summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2008-07-15Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds4-15/+70
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (56 commits) i2c: Add detection capability to new-style drivers i2c: Call client_unregister for new-style devices too i2c: Clean up old chip drivers i2c-ibm_iic: Register child nodes i2c: New-style EEPROM driver using device IDs i2c: Export the i2c_bus_type symbol i2c-au1550: Fix PM support i2c-dev: Delete empty detach_client callback i2c: Drop stray references to lm_sensors i2c: Check for ACPI resource conflicts i2c-ocores: basic PM support i2c-sibyte: SWARM I2C board initialization i2c-i801: Fix handling of error conditions i2c-i801: Rename local variable temp to status i2c-i801: Properly report bus arbitration loss i2c-i801: Remove verbose debugging messages i2c-algo-pcf: Drop unused struct members i2c-algo-pcf: Multi-master lost-arbitration improvement i2c: Deprecate the legacy gpio drivers i2c-pxa: Initialize early ...
2008-07-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds2-32/+24
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (80 commits) ide-floppy: fix unfortunate function naming ide-tape: unify idetape_create_read/write_cmd ide: add ide_pc_intr() helper ide-{floppy,scsi}: read Status Register before stopping DMA engine ide-scsi: add more debugging to idescsi_pc_intr() ide-scsi: use pc->callback ide-floppy: add more debugging to idefloppy_pc_intr() ide-tape: always log debug info in idetape_pc_intr() if debugging is enabled ide-tape: add ide_tape_io_buffers() helper ide-tape: factor out DSC handling from idetape_pc_intr() ide-{floppy,tape}: move checking of ->failed_pc to ->callback ide: add ide_issue_pc() helper ide: add PC_FLAG_DRQ_INTERRUPT pc flag ide-scsi: move idescsi_map_sg() call out from idescsi_issue_pc() ide: add ide_transfer_pc() helper ide-scsi: set drive->scsi flag for devices handled by the driver ide-{cd,floppy,tape}: remove checking for drive->scsi ide: add PC_FLAG_ZIP_DRIVE pc flag ide-tape: factor out waiting for good ireason from idetape_transfer_pc() ide-tape: set PC_FLAG_DMA_IN_PROGRESS flag in idetape_transfer_pc() ...
2008-07-15ide: add ide_pc_intr() helperBartlomiej Zolnierkiewicz1-0/+6
* ide-tape.c: add 'drive' argument to idetape_update_buffers(). * Add generic ide_pc_intr() helper to ide-atapi.c and then convert ide-{floppy,tape,scsi} device drivers to use it. * ide-tape.c: remove no longer needed DBG_PC_INTR. There should be no functional changes caused by this patch (unless the debugging is explicitely compiled in). Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: add ide_issue_pc() helperBartlomiej Zolnierkiewicz1-0/+2
Add generic ide_issue_pc() helper to ide-atapi.c and then convert ide-{floppy,tape,scsi} device drivers to use it. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: add PC_FLAG_DRQ_INTERRUPT pc flagBartlomiej Zolnierkiewicz1-0/+1
Add PC_FLAG_DRQ_INTERRUPT pc flag, set it in ide*_do_request() and check for it (instead of checking for IDE*_FLAG_DRQ_INTERRUPT) in ide*_issue_pc(). This is a preparation for adding generic ide_issue_pc() helper. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: add ide_transfer_pc() helperBartlomiej Zolnierkiewicz1-0/+3
* Add ide-atapi.c file for generic ATAPI support together with CONFIG_IDE_ATAPI config option. * Add generic ide_transfer_pc() helper to ide-atapi.c and then convert ide-{floppy,tape,scsi} device drivers to use it. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: add PC_FLAG_ZIP_DRIVE pc flagBartlomiej Zolnierkiewicz1-0/+1
Add PC_FLAG_ZIP_DRIVE pc flag, set it in idefloppy_do_request() and check for it (instead of checking for IDEFLOPPY_FLAG_ZIP_DRIVE) in idefloppy_transfer_pc(). This is a preparation for adding generic ide_transfer_pc() helper. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-{floppy,tape}: PC_FLAG_DMA_RECOMMENDED -> PC_FLAG_DMA_OKBartlomiej Zolnierkiewicz1-5/+4
* Use PC_FLAG_DMA_OK flag instead of PC_FLAG_DMA_RECOMMENDED one. * Remove no longer used PC_FLAG_DMA_RECOMMENDED flag. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-{floppy,tape}: merge pc->idefloppy_callback and pc->idetape_callbackBartlomiej Zolnierkiewicz1-2/+2
Merge pc->idefloppy_callback and pc->idetape_callback into pc->callback. There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide-tape: make pc->idetape_callback voidBartlomiej Zolnierkiewicz1-1/+1
There should be no functional changes caused by this patch. Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: remove action argument in ide_do_drive_cmdFUJITA Tomonori1-11/+1
