summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2009-12-13mfd: Fix incorrect error check for wm8350-coreDan Carpenter1-1/+1
It was *pdev which was allocated not pdev. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Fix twl4030 warningAlan Cox1-1/+2
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13gpiolib: Implement gpio_to_irq() for wm831xMark Brown1-0/+13
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Remove default selection of AB4500Linus Walleij1-1/+0
This remove the default 'y' selection of AB4500, currently everyone enabling the SPI subsystem will get a copy of this driver. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Move WM831x to generic IRQMark Brown2-126/+92
Replace the wm831x-local IRQ infrastructure with genirq, allowing access to the diagnostic infrastructure of genirq and allowing us to implement interrupt support for the GPIOs. The switchover is done within the wm831x specific IRQ API, further patches will convert the individual drivers to use genirq directly. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Initial support for twl5031Ilkka Koskinen2-5/+139
TWL5031 introduces two new interrupts in PIH. Moreover, BCI has changed remarkably and, thus, it's disabled when TWL5031 is in use. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Mask and unmask wm8350 IRQs on request and freeMark Brown4-35/+5
Bring the WM8350 IRQ API more in line with the generic IRQ API by masking and unmasking interrupts as they are requested and freed. This is mostly just a case of deleting the mask and unmask calls from the individual drivers. The RTC driver is changed to mask the periodic IRQ after requesting it rather than only unmasking the alarm IRQ. If the periodic IRQ fires in the period where it is reqested then there will be a spurious notification but there should be no serious consequences from this. The CODEC drive is changed to explicitly disable headphone jack detection prior to requesting the IRQs. This will avoid the IRQ firing with no jack set up. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Convert wm8350 IRQ handlers to irq_handler_tMark Brown4-25/+45
This is done as simple code transformation, the semantics of the IRQ API provided by the core are are still very different to those of genirq (mainly with regard to masking). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: ezx-pcap: Don't pass pcap pointer as subdev drvdata.Antonio Ospite1-1/+0
Abusing subdev drvdata is not needed anymore, as all pcap subdevs are now retrieving the pcap pointer from their parent device. This change removes a leftover coming from early versions of ezx-pcap and its subdevs drivers. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Allow configuration of VDCDC2 for tps65010Ben Dooks1-0/+28
Add function to allow the configuation fo the VDCDC2 register by external users, to allow changing of the standard and low-power running modes. This is needed, for example, for the Simtec IM2440D20 where we need to use the low-power mode to shutdown the LDO/DCDC that are not needed during suspend (saving substantial power) and the runtime use of the low-power mode to change VCore. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Allow the board to choose any GPIO base for tps65010Ben Dooks1-1/+1
If the board does not care where the TPS turns up, then specifiying the value -1 to get gpiolib to dynamically allocate the base for the chip is valid. Change the test to look for != 0, so that any boards specifying zero will not end up with gpio that they didn't want. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Liunx Team <linux@simtec.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Enable twl4030 32kHz oscillator low-power modeIlkka Koskinen1-2/+7
Allows TWL's 32kHz oscillator to go in low-power mode when main battery voltage is running low. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Fix more undefined twl4030-power resconfig value checksAmit Kucheria1-2/+2
Based on Aaro's previous fix, this needs to be fixed for the newly added remap_off and remap_sleep resources as well. The code tries to skip values initialized with -1, but since the values are unsigned the comparison is always true. The patch eliminates the following compiler warnings: drivers/mfd/twl4030-power.c: In function 'twl4030_configure_resource': drivers/mfd/twl4030-power.c:338: warning: comparison is always true due to limited range of data type Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Cleanup pcf50633_probe error handlingLars-Peter Clausen1-17/+26
Currently the child devices were not freed if the irq could not be requested. This patch restructures the function, that in case of an error all previously allocated resources are freed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Staticise __adp5520_ack_bits()Mark Brown1-1/+2
The function is not exported as the __ indicates. __ Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: fix undefined twl4030-power resconfig value checksAaro Koskinen1-3/+3
