/* -*- Mode: c; c-basic-offset: 4; indent-tabs-mode: t; tab-width: 8; -*- */ /* cairo - a vector graphics library with display and print output * * Copyright © 2002 University of Southern California * Copyright © 2005 Red Hat, Inc. * Copyright © 2011 Intel Corporation * * This library is free software; you can redistribute it and/or * modify it either under the terms of the GNU Lesser General Public * License version 2.1 as published by the Free Software Foundation * (the "LGPL") or, at your option, under the terms of the Mozilla * Public License Version 1.1 (the "MPL"). If you do not alter this * notice, a recipient may use your version of this file under either * the MPL or the LGPL. * * You should have received a copy of the LGPL along with this library * in the file COPYING-LGPL-2.1; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA * You should have received a copy of the MPL along with this library * in the file COPYING-MPL-1.1 * * The contents of this file are subject to the Mozilla Public License * Version 1.1 (the "License"); you may not use this file except in * compliance with the License. You may obtain a copy of the License at * http://www.mozilla.org/MPL/ * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY * OF ANY KIND, either express or implied. See the LGPL or the MPL for * the specific language governing rights and limitations. * * The Original Code is the cairo graphics library. * * The Initial Developer of the Original Code is University of Southern * California. * * Contributor(s): * Carl D. Worth * Chris Wilson */ #include "cairoint.h" #include "cairo-private.h" #include "cairo-backend-private.h" #include "cairo-error-private.h" #include "cairo-path-private.h" #include "cairo-pattern-private.h" #include "cairo-surface-private.h" #include /** * SECTION:cairo * @Title: cairo_t * @Short_Description: The cairo drawing context * @See_Also: #cairo_surface_t * * #cairo_t is the main object used when drawing with cairo. To * draw with cairo, you create a #cairo_t, set the target surface, * and drawing options for the #cairo_t, create shapes with * functions like cairo_move_to() and cairo_line_to(), and then * draw shapes with cairo_stroke() or cairo_fill(). * * #cairo_t's can be pushed to a stack via cairo_save(). * They may then safely be changed, without loosing the current state. * Use cairo_restore() to restore to the saved state. */ /** * SECTION:cairo-text * @Title: text * @Short_Description: Rendering text and glyphs * @See_Also: #cairo_font_face_t, #cairo_scaled_font_t, cairo_text_path(), * cairo_glyph_path() * * The functions with text in their name form cairo's * toy text API. The toy API takes UTF-8 encoded * text and is limited in its functionality to rendering simple * left-to-right text with no advanced features. That means for example * that most complex scripts like Hebrew, Arabic, and Indic scripts are * out of question. No kerning or correct positioning of diacritical marks * either. The font selection is pretty limited too and doesn't handle the * case that the selected font does not cover the characters in the text. * This set of functions are really that, a toy text API, for testing and * demonstration purposes. Any serious application should avoid them. * * The functions with glyphs in their name form cairo's * low-level text API. The low-level API relies on * the user to convert text to a set of glyph indexes and positions. This * is a very hard problem and is best handled by external libraries, like * the pangocairo that is part of the Pango text layout and rendering library. * Pango is available from http://www.pango.org/. */ /** * SECTION:cairo-transforms * @Title: Transformations * @Short_Description: Manipulating the current transformation matrix * @See_Also: #cairo_matrix_t * * The current transformation matrix, ctm, is a * two-dimensional affine transformation that maps all coordinates and other * drawing instruments from the user space into the * surface's canonical coordinate system, also known as the device * space. */ #define DEFINE_NIL_CONTEXT(status) \ { \ CAIRO_REFERENCE_COUNT_INVALID, /* ref_count */ \ status, /* status */ \ { 0, 0, 0, NULL }, /* user_data */ \ NULL \ } static const cairo_t _cairo_nil[] = { DEFINE_NIL_CONTEXT (CAIRO_STATUS_NO_MEMORY), DEFINE_NIL_CONTEXT (CAIRO_STATUS_INVALID_RESTORE), DEFINE_NIL_CONTEXT (CAIRO_STATUS_INVALID_POP_GROUP), DEFINE_NIL_CONTEXT (CAIRO_STATUS_NO_CURRENT_POINT), DEFINE_NIL_CONTEXT (CAIRO_STATUS_INVALID_MATRIX), DEFINE_NIL_CONTEXT (CAIRO_STATUS_INVALID_STATUS), DEFINE_NIL_CONTEXT (CAIRO_STATUS_NULL_POINTER), DEFINE_NIL_CONTEXT (CAIRO_STATUS_INVALID_STRING), DEFINE_NIL_CONTEXT (CAIRO_STATUS_INVALID_PATH_DATA), DEFINE_NIL_CONTEXT (CAIRO_STATUS_READ_ERROR), DEFINE_NIL_CONTEXT (CAIRO_STATUS_WRITE_ERROR), DEFINE_NIL_CONTEXT (CAIRO_STATUS_SURFACE_FINISHED), DEFINE_NIL_CONTEXT (CAIRO_STATUS_SURFACE_TYPE_MISMATCH), DEFINE_NIL_CONTEXT (CAIRO_STATUS_PATTERN_TYPE_MISMATCH), DEFINE_NIL_CONTEXT (CAIRO_STATUS_INVALID_CONTENT), DEFINE_NIL_CONTEXT (CAIRO_STATUS_INVALID_FORMAT), DEFINE_NIL_CONTEXT (CAIRO_STATUS_INVALID_VISUAL), DEFINE_NIL_CONTEXT (CAIRO_STATUS_FILE_NOT_FOUND), DEFINE_NIL_CONTEXT (CAIRO_STATUS_INVALID_DASH), DEFINE_NIL_CONTEXT (CAIRO_STATUS_INVALID_DSC_COMMENT), DEFINE_NIL_CONTEXT (CAIRO_STATUS_INVALID_INDEX), DEFINE_NIL_CONTEXT (CAIRO_STATUS_CLIP_NOT_REPRESENTABLE), DEFINE_NIL_CONTEXT (CAIRO_STATUS_TEMP_FILE_ERROR), DEFINE_NIL_CONTEXT (CAIRO_STATUS_INVALID_STRIDE), DEFINE_NIL_CONTEXT (CAIRO_STATUS_FONT_TYPE_MISMATCH), DEFINE_NIL_CONTEXT (CAIRO_STATUS_USER_FONT_IMMUTABLE), DEFINE_NIL_CONTEXT (CAIRO_STATUS_USER_FONT_ERROR), DEFINE_NIL_CONTEXT (CAIRO_STATUS_NEGATIVE_COUNT), DEFINE_NIL_CONTEXT (CAIRO_STATUS_INVALID_CLUSTERS), DEFINE_NIL_CONTEXT (CAIRO_STATUS_INVALID_SLANT), DEFINE_NIL_CONTEXT (CAIRO_STATUS_INVALID_WEIGHT), DEFINE_NIL_CONTEXT (CAIRO_STATUS_INVALID_SIZE), DEFINE_NIL_CONTEXT (CAIRO_STATUS_USER_FONT_NOT_IMPLEMENTED), DEFINE_NIL_CONTEXT (CAIRO_STATUS_DEVICE_TYPE_MISMATCH), DEFINE_NIL_CONTEXT (CAIRO_STATUS_DEVICE_ERROR), DEFINE_NIL_CONTEXT (CAIRO_STATUS_INVALID_MESH_CONSTRUCTION), DEFINE_NIL_CONTEXT (CAIRO_STATUS_DEVICE_FINISHED) }; COMPILE_TIME_ASSERT (ARRAY_LENGTH (_cairo_nil) == CAIRO_STATUS_LAST_STATUS - 1); /** * _cairo_set_error: * @cr: a cairo context * @status: a status value indicating an error * * Atomically sets cr->status to @status and calls _cairo_error; * Does nothing if status is %CAIRO_STATUS_SUCCESS. * * All assignments of an error status to cr->status should happen * through _cairo_set_error(). Note that due to the nature of the atomic * operation, it is not safe to call this function on the nil objects. * * The purpose of this function is to allow the user to set a * breakpoint in _cairo_error() to generate a stack trace for when the * user causes cairo to detect an error. **/ static void _cairo_set_error (cairo_t *cr, cairo_status_t status) { /* Don't overwrite an existing error. This preserves the first * error, which is the most significant. */ _cairo_status_set_error (&cr->status, _cairo_error (status)); } cairo_t * _cairo_create_in_error (cairo_status_t status) { cairo_t *cr; assert (status != CAIRO_STATUS_SUCCESS); cr = (cairo_t *) &_cairo_nil[status - CAIRO_STATUS_NO_MEMORY]; assert (status == cr->status); return cr; } /** * cairo_create: * @target: target surface for the context * * Creates a new #cairo_t with all graphics state parameters set to * default values and with @target as a target surface. The target * surface should be constructed with a backend-specific function such * as cairo_image_surface_create() (or any other * cairo_backend_surface_create() * variant). * * This function references @target, so you can immediately * call cairo_surface_destroy() on it if you don't need to * maintain a separate reference to it. * * Return value: a newly allocated #cairo_t with a reference * count of 1. The initial reference count should be released * with cairo_destroy() when you are done using the #cairo_t. * This function never returns %NULL. If memory cannot be * allocated, a special #cairo_t object will be returned on * which cairo_status() returns %CAIRO_STATUS_NO_MEMORY. * You can use this object normally, but no drawing will * be done. **/ cairo_t * cairo_create (cairo_surface_t *target) { if (unlikely (target == NULL)) return _cairo_create_in_error (_cairo_error (CAIRO_STATUS_NULL_POINTER)); if (unlikely (target->status)) return _cairo_create_in_error (target->status); return target->backend->create_context (target); } slim_hidden_def (cairo_create); void _cairo_init (cairo_t *cr, const cairo_backend_t *backend) { CAIRO_REFERENCE_COUNT_INIT (&cr->ref_count, 1); cr->status = CAIRO_STATUS_SUCCESS; _cairo_user_data_array_init (&cr->user_data); cr->backend = backend; } /** * cairo_reference: * @cr: a #cairo_t * * Increases the reference count on @cr by one. This prevents * @cr from being destroyed until a matching call to cairo_destroy() * is made. * * The number of references to a #cairo_t can be get using * cairo_get_reference_count(). * * Return value: the referenced #cairo_t. **/ cairo_t * cairo_reference (cairo_t *cr) { if (cr == NULL || CAIRO_REFERENCE_COUNT_IS_INVALID (&cr->ref_count)) return cr; assert (CAIRO_REFERENCE_COUNT_HAS_REFERENCE (&cr->ref_count)); _cairo_reference_count_inc (&cr->ref_count); return cr; } void _cairo_fini (cairo_t *cr) { _cairo_user_data_array_fini (&cr->user_data); } /** * cairo_destroy: * @cr: a #cairo_t * * Decreases the reference count on @cr by one. If the result * is zero, then @cr and all associated resources are freed. * See cairo_reference(). **/ void cairo_destroy (cairo_t *cr) { if (cr == NULL || CAIRO_REFERENCE_COUNT_IS_INVALID (&cr->ref_count)) return; assert (CAIRO_REFERENCE_COUNT_HAS_REFERENCE (&cr->ref_count)); if (! _cairo_reference_count_dec_and_test (&cr->ref_count)) return; cr->backend->destroy (cr); } slim_hidden_def (cairo_destroy); /** * cairo_get_user_data: * @cr: a #cairo_t * @key: the address of the #cairo_user_data_key_t the user data was * attached to * * Return user data previously attached to @cr using the specified * key. If no user data has been attached with the given key this * function returns %NULL. * * Return value: the user data previously attached or %NULL. * * Since: 1.4 **/ void * cairo_get_user_data (cairo_t *cr, const cairo_user_data_key_t *key) { return _cairo_user_data_array_get_data (&cr->user_data, key); } /** * cairo_set_user_data: * @cr: a #cairo_t * @key: the address of a #cairo_user_data_key_t to attach the user data to * @user_data: the user data to attach to the #cairo_t * @destroy: a #cairo_destroy_func_t which will be called when the * #cairo_t is destroyed or when new user data is attached using the * same key. * * Attach user data to @cr. To remove user data from a surface, * call this function with the key that was used to set it and %NULL * for @data. * * Return value: %CAIRO_STATUS_SUCCESS or %CAIRO_STATUS_NO_MEMORY if a * slot could not be allocated for the user data. * * Since: 1.4 **/ cairo_status_t cairo_set_user_data (cairo_t *cr, const cairo_user_data_key_t *key, void *user_data, cairo_destroy_func_t destroy) { if (CAIRO_REFERENCE_COUNT_IS_INVALID (&cr->ref_count)) return cr->status; return _cairo_user_data_array_set_data (&cr->user_data, key, user_data, destroy); } /** * cairo_get_reference_count: * @cr: a #cairo_t * * Returns the current reference count of @cr. * * Return value: the current reference count of @cr. If the * object is a nil object, 0 will be returned. * * Since: 1.4 **/ unsigned int cairo_get_reference_count (cairo_t *cr) { if (cr == NULL || CAIRO_REFERENCE_COUNT_IS_INVALID (&cr->ref_count)) return 0; return CAIRO_REFERENCE_COUNT_GET_VALUE (&cr->ref_count); } /** * cairo_save: * @cr: a #cairo_t * * Makes a copy of the current state of @cr and saves it * on an internal stack of saved states for @cr. When * cairo_restore() is called, @cr will be restored to * the saved state. Multiple calls to cairo_save() and * cairo_restore() can be nested; each call to cairo_restore() * restores the state from the matching paired cairo_save(). * * It isn't necessary to clear all saved states before * a #cairo_t is freed. If the reference count of a #cairo_t * drops to zero in response to a call to cairo_destroy(), * any saved states will be freed along with the #cairo_t. **/ void cairo_save (cairo_t *cr) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->save (cr); if (unlikely (status)) _cairo_set_error (cr, status); } slim_hidden_def(cairo_save); /** * cairo_restore: * @cr: a #cairo_t * * Restores @cr to the state saved by a preceding call to * cairo_save() and removes that state from the stack of * saved states. **/ void cairo_restore (cairo_t *cr) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->restore (cr); if (unlikely (status)) _cairo_set_error (cr, status); } slim_hidden_def(cairo_restore); /** * cairo_push_group: * @cr: a cairo context * * Temporarily redirects drawing to an intermediate surface known as a * group. The redirection lasts until the group is completed by a call * to cairo_pop_group() or cairo_pop_group_to_source(). These calls * provide the result of any drawing to the group as a pattern, * (either as an explicit object, or set as the source pattern). * * This group functionality can be convenient for performing * intermediate compositing. One common use of a group is to render * objects as opaque within the group, (so that they occlude each * other), and then blend the result with translucence onto the * destination. * * Groups can be nested arbitrarily deep by making balanced calls to * cairo_push_group()/cairo_pop_group(). Each call pushes/pops the new * target group onto/from a stack. * * The cairo_push_group() function calls cairo_save() so that any * changes to the graphics state will not be visible outside the * group, (the pop_group functions call cairo_restore()). * * By default the intermediate group will have a content type of * %CAIRO_CONTENT_COLOR_ALPHA. Other content types can be chosen for * the group by using cairo_push_group_with_content() instead. * * As an example, here is how one might fill and stroke a path with * translucence, but without any portion of the fill being visible * under the stroke: * * * cairo_push_group (cr); * cairo_set_source (cr, fill_pattern); * cairo_fill_preserve (cr); * cairo_set_source (cr, stroke_pattern); * cairo_stroke (cr); * cairo_pop_group_to_source (cr); * cairo_paint_with_alpha (cr, alpha); * * * Since: 1.2 */ void cairo_push_group (cairo_t *cr) { cairo_push_group_with_content (cr, CAIRO_CONTENT_COLOR_ALPHA); } /** * cairo_push_group_with_content: * @cr: a cairo context * @content: a #cairo_content_t indicating the type of group that * will be created * * Temporarily redirects drawing to an intermediate surface known as a * group. The redirection lasts until the group is completed by a call * to cairo_pop_group() or cairo_pop_group_to_source(). These calls * provide the result of any drawing to the group as a pattern, * (either as an explicit object, or set as the source pattern). * * The group will have a content type of @content. The ability to * control this content type is the only distinction between this * function and cairo_push_group() which you should see for a more * detailed description of group rendering. * * Since: 1.2 */ void cairo_push_group_with_content (cairo_t *cr, cairo_content_t content) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->push_group (cr, content); if (unlikely (status)) _cairo_set_error (cr, status); } slim_hidden_def(cairo_push_group_with_content); /** * cairo_pop_group: * @cr: a cairo context * * Terminates the redirection begun by a call to cairo_push_group() or * cairo_push_group_with_content() and returns a new pattern * containing the results of all drawing operations performed to the * group. * * The cairo_pop_group() function calls cairo_restore(), (balancing a * call to cairo_save() by the push_group function), so that any * changes to the graphics state will not be visible outside the * group. * * Return value: a newly created (surface) pattern containing the * results of all drawing operations performed to the group. The * caller owns the returned object and should call * cairo_pattern_destroy() when finished with it. * * Since: 1.2 **/ cairo_pattern_t * cairo_pop_group (cairo_t *cr) { cairo_pattern_t *group_pattern; if (unlikely (cr->status)) return _cairo_pattern_create_in_error (cr->status); group_pattern = cr->backend->pop_group (cr); if (unlikely (group_pattern->status)) _cairo_set_error (cr, group_pattern->status); return group_pattern; } slim_hidden_def(cairo_pop_group); /** * cairo_pop_group_to_source: * @cr: a cairo context * * Terminates the redirection begun by a call to cairo_push_group() or * cairo_push_group_with_content() and installs the resulting pattern * as the source pattern in the given cairo context. * * The behavior of this function is equivalent to the sequence of * operations: * * * cairo_pattern_t *group = cairo_pop_group (cr); * cairo_set_source (cr, group); * cairo_pattern_destroy (group); * * * but is more convenient as their is no need for a variable to store * the short-lived pointer to the pattern. * * The cairo_pop_group() function calls cairo_restore(), (balancing a * call to cairo_save() by the push_group function), so that any * changes to the graphics state will not be visible outside the * group. * * Since: 1.2 **/ void cairo_pop_group_to_source (cairo_t *cr) { cairo_pattern_t *group_pattern; group_pattern = cairo_pop_group (cr); cairo_set_source (cr, group_pattern); cairo_pattern_destroy (group_pattern); } /** * cairo_set_operator: * @cr: a #cairo_t * @op: a compositing operator, specified as a #cairo_operator_t * * Sets the compositing operator to be used for all drawing * operations. See #cairo_operator_t for details on the semantics of * each available compositing operator. * * The default operator is %CAIRO_OPERATOR_OVER. **/ void cairo_set_operator (cairo_t *cr, cairo_operator_t op) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->set_operator (cr, op); if (unlikely (status)) _cairo_set_error (cr, status); } slim_hidden_def (cairo_set_operator); #if 0 /** * cairo_set_opacity: * @cr: a #cairo_t * @opacity: the level of opacity to use when compositing * * Sets the compositing opacity to be used for all drawing * operations. The effect is to fade out the operations * using the alpha value. * * The default opacity is 1. **/ void cairo_set_opacity (cairo_t *cr, double opacity) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->set_opacity (cr, opacity); if (unlikely (status)) _cairo_set_error (cr, status); } #endif /** * cairo_set_source_rgb * @cr: a cairo context * @red: red component of color * @green: green component of color * @blue: blue component of color * * Sets the source pattern within @cr to an opaque color. This opaque * color will then be used for any subsequent drawing operation until * a new source pattern is set. * * The color components are floating point numbers in the range 0 to * 1. If the values passed in are outside that range, they will be * clamped. * * The default source pattern is opaque black, (that is, it is * equivalent to cairo_set_source_rgb(cr, 0.0, 0.0, 0.0)). **/ void cairo_set_source_rgb (cairo_t *cr, double red, double green, double blue) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->set_source_rgba (cr, red, green, blue, 1.); if (unlikely (status)) _cairo_set_error (cr, status); } slim_hidden_def (cairo_set_source_rgb); /** * cairo_set_source_rgba: * @cr: a cairo context * @red: red component of color * @green: green component of color * @blue: blue component of color * @alpha: alpha component of color * * Sets the source pattern within @cr to a translucent color. This * color will then be used for any subsequent drawing operation until * a new source pattern is set. * * The color and alpha components are floating point numbers in the * range 0 to 1. If the values passed in are outside that range, they * will be clamped. * * The default source pattern is opaque black, (that is, it is * equivalent to cairo_set_source_rgba(cr, 0.0, 0.0, 0.0, 1.0)). **/ void cairo_set_source_rgba (cairo_t *cr, double red, double green, double blue, double alpha) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->set_source_rgba (cr, red, green, blue, alpha); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_set_source_surface: * @cr: a cairo context * @surface: a surface to be used to set the source pattern * @x: User-space X coordinate for surface origin * @y: User-space Y coordinate for surface origin * * This is a convenience function for creating a pattern from @surface * and setting it as the source in @cr with cairo_set_source(). * * The @x and @y parameters give the user-space coordinate at which * the surface origin should appear. (The surface origin is its * upper-left corner before any transformation has been applied.) The * @x and @y parameters are negated and then set as translation values * in the pattern matrix. * * Other than the initial translation pattern matrix, as described * above, all other pattern attributes, (such as its extend mode), are * set to the default values as in cairo_pattern_create_for_surface(). * The resulting pattern can be queried with cairo_get_source() so * that these attributes can be modified if desired, (eg. to create a * repeating pattern with cairo_pattern_set_extend()). **/ void cairo_set_source_surface (cairo_t *cr, cairo_surface_t *surface, double x, double y) { cairo_status_t status; if (unlikely (cr->status)) return; if (unlikely (surface == NULL)) { _cairo_set_error (cr, CAIRO_STATUS_NULL_POINTER); return; } status = cr->backend->set_source_surface (cr, surface, x, y); if (unlikely (status)) _cairo_set_error (cr, status); } slim_hidden_def (cairo_set_source_surface); /** * cairo_set_source * @cr: a cairo context * @source: a #cairo_pattern_t to be used as the source for * subsequent drawing operations. * * Sets the source pattern within @cr to @source. This pattern * will then be used for any subsequent drawing operation until a new * source pattern is set. * * Note: The pattern's transformation matrix will be locked to the * user space in effect at the time of cairo_set_source(). This means * that further modifications of the current transformation matrix * will not affect the source pattern. See cairo_pattern_set_matrix(). * * The default source pattern is a solid pattern that is opaque black, * (that is, it is equivalent to cairo_set_source_rgb(cr, 0.0, 0.0, * 0.0)). **/ void cairo_set_source (cairo_t *cr, cairo_pattern_t *source) { cairo_status_t status; if (unlikely (cr->status)) return; if (unlikely (source == NULL)) { _cairo_set_error (cr, CAIRO_STATUS_NULL_POINTER); return; } if (unlikely (source->status)) { _cairo_set_error (cr, source->status); return; } status = cr->backend->set_source (cr, source); if (unlikely (status)) _cairo_set_error (cr, status); } slim_hidden_def (cairo_set_source); /** * cairo_get_source: * @cr: a cairo context * * Gets the current source pattern for @cr. * * Return value: the current source pattern. This object is owned by * cairo. To keep a reference to it, you must call * cairo_pattern_reference(). **/ cairo_pattern_t * cairo_get_source (cairo_t *cr) { if (unlikely (cr->status)) return _cairo_pattern_create_in_error (cr->status); return cr->backend->get_source (cr); } /** * cairo_set_tolerance: * @cr: a #cairo_t * @tolerance: the tolerance, in device units (typically pixels) * * Sets the tolerance used when converting paths into trapezoids. * Curved segments of the path will be subdivided until the maximum * deviation between the original path and the polygonal approximation * is less than @tolerance. The default value is 0.1. A larger * value will give better performance, a smaller value, better * appearance. (Reducing the value from the default value of 0.1 * is unlikely to improve appearance significantly.) The accuracy of paths * within Cairo is limited by the precision of its internal arithmetic, and * the prescribed @tolerance is restricted to the smallest * representable internal value. **/ void cairo_set_tolerance (cairo_t *cr, double tolerance) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->set_tolerance (cr, tolerance); if (unlikely (status)) _cairo_set_error (cr, status); } slim_hidden_def (cairo_set_tolerance); /** * cairo_set_antialias: * @cr: a #cairo_t * @antialias: the new antialiasing mode * * Set the antialiasing mode of the rasterizer used for drawing shapes. * This value is a hint, and a particular backend may or may not support * a particular value. At the current time, no backend supports * %CAIRO_ANTIALIAS_SUBPIXEL when drawing shapes. * * Note that this option does not affect text rendering, instead see * cairo_font_options_set_antialias(). **/ void cairo_set_antialias (cairo_t *cr, cairo_antialias_t antialias) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->set_antialias (cr, antialias); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_set_fill_rule: * @cr: a #cairo_t * @fill_rule: a fill rule, specified as a #cairo_fill_rule_t * * Set the current fill rule within the cairo context. The fill rule * is used to determine which regions are inside or outside a complex * (potentially self-intersecting) path. The current fill rule affects * both cairo_fill() and cairo_clip(). See #cairo_fill_rule_t for details * on