ide_do_drive_cmd is called only with ide_preempt action argument. So we can remove the action argument in ide_do_drive_cmd and ide_action_t typedef. This patch also includes two minor cleanups: 1) ide_do_drive_cmd always succeeds so we don't need the return value; 2) the callers use blk_rq_init before ide_do_drive_cmd so there is no need to initialize rq->errors. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: remove drive->ctlBartlomiej Zolnierkiewicz1-2/+1
Remove drive->ctl (it is always equal to 0x08 after init time). While at it: * Use ATA_DEVCTL_OBS define. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: use ->OUTBSYNC in ide_set_irq()Bartlomiej Zolnierkiewicz1-1/+2
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: pass 'hwif *' instead of 'drive *' to ->OUTBSYNC methodBartlomiej Zolnierkiewicz1-1/+1
There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: remove ->mmio flag from ide_hwif_tBartlomiej Zolnierkiewicz1-1/+0
Since scc_pata host driver no longer uses IDE PCI layer / ide_dma_setup() and all other ->mmio users set also IDE_HFLAG_MMIO host flag we can safely remove ->mmio flag. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: move IRQ unmasking out from ->tf_load methodBartlomiej Zolnierkiewicz1-0/+1
Move IRQ unmasking out from ->tf_load method to its users. There should be no functional changes caused by this patch (SELECT_MASK() is NOP except for hpt366, icside and sgiioc4). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: remove IDE_TFLAG_NO_SELECT_MASK taskfile flagBartlomiej Zolnierkiewicz1-1/+0
Always call SELECT_MASK(..., 0) in ide_tf_load() (needs to be done to match ide_set_irq(..., 1)) and then remove IDE_TFLAG_NO_SELECT_MASK taskfile flag. This change should only affect hpt366 and icside host drivers since ->maskproc(..., 0) for sgiioc4 is equivalent to ide_set_irq(..., 1). Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: remove obsoleted "ide=" kernel parametersBartlomiej Zolnierkiewicz1-4/+0
* Remove obsoleted "ide=" kernel parameters. * Remove no longer needed: - ide_setup() - parse_options() - __setup("", ...) - module_param(options, ...) * Use module_{init,exit}() for MODULE=y case and remove MODULE ifdef. * Make ide_*acpi* and ide_doubler variables static. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: remove obsoleted "idebus=" kernel parameterBartlomiej Zolnierkiewicz1-2/+0
* Remove obsoleted "idebus=" kernel parameter. * Remove no longer needed ide_system_bus_speed() and system_bus_clock() (together with idebus_parameter and system_bus_speed variables). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15block: unexport blk_end_sync_rqFUJITA Tomonori1-1/+0
All the users of blk_end_sync_rq has gone (they are converted to use blk_execute_rq). This unexports blk_end_sync_rq. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15ide: remove ide_init_drive_cmdFUJITA Tomonori1-2/+0
ide_init_drive_cmd just calls blk_rq_init. This converts the users of ide_init_drive_cmd to use blk_rq_init directly and removes ide_init_drive_cmd. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Borislav Petkov <petkovbb@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-15Merge branch 'genirq' of ↵Linus Torvalds2-9/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'genirq' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: remove extraneous checks in manage.c genirq: Expose default irq affinity mask (take 3)
2008-07-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmwLinus Torvalds1-6/+0
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: [GFS2] Fix GFS2's use of do_div() in its quota calculations [GFS2] Remove unused declaration [GFS2] Remove support for unused and pointless flag [GFS2] Replace rgrp "recent list" with mru list [GFS2] Allow local DF locks when holding a cached EX glock [GFS2] Fix delayed demote race [GFS2] don't call permission() [GFS2] Fix module building [GFS2] Glock documentation [GFS2] Remove all_list from lock_dlm [GFS2] Remove obsolete conversion deadlock avoidance code [GFS2] Remove remote lock dropping code [GFS2] kernel panic mounting volume [GFS2] Revise readpage locking [GFS2] Fix ordering of args for list_add [GFS2] trivial sparse lock annotations [GFS2] No lock_nolock [GFS2] Fix ordering bug in lock_dlm [GFS2] Clean up the glock core
2008-07-15Merge branch 'core/topology' of ↵Linus Torvalds1-0/+13
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core/topology' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: cputopology: always define CPU topology information, clean up cpu topology: always define CPU topology information
2008-07-15Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds1-15/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Fix compile error with CONFIG_AS_CFI=n Documentation: document debugpat commandline option x86: sanitize Kconfig x86, suspend, acpi: correct and add comments about Big Real Mode x86, suspend, acpi: enter Big Real Mode Fixed trivial conflict in include/asm-x86/dwarf2.h due to just using different names for "cfi_ignore" (vs "__cfi_ignore") macro.
