Age | Commit message (Collapse) | Author | Files | Lines |
|
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
libata: handle broken cable reporting
pata_hpt37x: Fix outstanding bug reports on the HPT374 and 37x cable detect
ata_piix: Add additional PCI identifier for 40 wire short cable
pata_serverworks: Fix problem with some drive combinations
libata: Don't disable dipm with SET FEATURES
libata and bogus LBA48 drives
|
|
Fix system call defines for system call 180 and 181 to match the underlying
system call table function entries. System call 180 calls sys_pread64, and
181 calls sys_pwrite64, so make the definitions match.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A tiny vestige of arm26 has appeared: remove it again.
(akpm: someone (tm) needs to remove include/asm-arm26/ too)
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The Build with randconfig fails with following error with the
2.6.24-rc4-git9
include/linux/kallsyms.h:56: error: `NULL' undeclared (first use in this
function)
include/linux/kallsyms.h:56: error: (Each undeclared identifier is
reported only once
include/linux/kallsyms.h:56: error: for each function it appears in.)
make[2]: *** [arch/powerpc/platforms/cell/spu_callbacks.o] Error 1
make[1]: *** [arch/powerpc/platforms/cell] Error 2
make: *** [arch/powerpc/platforms] Error 2
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
One or two ancient drives predated the cable spec and didn't sent the
valid bits for the field. I had hoped to leave this out of libata as a
piece of historical annoyance but a recent CD drive shows the same bug so
we have to import support for it.
Same concept as Bartlomiej's changes old IDE except that as we have
centralised blacklists we can avoid keeping another private table of stuff
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6:
PCI: Add Kconfig option to disable deprecated pci_find_* API
PCI: pciserial_resume_one ignored return value of pci_enable_device
PCI Hotplug: cpqhp_pushbutton_thread(): remove a pointless if() check
PCI: make pci_match_device() static
PCI: Remove 3 incorrect MSI quirks.
PCI: Add MSI INTX_DISABLE quirks for ATI SB700/800 SATA and IXP SB400 USB
PCI: Add quirk for devices which disable MSI when INTX_DISABLE is set.
PCI: Add MSI quirk for ServerWorks HT1000 PCIX bridge.
PCI: Revert "PCI: disable MSI by default on systems with Serverworks HT1000 chips"
|
|
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
pci_match_device() no longer has any other users.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Now that we have dealt with the real issue, in that some ATI SATA and
USB controllers needed the INTX_DISABLE quirk, we can remove these AMD
chipset global MSI disabling quirks.
This reverts three changesets:
4be8f906435a6af241821ab5b94b2b12cb7d57d8 (PCI: disable MSI on RS690)
aea6a433f50cd89b9cbd10850fd0b32f961f9883 (PCI: disable MSI on RD580)
f122392f679ebed39db08074f935d770504623eb (PCI: disable MSI on RX790)
This is based upon testing and feedback from
Shane Huang <Shane.Huang@amd.com>.
Cc: Shane Huang <Shane.Huang@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
A reasonably common problem with some devices is that they will
disable MSI generation when the INTX_DISABLE bit is set in the
PCI_COMMAND register.
Quirk this explicitly, guarding the pci_intx() calls in msi.c with
this quirk indication.
The first entries for this quirk are for 5714 and 5780 Tigon3 chips,
and thus we can remove the workaround code from the tg3.c driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Michael Chan <mchan@broadcom.com>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This is the fix for the following problem:
https://bugzilla.redhat.com/show_bug.cgi?id=227657
The bnx2 device 5706 complains about MSI not working behind a
ServerWorks HT1000 PCIX bridge. An earlier commit to fix the problem:
e3008dedff4bdc96a5f67224cd3d8d12237082a0:
"PCI: disable MSI by default on systems with Serverworks HT1000 chips"
was not entirely correct, and has been reverted.
MSI does not work on the PCIX bus because the BIOS did not set the
HT_MSI_FLAGS_ENABLE bit in the HyperTransport MSI capability on the
bridge. We use the existing quirk_msi_ht_cap() to detect the problem
and disable MSI in all buses behind it.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Cc: Anantha Subramanyam <ananth@broadcom.com>
Cc: Naren Sankar <nsankar@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
chips"
This reverts commit e3008dedff4bdc96a5f67224cd3d8d12237082a0.
The real bug was an INTX issue in the tg3 ethernet chip, and
cured by commit c129d962a66c76964954a98b38586ada82cf9381
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest:
lguest: tidy up documentation
kernel/futex.c: make 3 functions static
unexport access_process_vm
lguest: make async_hcall() static
|
|
Commit f2a0bd3753dad7ea4605ebd5435716b39e9f92bb defines the function
with "void cpm_load_patch(cpm8xx_t *cp)" prtotype and is declared as
"extern void cpm_load_patch(volatile immap_t *immr)" in the header file.