The code tries to skip values initialized with -1, but since the values are unsigned the comparison is always true. The patch eliminates the following compiler warnings: drivers/mfd/twl4030-power.c: In function 'twl4030_configure_resource': drivers/mfd/twl4030-power.c:338: warning: comparison is always true due to limited range of data type drivers/mfd/twl4030-power.c:358: warning: comparison is always true due to limited range of data type drivers/mfd/twl4030-power.c:363: warning: comparison is always true due to limited range of data type Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Add support for remapping twl4030-power power statesAmit Kucheria1-0/+36
The <RESOURCE>_REMAP register allows configuration of the <RESOURCE> in case of a sleep or off transition. Allow this property of resources to be configured (through twl4030_resconfig) and add code to parse these values to program the registers accordingly. Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Add comments for the twl4030-power register and bit layoutAmit Kucheria1-2/+10
Describe how the resource registers are laid out and the various bit-fields in them. Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: twl4030-power: Rename DEVGROUP to DEV_GRPAmit Kucheria1-8/+8
Stick to the names used in the reference manual Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Fix pcf50633-regulator drvdata usageLars-Peter Clausen2-2/+4
Currently the pcf50633-regulator driver data is set to the pcf50633 core structure, but the pcf50633-regulator remove handler assumes that it is set to the regulator device. This patch fixes the issue by accessing the pcf506533 core structure through its parent device and setting the driver data to the regulator device. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Use platform_device_add_data to set pcf50633 regulator platform dataLars-Peter Clausen1-1/+2
Platform devices allocated with platform_device_alloc should use platform_device_add_data to set the platform data, because kfree will be called on the platform_data when the device is released. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Fix memleak in pcf50633_client_dev_registerLars-Peter Clausen5-23/+7
Since platform_device_add_data copies the passed data, the allocated subdev_pdata is never freed. A simple fix would be to either free subdev_pdata or put it onto the stack. But since the pcf50633 child devices can rely on beeing children of the pcf50633 core device it's much more elegant to get access to pcf50633 core structure through that link. This allows to get completly rid of pcf5033_subdev_pdata. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Move pcf50633 messages to appropriate log levelsArnaud Patard1-2/+2
IRQs masking/unmasking should be less verbose. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Make pcf50633 suspend/resume belong to i2c_driverLars-Peter Clausen1-6/+6
When not using the i2c suspend/resume callbacks the i2c client resumed before the i2c master. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Disable unnecessary pcf50633 shutdown on lowsysPaul Fertser1-0/+3
On gta02 hardware revision A5 it can actually bring the system down during normal operating conditions so we disable it. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Convert WM835x IRQ handling to use a data tableMark Brown1-648/+369
Rather than open coding individual IRQs in each function which manipulates them store data for IRQs in a table which is then referenced in the users. This is a substantial code shrink and should be a performance win in cases where only a single IRQ goes off at once since instead of reading four of the second level IRQ registers for each interrupt we read only the sub-registers which have had an interrupt flagged. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Split wm8350 IRQ code into a separate fileMark Brown3-762/+812
In preparation for refactoring - it's over 700 lines of well-isolated code and having it in a file by itself makes things more managable. While we're at it make sure that we clean up the IRQ if we fail after acquiring it on init. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13input/keyboard: new driver for ADP5520 MFD PMICsMichael Hennerich3-0/+231
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Add ADP5520/ADP5501 driverMichael Hennerich3-0/+389
Base driver for Analog Devices ADP5520/ADP5501 MFD PMICs Subdevs: LCD Backlight : drivers/video/backlight/adp5520_bl.c LEDs : drivers/led/leds-adp5520.c GPIO : drivers/gpio/adp5520-gpio.c (ADP5520 only) Keys : drivers/input/keyboard/adp5520-keys.c (ADP5520 only) Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13gpio: adp5520: rename common defines and typosMichael Hennerich1-16/+20
The common adp5520 mfd defines were namespaced to avoid collisions, so update the define used in this driver accordingly. The structs were also renamed to fix a spelling typo. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13backlight: adp5520: rename common defines and typosMichael Hennerich1-53/+70
The common adp5520 mfd defines were namespaced to avoid collisions, so update the define used in this driver accordingly. The structs were also renamed to fix a spelling typo. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Fix 88PM8607 I2C dependencyHaojian Zhuang1-1/+1
88PM8607 depends on I2C and MFD_CORE. Since 88PM8607 is built-in kernel, it also requires that I2C and MFD_CORE are built-in kernel also. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Move asic3_remove to .devexit.textUwe Kleine-König1-1/+1