2008-07-15Merge branch 'for_linus' of ↵Linus Torvalds5-25/+73
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (61 commits) ext4: Documention update for new ordered mode and delayed allocation ext4: do not set extents feature from the kernel ext4: Don't allow nonextenst mount option for large filesystem ext4: Enable delalloc by default. ext4: delayed allocation i_blocks fix for stat ext4: fix delalloc i_disksize early update issue ext4: Handle page without buffers in ext4_*_writepage() ext4: Add ordered mode support for delalloc ext4: Invert lock ordering of page_lock and transaction start in delalloc mm: Add range_cont mode for writeback ext4: delayed allocation ENOSPC handling percpu_counter: new function percpu_counter_sum_and_set ext4: Add delayed allocation support in data=writeback mode vfs: add hooks for ext4's delayed allocation support jbd2: Remove data=ordered mode support using jbd buffer heads ext4: Use new framework for data=ordered mode in JBD2 jbd2: Implement data=ordered mode handling via inodes vfs: export filemap_fdatawrite_range() ext4: Fix lock inversion in ext4_ext_truncate() ext4: Invert the locking order of page_lock and transaction start ...
2008-07-15Merge branch 'drm-fixes' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon: fixup issue with radeon and PAT support.
2008-07-15Merge branch 'for-linus' of ↵Linus Torvalds16-107/+236
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (52 commits) IB/mlx4: Use kzalloc() for new QPs so flags are initialized to 0 mlx4_core: Use MOD_STAT_CFG command to get minimal page size RDMA/cma: Simplify locking needed for serialization of callbacks RDMA/addr: Keep pointer to netdevice in struct rdma_dev_addr RDMA/cxgb3: Fixes for zero STag RDMA/core: Add local DMA L_Key support IB/mthca: Fix check of max_send_sge for special QPs IB/mthca: Use round_jiffies() for catastrophic error polling timer IB/mthca: Remove "stop" flag for catastrophic error polling timer IPoIB: Double default RX/TX ring sizes IPoIB/cm: Reduce connected mode TX object size IB/ipath: Use IEEE OUI for vendor_id reported by ibv_query_device() IPoIB: Use dev_set_mtu() to change mtu IPoIB: Use rtnl lock/unlock when changing device flags IPoIB: Get rid of ipoib_mcast_detach() wrapper IPoIB: Only set Q_Key once: after joining broadcast group IPoIB: Remove priv->mcast_mutex IPoIB: Remove unused IPOIB_MCAST_STARTED code RDMA/cxgb3: Set rkey field for new memory windows in iwch_alloc_mw() RDMA/nes: Get rid of ring_doorbell parameter of nes_post_cqp_request() ...
