summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)AuthorFilesLines
2006-03-22[ALSA] Fix NM256 hard lock upFlorian Schlichting1-24/+96
Modules: NM256 driver Treat the nm256 mixer as a write-only device so as to avoid hangs on initialisation. Signed-off-by: Florian Schlichting <Florian.Schlichting@gmx.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] ac97 - Allow drivers to set static volume resolution tableTakashi Iwai1-0/+1
Modules: AC97 Codec Add the pointer to a static volume resolution table to ac97 template, so that the drivers can define the volume resolution, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] usb-audio: add MDP-5/EZ-J24 supportClemens Ladisch1-0/+2
Modules: USB generic driver Add support for the Yamaha MDP-5 and EZ-J24. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22[ALSA] Fixes audiophile usb analog capture with the new device_setup parameterThibault LE MEUR1-1/+51
Modules: Documentation,USB generic driver The patch adds the 'device_setup' module parameter and a specific quirk to correctly initialize the audiophile usb device: this fixes the distorted sound bug on the Analog capture port. Backward compatibility is achieved by simply omitting the new parameter. Signed-off-by: Thibault LE MEUR <Thibault.LeMeur@supelec.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] sound/pci/ice1712/delta.c: make 2 functions staticAdrian Bunk1-2/+2
Modules: ICE1712 driver This patch makes two needlessly global functions static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] fix some memory leaksAdrian Bunk3-3/+9
Modules: Generic drivers,ES18xx driver,CS46xx driver This patch fixes two memory leaks spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] usb-audio: add error message about missing split iso supportClemens Ladisch1-0/+4
Modules: USB generic driver Add an error message for -ENOSYS for situations when split iso support is needed but not enabled. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22[ALSA] hda-codec - Fix Aopen i915GMm-HFS moboTakashi Iwai1-0/+2
Modules: HDA Codec driver Add a model entry for Aopen i915GMm-HFS mobo with ALC880 codec. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] sound/pci/rme9652/hdspm.c: fix off-by-one errorsAdrian Bunk1-2/+2
Modules: RME9652 driver This patch fixes off-by-one errors found by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] sound/core/: fix 3 off-by-one errorsAdrian Bunk2-3/+3
Modules: ALSA Core This patch fixes three off-by-one errors found by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] make control.c suspend awareGiuliano Pochini2-11/+42
Modules: Control Midlevel This patch prevents user-space apps from accessing the hardware via control interface while the soundcard is suspended. Signed-off-by: Giuliano Pochini <pochini@shiny.it> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] hda-codec - Fix support of laptops with AD1986A codecTakashi Iwai1-0/+131
Modules: Documentation,HDA Codec driver Fix the support of laptops with AD1986A HD-audio codec. Added new models '3stack' and 'laptop'. Currently, fixed for FSC V2060 and Samsung M50. Also fixed the description of missing models in ALSA-Configuration.txt. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] bt87x: add more DVB card IDsClemens Ladisch1-0/+3
Modules: BT87x driver Add more PCI subsystem IDs of DVB cards to the blacklist of cards the driver is to ignore. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22[ALSA] usb-audio: change Casio quirk product nameClemens Ladisch1-1/+2
Modules: USB generic driver Use a generic name for USB device 0x07cf:0x6802 because this ID is used by several devices without a product ID. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22[ALSA] usb-audio: show USB error descriptionsClemens Ladisch1-4/+35
Modules: USB generic driver When usb_submit_urb() fails, show an error description instead of just the error code. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22[ALSA] usb-audio: add Casio AP-80R supportClemens Ladisch1-0/+11
Modules: USB generic driver Add a quirk for the Casio AP-80R. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22[ALSA] Add default entry for CTL Travel Master U553WTakashi Iwai1-0/+2
Modules: HDA Codec driver Added the default entry of ALC880 configuration table for CTL Travel Master U553W. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] Fix use after free in opl3_seq and opl3_ossDave Jones2-8/+16
Modules: OPL3 Don't read from free'd memory. Also make use of the return value, and don't register the device if something went wrong creating the port. Coverity #954, #955 Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] ad1848 double freeDave Jones1-3/+1
Modules: AD1848 driver Same again, snd_ctl_add() already kfree's on error. Coverity #956 Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] sound/isa/sb/sb_mixer.c double kfreeDave Jones1-3/+1
Modules: SB drivers snd_ctl_add() already does the free on error. Coverity bug #957 Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] emu10k1_synth use after freeDave Jones1-1/+0
Modules: EMU10K1/EMU10K2 driver Thou shalt not dereference freed memory. Coverity bug #958 Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] fix usbmixer double kfreeDave Jones1-1/+0