the semantics of each available fill rule. * * The default fill rule is %CAIRO_FILL_RULE_WINDING. **/ void cairo_set_fill_rule (cairo_t *cr, cairo_fill_rule_t fill_rule) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->set_fill_rule (cr, fill_rule); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_set_line_width: * @cr: a #cairo_t * @width: a line width * * Sets the current line width within the cairo context. The line * width value specifies the diameter of a pen that is circular in * user space, (though device-space pen may be an ellipse in general * due to scaling/shear/rotation of the CTM). * * Note: When the description above refers to user space and CTM it * refers to the user space and CTM in effect at the time of the * stroking operation, not the user space and CTM in effect at the * time of the call to cairo_set_line_width(). The simplest usage * makes both of these spaces identical. That is, if there is no * change to the CTM between a call to cairo_set_line_width() and the * stroking operation, then one can just pass user-space values to * cairo_set_line_width() and ignore this note. * * As with the other stroke parameters, the current line width is * examined by cairo_stroke(), cairo_stroke_extents(), and * cairo_stroke_to_path(), but does not have any effect during path * construction. * * The default line width value is 2.0. **/ void cairo_set_line_width (cairo_t *cr, double width) { cairo_status_t status; if (unlikely (cr->status)) return; if (width < 0.) width = 0.; status = cr->backend->set_line_width (cr, width); if (unlikely (status)) _cairo_set_error (cr, status); } slim_hidden_def (cairo_set_line_width); /** * cairo_set_line_cap: * @cr: a cairo context * @line_cap: a line cap style * * Sets the current line cap style within the cairo context. See * #cairo_line_cap_t for details about how the available line cap * styles are drawn. * * As with the other stroke parameters, the current line cap style is * examined by cairo_stroke(), cairo_stroke_extents(), and * cairo_stroke_to_path(), but does not have any effect during path * construction. * * The default line cap style is %CAIRO_LINE_CAP_BUTT. **/ void cairo_set_line_cap (cairo_t *cr, cairo_line_cap_t line_cap) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->set_line_cap (cr, line_cap); if (unlikely (status)) _cairo_set_error (cr, status); } slim_hidden_def (cairo_set_line_cap); /** * cairo_set_line_join: * @cr: a cairo context * @line_join: a line join style * * Sets the current line join style within the cairo context. See * #cairo_line_join_t for details about how the available line join * styles are drawn. * * As with the other stroke parameters, the current line join style is * examined by cairo_stroke(), cairo_stroke_extents(), and * cairo_stroke_to_path(), but does not have any effect during path * construction. * * The default line join style is %CAIRO_LINE_JOIN_MITER. **/ void cairo_set_line_join (cairo_t *cr, cairo_line_join_t line_join) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->set_line_join (cr, line_join); if (unlikely (status)) _cairo_set_error (cr, status); } slim_hidden_def (cairo_set_line_join); /** * cairo_set_dash: * @cr: a cairo context * @dashes: an array specifying alternate lengths of on and off stroke portions * @num_dashes: the length of the dashes array * @offset: an offset into the dash pattern at which the stroke should start * * Sets the dash pattern to be used by cairo_stroke(). A dash pattern * is specified by @dashes, an array of positive values. Each value * provides the length of alternate "on" and "off" portions of the * stroke. The @offset specifies an offset into the pattern at which * the stroke begins. * * Each "on" segment will have caps applied as if the segment were a * separate sub-path. In particular, it is valid to use an "on" length * of 0.0 with %CAIRO_LINE_CAP_ROUND or %CAIRO_LINE_CAP_SQUARE in order * to distributed dots or squares along a path. * * Note: The length values are in user-space units as evaluated at the * time of stroking. This is not necessarily the same as the user * space at the time of cairo_set_dash(). * * If @num_dashes is 0 dashing is disabled. * * If @num_dashes is 1 a symmetric pattern is assumed with alternating * on and off portions of the size specified by the single value in * @dashes. * * If any value in @dashes is negative, or if all values are 0, then * @cr will be put into an error state with a status of * %CAIRO_STATUS_INVALID_DASH. **/ void cairo_set_dash (cairo_t *cr, const double *dashes, int num_dashes, double offset) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->set_dash (cr, dashes, num_dashes, offset); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_get_dash_count: * @cr: a #cairo_t * * This function returns the length of the dash array in @cr (0 if dashing * is not currently in effect). * * See also cairo_set_dash() and cairo_get_dash(). * * Return value: the length of the dash array, or 0 if no dash array set. * * Since: 1.4 */ int cairo_get_dash_count (cairo_t *cr) { int num_dashes; if (unlikely (cr->status)) return 0; cr->backend->get_dash (cr, NULL, &num_dashes, NULL); return num_dashes; } /** * cairo_get_dash: * @cr: a #cairo_t * @dashes: return value for the dash array, or %NULL * @offset: return value for the current dash offset, or %NULL * * Gets the current dash array. If not %NULL, @dashes should be big * enough to hold at least the number of values returned by * cairo_get_dash_count(). * * Since: 1.4 **/ void cairo_get_dash (cairo_t *cr, double *dashes, double *offset) { if (unlikely (cr->status)) return; cr->backend->get_dash (cr, dashes, NULL, offset); } /** * cairo_set_miter_limit: * @cr: a cairo context * @limit: miter limit to set * * Sets the current miter limit within the cairo context. * * If the current line join style is set to %CAIRO_LINE_JOIN_MITER * (see cairo_set_line_join()), the miter limit is used to determine * whether the lines should be joined with a bevel instead of a miter. * Cairo divides the length of the miter by the line width. * If the result is greater than the miter limit, the style is * converted to a bevel. * * As with the other stroke parameters, the current line miter limit is * examined by cairo_stroke(), cairo_stroke_extents(), and * cairo_stroke_to_path(), but does not have any effect during path * construction. * * The default miter limit value is 10.0, which will convert joins * with interior angles less than 11 degrees to bevels instead of * miters. For reference, a miter limit of 2.0 makes the miter cutoff * at 60 degrees, and a miter limit of 1.414 makes the cutoff at 90 * degrees. * * A miter limit for a desired angle can be computed as: miter limit = * 1/sin(angle/2) **/ void cairo_set_miter_limit (cairo_t *cr, double limit) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->set_miter_limit (cr, limit); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_translate: * @cr: a cairo context * @tx: amount to translate in the X direction * @ty: amount to translate in the Y direction * * Modifies the current transformation matrix (CTM) by translating the * user-space origin by (@tx, @ty). This offset is interpreted as a * user-space coordinate according to the CTM in place before the new * call to cairo_translate(). In other words, the translation of the * user-space origin takes place after any existing transformation. **/ void cairo_translate (cairo_t *cr, double tx, double ty) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->translate (cr, tx, ty); if (unlikely (status)) _cairo_set_error (cr, status); } slim_hidden_def (cairo_translate); /** * cairo_scale: * @cr: a cairo context * @sx: scale factor for the X dimension * @sy: scale factor for the Y dimension * * Modifies the current transformation matrix (CTM) by scaling the X * and Y user-space axes by @sx and @sy respectively. The scaling of * the axes takes place after any existing transformation of user * space. **/ void cairo_scale (cairo_t *cr, double sx, double sy) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->scale (cr, sx, sy); if (unlikely (status)) _cairo_set_error (cr, status); } slim_hidden_def (cairo_scale); /** * cairo_rotate: * @cr: a cairo context * @angle: angle (in radians) by which the user-space axes will be * rotated * * Modifies the current transformation matrix (CTM) by rotating the * user-space axes by @angle radians. The rotation of the axes takes * places after any existing transformation of user space. The * rotation direction for positive angles is from the positive X axis * toward the positive Y axis. **/ void cairo_rotate (cairo_t *cr, double angle) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->rotate (cr, angle); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_transform: * @cr: a cairo context * @matrix: a transformation to be applied to the user-space axes * * Modifies the current transformation matrix (CTM) by applying * @matrix as an additional transformation. The new transformation of * user space takes place after any existing transformation. **/ void cairo_transform (cairo_t *cr, const cairo_matrix_t *matrix) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->transform (cr, matrix); if (unlikely (status)) _cairo_set_error (cr, status); } slim_hidden_def (cairo_transform); /** * cairo_set_matrix: * @cr: a cairo context * @matrix: a transformation matrix from user space to device space * * Modifies the current transformation matrix (CTM) by setting it * equal to @matrix. **/ void cairo_set_matrix (cairo_t *cr, const cairo_matrix_t *matrix) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->set_matrix (cr, matrix); if (unlikely (status)) _cairo_set_error (cr, status); } slim_hidden_def (cairo_set_matrix); /** * cairo_identity_matrix: * @cr: a cairo context * * Resets the current transformation matrix (CTM) by setting it equal * to the identity matrix. That is, the user-space and device-space * axes will be aligned and one user-space unit will transform to one * device-space unit. **/ void cairo_identity_matrix (cairo_t *cr) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->set_identity_matrix (cr); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_user_to_device: * @cr: a cairo context * @x: X value of coordinate (in/out parameter) * @y: Y value of coordinate (in/out parameter) * * Transform a coordinate from user space to device space by * multiplying the given point by the current transformation matrix * (CTM). **/ void cairo_user_to_device (cairo_t *cr, double *x, double *y) { if (unlikely (cr->status)) return; cr->backend->user_to_device (cr, x, y); } slim_hidden_def (cairo_user_to_device); /** * cairo_user_to_device_distance: * @cr: a cairo context * @dx: X component of a distance vector (in/out parameter) * @dy: Y component of a distance vector (in/out parameter) * * Transform a distance vector from user space to device space. This * function is similar to cairo_user_to_device() except that the * translation components of the CTM will be ignored when transforming * (@dx,@dy). **/ void cairo_user_to_device_distance (cairo_t *cr, double *dx, double *dy) { if (unlikely (cr->status)) return; cr->backend->user_to_device_distance (cr, dx, dy); } slim_hidden_def (cairo_user_to_device_distance); /** * cairo_device_to_user: * @cr: a cairo * @x: X value of coordinate (in/out parameter) * @y: Y value of coordinate (in/out parameter) * * Transform a coordinate from device space to user space by * multiplying the given point by the inverse of the current * transformation matrix (CTM). **/ void cairo_device_to_user (cairo_t *cr, double *x, double *y) { if (unlikely (cr->status)) return; cr->backend->device_to_user (cr, x, y); } slim_hidden_def (cairo_device_to_user); /** * cairo_device_to_user_distance: * @cr: a cairo context * @dx: X component of a distance vector (in/out parameter) * @dy: Y component of a distance vector (in/out parameter) * * Transform a distance vector from device space to user space. This * function is similar to cairo_device_to_user() except that the * translation components of the inverse CTM will be ignored when * transforming (@dx,@dy). **/ void cairo_device_to_user_distance (cairo_t *cr, double *dx, double *dy) { if (unlikely (cr->status)) return; cr->backend->device_to_user_distance (cr, dx, dy); } /** * cairo_new_path: * @cr: a cairo context * * Clears the current path. After this call there will be no path and * no current point. **/ void cairo_new_path (cairo_t *cr) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->new_path (cr); if (unlikely (status)) _cairo_set_error (cr, status); } slim_hidden_def(cairo_new_path); /** * cairo_new_sub_path: * @cr: a cairo context * * Begin a new sub-path. Note