2008-07-15x86: Fix compile error with CONFIG_AS_CFI=nKevin Winchester1-15/+15
AS arch/x86/lib/csum-copy_64.o arch/x86/lib/csum-copy_64.S: Assembler messages: arch/x86/lib/csum-copy_64.S:48: Error: Macro `ignore' was already defined make[1]: *** [arch/x86/lib/csum-copy_64.o] Error 1 make: *** [arch/x86/lib] Error 2 It appears that csum-copy_64.S and dwarf2.h both define an ignore macro. I would expect one of them can be renamed quite easily, unless they are references elsewhere. Caused-by-commit: 392a0fc96bd059b38564f5f8fb58327460cb5a9d x86: merge dwarf2 headers Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-07-14RDMA/addr: Keep pointer to netdevice in struct rdma_dev_addrOr Gerlitz1-0/+1
Keep a pointer to the local (src) netdevice in struct rdma_dev_addr, and copy it in as part of rdma_copy_addr(). Use rdma_translate_ip() in cma_new_conn_id() to reduce some code duplication and also make sure the src_dev member gets set. In a high-availability configuration the netdevice pointer can be used by the RDMA CM to align RDMA sessions to use the same links as the IP stack does under fail-over and route change cases. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14RDMA/core: Add local DMA L_Key supportSteve Wise1-1/+2
- Change the IB_DEVICE_ZERO_STAG flag to the transport-neutral name IB_DEVICE_LOCAL_DMA_LKEY, which is used by iWARP RNICs to indicate 0 STag support and IB HCAs to indicate reserved L_Key support. - Add a u32 local_dma_lkey member to struct ib_device. Drivers fill this in with the appropriate local DMA L_Key (if they support it). - Fix up the drivers using this flag. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14IB/mlx4: Add support for blocking multicast loopback packetsRon Livne1-1/+2
Add support for handling the IB_QP_CREATE_MULTICAST_BLOCK_LOOPBACK flag by using the per-multicast group loopback blocking feature of mlx4 hardware. Signed-off-by: Ron Livne <ronli@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14IB/core: Add support for multicast loopback blockingRon Livne1-1/+3
This patch also adds a creation flag for QPs, IB_QP_CREATE_MULTICAST_BLOCK_LOOPBACK, which when set means that multicast sends from the QP to a group that the QP is attached to will not be looped back to the QP's receive queue. This can be used to save receive resources when a consumer does not want a local copy of multicast traffic; for example IPoIB must waste CPU time throwing away such local copies of multicast traffic. This patch also adds a device capability flag that shows whether a device supports this feature or not. Signed-off-by: Ron Livne <ronli@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14RDMA/core: Add iWARP protocol statistics attributes in sysfsSteve Wise1-0/+53
This patch adds a sysfs attribute group called "proto_stats" under /sys/class/infiniband/$device/ and populates this group with protocol statistics if they exist for a given device. Currently, only iWARP stats are defined, but the code is designed to allow InfiniBand protocol stats if they become available. These stats are per-device and more importantly -not- per port. Details: - Add union rdma_protocol_stats in ib_verbs.h. This union allows defining transport-specific stats. Currently only iwarp stats are defined. - Add struct iw_protocol_stats to define the current set of iwarp protocol stats. - Add new ib_device method called get_proto_stats() to return protocol statistics. - Add logic in core/sysfs.c to create iwarp protocol stats attributes if the device is an RNIC and has a get_proto_stats() method. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14RDMA/core: Add memory management extensions supportSteve Wise2-3/+85
This patch adds support for the IB "base memory management extension" (BMME) and the equivalent iWARP operations (which the iWARP verbs mandates all devices must implement). The new operations are: - Allocate an ib_mr for use in fast register work requests. - Allocate/free a physical buffer lists for use in fast register work requests. This allows device drivers to allocate this memory as needed for use in posting send requests (eg via dma_alloc_coherent). - New send queue work requests: * send with remote invalidate * fast register memory region * local invalidate memory region * RDMA read with invalidate local memory region (iWARP only) Consumer interface details: - A new device capability flag IB_DEVICE_MEM_MGT_EXTENSIONS is added to indicate device support for these features. - New send work request opcodes IB_WR_FAST_REG_MR, IB_WR_LOCAL_INV, IB_WR_RDMA_READ_WITH_INV are added. - A new consumer API function, ib_alloc_mr() is added to allocate fast register memory regions. - New consumer API functions, ib_alloc_fast_reg_page_list() and ib_free_fast_reg_page_list() are added to allocate and free device-specific memory for fast registration page lists. - A new consumer API function, ib_update_fast_reg_key(), is added to allow the key portion of the R_Key and L_Key of a fast registration