fn->rmi_dev,
+			f34->fn->fd.data_base_addr + f34->v7.off.flash_cmd,
+			&command,
+			sizeof(command));
+	if (ret < 0) {
+		dev_err(&f34->fn->dev, "%s: Failed to read flash command\n",
+			__func__);
+		return ret;
+	}
+
+	f34->v7.command = command;
+
+	return 0;
+}
+
+static int rmi_f34v7_wait_for_idle(struct f34_data *f34, int timeout_ms)
+{
+	int count = 0;
+	int timeout_count = ((timeout_ms * 1000) / MAX_SLEEP_TIME_US) + 1;
+
+	do {
+		usleep_range(MIN_SLEEP_TIME_US, MAX_SLEEP_TIME_US);
+
+		count++;
+
+		rmi_f34v7_read_flash_status(f34);
+
+		if ((f34->v7.command == v7_CMD_IDLE)
+		    && (f34->v7.flash_status == 0x00)) {
+			rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev,
+				"Idle status detected\n");
+			return 0;
+		}
+	} while (count < timeout_count);
+
+	dev_err(&f34->fn->dev,
+		"%s: Timed out waiting for idle status\n", __func__);
+
+	return -ETIMEDOUT;
+}
+
+static int rmi_f34v7_write_command_single_transaction(struct f34_data *f34,
+						      u8 cmd)
+{
+	int ret;
+	u8 base;
+	struct f34v7_data_1_5 data_1_5;
+
+	base = f34->fn->fd.data_base_addr;
+
+	memset(&data_1_5, 0, sizeof(data_1_5));
+
+	switch (cmd) {
+	case v7_CMD_ERASE_ALL:
+		data_1_5.partition_id = CORE_CODE_PARTITION;
+		data_1_5.command = CMD_V7_ERASE_AP;
+		break;
+	case v7_CMD_ERASE_UI_FIRMWARE:
+		data_1_5.partition_id = CORE_CODE_PARTITION;
+		data_1_5.command = CMD_V7_ERASE;
+		break;
+	case v7_CMD_ERASE_BL_CONFIG:
+		data_1_5.partition_id = GLOBAL_PARAMETERS_PARTITION;
+		data_1_5.command = CMD_V7_ERASE;
+		break;
+	case v7_CMD_ERASE_UI_CONFIG:
+		data_1_5.partition_id = CORE_CONFIG_PARTITION;
+		data_1_5.command = CMD_V7_ERASE;
+		break;
+	case v7_CMD_ERASE_DISP_CONFIG:
+		data_1_5.partition_id = DISPLAY_CONFIG_PARTITION;
+		data_1_5.command = CMD_V7_ERASE;
+		break;
+	case v7_CMD_ERASE_FLASH_CONFIG:
+		data_1_5.partition_id = FLASH_CONFIG_PARTITION;
+		data_1_5.command = CMD_V7_ERASE;
+		break;
+	case v7_CMD_ERASE_GUEST_CODE:
+		data_1_5.partition_id = GUEST_CODE_PARTITION;
+		data_1_5.command = CMD_V7_ERASE;
+		break;
+	case v7_CMD_ENABLE_FLASH_PROG:
+		data_1_5.partition_id = BOOTLOADER_PARTITION;
+		data_1_5.command = CMD_V7_ENTER_BL;
+		break;
+	}
+
+	data_1_5.payload[0] = f34->bootloader_id[0];
+	data_1_5.payload[1] = f34->bootloader_id[1];
+
+	ret = rmi_write_block(f34->fn->rmi_dev,
+			base + f34->v7.off.partition_id,
+			&data_1_5, sizeof(data_1_5));
+	if (ret < 0) {
+		dev_err(&f34->fn->dev,
+			"%s: Failed to write single transaction command\n",
+			__func__);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rmi_f34v7_write_command(struct f34_data *f34, u8 cmd)
+{
+	int ret;
+	u8 base;
+	u8 command;
+
+	base = f34->fn->fd.data_base_addr;
+
+	switch (cmd) {
+	case v7_CMD_WRITE_FW:
+	case v7_CMD_WRITE_CONFIG:
+	case v7_CMD_WRITE_GUEST_CODE:
+		command = CMD_V7_WRITE;
+		break;
+	case v7_CMD_READ_CONFIG:
+		command = CMD_V7_READ;
+		break;
+	case v7_CMD_ERASE_ALL:
+		command = CMD_V7_ERASE_AP;
+		break;
+	case v7_CMD_ERASE_UI_FIRMWARE:
+	case v7_CMD_ERASE_BL_CONFIG:
+	case v7_CMD_ERASE_UI_CONFIG:
+	case v7_CMD_ERASE_DISP_CONFIG:
+	case v7_CMD_ERASE_FLASH_CONFIG:
+	case v7_CMD_ERASE_GUEST_CODE:
+		command = CMD_V7_ERASE;
+		break;
+	case v7_CMD_ENABLE_FLASH_PROG:
+		command = CMD_V7_ENTER_BL;
+		break;
+	default:
+		dev_err(&f34->fn->dev, "%s: Invalid command 0x%02x\n",
+			__func__, cmd);
+		return -EINVAL;
+	}
+
+	f34->v7.command = command;
+
+	switch (cmd) {
+	case v7_CMD_ERASE_ALL:
+	case v7_CMD_ERASE_UI_FIRMWARE:
+	case v7_CMD_ERASE_BL_CONFIG:
+	case v7_CMD_ERASE_UI_CONFIG:
+	case v7_CMD_ERASE_DISP_CONFIG:
+	case v7_CMD_ERASE_FLASH_CONFIG:
+	case v7_CMD_ERASE_GUEST_CODE:
+	case v7_CMD_ENABLE_FLASH_PROG:
+		ret = rmi_f34v7_write_command_single_transaction(f34, cmd);
+		if (ret < 0)
+			return ret;
+		else
+			return 0;
+	default:
+		break;
+	}
+
+	rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev, "%s: writing cmd %02X\n",
+		__func__, command);
+
+	ret = rmi_write_block(f34->fn->rmi_dev,
+			base + f34->v7.off.flash_cmd,
+			&command, sizeof(command));
+	if (ret < 0) {
+		dev_err(&f34->fn->dev, "%s: Failed to write flash command\n",
+			__func__);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rmi_f34v7_write_partition_id(struct f34_data *f34, u8 cmd)
+{
+	int ret;
+	u8 base;
+	u8 partition;
+
+	base = f34->fn->fd.data_base_addr;
+
+	switch (cmd) {
+	case v7_CMD_WRITE_FW:
+		partition = CORE_CODE_PARTITION;
+		break;
+	case v7_CMD_WRITE_CONFIG:
+	case v7_CMD_READ_CONFIG:
+		if (f34->v7.config_area == v7_UI_CONFIG_AREA)
+			partition = CORE_CONFIG_PARTITION;
+		else if (f34->v7.config_area == v7_DP_CONFIG_AREA)
+			partition = DISPLAY_CONFIG_PARTITION;
+		else if (f34->v7.config_area == v7_PM_CONFIG_AREA)
+			partition = GUEST_SERIALIZATION_PARTITION;
+		else if (f34->v7.config_area == v7_BL_CONFIG_AREA)
+			partition = GLOBAL_PARAMETERS_PARTITION;
+		else if (f34->v7.config_area == v7_FLASH_CONFIG_AREA)
+			partition = FLASH_CONFIG_PARTITION;
+		break;
+	case v7_CMD_WRITE_GUEST_CODE:
+		partition = GUEST_CODE_PARTITION;
+		break;
+	case v7_CMD_ERASE_ALL:
+		partition = CORE_CODE_PARTITION;
+		break;
+	case v7_CMD_ERASE_BL_CONFIG:
+		partition = GLOBAL_PARAMETERS_PARTITION;
+		break;
+	case v7_CMD_ERASE_UI_CONFIG:
+		partition = CORE_CONFIG_PARTITION;
+		break;
+	case v7_CMD_ERASE_DISP_CONFIG:
+		partition = DISPLAY_CONFIG_PARTITION;
+		break;
+	case v7_CMD_ERASE_FLASH_CONFIG:
+		partition = FLASH_CONFIG_PARTITION;
+		break;
+	case v7_CMD_ERASE_GUEST_CODE:
+		partition = GUEST_CODE_PARTITION;
+		break;
+	case v7_CMD_ENABLE_FLASH_PROG:
+		partition = BOOTLOADER_PARTITION;
+		break;
+	default:
+		dev_err(&f34->fn->dev, "%s: Invalid command 0x%02x\n",
+			__func__, cmd);
+		return -EINVAL;
+	}
+
+	ret = rmi_write_block(f34->fn->rmi_dev,
+			base + f34->v7.off.partition_id,
+			&partition, sizeof(partition));
+	if (ret < 0) {
+		dev_err(&f34->fn->dev, "%s: Failed to write partition ID\n",
+			__func__);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rmi_f34v7_read_f34v7_partition_table(struct f34_data *f34)
+{
+	int ret;
+	u8 base;
+	__le16 length;
+	u16 block_number = 0;
+
+	base = f34->fn->fd.data_base_addr;
+
+	f34->v7.config_area = v7_FLASH_CONFIG_AREA;
+
+	ret = rmi_f34v7_write_partition_id(f34, v7_CMD_READ_CONFIG);
+	if (ret < 0)
+		return ret;
+
+	ret = rmi_write_block(f34->fn->rmi_dev,
+			base + f34->v7.off.block_number,
+			&block_number, sizeof(block_number));
+	if (ret < 0) {
+		dev_err(&f34->fn->dev, "%s: Failed to write block number\n",
+			__func__);
+		return ret;
+	}
+
+	put_unaligned_le16(f34->v7.flash_config_length, &length);
+
+	ret = rmi_write_block(f34->fn->rmi_dev,
+			base + f34->v7.off.transfer_length,
+			&length, sizeof(length));
+	if (ret < 0) {
+		dev_err(&f34->fn->dev, "%s: Failed to write transfer length\n",
+			__func__);
+		return ret;
+	}
+
+	ret = rmi_f34v7_write_command(f34, v7_CMD_READ_CONFIG);
+	if (ret < 0) {
+		dev_err(&f34->fn->dev, "%s: Failed to write command\n",
+			__func__);
+		return ret;
+	}
+
+	ret = rmi_f34v7_wait_for_idle(f34, WRITE_WAIT_MS);
+	if (ret < 0) {
+		dev_err(&f34->fn->dev, "%s: Failed to wait for idle status\n",
+			__func__);
+		return ret;
+	}
+
+	ret = rmi_read_block(f34->fn->rmi_dev,
+			base + f34->v7.off.payload,
+			f34->v7.read_config_buf,
+			f34->v7.partition_table_bytes);
+	if (ret < 0) {
+		dev_err(&f34->fn->dev, "%s: Failed to read block data\n",
+			__func__);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void rmi_f34v7_parse_partition_table(struct f34_data *f34,
+					    const void *partition_table,
+					    struct block_count *blkcount,
+					    struct physical_address *phyaddr)
+{
+	int i;
+	int index;
+	u16 partition_length;
+	u16 physical_address;
+	const struct partition_table *ptable;
+
+	for (i = 0; i < f34->v7.partitions; i++) {
+		index = i * 8 + 2;
+		ptable = partition_table + index;
+		partition_length = le16_to_cpu(ptable->partition_length);
+		physical_address = le16_to_cpu(ptable->start_physical_address);
+		rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev,
+			"%s: Partition entry %d: %*ph\n",
+			__func__, i, sizeof(struct partition_table), ptable);
+		switch (ptable->partition_id & 0x1f) {
+		case CORE_CODE_PARTITION:
+			blkcount->ui_firmware = partition_length;
+			phyaddr->ui_firmware = physical_address;
+			rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev,
+				"%s: Core code block count: %d\n",
+				__func__, blkcount->ui_firmware);
+			break;
+		case CORE_CONFIG_PARTITION:
+			blkcount->ui_config = partition_length;
+			phyaddr->ui_config = physical_address;