that the existing path is not * affected. After this call there will be no current point. * * In many cases, this call is not needed since new sub-paths are * frequently started with cairo_move_to(). * * A call to cairo_new_sub_path() is particularly useful when * beginning a new sub-path with one of the cairo_arc() calls. This * makes things easier as it is no longer necessary to manually * compute the arc's initial coordinates for a call to * cairo_move_to(). * * Since: 1.2 **/ void cairo_new_sub_path (cairo_t *cr) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->new_sub_path (cr); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_move_to: * @cr: a cairo context * @x: the X coordinate of the new position * @y: the Y coordinate of the new position * * Begin a new sub-path. After this call the current point will be (@x, * @y). **/ void cairo_move_to (cairo_t *cr, double x, double y) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->move_to (cr, x, y); if (unlikely (status)) _cairo_set_error (cr, status); } slim_hidden_def(cairo_move_to); /** * cairo_line_to: * @cr: a cairo context * @x: the X coordinate of the end of the new line * @y: the Y coordinate of the end of the new line * * Adds a line to the path from the current point to position (@x, @y) * in user-space coordinates. After this call the current point * will be (@x, @y). * * If there is no current point before the call to cairo_line_to() * this function will behave as cairo_move_to(@cr, @x, @y). **/ void cairo_line_to (cairo_t *cr, double x, double y) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->line_to (cr, x, y); if (unlikely (status)) _cairo_set_error (cr, status); } slim_hidden_def (cairo_line_to); /** * cairo_curve_to: * @cr: a cairo context * @x1: the X coordinate of the first control point * @y1: the Y coordinate of the first control point * @x2: the X coordinate of the second control point * @y2: the Y coordinate of the second control point * @x3: the X coordinate of the end of the curve * @y3: the Y coordinate of the end of the curve * * Adds a cubic Bézier spline to the path from the current point to * position (@x3, @y3) in user-space coordinates, using (@x1, @y1) and * (@x2, @y2) as the control points. After this call the current point * will be (@x3, @y3). * * If there is no current point before the call to cairo_curve_to() * this function will behave as if preceded by a call to * cairo_move_to(@cr, @x1, @y1). **/ void cairo_curve_to (cairo_t *cr, double x1, double y1, double x2, double y2, double x3, double y3) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->curve_to (cr, x1, y1, x2, y2, x3, y3); if (unlikely (status)) _cairo_set_error (cr, status); } slim_hidden_def (cairo_curve_to); /** * cairo_arc: * @cr: a cairo context * @xc: X position of the center of the arc * @yc: Y position of the center of the arc * @radius: the radius of the arc * @angle1: the start angle, in radians * @angle2: the end angle, in radians * * Adds a circular arc of the given @radius to the current path. The * arc is centered at (@xc, @yc), begins at @angle1 and proceeds in * the direction of increasing angles to end at @angle2. If @angle2 is * less than @angle1 it will be progressively increased by * 2*M_PI until it is greater than @angle1. * * If there is a current point, an initial line segment will be added * to the path to connect the current point to the beginning of the * arc. If this initial line is undesired, it can be avoided by * calling cairo_new_sub_path() before calling cairo_arc(). * * Angles are measured in radians. An angle of 0.0 is in the direction * of the positive X axis (in user space). An angle of * M_PI/2.0 radians (90 degrees) is in the * direction of the positive Y axis (in user space). Angles increase * in the direction from the positive X axis toward the positive Y * axis. So with the default transformation matrix, angles increase in * a clockwise direction. * * (To convert from degrees to radians, use degrees * (M_PI / * 180.).) * * This function gives the arc in the direction of increasing angles; * see cairo_arc_negative() to get the arc in the direction of * decreasing angles. * * The arc is circular in user space. To achieve an elliptical arc, * you can scale the current transformation matrix by different * amounts in the X and Y directions. For example, to draw an ellipse * in the box given by @x, @y, @width, @height: * * * cairo_save (cr); * cairo_translate (cr, x + width / 2., y + height / 2.); * cairo_scale (cr, width / 2., height / 2.); * cairo_arc (cr, 0., 0., 1., 0., 2 * M_PI); * cairo_restore (cr); * **/ void cairo_arc (cairo_t *cr, double xc, double yc, double radius, double angle1, double angle2) { cairo_status_t status; if (unlikely (cr->status)) return; if (angle2 < angle1) { /* increase angle2 by multiples of full circle until it * satisfies angle2 >= angle1 */ angle2 = fmod (angle2 - angle1, 2 * M_PI); if (angle2 < 0) angle2 += 2 * M_PI; angle2 += angle1; } status = cr->backend->arc (cr, xc, yc, radius, angle1, angle2, TRUE); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_arc_negative: * @cr: a cairo context * @xc: X position of the center of the arc * @yc: Y position of the center of the arc * @radius: the radius of the arc * @angle1: the start angle, in radians * @angle2: the end angle, in radians * * Adds a circular arc of the given @radius to the current path. The * arc is centered at (@xc, @yc), begins at @angle1 and proceeds in * the direction of decreasing angles to end at @angle2. If @angle2 is * greater than @angle1 it will be progressively decreased by * 2*M_PI until it is less than @angle1. * * See cairo_arc() for more details. This function differs only in the * direction of the arc between the two angles. **/ void cairo_arc_negative (cairo_t *cr, double xc, double yc, double radius, double angle1, double angle2) { cairo_status_t status; if (unlikely (cr->status)) return; if (angle2 > angle1) { /* decrease angle2 by multiples of full circle until it * satisfies angle2 <= angle1 */ angle2 = fmod (angle2 - angle1, 2 * M_PI); if (angle2 > 0) angle2 -= 2 * M_PI; angle2 += angle1; } status = cr->backend->arc (cr, xc, yc, radius, angle1, angle2, FALSE); if (unlikely (status)) _cairo_set_error (cr, status); } /* XXX: NYI void cairo_arc_to (cairo_t *cr, double x1, double y1, double x2, double y2, double radius) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->arc_to (cr, x1, y1, x2, y2, radius); if (unlikely (status)) _cairo_set_error (cr, status); } void cairo_rel_arc_to (cairo_t *cr, double dx1, double dy1, double dx2, double dy2, double radius) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->rel_arc_to (cr, dx1, dy1, dx2, dy2, radius); if (unlikely (status)) _cairo_set_error (cr, status); } */ /** * cairo_rel_move_to: * @cr: a cairo context * @dx: the X offset * @dy: the Y offset * * Begin a new sub-path. After this call the current point will offset * by (@x, @y). * * Given a current point of (x, y), cairo_rel_move_to(@cr, @dx, @dy) * is logically equivalent to cairo_move_to(@cr, x + @dx, y + @dy). * * It is an error to call this function with no current point. Doing * so will cause @cr to shutdown with a status of * %CAIRO_STATUS_NO_CURRENT_POINT. **/ void cairo_rel_move_to (cairo_t *cr, double dx, double dy) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->rel_move_to (cr, dx, dy); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_rel_line_to: * @cr: a cairo context * @dx: the X offset to the end of the new line * @dy: the Y offset to the end of the new line * * Relative-coordinate version of cairo_line_to(). Adds a line to the * path from the current point to a point that is offset from the * current point by (@dx, @dy) in user space. After this call the * current point will be offset by (@dx, @dy). * * Given a current point of (x, y), cairo_rel_line_to(@cr, @dx, @dy) * is logically equivalent to cairo_line_to(@cr, x + @dx, y + @dy). * * It is an error to call this function with no current point. Doing * so will cause @cr to shutdown with a status of * %CAIRO_STATUS_NO_CURRENT_POINT. **/ void cairo_rel_line_to (cairo_t *cr, double dx, double dy) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->rel_line_to (cr, dx, dy); if (unlikely (status)) _cairo_set_error (cr, status); } slim_hidden_def(cairo_rel_line_to); /** * cairo_rel_curve_to: * @cr: a cairo context * @dx1: the X offset to the first control point * @dy1: the Y offset to the first control point * @dx2: the X offset to the second control point * @dy2: the Y offset to the second control point * @dx3: the X offset to the end of the curve * @dy3: the Y offset to the end of the curve * * Relative-coordinate version of cairo_curve_to(). All offsets are * relative to the current point. Adds a cubic Bézier spline to the * path from the current point to a point offset from the current * point by (@dx3, @dy3), using points offset by (@dx1, @dy1) and * (@dx2, @dy2) as the control points. After this call the current * point will be offset by (@dx3, @dy3). * * Given a current point of (x, y), cairo_rel_curve_to(@cr, @dx1, * @dy1, @dx2, @dy2, @dx3, @dy3) is logically equivalent to * cairo_curve_to(@cr, x+@dx1, y+@dy1, x+@dx2, y+@dy2, x+@dx3, y+@dy3). * * It is an error to call this function with no current point. Doing * so will cause @cr to shutdown with a status of * %CAIRO_STATUS_NO_CURRENT_POINT. **/ void cairo_rel_curve_to (cairo_t *cr, double dx1, double dy1, double dx2, double dy2, double dx3, double dy3) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->rel_curve_to (cr, dx1, dy1, dx2, dy2, dx3, dy3); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_rectangle: * @cr: a cairo context * @x: the X coordinate of the top left corner of the rectangle * @y: the Y coordinate to the top left corner of the rectangle * @width: the width of the rectangle * @height: the height of the rectangle * * Adds a closed sub-path rectangle of the given size to the current * path at position (@x, @y) in user-space coordinates. * * This function is logically equivalent to: * * cairo_move_to (cr, x, y); * cairo_rel_line_to (cr, width, 0); * cairo_rel_line_to (cr, 0, height); * cairo_rel_line_to (cr, -width, 0); * cairo_close_path (cr); * **/ void cairo_rectangle (cairo_t *cr, double x, double y, double width, double height) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->rectangle (cr, x, y, width, height); if (unlikely (status)) _cairo_set_error (cr, status); } #if 0 /* XXX: NYI */ void cairo_stroke_to_path (cairo_t *cr) { cairo_status_t status; if (unlikely (cr->status)) return; /* The code in _cairo_recording_surface_get_path has a poorman's stroke_to_path */ status = _cairo_gstate_stroke_path (cr->gstate); if (unlikely (status)) _cairo_set_error (cr, status); } #endif /** * cairo_close_path: * @cr: a cairo context * * Adds a line segment to the path from the current point to the * beginning of the current sub-path, (the most recent point passed to * cairo_move_to()), and closes this sub-path. After this call the * current point will be at the joined endpoint of the sub-path. * * The behavior of cairo_close_path() is distinct from simply calling * cairo_line_to() with the equivalent coordinate in the case of * stroking. When a closed sub-path is stroked, there are no caps on * the ends of the sub-path. Instead, there is a line join connecting * the final and initial segments of the sub-path. * * If there is no current point before the call to cairo_close_path(), * this function will have no effect. * * Note: As of cairo version 1.2.4 any call to cairo_close_path() will * place an explicit MOVE_TO element into the path immediately after * the CLOSE_PATH element, (which can be seen in cairo_copy_path() for * example). This can simplify path processing in some cases as it may * not be necessary to save the "last move_to point" during processing * as the MOVE_TO immediately after the CLOSE_PATH will provide that * point. **/ void cairo_close_path (cairo_t *cr) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->close_path (cr); if (unlikely (status)) _cairo_set_error (cr, status); } slim_hidden_def(cairo_close_path); /** * cairo_path_extents: * @cr: a cairo context * @x1: left of the resulting extents * @y1: top of the resulting extents * @x2: right of the resulting extents * @y2: bottom of the resulting extents * * Computes a bounding box in user-space coordinates covering the * points on the current path. If the current path is empty, returns * an empty rectangle ((0,0), (0,0)). Stroke parameters, fill rule, * surface dimensions and clipping are not taken into account. * * Contrast with cairo_fill_extents() and cairo_stroke_extents() which * return the extents of only the area that would