From 358934a60d2180dcd1ed20691dbb66d4fb977ab2 Mon Sep 17 00:00:00 2001 From: Sandeep Paulraj Date: Wed, 16 Dec 2009 22:02:18 +0000 Subject: spi: Add SPI master driver for DaVinci/DA8xx This patch adds support for a SPI master driver for the DaVinci series of SOCs Signed-off-by: Sandeep Paulraj Signed-off-by: Mark A. Greer Signed-off-by: Philby John Signed-off-by: Sudhakar Rajashekhara Signed-off-by: Kevin Hilman Signed-off-by: Grant Likely --- drivers/spi/Kconfig | 7 + drivers/spi/Makefile | 1 + drivers/spi/davinci_spi.c | 1255 +++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1263 insertions(+) create mode 100644 drivers/spi/davinci_spi.c (limited to 'drivers/spi') diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index f55eb0107336..82dabbca00c1 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -100,6 +100,13 @@ config SPI_BUTTERFLY inexpensive battery powered microcontroller evaluation board. This same cable can be used to flash new firmware. +config SPI_DAVINCI + tristate "SPI controller driver for DaVinci/DA8xx SoC's" + depends on SPI_MASTER && ARCH_DAVINCI + select SPI_BITBANG + help + SPI master controller for DaVinci and DA8xx SPI modules. + config SPI_GPIO tristate "GPIO-based bitbanging SPI Master" depends on GENERIC_GPIO diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index f3d2810ba11c..84b490fb7f8a 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o obj-$(CONFIG_SPI_AU1550) += au1550_spi.o obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o +obj-$(CONFIG_SPI_DAVINCI) += davinci_spi.o obj-$(CONFIG_SPI_DESIGNWARE) += dw_spi.o obj-$(CONFIG_SPI_DW_PCI) += dw_spi_pci.o obj-$(CONFIG_SPI_GPIO) += spi_gpio.o diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c new file mode 100644 index 000000000000..225ab60b02c4 --- /dev/null +++ b/drivers/spi/davinci_spi.c @@ -0,0 +1,1255 @@ +/* + * Copyright (C) 2009 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define SPI_NO_RESOURCE ((resource_size_t)-1) + +#define SPI_MAX_CHIPSELECT 2 + +#define CS_DEFAULT 0xFF + +#define SPI_BUFSIZ (SMP_CACHE_BYTES + 1) +#define DAVINCI_DMA_DATA_TYPE_S8 0x01 +#define DAVINCI_DMA_DATA_TYPE_S16 0x02 +#define DAVINCI_DMA_DATA_TYPE_S32 0x04 + +#define SPIFMT_PHASE_MASK BIT(16) +#define SPIFMT_POLARITY_MASK BIT(17) +#define SPIFMT_DISTIMER_MASK BIT(18) +#define SPIFMT_SHIFTDIR_MASK BIT(20) +#define SPIFMT_WAITENA_MASK BIT(21) +#define SPIFMT_PARITYENA_MASK BIT(22) +#define SPIFMT_ODD_PARITY_MASK BIT(23) +#define SPIFMT_WDELAY_MASK 0x3f000000u +#define SPIFMT_WDELAY_SHIFT 24 +#define SPIFMT_CHARLEN_MASK 0x0000001Fu + +/* SPIGCR1 */ +#define SPIGCR1_SPIENA_MASK 0x01000000u + +/* SPIPC0 */ +#define SPIPC0_DIFUN_MASK BIT(11) /* MISO */ +#define SPIPC0_DOFUN_MASK BIT(10) /* MOSI */ +#define SPIPC0_CLKFUN_MASK BIT(9) /* CLK */ +#define SPIPC0_SPIENA_MASK BIT(8) /* nREADY */ +#define SPIPC0_EN1FUN_MASK BIT(1) +#define SPIPC0_EN0FUN_MASK BIT(0) + +#define SPIINT_MASKALL 0x0101035F +#define SPI_INTLVL_1 0x000001FFu +#define SPI_INTLVL_0 0x00000000u + +/* SPIDAT1 */ +#define SPIDAT1_CSHOLD_SHIFT 28 +#define SPIDAT1_CSNR_SHIFT 16 +#define SPIGCR1_CLKMOD_MASK BIT(1) +#define SPIGCR1_MASTER_MASK BIT(0) +#define SPIGCR1_LOOPBACK_MASK BIT(16) + +/* SPIBUF */ +#define SPIBUF_TXFULL_MASK BIT(29) +#define SPIBUF_RXEMPTY_MASK BIT(31) + +/* Error Masks */ +#define SPIFLG_DLEN_ERR_MASK BIT(0) +#define SPIFLG_TIMEOUT_MASK BIT(1) +#define SPIFLG_PARERR_MASK BIT(2) +#define SPIFLG_DESYNC_MASK BIT(3) +#define SPIFLG_BITERR_MASK BIT(4) +#define SPIFLG_OVRRUN_MASK BIT(6) +#define SPIFLG_RX_INTR_MASK BIT(8) +#define SPIFLG_TX_INTR_MASK BIT(9) +#define SPIFLG_BUF_INIT_ACTIVE_MASK BIT(24) +#define SPIFLG_MASK (SPIFLG_DLEN_ERR_MASK \ + | SPIFLG_TIMEOUT_MASK | SPIFLG_PARERR_MASK \ + | SPIFLG_DESYNC_MASK | SPIFLG_BITERR_MASK \ + | SPIFLG_OVRRUN_MASK | SPIFLG_RX_INTR_MASK \ + | SPIFLG_TX_INTR_MASK \ + | SPIFLG_BUF_INIT_ACTIVE_MASK) + +#define SPIINT_DLEN_ERR_INTR BIT(0) +#define SPIINT_TIMEOUT_INTR BIT(1) +#define SPIINT_PARERR_INTR BIT(2) +#define SPIINT_DESYNC_INTR BIT(3) +#define SPIINT_BITERR_INTR BIT(4) +#define SPIINT_OVRRUN_INTR BIT(6) +#define SPIINT_RX_INTR BIT(8) +#define SPIINT_TX_INTR BIT(9) +#define SPIINT_DMA_REQ_EN BIT(16) +#define SPIINT_ENABLE_HIGHZ BIT(24) + +#define SPI_T2CDELAY_SHIFT 16 +#define SPI_C2TDELAY_SHIFT 24 + +/* SPI Controller registers */ +#define SPIGCR0 0x00 +#define SPIGCR1 0x04 +#define SPIINT 0x08 +#define SPILVL 0x0c +#define SPIFLG 0x10 +#define SPIPC0 0x14 +#define SPIPC1 0x18 +#define SPIPC2 0x1c +#define SPIPC3 0x20 +#define SPIPC4 0x24 +#define SPIPC5 0x28 +#define SPIPC6 0x2c +#define SPIPC7 0x30 +#define SPIPC8 0x34 +#define SPIDAT0 0x38 +#define SPIDAT1 0x3c +#define SPIBUF 0x40 +#define SPIEMU 0x44 +#define SPIDELAY 0x48 +#define SPIDEF 0x4c +#define SPIFMT0 0x50 +#define SPIFMT1 0x54 +#define SPIFMT2 0x58 +#define SPIFMT3 0x5c +#define TGINTVEC0 0x60 +#define TGINTVEC1 0x64 + +struct davinci_spi_slave { + u32 cmd_to_write; + u32 clk_ctrl_to_write; + u32 bytes_per_word; + u8 active_cs; +}; + +/* We have 2 DMA channels per CS, one for RX and one for TX */ +struct davinci_spi_dma { + int dma_tx_channel; + int dma_rx_channel; + int dma_tx_sync_dev; + int dma_rx_sync_dev; + enum dma_event_q eventq; + + struct completion dma_tx_completion; + struct completion dma_rx_completion; +}; + +/* SPI Controller driver's private data. */ +struct davinci_spi { + struct spi_bitbang bitbang; + struct clk *clk; + + u8 version; + resource_size_t pbase; + void __iomem *base; + size_t region_size; + u32 irq; + struct completion done; + + const void *tx; + void *rx; + u8 *tmp_buf; + int count; + struct davinci_spi_dma *dma_channels; + struct davinci_spi_platform_data *pdata; + + void (*get_rx)(u32 rx_data, struct davinci_spi *); + u32 (*get_tx)(struct davinci_spi *); + + struct davinci_spi_slave slave[SPI_MAX_CHIPSELECT]; +}; + +static unsigned use_dma; + +static void davinci_spi_rx_buf_u8(u32 data, struct davinci_spi *davinci_spi) +{ + u8 *rx = davinci_spi->rx; + + *rx++ = (u8)data; + davinci_spi->rx = rx; +} + +static void davinci_spi_rx_buf_u16(u32 data, struct davinci_spi *davinci_spi) +{ + u16 *rx = davinci_spi->rx; + + *rx++ = (u16)data; + davinci_spi->rx = rx; +} + +static u32 davinci_spi_tx_buf_u8(struct davinci_spi *davinci_spi) +{ + u32 data; + const u8 *tx = davinci_spi->tx; + + data = *tx++; + davinci_spi->tx = tx; + return data; +} + +static u32 davinci_spi_tx_buf_u16(struct davinci_spi *davinci_spi) +{ + u32 data; + const u16 *tx = davinci_spi->tx; + + data = *tx++; + davinci_spi->tx = tx; + return data; +} + +static inline void set_io_bits(void __iomem *addr, u32 bits) +{ + u32 v = ioread32(addr); + + v |= bits; + iowrite32(v, addr); +} + +static inline void clear_io_bits(void __iomem *addr, u32 bits) +{ + u32 v = ioread32(addr); + + v &= ~bits; + iowrite32(v, addr); +} + +static inline void set_fmt_bits(void __iomem *addr, u32 bits, int cs_num) +{ + set_io_bits(addr + SPIFMT0 + (0x4 * cs_num), bits); +} + +static inline void clear_fmt_bits(void __iomem *addr, u32 bits, int cs_num) +{ + clear_io_bits(addr + SPIFMT0 + (0x4 * cs_num), bits); +} + +static void davinci_spi_set_dma_req(const struct spi_device *spi, int enable) +{ + struct davinci_spi *davinci_spi = spi_master_get_devdata(spi->master); + + if (enable) + set_io_bits(davinci_spi->base + SPIINT, SPIINT_DMA_REQ_EN); + else + clear_io_bits(davinci_spi->base + SPIINT, SPIINT_DMA_REQ_EN); +} + +/* + * Interface to control the chip select signal + */ +static void davinci_spi_chipselect(struct spi_device *spi, int value) +{ + struct davinci_spi *davinci_spi; + struct davinci_spi_platform_data *pdata; + u32 data1_reg_val = 0; + + davinci_spi = spi_master_get_devdata(spi->master); + pdata = davinci_spi->pdata; + + /* + * Board specific chip select logic decides the polarity and cs + * line for the controller + */ + if (value == BITBANG_CS_INACTIVE) { + set_io_bits(davinci_spi->base + SPIDEF, CS_DEFAULT); + + data1_reg_val |= CS_DEFAULT << SPIDAT1_CSNR_SHIFT; + iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1); + + while ((ioread32(davinci_spi->base + SPIBUF) + & SPIBUF_RXEMPTY_MASK) == 0) + cpu_relax(); + } +} + +/** + * davinci_spi_setup_transfer - This functions will determine transfer method + * @spi: spi device on which data transfer to be done + * @t: spi transfer in which transfer info is filled + * + * This function determines data transfer method (8/16/32 bit transfer). + * It will also set the SPI Clock Control register according to + * SPI slave device freq. + */ +static int davinci_spi_setup_transfer(struct spi_device *spi, + struct spi_transfer *t) +{ + + struct davinci_spi *davinci_spi; + struct davinci_spi_platform_data *pdata; + u8 bits_per_word = 0; + u32 hz = 0, prescale; + + davinci_spi = spi_master_get_devdata(spi->master); + pdata = davinci_spi->pdata; + + if (t) { + bits_per_word = t->bits_per_word; + hz = t->speed_hz; + } + + /* if bits_per_word is not set then set it default */ + if (!bits_per_word) + bits_per_word = spi->bits_per_word; + + /* + * Assign function pointer to appropriate transfer method + * 8bit, 16bit or 32bit transfer + */ + if (bits_per_word <= 8 && bits_per_word >= 2) { + davinci_spi->get_rx = davinci_spi_rx_buf_u8; + davinci_spi->get_tx = davinci_spi_tx_buf_u8; + davinci_spi->slave[spi->chip_select].bytes_per_word = 1; + } else if (bits_per_word <= 16 && bits_per_word >= 2) { + davinci_spi->get_rx = davinci_spi_rx_buf_u16; + davinci_spi->get_tx = davinci_spi_tx_buf_u16; + davinci_spi->slave[spi->chip_select].bytes_per_word = 2; + } else + return -EINVAL; + + if (!hz) + hz = spi->max_speed_hz; + + clear_fmt_bits(davinci_spi->base, SPIFMT_CHARLEN_MASK, + spi->chip_select); + set_fmt_bits(davinci_spi->base, bits_per_word & 0x1f, + spi->chip_select); + + prescale = ((clk_get_rate(davinci_spi->clk) / hz) - 1) & 0xff; + + clear_fmt_bits(davinci_spi->base, 0x0000ff00, spi->chip_select); + set_fmt_bits(davinci_spi->base, prescale << 8, spi->chip_select); + + return 0; +} + +static void davinci_spi_dma_rx_callback(unsigned lch, u16 ch_status, void *data) +{ + struct spi_device *spi = (struct spi_device *)data; + struct davinci_spi *davinci_spi; + struct davinci_spi_dma *davinci_spi_dma; + struct davinci_spi_platform_data *pdata; + + davinci_spi = spi_master_get_devdata(spi->master); + davinci_spi_dma = &(davinci_spi->dma_channels[spi->chip_select]); + pdata = davinci_spi->pdata; + + if (ch_status == DMA_COMPLETE) + edma_stop(davinci_spi_dma->dma_rx_channel); + else + edma_clean_channel(davinci_spi_dma->dma_rx_channel); + + complete(&davinci_spi_dma->dma_rx_completion); + /* We must disable the DMA RX request */ + davinci_spi_set_dma_req(spi, 0); +} + +static void davinci_spi_dma_tx_callback(unsigned lch, u16 ch_status, void *data) +{ + struct spi_device *spi = (struct spi_device *)data; + struct davinci_spi *davinci_spi; + struct davinci_spi_dma *davinci_spi_dma; + struct davinci_spi_platform_data *pdata; + + davinci_spi = spi_master_get_devdata(spi->master); + davinci_spi_dma = &(davinci_spi->dma_channels[spi->chip_select]); + pdata = davinci_spi->pdata; + + if (ch_status == DMA_COMPLETE) + edma_stop(davinci_spi_dma->dma_tx_channel); + else + edma_clean_channel(davinci_spi_dma->dma_tx_channel); + + complete(&davinci_spi_dma->dma_tx_completion); + /* We must disable the DMA TX request */ + davinci_spi_set_dma_req(spi, 0); +} + +static int davinci_spi_request_dma(struct spi_device *spi) +{ + struct davinci_spi *davinci_spi; + struct davinci_spi_dma *davinci_spi_dma; + struct davinci_spi_platform_data *pdata; + struct device *sdev; + int r; + + davinci_spi = spi_master_get_devdata(spi->master); + davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select]; + pdata = davinci_spi->pdata; + sdev = davinci_spi->bitbang.master->dev.parent; + + r = edma_alloc_channel(davinci_spi_dma->dma_rx_sync_dev, + davinci_spi_dma_rx_callback, spi, + davinci_spi_dma->eventq); + if (r < 0) { + dev_dbg(sdev, "Unable to request DMA channel for SPI RX\n"); + return -EAGAIN; + } + davinci_spi_dma->dma_rx_channel = r; + r = edma_alloc_channel(davinci_spi_dma->dma_tx_sync_dev, + davinci_spi_dma_tx_callback, spi, + davinci_spi_dma->eventq); + if (r < 0) { + edma_free_channel(davinci_spi_dma->dma_rx_channel); + davinci_spi_dma->dma_rx_channel = -1; + dev_dbg(sdev, "Unable to request DMA channel for SPI TX\n"); + return -EAGAIN; + } + davinci_spi_dma->dma_tx_channel = r; + + return 0; +} + +/** + * davinci_spi_setup - This functions will set default transfer method + * @spi: spi device on which data transfer to be done + * + * This functions sets the default transfer method. + */ + +static int davinci_spi_setup(struct spi_device *spi) +{ + int retval; + struct davinci_spi *davinci_spi; + struct davinci_spi_dma *davinci_spi_dma; + struct device *sdev; + + davinci_spi = spi_master_get_devdata(spi->master); + sdev = davinci_spi->bitbang.master->dev.parent; + + /* if bits per word length is zero then set it default 8 */ + if (!spi->bits_per_word) + spi->bits_per_word = 8; + + davinci_spi->slave[spi->chip_select].cmd_to_write = 0; + + if (use_dma && davinci_spi->dma_channels) { + davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select]; + + if ((davinci_spi_dma->dma_rx_channel == -1) + || (davinci_spi_dma->dma_tx_channel == -1)) { + retval = davinci_spi_request_dma(spi); + if (retval < 0) + return retval; + } + } + + /* + * SPI in DaVinci and DA8xx operate between + * 600 KHz and 50 MHz + */ + if (spi->max_speed_hz < 600000 || spi->max_speed_hz > 50000000) { + dev_dbg(sdev, "Operating frequency is not in acceptable " + "range\n"); + return -EINVAL; + } + + /* + * Set up SPIFMTn register, unique to this chipselect. + * + * NOTE: we could do all of these with one write. Also, some + * of the "version 2" features are found in chips that don't + * support all of them... + */ + if (spi->mode & SPI_LSB_FIRST) + set_fmt_bits(davinci_spi->base, SPIFMT_SHIFTDIR_MASK, + spi->chip_select); + else + clear_fmt_bits(davinci_spi->base, SPIFMT_SHIFTDIR_MASK, + spi->chip_select); + + if (spi->mode & SPI_CPOL) + set_fmt_bits(davinci_spi->base, SPIFMT_POLARITY_MASK, + spi->chip_select); + else + clear_fmt_bits(davinci_spi->base, SPIFMT_POLARITY_MASK, + spi->chip_select); + + if (!