+			rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev,
+				"%s: Core config block count: %d\n",
+				__func__, blkcount->ui_config);
+			break;
+		case DISPLAY_CONFIG_PARTITION:
+			blkcount->dp_config = partition_length;
+			phyaddr->dp_config = physical_address;
+			rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev,
+				"%s: Display config block count: %d\n",
+				__func__, blkcount->dp_config);
+			break;
+		case FLASH_CONFIG_PARTITION:
+			blkcount->fl_config = partition_length;
+			rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev,
+				"%s: Flash config block count: %d\n",
+				__func__, blkcount->fl_config);
+			break;
+		case GUEST_CODE_PARTITION:
+			blkcount->guest_code = partition_length;
+			phyaddr->guest_code = physical_address;
+			rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev,
+				"%s: Guest code block count: %d\n",
+				__func__, blkcount->guest_code);
+			break;
+		case GUEST_SERIALIZATION_PARTITION:
+			blkcount->pm_config = partition_length;
+			rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev,
+				"%s: Guest serialization block count: %d\n",
+				__func__, blkcount->pm_config);
+			break;
+		case GLOBAL_PARAMETERS_PARTITION:
+			blkcount->bl_config = partition_length;
+			rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev,
+				"%s: Global parameters block count: %d\n",
+				__func__, blkcount->bl_config);
+			break;
+		case DEVICE_CONFIG_PARTITION:
+			blkcount->lockdown = partition_length;
+			rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev,
+				"%s: Device config block count: %d\n",
+				__func__, blkcount->lockdown);
+			break;
+		}
+	}
+}
+
+static int rmi_f34v7_read_queries_bl_version(struct f34_data *f34)
+{
+	int ret;
+	u8 base;
+	int offset;
+	u8 query_0;
+	struct f34v7_query_1_7 query_1_7;
+
+	base = f34->fn->fd.query_base_addr;
+
+	ret = rmi_read_block(f34->fn->rmi_dev,
+			base,
+			&query_0,
+			sizeof(query_0));
+	if (ret < 0) {
+		dev_err(&f34->fn->dev,
+			"%s: Failed to read query 0\n", __func__);
+		return ret;
+	}
+
+	offset = (query_0 & 0x7) + 1;
+
+	ret = rmi_read_block(f34->fn->rmi_dev,
+			base + offset,
+			&query_1_7,
+			sizeof(query_1_7));
+	if (ret < 0) {
+		dev_err(&f34->fn->dev, "%s: Failed to read queries 1 to 7\n",
+			__func__);
+		return ret;
+	}
+
+	f34->bootloader_id[0] = query_1_7.bl_minor_revision;
+	f34->bootloader_id[1] = query_1_7.bl_major_revision;
+
+	rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev, "Bootloader V%d.%d\n",
+		f34->bootloader_id[1], f34->bootloader_id[0]);
+
+	return 0;
+}
+
+static int rmi_f34v7_read_queries(struct f34_data *f34)
+{
+	int ret;
+	int i, j;
+	u8 base;
+	int offset;
+	u8 *ptable;
+	u8 query_0;
+	struct f34v7_query_1_7 query_1_7;
+
+	base = f34->fn->fd.query_base_addr;
+
+	ret = rmi_read_block(f34->fn->rmi_dev,
+			base,
+			&query_0,
+			sizeof(query_0));
+	if (ret < 0) {
+		dev_err(&f34->fn->dev,
+			"%s: Failed to read query 0\n", __func__);
+		return ret;
+	}
+
+	offset = (query_0 & 0x07) + 1;
+
+	ret = rmi_read_block(f34->fn->rmi_dev,
+			base + offset,
+			&query_1_7,
+			sizeof(query_1_7));
+	if (ret < 0) {
+		dev_err(&f34->fn->dev, "%s: Failed to read queries 1 to 7\n",
+			__func__);
+		return ret;
+	}
+
+	f34->bootloader_id[0] = query_1_7.bl_minor_revision;
+	f34->bootloader_id[1] = query_1_7.bl_major_revision;
+
+	f34->v7.block_size = le16_to_cpu(query_1_7.block_size);
+	f34->v7.flash_config_length =
+			le16_to_cpu(query_1_7.flash_config_length);
+	f34->v7.payload_length = le16_to_cpu(query_1_7.payload_length);
+
+	rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev, "%s: f34->v7.block_size = %d\n",
+		 __func__, f34->v7.block_size);
+
+	f34->v7.off.flash_status = V7_FLASH_STATUS_OFFSET;
+	f34->v7.off.partition_id = V7_PARTITION_ID_OFFSET;
+	f34->v7.off.block_number = V7_BLOCK_NUMBER_OFFSET;
+	f34->v7.off.transfer_length = V7_TRANSFER_LENGTH_OFFSET;
+	f34->v7.off.flash_cmd = V7_COMMAND_OFFSET;
+	f34->v7.off.payload = V7_PAYLOAD_OFFSET;
+
+	f34->v7.has_display_cfg = query_1_7.partition_support[1] & HAS_DISP_CFG;
+	f34->v7.has_guest_code =
+			query_1_7.partition_support[1] & HAS_GUEST_CODE;
+
+	if (query_0 & HAS_CONFIG_ID) {
+		char f34_ctrl[CONFIG_ID_SIZE];
+		int i = 0;
+		u8 *p = f34->configuration_id;
+		*p = '\0';
+
+		ret = rmi_read_block(f34->fn->rmi_dev,
+				f34->fn->fd.control_base_addr,
+				f34_ctrl,
+				sizeof(f34_ctrl));
+		if (ret)
+			return ret;
+
+		/* Eat leading zeros */
+		while (i < sizeof(f34_ctrl) && !f34_ctrl[i])
+			i++;
+
+		for (; i < sizeof(f34_ctrl); i++)
+			p += snprintf(p, f34->configuration_id
+				      + sizeof(f34->configuration_id) - p,
+				      "%02X", f34_ctrl[i]);
+
+		rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev, "Configuration ID: %s\n",
+			f34->configuration_id);
+	}
+
+	f34->v7.partitions = 0;
+	for (i = 0; i < sizeof(query_1_7.partition_support); i++)
+		for (j = 0; j < 8; j++)
+			if (query_1_7.partition_support[i] & (1 << j))
+				f34->v7.partitions++;
+
+	rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev, "%s: Supported partitions: %*ph\n",
+		__func__, sizeof(query_1_7.partition_support),
+		query_1_7.partition_support);
+
+
+	f34->v7.partition_table_bytes = f34->v7.partitions * 8 + 2;
+
+	f34->v7.read_config_buf = devm_kzalloc(&f34->fn->dev,
+			f34->v7.partition_table_bytes,
+			GFP_KERNEL);
+	if (!f34->v7.read_config_buf) {
+		f34->v7.read_config_buf_size = 0;
+		return -ENOMEM;
+	}
+
+	f34->v7.read_config_buf_size = f34->v7.partition_table_bytes;
+	ptable = f34->v7.read_config_buf;
+
+	ret = rmi_f34v7_read_f34v7_partition_table(f34);
+	if (ret < 0) {
+		dev_err(&f34->fn->dev, "%s: Failed to read partition table\n",
+				__func__);
+		return ret;
+	}
+
+	rmi_f34v7_parse_partition_table(f34, ptable,
+					&f34->v7.blkcount, &f34->v7.phyaddr);
+
+	return 0;
+}
+
+static int rmi_f34v7_check_ui_firmware_size(struct f34_data *f34)
+{
+	u16 block_count;
+
+	block_count = f34->v7.img.ui_firmware.size / f34->v7.block_size;
+
+	if (block_count != f34->v7.blkcount.ui_firmware) {
+		dev_err(&f34->fn->dev,
+			"UI firmware size mismatch: %d != %d\n",
+			block_count, f34->v7.blkcount.ui_firmware);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rmi_f34v7_check_ui_config_size(struct f34_data *f34)
+{
+	u16 block_count;
+
+	block_count = f34->v7.img.ui_config.size / f34->v7.block_size;
+
+	if (block_count != f34->v7.blkcount.ui_config) {
+		dev_err(&f34->fn->dev, "UI config size mismatch\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rmi_f34v7_check_dp_config_size(struct f34_data *f34)
+{
+	u16 block_count;
+
+	block_count = f34->v7.img.dp_config.size / f34->v7.block_size;
+
+	if (block_count != f34->v7.blkcount.dp_config) {
+		dev_err(&f34->fn->dev, "Display config size mismatch\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rmi_f34v7_check_guest_code_size(struct f34_data *f34)
+{
+	u16 block_count;
+
+	block_count = f34->v7.img.guest_code.size / f34->v7.block_size;
+	if (block_count != f34->v7.blkcount.guest_code) {
+		dev_err(&f34->fn->dev, "Guest code size mismatch\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rmi_f34v7_check_bl_config_size(struct f34_data *f34)
+{
+	u16 block_count;
+
+	block_count = f34->v7.img.bl_config.size / f34->v7.block_size;
+
+	if (block_count != f34->v7.blkcount.bl_config) {
+		dev_err(&f34->fn->dev, "Bootloader config size mismatch\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rmi_f34v7_erase_config(struct f34_data *f34)
+{
+	int ret;
+
+	dev_info(&f34->fn->dev, "Erasing config...\n");
+
+	switch (f34->v7.config_area) {
+	case v7_UI_CONFIG_AREA:
+		ret = rmi_f34v7_write_command(f34, v7_CMD_ERASE_UI_CONFIG);
+		if (ret < 0)
+			return ret;
+		break;
+	case v7_DP_CONFIG_AREA:
+		ret = rmi_f34v7_write_command(f34, v7_CMD_ERASE_DISP_CONFIG);
+		if (ret < 0)
+			return ret;
+		break;
+	case v7_BL_CONFIG_AREA:
+		ret = rmi_f34v7_write_command(f34, v7_CMD_ERASE_BL_CONFIG);
+		if (ret < 0)
+			return ret;
+		break;
+	}
+
+	ret = rmi_f34v7_wait_for_idle(f34, ENABLE_WAIT_MS);
+	if (ret < 0)
+		return ret;
+
+	return ret;
+}
+
+static int rmi_f34v7_erase_guest_code(struct f34_data *f34)
+{
+	int ret;
+
+	dev_info(&f34->fn->dev, "Erasing guest code...\n");
+
+	ret = rmi_f34v7_write_command(f34, v7_CMD_ERASE_GUEST_CODE);
+	if (ret < 0)
+		return ret;
+
+	ret = rmi_f34v7_wait_for_idle(f34, ENABLE_WAIT_MS);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int rmi_f34v7_erase_all(struct f34_data *f34)
+{
+	int ret;
+
+	dev_info(&f34->fn->dev, "Erasing firmware...\n");
+
+	ret = rmi_f34v7_write_command(f34, v7_CMD_ERASE_UI_FIRMWARE);