The function asic3_remove is used only wrapped by __devexit_p so define it using __devexit. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Add support for WM8320 PMICsMark Brown2-3/+162
The WM8320 is an integrated power management subsystem providing voltage regulators, RTC, watchdog and other functionality. The WM8320 is derived from the WM831x and therefore shares most of the driver code with the WM831x. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13gpiolib: Make WM831x GPIO count dynamicMark Brown2-3/+4
This supports future devices with fewer GPIOs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Refactor WM831x chip identificationMark Brown1-40/+18
Better support future device revisions by moving some of the output around and making the chip ID enumeration be the value expected in the ID register. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Don't abuse i2c_client.nameJean Delvare2-5/+0
The name field of struct i2c_client is for i2c-core's use, it should never be changed by the drivers themselves. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Fix ab4500 compilation warningsSamuel Ortiz1-1/+2
When building the driver as a module, module_exit was missing, and subsys_initcall_sync() is not defined. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: add AB4500 driverSrinidhi Kasagar3-0/+218
This adds core driver support for AB4500 mixed signal multimedia & power management chip. This connects to U8500 on the SSP (pl022) and exports read/write functions for the device to get access to this chip. This also registers the client devices and sets the parent. Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Reviewed-by: Mark Brown <broonie@sirena.org.uk> Reviewed-by: Jean-Christophe <plagnioj@jcrosoft.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-13mfd: Add 88PM8607 driverHaojian Zhuang3-0/+313
This adds a core driver for 88PM8607 found in Marvell DKB development platform. This driver is a proxy for all accesses to 88PM8607 sub-drivers which will be merged on top of this one, RTC, regulators, battery and so on. This chip is manufactured by Marvell. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-12-12Merge branch 'ixp4xx' of ↵Linus Torvalds2-1/+8
git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6 * 'ixp4xx' of git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6: IXP4xx: GTWX5715 platform only has two PCI IRQ lines, not four. IXP4xx: Introduce IXP4XX_GPIO_IRQ(n) macro and convert IXP4xx platform files. IXP4xx: move Gemtek GTWX5715 platform macros to the platform code. IXP4xx: Remove unused Motorola PrPMC1100 platform macros. IXP4xx: move FSG platform macros to the platform code. IXP4xx: move DSM G600 platform macros to the platform code. IXP4xx: move NAS100D platform macros to the platform code. IXP4xx: move NSLU2 platform macros to the platform code. IXP4xx: move Coyote platform macros to the platform code. IXP4xx: move AVILA platform macros to the platform code. IXP4xx: move IXDP425 platform macros to the platform code. IXP4xx: Extend PCI MMIO indirect address space to 1 GB. IXP4xx: Fix compilation failure with CONFIG_IXP4XX_INDIRECT_PCI. IXP4xx: Drop "__ixp4xx_" prefix from in/out/ioread/iowrite functions for clarity. IXP4xx: Rename indirect MMIO primitives from __ixp4xx_* to __indirect_*. IXP4xx: Ensure index is positive in irq_to_gpio() and npe_request(). ARM: fix insl() and outsl() endianness on IXP4xx architecture. IXP4xx: Fix normally-disabled debugging text in drivers/net/arm/ixp4xx_eth.c. IXP4xx: change the timer base frequency to 66.666000 MHz.
2009-12-12tty: Fix BKL taken under a spinlock bug introduced in the BKL splitAlan Cox1-2/+0
The fasync path takes the BKL (it probably doesn't need to in fact) while holding the file_list spinlock. You can't do that with the kernel lock: it causes lock inversions and deadlocks. Leave the BKL over that bit for the moment. Identified by AKPM. Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-and-Tested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-12Merge branch 'next' of ↵Linus Torvalds29-867/+3247
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (151 commits) powerpc: Fix usage of 64-bit instruction in 32-bit altivec code MAINTAINERS: Add PowerPC patterns powerpc/pseries: Track previous CPPR values to correctly EOI interrupts powerpc/pseries: Correct pseries/dlpar.c build break without CONFIG_SMP powerpc: Make "intspec" pointers in irq_host->xlate() const powerpc/8xx: DTLB Miss cleanup powerpc/8xx: Remove DIRTY pte handling in DTLB Error. powerpc/8xx: Start using dcbX instructions in various copy routines powerpc/8xx: Restore _PAGE_WRITETHRU powerpc/8xx: Add missing Guarded setting in DTLB Error. powerpc/8xx: Fixup DAR from buggy dcbX instructions. powerpc/8xx: Tag DAR with 0x00f0 to catch buggy instructions. powerpc/8xx: Update TLB asm so it behaves as linux mm expects. powerpc/8xx: Invalidate non present TLBs powerpc/pseries: Serialize cpu hotplug operations during deactivate Vs deallocate pseries/pseries: Add code to online/offline CPUs of a DLPAR node powerpc: stop_this_cpu: remove the cpu from the online map. powerpc/pseries: Add kernel based CPU DLPAR handling sysfs/cpu: Add probe/release files powerpc/pseries: Kernel DLPAR Infrastructure ...
