summaryrefslogtreecommitdiff
path: root/fs/aio.c
AgeCommit message (Collapse)AuthorFilesLines
2013-09-26aio: fix use-after-free in aio_migratepageBenjamin LaHaise1-15/+37
Dmitry Vyukov managed to trigger a case where aio_migratepage can cause a use-after-free during teardown of the aio ring buffer's mapping. This turns out to be caused by access to the ioctx's ring_pages via the migratepage operation which was not being protected by any locks during ioctx freeing. Use the address_space's private_lock to protect use and updates of the mapping's private_data, and make ioctx teardown unlink the ioctx from the address space. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
2013-09-09aio: rcu_read_lock protection for new rcu_dereference callsArtem Savkov1-0/+6
Patch "aio: fix rcu sparse warnings introduced by ioctx table lookup patch" (77d30b14d24e557f89c41980011d72428514d729 in linux-next.git) introduced a couple of new rcu_dereference calls which are not protected by rcu_read_lock and result in following warnings during syscall fuzzing(trinity): [ 471.646379] =============================== [ 471.649727] [ INFO: suspicious RCU usage. ] [ 471.653919] 3.11.0-next-20130906+ #496 Not tainted [ 471.657792] ------------------------------- [ 471.661235] fs/aio.c:503 suspicious rcu_dereference_check() usage! [ 471.665968] [ 471.665968] other info that might help us debug this: [ 471.665968] [ 471.672141] [ 471.672141] rcu_scheduler_active = 1, debug_locks = 1 [ 471.677549] 1 lock held by trinity-child0/3774: [ 471.681675] #0: (&(&mm->ioctx_lock)->rlock){+.+...}, at: [<c119ba1a>] SyS_io_setup+0x63a/0xc70 [ 471.688721] [ 471.688721] stack backtrace: [ 471.692488] CPU: 1 PID: 3774 Comm: trinity-child0 Not tainted 3.11.0-next-20130906+ #496 [ 471.698437] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 471.703151] 00000000 00000000 c58bbf30 c18a814b de2234c0 c58bbf58 c10a4ec6 c1b0d824 [ 471.709544] c1b0f60e 00000001 00000001 c1af61b0 00000000 cb670ac0 c3aca000 c58bbfac [ 471.716251] c119bc7c 00000002 00000001 00000000 c119b8dd 00000000 c10cf684 c58bbfb4 [ 471.722902] Call Trace: [ 471.724859] [<c18a814b>] dump_stack+0x4b/0x66 [ 471.728772] [<c10a4ec6>] lockdep_rcu_suspicious+0xc6/0x100 [ 471.733716] [<c119bc7c>] SyS_io_setup+0x89c/0xc70 [ 471.737806] [<c119b8dd>] ? SyS_io_setup+0x4fd/0xc70 [ 471.741689] [<c10cf684>] ? __audit_syscall_entry+0x94/0xe0 [ 471.746080] [<c18b1fcc>] syscall_call+0x7/0xb [ 471.749723] [<c1080000>] ? task_fork_fair+0x240/0x260 Signed-off-by: Artem Savkov <artem.savkov@gmail.com> Reviewed-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
2013-09-09aio: fix race in ring buffer page lookup introduced by page migration supportBenjamin LaHaise1-3/+12
Prior to the introduction of page migration support in "fs/aio: Add support to aio ring pages migration" / 36bc08cc01709b4a9bb563b35aa530241ddc63e3, mapping of the ring buffer pages was done via get_user_pages() while retaining mmap_sem held for write. This avoided possible races with userland racing an munmap() or mremap(). The page migration patch, however, switched to using mm_populate() to prime the page mapping. mm_populate() cannot be called with mmap_sem held. Instead of dropping the mmap_sem, revert to the old behaviour and simply drop the use of mm_populate() since get_user_pages() will cause the pages to get mapped anyways. Thanks to Al Viro for spotting this issue. Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
2013-08-30aio: fix rcu sparse warnings introduced by ioctx table lookup patchBenjamin LaHaise1-3/+3
Sseveral sparse warnings were caused by missing rcu_dereference() annotations for dereferencing mm->ioctx_table. Thankfully, none of those were actual bugs as the deref was protected by a spin lock in all instances. Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> Reported-by: Fengguang Wu <fengguang.wu@intel.com>
2013-08-30aio: remove unnecessary debugging from aio_free_ring()Benjamin LaHaise1-5/+0
The commit 36bc08cc0170 ("fs/aio: Add support to aio ring pages migration") added some debugging code that is not required and resulted in a build error when 98474236f72e ("vfs: make the dentry cache use the lockref infrastructure") was added to the tree. The code is not required, so just delete it. Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
2013-08-07aio: table lookup: verify ctx pointerBenjamin LaHaise1-1/+1
Another shortcoming of the table lookup patch was revealed where the pointer was not being tested before being dereferenced. Verify this to avoid the NULL pointer dereference. Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
2013-08-05aio: fix error handling and rcu usage in "convert the ioctx list to table ↵Benjamin LaHaise1-8/+9