+	if (ret < 0)
+		return ret;
+
+	ret = rmi_f34v7_wait_for_idle(f34, ENABLE_WAIT_MS);
+	if (ret < 0)
+		return ret;
+
+	f34->v7.config_area = v7_UI_CONFIG_AREA;
+	ret = rmi_f34v7_erase_config(f34);
+	if (ret < 0)
+		return ret;
+
+	if (f34->v7.has_display_cfg) {
+		f34->v7.config_area = v7_DP_CONFIG_AREA;
+		ret = rmi_f34v7_erase_config(f34);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (f34->v7.new_partition_table && f34->v7.has_guest_code) {
+		ret = rmi_f34v7_erase_guest_code(f34);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int rmi_f34v7_read_f34v7_blocks(struct f34_data *f34, u16 block_cnt,
+				       u8 command)
+{
+	int ret;
+	u8 base;
+	__le16 length;
+	u16 transfer;
+	u16 max_transfer;
+	u16 remaining = block_cnt;
+	u16 block_number = 0;
+	u16 index = 0;
+
+	base = f34->fn->fd.data_base_addr;
+
+	ret = rmi_f34v7_write_partition_id(f34, command);
+	if (ret < 0)
+		return ret;
+
+	ret = rmi_write_block(f34->fn->rmi_dev,
+			base + f34->v7.off.block_number,
+			&block_number, sizeof(block_number));
+	if (ret < 0) {
+		dev_err(&f34->fn->dev, "%s: Failed to write block number\n",
+			__func__);
+		return ret;
+	}
+
+	max_transfer = min(f34->v7.payload_length,
+			   (u16)(PAGE_SIZE / f34->v7.block_size));
+
+	do {
+		transfer = min(remaining, max_transfer);
+		put_unaligned_le16(transfer, &length);
+
+		ret = rmi_write_block(f34->fn->rmi_dev,
+				base + f34->v7.off.transfer_length,
+				&length, sizeof(length));
+		if (ret < 0) {
+			dev_err(&f34->fn->dev,
+				"%s: Write transfer length fail (%d remaining)\n",
+				__func__, remaining);
+			return ret;
+		}
+
+		ret = rmi_f34v7_write_command(f34, command);
+		if (ret < 0)
+			return ret;
+
+		ret = rmi_f34v7_wait_for_idle(f34, ENABLE_WAIT_MS);
+		if (ret < 0) {
+			dev_err(&f34->fn->dev,
+				"%s: Wait for idle failed (%d blks remaining)\n",
+				__func__, remaining);
+			return ret;
+		}
+
+		ret = rmi_read_block(f34->fn->rmi_dev,
+				base + f34->v7.off.payload,
+				&f34->v7.read_config_buf[index],
+				transfer * f34->v7.block_size);
+		if (ret < 0) {
+			dev_err(&f34->fn->dev,
+				"%s: Read block failed (%d blks remaining)\n",
+				__func__, remaining);
+			return ret;
+		}
+
+		index += (transfer * f34->v7.block_size);
+		remaining -= transfer;
+	} while (remaining);
+
+	return 0;
+}
+
+static int rmi_f34v7_write_f34v7_blocks(struct f34_data *f34,
+					const void *block_ptr, u16 block_cnt,
+					u8 command)
+{
+	int ret;
+	u8 base;
+	__le16 length;
+	u16 transfer;
+	u16 max_transfer;
+	u16 remaining = block_cnt;
+	u16 block_number = 0;
+
+	base = f34->fn->fd.data_base_addr;
+
+	ret = rmi_f34v7_write_partition_id(f34, command);
+	if (ret < 0)
+		return ret;
+
+	ret = rmi_write_block(f34->fn->rmi_dev,
+			base + f34->v7.off.block_number,
+			&block_number, sizeof(block_number));
+	if (ret < 0) {
+		dev_err(&f34->fn->dev, "%s: Failed to write block number\n",
+			__func__);
+		return ret;
+	}
+
+	if (f34->v7.payload_length > (PAGE_SIZE / f34->v7.block_size))
+		max_transfer = PAGE_SIZE / f34->v7.block_size;
+	else
+		max_transfer = f34->v7.payload_length;
+
+	do {
+		transfer = min(remaining, max_transfer);
+		put_unaligned_le16(transfer, &length);
+
+		ret = rmi_write_block(f34->fn->rmi_dev,
+				base + f34->v7.off.transfer_length,
+				&length, sizeof(length));
+		if (ret < 0) {
+			dev_err(&f34->fn->dev,
+				"%s: Write transfer length fail (%d remaining)\n",
+				__func__, remaining);
+			return ret;
+		}
+
+		ret = rmi_f34v7_write_command(f34, command);
+		if (ret < 0)
+			return ret;
+
+		ret = rmi_write_block(f34->fn->rmi_dev,
+				base + f34->v7.off.payload,
+				block_ptr, transfer * f34->v7.block_size);
+		if (ret < 0) {
+			dev_err(&f34->fn->dev,
+				"%s: Failed writing data (%d blks remaining)\n",
+				__func__, remaining);
+			return ret;
+		}
+
+		ret = rmi_f34v7_wait_for_idle(f34, ENABLE_WAIT_MS);
+		if (ret < 0) {
+			dev_err(&f34->fn->dev,
+				"%s: Failed wait for idle (%d blks remaining)\n",
+				__func__, remaining);
+			return ret;
+		}
+
+		block_ptr += (transfer * f34->v7.block_size);
+		remaining -= transfer;
+	} while (remaining);
+
+	return 0;
+}
+
+static int rmi_f34v7_write_config(struct f34_data *f34)
+{
+	return rmi_f34v7_write_f34v7_blocks(f34, f34->v7.config_data,
+					    f34->v7.config_block_count,
+					    v7_CMD_WRITE_CONFIG);
+}
+
+static int rmi_f34v7_write_ui_config(struct f34_data *f34)
+{
+	f34->v7.config_area = v7_UI_CONFIG_AREA;
+	f34->v7.config_data = f34->v7.img.ui_config.data;
+	f34->v7.config_size = f34->v7.img.ui_config.size;
+	f34->v7.config_block_count = f34->v7.config_size / f34->v7.block_size;
+
+	return rmi_f34v7_write_config(f34);
+}
+
+static int rmi_f34v7_write_dp_config(struct f34_data *f34)
+{
+	f34->v7.config_area = v7_DP_CONFIG_AREA;
+	f34->v7.config_data = f34->v7.img.dp_config.data;
+	f34->v7.config_size = f34->v7.img.dp_config.size;
+	f34->v7.config_block_count = f34->v7.config_size / f34->v7.block_size;
+
+	return rmi_f34v7_write_config(f34);
+}
+
+static int rmi_f34v7_write_guest_code(struct f34_data *f34)
+{
+	return rmi_f34v7_write_f34v7_blocks(f34, f34->v7.img.guest_code.data,
+					    f34->v7.img.guest_code.size /
+							f34->v7.block_size,
+					    v7_CMD_WRITE_GUEST_CODE);
+}
+
+static int rmi_f34v7_write_flash_config(struct f34_data *f34)
+{
+	int ret;
+
+	f34->v7.config_area = v7_FLASH_CONFIG_AREA;
+	f34->v7.config_data = f34->v7.img.fl_config.data;
+	f34->v7.config_size = f34->v7.img.fl_config.size;
+	f34->v7.config_block_count = f34->v7.config_size / f34->v7.block_size;
+
+	if (f34->v7.config_block_count != f34->v7.blkcount.fl_config) {
+		dev_err(&f34->fn->dev, "%s: Flash config size mismatch\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	ret = rmi_f34v7_write_command(f34, v7_CMD_ERASE_FLASH_CONFIG);
+	if (ret < 0)
+		return ret;
+
+	rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev,
+		"%s: Erase flash config command written\n", __func__);
+
+	ret = rmi_f34v7_wait_for_idle(f34, ENABLE_WAIT_MS);
+	if (ret < 0)
+		return ret;
+
+	ret = rmi_f34v7_write_config(f34);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int rmi_f34v7_write_partition_table(struct f34_data *f34)
+{
+	u16 block_count;
+	int ret;
+
+	block_count = f34->v7.blkcount.bl_config;
+	f34->v7.config_area = v7_BL_CONFIG_AREA;
+	f34->v7.config_size = f34->v7.block_size * block_count;
+	devm_kfree(&f34->fn->dev, f34->v7.read_config_buf);
+	f34->v7.read_config_buf = devm_kzalloc(&f34->fn->dev,
+					       f34->v7.config_size, GFP_KERNEL);
+	if (!f34->v7.read_config_buf) {
+		f34->v7.read_config_buf_size = 0;
+		return -ENOMEM;
+	}
+
+	f34->v7.read_config_buf_size = f34->v7.config_size;
+
+	ret = rmi_f34v7_read_f34v7_blocks(f34, block_count, v7_CMD_READ_CONFIG);
+	if (ret < 0)
+		return ret;
+
+	ret = rmi_f34v7_erase_config(f34);
+	if (ret < 0)
+		return ret;
+
+	ret = rmi_f34v7_write_flash_config(f34);
+	if (ret < 0)
+		return ret;
+
+	f34->v7.config_area = v7_BL_CONFIG_AREA;
+	f34->v7.config_data = f34->v7.read_config_buf;
+	f34->v7.config_size = f34->v7.img.bl_config.size;
+	f34->v7.config_block_count = f34->v7.config_size / f34->v7.block_size;
+
+	ret = rmi_f34v7_write_config(f34);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int rmi_f34v7_write_firmware(struct f34_data *f34)
+{
+	u16 blk_count;
+
+	blk_count = f34->v7.img.ui_firmware.size / f34->v7.block_size;
+
+	return rmi_f34v7_write_f34v7_blocks(f34, f34->v7.img.ui_firmware.data,
+					    blk_count, v7_CMD_WRITE_FW);
+}
+
+static void rmi_f34v7_compare_partition_tables(struct f34_data *f34)
+{
+	if (f34->v7.phyaddr.ui_firmware != f34->v7.img.phyaddr.ui_firmware) {
+		f34->v7.new_partition_table = true;
+		return;
+	}
+
+	if (f34->v7.phyaddr.ui_config != f34->v7.img.phyaddr.ui_config) {
+		f34->v7.new_partition_table = true;
+		return;
+	}
+
+	if (f34->v7.has_display_cfg &&
+	    f34->v7.phyaddr.dp_config != f34->v7.img.phyaddr.dp_config) {
+		f34->v7.new_partition_table = true;
+		return;
+	}
+
+	if (f34->v7.has_guest_code &&
+	    f34->v7.phyaddr.guest_code != f34->v7.img.phyaddr.guest_code) {
+		f34->v7.new_partition_table = true;
+		return;
+	}
+
+	f34->v7.new_partition_table = false;
+}
+
+static void rmi_f34v7_parse_img_header_10_bl_container(struct f34_data *f34,
+						       const void *image)
+{
+	int i;
+	int num_of_containers;
+	unsigned int addr;
+	unsigned int container_id;
+	unsigned int length;
+	const void *content;
+	const struct container_descriptor *descriptor;
+
+	num_of_containers = f34->v7.img.bootloader.size / 4 - 1;
+
+	for (i = 1; i <= num_of_containers; i++) {
