x86, apic: Remove support for IBM Summit/EXA chipset

There should no longer be any IBM x440 systems or those using the
Summit/EXA chipset out in the wild, so remove support for it.

We've done our due diligence in reaching out to any contact information
listed for this chipset and no indication was given that it should be
kept around.

Signed-off-by: David Rientjes <rientjes@google.com>

2 files changed, 0 insertions, 114 deletions

diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index c7ca50a9c232..3a85bf3f1390 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -1,6 +1,5 @@
 obj-$(CONFIG_CLKSRC_OF)	+= clksrc-of.o
 obj-$(CONFIG_ATMEL_TCB_CLKSRC)	+= tcb_clksrc.o
-obj-$(CONFIG_X86_CYCLONE_TIMER)	+= cyclone.o
 obj-$(CONFIG_X86_PM_TIMER)	+= acpi_pm.o
 obj-$(CONFIG_SCx200HR_TIMER)	+= scx200_hrt.o
 obj-$(CONFIG_CS5535_CLOCK_EVENT_SRC)	+= cs5535-clockevt.o
diff --git a/drivers/clocksource/cyclone.c b/drivers/clocksource/cyclone.c
deleted file mode 100644
index 9e0998f22885..000000000000
--- a/drivers/clocksource/cyclone.c
+++ /dev/null
@@ -1,113 +0,0 @@
-#include <linux/clocksource.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/timex.h>
-#include <linux/init.h>
-
-#include <asm/pgtable.h>
-#include <asm/io.h>
-
-#include <asm/mach_timer.h>
-
-#define CYCLONE_CBAR_ADDR	0xFEB00CD0	/* base address ptr */
-#define CYCLONE_PMCC_OFFSET	0x51A0		/* offset to control register */
-#define CYCLONE_MPCS_OFFSET	0x51A8		/* offset to select register */
-#define CYCLONE_MPMC_OFFSET	0x51D0		/* offset to count register */
-#define CYCLONE_TIMER_FREQ	99780000	/* 100Mhz, but not really */
-#define CYCLONE_TIMER_MASK	CLOCKSOURCE_MASK(32) /* 32 bit mask */
-
-int use_cyclone = 0;
-static void __iomem *cyclone_ptr;
-
-static cycle_t read_cyclone(struct clocksource *cs)
-{
-	return (cycle_t)readl(cyclone_ptr);
-}
-
-static struct clocksource clocksource_cyclone = {
-	.name		= "cyclone",
-	.rating		= 250,
-	.read		= read_cyclone,
-	.mask		= CYCLONE_TIMER_MASK,
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int __init init_cyclone_clocksource(void)
-{
-	unsigned long base;	/* saved value from CBAR */
-	unsigned long offset;
-	u32 __iomem* volatile cyclone_timer;	/* Cyclone MPMC0 register */
-	u32 __iomem* reg;
-	int i;
-
-	/* make sure we're on a summit box: */
-	if (!use_cyclone)
-		return -ENODEV;
-
-	printk(KERN_INFO "Summit chipset: Starting Cyclone Counter.\n");
-
-	/* find base address: */
-	offset = CYCLONE_CBAR_ADDR;
-	reg = ioremap_nocache(offset, sizeof(reg));
-	if (!reg) {
-		printk(KERN_ERR "Summit chipset: Could not find valid CBAR register.\n");
-		return -ENODEV;
-	}
-	/* even on 64bit systems, this is only 32bits: */
-	base = readl(reg);
-	iounmap(reg);
-	if (!base) {
-		printk(KERN_ERR "Summit chipset: Could not find valid CBAR value.\n");
-		return -ENODEV;
-	}
-
-	/* setup PMCC: */
-	offset = base + CYCLONE_PMCC_OFFSET;
-	reg = ioremap_nocache(offset, sizeof(reg));
-	if (!reg) {
-		printk(KERN_ERR "Summit chipset: Could not find valid PMCC register.\n");
-		return -ENODEV;
-	}
-	writel(0x00000001,reg);
-	iounmap(reg);
-
-	/* setup MPCS: */
-	offset = base + CYCLONE_MPCS_OFFSET;
-	reg = ioremap_nocache(offset, sizeof(reg));
-	if (!reg) {
-		printk(KERN_ERR "Summit chipset: Could not find valid MPCS register.\n");
-		return -ENODEV;
-	}
-	writel(0x00000001,reg);
-	iounmap(reg);
-
-	/* map in cyclone_timer: */
-	offset = base + CYCLONE_MPMC_OFFSET;
-	cyclone_timer = ioremap_nocache(offset, sizeof(u64));
-	if (!cyclone_timer) {
-		printk(KERN_ERR "Summit chipset: Could not find valid MPMC register.\n");
-		return -ENODEV;
-	}
-
-	/* quick test to make sure its ticking: */
-	for (i = 0; i < 3; i++){
-		u32 old = readl(cyclone_timer);
-		int stall = 100;
-
-		while (stall--)
-			barrier();
-
-		if (readl(cyclone_timer) == old) {
-			printk(KERN_ERR "Summit chipset: Counter not counting! DISABLED\n");
-			iounmap(cyclone_timer);
-			cyclone_timer = NULL;
-			return -ENODEV;
-		}
-	}
-	cyclone_ptr = cyclone_timer;
-
-	return clocksource_register_hz(&clocksource_cyclone,
-					CYCLONE_TIMER_FREQ);
-}
-
-arch_initcall(init_cyclone_clocksource);