be "inked" by * the corresponding drawing operations. * * The result of cairo_path_extents() is defined as equivalent to the * limit of cairo_stroke_extents() with %CAIRO_LINE_CAP_ROUND as the * line width approaches 0.0, (but never reaching the empty-rectangle * returned by cairo_stroke_extents() for a line width of 0.0). * * Specifically, this means that zero-area sub-paths such as * cairo_move_to();cairo_line_to() segments, (even degenerate cases * where the coordinates to both calls are identical), will be * considered as contributing to the extents. However, a lone * cairo_move_to() will not contribute to the results of * cairo_path_extents(). * * Since: 1.6 **/ void cairo_path_extents (cairo_t *cr, double *x1, double *y1, double *x2, double *y2) { if (unlikely (cr->status)) { if (x1) *x1 = 0.0; if (y1) *y1 = 0.0; if (x2) *x2 = 0.0; if (y2) *y2 = 0.0; return; } cr->backend->path_extents (cr, x1, y1, x2, y2); } /** * cairo_paint: * @cr: a cairo context * * A drawing operator that paints the current source everywhere within * the current clip region. **/ void cairo_paint (cairo_t *cr) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->paint (cr); if (unlikely (status)) _cairo_set_error (cr, status); } slim_hidden_def (cairo_paint); /** * cairo_paint_with_alpha: * @cr: a cairo context * @alpha: alpha value, between 0 (transparent) and 1 (opaque) * * A drawing operator that paints the current source everywhere within * the current clip region using a mask of constant alpha value * @alpha. The effect is similar to cairo_paint(), but the drawing * is faded out using the alpha value. **/ void cairo_paint_with_alpha (cairo_t *cr, double alpha) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->paint_with_alpha (cr, alpha); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_mask: * @cr: a cairo context * @pattern: a #cairo_pattern_t * * A drawing operator that paints the current source * using the alpha channel of @pattern as a mask. (Opaque * areas of @pattern are painted with the source, transparent * areas are not painted.) */ void cairo_mask (cairo_t *cr, cairo_pattern_t *pattern) { cairo_status_t status; if (unlikely (cr->status)) return; if (unlikely (pattern == NULL)) { _cairo_set_error (cr, CAIRO_STATUS_NULL_POINTER); return; } if (unlikely (pattern->status)) { _cairo_set_error (cr, pattern->status); return; } status = cr->backend->mask (cr, pattern); if (unlikely (status)) _cairo_set_error (cr, status); } slim_hidden_def (cairo_mask); /** * cairo_mask_surface: * @cr: a cairo context * @surface: a #cairo_surface_t * @surface_x: X coordinate at which to place the origin of @surface * @surface_y: Y coordinate at which to place the origin of @surface * * A drawing operator that paints the current source * using the alpha channel of @surface as a mask. (Opaque * areas of @surface are painted with the source, transparent * areas are not painted.) */ void cairo_mask_surface (cairo_t *cr, cairo_surface_t *surface, double surface_x, double surface_y) { cairo_pattern_t *pattern; cairo_matrix_t matrix; if (unlikely (cr->status)) return; pattern = cairo_pattern_create_for_surface (surface); cairo_matrix_init_translate (&matrix, - surface_x, - surface_y); cairo_pattern_set_matrix (pattern, &matrix); cairo_mask (cr, pattern); cairo_pattern_destroy (pattern); } /** * cairo_stroke: * @cr: a cairo context * * A drawing operator that strokes the current path according to the * current line width, line join, line cap, and dash settings. After * cairo_stroke(), the current path will be cleared from the cairo * context. See cairo_set_line_width(), cairo_set_line_join(), * cairo_set_line_cap(), cairo_set_dash(), and * cairo_stroke_preserve(). * * Note: Degenerate segments and sub-paths are treated specially and * provide a useful result. These can result in two different * situations: * * 1. Zero-length "on" segments set in cairo_set_dash(). If the cap * style is %CAIRO_LINE_CAP_ROUND or %CAIRO_LINE_CAP_SQUARE then these * segments will be drawn as circular dots or squares respectively. In * the case of %CAIRO_LINE_CAP_SQUARE, the orientation of the squares * is determined by the direction of the underlying path. * * 2. A sub-path created by cairo_move_to() followed by either a * cairo_close_path() or one or more calls to cairo_line_to() to the * same coordinate as the cairo_move_to(). If the cap style is * %CAIRO_LINE_CAP_ROUND then these sub-paths will be drawn as circular * dots. Note that in the case of %CAIRO_LINE_CAP_SQUARE a degenerate * sub-path will not be drawn at all, (since the correct orientation * is indeterminate). * * In no case will a cap style of %CAIRO_LINE_CAP_BUTT cause anything * to be drawn in the case of either degenerate segments or sub-paths. **/ void cairo_stroke (cairo_t *cr) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->stroke (cr); if (unlikely (status)) _cairo_set_error (cr, status); } slim_hidden_def(cairo_stroke); /** * cairo_stroke_preserve: * @cr: a cairo context * * A drawing operator that strokes the current path according to the * current line width, line join, line cap, and dash settings. Unlike * cairo_stroke(), cairo_stroke_preserve() preserves the path within the * cairo context. * * See cairo_set_line_width(), cairo_set_line_join(), * cairo_set_line_cap(), cairo_set_dash(), and * cairo_stroke_preserve(). **/ void cairo_stroke_preserve (cairo_t *cr) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->stroke_preserve (cr); if (unlikely (status)) _cairo_set_error (cr, status); } slim_hidden_def(cairo_stroke_preserve); /** * cairo_fill: * @cr: a cairo context * * A drawing operator that fills the current path according to the * current fill rule, (each sub-path is implicitly closed before being * filled). After cairo_fill(), the current path will be cleared from * the cairo context. See cairo_set_fill_rule() and * cairo_fill_preserve(). **/ void cairo_fill (cairo_t *cr) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->fill (cr); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_fill_preserve: * @cr: a cairo context * * A drawing operator that fills the current path according to the * current fill rule, (each sub-path is implicitly closed before being * filled). Unlike cairo_fill(), cairo_fill_preserve() preserves the * path within the cairo context. * * See cairo_set_fill_rule() and cairo_fill(). **/ void cairo_fill_preserve (cairo_t *cr) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->fill_preserve (cr); if (unlikely (status)) _cairo_set_error (cr, status); } slim_hidden_def(cairo_fill_preserve); /** * cairo_copy_page: * @cr: a cairo context * * Emits the current page for backends that support multiple pages, but * doesn't clear it, so, the contents of the current page will be retained * for the next page too. Use cairo_show_page() if you want to get an * empty page after the emission. * * This is a convenience function that simply calls * cairo_surface_copy_page() on @cr's target. **/ void cairo_copy_page (cairo_t *cr) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->copy_page (cr); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_show_page: * @cr: a cairo context * * Emits and clears the current page for backends that support multiple * pages. Use cairo_copy_page() if you don't want to clear the page. * * This is a convenience function that simply calls * cairo_surface_show_page() on @cr's target. **/ void cairo_show_page (cairo_t *cr) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->show_page (cr); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_in_stroke: * @cr: a cairo context * @x: X coordinate of the point to test * @y: Y coordinate of the point to test * * Tests whether the given point is inside the area that would be * affected by a cairo_stroke() operation given the current path and * stroking parameters. Surface dimensions and clipping are not taken * into account. * * See cairo_stroke(), cairo_set_line_width(), cairo_set_line_join(), * cairo_set_line_cap(), cairo_set_dash(), and * cairo_stroke_preserve(). * * Return value: A non-zero value if the point is inside, or zero if * outside. **/ cairo_bool_t cairo_in_stroke (cairo_t *cr, double x, double y) { cairo_status_t status; cairo_bool_t inside = FALSE; if (unlikely (cr->status)) return FALSE; status = cr->backend->in_stroke (cr, x, y, &inside); if (unlikely (status)) _cairo_set_error (cr, status); return inside; } /** * cairo_in_fill: * @cr: a cairo context * @x: X coordinate of the point to test * @y: Y coordinate of the point to test * * Tests whether the given point is inside the area that would be * affected by a cairo_fill() operation given the current path and * filling parameters. Surface dimensions and clipping are not taken * into account. * * See cairo_fill(), cairo_set_fill_rule() and cairo_fill_preserve(). * * Return value: A non-zero value if the point is inside, or zero if * outside. **/ cairo_bool_t cairo_in_fill (cairo_t *cr, double x, double y) { cairo_status_t status; cairo_bool_t inside = FALSE; if (unlikely (cr->status)) return FALSE; status = cr->backend->in_fill (cr, x, y, &inside); if (unlikely (status)) _cairo_set_error (cr, status); return inside; } /** * cairo_stroke_extents: * @cr: a cairo context * @x1: left of the resulting extents * @y1: top of the resulting extents * @x2: right of the resulting extents * @y2: bottom of the resulting extents * * Computes a bounding box in user coordinates covering the area that * would be affected, (the "inked" area), by a cairo_stroke() * operation given the current path and stroke parameters. * If the current path is empty, returns an empty rectangle ((0,0), (0,0)). * Surface dimensions and clipping are not taken into account. * * Note that if the line width is set to exactly zero, then * cairo_stroke_extents() will return an empty rectangle. Contrast with * cairo_path_extents() which can be used to compute the non-empty * bounds as the line width approaches zero. * * Note that cairo_stroke_extents() must necessarily do more work to * compute the precise inked areas in light of the stroke parameters, * so cairo_path_extents() may be more desirable for sake of * performance if non-inked path extents are desired. * * See cairo_stroke(), cairo_set_line_width(), cairo_set_line_join(), * cairo_set_line_cap(), cairo_set_dash(), and * cairo_stroke_preserve(). **/ void cairo_stroke_extents (cairo_t *cr, double *x1, double *y1, double *x2, double *y2) { cairo_status_t status; if (unlikely (cr->status)) { if (x1) *x1 = 0.0; if (y1) *y1 = 0.0; if (x2) *x2 = 0.0; if (y2) *y2 = 0.0; return; } status = cr->backend->stroke_extents (cr, x1, y1, x2, y2); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_fill_extents: * @cr: a cairo context * @x1: left of the resulting extents * @y1: top of the resulting extents * @x2: right of the resulting extents * @y2: bottom of the resulting extents * * Computes a bounding box in user coordinates covering the area that * would be affected, (the "inked" area), by a cairo_fill() operation * given the current path and fill parameters. If the current path is * empty, returns an empty rectangle ((0,0), (0,0)). Surface * dimensions and clipping are not taken into account. * * Contrast with cairo_path_extents(), which is similar, but returns * non-zero extents for some paths with no inked area, (such as a * simple line segment). * * Note that cairo_fill_extents() must necessarily do more work to * compute the precise inked areas in light of the fill rule, so * cairo_path_extents() may be more desirable for sake of performance * if the non-inked path extents are desired. * * See cairo_fill(), cairo_set_fill_rule() and cairo_fill_preserve(). **/ void cairo_fill_extents (cairo_t *cr, double *x1, double *y1, double *x2, double *y2) { cairo_status_t status; if (unlikely (cr->status)) { if (x1) *x1 = 0.0; if (y1) *y1 = 0.0; if (x2) *x2 = 0.0; if (y2) *y2 = 0.0; return; } status = cr->backend->fill_extents (cr, x1, y1, x2, y2); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_clip: * @cr: a cairo context * * Establishes a new clip region by intersecting the current clip * region with the current path as it would be filled by cairo_fill() * and according to the current fill rule (see cairo_set_fill_rule()). * * After cairo_clip(), the current path will be cleared from the cairo * context. * * The current clip region affects all drawing operations by * effectively masking out any changes to the surface that are outside * the current clip region. * * Calling cairo_clip() can only make the clip region smaller, never * larger. But the current clip is part of the graphics state, so a * temporary restriction of the clip region can be achieved by * calling cairo_clip() within a