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The following functions can now become static again:
- get_futex_key()
- get_futex_key_refs()
- drop_futex_key_refs()
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
async_hcall() can become static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
A colleague noticed recent versions of Ubuntu no longer detect his 80 GB
ST380020ACE drive. This drive is special in that it advertises LBA48 support,
but has the lba_capacity_2 field set to zero (cfr.
http://lkml.org/lkml/2004/3/30/163).
Upon closer look, libata indeed doesn't seem to handle this case yet.
Below is an (untested) fix.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
Originally based on a patch by Kristen Carlson Accardi @ Intel.
Copious input from James Bottomley.
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
|
|
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
[BLOCK] Don't allow empty barriers to be passed down to queues that don't grok them
dm: bounce_pfn limit added
Deadline iosched: Fix batching fairness
Deadline iosched: Reset batch for ordered requests
Deadline iosched: Factor out finding latter reques
|
|
* 'sg' of git://git.kernel.dk/linux-2.6-block:
[SG] Get rid of __sg_mark_end()
cleanup asm/scatterlist.h includes
SG: Make sg_init_one() use general table init functions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep
* 'v2.6.24-rc1-lockdep' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep:
lockdep: fix a typo in the __lock_acquire comment
sched: fix unconditional irq lock
lockdep: fixup irq tracing
|
|
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6:
sh64: Update defconfigs.
sh64: fix dma_cache_sync() compilation
sh64: Move DMA macros from pci.h to scatterlist.h.
|
|
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (24 commits)
sh: Update r7785rp defconfig.
sh: mach-type updates.
sh: Fix up r7780rp highlander CF access size.
sh: Terminate .eh_frame in VDSO with a 4-byte 0.
sh: Correct SUBARCH matching.
sh: Decouple 4k and soft/hardirq stacks.
sh: Fix optimized __copy_user() movca.l usage.
sh: Clean up SR.RB Kconfig mess.
sh: Kill off dead ipr_irq_demux().
sh: Make SH7750 oprofile compile again.
sh: Provide a __read_mostly section wrapper.
sh: linker script tidying.
sh: Move zero page param defs somewhere sensible.
sh: Use generic SMP_CACHE_BYTES/L1_CACHE_ALIGN.
sh: Kill off legacy embedded ramdisk section.
sh: Fix up early mem cmdline parsing.
sh: Enable USBF on MS7722SE.
sh: Add resource of USBF for SH7722.
maple: Fix maple bus compiler warning
sh: fix zImage build with >=binutils-2.18
...
|
|
Commands sent to ATAPI tape drives via the SCSI generic (sg) driver are
limited in the amount of data that they can transfer by the max_sectors
value. The max_sectors value is currently calculated according to the
command set for disk drives, which doesn't apply to tape drives. The
default max_sectors value of 256 limits ATAPI tape drive commands to
128 KB. This patch against 2.6.24-rc1 increases the max_sectors value
for tape drives to 65535, which permits tape drive commands to transfer
just under 32 MB.
Tested with a SuperMicro PDSME motherboard, AHCI, and a Sony SDX-570V
SATA tape drive.
Note that some of the chipset drivers also set their own max_sectors
value, which may override the value set in libata-core. I don't have
any of these chipsets to test, so I didn't go messing with them. Also,
ATAPI devices other than tape drives may benefit from similar changes,
but I have only tape drives and disk drives to test.
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
|
|
The Jazz machines have to use the PIT timer for dyntick and highresolution
kernels. This may break because currently just like i386 used to do MIPS
uses two separate spinlocks in the actual PIT code and the PC speaker
code. So switch to do it the same that x86 currently does PIT locking.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: linux-input mailing list moved to vger.kernel.org
Input: inport, logibm - use KERN_INFO when reporting missing mouse
Input: appletouch - idle reset logic broke older Fountains
Input: hp_sdc.c - fix section mismatch
Input: appletouch - add Johannes Berg as maintainer
Input: Add Euro and Dollar key codes
Input: xpad - add more USB IDs
|
|
This is the clock rate of the i8253 PIT. A MIPS system may not have
a PIT by the symbol is used all over the kernel including some APIs.
So keeping it defined to the number for the PIT is the only sane thing
for now.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
* Do not include unnecessary headers.
* Do not mention time.README.
* Do not mention mips_timer_ack.
* Make clocksource_mips static. It is now dedicated to c0_timer.
* Initialize clocksource_mips.read statically.
* Remove null_hpt_read.
* Remove an argument of plat_timer_setup. It is just a placeholder.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Device mapper uses its own bounce_pfn that may differ from one on underlying
device. In that way dm can build incorrect requests that contain sg elements
greater than underlying device is able to handle.
This is the cause of slab corruption in i2o layer, occurred on i386 arch when
very long direct IO requests are addressed to dm-over-i2o device.