MR to be updated. Consumers call this if desired before posting a IB_WR_FAST_REG_MR work request. Consumers can use this as follows: - MR is allocated with ib_alloc_mr(). - Page list memory is allocated with ib_alloc_fast_reg_page_list(). - MR R_Key/L_Key "key" field is updated with ib_update_fast_reg_key(). - MR made VALID and bound to a specific page list via ib_post_send(IB_WR_FAST_REG_MR) - MR made INVALID via ib_post_send(IB_WR_LOCAL_INV), ib_post_send(IB_WR_RDMA_READ_WITH_INV) or an incoming send with invalidate operation. - MR is deallocated with ib_dereg_mr() - page lists dealloced via ib_free_fast_reg_page_list(). Applications can allocate a fast register MR once, and then can repeatedly bind the MR to different physical block lists (PBLs) via posting work requests to a send queue (SQ). For each outstanding MR-to-PBL binding in the SQ pipe, a fast_reg_page_list needs to be allocated (the fast_reg_page_list is owned by the low-level driver from the consumer posting a work request until the request completes). Thus pipelining can be achieved while still allowing device-specific page_list processing. The 32-bit fast register memory key/STag is composed of a 24-bit index and an 8-bit key. The application can change the key each time it fast registers thus allowing more control over the peer's use of the key/STag (ie it can effectively be changed each time the rkey is rebound to a page list). Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14RDMA: Improve include file coding styleDotan Barak13-40/+17
Remove subversion $Id lines and improve readability by fixing other coding style problems pointed out by checkpatch.pl. Signed-off-by: Dotan Barak <dotanba@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-14RDMA: Fix license textSean Hefty3-61/+73
The license text for several files references a third software license that was inadvertently copied in. Update the license to what was intended. This update was based on a request from HP. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-15drm/radeon: fixup issue with radeon and PAT support.Dave Airlie1-0/+1
With new userspace libpciaccess we can get a conflicting mapping on the PCIE GART table in the video RAM. Always try and map it _wc. Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-14x86: Rename "ignore" macro in <asm/dwarf2.h> to avoid collisionRoland Dreier1-15/+15
Commit 70f1bba4 ("x86: use ignore macro instead of hash comment") breaks the 64-bit x86 build on toolchains that have CONFIG_AS_CFI undefined with: arch/x86/lib/csum-copy_64.S:48: Error: Macro `ignore' was already defined because <asm/dwarf2.h> now uses the ignore macro name itself. Fix this by changing to __cfi_ignore in dwarf2.h. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-14Merge branch 'for-2.6.27' of git://git.infradead.org/users/dwmw2/firmware-2.6Linus Torvalds3-1/+103
* 'for-2.6.27' of git://git.infradead.org/users/dwmw2/firmware-2.6: (64 commits) firmware: convert sb16_csp driver to use firmware loader exclusively dsp56k: use request_firmware edgeport-ti: use request_firmware() edgeport: use request_firmware() vicam: use request_firmware() dabusb: use request_firmware() cpia2: use request_firmware() ip2: use request_firmware() firmware: convert Ambassador ATM driver to request_firmware() whiteheat: use request_firmware() ti_usb_3410_5052: use request_firmware() emi62: use request_firmware() emi26: use request_firmware() keyspan_pda: use request_firmware() keyspan: use request_firmware() ttusb-budget: use request_firmware() kaweth: use request_firmware() smctr: use request_firmware() firmware: convert ymfpci driver to use firmware loader exclusively firmware: convert maestro3 driver to use firmware loader exclusively ... Fix up trivial conflicts with BKL removal in drivers/char/dsp56k.c and drivers/char/ip2/ip2main.c manually.
2008-07-14Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds132-1285/+4821
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (241 commits) [ARM] 5171/1: ep93xx: fix compilation of modules using clocks [ARM] 5133/2: at91sam9g20 defconfig file [ARM] 5130/4: Support for the at91sam9g20 [ARM] 5160/1: IOP3XX: gpio/gpiolib support [ARM] at91: Fix NAND FLASH timings for at91sam9x evaluation kits. [ARM] 5084/1: zylonite: Register AC97 device [ARM] 5085/2: PXA: Move AC97 over to the new central device declaration model [ARM] 5120/1: pxa: correct platform driver names for PXA25x and PXA27x UDC drivers [ARM] 5147/1: pxaficp_ir: drop pxa_gpio_mode calls, as pin setting [ARM] 5145/1: PXA2xx: provide api to control IrDA pins state [ARM] 5144/1: pxaficp_ir: cleanup includes [ARM] pxa: remove pxa_set_cken() [ARM] pxa: allow clk aliases [ARM] Feroceon: don't disable BPU on boot [ARM] Orion: LED support for HP mv2120 [ARM] Orion: add RD88F5181L-FXO support [ARM] Orion: add RD88F5181L-GE support [ARM] Orion: add Netgear WNR854T support [ARM] s3c2410_defconfig: update for current build [ARM] Acer n30: Minor style and indentation fixes. ...