+		addr = get_unaligned_le32(f34->v7.img.bootloader.data + i * 4);
+		descriptor = image + addr;
+		container_id = le16_to_cpu(descriptor->container_id);
+		content = image + le32_to_cpu(descriptor->content_address);
+		length = le32_to_cpu(descriptor->content_length);
+		switch (container_id) {
+		case BL_CONFIG_CONTAINER:
+		case GLOBAL_PARAMETERS_CONTAINER:
+			f34->v7.img.bl_config.data = content;
+			f34->v7.img.bl_config.size = length;
+			break;
+		case BL_LOCKDOWN_INFO_CONTAINER:
+		case DEVICE_CONFIG_CONTAINER:
+			f34->v7.img.lockdown.data = content;
+			f34->v7.img.lockdown.size = length;
+			break;
+		default:
+			break;
+		}
+	}
+}
+
+static void rmi_f34v7_parse_image_header_10(struct f34_data *f34)
+{
+	unsigned int i;
+	unsigned int num_of_containers;
+	unsigned int addr;
+	unsigned int offset;
+	unsigned int container_id;
+	unsigned int length;
+	const void *image = f34->v7.image;
+	const u8 *content;
+	const struct container_descriptor *descriptor;
+	const struct image_header_10 *header = image;
+
+	f34->v7.img.checksum = le32_to_cpu(header->checksum);
+
+	rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev, "%s: f34->v7.img.checksum=%X\n",
+		__func__, f34->v7.img.checksum);
+
+	/* address of top level container */
+	offset = le32_to_cpu(header->top_level_container_start_addr);
+	descriptor = image + offset;
+
+	/* address of top level container content */
+	offset = le32_to_cpu(descriptor->content_address);
+	num_of_containers = le32_to_cpu(descriptor->content_length) / 4;
+
+	for (i = 0; i < num_of_containers; i++) {
+		addr = get_unaligned_le32(image + offset);
+		offset += 4;
+		descriptor = image + addr;
+		container_id = le16_to_cpu(descriptor->container_id);
+		content = image + le32_to_cpu(descriptor->content_address);
+		length = le32_to_cpu(descriptor->content_length);
+
+		rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev,
+			"%s: container_id=%d, length=%d\n", __func__,
+			container_id, length);
+
+		switch (container_id) {
+		case UI_CONTAINER:
+		case CORE_CODE_CONTAINER:
+			f34->v7.img.ui_firmware.data = content;
+			f34->v7.img.ui_firmware.size = length;
+			break;
+		case UI_CONFIG_CONTAINER:
+		case CORE_CONFIG_CONTAINER:
+			f34->v7.img.ui_config.data = content;
+			f34->v7.img.ui_config.size = length;
+			break;
+		case BL_CONTAINER:
+			f34->v7.img.bl_version = *content;
+			f34->v7.img.bootloader.data = content;
+			f34->v7.img.bootloader.size = length;
+			rmi_f34v7_parse_img_header_10_bl_container(f34, image);
+			break;
+		case GUEST_CODE_CONTAINER:
+			f34->v7.img.contains_guest_code = true;
+			f34->v7.img.guest_code.data = content;
+			f34->v7.img.guest_code.size = length;
+			break;
+		case DISPLAY_CONFIG_CONTAINER:
+			f34->v7.img.contains_display_cfg = true;
+			f34->v7.img.dp_config.data = content;
+			f34->v7.img.dp_config.size = length;
+			break;
+		case FLASH_CONFIG_CONTAINER:
+			f34->v7.img.contains_flash_config = true;
+			f34->v7.img.fl_config.data = content;
+			f34->v7.img.fl_config.size = length;
+			break;
+		case GENERAL_INFORMATION_CONTAINER:
+			f34->v7.img.contains_firmware_id = true;
+			f34->v7.img.firmware_id =
+				get_unaligned_le32(content + 4);
+			break;
+		default:
+			break;
+		}
+	}
+}
+
+static int rmi_f34v7_parse_image_info(struct f34_data *f34)
+{
+	const struct image_header_10 *header = f34->v7.image;
+
+	memset(&f34->v7.img, 0x00, sizeof(f34->v7.img));
+
+	rmi_dbg(RMI_DEBUG_FN, &f34->fn->dev,
+		"%s: header->major_header_version = %d\n",
+		__func__, header->major_header_version);
+
+	switch (header->major_header_version) {
+	case IMAGE_HEADER_VERSION_10:
+		rmi_f34v7_parse_image_header_10(f34);
+		break;
+	default:
+		dev_err(&f34->fn->dev, "Unsupported image file format %02X\n",
+			header->major_header_version);
+		return -EINVAL;
+	}
+
+	if (!f34->v7.img.contains_flash_config) {
+		dev_err(&f34->fn->dev, "%s: No flash config in fw image\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	rmi_f34v7_parse_partition_table(f34, f34->v7.img.fl_config.data,
+			&f34->v7.img.blkcount, &f34->v7.img.phyaddr);
+
+	rmi_f34v7_compare_partition_tables(f34);
+
+	return 0;
+}
+
+int rmi_f34v7_do_reflash(struct f34_data *f34, const struct firmware *fw)
+{
+	int ret;
+
+	rmi_f34v7_read_queries_bl_version(f34);
+
+	f34->v7.image = fw->data;
+
+	ret = rmi_f34v7_parse_image_info(f34);
+	if (ret < 0)
+		goto fail;
+
+	if (!f34->v7.new_partition_table) {
+		ret = rmi_f34v7_check_ui_firmware_size(f34);
+		if (ret < 0)
+			goto fail;
+
+		ret = rmi_f34v7_check_ui_config_size(f34);
+		if (ret < 0)
+			goto fail;
+
+		if (f34->v7.has_display_cfg &&
+		    f34->v7.img.contains_display_cfg) {
+			ret = rmi_f34v7_check_dp_config_size(f34);
+			if (ret < 0)
+				goto fail;
+		}
+
+		if (f34->v7.has_guest_code && f34->v7.img.contains_guest_code) {
+			ret = rmi_f34v7_check_guest_code_size(f34);
+			if (ret < 0)
+				goto fail;
+		}
+	} else {
+		ret = rmi_f34v7_check_bl_config_size(f34);
+		if (ret < 0)
+			goto fail;
+	}
+
+	ret = rmi_f34v7_erase_all(f34);
+	if (ret < 0)
+		goto fail;
+
+	if (f34->v7.new_partition_table) {
+		ret = rmi_f34v7_write_partition_table(f34);
+		if (ret < 0)
+			goto fail;
+		dev_info(&f34->fn->dev, "%s: Partition table programmed\n",
+			 __func__);
+	}
+
+	dev_info(&f34->fn->dev, "Writing firmware (%d bytes)...\n",
+		 f34->v7.img.ui_firmware.size);
+
+	ret = rmi_f34v7_write_firmware(f34);
+	if (ret < 0)
+		goto fail;
+
+	dev_info(&f34->fn->dev, "Writing config (%d bytes)...\n",
+		 f34->v7.img.ui_config.size);
+
+	f34->v7.config_area = v7_UI_CONFIG_AREA;
+	ret = rmi_f34v7_write_ui_config(f34);
+	if (ret < 0)
+		goto fail;
+
+	if (f34->v7.has_display_cfg && f34->v7.img.contains_display_cfg) {
+		dev_info(&f34->fn->dev, "Writing display config...\n");
+
+		ret = rmi_f34v7_write_dp_config(f34);
+		if (ret < 0)
+			goto fail;
+	}
+
+	if (f34->v7.new_partition_table) {
+		if (f34->v7.has_guest_code && f34->v7.img.contains_guest_code) {
+			dev_info(&f34->fn->dev, "Writing guest code...\n");
+
+			ret = rmi_f34v7_write_guest_code(f34);
+			if (ret < 0)
+				goto fail;
+		}
+	}
+
+fail:
+	return ret;
+}
+
+static int rmi_f34v7_enter_flash_prog(struct f34_data *f34)
+{
+	int ret;
+
+	ret = rmi_f34v7_read_flash_status(f34);
+	if (ret < 0)
+		return ret;
+
+	if (f34->v7.in_bl_mode)
+		return 0;
+
+	ret = rmi_f34v7_write_command(f34, v7_CMD_ENABLE_FLASH_PROG);
+	if (ret < 0)
+		return ret;
+
+	ret = rmi_f34v7_wait_for_idle(f34, ENABLE_WAIT_MS);
+	if (ret < 0)
+		return ret;
+
+	if (!f34->v7.in_bl_mode) {
+		dev_err(&f34->fn->dev, "%s: BL mode not entered\n", __func__);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+int rmi_f34v7_start_reflash(struct f34_data *f34, const struct firmware *fw)
+{
+	int ret = 0;
+
+	f34->v7.config_area = v7_UI_CONFIG_AREA;
+	f34->v7.image = fw->data;
+
+	ret = rmi_f34v7_parse_image_info(f34);
+	if (ret < 0)
+		goto exit;
+
+	if (!f34->v7.force_update && f34->v7.new_partition_table) {
+		dev_err(&f34->fn->dev, "%s: Partition table mismatch\n",
+				__func__);
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	dev_info(&f34->fn->dev, "Firmware image OK\n");
+
+	ret = rmi_f34v7_read_flash_status(f34);
+	if (ret < 0)
+		goto exit;
+
+	if (f34->v7.in_bl_mode) {
+		dev_info(&f34->fn->dev, "%s: Device in bootloader mode\n",
+				__func__);
+	}
+
+	rmi_f34v7_enter_flash_prog(f34);
+
+	return 0;
+
+exit:
+	return ret;
+}
+
+int rmi_f34v7_probe(struct f34_data *f34)
+{
+	int ret;
+
+	/* Read bootloader version */
+	ret = rmi_read_block(f34->fn->rmi_dev,
+			f34->fn->fd.query_base_addr + V7_BOOTLOADER_ID_OFFSET,
+			f34->bootloader_id,
+			sizeof(f34->bootloader_id));
+	if (ret < 0) {
+		dev_err(&f34->fn->dev, "%s: Failed to read bootloader ID\n",
+			__func__);
+		return ret;
+	}
+
+	if (f34->bootloader_id[1] == '5') {
+		f34->bl_version = 5;
+	} else if (f34->bootloader_id[1] == '6') {
+		f34->bl_version = 6;
+	} else if (f34->bootloader_id[1] == 7) {
+		f34->bl_version = 7;
+	} else {
+		dev_err(&f34->fn->dev, "%s: Unrecognized bootloader version\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	memset(&f34->v7.blkcount, 0x00, sizeof(f34->v7.blkcount));
+	memset(&f34->v7.phyaddr, 0x00, sizeof(f34->v7.phyaddr));
+	rmi_f34v7_read_queries(f34);
+
+	f34->v7.force_update = false;
+	return 0;
+}
diff --git a/drivers/input/rmi4/rmi_f54.c b/drivers/input/rmi4/rmi_f54.c
index cf805b960866..dea63e2db3e6 100644
--- a/drivers/input/rmi4/rmi_f54.c
+++ b/drivers/input/rmi4/rmi_f54.c
@@ -200,7 +200,7 @@ static int rmi_f54_request_report(struct rmi_function *fn, u8 report_type)
 