Modules: USB generic driver snd_ctl_add() kfree's the kcontrol already if we fail there, so this driver is currently doing a double kfree. Coverity bug #959 Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] emu10k1 - Add the entry for Audigy4 SB0400Takashi Iwai1-0/+8
Modules: EMU10K1/EMU10K2 driver Added the missing card entry for Audigy4 SB0400 model. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] vx - Fix memory leak on error pathAlexey Dobriyan1-1/+5
Modules: Digigram VX core Noticed by Eric Sesterhenn on kernel-janitors@ Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] CS5535: shorter delays when accessing AC'97 codec registersDavid Vrabel1-3/+3
Modules: CS5535 driver The 10 ms sleeps while waiting for AC'97 codec register reads/writes to complete are excessive given the maxmium time is one AC'97 frame (~21 us). With AC'97 codecs with integrated touchscreens (like the UCB1400) this improves the interactive performance of the touchscreen. Signed-off-by: David Vrabel <dvrabel@arcom.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] hda-codec - Add lg model for LG laptopTakashi Iwai1-28/+192
Modules: Documentation,HDA Codec driver Added a new model 'lg' for LG laptop (m1 express dual) with ALC880 codec. Also clean up the initialization/unsol_event hooks in patch_realtek.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] return ENODEV for disconnected devicesClemens Ladisch1-0/+42
Modules: ALSA Core Add dummy functions that return -ENODEV for the struct file_operations of a disconnected device. Without such functions, userspace would get ENOTTY. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22[ALSA] Fix missing AD1986a capsrcTakashi Iwai1-1/+1
Modules: HDA Codec driver Fix missing AD1986a capsrc setting in the last patch. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] hda-codec - Fix AD198x recording and add HP modelTakashi Iwai1-44/+255
Modules: HDA Codec driver - Fixed recording of AD1981HD/AD1983/AD1986A - Added model 'hp' to AD1981HD for HP nx6320 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] via82xx - Add dxs entry for ASRock moboTakashi Iwai1-0/+1
Modules: VIA82xx driver Add dxs_support entry for ASRock mobo. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] hda-codec - Fix ALC262 for Fujitsu laptopTakashi Iwai3-15/+155
Modules: HDA Codec driver,HDA generic driver Add 'fujitsu' model for ALC262 patch to support a FSC laptop. The internal speaker is turned on/off with jack sensing. Also fixed alc262 'basic' model. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] ice1712 - Fix wordclock status on Delta1010LTDoug McLain1-1/+1
Modules: ICE1712 driver I posted this patch to bug 1806 a while back, and have been awaiting a reply or commit. It currently reports the Locked/No Signal text backwards in envy24control, since i was using an older version of envy24control when I wrote the original code. The Locked/No Signal test was recently reversed in envy24control cvs, so the test in my code needs to be reversed as well. Here is the patch, once again. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] HDA/ALC260: 7/7 - add SPDIF enable to test modelJonathan Woithe1-1/+67
Modules: HDA Codec driver This patch adds mixer controls to the 'test' ALC260 model which allow the user to selectively enable or disable the SPDIF output pins. This should assist people identify digital outputs on machines which bring them to the outside world. Note that while the patch *should* work, I cannot personally verify it since my laptop doesn't bring the SPDIF lines out. As for the GPIO switches added in patch 4, these controls are currently only compiled in if debug mode is selected. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] HDA/ALC260: 6/7 - Fujitsu/test model tweaksJonathan Woithe1-54/+54
Modules: HDA Codec driver This patch is janitorial - it cleans up a number of cosmetic issues with the 'fujitsu' and 'test' models. Issues addressed: * spaces instead of tabs used for some indents, * clarified/corrected selected comments. Unlike a patch from earlier this week, this keeps both ADCs connected to the mic1 pin widget by default. I believe this is the better default, since some laptops don't bring the line1 widget to the outside world. Most (if not all) do bring mic1 out though, so it seems to me that this default should remain in place. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] HDA/ALC260: 5/7 - add 'acer' modelJonathan Woithe1-0/+129
Modules: HDA Codec driver This patch adds a new 'acer' model. It is based on work by Rimas and many other dedicated Acer owners over the past few weeks (see bug number 1618) - kudos to them. This adds support for a variety of Acer laptops, although we are still in the process of collecting pci/subsystem IDs to add. There are still some potentially outstanding issues: there are reports that the CD control might not yet be functional for example. However, the time is probably right to get a 'first cut' into the kernel which can be refined as more test reports come in. From the reports by various Acer owners, this code allows them to record from internal mics and external jacks. Playback also seems to work to all external jacks and the internal speaker. The 'beep' control doesn't appear functional at the moment. This patch depends on the changes made in patch 3/7. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] HDA/ALC260: 4/7 - add GPIO switches to test modelJonathan Woithe1-2/+64