Signed-off-by: Vasily Averin <vvs@sw.ru>
Cc: <stable@kernel.org>
Cc: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
sg_mark_end() overwrites the page_link information, but all users want
__sg_mark_end() behaviour where we just set the end bit. That is the most
natural way to use the sg list, since you'll fill it in and then mark the
end point.
So change sg_mark_end() to only set the termination bit. Add a sg_magic
debug check as well, and clear a chain pointer if it is set.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
Not architecture specific code should not #include <asm/scatterlist.h>.
This patch therefore either replaces them with
#include <linux/scatterlist.h> or simply removes them if they were
unused.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
Don't open code sg_init_one(), make it reuse sg_init_table().
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
|
While using separate IRQ stacks can cut down on stack consumption,
many users can also use 4k stacks directly without the additional
need of separate stacks for soft and hardirqs.
With this split, we support the same rationale for 4KSTACKS as
m68knommu, with the IRQSTACKS abstraction as per ppc64.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
|
|
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
[IRDA] IRNET: Fix build when TCGETS2 is defined.
[NET]: docbook fixes for netif_ functions
[NET]: Hide the net_ns kmem cache
[NET]: Mark the setup_net as __net_init
[NET]: Hide the dead code in the net_namespace.c
[NET]: Relax the reference counting of init_net_ns
[NETNS]: Make the init/exit hooks checks outside the loop
[NET]: Forget the zero_it argument of sk_alloc()
[NET]: Remove bogus zero_it argument from sk_alloc
[NET]: Make the sk_clone() lighter
[NET]: Move some core sock setup into sk_prot_alloc
[NET]: Auto-zero the allocated sock object
[NET]: Cleanup the allocation/freeing of the sock object
[NET]: Move the get_net() from sock_copy()
[NET]: Move the sock_copy() from the header
[TCP]: Another TAGBITS -> SACKED_ACKED|LOST conversion
[TCP]: Process DSACKs that reside within a SACK block
|
|
Documentation updates for network interfaces.
1. Add doc for netif_napi_add
2. Remove doc for unused returns from netif_rx
3. Add doc for netif_receive_skb
[ Incorporated minor mods from Randy Dunlap -DaveM ]
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the CONFIG_NET_NS is n there's no need in refcounting
the initial net namespace. So relax this code by making a
stupid stubs for the "n" case.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Finally, the zero_it argument can be completely removed from
the callers and from the function prototype.
Besides, fix the checkpatch.pl warnings about using the
assignments inside if-s.
This patch is rather big, and it is a part of the previous one.
I splitted it wishing to make the patches more readable. Hope
this particular split helped.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The sock_copy() call is not used outside the sock.c file,
so just move it into a sock.c
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This was found by make randconfig
If the kernel .text is very large, the .fixup section branches
are too far away to be relocated correctly.
Use "sethi %hi(label), reg; jmpl reg + %lo(label); %g0" sequence
instead of the branch to fix this.
There is another case in switch_to() involving a branch, which
is fixed similarly.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6:
Revert "Driver core: remove class_device_*_bin_file"
|
|
* master.kernel.org:/home/rmk/linux-2.6-arm:
[ARM] 4634/1: DaVinci GPIO header build fix
[ARM] 4636/1: pxa: add default configuration for zylonite
[ARM] 4635/1: pxa: Change Eric Miao's email address to eric.miao@marvell.com
[ARM] Fix assignment instead of condition in arm/mach-omap2/clock.c
[ARM] nommu: fix breakage caused by f9720205d1f847cb59e197e851b5276425363f6b
[ARM] pxa: shut up CLOCK_EVT_MODE_RESUME warning
[ARM] Fix FIQ issue with ARM926
[ARM] Fix pxamci regression
[ARM] Fix netx_defconfig regression
[ARM] Fix ateb9200_defconfig build regression
[ARM] Fix an rpc_defconfig regression
[ARM] Fix omap_h2_1610_defconfig regressions
[ARM] 4632/1: Fix a typo in include/asm-arm/plat-s3c/regs-nand.h
|
|
This reverts commit fcd239d3d5575e5cc63aab5c33cf6dc66904f6d6.
I messed up, ia64 still uses these files in the current tree, and now
can not build the pci code, which all ia64 boxes seem to require :)
This fixes that mistake.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This fixes a build problem with GPIOs on DaVinci. Since it inlines
operations for on-chip GPIOs, it needs some headers to support those
direct register accesses. Those headers won't be included on other
platforms, since they don't have that optimization.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Someone forgot to use 'ls include/asm-*/flat.h' or
'grep -r flat_get_addr_from_rp .' to find all architectures which
may be affected by their change. Fix the fall out.
Noticed-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
Fix:
CC drivers/serial/atmel_serial.o
drivers/serial/atmel_serial.c: In function 'atmel_serial_suspend':
drivers/serial/atmel_serial.c:924: error: implicit declaration of function 'at91_suspend_entering_slow_clock'
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|