 	error = rmi_write(rmi_dev, fn->fd.command_base_addr, F54_GET_REPORT);
 	if (error < 0)
-		return error;
+		goto unlock;
 
 	init_completion(&f54->cmd_done);
 
@@ -209,15 +209,18 @@ static int rmi_f54_request_report(struct rmi_function *fn, u8 report_type)
 
 	queue_delayed_work(f54->workqueue, &f54->work, 0);
 
+unlock:
 	mutex_unlock(&f54->data_mutex);
 
-	return 0;
+	return error;
 }
 
 static size_t rmi_f54_get_report_size(struct f54_data *f54)
 {
-	u8 rx = f54->num_rx_electrodes ? : f54->num_rx_electrodes;
-	u8 tx = f54->num_tx_electrodes ? : f54->num_tx_electrodes;
+	struct rmi_device *rmi_dev = f54->fn->rmi_dev;
+	struct rmi_driver_data *drv_data = dev_get_drvdata(&rmi_dev->dev);
+	u8 rx = drv_data->num_rx_electrodes ? : f54->num_rx_electrodes;
+	u8 tx = drv_data->num_tx_electrodes ? : f54->num_tx_electrodes;
 	size_t size;
 
 	switch (rmi_f54_get_reptype(f54, f54->input)) {
@@ -401,6 +404,10 @@ static int rmi_f54_vidioc_enum_input(struct file *file, void *priv,
 
 static int rmi_f54_set_input(struct f54_data *f54, unsigned int i)
 {
+	struct rmi_device *rmi_dev = f54->fn->rmi_dev;
+	struct rmi_driver_data *drv_data = dev_get_drvdata(&rmi_dev->dev);
+	u8 rx = drv_data->num_rx_electrodes ? : f54->num_rx_electrodes;
+	u8 tx = drv_data->num_tx_electrodes ? : f54->num_tx_electrodes;
 	struct v4l2_pix_format *f = &f54->format;
 	enum rmi_f54_report_type reptype;
 	int ret;
@@ -415,8 +422,8 @@ static int rmi_f54_set_input(struct f54_data *f54, unsigned int i)
 
 	f54->input = i;
 