(spi->mode & SPI_CPHA)) + set_fmt_bits(davinci_spi->base, SPIFMT_PHASE_MASK, + spi->chip_select); + else + clear_fmt_bits(davinci_spi->base, SPIFMT_PHASE_MASK, + spi->chip_select); + + /* + * Version 1 hardware supports two basic SPI modes: + * - Standard SPI mode uses 4 pins, with chipselect + * - 3 pin SPI is a 4 pin variant without CS (SPI_NO_CS) + * (distinct from SPI_3WIRE, with just one data wire; + * or similar variants without MOSI or without MISO) + * + * Version 2 hardware supports an optional handshaking signal, + * so it can support two more modes: + * - 5 pin SPI variant is standard SPI plus SPI_READY + * - 4 pin with enable is (SPI_READY | SPI_NO_CS) + */ + + if (davinci_spi->version == SPI_VERSION_2) { + clear_fmt_bits(davinci_spi->base, SPIFMT_WDELAY_MASK, + spi->chip_select); + set_fmt_bits(davinci_spi->base, + (davinci_spi->pdata->wdelay + << SPIFMT_WDELAY_SHIFT) + & SPIFMT_WDELAY_MASK, + spi->chip_select); + + if (davinci_spi->pdata->odd_parity) + set_fmt_bits(davinci_spi->base, + SPIFMT_ODD_PARITY_MASK, + spi->chip_select); + else + clear_fmt_bits(davinci_spi->base, + SPIFMT_ODD_PARITY_MASK, + spi->chip_select); + + if (davinci_spi->pdata->parity_enable) + set_fmt_bits(davinci_spi->base, + SPIFMT_PARITYENA_MASK, + spi->chip_select); + else + clear_fmt_bits(davinci_spi->base, + SPIFMT_PARITYENA_MASK, + spi->chip_select); + + if (davinci_spi->pdata->wait_enable) + set_fmt_bits(davinci_spi->base, + SPIFMT_WAITENA_MASK, + spi->chip_select); + else + clear_fmt_bits(davinci_spi->base, + SPIFMT_WAITENA_MASK, + spi->chip_select); + + if (davinci_spi->pdata->timer_disable) + set_fmt_bits(davinci_spi->base, + SPIFMT_DISTIMER_MASK, + spi->chip_select); + else + clear_fmt_bits(davinci_spi->base, + SPIFMT_DISTIMER_MASK, + spi->chip_select); + } + + retval = davinci_spi_setup_transfer(spi, NULL); + + return retval; +} + +static void davinci_spi_cleanup(struct spi_device *spi) +{ + struct davinci_spi *davinci_spi = spi_master_get_devdata(spi->master); + struct davinci_spi_dma *davinci_spi_dma; + + davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select]; + + if (use_dma && davinci_spi->dma_channels) { + davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select]; + + if ((davinci_spi_dma->dma_rx_channel != -1) + && (davinci_spi_dma->dma_tx_channel != -1)) { + edma_free_channel(davinci_spi_dma->dma_tx_channel); + edma_free_channel(davinci_spi_dma->dma_rx_channel); + } + } +} + +static int davinci_spi_bufs_prep(struct spi_device *spi, + struct davinci_spi *davinci_spi) +{ + int op_mode = 0; + + /* + * REVISIT unless devices disagree about SPI_LOOP or + * SPI_READY (SPI_NO_CS only allows one device!), this + * should not need to be done before each message... + * optimize for both flags staying cleared. + */ + + op_mode = SPIPC0_DIFUN_MASK + | SPIPC0_DOFUN_MASK + | SPIPC0_CLKFUN_MASK; + if (!(spi->mode & SPI_NO_CS)) + op_mode |= 1 << spi->chip_select; + if (spi->mode & SPI_READY) + op_mode |= SPIPC0_SPIENA_MASK; + + iowrite32(op_mode, davinci_spi->base + SPIPC0); + + if (spi->mode & SPI_LOOP) + set_io_bits(davinci_spi->base + SPIGCR1, + SPIGCR1_LOOPBACK_MASK); + else + clear_io_bits(davinci_spi->base + SPIGCR1, + SPIGCR1_LOOPBACK_MASK); + + return 0; +} + +static int davinci_spi_check_error(struct davinci_spi *davinci_spi, + int int_status) +{ + struct device *sdev = davinci_spi->bitbang.master->dev.parent; + + if (int_status & SPIFLG_TIMEOUT_MASK) { + dev_dbg(sdev, "SPI Time-out Error\n"); + return -ETIMEDOUT; + } + if (int_status & SPIFLG_DESYNC_MASK) { + dev_dbg(sdev, "SPI Desynchronization Error\n"); + return -EIO; + } + if (int_status & SPIFLG_BITERR_MASK) { + dev_dbg(sdev, "SPI Bit error\n"); + return -EIO; + } + + if (davinci_spi->version == SPI_VERSION_2) { + if (int_status & SPIFLG_DLEN_ERR_MASK) { + dev_dbg(sdev, "SPI Data Length Error\n"); + return -EIO; + } + if (int_status & SPIFLG_PARERR_MASK) { + dev_dbg(sdev, "SPI Parity Error\n"); + return -EIO; + } + if (int_status & SPIFLG_OVRRUN_MASK) { + dev_dbg(sdev, "SPI Data Overrun error\n"); + return -EIO; + } + if (int_status & SPIFLG_TX_INTR_MASK) { + dev_dbg(sdev, "SPI TX intr bit set\n"); + return -EIO; + } + if (int_status & SPIFLG_BUF_INIT_ACTIVE_MASK) { + dev_dbg(sdev, "SPI Buffer Init Active\n"); + return -EBUSY; + } + } + + return 0; +} + +/** + * davinci_spi_bufs - functions which will handle transfer data + * @spi: spi device on which data transfer to be done + * @t: spi transfer in which transfer info is filled + * + * This function will put data to be transferred into data register + * of SPI controller and then wait until the completion will be marked + * by the IRQ Handler. + */ +static int davinci_spi_bufs_pio(struct spi_device *spi, struct spi_transfer *t) +{ + struct davinci_spi *davinci_spi; + int int_status, count, ret; + u8 conv, tmp; + u32 tx_data, data1_reg_val; + u32 buf_val, flg_val; + struct davinci_spi_platform_data *pdata; + + davinci_spi = spi_master_get_devdata(spi->master); + pdata = davinci_spi->pdata; + + davinci_spi->tx = t->tx_buf; + davinci_spi->rx = t->rx_buf; + + /* convert len to words based on bits_per_word */ + conv = davinci_spi->slave[spi->chip_select].bytes_per_word; + davinci_spi->count = t->len / conv; + + INIT_COMPLETION(davinci_spi->done); + + ret = davinci_spi_bufs_prep(spi, davinci_spi); + if (ret) + return ret; + + /* Enable SPI */ + set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_SPIENA_MASK); + + iowrite32(0 | (pdata->c2tdelay << SPI_C2TDELAY_SHIFT) | + (pdata->t2cdelay << SPI_T2CDELAY_SHIFT), + davinci_spi->base + SPIDELAY); + + count = davinci_spi->count; + data1_reg_val = pdata->cs_hold << SPIDAT1_CSHOLD_SHIFT; + tmp = ~(0x1 << spi->chip_select); + + clear_io_bits(davinci_spi->base + SPIDEF, ~tmp); + + data1_reg_val |= tmp << SPIDAT1_CSNR_SHIFT; + + while ((ioread32(davinci_spi->base + SPIBUF) + & SPIBUF_RXEMPTY_MASK) == 0) + cpu_relax(); + + /* Determine the command to execute READ or WRITE */ + if (t->tx_buf) { + clear_io_bits(davinci_spi->base + SPIINT, SPIINT_MASKALL); + + while (1) { + tx_data = davinci_spi->get_tx(davinci_spi); + + data1_reg_val &= ~(0xFFFF); + data1_reg_val |= (0xFFFF & tx_data); + + buf_val = ioread32(davinci_spi->base + SPIBUF); + if ((buf_val & SPIBUF_TXFULL_MASK) == 0) { + iowrite32(data1_reg_val, + davinci_spi->base + SPIDAT1); + + count--; + } + while (ioread32(davinci_spi->base + SPIBUF) + & SPIBUF_RXEMPTY_MASK) + cpu_relax(); + + /* getting the returned byte */ + if (t->rx_buf) { + buf_val = ioread32(davinci_spi->base + SPIBUF); + davinci_spi->get_rx(buf_val, davinci_spi); + } + if (count <= 0) + break; + } + } else { + if (pdata->poll_mode) { + while (1) { + /* keeps the serial clock going */ + if ((ioread32(davinci_spi->base + SPIBUF) + & SPIBUF_TXFULL_MASK) == 0) + iowrite32(data1_reg_val, + davinci_spi->base + SPIDAT1); + + while (ioread32(davinci_spi->base + SPIBUF) & + SPIBUF_RXEMPTY_MASK) + cpu_relax(); + + flg_val = ioread32(davinci_spi->base + SPIFLG); + buf_val = ioread32(davinci_spi->base + SPIBUF); + + davinci_spi->get_rx(buf_val, davinci_spi); + + count--; + if (count <= 0) + break; + } + } else { /* Receive in Interrupt mode */ + int i; + + for (i = 0; i < davinci_spi->count; i++) { + set_io_bits(davinci_spi->base + SPIINT, + SPIINT_BITERR_INTR + | SPIINT_OVRRUN_INTR + | SPIINT_RX_INTR); + + iowrite32(data1_reg_val, + davinci_spi->base + SPIDAT1); + + while (ioread32(davinci_spi->base + SPIINT) & + SPIINT_RX_INTR) + cpu_relax(); + } + iowrite32((data1_reg_val & 0x0ffcffff), + davinci_spi->base + SPIDAT1); + } + } + + /* + * Check for bit error, desync error,parity error,timeout error and + * receive overflow errors + */ + int_status = ioread32(davinci_spi->base + SPIFLG); + + ret = davinci_spi_check_error(davinci_spi, int_status); + if (ret != 0) + return ret; + + /* SPI Framework maintains the count only in bytes so convert back */ + davinci_spi->count *= conv; + + return t->len; +} + +#define DAVINCI_DMA_DATA_TYPE_S8 0x01 +#define DAVINCI_DMA_DATA_TYPE_S16 0x02 +#define DAVINCI_DMA_DATA_TYPE_S32 0x04 + +static int davinci_spi_bufs_dma(struct spi_device *spi, struct spi_transfer *t) +{ + struct davinci_spi *davinci_spi; + int int_status = 0; + int count, temp_count; + u8 conv = 1; + u8 tmp; + u32 data1_reg_val; + struct davinci_spi_dma *davinci_spi_dma; + int word_len, data_type, ret; + unsigned long tx_reg, rx_reg; + struct davinci_spi_platform_data *pdata; + struct device *sdev; + + davinci_spi = spi_master_get_devdata(spi->master); + pdata = davinci_spi->pdata; + sdev = davinci_spi->bitbang.master->dev.parent; + + davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select]; + + tx_reg = (unsigned long)davinci_spi->pbase + SPIDAT1; + rx_reg = (unsigned long)davinci_spi->pbase + SPIBUF; + + davinci_spi->tx = t->tx_buf; + davinci_spi->rx = t->rx_buf; + + /* convert len to words based on bits_per_word */ + conv = davinci_spi->slave[spi->chip_select].bytes_per_word; + davinci_spi->count = t->len / conv; + + INIT_COMPLETION(davinci_spi->done); + + init_completion(&davinci_spi_dma->dma_rx_completion); + init_completion(&davinci_spi_dma->dma_tx_completion); + + word_len = conv * 8; + + if (word_len <= 8) + data_type = DAVINCI_DMA_DATA_TYPE_S8; + else if (word_len <= 16) + data_type = DAVINCI_DMA_DATA_TYPE_S16; + else if (word_len <= 32) + data_type = DAVINCI_DMA_DATA_TYPE_S32; + else + return -EINVAL; + + ret = davinci_spi_bufs_prep(spi, davinci_spi); + if (ret) + return ret; + + /* Put delay val if required */ + iowrite32(0 | (pdata->c2tdelay << SPI_C2TDELAY_SHIFT) | + (pdata->t2cdelay << SPI_T2CDELAY_SHIFT), + davinci_spi->base + SPIDELAY); + + count = davinci_spi->count; /* the number of elements */ + data1_reg_val = pdata->cs_hold << SPIDAT1_CSHOLD_SHIFT; + + /* CS default = 0xFF */ + tmp = ~(0x1 << spi->chip_select); + + clear_io_bits(davinci_spi->base + SPIDEF, ~tmp); + + data1_reg_val |= tmp << SPIDAT1_CSNR_SHIFT; + + /* disable all interrupts for dma transfers */ + clear_io_bits(davinci_spi->base + SPIINT, SPIINT_MASKALL); + /* Disable SPI to write configuration bits in SPIDAT */ + clear_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_SPIENA_MASK); + iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1); + /* Enable SPI */ + set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_SPIENA_MASK); + + while ((ioread32(davinci_spi->base + SPIBUF) + & SPIBUF_RXEMPTY_MASK) == 0) + cpu_relax(); + + + if (t->tx_buf) { + t->tx_dma = dma_map_single(&spi->dev, (void *)t->tx_buf, count, + DMA_TO_DEVICE); + if (dma_mapping_error(&spi->dev, t->tx_dma)) { + dev_dbg(sdev, "Unable to DMA map a %d bytes" + " TX buffer\n", count); + return -ENOMEM; + } + temp_count = count; + } else { + /* We need TX clocking for RX transaction */ + t->tx_dma = dma_map_single(&spi->dev, + (void *)davinci_spi->tmp_buf, count + 1, + DMA_TO_DEVICE); + if (dma_mapping_error(&spi->dev, t->tx_dma)) { + dev_dbg(sdev, "Unable to DMA map a %d bytes" + " TX tmp buffer\n", count); + return -ENOMEM; + } + temp_count = count + 1; + } + + edma_set_transfer_params(davinci_spi_dma->dma_tx_channel, + data_type, temp_count, 1, 0, ASYNC); + edma_set_dest(davinci_spi_dma->dma_tx_channel, tx_reg, INCR, W8BIT); + edma_set_src(davinci_spi_dma->dma_tx_channel, t->tx_dma, INCR, W8BIT); + edma_set_src_index(davinci_spi_dma->dma_tx_channel, data_type, 0); + edma_set_dest_index(davinci_spi_dma->dma_tx_channel, 0, 0); + + if (t->rx_buf) { + /* initiate transaction */ + iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1); + + t->rx_dma = dma_map_single(&spi->dev, (void *)t->rx_buf, count, + DMA_FROM_DEVICE); + if (dma_mapping_error(&spi->dev, t->rx_dma)) { + dev_dbg(sdev, "Couldn't DMA map a %d bytes RX buffer\n", + count); + if (t->tx_buf != NULL) + dma_unmap_single(NULL, t->tx_dma, + count, DMA_TO_DEVICE); + return -ENOMEM; + } + edma_set_transfer_params(davinci_spi_dma->dma_rx_channel, + data_type, count, 1, 0, ASYNC); + edma_set_src(davinci_spi_dma->dma_rx_channel, + rx_reg, INCR, W8BIT); + edma_set_dest(davinci_spi_dma->dma_rx_channel, + t->rx_dma, INCR, W8BIT); + edma_set_src_index(davinci_spi_dma->dma_rx_channel, 0, 0); + edma_set_dest_index(davinci_spi_dma->dma_rx_channel, + data_type, 0); + } + + if ((t->tx_buf) || (t->rx_buf)) + edma_start(davinci_spi_dma->dma_tx_channel); + + if (t->rx_buf) + edma_start(davinci_spi_dma->dma_rx_channel); + + if ((t->rx_buf) || (t->tx_buf)) + davinci_spi_set_dma_req(spi, 1); + + if (t->tx_buf) + wait_for_completion_interruptible( + &davinci_spi_dma->dma_tx_completion); + + if (t->rx_buf) + wait_for_completion_interruptible( + &davinci_spi_dma->dma_rx_completion); + + dma_unmap_single(NULL, t->tx_dma, temp_count, DMA_TO_DEVICE); + + if (t->rx_buf) + dma_unmap_single(NULL, t->rx_dma, count, DMA_FROM_DEVICE); + + /* + * Check for bit error, desync error,parity error,timeout error and + * receive overflow errors + */ + int_status = ioread32(davinci_spi->base + SPIFLG); + + ret = davinci_spi_check_error(davinci_spi, int_status); + if (ret != 0) + return ret; + + /* SPI Framework maintains the count only in bytes so convert back */ + davinci_spi->count *= conv; + + return t->len; +} + +/** + * davinci_spi_irq - IRQ handler for DaVinci SPI + * @irq: IRQ number for this SPI Master + * @context_data: structure for SPI Master controller davinci_spi + */ +static irqreturn_t davinci_spi_irq(s32 irq, void *context_data) +{ + struct davinci_spi *davinci_spi = context_data; + u32 int_status, rx_data = 0; + irqreturn_t ret = IRQ_NONE; + + int_status = ioread32(davinci_spi->base + SPIFLG); + + while ((int_status & SPIFLG_RX_INTR_MASK)) { + if (likely(int_status & SPIFLG_RX_INTR_MASK)) { + ret = IRQ_HANDLED; + + rx_data = ioread32(davinci_spi->base + SPIBUF); + davinci_spi->get_rx(rx_data, davinci_spi); + + /* Disable Receive Interrupt */ + iowrite32(~(SPIINT_RX_INTR | SPIINT_TX_INTR), + davinci_spi->base + SPIINT); + } else + (void)davinci_spi_check_error(davinci_spi, int_status); + + int_status = ioread32(davinci_spi->base + SPIFLG); + } + + return ret; +} + +/** + * davinci_spi_probe - probe function for SPI Master Controller + * @pdev: platform_device structure which contains plateform specific data + */ +static int davinci_spi_probe(struct platform_device *pdev) +{ + struct spi_master *master; + struct davinci_spi *davinci_spi; + struct davinci_spi_platform_data *pdata; + struct resource *r, *mem; + resource_size_t dma_rx_chan = SPI_NO_RESOURCE; + resource_size_t dma_tx_chan = SPI_NO_RESOURCE; + resource_size_t dma_eventq = SPI_NO_RESOURCE; + int i = 0, ret = 0; + + pdata = pdev->dev.platform_data; + if (pdata == NULL) { + ret = -ENODEV; + goto err; + } + + master = spi_alloc_master(&pdev->dev, sizeof(struct davinci_spi)); + if (master == NULL) { + ret = -ENOMEM; + goto err; + } + + dev_set_drvdata(&pdev->dev, master); + + davinci_spi = spi_master_get_devdata(master); + if (davinci_spi == NULL) { + ret = -ENOENT; + goto free_master; + } + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (r == NULL) { + ret = -ENOENT; + goto free_master; + } + + davinci_spi->pbase = r->start; + davinci_spi->region_size = resource_size(r); + davinci_spi->pdata = pdata; + + mem = request_mem_region(r->start, davinci_spi->region_size, + pdev->name); + if (mem == NULL) { + ret = -EBUSY; + goto free_master; + } + + davinci_spi->base = (struct davinci_spi_reg __iomem *) + ioremap(r->start, davinci_spi->region_size); + if (davinci_spi->base == NULL) { + ret = -ENOMEM; + goto release_region; + } + + davinci_spi->irq = platform_get_irq(pdev, 0); + if (davinci_spi->irq <= 0) { + ret = -EINVAL; + goto unmap_io; + } + + ret = request_irq(davinci_spi->irq, davinci_spi_irq, IRQF_DISABLED, + dev_name(&pdev->dev), davinci_spi); + if (ret) + goto unmap_io; + + /* Allocate tmp_buf for tx_buf */ + davinci_spi->tmp_buf = kzalloc(SPI_BUFSIZ, GFP_KERNEL); + if (davinci_spi->tmp_buf == NULL) { + ret = -ENOMEM; + goto irq_free; + } + + davinci_spi->bitbang.master = spi_master_get(master); + if (davinci_spi->bitbang.master == NULL) { + ret = -ENODEV; + goto free_tmp_buf; + } + + davinci_spi->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(davinci_spi->clk)) { + ret = -ENODEV; + goto put_master; + } + clk_enable(davinci_spi->clk); + + + master->bus_num = pdev->id; + master->num_chipselect = pdata->num_chipselect; + master->setup = davinci_spi_setup; + master->cleanup = davinci_spi_cleanup; + + davinci_spi->bitbang.chipselect = davinci_spi_chipselect; + davinci_spi->bitbang.setup_transfer = davinci_spi_setup_transfer; + + davinci_spi->version = pdata->version; + use_dma = pdata->use_dma; + + davinci_spi->bitbang.flags = SPI_NO_CS | SPI_LSB_FIRST | SPI_LOOP; + if (davinci_spi->version == SPI_VERSION_2) + davinci_spi->bitbang.flags |= SPI_READY; + + if (use_dma) { + r = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (r) + dma_rx_chan = r->start; + r = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (r) + dma_tx_chan = r->start; + r = platform_get_resource(pdev, IORESOURCE_DMA, 2); + if (r) + dma_eventq = r->start; + } + + if (!use_dma || + dma_rx_chan == SPI_NO_RESOURCE || + dma_tx_chan == SPI_NO_RESOURCE || + dma_eventq == SPI_NO_RESOURCE) { + davinci_spi->bitbang.txrx_bufs = davinci_spi_bufs_pio; + use_dma = 0; + } else { + davinci_spi->bitbang.txrx_bufs = davinci_spi_bufs_dma; + davinci_spi->dma_channels = kzalloc(master->num_chipselect + * sizeof(struct davinci_spi_dma), GFP_KERNEL); + if (davinci_spi->dma_channels == NULL) { + ret = -ENOMEM; + goto free_clk; + } + + for (i = 0; i < master->num_chipselect; i++) { + davinci_spi->dma_channels[i].dma_rx_channel = -1; + davinci_spi->dma_channels[i].dma_rx_sync_dev = + dma_rx_chan; + davinci_spi->dma_channels[i].dma_tx_channel = -1; + davinci_spi->dma_channels[i].dma_tx_sync_dev = + dma_tx_chan; + davinci_spi->dma_channels[i].eventq = dma_eventq; + } + dev_info(&pdev->dev, "DaVinci SPI driver in EDMA mode\n" + "Using RX channel = %d , TX channel = %d and " + "event queue = %d", dma_rx_chan, dma_tx_chan, + dma_eventq); + } + + davinci_spi->get_rx = davinci_spi_rx_buf_u8; + davinci_spi->get_tx = davinci_spi_tx_buf_u8; + + init_completion(&davinci_spi->done); + + /* Reset In/OUT SPI module */ + iowrite32(0, davinci_spi->base + SPIGCR0); + udelay(100); + iowrite32(1, davinci_spi->base + SPIGCR0); + + /* Clock internal */ + if (davinci_spi->pdata->clk_internal) + set_io_bits(davinci_spi->base + SPIGCR1, + SPIGCR1_CLKMOD_MASK); + else + clear_io_bits(davinci_spi->base + SPIGCR1, + SPIGCR1_CLKMOD_MASK); + + /* master mode default */ + set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_MASTER_MASK); + + if (davinci_spi->pdata->intr_level) + iowrite32(SPI_INTLVL_1, davinci_spi->base + SPILVL); + else + iowrite32(SPI_INTLVL_0, davinci_spi->base + SPILVL); + + ret = spi_bitbang_start(&davinci_spi->bitbang); + if (ret) + goto free_clk; + + dev_info(&pdev->dev, "Controller at 0x%p \n", davinci_spi->base); + + if (!pdata->poll_mode) + dev_info(&pdev->dev, "Operating in interrupt mode" + " using IRQ %d\n", davinci_spi->irq); + + return ret; + +free_clk: + clk_disable(davinci_spi->clk); + clk_put(davinci_spi->clk); +put_master: + spi_master_put(master); +free_tmp_buf: + kfree(davinci_spi->tmp_buf); +irq_free: + free_irq(davinci_spi->irq, davinci_spi); +unmap_io: + iounmap(davinci_spi->base); +release_region: + release_mem_region(davinci_spi->pbase, davinci_spi->region_size); +free_master: + kfree(master); +err: + return ret; +} + +/** + * davinci_spi_remove - remove function for SPI Master Controller + * @pdev: platform_device structure which contains plateform specific data + * + * This function will do the reverse action of davinci_spi_probe function + * It will free the IRQ and SPI controller's memory region. + * It will also call spi_bitbang_stop to destroy the work queue which was + * created by spi_bitbang_start. + */ +static int __exit davinci_spi_remove(struct platform_device *pdev) +{ + struct davinci_spi *davinci_spi; + struct spi_master *master; + + master = dev_get_drvdata(&pdev->dev); + davinci_spi = spi_master_get_devdata(master); + + spi_bitbang_stop(&davinci_spi->bitbang); + + clk_disable(davinci_spi->clk); + clk_put(davinci_spi->clk); + spi_master_put(master); + kfree(davinci_spi->tmp_buf); + free_irq(davinci_spi->irq, davinci_spi); + iounmap(davinci_spi->base); + release_mem_region(davinci_spi->pbase, davinci_spi->region_size); + + return 0; +} + +static struct platform_driver davinci_spi_driver = { + .driver.name = "spi_davinci", + .remove = __exit_p(davinci_spi_remove), +}; + +static int __init davinci_spi_init(void) +{ + return platform_driver_probe(&davinci_spi_driver, davinci_spi_probe); +} +module_init(davinci_spi_init); + +static void __exit davinci_spi_exit(void) +{ + platform_driver_unregister(&davinci_spi_driver); +} +module_exit(davinci_spi_exit); + +MODULE_DESCRIPTION("TI DaVinci SPI Master Controller Driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 68ea2d82c3671d2eccb600e6871fcbec1cac7fca Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Wed, 20 Jan 2010 13:49:44 -0700 Subject: spi: Fix reversed args to time_before() in Freescale stmp driver. Signed-off-by: Robert P. J. Day Signed-off-by: Grant Likely --- drivers/spi/spi_stmp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi_stmp.c b/drivers/spi/spi_stmp.c index 2552bb364005..fadff76eb7e0 100644 --- a/drivers/spi/spi_stmp.c +++ b/drivers/spi/spi_stmp.c @@ -76,7 +76,7 @@ struct stmp_spi { break; \ } \ cpu_relax(); \ - } while (time_before(end_jiffies, jiffies)); \ + } while (time_before(jiffies, end_jiffies)); \ succeeded; \ }) -- cgit v1.2.3 From 631e61b7ca12ef14c834f99f8948e410c539f585 Mon Sep 17 00:00:00 2001 From: Márton Németh Date: Wed, 20 Jan 2010 13:49:44 -0700 Subject: spi: make Open Firmware device id constant MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The match_table field of the struct of_device_id is constant in so it is worth to make the initialization data constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // Signed-off-by: Márton Németh Cc: Julia Lawall Cc: cocci@diku.dk Signed-off-by: Grant Likely --- drivers/spi/mpc52xx_psc_spi.c | 2 +- drivers/spi/mpc52xx_spi.c | 2 +- drivers/spi/spi_ppc4xx.c | 2 +- drivers/spi/xilinx_spi_of.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c index f50c81df336a..04747868d6c4 100644 --- a/drivers/spi/mpc52xx_psc_spi.c +++ b/drivers/spi/mpc52xx_psc_spi.c @@ -503,7 +503,7 @@ static int __exit mpc52xx_psc_spi_of_remove(struct of_device *op) return mpc52xx_psc_spi_do_remove(&op->dev); } -static struct of_device_id mpc52xx_psc_spi_of_match[] = { +static const struct of_device_id mpc52xx_psc_spi_of_match[] = { { .compatible = "fsl,mpc5200-psc-spi", }, { .compatible = "mpc5200-psc-spi", }, /* old */ {} diff --git a/drivers/spi/mpc52xx_spi.c b/drivers/spi/mpc52xx_spi.c index 45bfe6458173..6eab46537a0a 100644 --- a/drivers/spi/mpc52xx_spi.c +++ b/drivers/spi/mpc52xx_spi.c @@ -550,7 +550,7 @@ static int __devexit mpc52xx_spi_remove(struct of_device *op) return 0; } -static struct of_device_id mpc52xx_spi_match[] __devinitdata = { +static const struct of_device_id mpc52xx_spi_match[] __devinitconst = { { .compatible = "fsl,mpc5200-spi", }, {} }; diff --git a/drivers/spi/spi_ppc4xx.c b/drivers/spi/spi_ppc4xx.c index 140a18d6cf3e..6d8d4026a07a 100644 --- a/drivers/spi/spi_ppc4xx.c +++ b/drivers/spi/spi_ppc4xx.c @@ -578,7 +578,7 @@ static int __exit spi_ppc4xx_of_remove(struct of_device *op) return 0; } -static struct of_device_id spi_ppc4xx_of_match[] = { +static const struct of_device_id spi_ppc4xx_of_match[] = { { .compatible = "ibm,ppc4xx-spi", }, {}, }; diff --git a/drivers/spi/xilinx_spi_of.c b/drivers/spi/xilinx_spi_of.c index 71dc3adc0495..ed34a8d419c7 100644 --- a/drivers/spi/xilinx_spi_of.c +++ b/drivers/spi/xilinx_spi_of.c @@ -99,7 +99,7 @@ static int __exit xilinx_spi_of_remove(struct of_device *op) return xilinx_spi_remove(op); } -static struct of_device_id xilinx_spi_of_match[] = { +static const struct of_device_id xilinx_spi_of_match[] = { { .compatible = "xlnx,xps-spi-2.00.a", }, { .compatible = "xlnx,xps-spi-2.00.b", }, {} -- cgit v1.2.3 From 34b8c66173666025020e3a6f8d4a5c238b19cde5 Mon Sep 17 00:00:00 2001 From: Steven King Date: Wed, 20 Jan 2010 13:49:44 -0700 Subject: spi: Add Freescale/Motorola Coldfire QSPI driver Add support for the QSPI controller found some on Freescale/Motorola Coldfire MCUs. Full duplex, active high cs, spi modes 0-3 and word sizes 8-16 bits are supported. The hardware drives the MISO, MOSI and SCLK lines, but the chip selects are managed via GPIO and must be configured by the board code. The QSPI controller has an 80 byte buffer which allows us to transfer up to 16 words at a time. For transfers longer than 16 words, we split the buffer in half so we can update in one half while the controller is operating on the other half. Interrupt latencies then ultimately limits our sustained thru-put to something less than half the maximum speed supported by the part. Signed-off-by: Steven King Signed-off-by: Grant Likely --- drivers/spi/Kconfig | 10 + drivers/spi/Makefile | 1 + drivers/spi/coldfire_qspi.c | 640 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 651 insertions(+) create mode 100644 drivers/spi/coldfire_qspi.c (limited to 'drivers/spi') diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 82dabbca00c1..28becdd4dea9 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -100,6 +100,16 @@ config SPI_BUTTERFLY inexpensive battery powered microcontroller evaluation board. This same cable can be used to flash new firmware. +config SPI_COLDFIRE_QSPI + tristate "Freescale Coldfire QSPI controller" + depends on (M520x || M523x || M5249 || M527x || M528x || M532x) + help + This enables support for the Coldfire QSPI controller in master + mode. + + This driver can also be built as a module. If so, the module + will be called coldfire_qspi. + config SPI_DAVINCI tristate "SPI controller driver for DaVinci/DA8xx SoC's" depends on SPI_MASTER && ARCH_DAVINCI diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 84b490fb7f8a..d3a65ab8ebbf 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o obj-$(CONFIG_SPI_AU1550) += au1550_spi.o obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o +obj-$(CONFIG_SPI_COLDFIRE_QSPI) += coldfire_qspi.o obj-$(CONFIG_SPI_DAVINCI) += davinci_spi.o obj-$(CONFIG_SPI_DESIGNWARE) += dw_spi.o obj-$(CONFIG_SPI_DW_PCI) += dw_spi_pci.o diff --git a/drivers/spi/coldfire_qspi.c b/drivers/spi/coldfire_qspi.c new file mode 100644 index 000000000000..59be3efe0636 --- /dev/null +++ b/drivers/spi/coldfire_qspi.c @@ -0,0 +1,640 @@ +/* + * Freescale/Motorola Coldfire Queued SPI driver + * + * Copyright 2010 Steven King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA + * +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define DRIVER_NAME "mcfqspi" + +#define MCFQSPI_BUSCLK (MCF_BUSCLK / 2) + +#define MCFQSPI_QMR 0x00 +#define MCFQSPI_QMR_MSTR 0x8000 +#define MCFQSPI_QMR_CPOL 0x0200 +#define MCFQSPI_QMR_CPHA 0x0100 +#define MCFQSPI_QDLYR 0x04 +#define MCFQSPI_QDLYR_SPE 0x8000 +#define MCFQSPI_QWR 0x08 +#define MCFQSPI_QWR_HALT 0x8000 +#define MCFQSPI_QWR_WREN 0x4000 +#define MCFQSPI_QWR_CSIV 0x1000 +#define MCFQSPI_QIR 0x0C +#define MCFQSPI_QIR_WCEFB 0x8000 +#define MCFQSPI_QIR_ABRTB 0x4000 +#define MCFQSPI_QIR_ABRTL 0x1000 +#define MCFQSPI_QIR_WCEFE 0x0800 +#define MCFQSPI_QIR_ABRTE 0x0400 +#define MCFQSPI_QIR_SPIFE 0x0100 +#define MCFQSPI_QIR_WCEF 0x0008 +#define MCFQSPI_QIR_ABRT 0x0004 +#define MCFQSPI_QIR_SPIF 0x0001 +#define MCFQSPI_QAR 0x010 +#define MCFQSPI_QAR_TXBUF 0x00 +#define MCFQSPI_QAR_RXBUF 0x10 +#define MCFQSPI_QAR_CMDBUF 0x20 +#define MCFQSPI_QDR 0x014 +#define MCFQSPI_QCR 0x014 +#define MCFQSPI_QCR_CONT 0x8000 +#define MCFQSPI_QCR_BITSE 0x4000 +#define MCFQSPI_QCR_DT 0x2000 + +struct mcfqspi { + void __iomem *iobase; + int irq; + struct clk *clk; + struct mcfqspi_cs_control *cs_control; + + wait_queue_head_t waitq; + + struct work_struct work; + struct workqueue_struct *workq; + spinlock_t lock; + struct list_head msgq; +}; + +static void mcfqspi_wr_qmr(struct mcfqspi *mcfqspi, u16 val) +{ + writew(val, mcfqspi->iobase + MCFQSPI_QMR); +} + +static void mcfqspi_wr_qdlyr(struct mcfqspi *mcfqspi, u16 val) +{ + writew(val, mcfqspi->iobase + MCFQSPI_QDLYR); +} + +static u16 mcfqspi_rd_qdlyr(struct mcfqspi *mcfqspi) +{ + return readw(mcfqspi->iobase + MCFQSPI_QDLYR); +} + +static void mcfqspi_wr_qwr(struct mcfqspi *mcfqspi, u16 val) +{ + writew(val, mcfqspi->iobase + MCFQSPI_QWR); +} + +static void mcfqspi_wr_qir(struct mcfqspi *mcfqspi, u16 val) +{ + writew(val, mcfqspi->iobase + MCFQSPI_QIR); +} + +static void mcfqspi_wr_qar(struct mcfqspi *mcfqspi, u16 val) +{ + writew(val, mcfqspi->iobase + MCFQSPI_QAR); +} + +static void mcfqspi_wr_qdr(struct mcfqspi *mcfqspi, u16 val) +{ + writew(val, mcfqspi->iobase + MCFQSPI_QDR); +} + +static u16 mcfqspi_rd_qdr(struct mcfqspi *mcfqspi) +{ + return readw(mcfqspi->iobase + MCFQSPI_QDR); +} + +static void mcfqspi_cs_select(struct mcfqspi *mcfqspi, u8 chip_select, + bool cs_high) +{ + mcfqspi->cs_control->select(mcfqspi->cs_control, chip_select, cs_high); +} + +static void mcfqspi_cs_deselect(struct mcfqspi *mcfqspi, u8 chip_select, + bool cs_high) +{ + mcfqspi->cs_control->deselect(mcfqspi->cs_control, chip_select, cs_high); +} + +static int mcfqspi_cs_setup(struct mcfqspi *mcfqspi) +{ + return (mcfqspi->cs_control && mcfqspi->cs_control->setup) ? + mcfqspi->cs_control->setup(mcfqspi->cs_control) : 0; +} + +static void mcfqspi_cs_teardown(struct mcfqspi *mcfqspi) +{ + if (mcfqspi->cs_control && mcfqspi->cs_control->teardown) + mcfqspi->cs_control->teardown(mcfqspi->cs_control); +} + +static u8 mcfqspi_qmr_baud(u32 speed_hz) +{ + return clamp((MCFQSPI_BUSCLK + speed_hz - 1) / speed_hz, 2u, 255u); +} + +static bool mcfqspi_qdlyr_spe(struct mcfqspi *mcfqspi) +{ + return mcfqspi_rd_qdlyr(mcfqspi) & MCFQSPI_QDLYR_SPE; +} + +static irqreturn_t mcfqspi_irq_handler(int this_irq, void *dev_id) +{ + struct mcfqspi *mcfqspi = dev_id; + + /* clear interrupt */ + mcfqspi_wr_qir(mcfqspi, MCFQSPI_QIR_SPIFE | MCFQSPI_QIR_SPIF); + wake_up(&mcfqspi->waitq); + + return IRQ_HANDLED; +} + +static void mcfqspi_transfer_msg8(struct mcfqspi *mcfqspi, unsigned count, + const u8 *txbuf, u8 *rxbuf) +{ + unsigned i, n, offset = 0; + + n = min(count, 16u); + + mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_CMDBUF); + for (i = 0; i < n; ++i) + mcfqspi_wr_qdr(mcfqspi, MCFQSPI_QCR_BITSE); + + mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_TXBUF); + if (txbuf) + for (i = 0; i < n; ++i) + mcfqspi_wr_qdr(mcfqspi, *txbuf++); + else + for (i = 0; i < count; ++i) + mcfqspi_wr_qdr(mcfqspi, 0); + + count -= n; + if (count) { + u16 qwr = 0xf08; + mcfqspi_wr_qwr(mcfqspi, 0x700); + mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); + + do { + wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi)); + mcfqspi_wr_qwr(mcfqspi, qwr); + mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); + if (rxbuf) { + mcfqspi_wr_qar(mcfqspi, + MCFQSPI_QAR_RXBUF + offset); + for (i = 0; i < 8; ++i) + *rxbuf++ = mcfqspi_rd_qdr(mcfqspi); + } + n = min(count, 8u); + if (txbuf) { + mcfqspi_wr_qar(mcfqspi, + MCFQSPI_QAR_TXBUF + offset); + for (i = 0; i < n; ++i) + mcfqspi_wr_qdr(mcfqspi, *txbuf++); + } + qwr = (offset ? 