2009-12-12Merge branch 'omap-for-linus' of ↵Linus Torvalds2-47/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (75 commits) omap3: Fix OMAP35XX_REV macros omap: serial: fix non-empty uart fifo read abort omap3: Zoom2/3: Update hsmmc board config params omap3 : Enable TWL4030 Keypad for Zoom2 and Zoom3 boards omap3: id code detection 3525 vs 3515 omap3: rx51: Use wl1251 in SPI mode 3 omap3: zoom2/3: make MMC slot work again omap1: htcherald: Update defconfig to include mux support omap1: LCD_DMA: Use some define rather than a hexadecimal omap: header: remove unused data-type omap: arch/arm/plat-omap/devices.c - sort alphabetically omap: Correcting GPMC_CONFIG1_DEVICETYPE_NAND OMAP3: serial - allow platforms specify which UARTs to initialize omap3: cm-t35: add mux initialization OMAP4: Sync up omap4430 defconfig OMAP4: Remove the secondary wait loop OMAP4: AuxCoreBoot registers only accessible in secure mode OMAP4: Fix SRAM base and size OMAP4: Fix cpu detection omap3: pandora: board file updates for .33 ...
2009-12-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds5-14/+25
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: be2net: fix error in rx completion processing. igbvf: avoid reset storms due to mailbox issues igb: fix handling of mailbox collisions between PF/VF usb: remove rare pm primitive for conversion to new API
2009-12-11be2net: fix error in rx completion processing.Ajit Khaparde1-2/+2
There are certain skews of the NIC which have multiple bits set in adapter->cap. Use & instead of == to process rx completions. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-11igbvf: avoid reset storms due to mailbox issuesAlexander Duyck2-1/+8
From: Alexander Duyck <alexander.h.duyck@intel.com> This change makes it so that reset/interrupt storms can be avoided when there are mailbox issues. The new behavior is to only allow the device to trigger mailbox related resets only once every 10 seconds. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-11igb: fix handling of mailbox collisions between PF/VFAlexander Duyck1-9/+13
This patch changes the handling of collisions between the use of the PF/VF sides of the mailbox. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-11usb: remove rare pm primitive for conversion to new APIOliver Neukum1-2/+2
This patch removes a rare use of the USB power management API which won't be supported after the conversion to the new generic runtime power management framework. Functionality is not altered. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds41-401/+1346
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (75 commits) net: Handle NETREG_UNINITIALIZED devices correctly can: add the driver for Analog Devices Blackfin on-chip CAN controllers xfrm: Fix truncation length of authentication algorithms installed via PF_KEY net: use compat helper functions in compat_sys_recvmmsg net: fix compat_sys_recvmmsg parameter type cxgb3: Fixing EEH handlers cnic: Zero out status block and Event Queue indices. cnic: Send delete command when shutting down iSCSI ring. net: smc91x: Fix up type mismatch in smc_drv_resume(). smc91x: fix unused flags warnings on UP systems MAINTAINERS: Transfering maintainership of cdc-ether net: Add missing TST_CFG_WRITE bits around sky2_pci_write net: Fix Yukon-2 Optima TCP offload setup net: niu uses crc32, so select CRC32 wireless: update old static regulatory domain rules mac80211: Revert 'Use correct sign for mesh active path refresh' mac80211: Fixed bug in mesh portal paths net/mac80211: Correct size given to memset b43: Remove reset after fatal DMA error rtl8187: add radio led and fix warnings on suspend ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 10:34:29 +0000