-	f->width = f54->num_rx_electrodes;
-	f->height = f54->num_tx_electrodes;
+	f->width = rx;
+	f->height = tx;
 	f->field = V4L2_FIELD_NONE;
 	f->colorspace = V4L2_COLORSPACE_RAW;
 	f->bytesperline = f->width * sizeof(u16);
diff --git a/drivers/input/rmi4/rmi_f55.c b/drivers/input/rmi4/rmi_f55.c
new file mode 100644
index 000000000000..37390ca6a924
--- /dev/null
+++ b/drivers/input/rmi4/rmi_f55.c
@@ -0,0 +1,131 @@
+/*
+ * Copyright (c) 2012-2015 Synaptics Incorporated
+ * Copyright (C) 2016 Zodiac Inflight Innovations
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/rmi.h>
+#include <linux/slab.h>
+#include "rmi_driver.h"
+
+#define F55_NAME		"rmi4_f55"
+
+/* F55 data offsets */
+#define F55_NUM_RX_OFFSET	0
+#define F55_NUM_TX_OFFSET	1
+#define F55_PHYS_CHAR_OFFSET	2
+
+/* Only read required query registers */
+#define F55_QUERY_LEN		3
+
+/* F55 capabilities */
+#define F55_CAP_SENSOR_ASSIGN	BIT(0)
+
+struct f55_data {
+	struct rmi_function *fn;
+
+	u8 qry[F55_QUERY_LEN];
+	u8 num_rx_electrodes;
+	u8 cfg_num_rx_electrodes;
+	u8 num_tx_electrodes;
+	u8 cfg_num_tx_electrodes;
+};
+
+static int rmi_f55_detect(struct rmi_function *fn)
+{
+	struct rmi_device *rmi_dev = fn->rmi_dev;
+	struct rmi_driver_data *drv_data = dev_get_drvdata(&rmi_dev->dev);
+	struct f55_data *f55;
+	int error;
+
+	f55 = dev_get_drvdata(&fn->dev);
+
+	error = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr,
+			       &f55->qry, sizeof(f55->qry));
+	if (error) {
+		dev_err(&fn->dev, "%s: Failed to query F55 properties\n",
+			__func__);
+		return error;
+	}
+
+	f55->num_rx_electrodes = f55->qry[F55_NUM_RX_OFFSET];
+	f55->num_tx_electrodes = f55->qry[F55_NUM_TX_OFFSET];
+
+	f55->cfg_num_rx_electrodes = f55->num_rx_electrodes;
+	f55->cfg_num_tx_electrodes = f55->num_rx_electrodes;
+
+	drv_data->num_rx_electrodes = f55->cfg_num_rx_electrodes;
+	drv_data->num_tx_electrodes = f55->cfg_num_rx_electrodes;
+
+	if (f55->qry[F55_PHYS_CHAR_OFFSET] & F55_CAP_SENSOR_ASSIGN) {
+		int i, total;
+		u8 buf[256];
+
+		/*
+		 * Calculate the number of enabled receive and transmit
+		 * electrodes by reading F55:Ctrl1 (sensor receiver assignment)
+		 * and F55:Ctrl2 (sensor transmitter assignment). The number of
+		 * enabled electrodes is the sum of all field entries with a
+		 * value other than 0xff.
+		 */
+		error = rmi_read_block(fn->rmi_dev,
+				       fn->fd.control_base_addr + 1,
+				       buf, f55->num_rx_electrodes);
+		if (!error) {
+			total = 0;
+			for (i = 0; i < f55->num_rx_electrodes; i++) {
+				if (buf[i] != 0xff)
+					total++;
+			}
+			f55->cfg_num_rx_electrodes = total;
+			drv_data->num_rx_electrodes = total;
+		}
+
+		error = rmi_read_block(fn->rmi_dev,
+				       fn->fd.control_base_addr + 2,
+				       buf, f55->num_tx_electrodes);
+		if (!error) {
+			total = 0;
+			for (i = 0; i < f55->num_tx_electrodes; i++) {
+				if (buf[i] != 0xff)
+					total++;
+			}
+			f55->cfg_num_tx_electrodes = total;
+			drv_data->num_tx_electrodes = total;
+		}
+	}
+
+	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "F55 num_rx_electrodes: %d (raw %d)\n",
+		f55->cfg_num_rx_electrodes, f55->num_rx_electrodes);
+	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "F55 num_tx_electrodes: %d (raw %d)\n",
+		f55->cfg_num_tx_electrodes, f55->num_tx_electrodes);
+
+	return 0;
+}
+
+static int rmi_f55_probe(struct rmi_function *fn)
+{
+	struct f55_data *f55;
+
+	f55 = devm_kzalloc(&fn->dev, sizeof(struct f55_data), GFP_KERNEL);
+	if (!f55)
+		return -ENOMEM;
+
+	f55->fn = fn;
+	dev_set_drvdata(&fn->dev, f55);
+
+	return rmi_f55_detect(fn);
+}
+
+struct rmi_function_handler rmi_f55_handler = {
+	.driver = {
+		.name = F55_NAME,
+	},
+	.func = 0x55,
+	.probe = rmi_f55_probe,
+};
diff --git a/drivers/input/rmi4/rmi_i2c.c b/drivers/input/rmi4/rmi_i2c.c
index 1ebc2c1debae..082306d7c207 100644
--- a/drivers/input/rmi4/rmi_i2c.c
+++ b/drivers/input/rmi4/rmi_i2c.c
@@ -9,7 +9,6 @@
 
 #include <linux/i2c.h>
 #include <linux/rmi.h>
-#include <linux/irq.h>
 #include <linux/of.h>
 #include <linux/delay.h>
 #include <linux/regulator/consumer.h>
@@ -35,8 +34,6 @@ struct rmi_i2c_xport {
 	struct mutex page_mutex;
 	int page;
 
-	int irq;
-
 	u8 *tx_buf;
 	size_t tx_buf_size;
 
@@ -177,42 +174,6 @@ static const struct rmi_transport_ops rmi_i2c_ops = {
 	.read_block	= rmi_i2c_read_block,
 };
 
-static irqreturn_t rmi_i2c_irq(int irq, void *dev_id)
-{
-	struct rmi_i2c_xport *rmi_i2c = dev_id;
-	struct rmi_device *rmi_dev = rmi_i2c->xport.rmi_dev;
-	int ret;
-
-	ret = rmi_process_interrupt_requests(rmi_dev);
-	if (ret)
-		rmi_dbg(RMI_DEBUG_XPORT, &rmi_dev->dev,
-			"Failed to process interrupt request: %d\n", ret);
-
-	return IRQ_HANDLED;
-}
-
-static int rmi_i2c_init_irq(struct i2c_client *client)
-{
-	struct rmi_i2c_xport *rmi_i2c = i2c_get_clientdata(client);
-	int irq_flags = irqd_get_trigger_type(irq_get_irq_data(rmi_i2c->irq));
-	int ret;
-
-	if (!irq_flags)
-		irq_flags = IRQF_TRIGGER_LOW;
-
-	ret = devm_request_threaded_irq(&client->dev, rmi_i2c->irq, NULL,
-			rmi_i2c_irq, irq_flags | IRQF_ONESHOT, client->name,
-			rmi_i2c);
-	if (ret < 0) {
-		dev_warn(&client->dev, "Failed to register interrupt %d\n",
-			rmi_i2c->irq);
-
-		return ret;
-	}
-
-	return 0;
-}
-
 #ifdef CONFIG_OF
 static const struct of_device_id rmi_i2c_of_match[] = {
 	{ .compatible = "syna,rmi4-i2c" },
@@ -255,8 +216,7 @@ static int rmi_i2c_probe(struct i2c_client *client,
 	if (!client->dev.of_node && client_pdata)
 		*pdata = *client_pdata;
 
-	if (client->irq > 0)
-		rmi_i2c->irq = client->irq;
+	pdata->irq = client->irq;
 
 	rmi_dbg(RMI_DEBUG_XPORT, &client->dev, "Probing %s.\n",
 			dev_name(&client->dev));
@@ -321,10 +281,6 @@ static int rmi_i2c_probe(struct i2c_client *client,
 	if (retval)
 		return retval;
 
-	retval = rmi_i2c_init_irq(client);
-	if (retval < 0)
-		return retval;
-
 	dev_info(&client->dev, "registered rmi i2c driver at %#04x.\n",
 			client->addr);
 	return 0;
@@ -337,18 +293,10 @@ static int rmi_i2c_suspend(struct device *dev)
 	struct rmi_i2c_xport *rmi_i2c = i2c_get_clientdata(client);
 	int ret;
 
-	ret = rmi_driver_suspend(rmi_i2c->xport.rmi_dev);
+	ret = rmi_driver_suspend(rmi_i2c->xport.rmi_dev, true);
 	if (ret)
 		dev_warn(dev, "Failed to resume device: %d\n", ret);
 
-	disable_irq(rmi_i2c->irq);
-	if (device_may_wakeup(&client->dev)) {
-		ret = enable_irq_wake(rmi_i2c->irq);
-		if (!ret)
-			dev_warn(dev, "Failed to enable irq for wake: %d\n",
-				ret);
-	}
-
 	regulator_bulk_disable(ARRAY_SIZE(rmi_i2c->supplies),
 			       rmi_i2c->supplies);
 
@@ -368,15 +316,7 @@ static int rmi_i2c_resume(struct device *dev)
 
 	msleep(rmi_i2c->startup_delay);
 
-	enable_irq(rmi_i2c->irq);
-	if (device_may_wakeup(&client->dev)) {
-		ret = disable_irq_wake(rmi_i2c->irq);
-		if (!ret)
-			dev_warn(dev, "Failed to disable irq for wake: %d\n",
-				ret);
-	}
-
-	ret = rmi_driver_resume(rmi_i2c->xport.rmi_dev);
+	ret = rmi_driver_resume(rmi_i2c->xport.rmi_dev, true);
 	if (ret)
 		dev_warn(dev, "Failed to resume device: %d\n", ret);
 
@@ -391,12 +331,10 @@ static int rmi_i2c_runtime_suspend(struct device *dev)
 	struct rmi_i2c_xport *rmi_i2c = i2c_get_clientdata(client);
 	int ret;
 
-	ret = rmi_driver_suspend(rmi_i2c->xport.rmi_dev);
+	ret = rmi_driver_suspend(rmi_i2c->xport.rmi_dev, false);
 	if (ret)
 		dev_warn(dev, "Failed to resume device: %d\n", ret);
 
-	disable_irq(rmi_i2c->irq);
-
 	regulator_bulk_disable(ARRAY_SIZE(rmi_i2c->supplies),
 			       rmi_i2c->supplies);
 
@@ -416,9 +354,7 @@ static int rmi_i2c_runtime_resume(struct device *dev)
 
 	msleep(rmi_i2c->startup_delay);
 
-	enable_irq(rmi_i2c->irq);
-
-	ret = rmi_driver_resume(rmi_i2c->xport.rmi_dev);
+	ret = rmi_driver_resume(rmi_i2c->xport.rmi_dev, false);
 	if (ret)
 		dev_warn(dev, "Failed to resume device: %d\n", ret);
 