0x808 : 0) + ((n - 1) << 8); + offset ^= 8; + count -= n; + } while (count); + wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi)); + mcfqspi_wr_qwr(mcfqspi, qwr); + mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); + if (rxbuf) { + mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_RXBUF + offset); + for (i = 0; i < 8; ++i) + *rxbuf++ = mcfqspi_rd_qdr(mcfqspi); + offset ^= 8; + } + } else { + mcfqspi_wr_qwr(mcfqspi, (n - 1) << 8); + mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); + } + wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi)); + if (rxbuf) { + mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_RXBUF + offset); + for (i = 0; i < n; ++i) + *rxbuf++ = mcfqspi_rd_qdr(mcfqspi); + } +} + +static void mcfqspi_transfer_msg16(struct mcfqspi *mcfqspi, unsigned count, + const u16 *txbuf, u16 *rxbuf) +{ + unsigned i, n, offset = 0; + + n = min(count, 16u); + + mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_CMDBUF); + for (i = 0; i < n; ++i) + mcfqspi_wr_qdr(mcfqspi, MCFQSPI_QCR_BITSE); + + mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_TXBUF); + if (txbuf) + for (i = 0; i < n; ++i) + mcfqspi_wr_qdr(mcfqspi, *txbuf++); + else + for (i = 0; i < count; ++i) + mcfqspi_wr_qdr(mcfqspi, 0); + + count -= n; + if (count) { + u16 qwr = 0xf08; + mcfqspi_wr_qwr(mcfqspi, 0x700); + mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); + + do { + wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi)); + mcfqspi_wr_qwr(mcfqspi, qwr); + mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); + if (rxbuf) { + mcfqspi_wr_qar(mcfqspi, + MCFQSPI_QAR_RXBUF + offset); + for (i = 0; i < 8; ++i) + *rxbuf++ = mcfqspi_rd_qdr(mcfqspi); + } + n = min(count, 8u); + if (txbuf) { + mcfqspi_wr_qar(mcfqspi, + MCFQSPI_QAR_TXBUF + offset); + for (i = 0; i < n; ++i) + mcfqspi_wr_qdr(mcfqspi, *txbuf++); + } + qwr = (offset ? 0x808 : 0x000) + ((n - 1) << 8); + offset ^= 8; + count -= n; + } while (count); + wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi)); + mcfqspi_wr_qwr(mcfqspi, qwr); + mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); + if (rxbuf) { + mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_RXBUF + offset); + for (i = 0; i < 8; ++i) + *rxbuf++ = mcfqspi_rd_qdr(mcfqspi); + offset ^= 8; + } + } else { + mcfqspi_wr_qwr(mcfqspi, (n - 1) << 8); + mcfqspi_wr_qdlyr(mcfqspi, MCFQSPI_QDLYR_SPE); + } + wait_event(mcfqspi->waitq, !mcfqspi_qdlyr_spe(mcfqspi)); + if (rxbuf) { + mcfqspi_wr_qar(mcfqspi, MCFQSPI_QAR_RXBUF + offset); + for (i = 0; i < n; ++i) + *rxbuf++ = mcfqspi_rd_qdr(mcfqspi); + } +} + +static void mcfqspi_work(struct work_struct *work) +{ + struct mcfqspi *mcfqspi = container_of(work, struct mcfqspi, work); + unsigned long flags; + + spin_lock_irqsave(&mcfqspi->lock, flags); + while (!list_empty(&mcfqspi->msgq)) { + struct spi_message *msg; + struct spi_device *spi; + struct spi_transfer *xfer; + int status = 0; + + msg = container_of(mcfqspi->msgq.next, struct spi_message, + queue); + + list_del_init(&mcfqspi->msgq); + spin_unlock_irqrestore(&mcfqspi->lock, flags); + + spi = msg->spi; + + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + bool cs_high = spi->mode & SPI_CS_HIGH; + u16 qmr = MCFQSPI_QMR_MSTR; + + if (xfer->bits_per_word) + qmr |= xfer->bits_per_word << 10; + else + qmr |= spi->bits_per_word << 10; + if (spi->mode & SPI_CPHA) + qmr |= MCFQSPI_QMR_CPHA; + if (spi->mode & SPI_CPOL) + qmr |= MCFQSPI_QMR_CPOL; + if (xfer->speed_hz) + qmr |= mcfqspi_qmr_baud(xfer->speed_hz); + else + qmr |= mcfqspi_qmr_baud(spi->max_speed_hz); + mcfqspi_wr_qmr(mcfqspi, qmr); + + mcfqspi_cs_select(mcfqspi, spi->chip_select, cs_high); + + mcfqspi_wr_qir(mcfqspi, MCFQSPI_QIR_SPIFE); + if ((xfer->bits_per_word ? xfer->bits_per_word : + spi->bits_per_word) == 8) + mcfqspi_transfer_msg8(mcfqspi, xfer->len, + xfer->tx_buf, + xfer->rx_buf); + else + mcfqspi_transfer_msg16(mcfqspi, xfer->len / 2, + xfer->tx_buf, + xfer->rx_buf); + mcfqspi_wr_qir(mcfqspi, 0); + + if (xfer->delay_usecs) + udelay(xfer->delay_usecs); + if (xfer->cs_change) { + if (!list_is_last(&xfer->transfer_list, + &msg->transfers)) + mcfqspi_cs_deselect(mcfqspi, + spi->chip_select, + cs_high); + } else { + if (list_is_last(&xfer->transfer_list, + &msg->transfers)) + mcfqspi_cs_deselect(mcfqspi, + spi->chip_select, + cs_high); + } + msg->actual_length += xfer->len; + } + msg->status = status; + msg->complete(msg->context); + + spin_lock_irqsave(&mcfqspi->lock, flags); + } + spin_unlock_irqrestore(&mcfqspi->lock, flags); +} + +static int mcfqspi_transfer(struct spi_device *spi, struct spi_message *msg) +{ + struct mcfqspi *mcfqspi; + struct spi_transfer *xfer; + unsigned long flags; + + mcfqspi = spi_master_get_devdata(spi->master); + + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + if (xfer->bits_per_word && ((xfer->bits_per_word < 8) + || (xfer->bits_per_word > 16))) { + dev_dbg(&spi->dev, + "%d bits per word is not supported\n", + xfer->bits_per_word); + goto fail; + } + if (xfer->speed_hz) { + u32 real_speed = MCFQSPI_BUSCLK / + mcfqspi_qmr_baud(xfer->speed_hz); + if (real_speed != xfer->speed_hz) + dev_dbg(&spi->dev, + "using speed %d instead of %d\n", + real_speed, xfer->speed_hz); + } + } + msg->status = -EINPROGRESS; + msg->actual_length = 0; + + spin_lock_irqsave(&mcfqspi->lock, flags); + list_add_tail(&msg->queue, &mcfqspi->msgq); + queue_work(mcfqspi->workq, &mcfqspi->work); + spin_unlock_irqrestore(&mcfqspi->lock, flags); + + return 0; +fail: + msg->status = -EINVAL; + return -EINVAL; +} + +static int mcfqspi_setup(struct spi_device *spi) +{ + if ((spi->bits_per_word < 8) || (spi->bits_per_word > 16)) { + dev_dbg(&spi->dev, "%d bits per word is not supported\n", + spi->bits_per_word); + return -EINVAL; + } + if (spi->chip_select >= spi->master->num_chipselect) { + dev_dbg(&spi->dev, "%d chip select is out of range\n", + spi->chip_select); + return -EINVAL; + } + + mcfqspi_cs_deselect(spi_master_get_devdata(spi->master), + spi->chip_select, spi->mode & SPI_CS_HIGH); + + dev_dbg(&spi->dev, + "bits per word %d, chip select %d, speed %d KHz\n", + spi->bits_per_word, spi->chip_select, + (MCFQSPI_BUSCLK / mcfqspi_qmr_baud(spi->max_speed_hz)) + / 1000); + + return 0; +} + +static int __devinit mcfqspi_probe(struct platform_device *pdev) +{ + struct spi_master *master; + struct mcfqspi *mcfqspi; + struct resource *res; + struct mcfqspi_platform_data *pdata; + int status; + + master = spi_alloc_master(&pdev->dev, sizeof(*mcfqspi)); + if (master == NULL) { + dev_dbg(&pdev->dev, "spi_alloc_master failed\n"); + return -ENOMEM; + } + + mcfqspi = spi_master_get_devdata(master); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_dbg(&pdev->dev, "platform_get_resource failed\n"); + status = -ENXIO; + goto fail0; + } + + if (!request_mem_region(res->start, resource_size(res), pdev->name)) { + dev_dbg(&pdev->dev, "request_mem_region failed\n"); + status = -EBUSY; + goto fail0; + } + + mcfqspi->iobase = ioremap(res->start, resource_size(res)); + if (!mcfqspi->iobase) { + dev_dbg(&pdev->dev, "ioremap failed\n"); + status = -ENOMEM; + goto fail1; + } + + mcfqspi->irq = platform_get_irq(pdev, 0); + if (mcfqspi->irq < 0) { + dev_dbg(&pdev->dev, "platform_get_irq failed\n"); + status = -ENXIO; + goto fail2; + } + + status = request_irq(mcfqspi->irq, mcfqspi_irq_handler, IRQF_DISABLED, + pdev->name, mcfqspi); + if (status) { + dev_dbg(&pdev->dev, "request_irq failed\n"); + goto fail2; + } + + mcfqspi->clk = clk_get(&pdev->dev, "qspi_clk"); + if (IS_ERR(mcfqspi->clk)) { + dev_dbg(&pdev->dev, "clk_get failed\n"); + status = PTR_ERR(mcfqspi->clk); + goto fail3; + } + clk_enable(mcfqspi->clk); + + mcfqspi->workq = create_singlethread_workqueue(dev_name(master->dev.parent)); + if (!mcfqspi->workq) { + dev_dbg(&pdev->dev, "create_workqueue failed\n"); + status = -ENOMEM; + goto fail4; + } + INIT_WORK(&mcfqspi->work, mcfqspi_work); + spin_lock_init(&mcfqspi->lock); + INIT_LIST_HEAD(&mcfqspi->msgq); + init_waitqueue_head(&mcfqspi->waitq); + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_dbg(&pdev->dev, "platform data is missing\n"); + goto fail5; + } + master->bus_num = pdata->bus_num; + master->num_chipselect = pdata->num_chipselect; + + mcfqspi->cs_control = pdata->cs_control; + status = mcfqspi_cs_setup(mcfqspi); + if (status) { + dev_dbg(&pdev->dev, "error initializing cs_control\n"); + goto fail5; + } + + master->mode_bits = SPI_CS_HIGH | SPI_CPOL | SPI_CPHA; + master->setup = mcfqspi_setup; + master->transfer = mcfqspi_transfer; + + platform_set_drvdata(pdev, master); + + status = spi_register_master(master); + if (status) { + dev_dbg(&pdev->dev, "spi_register_master failed\n"); + goto fail6; + } + dev_info(&pdev->dev, "Coldfire QSPI bus driver\n"); + + return 0; + +fail6: + mcfqspi_cs_teardown(mcfqspi); +fail5: + destroy_workqueue(mcfqspi->workq); +fail4: + clk_disable(mcfqspi->clk); + clk_put(mcfqspi->clk); +fail3: + free_irq(mcfqspi->irq, mcfqspi); +fail2: + iounmap(mcfqspi->iobase); +fail1: + release_mem_region(res->start, resource_size(res)); +fail0: + spi_master_put(master); + + dev_dbg(&pdev->dev, "Coldfire QSPI probe failed\n"); + + return status; +} + +static int __devexit mcfqspi_remove(struct platform_device *pdev) +{ + struct spi_master *master = platform_get_drvdata(pdev); + struct mcfqspi *mcfqspi = spi_master_get_devdata(master); + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + /* disable the hardware (set the baud rate to 0) */ + mcfqspi_wr_qmr(mcfqspi, MCFQSPI_QMR_MSTR); + + platform_set_drvdata(pdev, NULL); + mcfqspi_cs_teardown(mcfqspi); + destroy_workqueue(mcfqspi->workq); + clk_disable(mcfqspi->clk); + clk_put(mcfqspi->clk); + free_irq(mcfqspi->irq, mcfqspi); + iounmap(mcfqspi->iobase); + release_mem_region(res->start, resource_size(res)); + spi_unregister_master(master); + spi_master_put(master); + + return 0; +} + +#ifdef CONFIG_PM + +static int mcfqspi_suspend(struct device *dev) +{ + struct mcfqspi *mcfqspi = platform_get_drvdata(to_platform_device(dev)); + + clk_disable(mcfqspi->clk); + + return 0; +} + +static int mcfqspi_resume(struct device *dev) +{ + struct mcfqspi *mcfqspi = platform_get_drvdata(to_platform_device(dev)); + + clk_enable(mcfqspi->clk); + + return 0; +} + +static struct dev_pm_ops mcfqspi_dev_pm_ops = { + .suspend = mcfqspi_suspend, + .resume = mcfqspi_resume, +}; + +#define MCFQSPI_DEV_PM_OPS (&mcfqspi_dev_pm_ops) +#else +#define MCFQSPI_DEV_PM_OPS NULL +#endif + +static struct platform_driver mcfqspi_driver = { + .driver.name = DRIVER_NAME, + .driver.owner = THIS_MODULE, + .driver.pm = MCFQSPI_DEV_PM_OPS, + .remove = __devexit_p(mcfqspi_remove), +}; + +static int __init mcfqspi_init(void) +{ + return platform_driver_probe(&mcfqspi_driver, mcfqspi_probe); +} +module_init(mcfqspi_init); + +static void __exit mcfqspi_exit(void) +{ + platform_driver_unregister(&mcfqspi_driver); +} +module_exit(mcfqspi_exit); + +MODULE_AUTHOR("Steven King "); +MODULE_DESCRIPTION("Coldfire QSPI Controller Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRIVER_NAME); -- cgit v1.2.3 From e9a172f074ba85de144e63b0786c7c5c5ba93c3a Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 20 Jan 2010 13:49:44 -0700 Subject: spi/mpc8xxx: don't check platform_get_irq's return value against zero MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit platform_get_irq returns -ENXIO on failure, so !irq was probably always true. Make irq a signed variable and compare irq <= 0. Note that a return value of zero is still handled as error even though this could mean irq0. This is a followup to 305b3228f9ff4d59f49e6d34a7034d44ee8ce2f0 that changed the return value of platform_get_irq from 0 to -ENXIO on error. Signed-off-by: Uwe Kleine-König Acked-by: Anton Vorontsov Signed-off-by: Grant Likely --- drivers/spi/spi_mpc8xxx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi_mpc8xxx.c b/drivers/spi/spi_mpc8xxx.c index 1fb2a6ea328c..08065fb15817 100644 --- a/drivers/spi/spi_mpc8xxx.c +++ b/drivers/spi/spi_mpc8xxx.c @@ -1328,7 +1328,7 @@ static struct of_platform_driver of_mpc8xxx_spi_driver = { static int __devinit plat_mpc8xxx_spi_probe(struct platform_device *pdev) { struct resource *mem; - unsigned int irq; + int irq; struct spi_master *master; if (!pdev->dev.platform_data) @@ -1339,7 +1339,7 @@ static int __devinit plat_mpc8xxx_spi_probe(struct platform_device *pdev) return -EINVAL; irq = platform_get_irq(pdev, 0); - if (!irq) + if (irq <= 0) return -EINVAL; master = mpc8xxx_spi_probe(&pdev->dev, mem, irq); -- cgit v1.2.3 From ad7de729c60380a48844f885f37451158169c50d Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Wed, 20 Jan 2010 13:49:44 -0700 Subject: spi/s3c64xx: Rename s3c64xx_spi_cntrlr_info Rename 'struct s3c64xx_spi_cntrlr_info' to lesser wordy 'struct s3c64xx_spi_info' Signed-off-by: Jassi Brar Signed-off-by: Grant Likely --- drivers/spi/spi_s3c64xx.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c index 88a456dba967..ad93d5d8539c 100644 --- a/drivers/spi/spi_s3c64xx.c +++ b/drivers/spi/spi_s3c64xx.c @@ -160,7 +160,7 @@ struct s3c64xx_spi_driver_data { struct platform_device *pdev; struct spi_master *master; struct workqueue_struct *workqueue; - struct s3c64xx_spi_cntrlr_info *cntrlr_info; + struct s3c64xx_spi_info *cntrlr_info; struct spi_device *tgl_spi; struct work_struct work; struct list_head queue; @@ -180,7 +180,7 @@ static struct s3c2410_dma_client s3c64xx_spi_dma_client = { static void flush_fifo(struct s3c64xx_spi_driver_data *sdd) { - struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; void __iomem *regs = sdd->regs; unsigned long loops; u32 val; @@ -225,7 +225,7 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd, struct spi_device *spi, struct spi_transfer *xfer, int dma_mode) { - struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; void __iomem *regs = sdd->regs; u32 modecfg, chcfg; @@ -310,7 +310,7 @@ static inline void enable_cs(struct s3c64xx_spi_driver_data *sdd, static int wait_for_xfer(struct s3c64xx_spi_driver_data *sdd, struct spi_transfer *xfer, int dma_mode) { - struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; void __iomem *regs = sdd->regs; unsigned long val; int ms; @@ -389,7 +389,7 @@ static inline void disable_cs(struct s3c64xx_spi_driver_data *sdd, static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd) { - struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; void __iomem *regs = sdd->regs; u32 val; @@ -558,7 +558,7 @@ static void s3c64xx_spi_unmap_mssg(struct s3c64xx_spi_driver_data *sdd, static void handle_msg(struct s3c64xx_spi_driver_data *sdd, struct spi_message *msg) { - struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; struct spi_device *spi = msg->spi; struct s3c64xx_spi_csinfo *cs = spi->controller_data; struct spi_transfer *xfer; @@ -786,7 +786,7 @@ static int s3c64xx_spi_setup(struct spi_device *spi) { struct s3c64xx_spi_csinfo *cs = spi->controller_data; struct s3c64xx_spi_driver_data *sdd; - struct s3c64xx_spi_cntrlr_info *sci; + struct s3c64xx_spi_info *sci; struct spi_message *msg; u32 psr, speed; unsigned long flags; @@ -867,7 +867,7 @@ setup_exit: static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel) { - struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; void __iomem *regs = sdd->regs; unsigned int val; @@ -902,7 +902,7 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) { struct resource *mem_res, *dmatx_res, *dmarx_res; struct s3c64xx_spi_driver_data *sdd; - struct s3c64xx_spi_cntrlr_info *sci; + struct s3c64xx_spi_info *sci; struct spi_master *master; int ret; @@ -1078,7 +1078,7 @@ static int s3c64xx_spi_remove(struct platform_device *pdev) { struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); - struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; struct resource *mem_res; unsigned long flags; @@ -1118,7 +1118,7 @@ static int s3c64xx_spi_suspend(struct platform_device *pdev, pm_message_t state) { struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); - struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; struct s3c64xx_spi_csinfo *cs; unsigned long flags; @@ -1144,7 +1144,7 @@ static int s3c64xx_spi_resume(struct platform_device *pdev) { struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); - struct s3c64xx_spi_cntrlr_info *sci = sdd->cntrlr_info; + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; unsigned long flags; sci->cfg_gpio(pdev); -- cgit v1.2.3 From ee64a37732c23ab2bcef5fe7785fd237a7e38951 Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Wed, 20 Jan 2010 13:49:44 -0700 Subject: spi/s3c64xx: Differentiate ip and rate clock The instance of SPI clock for controller and that used for generating signals ought to be independently handled. Signed-off-by: Jassi Brar Signed-off-by: Grant Likely --- drivers/spi/spi_s3c64xx.c | 28 ++++++++-------------------- 1 file changed, 8 insertions(+), 20 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c index ad93d5d8539c..6d03d8f2de6d 100644 --- a/drivers/spi/spi_s3c64xx.c +++ b/drivers/spi/spi_s3c64xx.c @@ -1000,10 +1000,7 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) goto err4; } - if (sci->src_clk_nr == S3C64XX_SPI_SRCCLK_PCLK) - sci->src_clk = sdd->clk; - else - sci->src_clk = clk_get(&pdev->dev, sci->src_clk_name); + sci->src_clk = clk_get(&pdev->dev, sci->src_clk_name); if (IS_ERR(sci->src_clk)) { dev_err(&pdev->dev, "Unable to acquire clock '%s'\n", sci->src_clk_name); @@ -1011,7 +1008,7 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) goto err5; } - if (sci->src_clk != sdd->clk && clk_enable(sci->src_clk)) { + if (clk_enable(sci->src_clk)) { dev_err(&pdev->dev, "Couldn't enable clock '%s'\n", sci->src_clk_name); ret = -EBUSY; @@ -1053,11 +1050,9 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) err8: destroy_workqueue(sdd->workqueue); err7: - if (sci->src_clk != sdd->clk) - clk_disable(sci->src_clk); + clk_disable(sci->src_clk); err6: - if (sci->src_clk != sdd->clk) - clk_put(sci->src_clk); + clk_put(sci->src_clk); err5: clk_disable(sdd->clk); err4: @@ -1093,11 +1088,8 @@ static int s3c64xx_spi_remove(struct platform_device *pdev) destroy_workqueue(sdd->workqueue); - if (sci->src_clk != sdd->clk) - clk_disable(sci->src_clk); - - if (sci->src_clk != sdd->clk) - clk_put(sci->src_clk); + clk_disable(sci->src_clk); + clk_put(sci->src_clk); clk_disable(sdd->clk); clk_put(sdd->clk); @@ -1130,9 +1122,7 @@ static int s3c64xx_spi_suspend(struct platform_device *pdev, pm_message_t state) msleep(10); /* Disable the clock */ - if (sci->src_clk != sdd->clk) - clk_disable(sci->src_clk); - + clk_disable(sci->src_clk); clk_disable(sdd->clk); sdd->cur_speed = 0; /* Output Clock is stopped */ @@ -1150,9 +1140,7 @@ static int s3c64xx_spi_resume(struct platform_device *pdev) sci->cfg_gpio(pdev); /* Enable the clock */ - if (sci->src_clk != sdd->clk) - clk_enable(sci->src_clk); - + clk_enable(sci->src_clk); clk_enable(sdd->clk); s3c64xx_spi_hwinit(sdd, pdev->id); -- cgit v1.2.3 From b0d5d6e55340348b0de75eb691b93d7e60dba879 Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Wed, 20 Jan 2010 13:49:44 -0700 Subject: spi/s3c64xx: Move src_clk to local driver data The pointer to SPI rate source clock had better be the member of driver local data structure rather than platform specific. Also, remove definitions of variable 'sci' that are rendered useless as a consequence. Signed-off-by: Jassi Brar Signed-off-by: Grant Likely --- drivers/spi/spi_s3c64xx.c | 36 +++++++++++++++++------------------- 1 file changed, 17 insertions(+), 19 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c index 6d03d8f2de6d..3acf38119e96 100644 --- a/drivers/spi/spi_s3c64xx.c +++ b/drivers/spi/spi_s3c64xx.c @@ -137,6 +137,7 @@ /** * struct s3c64xx_spi_driver_data - Runtime info holder for SPI driver. * @clk: Pointer to the spi clock. + * @src_clk: Pointer to the clock used to generate SPI signals. * @master: Pointer to the SPI Protocol master. * @workqueue: Work queue for the SPI xfer requests. * @cntrlr_info: Platform specific data for the controller this driver manages. @@ -157,6 +158,7 @@ struct s3c64xx_spi_driver_data { void __iomem *regs; struct clk *clk; + struct clk *src_clk; struct platform_device *pdev; struct spi_master *master; struct workqueue_struct *workqueue; @@ -389,7 +391,6 @@ static inline void disable_cs(struct s3c64xx_spi_driver_data *sdd, static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd) { - struct s3c64xx_spi_info *sci = sdd->cntrlr_info; void __iomem *regs = sdd->regs; u32 val; @@ -435,7 +436,7 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd) /* Configure Clock */ val = readl(regs + S3C64XX_SPI_CLK_CFG); val &= ~S3C64XX_SPI_PSR_MASK; - val |= ((clk_get_rate(sci->src_clk) / sdd->cur_speed / 2 - 1) + val |= ((clk_get_rate(sdd->src_clk) / sdd->cur_speed / 2 - 1) & S3C64XX_SPI_PSR_MASK); writel(val, regs + S3C64XX_SPI_CLK_CFG); @@ -831,17 +832,17 @@ static int s3c64xx_spi_setup(struct spi_device *spi) } /* Check if we can provide the requested rate */ - speed = clk_get_rate(sci->src_clk) / 2 / (0 + 1); /* Max possible */ + speed = clk_get_rate(sdd->src_clk) / 2 / (0 + 1); /* Max possible */ if (spi->max_speed_hz > speed) spi->max_speed_hz = speed; - psr = clk_get_rate(sci->src_clk) / 2 / spi->max_speed_hz - 1; + psr = clk_get_rate(sdd->src_clk) / 2 / spi->max_speed_hz - 1; psr &= S3C64XX_SPI_PSR_MASK; if (psr == S3C64XX_SPI_PSR_MASK) psr--; - speed = clk_get_rate(sci->src_clk) / 2 / (psr + 1); + speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1); if (spi->max_speed_hz < speed) { if (psr+1 < S3C64XX_SPI_PSR_MASK) { psr++; @@ -851,7 +852,7 @@ static int s3c64xx_spi_setup(struct spi_device *spi) } } - speed = clk_get_rate(sci->src_clk) / 2 / (psr + 1); + speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1); if (spi->max_speed_hz >= speed) spi->max_speed_hz = speed; else @@ -1000,15 +1001,15 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) goto err4; } - sci->src_clk = clk_get(&pdev->dev, sci->src_clk_name); - if (IS_ERR(sci->src_clk)) { + sdd->src_clk = clk_get(&pdev->dev, sci->src_clk_name); + if (IS_ERR(sdd->src_clk)) { dev_err(&pdev->dev, "Unable to acquire clock '%s'\n", sci->src_clk_name); - ret = PTR_ERR(sci->src_clk); + ret = PTR_ERR(sdd->src_clk); goto err5; } - if (clk_enable(sci->src_clk)) { + if (clk_enable(sdd->src_clk)) { dev_err(&pdev->dev, "Couldn't enable clock '%s'\n", sci->src_clk_name); ret = -EBUSY; @@ -1050,9 +1051,9 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) err8: destroy_workqueue(sdd->workqueue); err7: - clk_disable(sci->src_clk); + clk_disable(sdd->src_clk); err6: - clk_put(sci->src_clk); + clk_put(sdd->src_clk); err5: clk_disable(sdd->clk); err4: @@ -1073,7 +1074,6 @@ static int s3c64xx_spi_remove(struct platform_device *pdev) { struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); - struct s3c64xx_spi_info *sci = sdd->cntrlr_info; struct resource *mem_res; unsigned long flags; @@ -1088,8 +1088,8 @@ static int s3c64xx_spi_remove(struct platform_device *pdev) destroy_workqueue(sdd->workqueue); - clk_disable(sci->src_clk); - clk_put(sci->src_clk); + clk_disable(sdd->src_clk); + clk_put(sdd->src_clk); clk_disable(sdd->clk); clk_put(sdd->clk); @@ -1110,8 +1110,6 @@ static int s3c64xx_spi_suspend(struct platform_device *pdev, pm_message_t state) { struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); - struct s3c64xx_spi_info *sci = sdd->cntrlr_info; - struct s3c64xx_spi_csinfo *cs; unsigned long flags; spin_lock_irqsave(&sdd->lock, flags); @@ -1122,7 +1120,7 @@ static int s3c64xx_spi_suspend(struct platform_device *pdev, pm_message_t state) msleep(10); /* Disable the clock */ - clk_disable(sci->src_clk); + clk_disable(sdd->src_clk); clk_disable(sdd->clk); sdd->cur_speed = 0; /* Output Clock is stopped */ @@ -1140,7 +1138,7 @@ static int s3c64xx_spi_resume(struct platform_device *pdev) sci->cfg_gpio(pdev); /* Enable the clock */ - clk_enable(sci->src_clk); + clk_enable(sdd->src_clk); clk_enable(sdd->clk); s3c64xx_spi_hwinit(sdd, pdev->id); -- cgit v1.2.3 From ef6c680dc5a182a79b09567168d6713f46c85784 Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Wed, 20 Jan 2010 13:49:44 -0700 Subject: spi/s3c64xx: Check before mem-region release Add precautionary check before releasing memory region. Signed-off-by: Jassi Brar Signed-off-by: Grant Likely --- drivers/spi/spi_s3c64xx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c index 3acf38119e96..0e883f9c720b 100644 --- a/drivers/spi/spi_s3c64xx.c +++ b/drivers/spi/spi_s3c64xx.c @@ -1097,7 +1097,8 @@ static int s3c64xx_spi_remove(struct platform_device *pdev) iounmap((void *) sdd->regs); mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(mem_res->start, resource_size(mem_res)); + if (mem_res != NULL) + release_mem_region(mem_res->start, resource_size(mem_res)); platform_set_drvdata(pdev, NULL); spi_master_put(master); -- cgit v1.2.3 From e6b873c9666015484a01373a4eebc6cfa82e670d Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Wed, 20 Jan 2010 13:49:45 -0700 Subject: spi/s3c64xx: Include moved header Header for platform specific stuff has been rename to include the SoC type. Include the new header instead. Signed-off-by: Jassi Brar Signed-off-by: Grant Likely --- drivers/spi/spi_s3c64xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c index 0e883f9c720b..9fa0b99e1607 100644 --- a/drivers/spi/spi_s3c64xx.c +++ b/drivers/spi/spi_s3c64xx.c @@ -28,7 +28,7 @@ #include #include -#include +#include /* Registers and bit-fields */ -- cgit v1.2.3 From fa0fcde66ac3360678360104b24492015e7b852b Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Wed, 20 Jan 2010 13:49:45 -0700 Subject: spi/s3c64xx: Add new parameter to cs callback Since most of the chip-selects are simply going to be like gpio_set_value, it would do good to have the same callback type so that it could simply be made to point at gpio_set_value. Signed-off-by: Jassi Brar Signed-off-by: Grant Likely --- drivers/spi/spi_s3c64xx.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c index 9fa0b99e1607..32db69540fa9 100644 --- a/drivers/spi/spi_s3c64xx.c +++ b/drivers/spi/spi_s3c64xx.c @@ -300,13 +300,14 @@ static inline void enable_cs(struct s3c64xx_spi_driver_data *sdd, if (sdd->tgl_spi != spi) { /* if last mssg on diff device */ /* Deselect the last toggled device */ cs = sdd->tgl_spi->controller_data; - cs->set_level(spi->mode & SPI_CS_HIGH ? 0 : 1); + cs->set_level(cs->line, + spi->mode & SPI_CS_HIGH ? 0 : 1); } sdd->tgl_spi = NULL; } cs = spi->controller_data; - cs->set_level(spi->mode & SPI_CS_HIGH ? 1 : 0); + cs->set_level(cs->line, spi->mode & SPI_CS_HIGH ? 1 : 0); } static int wait_for_xfer(struct s3c64xx_spi_driver_data *sdd, @@ -386,7 +387,7 @@ static inline void disable_cs(struct s3c64xx_spi_driver_data *sdd, if (sdd->tgl_spi == spi) sdd->tgl_spi = NULL; - cs->set_level(spi->mode & SPI_CS_HIGH ? 0 : 1); + cs->set_level(cs->line, spi->mode & SPI_CS_HIGH ? 0 : 1); } static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd) -- cgit v1.2.3 From b490e3704ccee12deb295f96029d68e0daf02feb Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Wed, 20 Jan 2010 13:49:45 -0700 Subject: spi/dw_spi: bug fix in wait_till_not_busy() Make the driver wait at least for 1 jiffie before issuing the warning, no matter what HZ is set to Signed-off-by: Feng Tang Signed-off-by: Grant Likely --- drivers/spi/dw_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/spi') diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c index 31620fae77be..521d680af289 100644 --- a/drivers/spi/dw_spi.c +++ b/drivers/spi/dw_spi.c @@ -161,7 +161,7 @@ static inline void mrst_spi_debugfs_remove(struct dw_spi *dws) static void wait_till_not_busy(struct dw_spi *dws) { - unsigned long end = jiffies + usecs_to_jiffies(1000); + unsigned long end = jiffies + 1 + usecs_to_jiffies(1000); while (time_before(jiffies, end)) { if (!(dw_readw(dws, sr) & SR_BUSY)) -- cgit v1.2.3 From 51f921c1eb1124fb99ab0728c19e8e14c82c81be Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Wed, 20 Jan 2010 13:49:45 -0700 Subject: spi/dw_spi: add a missed dw_spi_remove_host() in exit sequence Signed-off-by: Feng Tang Signed-off-by: Grant Likely --- drivers/spi/dw_spi_pci.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/spi') diff --git a/drivers/spi/dw_spi_pci.c b/drivers/spi/dw_spi_pci.c index 34ba69161734..7980f1443ce1 100644 --- a/drivers/spi/dw_spi_pci.c +++ b/drivers/spi/dw_spi_pci.c @@ -98,6 +98,7 @@ static void __devexit spi_pci_remove(struct pci_dev *pdev) struct dw_spi_pci *dwpci = pci_get_drvdata(pdev); pci_set_drvdata(pdev, NULL); + dw_spi_remove_host(&dwpci->dws); iounmap(dwpci->dws.regs); pci_release_region(pdev, 0); kfree(dwpci); -- cgit v1.2.3 From 552e450929a7298cc8834fd2824a60b2e914f70e Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Wed, 20 Jan 2010 13:49:45 -0700 Subject: spi/dw_spi: refine the IRQ mode working flow Now dw_spi core fully supports 3 transfer modes: pure polling, DMA and IRQ mode. IRQ mode will use the FIFO half empty as the IRQ trigger, so each interface driver need set the fifo_len, so that core driver can handle it properly Signed-off-by: Feng Tang Signed-off-by: Grant Likely --- drivers/spi/dw_spi.c | 64 ++++++++++++++++++++++++++++------------------ drivers/spi/dw_spi_pci.c | 1 + include/linux/spi/dw_spi.h | 1 + 3 files changed, 41 insertions(+), 25 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c index 521d680af289..1bb709b3920f 100644 --- a/drivers/spi/dw_spi.c +++ b/drivers/spi/dw_spi.c @@ -358,6 +358,8 @@ static void transfer_complete(struct dw_spi *dws) static irqreturn_t interrupt_transfer(struct dw_spi *dws) { u16 irq_status, irq_mask = 0x3f; + u32 int_level = dws->fifo_len / 2; + u32 left; irq_status = dw_readw(dws, isr) & irq_mask; /* Error handling */ @@ -369,22 +371,23 @@ static irqreturn_t interrupt_transfer(struct dw_spi *dws) return IRQ_HANDLED; } - /* INT comes from tx */ - if (dws->tx && (irq_status & SPI_INT_TXEI)) { - while (dws->tx < dws->tx_end) + if (irq_status & SPI_INT_TXEI) { + spi_mask_intr(dws, SPI_INT_TXEI); + + left = (dws->tx_end - dws->tx) / dws->n_bytes; + left = (left > int_level) ? int_level : left; + + while (left--) dws->write(dws); + dws->read(dws); - if (dws->tx == dws->tx_end) { - spi_mask_intr(dws, SPI_INT_TXEI); + /* Re-enable the IRQ if there is still data left to tx */ + if (dws->tx_end > dws->tx) + spi_umask_intr(dws, SPI_INT_TXEI); + else transfer_complete(dws); - } } - /* INT comes from rx */ - if (dws->rx && (irq_status & SPI_INT_RXFI)) { - if (dws->read(dws)) - transfer_complete(dws); - } return IRQ_HANDLED; } @@ -428,6 +431,7 @@ static void pump_transfers(unsigned long data) u8 bits = 0; u8 imask = 0; u8 cs_change = 0; + u16 txint_level = 0; u16 clk_div = 0; u32 speed = 0; u32 cr0 = 0; @@ -438,6 +442,9 @@ static void pump_transfers(unsigned long data) chip = dws->cur_chip; spi = message->spi; + if (unlikely(!chip->clk_div)) + chip->clk_div = dws->max_freq / chip->speed_hz; + if (message->state == ERROR_STATE) { message->status = -EIO; goto early_exit; @@ -492,7 +499,7 @@ static void pump_transfers(unsigned long data) /* clk_div doesn't support odd number */ clk_div = dws->max_freq / speed; - clk_div = (clk_div >> 1) << 1; + clk_div = (clk_div + 1) & 0xfffe; chip->speed_hz = speed; chip->clk_div = clk_div; @@ -535,11 +542,16 @@ static void pump_transfers(unsigned long data) /* Check if current transfer is a DMA transaction */ dws->dma_mapped = map_dma_buffers(dws); + /* + * Interrupt mode + * we only need set the TXEI IRQ, as TX/RX always happen syncronizely + */ if (!dws->dma_mapped && !chip->poll_mode) { - if (dws->rx) - imask |= SPI_INT_RXFI; - if (dws->tx) - imask |= SPI_INT_TXEI; + int templen = dws->len / dws->n_bytes; + txint_level = dws->fifo_len / 2; + txint_level = (templen > txint_level) ? txint_level : templen; + + imask |= SPI_INT_TXEI; dws->transfer_handler = interrupt_transfer; } @@ -549,21 +561,23 @@ static void pump_transfers(unsigned long data) * 2. clk_div is changed * 3. control value changes */ - if (dw_readw(dws, ctrl0) != cr0 || cs_change || clk_div) { + if (dw_readw(dws, ctrl0) != cr0 || cs_change || clk_div || imask) { spi_enable_chip(dws, 0); if (dw_readw(dws, ctrl0) != cr0) dw_writew(dws, ctrl0, cr0); + spi_set_clk(dws, clk_div ? clk_div : chip->clk_div); + spi_chip_sel(dws, spi->chip_select); + /* Set the interrupt mask, for poll mode just diable all int */ spi_mask_intr(dws, 0xff); - if (!chip->poll_mode) + if (imask) spi_umask_intr(dws, imask); + if (txint_level) + dw_writew(dws, txfltr, txint_level); - spi_set_clk(dws, clk_div ? clk_div : chip->clk_div); - spi_chip_sel(dws, spi->chip_select); spi_enable_chip(dws, 1); - if (cs_change) dws->prev_chip = chip; } @@ -712,11 +726,11 @@ static int dw_spi_setup(struct spi_device *spi) } chip->bits_per_word = spi->bits_per_word; + if (!spi->max_speed_hz) { + dev_err(&spi->dev, "No max speed HZ parameter\n"); + return -EINVAL; + } chip->speed_hz = spi->max_speed_hz; - if (chip->speed_hz) - chip->clk_div = 25000000 / chip->speed_hz; - else - chip->clk_div = 8; /* default value */ chip->tmode = 0; /* Tx & Rx */ /* Default SPI mode is SCPOL = 0, SCPH = 0 */ diff --git a/drivers/spi/dw_spi_pci.c b/drivers/spi/dw_spi_pci.c index 7980f1443ce1..1f0735f9cc76 100644 --- a/drivers/spi/dw_spi_pci.c +++ b/drivers/spi/dw_spi_pci.c @@ -73,6 +73,7 @@ static int __devinit spi_pci_probe(struct pci_dev *pdev, dws->num_cs = 4; dws->max_freq = 25000000; /* for Moorestwon */ dws->irq = pdev->irq; + dws->fifo_len = 40; /* FIFO has 40 words buffer */ ret = dw_spi_add_host(dws); if (ret) diff --git a/include/linux/spi/dw_spi.h b/include/linux/spi/dw_spi.h index 51b3e771a9a3..1a127a31e017 100644 --- a/include/linux/spi/dw_spi.h +++ b/include/linux/spi/dw_spi.h @@ -90,6 +90,7 @@ struct dw_spi { unsigned long paddr; u32 iolen; int irq; + u32 fifo_len; /* depth of the FIFO buffer */ u32 max_freq; /* max bus freq supported */ u16 bus_num; -- cgit v1.2.3 From ac48eee064f743a198cb38e5a6a62c3f1082ebc1 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 20 Jan 2010 13:49:45 -0700 Subject: spi: update MSIOF includes Update the MSIOF driver to remove the architecture speficic spi header file and add err.h. This makes the driver compile on non-SH architectures. Signed-off-by: Magnus Damm Signed-off-by: Grant Likely --- drivers/spi/spi_sh_msiof.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi_sh_msiof.c b/drivers/spi/spi_sh_msiof.c index 51e5e1dfa6e5..3b5b1be57057 100644 --- a/drivers/spi/spi_sh_msiof.c +++ b/drivers/spi/spi_sh_msiof.c @@ -20,12 +20,12 @@ #include #include #include +#include #include #include #include -#include #include struct sh_msiof_spi_priv { -- cgit v1.2.3 From f4d4ecfe788b4141d8c90cfc3ac2831f620f5c1b Mon Sep 17 00:00:00 2001 From: Alberto Panizzo Date: Wed, 20 Jan 2010 13:49:45 -0700 Subject: spi/spi_imx: add device information by switching pr_debug() to dev_dbg() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Useful when debugging multiple spi channels. Signed-off-by: Alberto Panizzo Acked-by: Uwe Kleine-König Signed-off-by: Grant Likely --- drivers/spi/spi_imx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c index 1893f1e96dc4..0ddbbe45e834 100644 --- a/drivers/spi/spi_imx.c +++ b/drivers/spi/spi_imx.c @@ -469,7 +469,7 @@ static int spi_imx_setup(struct spi_device *spi) struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master); int gpio = spi_imx->chipselect[spi->chip_select]; - pr_debug("%s: mode %d, %u bpw, %d hz\n", __func__, + dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n", __func__, spi->mode, spi->bits_per_word, spi->max_speed_hz); if (gpio >= 0) -- cgit v1.2.3 From 9778214990af88ec6720bd771d7fc0fa1b140b02 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 20 Jan 2010 13:49:45 -0700 Subject: spi: xilinx_spi: Fix up I/O routine wrapping bogosity. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit xilinx_spi presently makes some fairly questionable assumptions about I/O routines, and attempts to assign ioread32/iowrite32 and friends directly to its own internal function pointers. On many platforms these I/O routines are macros or wrappers and not actual functions on their own, resulting in things like: ERROR: "ioread32be" [drivers/spi/xilinx_spi.ko] undefined! ERROR: "iowrite32be" [drivers/spi/xilinx_spi.ko] undefined! ERROR: "iowrite32" [drivers/spi/xilinx_spi.ko] undefined! ERROR: "ioread32" [drivers/spi/xilinx_spi.ko] undefined! If xilinx_spi wants to do this sort of casting, it needs to provide its own wrappers for these, or change how it does accesses completely. I've opted for the first approach, and the attached silly patch does that. If someone with the hardware available wants to give the second option a try that's ok too. In any event, the current code is broken for at least: arm, avr32, blackfin, microblaze, mn10300, and sh. Signed-off-by: Paul Mundt Acked-by: Richard Röjfors Signed-off-by: Grant Likely --- drivers/spi/xilinx_spi.c | 28 ++++++++++++++++++++++++---- 1 file changed, 24 insertions(+), 4 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c index 9f386379c169..1b47363cb73f 100644 --- a/drivers/spi/xilinx_spi.c +++ b/drivers/spi/xilinx_spi.c @@ -93,6 +93,26 @@ struct xilinx_spi { void (*rx_fn) (struct xilinx_spi *); }; +static void xspi_write32(u32 val, void __iomem *addr) +{ + iowrite32(val, addr); +} + +static unsigned int xspi_read32(void __iomem *addr) +{ + return ioread32(addr); +} + +static void xspi_write32_be(u32 val, void __iomem *addr) +{ + iowrite32be(val, addr); +} + +static unsigned int xspi_read32_be(void __iomem *addr) +{ + return ioread32be(addr); +} + static void xspi_tx8(struct xilinx_spi *xspi) { xspi->write_fn(*xspi->tx_ptr, xspi->regs + XSPI_TXD_OFFSET); @@ -374,11 +394,11 @@ struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem, xspi->mem = *mem; xspi->irq = irq; if (pdata->little_endian) { - xspi->read_fn = ioread32; - xspi->write_fn = iowrite32; + xspi->read_fn = xspi_read32; + xspi->write_fn = xspi_write32; } else { - xspi->read_fn = ioread32be; - xspi->write_fn = iowrite32be; + xspi->read_fn = xspi_read32_be; + xspi->write_fn = xspi_write32_be; } xspi->bits_per_word = pdata->bits_per_word; if (xspi->bits_per_word == 8) { -- cgit v1.2.3 From 99147b5c4167612a987860b661b9f8b79e66b81f Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Wed, 20 Jan 2010 14:03:39 -0700 Subject: spi/dw_spi: fix __init/__devinit section mismatch Section mismatch in reference from the function dw_spi_add_host() to the function init_queue() Signed-off-by: Grant Likely --- drivers/spi/dw_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/spi') diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c index 1bb709b3920f..f713af8309e3 100644 --- a/drivers/spi/dw_spi.c +++ b/drivers/spi/dw_spi.c @@ -749,7 +749,7 @@ static void dw_spi_cleanup(struct spi_device *spi) kfree(chip); } -static int __init init_queue(struct dw_spi *dws) +static int __devinit init_queue(struct dw_spi *dws) { INIT_LIST_HEAD(&dws->queue); spin_lock_init(&dws->lock); -- cgit v1.2.3 From c587b6fa05106606053fc5e8e344f07cd34ace23 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Thu, 21 Jan 2010 10:41:10 +0800 Subject: spi/dw_spi: add a FIFO depth detection FIFO depth is configurable for each implementation of DW core, so add a depth detection for those interface drivers who don't set the fifo_len explicitly Signed-off-by: Feng Tang Acked-by: Jean-Hugues Deschenes Signed-off-by: Grant Likely --- drivers/spi/dw_spi.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers/spi') diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c index f713af8309e3..d948ef4f3910 100644 --- a/drivers/spi/dw_spi.c +++ b/drivers/spi/dw_spi.c @@ -831,6 +831,22 @@ static void spi_hw_init(struct dw_spi *dws) spi_mask_intr(dws, 0xff); spi_enable_chip(dws, 1); flush(dws); + + /* + * Try to detect the FIFO depth if not set by interface driver, + * the depth could be from 2 to 256 from HW spec + */ + if (!dws->fifo_len) { + u32 fifo; + for (fifo = 2; fifo <= 257; fifo++) { + dw_writew(dws, txfltr, fifo); + if (fifo != dw_readw(dws, txfltr)) + break; + } + + dws->fifo_len = (fifo == 257) ? 0 : fifo; + dw_writew(dws, txfltr, 0); + } } int __devinit dw_spi_add_host(struct dw_spi *dws) -- cgit v1.2.3 From 20a588fcc862df79d8fcafbc41950e3ae93dea09 Mon Sep 17 00:00:00 2001 From: George Shore Date: Thu, 21 Jan 2010 11:40:49 +0000 Subject: spi/dw_spi: add return value to empty mrst_spi_debugfs_init() As per the function signature. Signed-off-by: George Shore Signed-off-by: Grant Likely --- drivers/spi/dw_spi.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/spi') diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c index d948ef4f3910..cf945a4cc419 100644 --- a/drivers/spi/dw_spi.c +++ b/drivers/spi/dw_spi.c @@ -152,6 +152,7 @@ static void mrst_spi_debugfs_remove(struct dw_spi *dws) #else static inline int mrst_spi_debugfs_init(struct dw_spi *dws) { + return 0; } static inline void mrst_spi_debugfs_remove(struct dw_spi *dws) -- cgit v1.2.3 From 426c0093d8da4d7b6b0e62cda917b1bae26db4c2 Mon Sep 17 00:00:00 2001 From: George Shore Date: Thu, 21 Jan 2010 11:40:50 +0000 Subject: spi/dw_spi: fixed a spelling typo in a warning message. Signed-off-by: George Shore Signed-off-by: Grant Likely --- drivers/spi/dw_spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/spi') diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c index cf945a4cc419..d0a080a5b598 100644 --- a/drivers/spi/dw_spi.c +++ b/drivers/spi/dw_spi.c @@ -169,7 +169,7 @@ static void wait_till_not_busy(struct dw_spi *dws) return; } dev_err(&dws->master->dev, - "DW SPI: Stutus keeps busy for 1000us after a read/write!\n"); + "DW SPI: Status keeps busy for 1000us after a read/write!\n"); } static void flush(struct dw_spi *dws) -- cgit v1.2.3 From f4aec798ae5a837a1f062e295f9a5f1b00962589 Mon Sep 17 00:00:00 2001 From: George Shore Date: Thu, 21 Jan 2010 11:40:51 +0000 Subject: spi/dw_spi: remove conditional from 'poll_transfer'. The 'poll_transfer' function employs a conditional to test whether the transmit buffer is valid; in doing so, on a receive operation no data is clocked out, thus no data is clocked in and ultimately errors appear. This removes the conditional as the transmit function will be set to a null writer when the transmit buffer is invalid, allowing the driver to clock 0x00 out to the device to receive data from the device. Signed-off-by: George Shore Signed-off-by: Grant Likely --- drivers/spi/dw_spi.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c index d0a080a5b598..3853df5db052 100644 --- a/drivers/spi/dw_spi.c +++ b/drivers/spi/dw_spi.c @@ -408,12 +408,9 @@ static irqreturn_t dw_spi_irq(int irq, void *dev_id) /* Must be called inside pump_transfers() */ static void poll_transfer(struct dw_spi *dws) { - if (dws->tx) { - while (dws->write(dws)) - dws->read(dws); - } + while (dws->write(dws)) + dws->read(dws); - dws->read(dws); transfer_complete(dws); } -- cgit v1.2.3 From 052dc7c45d8f685fb3720a08331ba3e91e87937e Mon Sep 17 00:00:00 2001 From: George Shore Date: Thu, 21 Jan 2010 11:40:52 +0000 Subject: spi/dw_spi: conditional transfer mode changes This allows the switching between transfer modes between 'transmit only', 'receive only' and 'transmit and receive' modes. Due to the design of the SPI block, changing transfer modes requires that the block be disabled; in doing so the chipselect line is inherently deasserted and (usually) the attached device discards its state. Consequentially, switching modes requires that a platform-specific chipselect function has been defined so that the chipselect is not dropped during the change. Signed-off-by: George Shore Signed-off-by: Grant Likely --- drivers/spi/dw_spi.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers/spi') diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c index 3853df5db052..e434320fded8 100644 --- a/drivers/spi/dw_spi.c +++ b/drivers/spi/dw_spi.c @@ -537,6 +537,22 @@ static void pump_transfers(unsigned long data) } message->state = RUNNING_STATE; + /* + * Adjust transfer mode if necessary. Requires platform dependent + * chipselect mechanism. + */ + if (dws->cs_control) { + if (dws->rx && dws->tx) + chip->tmode = 0x00; + else if (dws->rx) + chip->tmode = 0x02; + else + chip->tmode = 0x01; + + cr0 &= ~(0x3 << SPI_MODE_OFFSET); + cr0 |= (chip->tmode << SPI_TMOD_OFFSET); + } + /* Check if current transfer is a DMA transaction */ dws->dma_mapped = map_dma_buffers(dws); -- cgit v1.2.3 From 8bcb4a88c5834c6a0fc7140edea32186664fe360 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Thu, 21 Jan 2010 07:25:38 -0700 Subject: spi/dw_spi: fix missing export of dw_spi_remove_host So that interface drivers could be built as modules Signed-off-by: Feng Tang Signed-off-by: Grant Likely --- drivers/spi/dw_spi.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/spi') diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c index e434320fded8..8ed38f1d6c18 100644 --- a/drivers/spi/dw_spi.c +++ b/drivers/spi/dw_spi.c @@ -957,6 +957,7 @@ void __devexit dw_spi_remove_host(struct dw_spi *dws) /* Disconnect from the SPI framework */ spi_unregister_master(dws->master); } +EXPORT_SYMBOL(dw_spi_remove_host); int dw_spi_suspend_host(struct dw_spi *dws) { -- cgit v1.2.3 From f7b6fd6d1d3833529f1626c761ba7e338586d35e Mon Sep 17 00:00:00 2001 From: Jean-Hugues Deschenes Date: Thu, 21 Jan 2010 07:46:42 -0700 Subject: Memory-mapped dw_spi driver Adds a memory-mapped I/O dw_spi platform device. Signed-off-by: Jean-Hugues Deschenes Signed-off-by: Grant Likely --- drivers/spi/Kconfig | 4 ++ drivers/spi/Makefile | 1 + drivers/spi/dw_spi_mmio.c | 148 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 153 insertions(+) create mode 100644 drivers/spi/dw_spi_mmio.c (limited to 'drivers/spi') diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 28becdd4dea9..201746ad825c 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -334,6 +334,10 @@ config SPI_DW_PCI tristate "PCI interface driver for DW SPI core" depends on SPI_DESIGNWARE && PCI +config SPI_DW_MMIO + tristate "Memory-mapped io interface driver for DW SPI core" + depends on SPI_DESIGNWARE + # # There are lots of SPI device types, with sensors and memory # being probably the most widely used ones. diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index d3a65ab8ebbf..d7d0f89b797b 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_SPI_COLDFIRE_QSPI) += coldfire_qspi.o obj-$(CONFIG_SPI_DAVINCI) += davinci_spi.o obj-$(CONFIG_SPI_DESIGNWARE) += dw_spi.o obj-$(CONFIG_SPI_DW_PCI) += dw_spi_pci.o +obj-$(CONFIG_SPI_DW_MMIO) += dw_spi_mmio.o obj-$(CONFIG_SPI_GPIO) += spi_gpio.o obj-$(CONFIG_SPI_IMX) += spi_imx.o obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o diff --git a/drivers/spi/dw_spi_mmio.c b/drivers/spi/dw_spi_mmio.c new file mode 100644 index 000000000000..26c4b49bdd5c --- /dev/null +++ b/drivers/spi/dw_spi_mmio.c @@ -0,0 +1,148 @@ +/* + * dw_spi_mmio.c - Memory-mapped interface driver for DW SPI Core + * + * Copyright (c) 2010, Octasic semiconductor. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#define DRIVER_NAME "dw_spi_mmio" + +struct dw_spi_mmio { + struct dw_spi dws; + struct clk *clk; +}; + +static int __devinit dw_spi_mmio_probe(struct platform_device *pdev) +{ + struct dw_spi_mmio *dwsmmio; + struct dw_spi *dws; + struct resource *mem, *ioarea; + int ret; + + dwsmmio = kzalloc(sizeof(struct dw_spi_mmio), GFP_KERNEL); + if (!dwsmmio) { + ret = -ENOMEM; + goto err_end; + } + + dws = &dwsmmio->dws; + + /* Get basic io resource and map it */ + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) { + dev_err(&pdev->dev, "no mem resource?\n"); + ret = -EINVAL; + goto err_kfree; + } + + ioarea = request_mem_region(mem->start, resource_size(mem), + pdev->name); + if (!ioarea) { + dev_err(&pdev->dev, "SPI region already claimed\n"); + ret = -EBUSY; + goto err_kfree; + } + + dws->regs = ioremap_nocache(mem->start, resource_size(mem)); + if (!dws->regs) { + dev_err(&pdev->dev, "SPI region already mapped\n"); + ret = -ENOMEM; + goto err_release_reg; + } + + dws->irq = platform_get_irq(pdev, 0); + if (dws->irq < 0) { + dev_err(&pdev->dev, "no irq resource?\n"); + ret = dws->irq; /* -ENXIO */ + goto err_unmap; + } + + dwsmmio->clk = clk_get(&pdev->dev, NULL); + if (!dwsmmio->clk) { + ret = -ENODEV; + goto err_irq; + } + clk_enable(dwsmmio->clk); + + dws->parent_dev = &pdev->dev; + dws->bus_num = 0; + dws->num_cs = 4; + dws->max_freq = clk_get_rate(dwsmmio->clk); + + ret = dw_spi_add_host(dws); + if (ret) + goto err_clk; + + platform_set_drvdata(pdev, dwsmmio); + return 0; + +err_clk: + clk_disable(dwsmmio->clk); + clk_put(dwsmmio->clk); + dwsmmio->clk = NULL; +err_irq: + free_irq(dws->irq, dws); +err_unmap: + iounmap(dws->regs); +err_release_reg: + release_mem_region(mem->start, resource_size(mem)); +err_kfree: + kfree(dwsmmio); +err_end: + return ret; +} + +static int __devexit dw_spi_mmio_remove(struct platform_device *pdev) +{ + struct dw_spi_mmio *dwsmmio = platform_get_drvdata(pdev); + struct resource *mem; + + platform_set_drvdata(pdev, NULL); + + clk_disable(dwsmmio->clk); + clk_put(dwsmmio->clk); + dwsmmio->clk = NULL; + + free_irq(dwsmmio->dws.irq, &dwsmmio->dws); + dw_spi_remove_host(&dwsmmio->dws); + iounmap(dwsmmio->dws.regs); + kfree(dwsmmio); + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(mem->start, resource_size(mem)); + return 0; +} + +static struct platform_driver dw_spi_mmio_driver = { + .remove = __devexit_p(dw_spi_mmio_remove), + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init dw_spi_mmio_init(void) +{ + return platform_driver_probe(&dw_spi_mmio_driver, dw_spi_mmio_probe); +} + +static void __exit dw_spi_mmio_exit(void) +{ + platform_driver_unregister(&dw_spi_mmio_driver); +} + +module_init(dw_spi_mmio_init); +module_exit(dw_spi_mmio_exit); + +MODULE_AUTHOR("Jean-Hugues Deschenes "); +MODULE_DESCRIPTION("Memory-mapped I/O interface driver for DW SPI Core"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3 From 0a4c1d7d446d3ed6179f907541d180e49b56d4f4 Mon Sep 17 00:00:00 2001 From: Jean-Hugues Deschenes Date: Thu, 21 Jan 2010 09:55:42 -0700 Subject: spi/dw_spi: mmio code style fixups Minor code style cleanups following comments by Wolfram Sang Signed-off-by: Jean-Hugues Deschenes Signed-off-by: Grant Likely --- drivers/spi/dw_spi_mmio.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/dw_spi_mmio.c b/drivers/spi/dw_spi_mmio.c index 26c4b49bdd5c..e35b45ac5174 100644 --- a/drivers/spi/dw_spi_mmio.c +++ b/drivers/spi/dw_spi_mmio.c @@ -17,8 +17,8 @@ #define DRIVER_NAME "dw_spi_mmio" struct dw_spi_mmio { - struct dw_spi dws; - struct clk *clk; + struct dw_spi dws; + struct clk *clk; }; static int __devinit dw_spi_mmio_probe(struct platform_device *pdev) @@ -134,13 +134,12 @@ static int __init dw_spi_mmio_init(void) { return platform_driver_probe(&dw_spi_mmio_driver, dw_spi_mmio_probe); } +module_init(dw_spi_mmio_init); static void __exit dw_spi_mmio_exit(void) { platform_driver_unregister(&dw_spi_mmio_driver); } - -module_init(dw_spi_mmio_init); module_exit(dw_spi_mmio_exit); MODULE_AUTHOR("Jean-Hugues Deschenes "); -- cgit v1.2.3 From 8ca8d15ade201b7723fa386eadcce2044463ff56 Mon Sep 17 00:00:00 2001 From: Jean-Hugues Deschenes Date: Thu, 21 Jan 2010 09:55:54 -0700 Subject: spi/dw_spi: Allow dw_spi.c to be a module Signed-off-by: Jean-Hugues Deschenes Signed-off-by: Grant Likely --- drivers/spi/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/spi') diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 201746ad825c..1d1e39686c38 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -325,7 +325,7 @@ config SPI_NUC900 # config SPI_DESIGNWARE - bool "DesignWare SPI controller core support" + tristate "DesignWare SPI controller core support" depends on SPI_MASTER help general driver for SPI controller core from DesignWare -- cgit v1.2.3 From 212b3c8b8ab94d983c2e0ee1821f17dd5b4e0859 Mon Sep 17 00:00:00 2001 From: Jean-Hugues Deschenes Date: Fri, 22 Jan 2010 10:08:31 -0700 Subject: spi/dw_spi: Fix dw_spi_mmio to depend on HAVE_CLK dw_spi_mmio is dependent on the clock framework. This marks it as such in Kconfig. Signed-off-by: Jean-Hugues Deschenes Signed-off-by: Grant Likely --- drivers/spi/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/spi') diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 1d1e39686c38..0fee95cd9a49 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -336,7 +336,7 @@ config SPI_DW_PCI config SPI_DW_MMIO tristate "Memory-mapped io interface driver for DW SPI core" - depends on SPI_DESIGNWARE + depends on SPI_DESIGNWARE && HAVE_CLK # # There are lots of SPI device types, with sensors and memory -- cgit v1.2.3 From fc05475f867624dddd5ea7089cf8f434f95fbec5 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 22 Jan 2010 13:53:30 +0100 Subject: ARM: 5893/1: SPI AMBA PL022: Limit TX FIFO fills Added logic to cap TX FIFO fill size based on current free RX FIFO entries instead of TX status flags. This is to prevent an issue with RX FIFO overflows. Signed-off-by: Kevin Wells Signed-off-by: Linus Walleij Signed-off-by: Russell King --- drivers/spi/amba-pl022.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c index ff5bbb9c43c9..9aeb68113100 100644 --- a/drivers/spi/amba-pl022.c +++ b/drivers/spi/amba-pl022.c @@ -363,6 +363,7 @@ struct pl022 { void *rx_end; enum ssp_reading read; enum ssp_writing write; + u32 exp_fifo_level; }; /** @@ -501,6 +502,9 @@ static int flush(struct pl022 *pl022) while (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE) readw(SSP_DR(pl022->virtbase)); } while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_BSY) && limit--); + + pl022->exp_fifo_level = 0; + return limit; } @@ -583,10 +587,9 @@ static void readwriter(struct pl022 *pl022) * errons in 8bit wide transfers on ARM variants (just 8 words * FIFO, means only 8x8 = 64 bits in FIFO) at least. * - * FIXME: currently we have no logic to account for this. - * perhaps there is even something broken in HW regarding - * 8bit transfers (it doesn't fail on 16bit) so this needs - * more investigation... + * To prevent this issue, the TX FIFO is only filled to the + * unused RX FIFO fill length, regardless of what the TX + * FIFO status flag indicates. */ dev_dbg(&pl022->adev->dev, "%s, rx: %p, rxend: %p, tx: %p, txend: %p\n", @@ -613,11 +616,12 @@ static void readwriter(struct pl022 *pl022) break; } pl022->rx += (pl022->cur_chip->n_bytes); + pl022->exp_fifo_level--; } /* - * Write as much as you can, while keeping an eye on the RX FIFO! + * Write as much as possible up to the RX FIFO size */ - while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_TNF) + while ((pl022->exp_fifo_level < pl022->vendor->fifodepth) && (pl022->tx < pl022->tx_end)) { switch (pl022->write) { case WRITING_NULL: @@ -634,6 +638,7 @@ static void readwriter(struct pl022 *pl022) break; } pl022->tx += (pl022->cur_chip->n_bytes); + pl022->exp_fifo_level++; /* * This inner reader takes care of things appearing in the RX * FIFO as we're transmitting. This will happen a lot since the @@ -660,6 +665,7 @@ static void readwriter(struct pl022 *pl022) break; } pl022->rx += (pl022->cur_chip->n_bytes); + pl022->exp_fifo_level--; } } /* -- cgit v1.2.3 From 8a349d4b13c41c00564cd79f6fabdec347084758 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 2 Feb 2010 07:22:13 +0000 Subject: spi/spi_s3c64xx.c: Fix continuation line formats String constants that are continued on subsequent lines with \ are not good. Signed-off-by: Joe Perches Signed-off-by: Grant Likely --- drivers/spi/spi_s3c64xx.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c index 32db69540fa9..97365815a729 100644 --- a/drivers/spi/spi_s3c64xx.c +++ b/drivers/spi/spi_s3c64xx.c @@ -634,8 +634,8 @@ static void handle_msg(struct s3c64xx_spi_driver_data *sdd, S3C64XX_SPI_DEACT(sdd); if (status) { - dev_err(&spi->dev, "I/O Error: \ - rx-%d tx-%d res:rx-%c tx-%c len-%d\n", + dev_err(&spi->dev, "I/O Error: " + "rx-%d tx-%d res:rx-%c tx-%c len-%d\n", xfer->rx_buf ? 1 : 0, xfer->tx_buf ? 1 : 0, (sdd->state & RXBUSY) ? 'f' : 'p', (sdd->state & TXBUSY) ? 'f' : 'p', @@ -1039,11 +1039,10 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) goto err8; } - dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d \ - with %d Slaves attached\n", + dev_dbg(&pdev->dev, "Samsung SoC SPI Driver loaded for Bus SPI-%d " + "with %d Slaves attached\n", pdev->id, master->num_chipselect); - dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\ - \tDMA=[Rx-%d, Tx-%d]\n", + dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\tDMA=[Rx-%d, Tx-%d]\n", mem_res->end, mem_res->start, sdd->rx_dmach, sdd->tx_dmach); -- cgit v1.2.3 From 4f4517c45f325ba511458465430a52864a5d0d30 Mon Sep 17 00:00:00 2001 From: Ernst Schwab Date: Tue, 16 Feb 2010 21:02:57 -0700 Subject: spi: Correct SPI clock frequency setting in spi_mpc8xxx Correct SPI clock frequency division factor rounding, preventing clock rates higher than the maximum specified clock frequency being used. When specifying spi-max-frequency = <10000000> in the device tree, the resulting frequency was 11.1 MHz, with spibrg being 133333332. According to the freescale data sheet [1], the spi clock rate is spiclk = spibrg / (4 * (pm+1)) The existing code calculated pm = mpc8xxx_spi->spibrg / (hz * 4); pm--; resulting in pm = (int) (3.3333) - 1 = 2, resulting in spiclk = 133333332/(4*(2+1)) = 11111111 With the fix, pm = (mpc8xxx_spi->spibrg - 1) / (hz * 4) + 1; pm--; resulting in pm = (int) (4.3333) - 1 = 3, resulting in spiclk = 133333332/(4*(3+1)) = 8333333 Without the fix, for every desired SPI frequency that is not exactly derivable from spibrg, pm will be too small due to rounding down, resulting in a too high SPI clock, so we need a pm which is one higher. For values that are exactly derivable, spibrg will be dividable by (hz*4) without remainder, and (int) ((spibrg-1)/(hz*4)) will be one lower than (int) (spibrg)/(hz*4), which is compensated by adding 1. For these values, the fixed version calculates the same pm as the unfixed version. For all values that are not exactly derivable, spibrg will be not dividable by (hz*4) without remainder, and (int) ((spibrg-1)/(hz*4)) will be the same as (int) (spibrg)/(hz*4), and the calculated pm will be one higher than calculated by the unfixed version. References: [1] http://www.freescale.com/files/32bit/doc/ref_manual/MPC8315ERM.pdf, page 22-10 -> 1398 Signed-off-by: Ernst Schwab Signed-off-by: Grant Likely --- drivers/spi/spi_mpc8xxx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi_mpc8xxx.c b/drivers/spi/spi_mpc8xxx.c index 08065fb15817..4f0cc9d457e0 100644 --- a/drivers/spi/spi_mpc8xxx.c +++ b/drivers/spi/spi_mpc8xxx.c @@ -365,7 +365,7 @@ int mpc8xxx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) if ((mpc8xxx_spi->spibrg / hz) > 64) { cs->hw_mode |= SPMODE_DIV16; - pm = mpc8xxx_spi->spibrg / (hz * 64); + pm = (mpc8xxx_spi->spibrg - 1) / (hz * 64) + 1; WARN_ONCE(pm > 16, "%s: Requested speed is too low: %d Hz. " "Will use %d Hz instead.\n", dev_name(&spi->dev), @@ -373,7 +373,7 @@ int mpc8xxx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) if (pm > 16) pm = 16; } else - pm = mpc8xxx_spi->spibrg / (hz * 4); + pm = (mpc8xxx_spi->spibrg - 1) / (hz * 4) + 1; if (pm) pm--; -- cgit v1.2.3 From ea071cc705e8bfba0c8bf84be8d4f9f4e9da6962 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Tue, 13 Oct 2009 20:22:34 +0200 Subject: MIPS: Alchemy: remove dbdma compat macros Remove dbdma compat macros, move remaining users over to default queueing functions and -flags. (Queueing function signature has changed in order to give a build failure instead of silent functional changes due to the no longer implicitly specified DDMA_FLAGS_IE flag) Signed-off-by: Manuel Lauss Signed-off-by: Ralf Baechle --- arch/mips/alchemy/common/dbdma.c | 9 ++++----- arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h | 23 ++--------------------- drivers/ide/au1xxx-ide.c | 21 +++++++++------------ drivers/mmc/host/au1xmmc.c | 4 ++-- drivers/spi/au1550_spi.c | 6 ++++-- sound/oss/au1550_ac97.c | 12 +++++++----- sound/soc/au1x/dbdma2.c | 8 ++++---- 7 files changed, 32 insertions(+), 51 deletions(-) (limited to 'drivers/spi') diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c index 549b18f3c18b..864b6dab6368 100644 --- a/arch/mips/alchemy/common/dbdma.c +++ b/arch/mips/alchemy/common/dbdma.c @@ -571,7 +571,7 @@ EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc); * This updates the source pointer and byte count. Normally used * for memory to fifo transfers. */ -u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags) +u32 au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags) { chan_tab_t *ctp; au1x_ddma_desc_t *dp; @@ -624,14 +624,13 @@ u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags) /* Return something non-zero. */ return nbytes; } -EXPORT_SYMBOL(_au1xxx_dbdma_put_source); +EXPORT_SYMBOL(au1xxx_dbdma_put_source); /* Put a destination buffer into the DMA ring. * This updates the destination pointer and byte count. Normally used * to place an empty buffer into the ring for fifo to memory transfers. */ -u32 -_au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags) +u32 au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags) { chan_tab_t *ctp; au1x_ddma_desc_t *dp; @@ -687,7 +686,7 @@ _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags) /* Return something non-zero. */ return nbytes; } -EXPORT_SYMBOL(_au1xxx_dbdma_put_dest); +EXPORT_SYMBOL(au1xxx_dbdma_put_dest); /* * Get a destination buffer into the DMA ring. diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h index d206000fbfe2..b417c3bcdcb9 100644 --- a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h +++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h @@ -339,8 +339,8 @@ u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits); u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries); /* Put buffers on source/destination descriptors. */ -u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags); -u32 _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags); +u32 au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags); +u32 au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags); /* Get a buffer from the destination descriptor. */ u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes); @@ -363,25 +363,6 @@ void