cairo_save()/cairo_restore() * pair. The only other means of increasing the size of the clip * region is cairo_reset_clip(). **/ void cairo_clip (cairo_t *cr) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->clip (cr); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_clip_preserve: * @cr: a cairo context * * Establishes a new clip region by intersecting the current clip * region with the current path as it would be filled by cairo_fill() * and according to the current fill rule (see cairo_set_fill_rule()). * * Unlike cairo_clip(), cairo_clip_preserve() preserves the path within * the cairo context. * * The current clip region affects all drawing operations by * effectively masking out any changes to the surface that are outside * the current clip region. * * Calling cairo_clip_preserve() can only make the clip region smaller, never * larger. But the current clip is part of the graphics state, so a * temporary restriction of the clip region can be achieved by * calling cairo_clip_preserve() within a cairo_save()/cairo_restore() * pair. The only other means of increasing the size of the clip * region is cairo_reset_clip(). **/ void cairo_clip_preserve (cairo_t *cr) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->clip_preserve (cr); if (unlikely (status)) _cairo_set_error (cr, status); } slim_hidden_def(cairo_clip_preserve); /** * cairo_reset_clip: * @cr: a cairo context * * Reset the current clip region to its original, unrestricted * state. That is, set the clip region to an infinitely large shape * containing the target surface. Equivalently, if infinity is too * hard to grasp, one can imagine the clip region being reset to the * exact bounds of the target surface. * * Note that code meant to be reusable should not call * cairo_reset_clip() as it will cause results unexpected by * higher-level code which calls cairo_clip(). Consider using * cairo_save() and cairo_restore() around cairo_clip() as a more * robust means of temporarily restricting the clip region. **/ void cairo_reset_clip (cairo_t *cr) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->reset_clip (cr); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_clip_extents: * @cr: a cairo context * @x1: left of the resulting extents * @y1: top of the resulting extents * @x2: right of the resulting extents * @y2: bottom of the resulting extents * * Computes a bounding box in user coordinates covering the area inside the * current clip. * * Since: 1.4 **/ void cairo_clip_extents (cairo_t *cr, double *x1, double *y1, double *x2, double *y2) { cairo_status_t status; if (x1) *x1 = 0.0; if (y1) *y1 = 0.0; if (x2) *x2 = 0.0; if (y2) *y2 = 0.0; if (unlikely (cr->status)) return; status = cr->backend->clip_extents (cr, x1, y1, x2, y2); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_in_clip: * @cr: a cairo context * @x: X coordinate of the point to test * @y: Y coordinate of the point to test * * Tests whether the given point is inside the area that would be * visible through the current clip, i.e. the area that would be filled by * a cairo_paint() operation. * * See cairo_clip(), and cairo_clip_preserve(). * * Return value: A non-zero value if the point is inside, or zero if * outside. * * Since: 1.10 **/ cairo_bool_t cairo_in_clip (cairo_t *cr, double x, double y) { cairo_status_t status; cairo_bool_t inside = FALSE; if (unlikely (cr->status)) return FALSE; status = cr->backend->in_clip (cr, x, y, &inside); if (unlikely (status)) _cairo_set_error (cr, status); return inside; } /** * cairo_copy_clip_rectangle_list: * @cr: a cairo context * * Gets the current clip region as a list of rectangles in user coordinates. * Never returns %NULL. * * The status in the list may be %CAIRO_STATUS_CLIP_NOT_REPRESENTABLE to * indicate that the clip region cannot be represented as a list of * user-space rectangles. The status may have other values to indicate * other errors. * * Returns: the current clip region as a list of rectangles in user coordinates, * which should be destroyed using cairo_rectangle_list_destroy(). * * Since: 1.4 **/ cairo_rectangle_list_t * cairo_copy_clip_rectangle_list (cairo_t *cr) { if (unlikely (cr->status)) return _cairo_rectangle_list_create_in_error (cr->status); return cr->backend->clip_copy_rectangle_list (cr); } /** * cairo_select_font_face: * @cr: a #cairo_t * @family: a font family name, encoded in UTF-8 * @slant: the slant for the font * @weight: the weight for the font * * Note: The cairo_select_font_face() function call is part of what * the cairo designers call the "toy" text API. It is convenient for * short demos and simple programs, but it is not expected to be * adequate for serious text-using applications. * * Selects a family and style of font from a simplified description as * a family name, slant and weight. Cairo provides no operation to * list available family names on the system (this is a "toy", * remember), but the standard CSS2 generic family names, ("serif", * "sans-serif", "cursive", "fantasy", "monospace"), are likely to * work as expected. * * If @family starts with the string "@cairo:", or if no native font * backends are compiled in, cairo will use an internal font family. * The internal font family recognizes many modifiers in the @family * string, most notably, it recognizes the string "monospace". That is, * the family name "@cairo:monospace" will use the monospace version of * the internal font family. * * For "real" font selection, see the font-backend-specific * font_face_create functions for the font backend you are using. (For * example, if you are using the freetype-based cairo-ft font backend, * see cairo_ft_font_face_create_for_ft_face() or * cairo_ft_font_face_create_for_pattern().) The resulting font face * could then be used with cairo_scaled_font_create() and * cairo_set_scaled_font(). * * Similarly, when using the "real" font support, you can call * directly into the underlying font system, (such as fontconfig or * freetype), for operations such as listing available fonts, etc. * * It is expected that most applications will need to use a more * comprehensive font handling and text layout library, (for example, * pango), in conjunction with cairo. * * If text is drawn without a call to cairo_select_font_face(), (nor * cairo_set_font_face() nor cairo_set_scaled_font()), the default * family is platform-specific, but is essentially "sans-serif". * Default slant is %CAIRO_FONT_SLANT_NORMAL, and default weight is * %CAIRO_FONT_WEIGHT_NORMAL. * * This function is equivalent to a call to cairo_toy_font_face_create() * followed by cairo_set_font_face(). **/ void cairo_select_font_face (cairo_t *cr, const char *family, cairo_font_slant_t slant, cairo_font_weight_t weight) { cairo_font_face_t *font_face; cairo_status_t status; if (unlikely (cr->status)) return; font_face = cairo_toy_font_face_create (family, slant, weight); if (unlikely (font_face->status)) { _cairo_set_error (cr, font_face->status); return; } status = cr->backend->set_font_face (cr, font_face); cairo_font_face_destroy (font_face); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_font_extents: * @cr: a #cairo_t * @extents: a #cairo_font_extents_t object into which the results * will be stored. * * Gets the font extents for the currently selected font. **/ void cairo_font_extents (cairo_t *cr, cairo_font_extents_t *extents) { cairo_status_t status; extents->ascent = 0.0; extents->descent = 0.0; extents->height = 0.0; extents->max_x_advance = 0.0; extents->max_y_advance = 0.0; if (unlikely (cr->status)) return; status = cr->backend->font_extents (cr, extents); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_set_font_face: * @cr: a #cairo_t * @font_face: a #cairo_font_face_t, or %NULL to restore to the default font * * Replaces the current #cairo_font_face_t object in the #cairo_t with * @font_face. The replaced font face in the #cairo_t will be * destroyed if there are no other references to it. **/ void cairo_set_font_face (cairo_t *cr, cairo_font_face_t *font_face) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->set_font_face (cr, font_face); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_get_font_face: * @cr: a #cairo_t * * Gets the current font face for a #cairo_t. * * Return value: the current font face. This object is owned by * cairo. To keep a reference to it, you must call * cairo_font_face_reference(). * * This function never returns %NULL. If memory cannot be allocated, a * special "nil" #cairo_font_face_t object will be returned on which * cairo_font_face_status() returns %CAIRO_STATUS_NO_MEMORY. Using * this nil object will cause its error state to propagate to other * objects it is passed to, (for example, calling * cairo_set_font_face() with a nil font will trigger an error that * will shutdown the #cairo_t object). **/ cairo_font_face_t * cairo_get_font_face (cairo_t *cr) { if (unlikely (cr->status)) return (cairo_font_face_t*) &_cairo_font_face_nil; return cr->backend->get_font_face (cr); } /** * cairo_set_font_size: * @cr: a #cairo_t * @size: the new font size, in user space units * * Sets the current font matrix to a scale by a factor of @size, replacing * any font matrix previously set with cairo_set_font_size() or * cairo_set_font_matrix(). This results in a font size of @size user space * units. (More precisely, this matrix will result in the font's * em-square being a @size by @size square in user space.) * * If text is drawn without a call to cairo_set_font_size(), (nor * cairo_set_font_matrix() nor cairo_set_scaled_font()), the default * font size is 10.0. **/ void cairo_set_font_size (cairo_t *cr, double size) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->set_font_size (cr, size); if (unlikely (status)) _cairo_set_error (cr, status); } slim_hidden_def (cairo_set_font_size); /** * cairo_set_font_matrix * @cr: a #cairo_t * @matrix: a #cairo_matrix_t describing a transform to be applied to * the current font. * * Sets the current font matrix to @matrix. The font matrix gives a * transformation from the design space of the font (in this space, * the em-square is 1 unit by 1 unit) to user space. Normally, a * simple scale is used (see cairo_set_font_size()), but a more * complex font matrix can be used to shear the font * or stretch it unequally along the two axes **/ void cairo_set_font_matrix (cairo_t *cr, const cairo_matrix_t *matrix) { cairo_status_t status; if (unlikely (cr->status)) return; status = cr->backend->set_font_matrix (cr, matrix); if (unlikely (status)) _cairo_set_error (cr, status); } slim_hidden_def (cairo_set_font_matrix); /** * cairo_get_font_matrix * @cr: a #cairo_t * @matrix: return value for the matrix * * Stores the current font matrix into @matrix. See * cairo_set_font_matrix(). **/ void cairo_get_font_matrix (cairo_t *cr, cairo_matrix_t *matrix) { if (unlikely (cr->status)) { cairo_matrix_init_identity (matrix); return; } cr->backend->get_font_matrix (cr, matrix); } /** * cairo_set_font_options: * @cr: a #cairo_t * @options: font options to use * * Sets a set of custom font rendering options for the #cairo_t. * Rendering options are derived by merging these options with the * options derived from underlying surface; if the value in @options * has a default value (like %CAIRO_ANTIALIAS_DEFAULT), then the value * from the surface is used. **/ void cairo_set_font_options (cairo_t *cr, const cairo_font_options_t *options) { cairo_status_t status; if (unlikely (cr->status)) return; status = cairo_font_options_status ((cairo_font_options_t *) options); if (unlikely (status)) { _cairo_set_error (cr, status); return; } status = cr->backend->set_font_options (cr, options); if (unlikely (status)) _cairo_set_error (cr, status); } slim_hidden_def (cairo_set_font_options); /** * cairo_get_font_options: * @cr: a #cairo_t * @options: a #cairo_font_options_t object into which to store * the retrieved options. All existing values are overwritten * * Retrieves font rendering options set via #cairo_set_font_options. * Note that the returned options do not include any options derived * from the underlying surface; they are literally the options * passed to cairo_set_font_options(). **/ void cairo_get_font_options (cairo_t *cr, cairo_font_options_t *options) { /* check that we aren't trying to overwrite the nil object */ if (cairo_font_options_status (options)) return; if (unlikely (cr->status)) { _cairo_font_options_init_default (options); return; } cr->backend->get_font_options (cr, options); } /** * cairo_set_scaled_font: * @cr: a #cairo_t * @scaled_font: a #cairo_scaled_font_t * * Replaces the current font face, font matrix, and font options in * the #cairo_t with those of the #cairo_scaled_font_t. Except for * some translation, the current CTM of the #cairo_t