lookup v3" In the patch "aio: convert the ioctx list to table lookup v3", incorrect handling in the ioctx_alloc() error path was introduced that lead to an ioctx being added via ioctx_add_table() while freed when the ioctx_alloc() call returned -EAGAIN due to hitting the aio_max_nr limit. Fix this by only calling ioctx_add_table() as the last step in ioctx_alloc(). Also, several unnecessary rcu_dereference() calls were added that lead to RCU warnings where the system was already protected by a spin lock for accessing mm->ioctx_table. Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
2013-07-31aio: be defensive to ensure request batching is non-zero instead of BUG_ON()Benjamin LaHaise1-1/+2
In the event that an overflow/underflow occurs while calculating req_batch, clamp the minimum at 1 request instead of doing a BUG_ON(). Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
2013-07-30aio: convert the ioctx list to table lookup v3Benjamin LaHaise1-22/+114
On Wed, Jun 12, 2013 at 11:14:40AM -0700, Kent Overstreet wrote: > On Mon, Apr 15, 2013 at 02:40:55PM +0300, Octavian Purdila wrote: > > When using a large number of threads performing AIO operations the > > IOCTX list may get a significant number of entries which will cause > > significant overhead. For example, when running this fio script: > > > > rw=randrw; size=256k ;directory=/mnt/fio; ioengine=libaio; iodepth=1 > > blocksize=1024; numjobs=512; thread; loops=100 > > > > on an EXT2 filesystem mounted on top of a ramdisk we can observe up to > > 30% CPU time spent by lookup_ioctx: > > > > 32.51% [guest.kernel] [g] lookup_ioctx > > 9.19% [guest.kernel] [g] __lock_acquire.isra.28 > > 4.40% [guest.kernel] [g] lock_release > > 4.19% [guest.kernel] [g] sched_clock_local > > 3.86% [guest.kernel] [g] local_clock > > 3.68% [guest.kernel] [g] native_sched_clock > > 3.08% [guest.kernel] [g] sched_clock_cpu > > 2.64% [guest.kernel] [g] lock_release_holdtime.part.11 > > 2.60% [guest.kernel] [g] memcpy > > 2.33% [guest.kernel] [g] lock_acquired > > 2.25% [guest.kernel] [g] lock_acquire > > 1.84% [guest.kernel] [g] do_io_submit > > > > This patchs converts the ioctx list to a radix tree. For a performance > > comparison the above FIO script was run on a 2 sockets 8 core > > machine. This are the results (average and %rsd of 10 runs) for the > > original list based implementation and for the radix tree based > > implementation: > > > > cores 1 2 4 8 16 32 > > list 109376 ms 69119 ms 35682 ms 22671 ms 19724 ms 16408 ms > > %rsd 0.69% 1.15% 1.17% 1.21% 1.71% 1.43% > > radix 73651 ms 41748 ms 23028 ms 16766 ms 15232 ms 13787 ms > > %rsd 1.19% 0.98% 0.69% 1.13% 0.72% 0.75% > > % of radix > > relative 66.12% 65.59% 66.63% 72.31% 77.26% 83.66% > > to list > > > > To consider the impact of the patch on the typical case of having > > only one ctx per process the following FIO script was run: > > > > rw=randrw; size=100m ;directory=/mnt/fio; ioengine=libaio; iodepth=1 > > blocksize=1024; numjobs=1; thread; loops=100 > > > > on the same system and the results are the following: > > > > list 58892 ms > > %rsd 0.91% > > radix 59404 ms > > %rsd 0.81% > > % of radix > > relative 100.87% > > to list > > So, I was just doing some benchmarking/profiling to get ready to send > out the aio patches I've got for 3.11 - and it looks like your patch is > causing a ~1.5% throughput regression in my testing :/ ... <snip> I've got an alternate approach for fixing this wart in lookup_ioctx()... Instead of using an rbtree, just use the reserved id in the ring buffer header to index an array pointing the ioctx. It's not finished yet, and it needs to be tidied up, but is most of the way there. -ben -- "Thought is the essence of where you are now." -- kmo> And, a rework of Ben's code, but this was entirely his idea kmo> -Kent bcrl> And fix the code to use the right mm_struct in kill_ioctx(), actually free memory. Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
2013-07-30aio: double aio_max_nr in calculationsBenjamin LaHaise1-2/+2
With the changes to use percpu counters for aio event ring size calculation, existing increases to aio_max_nr are now insufficient to allow for the allocation of enough events. Double the value used for aio_max_nr to account for the doubling introduced by the percpu slack. Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
2013-07-30aio: Kill ki_dtorKent Overstreet1-2/+0
sock_aio_dtor() is dead code - and stuff that does need to do cleanup can simply do it before calling aio_complete(). Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
2013-07-30aio: Kill ki_usersKent Overstreet1-35/+12
The kiocb refcount is only needed for cancellation - to ensure a kiocb isn't freed while a ki_cancel callback is running. But if we restrict ki_cancel callbacks to not block (which they currently don't), we can simply drop the refcount. Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
2013-07-30aio: Kill unneeded kiocb membersKent Overstreet1-29/+40