au1xxx_dbdma_suspend(void); void au1xxx_dbdma_resume(void); #endif - -/* - * Some compatibilty macros -- needed to make changes to API - * without breaking existing drivers. - */ -#define au1xxx_dbdma_put_source(chanid, buf, nbytes) \ - _au1xxx_dbdma_put_source(chanid, buf, nbytes, DDMA_FLAGS_IE) -#define au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags) \ - _au1xxx_dbdma_put_source(chanid, buf, nbytes, flags) -#define put_source_flags(chanid, buf, nbytes, flags) \ - au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags) - -#define au1xxx_dbdma_put_dest(chanid, buf, nbytes) \ - _au1xxx_dbdma_put_dest(chanid, buf, nbytes, DDMA_FLAGS_IE) -#define au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags) \ - _au1xxx_dbdma_put_dest(chanid, buf, nbytes, flags) -#define put_dest_flags(chanid, buf, nbytes, flags) \ - au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags) - /* * Flags for the put_source/put_dest functions. */ diff --git a/drivers/ide/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c index 87cef0c440ad..377412e1d32b 100644 --- a/drivers/ide/au1xxx-ide.c +++ b/drivers/ide/au1xxx-ide.c @@ -56,8 +56,8 @@ static inline void auide_insw(unsigned long port, void *addr, u32 count) chan_tab_t *ctp; au1x_ddma_desc_t *dp; - if(!put_dest_flags(ahwif->rx_chan, (void*)addr, count << 1, - DDMA_FLAGS_NOIE)) { + if (!au1xxx_dbdma_put_dest(ahwif->rx_chan, (void*)addr, + count << 1, DDMA_FLAGS_NOIE)) { printk(KERN_ERR "%s failed %d\n", __func__, __LINE__); return; } @@ -74,8 +74,8 @@ static inline void auide_outsw(unsigned long port, void *addr, u32 count) chan_tab_t *ctp; au1x_ddma_desc_t *dp; - if(!put_source_flags(ahwif->tx_chan, (void*)addr, - count << 1, DDMA_FLAGS_NOIE)) { + if (!au1xxx_dbdma_put_source(ahwif->tx_chan, (void*)addr, + count << 1, DDMA_FLAGS_NOIE)) { printk(KERN_ERR "%s failed %d\n", __func__, __LINE__); return; } @@ -246,17 +246,14 @@ static int auide_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd) flags = DDMA_FLAGS_NOIE; if (iswrite) { - if(!put_source_flags(ahwif->tx_chan, - (void*) sg_virt(sg), - tc, flags)) { + if (!au1xxx_dbdma_put_source(ahwif->tx_chan, + (void *)sg_virt(sg), tc, flags)) { printk(KERN_ERR "%s failed %d\n", __func__, __LINE__); } - } else - { - if(!put_dest_flags(ahwif->rx_chan, - (void*) sg_virt(sg), - tc, flags)) { + } else { + if (!au1xxx_dbdma_put_dest(ahwif->rx_chan, + (void *)sg_virt(sg), tc, flags)) { printk(KERN_ERR "%s failed %d\n", __func__, __LINE__); } diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c index d3f55615c099..d295dc5e4f6b 100644 --- a/drivers/mmc/host/au1xmmc.c +++ b/drivers/mmc/host/au1xmmc.c @@ -650,10 +650,10 @@ static int au1xmmc_prepare_data(struct au1xmmc_host *host, flags = DDMA_FLAGS_IE; if (host->flags & HOST_F_XMIT) { - ret = au1xxx_dbdma_put_source_flags(channel, + ret = au1xxx_dbdma_put_source(channel, (void *)sg_virt(sg), len, flags); } else { - ret = au1xxx_dbdma_put_dest_flags(channel, + ret = au1xxx_dbdma_put_dest(channel, (void *)sg_virt(sg), len, flags); } diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c index cfd5ff9508fa..22f7d7294787 100644 --- a/drivers/spi/au1550_spi.c +++ b/drivers/spi/au1550_spi.c @@ -412,11 +412,13 @@ static int au1550_spi_dma_txrxb(struct spi_device *spi, struct spi_transfer *t) } /* put buffers on the ring */ - res = au1xxx_dbdma_put_dest(hw->dma_rx_ch, hw->rx, t->len); + res = au1xxx_dbdma_put_dest(hw->dma_rx_ch, hw->rx, + t->len, DDMA_FLAGS_IE); if (!res) dev_err(hw->dev, "rx dma put dest error\n"); - res = au1xxx_dbdma_put_source(hw->dma_tx_ch, (void *)hw->tx, t->len); + res = au1xxx_dbdma_put_source(hw->dma_tx_ch, (void *)hw->tx, + t->len, DDMA_FLAGS_IE); if (!res) dev_err(hw->dev, "tx dma put source error\n"); diff --git a/sound/oss/au1550_ac97.c b/sound/oss/au1550_ac97.c index 4191acccbcdb..b9ff0b798032 100644 --- a/sound/oss/au1550_ac97.c +++ b/sound/oss/au1550_ac97.c @@ -614,7 +614,8 @@ start_adc(struct au1550_state *s) /* Put two buffers on the ring to get things started. */ for (i=0; i<2; i++) { - au1xxx_dbdma_put_dest(db->dmanr, db->nextIn, db->dma_fragsize); + au1xxx_dbdma_put_dest(db->dmanr, db->nextIn, + db->dma_fragsize, DDMA_FLAGS_IE); db->nextIn += db->dma_fragsize; if (db->nextIn >= db->rawbuf + db->dmasize) @@ -733,7 +734,7 @@ static void dac_dma_interrupt(int irq, void *dev_id) if (db->count >= db->fragsize) { if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut, - db->fragsize) == 0) { + db->fragsize, DDMA_FLAGS_IE) == 0) { err("qcount < 2 and no ring room!"); } db->nextOut += db->fragsize; @@ -777,7 +778,8 @@ static void adc_dma_interrupt(int irq, void *dev_id) /* Put a new empty buffer on the destination DMA. */ - au1xxx_dbdma_put_dest(dp->dmanr, dp->nextIn, dp->dma_fragsize); + au1xxx_dbdma_put_dest(dp->dmanr, dp->nextIn, + dp->dma_fragsize, DDMA_FLAGS_IE); dp->nextIn += dp->dma_fragsize; if (dp->nextIn >= dp->rawbuf + dp->dmasize) @@ -1177,8 +1179,8 @@ au1550_write(struct file *file, const char *buffer, size_t count, loff_t * ppos) * we know the dma has stopped. */ while ((db->dma_qcount < 2) && (db->count >= db->fragsize)) { - if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut, - db->fragsize) == 0) { + if (au1xxx_dbdma_put_source(db->dmanr, + db->nextOut, db->fragsize, DDMA_FLAGS_IE) == 0) { err("qcount < 2 and no ring room!"); } db->nextOut += db->fragsize; diff --git a/sound/soc/au1x/dbdma2.c b/sound/soc/au1x/dbdma2.c index 19e4d37eba1c..2929f1c42264 100644 --- a/sound/soc/au1x/dbdma2.c +++ b/sound/soc/au1x/dbdma2.c @@ -94,7 +94,7 @@ static const struct snd_pcm_hardware au1xpsc_pcm_hardware = { static void au1x_pcm_queue_tx(struct au1xpsc_audio_dmadata *cd) { - au1xxx_dbdma_put_source_flags(cd->ddma_chan, + au1xxx_dbdma_put_source(cd->ddma_chan, (void *)phys_to_virt(cd->dma_area), cd->period_bytes, DDMA_FLAGS_IE); @@ -109,9 +109,9 @@ static void au1x_pcm_queue_tx(struct au1xpsc_audio_dmadata *cd) static void au1x_pcm_queue_rx(struct au1xpsc_audio_dmadata *cd) { - au1xxx_dbdma_put_dest_flags(cd->ddma_chan, - (void *)phys_to_virt(cd->dma_area), - cd->period_bytes, DDMA_FLAGS_IE); + au1xxx_dbdma_put_dest(cd->ddma_chan, + (void *)phys_to_virt(cd->dma_area), + cd->period_bytes, DDMA_FLAGS_IE); /* update next-to-queue period */ ++cd->q_period; -- cgit v1.2.3 From 963accbc82a0912b39de39d59e2fd6741db3aa4b Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Tue, 13 Oct 2009 20:22:35 +0200 Subject: MIPS: Alchemy: change dbdma to accept physical memory addresses DMA can only be done from physical addresses; move the "virt_to_phys" source/destination buffer address translation from the dbdma queueing functions (since the hardware can only DMA to/from physical addresses) to their respective users. Signed-off-by: Manuel Lauss Signed-off-by: Ralf Baechle --- arch/mips/alchemy/common/dbdma.c | 8 ++++---- arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h | 4 ++-- drivers/ide/au1xxx-ide.c | 8 ++++---- drivers/mmc/host/au1xmmc.c | 4 ++-- drivers/spi/au1550_spi.c | 4 ++-- sound/oss/au1550_ac97.c | 12 +++++++----- sound/soc/au1x/dbdma2.c | 12 +++++------- 7 files changed, 26 insertions(+), 26 deletions(-) (limited to 'drivers/spi') diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c index 864b6dab6368..3b2ccc05e20b 100644 --- a/arch/mips/alchemy/common/dbdma.c +++ b/arch/mips/alchemy/common/dbdma.c @@ -571,7 +571,7 @@ EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc); * This updates the source pointer and byte count. Normally used * for memory to fifo transfers. */ -u32 au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags) +u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags) { chan_tab_t *ctp; au1x_ddma_desc_t *dp; @@ -597,7 +597,7 @@ u32 au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags) return 0; /* Load up buffer address and byte count. */ - dp->dscr_source0 = virt_to_phys(buf); + dp->dscr_source0 = buf & ~0UL; dp->dscr_cmd1 = nbytes; /* Check flags */ if (flags & DDMA_FLAGS_IE) @@ -630,7 +630,7 @@ EXPORT_SYMBOL(au1xxx_dbdma_put_source); * This updates the destination pointer and byte count. Normally used * to place an empty buffer into the ring for fifo to memory transfers. */ -u32 au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags) +u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags) { chan_tab_t *ctp; au1x_ddma_desc_t *dp; @@ -660,7 +660,7 @@ u32 au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags) if (flags & DDMA_FLAGS_NOIE) dp->dscr_cmd0 &= ~DSCR_CMD0_IE; - dp->dscr_dest0 = virt_to_phys(buf); + dp->dscr_dest0 = buf & ~0UL; dp->dscr_cmd1 = nbytes; #if 0 printk(KERN_DEBUG "cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n", diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h index b417c3bcdcb9..8c6b1105ce0b 100644 --- a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h +++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h @@ -339,8 +339,8 @@ u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits); u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries); /* Put buffers on source/destination descriptors. */ -u32 au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags); -u32 au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags); +u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags); +u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags); /* Get a buffer from the destination descriptor. */ u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes); diff --git a/drivers/ide/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c index 377412e1d32b..349a67bf1a36 100644 --- a/drivers/ide/au1xxx-ide.c +++ b/drivers/ide/au1xxx-ide.c @@ -56,7 +56,7 @@ static inline void auide_insw(unsigned long port, void *addr, u32 count) chan_tab_t *ctp; au1x_ddma_desc_t *dp; - if (!au1xxx_dbdma_put_dest(ahwif->rx_chan, (void*)addr, + if (!au1xxx_dbdma_put_dest(ahwif->rx_chan, virt_to_phys(addr), count << 1, DDMA_FLAGS_NOIE)) { printk(KERN_ERR "%s failed %d\n", __func__, __LINE__); return; @@ -74,7 +74,7 @@ static inline void auide_outsw(unsigned long port, void *addr, u32 count) chan_tab_t *ctp; au1x_ddma_desc_t *dp; - if (!au1xxx_dbdma_put_source(ahwif->tx_chan, (void*)addr, + if (!au1xxx_dbdma_put_source(ahwif->tx_chan, virt_to_phys(addr), count << 1, DDMA_FLAGS_NOIE)) { printk(KERN_ERR "%s failed %d\n", __func__, __LINE__); return; @@ -247,13 +247,13 @@ static int auide_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd) if (iswrite) { if (!au1xxx_dbdma_put_source(ahwif->tx_chan, - (void *)sg_virt(sg), tc, flags)) { + sg_phys(sg), tc, flags)) { printk(KERN_ERR "%s failed %d\n", __func__, __LINE__); } } else { if (!au1xxx_dbdma_put_dest(ahwif->rx_chan, - (void *)sg_virt(sg), tc, flags)) { + sg_phys(sg), tc, flags)) { printk(KERN_ERR "%s failed %d\n", __func__, __LINE__); } diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c index d295dc5e4f6b..c8649dfb2d0c 100644 --- a/drivers/mmc/host/au1xmmc.c +++ b/drivers/mmc/host/au1xmmc.c @@ -651,10 +651,10 @@ static int au1xmmc_prepare_data(struct au1xmmc_host *host, if (host->flags & HOST_F_XMIT) { ret = au1xxx_dbdma_put_source(channel, - (void *)sg_virt(sg), len, flags); + sg_phys(sg), len, flags); } else { ret = au1xxx_dbdma_put_dest(channel, - (void *)sg_virt(sg), len, flags); + sg_phys(sg), len, flags); } if (!ret) diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c index 22f7d7294787..ba8ac4f599d3 100644 --- a/drivers/spi/au1550_spi.c +++ b/drivers/spi/au1550_spi.c @@ -412,12 +412,12 @@ static int au1550_spi_dma_txrxb(struct spi_device *spi, struct spi_transfer *t) } /* put buffers on the ring */ - res = au1xxx_dbdma_put_dest(hw->dma_rx_ch, hw->rx, + res = au1xxx_dbdma_put_dest(hw->dma_rx_ch, virt_to_phys(hw->rx), t->len, DDMA_FLAGS_IE); if (!res) dev_err(hw->dev, "rx dma put dest error\n"); - res = au1xxx_dbdma_put_source(hw->dma_tx_ch, (void *)hw->tx, + res = au1xxx_dbdma_put_source(hw->dma_tx_ch, virt_to_phys(hw->tx), t->len, DDMA_FLAGS_IE); if (!res) dev_err(hw->dev, "tx dma put source error\n"); diff --git a/sound/oss/au1550_ac97.c b/sound/oss/au1550_ac97.c index b9ff0b798032..c1070e33b32f 100644 --- a/sound/oss/au1550_ac97.c +++ b/sound/oss/au1550_ac97.c @@ -614,7 +614,7 @@ start_adc(struct au1550_state *s) /* Put two buffers on the ring to get things started. */ for (i=0; i<2; i++) { - au1xxx_dbdma_put_dest(db->dmanr, db->nextIn, + au1xxx_dbdma_put_dest(db->dmanr, virt_to_phys(db->nextIn), db->dma_fragsize, DDMA_FLAGS_IE); db->nextIn += db->dma_fragsize; @@ -733,8 +733,9 @@ static void dac_dma_interrupt(int irq, void *dev_id) db->dma_qcount--; if (db->count >= db->fragsize) { - if (au1xxx_dbdma_put_source(db->dmanr, db->nextOut, - db->fragsize, DDMA_FLAGS_IE) == 0) { + if (au1xxx_dbdma_put_source(db->dmanr, + virt_to_phys(db->nextOut), db->fragsize, + DDMA_FLAGS_IE) == 0) { err("qcount < 2 and no ring room!"); } db->nextOut += db->fragsize; @@ -778,7 +779,7 @@ static void adc_dma_interrupt(int irq, void *dev_id) /* Put a new empty buffer on the destination DMA. */ - au1xxx_dbdma_put_dest(dp->dmanr, dp->nextIn, + au1xxx_dbdma_put_dest(dp->dmanr, virt_to_phys(dp->nextIn), dp->dma_fragsize, DDMA_FLAGS_IE); dp->nextIn += dp->dma_fragsize; @@ -1180,7 +1181,8 @@ au1550_write(struct file *file, const char *buffer, size_t count, loff_t * ppos) */ while ((db->dma_qcount < 2) && (db->count >= db->fragsize)) { if (au1xxx_dbdma_put_source(db->dmanr, - db->nextOut, db->fragsize, DDMA_FLAGS_IE) == 0) { + virt_to_phys(db->nextOut), db->fragsize, + DDMA_FLAGS_IE) == 0) { err("qcount < 2 and no ring room!"); } db->nextOut += db->fragsize; diff --git a/sound/soc/au1x/dbdma2.c b/sound/soc/au1x/dbdma2.c index 2929f1c42264..6d9f4c624949 100644 --- a/sound/soc/au1x/dbdma2.c +++ b/sound/soc/au1x/dbdma2.c @@ -51,8 +51,8 @@ struct au1xpsc_audio_dmadata { struct snd_pcm_substream *substream; unsigned long curr_period; /* current segment DDMA is working on */ unsigned long q_period; /* queue period(s) */ - unsigned long dma_area; /* address of queued DMA area */ - unsigned long dma_area_s; /* start address of DMA area */ + dma_addr_t dma_area; /* address of queued DMA area */ + dma_addr_t dma_area_s; /* start address of DMA area */ unsigned long pos; /* current byte position being played */ unsigned long periods; /* number of SG segments in total */ unsigned long period_bytes; /* size in bytes of one SG segment */ @@ -94,8 +94,7 @@ static const struct snd_pcm_hardware au1xpsc_pcm_hardware = { static void au1x_pcm_queue_tx(struct au1xpsc_audio_dmadata *cd) { - au1xxx_dbdma_put_source(cd->ddma_chan, - (void *)phys_to_virt(cd->dma_area), + au1xxx_dbdma_put_source(cd->ddma_chan, cd->dma_area, cd->period_bytes, DDMA_FLAGS_IE); /* update next-to-queue period */ @@ -109,8 +108,7 @@ static void au1x_pcm_queue_tx(struct au1xpsc_audio_dmadata *cd) static void au1x_pcm_queue_rx(struct au1xpsc_audio_dmadata *cd) { - au1xxx_dbdma_put_dest(cd->ddma_chan, - (void *)phys_to_virt(cd->dma_area), + au1xxx_dbdma_put_dest(cd->ddma_chan, cd->dma_area, cd->period_bytes, DDMA_FLAGS_IE); /* update next-to-queue period */ @@ -233,7 +231,7 @@ static int au1xpsc_pcm_hw_params(struct snd_pcm_substream *substream, pcd->substream = substream; pcd->period_bytes = params_period_bytes(params); pcd->periods = params_periods(params); - pcd->dma_area_s = pcd->dma_area = (unsigned long)runtime->dma_addr; + pcd->dma_area_s = pcd->dma_area = runtime->dma_addr; pcd->q_period = 0; pcd->curr_period = 0; pcd->pos = 0; -- cgit v1.2.3