should be the * same as that of the #cairo_scaled_font_t, which can be accessed * using cairo_scaled_font_get_ctm(). * * Since: 1.2 **/ void cairo_set_scaled_font (cairo_t *cr, const cairo_scaled_font_t *scaled_font) { cairo_status_t status; if (unlikely (cr->status)) return; if ((scaled_font == NULL)) { _cairo_set_error (cr, _cairo_error (CAIRO_STATUS_NULL_POINTER)); return; } status = scaled_font->status; if (unlikely (status)) { _cairo_set_error (cr, status); return; } status = cr->backend->set_scaled_font (cr, (cairo_scaled_font_t *) scaled_font); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_get_scaled_font: * @cr: a #cairo_t * * Gets the current scaled font for a #cairo_t. * * Return value: the current scaled font. This object is owned by * cairo. To keep a reference to it, you must call * cairo_scaled_font_reference(). * * This function never returns %NULL. If memory cannot be allocated, a * special "nil" #cairo_scaled_font_t object will be returned on which * cairo_scaled_font_status() returns %CAIRO_STATUS_NO_MEMORY. Using * this nil object will cause its error state to propagate to other * objects it is passed to, (for example, calling * cairo_set_scaled_font() with a nil font will trigger an error that * will shutdown the #cairo_t object). * * Since: 1.4 **/ cairo_scaled_font_t * cairo_get_scaled_font (cairo_t *cr) { if (unlikely (cr->status)) return _cairo_scaled_font_create_in_error (cr->status); return cr->backend->get_scaled_font (cr); } slim_hidden_def (cairo_get_scaled_font); /** * cairo_text_extents: * @cr: a #cairo_t * @utf8: a NUL-terminated string of text encoded in UTF-8, or %NULL * @extents: a #cairo_text_extents_t object into which the results * will be stored * * Gets the extents for a string of text. The extents describe a * user-space rectangle that encloses the "inked" portion of the text, * (as it would be drawn by cairo_show_text()). Additionally, the * x_advance and y_advance values indicate the amount by which the * current point would be advanced by cairo_show_text(). * * Note that whitespace characters do not directly contribute to the * size of the rectangle (extents.width and extents.height). They do * contribute indirectly by changing the position of non-whitespace * characters. In particular, trailing whitespace characters are * likely to not affect the size of the rectangle, though they will * affect the x_advance and y_advance values. **/ void cairo_text_extents (cairo_t *cr, const char *utf8, cairo_text_extents_t *extents) { cairo_status_t status; cairo_scaled_font_t *scaled_font; cairo_glyph_t *glyphs = NULL; int num_glyphs = 0; double x, y; extents->x_bearing = 0.0; extents->y_bearing = 0.0; extents->width = 0.0; extents->height = 0.0; extents->x_advance = 0.0; extents->y_advance = 0.0; if (unlikely (cr->status)) return; if (utf8 == NULL) return; scaled_font = cairo_get_scaled_font (cr); if (unlikely (scaled_font->status)) { _cairo_set_error (cr, scaled_font->status); return; } cairo_get_current_point (cr, &x, &y); status = cairo_scaled_font_text_to_glyphs (scaled_font, x, y, utf8, -1, &glyphs, &num_glyphs, NULL, NULL, NULL); if (likely (status == CAIRO_STATUS_SUCCESS)) { status = cr->backend->glyph_extents (cr, glyphs, num_glyphs, extents); } cairo_glyph_free (glyphs); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_glyph_extents: * @cr: a #cairo_t * @glyphs: an array of #cairo_glyph_t objects * @num_glyphs: the number of elements in @glyphs * @extents: a #cairo_text_extents_t object into which the results * will be stored * * Gets the extents for an array of glyphs. The extents describe a * user-space rectangle that encloses the "inked" portion of the * glyphs, (as they would be drawn by cairo_show_glyphs()). * Additionally, the x_advance and y_advance values indicate the * amount by which the current point would be advanced by * cairo_show_glyphs(). * * Note that whitespace glyphs do not contribute to the size of the * rectangle (extents.width and extents.height). **/ void cairo_glyph_extents (cairo_t *cr, const cairo_glyph_t *glyphs, int num_glyphs, cairo_text_extents_t *extents) { cairo_status_t status; extents->x_bearing = 0.0; extents->y_bearing = 0.0; extents->width = 0.0; extents->height = 0.0; extents->x_advance = 0.0; extents->y_advance = 0.0; if (unlikely (cr->status)) return; if (num_glyphs == 0) return; if (unlikely (num_glyphs < 0)) { _cairo_set_error (cr, CAIRO_STATUS_NEGATIVE_COUNT); return; } if (unlikely (glyphs == NULL)) { _cairo_set_error (cr, CAIRO_STATUS_NULL_POINTER); return; } status = cr->backend->glyph_extents (cr, glyphs, num_glyphs, extents); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_show_text: * @cr: a cairo context * @utf8: a NUL-terminated string of text encoded in UTF-8, or %NULL * * A drawing operator that generates the shape from a string of UTF-8 * characters, rendered according to the current font_face, font_size * (font_matrix), and font_options. * * This function first computes a set of glyphs for the string of * text. The first glyph is placed so that its origin is at the * current point. The origin of each subsequent glyph is offset from * that of the previous glyph by the advance values of the previous * glyph. * * After this call the current point is moved to the origin of where * the next glyph would be placed in this same progression. That is, * the current point will be at the origin of the final glyph offset * by its advance values. This allows for easy display of a single * logical string with multiple calls to cairo_show_text(). * * Note: The cairo_show_text() function call is part of what the cairo * designers call the "toy" text API. It is convenient for short demos * and simple programs, but it is not expected to be adequate for * serious text-using applications. See cairo_show_glyphs() for the * "real" text display API in cairo. **/ void cairo_show_text (cairo_t *cr, const char *utf8) { cairo_text_extents_t extents; cairo_status_t status; cairo_glyph_t *glyphs, *last_glyph; cairo_text_cluster_t *clusters; int utf8_len, num_glyphs, num_clusters; cairo_text_cluster_flags_t cluster_flags; double x, y; cairo_bool_t has_show_text_glyphs; cairo_glyph_t stack_glyphs[CAIRO_STACK_ARRAY_LENGTH (cairo_glyph_t)]; cairo_text_cluster_t stack_clusters[CAIRO_STACK_ARRAY_LENGTH (cairo_text_cluster_t)]; cairo_scaled_font_t *scaled_font; cairo_glyph_text_info_t info; if (unlikely (cr->status)) return; if (utf8 == NULL) return; scaled_font = cairo_get_scaled_font (cr); if (unlikely (scaled_font->status)) { _cairo_set_error (cr, scaled_font->status); return; } utf8_len = strlen (utf8); has_show_text_glyphs = cairo_surface_has_show_text_glyphs (cairo_get_target (cr)); glyphs = stack_glyphs; num_glyphs = ARRAY_LENGTH (stack_glyphs); if (has_show_text_glyphs) { clusters = stack_clusters; num_clusters = ARRAY_LENGTH (stack_clusters); } else { clusters = NULL; num_clusters = 0; } cairo_get_current_point (cr, &x, &y); status = cairo_scaled_font_text_to_glyphs (scaled_font, x, y, utf8, utf8_len, &glyphs, &num_glyphs, has_show_text_glyphs ? &clusters : NULL, &num_clusters, &cluster_flags); if (unlikely (status)) goto BAIL; if (num_glyphs == 0) return; info.utf8 = utf8; info.utf8_len = utf8_len; info.clusters = clusters; info.num_clusters = num_clusters; info.cluster_flags = cluster_flags; status = cr->backend->glyphs (cr, glyphs, num_glyphs, &info); if (unlikely (status)) goto BAIL; last_glyph = &glyphs[num_glyphs - 1]; status = cr->backend->glyph_extents (cr, last_glyph, 1, &extents); if (unlikely (status)) goto BAIL; x = last_glyph->x + extents.x_advance; y = last_glyph->y + extents.y_advance; cr->backend->move_to (cr, x, y); BAIL: if (glyphs != stack_glyphs) cairo_glyph_free (glyphs); if (clusters != stack_clusters) cairo_text_cluster_free (clusters); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_show_glyphs: * @cr: a cairo context * @glyphs: array of glyphs to show * @num_glyphs: number of glyphs to show * * A drawing operator that generates the shape from an array of glyphs, * rendered according to the current font face, font size * (font matrix), and font options. **/ void cairo_show_glyphs (cairo_t *cr, const cairo_glyph_t *glyphs, int num_glyphs) { cairo_status_t status; if (unlikely (cr->status)) return; if (num_glyphs == 0) return; if (num_glyphs < 0) { _cairo_set_error (cr, CAIRO_STATUS_NEGATIVE_COUNT); return; } if (glyphs == NULL) { _cairo_set_error (cr, CAIRO_STATUS_NULL_POINTER); return; } status = cr->backend->glyphs (cr, glyphs, num_glyphs, NULL); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_show_text_glyphs: * @cr: a cairo context * @utf8: a string of text encoded in UTF-8 * @utf8_len: length of @utf8 in bytes, or -1 if it is NUL-terminated * @glyphs: array of glyphs to show * @num_glyphs: number of glyphs to show * @clusters: array of cluster mapping information * @num_clusters: number of clusters in the mapping * @cluster_flags: cluster mapping flags * * This operation has rendering effects similar to cairo_show_glyphs() * but, if the target surface supports it, uses the provided text and * cluster mapping to embed the text for the glyphs shown in the output. * If the target does not support the extended attributes, this function * acts like the basic cairo_show_glyphs() as if it had been passed * @glyphs and @num_glyphs. * * The mapping between @utf8 and @glyphs is provided by an array of * clusters. Each cluster covers a number of * text bytes and glyphs, and neighboring clusters cover neighboring * areas of @utf8 and @glyphs. The clusters should collectively cover @utf8 * and @glyphs in entirety. * * The first cluster always covers bytes from the beginning of @utf8. * If @cluster_flags do not have the %CAIRO_TEXT_CLUSTER_FLAG_BACKWARD * set, the first cluster also covers the beginning * of @glyphs, otherwise it covers the end of the @glyphs array and * following clusters move backward. * * See #cairo_text_cluster_t for constraints on valid clusters. * * Since: 1.8 **/ void cairo_show_text_glyphs (cairo_t *cr, const char *utf8, int utf8_len, const cairo_glyph_t *glyphs, int num_glyphs, const cairo_text_cluster_t *clusters, int num_clusters, cairo_text_cluster_flags_t cluster_flags) { cairo_status_t status; if (unlikely (cr->status)) return; /* A slew of sanity checks */ /* Special case for NULL and -1 */ if (utf8 == NULL && utf8_len == -1) utf8_len = 0; /* No NULLs for non-zeros */ if ((num_glyphs && glyphs == NULL) || (utf8_len && utf8 == NULL) || (num_clusters && clusters == NULL)) { _cairo_set_error (cr, CAIRO_STATUS_NULL_POINTER); return; } /* A -1 for utf8_len means NUL-terminated */ if (utf8_len == -1) utf8_len = strlen (utf8); /* Apart from that, no negatives */ if (num_glyphs < 0 || utf8_len < 0 || num_clusters < 0) { _cairo_set_error (cr, CAIRO_STATUS_NEGATIVE_COUNT); return; } if (num_glyphs == 0 && utf8_len == 0) return; if (utf8) { /* Make sure clusters cover the entire glyphs and utf8 arrays, * and that cluster boundaries are UTF-8 boundaries. */ status = _cairo_validate_text_clusters (utf8, utf8_len, glyphs, num_glyphs, clusters, num_clusters, cluster_flags); if (status == CAIRO_STATUS_INVALID_CLUSTERS) { /* Either got invalid UTF-8 text, or cluster mapping is bad. * Differentiate those. */ cairo_status_t status2; status2 = _cairo_utf8_to_ucs4 (utf8, utf8_len, NULL, NULL); if (status2) status = status2; } else { cairo_glyph_text_info_t info; info.utf8 = utf8; info.utf8_len = utf8_len; info.clusters = clusters; info.num_clusters = num_clusters; info.cluster_flags = cluster_flags; status = cr->backend->glyphs (cr, glyphs, num_glyphs, &info); } } else { status = cr->backend->glyphs (cr, glyphs, num_glyphs, NULL); } if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_text_path: * @cr: a cairo context * @utf8: a NUL-terminated string of text encoded in UTF-8, or %NULL * * Adds closed paths for text to the current path. The generated * path if filled, achieves an effect similar to that of * cairo_show_text(). * * Text conversion and positioning is done similar to cairo_show_text(). * * Like cairo_show_text(), After this call the current point is * moved to the origin of where the next glyph would be placed in * this same progression. That is, the current point will be at * the origin of the final glyph offset by its advance values. * This allows for chaining multiple calls to to cairo_text_path() * without having to set current point in between. * * Note: The cairo_text_path() function call is part of what the cairo * designers call the "toy" text API. It is convenient for short demos * and simple programs, but it is not expected to be adequate for * serious text-using applications. See cairo_glyph_path() for the * "real" text path API in cairo. **/ void