2008-07-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.gitDavid Woodhouse3-1/+103
Conflicts: sound/pci/Kconfig
2008-07-14[ARM] Merge most of the PXA work for initial mergeRussell King12-578/+641
This includes PXA work up to the SPI changes for the initial merge, since e172274ccc55d20536fbdceb6131f38e288541e0 depends on the SPI tree being merged. Conflicts: arch/arm/configs/em_x270_defconfig arch/arm/configs/xm_x270_defconfig
2008-07-14Merge branch 'core/softirq' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core/softirq' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: softirq: remove irqs_disabled warning from local_bh_enable softirq: remove initialization of static per-cpu variable Remove argument from open_softirq which is always NULL
2008-07-14Merge branch 'core/rodata' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core/rodata' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: move BUG_TABLE into RODATA
2008-07-14Merge branch 'core/printk' of ↵Linus Torvalds1-7/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core/printk' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, generic: mark early_printk as asmlinkage printk: export console_drivers printk: remember the message level for multi-line output printk: refactor processing of line severity tokens printk: don't prefer unsuited consoles on registration printk: clean up recursion check related static variables namespacecheck: more kernel/printk.c fixes namespacecheck: fix kernel printk.c
2008-07-14Merge branch 'core/locking' of ↵Linus Torvalds1-8/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core/locking' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: lockdep: fix kernel/fork.c warning lockdep: fix ftrace irq tracing false positive lockdep: remove duplicate definition of STATIC_LOCKDEP_MAP_INIT lockdep: add lock_class information to lock_chain and output it lockdep: add lock_class information to lock_chain and output it lockdep: output lock_class key instead of address for forward dependency output __mutex_lock_common: use signal_pending_state() mutex-debug: check mutex magic before owner Fixed up conflict in kernel/fork.c manually
2008-07-14Merge branch 'sched/new-API-sched_setscheduler' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched/new-API-sched_setscheduler' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: add new API sched_setscheduler_nocheck: add a flag to control access checks
2008-07-14Merge branch 'tracing/for-linus' of ↵Linus Torvalds18-37/+399
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (228 commits) ftrace: build fix for ftraced_suspend ftrace: separate out the function enabled variable ftrace: add ftrace_kill_atomic ftrace: use current CPU for function startup ftrace: start wakeup tracing after setting function tracer ftrace: check proper config for preempt type ftrace: trace schedule ftrace: define function trace nop ftrace: move sched_switch enable after markers ftrace: prevent ftrace modifications while being kprobe'd, v2 fix "ftrace: store mcount address in rec->ip" mmiotrace broken in linux-next (8-bit writes only) ftrace: avoid modifying kprobe'd records ftrace: freeze kprobe'd records kprobes: enable clean usage of get_kprobe ftrace: store mcount address in rec->ip ftrace: build fix with gcc 4.3 namespacecheck: fixes ftrace: fix "notrace" filtering priority ftrace: fix printout ...
2008-07-14Merge branch 'bkl-removal' of git://git.lwn.net/linux-2.6Linus Torvalds2-1/+15
* 'bkl-removal' of git://git.lwn.net/linux-2.6: (146 commits) IB/umad: BKL is not needed for ib_umad_open() IB/uverbs: BKL is not needed for ib_uverbs_open() bf561-coreb: BKL unneeded for open() Call fasync() functions without the BKL snd/PCM: fasync BKL pushdown ipmi: fasync BKL pushdown ecryptfs: fasync BKL pushdown Bluetooth VHCI: fasync BKL pushdown tty_io: fasync BKL pushdown tun: fasync BKL pushdown i2o: fasync BKL pushdown mpt: fasync BKL pushdown Remove BKL from remote_llseek v2 Make FAT users happier by not deadlocking x86-mce: BKL pushdown vmwatchdog: BKL pushdown vmcp: BKL pushdown via-pmu: BKL pushdown uml-random: BKL pushdown uml-mmapper: BKL pushdown ...