Modules: HDA Codec driver This patch adds 'test' model mixer switches for the GPIO controls found on the ALC260. It has been found that some laptops (eg: Acer) can use these to enable particular controls, so it would be useful to have access to these via the 'test' model. It will make testing new models easy, especially if certain outputs cannot be made to work any other way. This patch *should* work, but because the GPIO pins don't do anything in my laptop I cannot personally verify that all this works as expected. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] HDA/ALC260: 3/7 - generalise some structuresJonathan Woithe1-3/+6
Modules: HDA Codec driver This patch generalises a structure added for the 'fujitsu' model but which is potentially useful for other models as well. It turns the 'alc260_fujitsu_adc_nids' array into 'alc260_dual_adc_nids'; for other models which decide to utilise the dual ADC functionality there's really no reason why they need to define their own list of ADC nids. The 'fujitsu' model preset is adjusted accordingly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] HDA/ALC260: 2/7 - switch pin buffer enablesJonathan Woithe1-20/+38
Modules: HDA Codec driver This patch adds functionality which switches the input/output buffer enables of retasking pins when the user changes their mode with the mode control. This probably reduces noise *slightly* for recording compared to the case where both input and output buffers were enabled simultaneously. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] HDA/ALC260: 1/7 - Fix test model input mux labelJonathan Woithe1-5/+15
Modules: HDA Codec driver This patch fixes input mux labels used for the ALC260 'test' model. This is needed to avoid confusion which comes about because the two ADCs in the ALC260 have slightly different mappings for their input selectors. Since this is just the test model it's sufficient to simply report both options where they exist. If a model comes along for which this becomes an issue, the ALC260 input mux code will have to be extended to allow different mux layouts for different ADCs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] Don't NULL check vfree argument in pdaudiocf_pcm.cJesper Juhl1-4/+3
Modules: PDAudioCF driver Don't check pointers passed to vfree for null in pdaudiocf_pcm.c Signed-off-by: Jesper Juhl <Jesper.Juhl@Gmail.Com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] opti9x - Fix compile without CONFIG_PNPTakashi Iwai1-0/+6
Modules: Opti9xx drivers Fix compile errors without CONFIG_PNP. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] cs4236 - Fix a typoTakashi Iwai1-1/+1
Modules: CS4236+ driver Fixed a typo in snd_cs4236_put_master_digital(), resulting in silence right channel. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] usb-audio: optimize snd_usbmidi_count_bits()Clemens Ladisch1-3/+3
Modules: USB generic driver Reduce the code size of the snd_usbmidi_count_bits() function by using simpler operations. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-03-22[ALSA] Fix sleep in atomic in virmidi driverTakashi Iwai1-2/+2
Modules: ALSA sequencer Debug: sleeping function called from invalid context at /usr/src/linux/include/linux/rwsem.h:43 in_atomic():1, irqs_disabled():0 [<f999d15e>] snd_seq_deliver_event+0xb4/0x1a8 [snd_seq] [<f999d2be>] snd_seq_kernel_client_dispatch+0x6c/0x7c [snd_seq] [<f93321fc>] snd_virmidi_output_trigger+0xca/0xe5 [snd_seq_virmidi] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] pcm - Move PAUSE ioctl to common ioctl handlerTakashi Iwai1-8/+8
Modules: PCM Midlevel Moved PAUSE ioctl to the common ioctl handler. A capture stream may issue PAUSE, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] Fix check of enable module optionTakashi Iwai18-21/+51
Fix the check of enable module option in probe of platform_device drivers. It shouldn't break the loop but just ignore if enable[i] is false. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] hda-intel - Auto-correction of the DMA position modeTakashi Iwai1-7/+15
Modules: HDA Intel driver Switch the method to measure the current DMA position automatically from position-buffer mode to LPIB-read mode with a sanity check. Some hardwares seems to have problem with the position buffer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] hda-intel - Automatic correction to single_cmd modeTakashi Iwai2-17/+49
Modules: HDA Codec driver,HDA Intel driver Switch to single_cmd mode automatically as a fallback when CORB/RIRB communication doesn't work well. It may make the driver working on some devices with broken BIOS/ACPI support. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] hda-codec - Add missing model entries for Intel 945 boardsTakashi Iwai1-0/+6
Modules: HDA Codec driver Added the missing entries for Intel 945 boards. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22[ALSA] intel8x0 - wait for ICH_RESETREGSJaroslav Kysela1-1/+10
Modules: Intel8x0 driver It seems that hardware requires some time to reset bus master registers. We need to wait until ICH_RESETREGS bit is not released. The suggestion and symptom was described by Mike Gorchak <lestat@i.com.ua>. Signed-off-by: Jaroslav Kysela <perex@suse.cz>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 00:10:29 +0000