cairo_text_path (cairo_t *cr, const char *utf8) { cairo_status_t status; cairo_text_extents_t extents; cairo_glyph_t stack_glyphs[CAIRO_STACK_ARRAY_LENGTH (cairo_glyph_t)]; cairo_glyph_t *glyphs, *last_glyph; cairo_scaled_font_t *scaled_font; int num_glyphs; double x, y; if (unlikely (cr->status)) return; if (utf8 == NULL) return; glyphs = stack_glyphs; num_glyphs = ARRAY_LENGTH (stack_glyphs); scaled_font = cairo_get_scaled_font (cr); if (unlikely (scaled_font->status)) { _cairo_set_error (cr, scaled_font->status); return; } cairo_get_current_point (cr, &x, &y); status = cairo_scaled_font_text_to_glyphs (scaled_font, x, y, utf8, -1, &glyphs, &num_glyphs, NULL, NULL, NULL); if (num_glyphs == 0) return; status = cr->backend->glyph_path (cr, glyphs, num_glyphs); if (unlikely (status)) goto BAIL; last_glyph = &glyphs[num_glyphs - 1]; status = cr->backend->glyph_extents (cr, last_glyph, 1, &extents); if (unlikely (status)) goto BAIL; x = last_glyph->x + extents.x_advance; y = last_glyph->y + extents.y_advance; cr->backend->move_to (cr, x, y); BAIL: if (glyphs != stack_glyphs) cairo_glyph_free (glyphs); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_glyph_path: * @cr: a cairo context * @glyphs: array of glyphs to show * @num_glyphs: number of glyphs to show * * Adds closed paths for the glyphs to the current path. The generated * path if filled, achieves an effect similar to that of * cairo_show_glyphs(). **/ void cairo_glyph_path (cairo_t *cr, const cairo_glyph_t *glyphs, int num_glyphs) { cairo_status_t status; if (unlikely (cr->status)) return; if (num_glyphs == 0) return; if (unlikely (num_glyphs < 0)) { _cairo_set_error (cr, CAIRO_STATUS_NEGATIVE_COUNT); return; } if (unlikely (glyphs == NULL)) { _cairo_set_error (cr, CAIRO_STATUS_NULL_POINTER); return; } status = cr->backend->glyph_path (cr, glyphs, num_glyphs); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_get_operator: * @cr: a cairo context * * Gets the current compositing operator for a cairo context. * * Return value: the current compositing operator. **/ cairo_operator_t cairo_get_operator (cairo_t *cr) { if (unlikely (cr->status)) return CAIRO_GSTATE_OPERATOR_DEFAULT; return cr->backend->get_operator (cr); } #if 0 /** * cairo_get_opacity: * @cr: a cairo context * * Gets the current compositing opacity for a cairo context. * * Return value: the current compositing opacity. **/ double cairo_get_opacity (cairo_t *cr) { if (unlikely (cr->status)) return 1.; return cr->backend->get_opacity (cr); } #endif /** * cairo_get_tolerance: * @cr: a cairo context * * Gets the current tolerance value, as set by cairo_set_tolerance(). * * Return value: the current tolerance value. **/ double cairo_get_tolerance (cairo_t *cr) { if (unlikely (cr->status)) return CAIRO_GSTATE_TOLERANCE_DEFAULT; return cr->backend->get_tolerance (cr); } slim_hidden_def (cairo_get_tolerance); /** * cairo_get_antialias: * @cr: a cairo context * * Gets the current shape antialiasing mode, as set by * cairo_set_antialias(). * * Return value: the current shape antialiasing mode. **/ cairo_antialias_t cairo_get_antialias (cairo_t *cr) { if (unlikely (cr->status)) return CAIRO_ANTIALIAS_DEFAULT; return cr->backend->get_antialias (cr); } /** * cairo_has_current_point: * @cr: a cairo context * * Returns whether a current point is defined on the current path. * See cairo_get_current_point() for details on the current point. * * Return value: whether a current point is defined. * * Since: 1.6 **/ cairo_bool_t cairo_has_current_point (cairo_t *cr) { if (unlikely (cr->status)) return FALSE; return cr->backend->has_current_point (cr); } /** * cairo_get_current_point: * @cr: a cairo context * @x: return value for X coordinate of the current point * @y: return value for Y coordinate of the current point * * Gets the current point of the current path, which is * conceptually the final point reached by the path so far. * * The current point is returned in the user-space coordinate * system. If there is no defined current point or if @cr is in an * error status, @x and @y will both be set to 0.0. It is possible to * check this in advance with cairo_has_current_point(). * * Most path construction functions alter the current point. See the * following for details on how they affect the current point: * cairo_new_path(), cairo_new_sub_path(), * cairo_append_path(), cairo_close_path(), * cairo_move_to(), cairo_line_to(), cairo_curve_to(), * cairo_rel_move_to(), cairo_rel_line_to(), cairo_rel_curve_to(), * cairo_arc(), cairo_arc_negative(), cairo_rectangle(), * cairo_text_path(), cairo_glyph_path(), cairo_stroke_to_path(). * * Some functions use and alter the current point but do not * otherwise change current path: * cairo_show_text(). * * Some functions unset the current path and as a result, current point: * cairo_fill(), cairo_stroke(). **/ void cairo_get_current_point (cairo_t *cr, double *x_ret, double *y_ret) { double x, y; x = y = 0; if (cr->status == CAIRO_STATUS_SUCCESS && cr->backend->has_current_point (cr)) { cr->backend->get_current_point (cr, &x, &y); } if (x_ret) *x_ret = x; if (y_ret) *y_ret = y; } slim_hidden_def(cairo_get_current_point); /** * cairo_get_fill_rule: * @cr: a cairo context * * Gets the current fill rule, as set by cairo_set_fill_rule(). * * Return value: the current fill rule. **/ cairo_fill_rule_t cairo_get_fill_rule (cairo_t *cr) { if (unlikely (cr->status)) return CAIRO_GSTATE_FILL_RULE_DEFAULT; return cr->backend->get_fill_rule (cr); } /** * cairo_get_line_width: * @cr: a cairo context * * This function returns the current line width value exactly as set by * cairo_set_line_width(). Note that the value is unchanged even if * the CTM has changed between the calls to cairo_set_line_width() and * cairo_get_line_width(). * * Return value: the current line width. **/ double cairo_get_line_width (cairo_t *cr) { if (unlikely (cr->status)) return CAIRO_GSTATE_LINE_WIDTH_DEFAULT; return cr->backend->get_line_width (cr); } slim_hidden_def (cairo_get_line_width); /** * cairo_get_line_cap: * @cr: a cairo context * * Gets the current line cap style, as set by cairo_set_line_cap(). * * Return value: the current line cap style. **/ cairo_line_cap_t cairo_get_line_cap (cairo_t *cr) { if (unlikely (cr->status)) return CAIRO_GSTATE_LINE_CAP_DEFAULT; return cr->backend->get_line_cap (cr); } /** * cairo_get_line_join: * @cr: a cairo context * * Gets the current line join style, as set by cairo_set_line_join(). * * Return value: the current line join style. **/ cairo_line_join_t cairo_get_line_join (cairo_t *cr) { if (unlikely (cr->status)) return CAIRO_GSTATE_LINE_JOIN_DEFAULT; return cr->backend->get_line_join (cr); } /** * cairo_get_miter_limit: * @cr: a cairo context * * Gets the current miter limit, as set by cairo_set_miter_limit(). * * Return value: the current miter limit. **/ double cairo_get_miter_limit (cairo_t *cr) { if (unlikely (cr->status)) return CAIRO_GSTATE_MITER_LIMIT_DEFAULT; return cr->backend->get_miter_limit (cr); } /** * cairo_get_matrix: * @cr: a cairo context * @matrix: return value for the matrix * * Stores the current transformation matrix (CTM) into @matrix. **/ void cairo_get_matrix (cairo_t *cr, cairo_matrix_t *matrix) { if (unlikely (cr->status)) { cairo_matrix_init_identity (matrix); return; } cr->backend->get_matrix (cr, matrix); } slim_hidden_def (cairo_get_matrix); /** * cairo_get_target: * @cr: a cairo context * * Gets the target surface for the cairo context as passed to * cairo_create(). * * This function will always return a valid pointer, but the result * can be a "nil" surface if @cr is already in an error state, * (ie. cairo_status() != %CAIRO_STATUS_SUCCESS). * A nil surface is indicated by cairo_surface_status() * != %CAIRO_STATUS_SUCCESS. * * Return value: the target surface. This object is owned by cairo. To * keep a reference to it, you must call cairo_surface_reference(). **/ cairo_surface_t * cairo_get_target (cairo_t *cr) { if (unlikely (cr->status)) return _cairo_surface_create_in_error (cr->status); return cr->backend->get_original_target (cr); } slim_hidden_def (cairo_get_target); /** * cairo_get_group_target: * @cr: a cairo context * * Gets the current destination surface for the context. This is either * the original target surface as passed to cairo_create() or the target * surface for the current group as started by the most recent call to * cairo_push_group() or cairo_push_group_with_content(). * * This function will always return a valid pointer, but the result * can be a "nil" surface if @cr is already in an error state, * (ie. cairo_status() != %CAIRO_STATUS_SUCCESS). * A nil surface is indicated by cairo_surface_status() * != %CAIRO_STATUS_SUCCESS. * * Return value: the target surface. This object is owned by cairo. To * keep a reference to it, you must call cairo_surface_reference(). * * Since: 1.2 **/ cairo_surface_t * cairo_get_group_target (cairo_t *cr) { if (unlikely (cr->status)) return _cairo_surface_create_in_error (cr->status); return cr->backend->get_current_target (cr); } /** * cairo_copy_path: * @cr: a cairo context * * Creates a copy of the current path and returns it to the user as a * #cairo_path_t. See #cairo_path_data_t for hints on how to iterate * over the returned data structure. * * This function will always return a valid pointer, but the result * will have no data (data==%NULL and * num_data==0), if either of the following * conditions hold: * * * If there is insufficient memory to copy the path. In this * case path->status will be set to * %CAIRO_STATUS_NO_MEMORY. * If @cr is already in an error state. In this case * path->status will contain the same status that * would be returned by cairo_status(). * * * Return value: the copy of the current path. The caller owns the * returned object and should call cairo_path_destroy() when finished * with it. **/ cairo_path_t * cairo_copy_path (cairo_t *cr) { if (unlikely (cr->status)) return _cairo_path_create_in_error (cr->status); return cr->backend->copy_path (cr); } /** * cairo_copy_path_flat: * @cr: a cairo context * * Gets a flattened copy of the current path and returns it to the * user as a #cairo_path_t. See #cairo_path_data_t for hints on * how to iterate over the returned data structure. * * This function is like cairo_copy_path() except that any curves * in the path will be approximated with piecewise-linear * approximations, (accurate to within the current tolerance * value). That is, the result is guaranteed to not have any elements * of type %CAIRO_PATH_CURVE_TO which will instead be replaced by a * series of %CAIRO_PATH_LINE_TO elements. * * This function will always return a valid pointer, but the result * will have no data (data==%NULL and * num_data==0), if either of the following * conditions hold: * * * If there is insufficient memory to copy the path. In this * case path->status will be set to * %CAIRO_STATUS_NO_MEMORY. * If @cr is already in an error state. In this case * path->status will contain the same status that * would be returned by cairo_status(). * * * Return value: the copy of the current path. The caller owns the * returned object and should call cairo_path_destroy() when finished * with it. **/ cairo_path_t * cairo_copy_path_flat (cairo_t *cr) { if (unlikely (cr->status)) return _cairo_path_create_in_error (cr->status); return cr->backend->copy_path_flat (cr); } /** * cairo_append_path: * @cr: a cairo context * @path: path to be appended * * Append the @path onto the current path. The @path may be either the * return value from one of cairo_copy_path() or * cairo_copy_path_flat() or it may be constructed manually. See * #cairo_path_t for details on how the path data structure should be * initialized, and note that path->status must be * initialized to %CAIRO_STATUS_SUCCESS. **/ void cairo_append_path (cairo_t *cr, const cairo_path_t *path) { cairo_status_t status; if (unlikely (cr->status)) return; if (unlikely (path == NULL)) { _cairo_set_error (cr, CAIRO_STATUS_NULL_POINTER); return; } if (unlikely (path->status)) { if (path->status > CAIRO_STATUS_SUCCESS && path->status <= CAIRO_STATUS_LAST_STATUS) _cairo_set_error (cr, path->status); else _cairo_set_error (cr, CAIRO_STATUS_INVALID_STATUS); return; } if (path->num_data == 0) return; if (unlikely (path->data == NULL)) { _cairo_set_error (cr, CAIRO_STATUS_NULL_POINTER); return; } status = cr->backend->append_path (cr, path); if (unlikely (status)) _cairo_set_error (cr, status); } /** * cairo_status: * @cr: a cairo context * * Checks whether an error has previously occurred for this context. * * Returns: the current status of this context, see #cairo_status_t **/ cairo_status_t cairo_status (cairo_t *cr) { return cr->status; } slim_hidden_def (cairo_status);