The old aio retry infrastucture needed to save the various arguments to to aio operations. But with the retry infrastructure gone, we can trim struct kiocb quite a bit. Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
2013-07-30aio: Kill aio_rw_vect_retry()Kent Overstreet1-73/+18
This code doesn't serve any purpose anymore, since the aio retry infrastructure has been removed. This change should be safe because aio_read/write are also used for synchronous IO, and called from do_sync_read()/do_sync_write() - and there's no looping done in the sync case (the read and write syscalls). Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
2013-07-30aio: Don't use ctx->tail unnecessarilyKent Overstreet1-19/+23
aio_complete() (arguably) needs to keep its own trusted copy of the tail pointer, but io_getevents() doesn't have to use it - it's already using the head pointer from the ring buffer. So convert it to use the tail from the ring buffer so it touches fewer cachelines and doesn't contend with the cacheline aio_complete() needs. Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
2013-07-30aio: io_cancel() no longer returns the io_eventKent Overstreet1-30/+10
Originally, io_event() was documented to return the io_event if cancellation succeeded - the io_event wouldn't be delivered via the ring buffer like it normally would. But this isn't what the implementation was actually doing; the only driver implementing cancellation, the usb gadget code, never returned an io_event in its cancel function. And aio_complete() was recently changed to no longer suppress event delivery if the kiocb had been cancelled. This gets rid of the unused io_event argument to kiocb_cancel() and kiocb->ki_cancel(), and changes io_cancel() to return -EINPROGRESS if kiocb->ki_cancel() returned success. Also tweak the refcounting in kiocb_cancel() to make more sense. Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
2013-07-30aio: percpu ioctx refcountKent Overstreet1-39/+27
This just converts the ioctx refcount to the new generic dynamic percpu refcount code. Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
2013-07-30aio: percpu reqs_availableKent Overstreet1-7/+99
See the previous patch ("aio: reqs_active -> reqs_available") for why we want to do this - this basically implements a per cpu allocator for reqs_available that doesn't actually allocate anything. Note that we need to increase the size of the ringbuffer we allocate, since a single thread won't necessarily be able to use all the reqs_available slots - some (up to about half) might be on other per cpu lists, unavailable for the current thread. We size the ringbuffer based on the nr_events userspace passed to io_setup(), so this is a slight behaviour change - but nr_events wasn't being used as a hard limit before, it was being rounded up to the next page before so this doesn't change the actual semantics. Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
2013-07-30aio: reqs_active -> reqs_availableKent Overstreet1-16/+22
The number of outstanding kiocbs is one of the few shared things left that has to be touched for every kiocb - it'd be nice to make it percpu. We can make it per cpu by treating it like an allocation problem: we have a maximum number of kiocbs that can be outstanding (i.e. slots) - then we just allocate and free slots, and we know how to write per cpu allocators. So as prep work for that, we convert reqs_active to reqs_available. Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
2013-07-17aio: fix build when migration is disabledBenjamin LaHaise1-0/+4
When "fs/aio: Add support to aio ring pages migration" was applied, it broke the build when CONFIG_MIGRATION was disabled. Wrap the migration code with a test for CONFIG_MIGRATION to fix this and save a few bytes when migration is disabled. Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
2013-07-16fs/aio: Add support to aio ring pages migrationGu Zheng1-11/+108
As the aio job will pin the ring pages, that will lead to mem migrated failed. In order to fix this problem we use an anon inode to manage the aio ring pages, and setup the migratepage callback in the anon inode's address space, so that when mem migrating the aio ring pages will be moved to other mem node safely. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
2013-07-03aio: fix wrong comment in aio_complete()Tang Chen1-1/+1
ctx->ctx_lock should be ctx->completion_lock. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-29constify rw_verify_area()Al Viro1-0/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-12aio: fix io_destroy() regression by using call_rcu()Kent Overstreet1-20/+16
