diff options
author | Sifan Naeem <sifan.naeem@imgtec.com> | 2015-11-19 09:35:16 +0000 |
---|---|---|
committer | Wolfram Sang <wsa@the-dreams.de> | 2016-01-02 22:04:55 +0100 |
commit | c7b0a7c10752fa9a30f719848f4350fa02fdb8e5 (patch) | |
tree | a0929f4745a86e54d5a5fb2daaadb981db6d60ad /drivers/i2c | |
parent | dd29207e6ccf6ae705dc01c6db73f3a8cb641400 (diff) |
i2c: img-scb: add handle for Master halt interrupt
Master halt is issued after each byte of a transaction is processed in
IP version 3.3.
Master halt will stall the bus by holding the SCK line low until the
halt bit in the scb_general_control is cleared.
After the last byte of a transfer is processed we can use the Master
Halt interrupt to facilitate a repeated start transfer without
issuing a stop bit.
Signed-off-by: Sifan Naeem <sifan.naeem@imgtec.com>
Reviewed-by: James Hartley <james.hartley@imgtec.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Diffstat (limited to 'drivers/i2c')
-rw-r--r-- | drivers/i2c/busses/i2c-img-scb.c | 17 |
1 files changed, 14 insertions, 3 deletions
diff --git a/drivers/i2c/busses/i2c-img-scb.c b/drivers/i2c/busses/i2c-img-scb.c index f416010a0b49..991118f837be 100644 --- a/drivers/i2c/busses/i2c-img-scb.c +++ b/drivers/i2c/busses/i2c-img-scb.c @@ -151,6 +151,7 @@ #define INT_FIFO_EMPTYING BIT(12) #define INT_TRANSACTION_DONE BIT(15) #define INT_SLAVE_EVENT BIT(16) +#define INT_MASTER_HALTED BIT(17) #define INT_TIMING BIT(18) #define INT_STOP_DETECTED BIT(19) @@ -177,6 +178,7 @@ INT_FIFO_FULL | \ INT_FIFO_FILLING | \ INT_FIFO_EMPTY | \ + INT_MASTER_HALTED | \ INT_STOP_DETECTED) #define INT_ENABLE_MASK_WAITSTOP (INT_SLAVE_EVENT | \ @@ -875,18 +877,27 @@ static unsigned int img_i2c_auto(struct img_i2c *i2c, } if (i2c->msg.flags & I2C_M_RD) { - if (int_status & INT_FIFO_FULL_FILLING) { + if (int_status & (INT_FIFO_FULL_FILLING | INT_MASTER_HALTED)) { img_i2c_read_fifo(i2c); if (i2c->msg.len == 0) return ISR_WAITSTOP; } } else { - if (int_status & INT_FIFO_EMPTY) { - if (i2c->msg.len == 0) + if (int_status & (INT_FIFO_EMPTY | INT_MASTER_HALTED)) { + if ((int_status & INT_FIFO_EMPTY) && + i2c->msg.len == 0) return ISR_WAITSTOP; img_i2c_write_fifo(i2c); } } + if (int_status & INT_MASTER_HALTED) { + /* + * Release and then enable transaction halt, to + * allow only a single byte to proceed. + */ + img_i2c_transaction_halt(i2c, false); + img_i2c_transaction_halt(i2c, !i2c->last_msg); + } return 0; } |