summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2005-11-02Merge Paulus' treeStephen Rothwell124-138/+218
2005-11-02Merge iSeries include file moveStephen Rothwell6-25/+25
2005-11-02Merge ../linux-2.6Paul Mackerras124-138/+218
2005-11-02merge filename and modify references to iseries/vio.hKelly Daly5-6/+6
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02merge filename and modify references to iSeries/mf.hKelly Daly1-1/+1
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02powerpc: exclude powerbook sleep code with CONFIG_PPC64 and CONFIG_PMPaul Mackerras1-13/+16
We were getting powerbook sleep code included, and giving compile errors, with CONFIG_PM=y on a 64-bit build. This excludes that code so the kernel will compile. One day BenH will implement on sleep on the G5... Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02merge filename and modify references to iseries/hv_types.hKelly Daly4-4/+4
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02merge filename and modify references to iseries/hv_lp_event.hKelly Daly6-6/+6
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02merge filename and modify reference to iseries/hv_lp_config.hKelly Daly5-5/+5
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02merge filename and modify references to iseries/hv_call_event.hKelly Daly2-2/+2
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-01merge filename and modify references to iseries/hv_call.hKelly Daly1-1/+1
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-10-31Don't touch USB controller IO registers when they are disabledLinus Torvalds1-0/+23
The USB "handoff" code is an early PCI quirk to make sure we own the USB controller (as opposed to the BIOS/SMM). But if the controller isn't even enabled yet, don't try to access it. Acked-by: Paul Mackerras <paulus@samba.org> (who had an alternate patch) Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31[PATCH] revert ide-scsi highmem cleanupAndrew Morton1-12/+32
Jeff Garzik <jgarzik@pobox.com> points out that this was wrong: we need to disable local interrupts while holding KM_IRQ0 due to IRQ sharing. And holding interrupts off during a big PIO opration is expensive, so we only want to do that if we know the page was highmem. So revert commit 17fd47ab4d33e764216b87006d8118fa050b4c92 Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31[PATCH] i386: CONFIG_PC removalArthur Othieno2-3/+3
CONFIG_PC is left-over cruft after the introduction of CONFIG_X86_PC with the subarch split. Remove it, and fixup the remaining users to depend on CONFIG_X86_PC instead. Signed-off-by: Arthur Othieno <a.othieno@bluewin.ch> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31[PATCH] noop-iosched: avoid corrupted request mergingJens Axboe1-0/+1
Tejun Heo notes: "I'm currently debugging this. The problem is that we are using the generic dispatch queue directly in the noop sched and merging is NOT allowed on dispatch queues but generic handling of last_merge tries to merge requests. I'm still trying to verify this, so I'll be back with results soon." In the meantime, disable merging for noop by setting REQ_NOMERGE in elevator_noop_add_request(). Eventually, we should add a noop_list and do the dispatching like in the other io schedulers. Merging is still beneficial for noop (and it has always done it). Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31[PATCH] Fix on-the-fly switch from cfq i/o schedulerJens Axboe1-3/+1
Don't clear ->elevator_data on exit, if we are switching queues we are overwriting the data of the new io scheduler. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31Merge branch 'upstream-linus' of ↵Linus Torvalds3-51/+18
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2005-10-31Merge master.kernel.org:/home/rmk/linux-2.6-drvmodelLinus Torvalds110-66/+132
Manual #include fixups for clashes - there may be some unnecessary
2005-10-31Input: adbhid - fix OOPS introduced by dynalloc conversionPaul Mackerras1-0/+1
The problem is that adbhid[]->input is NULL, so the kernel oopses with a null pointer dereference as soon as a key is pressed. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-10-31Input: lkkbd - fix debug message in lkkbd_interrupt()Dmitry Torokhov1-1/+1
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-10-31Input: pcspkr - fix setting name and phys for the deviceDmitry Torokhov1-1/+1
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-10-31Input: fix input_dev registration messageDmitry Torokhov1-1/+1
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-10-31Input: evdev - allow querying SW state from compat ioctlDmitry Torokhov1-0/+3
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-10-31Input: evdev - allow querying EV_SW bits from compat_ioctlDmitry Torokhov1-0/+1
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-10-30[libata] locking rewrite (== fix)Jeff Garzik2-3/+8
A lot of power packed into a little patch. This change eliminates the sharing between our controller-wide spinlock and the SCSI core's Scsi_Host lock. As the locking in libata was already highly compartmentalized, always referencing our own lock, and never scsi_host::host_lock. As a side effect, this change eliminates a deadlock from calling scsi_finish_command() while inside our spinlock.
2005-10-30[libata] ata_tf_to_host cleanupsJeff Garzik2-48/+10
Integrate ata_exec() and ata_tf_to_host() into their only caller, ata_bus_edd(). Rename ata_tf_to_host_nolock() to ata_tf_to_host(). This makes locking a bit easier to review, and may help pave the way for future changes.