There was a regression introduced by 36f5588905c1 ("aio: refcounting cleanup"), reported by Jens Axboe - the refcounting cleanup switched to using RCU in the shutdown path, but the synchronize_rcu() was done in the context of the io_destroy() syscall greatly increasing the time it could block. This patch switches it to call_rcu() and makes shutdown asynchronous (more asynchronous than it was originally; before the refcount changes io_destroy() would still wait on pending kiocbs). Note that there's a global quota on the max outstanding kiocbs, and that quota must be manipulated synchronously; otherwise io_setup() could return -EAGAIN when there isn't quota available, and userspace won't have any way of waiting until shutdown of the old kioctxs has finished (besides busy looping). So we release our quota before kioctx shutdown has finished, which should be fine since the quota never corresponded to anything real anyways. Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Reported-by: Jens Axboe <axboe@kernel.dk> Tested-by: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> Tested-by: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-24aio: fix kioctx not being freed after cancellation at exit timeBenjamin LaHaise1-1/+3
The recent changes overhauling fs/aio.c introduced a bug that results in the kioctx not being freed when outstanding kiocbs are cancelled at exit_aio() time. Specifically, a kiocb that is cancelled has its completion events discarded by batch_complete_aio(), which then fails to wake up the process stuck in free_ioctx(). Fix this by modifying the wait_event() condition in free_ioctx() appropriately. This patch was tested with the cancel operation in the thread based code posted yesterday. [akpm@linux-foundation.org: fix build] Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Josh Boyer <jwboyer@redhat.com> Cc: Zach Brown <zab@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-24aio: fix io_getevents documentationJeff Moyer1-2/+1
In reviewing man pages, I noticed that io_getevents is documented to update the timeout that gets passed into the library call. This doesn't happen in kernel space or in the library (even though it's documented to do so in both places). Unless there is objection, I'd like to fix the comments/docs to match the code (I will also update the man page upon consensus). Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> Acked-by: Cyril Hrubis <chrubis@suse.cz> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07aio: kill ki_retryKent Overstreet1-139/+85
Thanks to Zach Brown's work to rip out the retry infrastructure, we don't need this anymore - ki_retry was only called right after the kiocb was initialized. This also refactors and trims some duplicated code, as well as cleaning up the refcounting/error handling a bit. [akpm@linux-foundation.org: use fmode_t in aio_run_iocb()] [akpm@linux-foundation.org: fix file_start_write/file_end_write tests] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07aio: kill ki_keyKent Overstreet1-2/+5
ki_key wasn't actually used for anything previously - it was always 0. Drop it to trim struct kiocb a bit. Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07aio: give shared kioctx fields their own cachelinesKent Overstreet1-12/+15
[akpm@linux-foundation.org: make reqs_active __cacheline_aligned_in_smp] Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07aio: kill struct aio_ring_infoKent Overstreet1-81/+74
struct aio_ring_info was kind of odd, the only place it's used is where it's embedded in struct kioctx - there's no real need for it. The next patch rearranges struct kioctx and puts various things on their own cachelines - getting rid of struct aio_ring_info now makes that reordering a bit clearer. Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07aio: kill batch allocationKent Overstreet1-101/+15
Previously, allocating a kiocb required touching quite a few global (well, per kioctx) cachelines... so batching up allocation to amortize those was worthwhile. But we've gotten rid of some of those, and in another couple of patches kiocb allocation won't require writing to any shared cachelines, so that means we can just rip this code out. Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07aio: change reqs_active to include unreaped completionsKent Overstreet1-15/+32
The aio code tries really hard to avoid having to deal with the completion ringbuffer overflowing. To do that, it has to keep track of the number of outstanding kiocbs, and the number of completions currently in the ringbuffer - and it's got to check that every time we allocate a kiocb. Ouch. But - we can improve this quite a bit if we just change reqs_active to mean "number of outstanding requests and unreaped completions" - that means kiocb allocation doesn't have to look at the ringbuffer, which is a fairly significant win. Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07aio: use cancellation list lazilyKent Overstreet1-44/+62