diff --git a/drivers/input/rmi4/rmi_smbus.c b/drivers/input/rmi4/rmi_smbus.c
new file mode 100644
index 000000000000..76752555d809
--- /dev/null
+++ b/drivers/input/rmi4/rmi_smbus.c
@@ -0,0 +1,447 @@
+/*
+ * Copyright (c) 2015 - 2016 Red Hat, Inc
+ * Copyright (c) 2011, 2012 Synaptics Incorporated
+ * Copyright (c) 2011 Unixphere
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kconfig.h>
+#include <linux/lockdep.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/rmi.h>
+#include <linux/slab.h>
+#include "rmi_driver.h"
+
+#define SMB_PROTOCOL_VERSION_ADDRESS	0xfd
+#define SMB_MAX_COUNT			32
+#define RMI_SMB2_MAP_SIZE		8 /* 8 entry of 4 bytes each */
+#define RMI_SMB2_MAP_FLAGS_WE		0x01
+
+struct mapping_table_entry {
+	__le16 rmiaddr;
+	u8 readcount;
+	u8 flags;
+};
+
+struct rmi_smb_xport {
+	struct rmi_transport_dev xport;
+	struct i2c_client *client;
+
+	struct mutex page_mutex;
+	int page;
+	u8 table_index;
+	struct mutex mappingtable_mutex;
+	struct mapping_table_entry mapping_table[RMI_SMB2_MAP_SIZE];
+};
+
+static int rmi_smb_get_version(struct rmi_smb_xport *rmi_smb)
+{
+	struct i2c_client *client = rmi_smb->client;
+	int retval;
+
+	/* Check if for SMBus new version device by reading version byte. */
+	retval = i2c_smbus_read_byte_data(client, SMB_PROTOCOL_VERSION_ADDRESS);
+	if (retval < 0) {
+		dev_err(&client->dev, "failed to get SMBus version number!\n");
+		return retval;
+	}
+	return retval + 1;
+}
+
+/* SMB block write - wrapper over ic2_smb_write_block */
+static int smb_block_write(struct rmi_transport_dev *xport,
+			      u8 commandcode, const void *buf, size_t len)
+{
+	struct rmi_smb_xport *rmi_smb =
+		container_of(xport, struct rmi_smb_xport, xport);
+	struct i2c_client *client = rmi_smb->client;
+	int retval;
+
+	retval = i2c_smbus_write_block_data(client, commandcode, len, buf);
+
+	rmi_dbg(RMI_DEBUG_XPORT, &client->dev,
+		"wrote %zd bytes at %#04x: %d (%*ph)\n",
+		len, commandcode, retval, (int)len, buf);
+
+	return retval;
+}
+
+/*
+ * The function to get command code for smbus operations and keeps
+ * records to the driver mapping table
+ */
+static int rmi_smb_get_command_code(struct rmi_transport_dev *xport,
+		u16 rmiaddr, int bytecount, bool isread, u8 *commandcode)
+{
+	struct rmi_smb_xport *rmi_smb =
+		container_of(xport, struct rmi_smb_xport, xport);
+	int i;
+	int retval;
+	struct mapping_table_entry mapping_data[1];
+
+	mutex_lock(&rmi_smb->mappingtable_mutex);
+	for (i = 0; i < RMI_SMB2_MAP_SIZE; i++) {
+		if (rmi_smb->mapping_table[i].rmiaddr == rmiaddr) {
+			if (isread) {
+				if (rmi_smb->mapping_table[i].readcount
+							== bytecount) {
+					*commandcode = i;
+					retval = 0;
+					goto exit;
+				}
+			} else {
+				if (rmi_smb->mapping_table[i].flags &
+							RMI_SMB2_MAP_FLAGS_WE) {
+					*commandcode = i;
+					retval = 0;
+					goto exit;
+				}
+			}
+		}
+	}
+	i = rmi_smb->table_index;
+	rmi_smb->table_index = (i + 1) % RMI_SMB2_MAP_SIZE;
+
+	/* constructs mapping table data entry. 4 bytes each entry */
+	memset(mapping_data, 0, sizeof(mapping_data));
+
+	mapping_data[0].rmiaddr = cpu_to_le16(rmiaddr);
+	mapping_data[0].readcount = bytecount;
+	mapping_data[0].flags = !isread ? RMI_SMB2_MAP_FLAGS_WE : 0;
+
+	retval = smb_block_write(xport, i + 0x80, mapping_data,
+				 sizeof(mapping_data));
+
+	if (retval < 0) {
+		/*
+		 * if not written to device mapping table
+		 * clear the driver mapping table records
+		 */
+		rmi_smb->mapping_table[i].rmiaddr = 0x0000;
+		rmi_smb->mapping_table[i].readcount = 0;
+		rmi_smb->mapping_table[i].flags = 0;
+		goto exit;
+	}
+	/* save to the driver level mapping table */
+	rmi_smb->mapping_table[i].rmiaddr = rmiaddr;
+	rmi_smb->mapping_table[i].readcount = bytecount;
+	rmi_smb->mapping_table[i].flags = !isread ? RMI_SMB2_MAP_FLAGS_WE : 0;
+	*commandcode = i;
+
+exit:
+	mutex_unlock(&rmi_smb->mappingtable_mutex);
+
+	return retval;
+}
+
+static int rmi_smb_write_block(struct rmi_transport_dev *xport, u16 rmiaddr,
+				const void *databuff, size_t len)
+{
+	int retval = 0;
+	u8 commandcode;
+	struct rmi_smb_xport *rmi_smb =
+		container_of(xport, struct rmi_smb_xport, xport);
+	int cur_len = (int)len;
+
+	mutex_lock(&rmi_smb->page_mutex);
+
+	while (cur_len > 0) {
+		/*
+		 * break into 32 bytes chunks to write get command code
+		 */
+		int block_len = min_t(int, len, SMB_MAX_COUNT);
+
+		retval = rmi_smb_get_command_code(xport, rmiaddr, block_len,
+						  false, &commandcode);
+		if (retval < 0)
+			goto exit;
+
+		retval = smb_block_write(xport, commandcode,
+					 databuff, block_len);
+		if (retval < 0)
+			goto exit;
+
+		/* prepare to write next block of bytes */
+		cur_len -= SMB_MAX_COUNT;
+		databuff += SMB_MAX_COUNT;
+		rmiaddr += SMB_MAX_COUNT;
+	}
+exit:
+	mutex_unlock(&rmi_smb->page_mutex);
+	return retval;
+}
+
+/* SMB block read - wrapper over ic2_smb_read_block */
+static int smb_block_read(struct rmi_transport_dev *xport,
+			     u8 commandcode, void *buf, size_t len)
+{
+	struct rmi_smb_xport *rmi_smb =
+		container_of(xport, struct rmi_smb_xport, xport);
+	struct i2c_client *client = rmi_smb->client;
+	int retval;
+
+	retval = i2c_smbus_read_block_data(client, commandcode, buf);
+	if (retval < 0)
+		return retval;
+
+	return retval;
+}
+
+static int rmi_smb_read_block(struct rmi_transport_dev *xport, u16 rmiaddr,
+			      void *databuff, size_t len)
+{
+	struct rmi_smb_xport *rmi_smb =
+		container_of(xport, struct rmi_smb_xport, xport);
+	int retval;
+	u8 commandcode;
+	int cur_len = (int)len;
+
+	mutex_lock(&rmi_smb->page_mutex);
+	memset(databuff, 0, len);
+
+	while (cur_len > 0) {
+		/* break into 32 bytes chunks to write get command code */
+		int block_len =  min_t(int, cur_len, SMB_MAX_COUNT);
+
+		retval = rmi_smb_get_command_code(xport, rmiaddr, block_len,
+						  true, &commandcode);
+		if (retval < 0)
+			goto exit;
+
+		retval = smb_block_read(xport, commandcode,
+					databuff, block_len);
+		if (retval < 0)
+			goto exit;
+
+		/* prepare to read next block of bytes */
+		cur_len -= SMB_MAX_COUNT;
+		databuff += SMB_MAX_COUNT;
+		rmiaddr += SMB_MAX_COUNT;
+	}
+
+	retval = 0;
+
+exit:
+	mutex_unlock(&rmi_smb->page_mutex);
+	return retval;
+}
+
+static void rmi_smb_clear_state(struct rmi_smb_xport *rmi_smb)
+{
+	/* the mapping table has been flushed, discard the current one */
+	mutex_lock(&rmi_smb->mappingtable_mutex);
+	memset(rmi_smb->mapping_table, 0, sizeof(rmi_smb->mapping_table));
+	mutex_unlock(&rmi_smb->mappingtable_mutex);
+}
+
+static int rmi_smb_enable_smbus_mode(struct rmi_smb_xport *rmi_smb)
+{
+	int retval;
+
+	/* we need to get the smbus version to activate the touchpad */
+	retval = rmi_smb_get_version(rmi_smb);
+	if (retval < 0)
+		return retval;
+
+	return 0;
+}
+
+static int rmi_smb_reset(struct rmi_transport_dev *xport, u16 reset_addr)
+{
+	struct rmi_smb_xport *rmi_smb =
+		container_of(xport, struct rmi_smb_xport, xport);
+
+	rmi_smb_clear_state(rmi_smb);
+
+	/*
+	 * we do not call the actual reset command, it has to be handled in
+	 * PS/2 or there will be races between PS/2 and SMBus.
+	 * PS/2 should ensure that a psmouse_reset is called before
+	 * intializing the device and after it has been removed to be in a known
+	 * state.
+	 */
+	return rmi_smb_enable_smbus_mode(rmi_smb);
+}
+
+static const struct rmi_transport_ops rmi_smb_ops = {
+	.write_block	= rmi_smb_write_block,
+	.read_block	= rmi_smb_read_block,
+	.reset		= rmi_smb_reset,
+};
+
+static int rmi_smb_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct rmi_device_platform_data *pdata = dev_get_platdata(&client->dev);
+	struct rmi_smb_xport *rmi_smb;
+	int retval;
+	int smbus_version;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_BLOCK_DATA |
+				     I2C_FUNC_SMBUS_HOST_NOTIFY)) {
+		dev_err(&client->dev,
+			"adapter does not support required functionality.\n");
+		return -ENODEV;
+	}
+
+	if (client->irq <= 0) {
+		dev_err(&client->dev, "no IRQ provided, giving up.\n");
+		return client->irq ? client->irq : -ENODEV;
+	}
+
+	rmi_smb = devm_kzalloc(&client->dev, sizeof(struct rmi_smb_xport),
+				GFP_KERNEL);
+	if (!rmi_smb)
+		return -ENOMEM;
+
+	if (!pdata) {
+		dev_err(&client->dev, "no platform data, aborting\n");
+		return -ENOMEM;
+	}
+
+	rmi_dbg(RMI_DEBUG_XPORT, &client->dev, "Probing %s.\n",
+		dev_name(&client->dev));
+
+	rmi_smb->client = client;
+	mutex_init(&rmi_smb->page_mutex);
+	mutex_init(&rmi_smb->mappingtable_mutex);
+
+	rmi_smb->xport.dev = &client->dev;
+	rmi_smb->xport.pdata = *pdata;
+	rmi_smb->xport.pdata.irq = client->irq;
+	rmi_smb->xport.proto_name = "smb2";
+	rmi_smb->xport.ops = &rmi_smb_ops;
+
+	retval = rmi_smb_get_version(rmi_smb);
+	if (retval < 0)
+		return retval;
+
+	smbus_version = retval;
+	rmi_dbg(RMI_DEBUG_XPORT, &client->dev, "Smbus version is %d",
+		smbus_version);
+
+	if (smbus_version != 2) {
+		dev_err(&client->dev, "Unrecognized SMB version %d.\n",
+				smbus_version);
+		return -ENODEV;
+	}
+
+	i2c_set_clientdata(client, rmi_smb);
+
+	retval = rmi_register_transport_device(&rmi_smb->xport);
+	if (retval) {
+		dev_err(&client->dev, "Failed to register transport driver at 0x%.2X.\n",
+			client->addr);
+		i2c_set_clientdata(client, NULL);
+		return retval;
+	}
+
+	dev_info(&client->dev, "registered rmi smb driver at %#04x.\n",
+			client->addr);
+	return 0;
+
+}
+
+static int rmi_smb_remove(struct i2c_client *client)
+{
+	struct rmi_smb_xport *rmi_smb = i2c_get_clientdata(client);
+
+	rmi_unregister_transport_device(&rmi_smb->xport);
+
+	return 0;
+}
+
+static int __maybe_unused rmi_smb_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct rmi_smb_xport *rmi_smb = i2c_get_clientdata(client);
+	int ret;
+
+	ret = rmi_driver_suspend(rmi_smb->xport.rmi_dev, true);
+	if (ret)
+		dev_warn(dev, "Failed to suspend device: %d\n", ret);
+
+	return ret;
+}
+
+static int __maybe_unused rmi_smb_runtime_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct rmi_smb_xport *rmi_smb = i2c_get_clientdata(client);
+	int ret;
+
+	ret = rmi_driver_suspend(rmi_smb->xport.rmi_dev, false);
+	if (ret)
+		dev_warn(dev, "Failed to suspend device: %d\n", ret);
+
+	return ret;
+}
+
+static int __maybe_unused rmi_smb_resume(struct device *dev)
+{
+	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+	struct rmi_smb_xport *rmi_smb = i2c_get_clientdata(client);
+	struct rmi_device *rmi_dev = rmi_smb->xport.rmi_dev;
+	int ret;
+
+	rmi_smb_reset(&rmi_smb->xport, 0);
+
+	rmi_reset(rmi_dev);
+
+	ret = rmi_driver_resume(rmi_smb->xport.rmi_dev, true);
+	if (ret)
+		dev_warn(dev, "Failed to resume device: %d\n", ret);
+
+	return 0;
+}
+
+static int __maybe_unused rmi_smb_runtime_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct rmi_smb_xport *rmi_smb = i2c_get_clientdata(client);
+	int ret;
+
+	ret = rmi_driver_resume(rmi_smb->xport.rmi_dev, false);
+	if (ret)
+		dev_warn(dev, "Failed to resume device: %d\n", ret);
+
+	return 0;
+}
+
+static const struct dev_pm_ops rmi_smb_pm = {
+	SET_SYSTEM_SLEEP_PM_OPS(rmi_smb_suspend, rmi_smb_resume)
+	SET_RUNTIME_PM_OPS(rmi_smb_runtime_suspend, rmi_smb_runtime_resume,
+			   NULL)
+};
+
+static const struct i2c_device_id rmi_id[] = {
+	{ "rmi4_smbus", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, rmi_id);
+
+static struct i2c_driver rmi_smb_driver = {
+	.driver = {
+		.name	= "rmi4_smbus",
+		.pm	= &rmi_smb_pm,
+	},
+	.id_table	= rmi_id,
+	.probe		= rmi_smb_probe,
+	.remove		= rmi_smb_remove,
+};
+
+module_i2c_driver(rmi_smb_driver);
+
+MODULE_AUTHOR("Andrew Duggan <aduggan@synaptics.com>");
+MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@redhat.com>");
+MODULE_DESCRIPTION("RMI4 SMBus driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/rmi4/rmi_spi.c b/drivers/input/rmi4/rmi_spi.c
index 4ebef607e214..69548d7d1f10 100644
--- a/drivers/input/rmi4/rmi_spi.c
+++ b/drivers/input/rmi4/rmi_spi.c
@@ -12,7 +12,6 @@
 #include <linux/rmi.h>
 #include <linux/slab.h>
 #include <linux/spi/spi.h>
-#include <linux/irq.h>
 #include <linux/of.h>
 #include "rmi_driver.h"
 