2005-10-31Merge ../linux-2.6 by handPaul Mackerras951-29865/+42625
2005-10-30Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds1-2/+1
2005-10-30Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds6-49/+158
2005-10-30Merge master.kernel.org:/home/rmk/linux-2.6-mmcLinus Torvalds2-3/+8
2005-10-30[PATCH] fix missing includesTim Schmielau123-15/+220
I recently picked up my older work to remove unnecessary #includes of sched.h, starting from a patch by Dave Jones to not include sched.h from module.h. This reduces the number of indirect includes of sched.h by ~300. Another ~400 pointless direct includes can be removed after this disentangling (patch to follow later). However, quite a few indirect includes need to be fixed up for this. In order to feed the patches through -mm with as little disturbance as possible, I've split out the fixes I accumulated up to now (complete for i386 and x86_64, more archs to follow later) and post them before the real patch. This way this large part of the patch is kept simple with only adding #includes, and all hunks are independent of each other. So if any hunk rejects or gets in the way of other patches, just drop it. My scripts will pick it up again in the next round. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: hpet driver cleanupsRandy Dunlap1-30/+35
- Use kzalloc() instead of kmalloc + memset. - Clean/fix some printk's. - Use NULL for pointers instead of 0. - Combine hpet busy searching locations into a function call. Signed-off-by: Randy Dunlap <randy_d_dunlap@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: use HPET physical addresses for dup. detectionRandy Dunlap1-5/+15
- Use HPET physical address to detect duplicates, not logical addresses. Using logical (mapped) addresses fails to detect duplicates because ioremap() returns a new mapped address each time. - iounmap() regions when duplicate/busy areas are found. Signed-off-by: Randy Dunlap <randy_d_dunlap@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: allow HPET FIXED_MEM32 resource typeRandy Dunlap1-0/+17
Allow the ACPI HPET description table to use a resource type of FIXED_MEM32 for the HPET reource. Use the fixed resoure size of 1 KB for the HPET resource as per the HPET spec. Signed-off-by: Randy Dunlap <randy_d_dunlap@linux.intel.com> Acked-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: simplify initialization messageClemens Ladisch1-5/+4
When booting, display the timer frequency in Hertz instead of as tick length in nanoseconds. Apart from saving a local variable, this makes the message more easily comprehensible. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: remove superfluous indirectionsClemens Ladisch1-2/+2
In the hpet_ioctl_common() function, devp->hd_hpets is already cached in the hpetp variable, so we can use just that. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: fix access to multiple HPET devicesClemens Ladisch1-2/+2
Fix two instances where a function would access the first HPET device instead of the current one. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: fix uninitialized variable in hpet_register()Clemens Ladisch1-0/+2
Clear the ht_opaque field in the hpet_register() function before searching for a free timer to prevent the function from incorrectly assuming that the search succeeded afterwards. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: fix division by zero in HPET_INFOClemens Ladisch1-2/+5
Fix a division by zero that happened when the HPET_INFO ioctl was called before a timer frequency had been set. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: fix HPET_INFO calls from kernel spaceClemens Ladisch1-2/+6
Fix a wrong memory access in hpet_ioctl_common(). It was not possible to use the HPET_INFO ioctl from kernel space because it always called copy_to_user(). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: allow shared interruptsClemens Ladisch1-7/+21
This patch adds support for shared HPET interrupts. The driver previously acknowledged interrupts for both edge and level interrupts, but didn't actually allow a shared interrupt in the latter case. We use a new per-timer flag to save whether the timer's interrupt might be shared, and use it to do the processing required for level interrupts only if necessary. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Acked-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: allow non-power-of-two frequenciesClemens Ladisch1-1/+1
It was only the RTC hardware that restricted interrupt frequencies to a power of two. There is no reason to take over this restriction into the HPET driver, so remove the offending check. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Acked-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: remove superfluous register readsClemens Ladisch1-4/+0
This patch removes several reads of a timer's config register that serve no purpose whatsoever. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Acked-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: remove unused variableClemens Ladisch1-3/+2
The variable hpet_ntimer is never read, so remove it. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Acked-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] HPET: make frequency calculations 32 bit safeClemens Ladisch1-13/+19
On 32-bit architectures, the multiplication in the argument for hpet_time_div() often overflows. In the typical case of a 14.32 MHz timer, this happens when the desired frequency exceeds 61 Hz. To avoid this multiplication, we can precompute and store the hardware timer frequency, instead of the period, in the device structure, which leaves us with a simple division when computing the number of timer ticks. As a side effect, this also removes a theoretical bug where the timer interpolator's frequency would be computed as a 32-bit value even if the HPET frequency is greater than 2^32 Hz (the HPET spec allows up to 10 GHz). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet: disallow zero interrupt frequencyClemens Ladisch1-1/+4
Disallow setting an interrupt frequency of zero (which would result in a division by zero), and disallow enabling the interrupt when the frequency hasn't yet been set (which would use an interrupt period of zero). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] sparse cleanups: NULL pointers, C99 struct init.Randy Dunlap6-11/+11
Convert most of the remaining "Using plain integer as NULL pointer" sparse warnings to use NULL. (Not duplicating patches that are already in -mm, -bird, or -kj.) Convert isdn driver struct initializer to use C99 syntax. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] tpm-tidiesAndrew Morton3-37/+23
- Various whitespace fixes - Use kzalloc() Acked-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] Infineon TPM: move infineon driver off pci_devMarcel Selhorst1-98/+59
Move the Infineon TPM driver off pci device and makes it a pure pnp-driver. It includes pnp-port validation and region requesting. Signed-off-by: Marcel Selhorst <selhorst@crypto.rub.de> Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] tpm: move nsc driver off pci_devKylene Jo Hall1-67/+77
This patch changes the nsc driver from a pci driver to a platform driver. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 19:40:33 +0000