Cancelling kiocbs requires adding them to a per kioctx linked list, which is one of the few things we need to take the kioctx lock for in the fast path. But most kiocbs can't be cancelled - so if we just do this lazily, we can avoid quite a bit of locking overhead. While we're at it, instead of using a flag bit switch to using ki_cancel itself to indicate that a kiocb has been cancelled/completed. This lets us get rid of ki_flags entirely. [akpm@linux-foundation.org: remove buggy BUG()] Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07aio: use flush_dcache_page()Kent Overstreet1-28/+17
This wasn't causing problems before because it's not needed on x86, but it is needed on other architectures. Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07aio: make aio_read_evt() more efficient, convert to hrtimersKent Overstreet1-150/+90
Previously, aio_read_event() pulled a single completion off the ringbuffer at a time, locking and unlocking each time. Change it to pull off as many events as it can at a time, and copy them directly to userspace. This also fixes a bug where if copying the event to userspace failed, we'd lose the event. Also convert it to wait_event_interruptible_hrtimeout(), which simplifies it quite a bit. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07aio: refcounting cleanupKent Overstreet1-153/+119
The usage of ctx->dead was fubar - it makes no sense to explicitly check it all over the place, especially when we're already using RCU. Now, ctx->dead only indicates whether we've dropped the initial refcount. The new teardown sequence is: set ctx->dead hlist_del_rcu(); synchronize_rcu(); Now we know no system calls can take a new ref, and it's safe to drop the initial ref: put_ioctx(); We also need to ensure there are no more outstanding kiocbs. This was done incorrectly - it was being done in kill_ctx(), and before dropping the initial refcount. At this point, other syscalls may still be submitting kiocbs! Now, we cancel and wait for outstanding kiocbs in free_ioctx(), after kioctx->users has dropped to 0 and we know no more iocbs could be submitted. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07aio: make aio_put_req() locklessKent Overstreet1-52/+34
Freeing a kiocb needed to touch the kioctx for three things: * Pull it off the reqs_active list * Decrementing reqs_active * Issuing a wakeup, if the kioctx was in the process of being freed. This patch moves these to aio_complete(), for a couple reasons: * aio_complete() already has to issue the wakeup, so if we drop the kioctx refcount before aio_complete does its wakeup we don't have to do it twice. * aio_complete currently has to take the kioctx lock, so it makes sense for it to pull the kiocb off the reqs_active list too. * A later patch is going to change reqs_active to include unreaped completions - this will mean allocating a kiocb doesn't have to look at the ringbuffer. So taking the decrement of reqs_active out of kiocb_free() is useful prep work for that patch. This doesn't really affect cancellation, since existing (usb) code that implements a cancel function still calls aio_complete() - we just have to make sure that aio_complete does the necessary teardown for cancelled kiocbs. It does affect code paths where we free kiocbs that were never submitted; they need to decrement reqs_active and pull the kiocb off the reqs_active list. This occurs in two places: kiocb_batch_free(), which is going away in a later patch, and the error path in io_submit_one. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Acked-by: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07aio: do fget() after aio_get_req()Kent Overstreet1-13/+9
aio_get_req() will fail if we have the maximum number of requests outstanding, which depending on the application may not be uncommon. So avoid doing an unnecessary fget(). Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Acked-by: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07aio: dprintk() -> pr_debug()Kent Overstreet1-33/+24
Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Acked-by: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07aio: move private stuff out of aio.hKent Overstreet1-0/+61
Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Acked-by: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07aio: add kiocb_cancel()Kent Overstreet1-36/+43
Minor refactoring, to get rid of some duplicated code [akpm@linux-foundation.org: fix warning] Signed-off-by: Kent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Acked-by: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07aio: kill return value of aio_complete()Kent Overstreet1-14/+7
Nothing used the return value, and it probably wasn't possible to use it safely for the locked versions (aio_complete(), aio_put_req()). Just kill it. Signed-off-by: Kent Overstreet <koverstreet@google.com> Acked-by: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Acked-by: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07aio: remove retry-based AIOZach Brown1-324/+27