@@ -44,8 +43,6 @@ struct rmi_spi_xport {
 	struct mutex page_mutex;
 	int page;
 
-	int irq;
-
 	u8 *rx_buf;
 	u8 *tx_buf;
 	int xfer_buf_size;
@@ -326,41 +323,6 @@ static const struct rmi_transport_ops rmi_spi_ops = {
 	.read_block	= rmi_spi_read_block,
 };
 
-static irqreturn_t rmi_spi_irq(int irq, void *dev_id)
-{
-	struct rmi_spi_xport *rmi_spi = dev_id;
-	struct rmi_device *rmi_dev = rmi_spi->xport.rmi_dev;
-	int ret;
-
-	ret = rmi_process_interrupt_requests(rmi_dev);
-	if (ret)
-		rmi_dbg(RMI_DEBUG_XPORT, &rmi_dev->dev,
-			"Failed to process interrupt request: %d\n", ret);
-
-	return IRQ_HANDLED;
-}
-
-static int rmi_spi_init_irq(struct spi_device *spi)
-{
-	struct rmi_spi_xport *rmi_spi = spi_get_drvdata(spi);
-	int irq_flags = irqd_get_trigger_type(irq_get_irq_data(rmi_spi->irq));
-	int ret;
-
-	if (!irq_flags)
-		irq_flags = IRQF_TRIGGER_LOW;
-
-	ret = devm_request_threaded_irq(&spi->dev, rmi_spi->irq, NULL,
-			rmi_spi_irq, irq_flags | IRQF_ONESHOT,
-			dev_name(&spi->dev), rmi_spi);
-	if (ret < 0) {
-		dev_warn(&spi->dev, "Failed to register interrupt %d\n",
-			rmi_spi->irq);
-		return ret;
-	}
-
-	return 0;
-}
-
 #ifdef CONFIG_OF
 static int rmi_spi_of_probe(struct spi_device *spi,
 			struct rmi_device_platform_data *pdata)
@@ -440,8 +402,7 @@ static int rmi_spi_probe(struct spi_device *spi)
 		return retval;
 	}
 
-	if (spi->irq > 0)
-		rmi_spi->irq = spi->irq;
+	pdata->irq = spi->irq;
 
 	rmi_spi->spi = spi;
 	mutex_init(&rmi_spi->page_mutex);
@@ -477,10 +438,6 @@ static int rmi_spi_probe(struct spi_device *spi)
 	if (retval)
 		return retval;
 
-	retval = rmi_spi_init_irq(spi);
-	if (retval < 0)
-		return retval;
-
 	dev_info(&spi->dev, "registered RMI SPI driver\n");
 	return 0;
 }
@@ -492,17 +449,10 @@ static int rmi_spi_suspend(struct device *dev)
 	struct rmi_spi_xport *rmi_spi = spi_get_drvdata(spi);
 	int ret;
 
-	ret = rmi_driver_suspend(rmi_spi->xport.rmi_dev);
+	ret = rmi_driver_suspend(rmi_spi->xport.rmi_dev, true);
 	if (ret)
 		dev_warn(dev, "Failed to resume device: %d\n", ret);
 
-	disable_irq(rmi_spi->irq);
-	if (device_may_wakeup(&spi->dev)) {
-		ret = enable_irq_wake(rmi_spi->irq);
-		if (!ret)
-			dev_warn(dev, "Failed to enable irq for wake: %d\n",
-				ret);
-	}
 	return ret;
 }
 
@@ -512,15 +462,7 @@ static int rmi_spi_resume(struct device *dev)
 	struct rmi_spi_xport *rmi_spi = spi_get_drvdata(spi);
 	int ret;
 
-	enable_irq(rmi_spi->irq);
-	if (device_may_wakeup(&spi->dev)) {
-		ret = disable_irq_wake(rmi_spi->irq);
-		if (!ret)
-			dev_warn(dev, "Failed to disable irq for wake: %d\n",
-				ret);
-	}
-
-	ret = rmi_driver_resume(rmi_spi->xport.rmi_dev);
+	ret = rmi_driver_resume(rmi_spi->xport.rmi_dev, true);
 	if (ret)
 		dev_warn(dev, "Failed to resume device: %d\n", ret);
 
@@ -535,12 +477,10 @@ static int rmi_spi_runtime_suspend(struct device *dev)
 	struct rmi_spi_xport *rmi_spi = spi_get_drvdata(spi);
 	int ret;
 
-	ret = rmi_driver_suspend(rmi_spi->xport.rmi_dev);
+	ret = rmi_driver_suspend(rmi_spi->xport.rmi_dev, false);
 	if (ret)
 		dev_warn(dev, "Failed to resume device: %d\n", ret);
 
-	disable_irq(rmi_spi->irq);
-
 	return 0;
 }
 
@@ -550,9 +490,7 @@ static int rmi_spi_runtime_resume(struct device *dev)
 	struct rmi_spi_xport *rmi_spi = spi_get_drvdata(spi);
 	int ret;
 
-	enable_irq(rmi_spi->irq);
-
-	ret = rmi_driver_resume(rmi_spi->xport.rmi_dev);
+	ret = rmi_driver_resume(rmi_spi->xport.rmi_dev, false);
 	if (ret)
 		dev_warn(dev, "Failed to resume device: %d\n", ret);
author	Linus Torvalds <torvalds@linux-foundation.org>	2016-12-17 16:45:00 -0800
committer	Linus Torvalds <torvalds@linux-foundation.org>	2016-12-17 16:45:00 -0800
commit	af79ce47efabba36d1db0902d46a80de7f251411 (patch)
tree	571106db25ed2da54891995aed38407f85e6ac4b /drivers/input/rmi4
parent	c07dee7348e2451bcf2f178bf0e7830268e2c31a (diff)
parent	f26e8817b235d8764363bffcc9cbfc61867371f2 (diff)