This removes the retry-based AIO infrastructure now that nothing in tree is using it. We want to remove retry-based AIO because it is fundemantally unsafe. It retries IO submission from a kernel thread that has only assumed the mm of the submitting task. All other task_struct references in the IO submission path will see the kernel thread, not the submitting task. This design flaw means that nothing of any meaningful complexity can use retry-based AIO. This removes all the code and data associated with the retry machinery. The most significant benefit of this is the removal of the locking around the unused run list in the submission path. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Kent Overstreet <koverstreet@google.com> Signed-off-by: Zach Brown <zab@redhat.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Acked-by: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-01Merge branch 'for-linus' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS updates from Al Viro, Misc cleanups all over the place, mainly wrt /proc interfaces (switch create_proc_entry to proc_create(), get rid of the deprecated create_proc_read_entry() in favor of using proc_create_data() and seq_file etc). 7kloc removed. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits) don't bother with deferred freeing of fdtables proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h proc: Make the PROC_I() and PDE() macros internal to procfs proc: Supply a function to remove a proc entry by PDE take cgroup_open() and cpuset_open() to fs/proc/base.c ppc: Clean up scanlog ppc: Clean up rtas_flash driver somewhat hostap: proc: Use remove_proc_subtree() drm: proc: Use remove_proc_subtree() drm: proc: Use minor->index to label things, not PDE->name drm: Constify drm_proc_list[] zoran: Don't print proc_dir_entry data in debug reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show() proc: Supply an accessor for getting the data from a PDE's parent airo: Use remove_proc_subtree() rtl8192u: Don't need to save device proc dir PDE rtl8187se: Use a dir under /proc/net/r8180/ proc: Add proc_mkdir_data() proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h} proc: Move PDE_NET() to fs/proc/proc_net.c ...
2013-05-01Merge branch 'for-linus' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal Pull compat cleanup from Al Viro: "Mostly about syscall wrappers this time; there will be another pile with patches in the same general area from various people, but I'd rather push those after both that and vfs.git pile are in." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: syscalls.h: slightly reduce the jungles of macros get rid of union semop in sys_semctl(2) arguments make do_mremap() static sparc: no need to sign-extend in sync_file_range() wrapper ppc compat wrappers for add_key(2) and request_key(2) are pointless x86: trim sys_ia32.h x86: sys32_kill and sys32_mprotect are pointless get rid of compat_sys_semctl() and friends in case of ARCH_WANT_OLD_COMPAT_IPC merge compat sys_ipc instances consolidate compat lookup_dcookie() convert vmsplice to COMPAT_SYSCALL_DEFINE switch getrusage() to COMPAT_SYSCALL_DEFINE switch epoll_pwait to COMPAT_SYSCALL_DEFINE convert sendfile{,64} to COMPAT_SYSCALL_DEFINE switch signalfd{,4}() to COMPAT_SYSCALL_DEFINE make SYSCALL_DEFINE<n>-generated wrappers do asmlinkage_protect make HAVE_SYSCALL_WRAPPERS unconditional consolidate cond_syscall and SYSCALL_ALIAS declarations teach SYSCALL_DEFINE<n> how to deal with long long/unsigned long long get rid of duplicate logics in __SC_....[1-6] definitions
2013-04-26aio: fix possible invalid memory access when DEBUG is enabledZhao Hongjiang1-1/+1
dprintk() shouldn't access @ring after it's unmapped. Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-09lift sb_start_write/sb_end_write out of ->aio_write()Al Viro1-0/+4
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-03make SYSCALL_DEFINE<n>-generated wrappers do asmlinkage_protectAl Viro1-2/+0
... and switch i386 to HAVE_SYSCALL_WRAPPERS, killing open-coded uses of asmlinkage_protect() in a bunch of syscalls. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-27hlist: drop the node parameter from iteratorsSasha Levin1-2/+1
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23mm: make do_mmap_pgoff return populate as a size in bytes, not as a boolMichel Lespinasse1-3/+2
do_mmap_pgoff() rounds up the desired size to the next PAGE_SIZE multiple, however there was no equivalent code in mm_populate(), which caused issues. This could be fixed by introduced the same rounding in mm_populate(), however I think it's preferable to make do_mmap_pgoff() return populate as a size rather than as a boolean, so we don't have to duplicate the size rounding logic in mm_populate(). Signed-off-by: Michel Lespinasse <walken@google.com> Acked-by: Rik van Riel <riel@redhat.com> Tested-by: Andy Lutomirski <luto@amacapital.net> Cc: Greg Ungerer <gregungerer@westnet.com.au> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>