summaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)AuthorFilesLines
2012-06-01pinctrl-nomadik: Allow Device Tree driver probingLee Jones1-1/+19
The Nomadik GPIO controller now relies on Nomadik pinctrl, however the pinctrl driver is not currently started by any ux500 platform. This is requred or GPIOs do not work at all. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-26Merge tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds6-102/+4451
Pull arm-soc: soc specific changes (part 2) from Olof Johansson: "This adds support for the spear13xx platform, which has first been under review a long time ago and finally been completed after generic spear work has gone into the clock, dt and pinctrl branches. Also a number of updates for the samsung socs are part of this branch." Fix up trivial conflicts in drivers/gpio/gpio-samsung.c that look much worse than they are: the exonys5 init code was refactored in commit fd454997d687 ("gpio: samsung: refactor gpiolib init for exynos4/5"), and then commit f10590c9836c ("ARM: EXYNOS: add GPC4 bank instance") added a new gpio chip define and did tiny updates to the init code. So the conflict diff looks like hell, but it's actually a fairly simple change. * tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits) ARM: exynos: fix building with CONFIG_OF disabled ARM: EXYNOS: Add AUXDATA for i2c controllers ARM: dts: Update device tree source files for EXYNOS5250 ARM: EXYNOS: Add device tree support for interrupt combiner ARM: EXYNOS: Add irq_domain support for interrupt combiner ARM: EXYNOS: Remove a new bus_type instance for EXYNOS5 ARM: EXYNOS: update irqs for EXYNOS5250 SoC ARM: EXYNOS: Add pre-divider and fout mux clocks for bpll and mpll ARM: EXYNOS: add GPC4 bank instance ARM: EXYNOS: Redefine IRQ_MCT_L0,1 definition ARM: EXYNOS: Modify the GIC physical address for static io-mapping ARM: EXYNOS: Add watchdog timer clock instance pinctrl: SPEAr1310: Fix pin numbers for clcd_high_res SPEAr: Update MAINTAINERS and Documentation SPEAr13xx: Add defconfig SPEAr13xx: Add compilation support SPEAr13xx: Add dts and dtsi files pinctrl: Add SPEAr13xx pinctrl drivers pinctrl: SPEAr: Create macro for declaring GPIO PINS SPEAr13xx: Add common clock framework support ...
2012-05-22Merge tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds18-126/+8767
Pull arm soc-specific pinctrl changes from Olof Johansson: "With this, five platforms are moving to the relatively new pinctrl subsystem for their pin management, replacing the older soc specific in-kernel interfaces with common code. There is quite a bit of net addition of code for each platform being added to the pinctrl subsystem. But the payback comes later when adding new boards can be done by only providing new device trees instead." Fix up trivial conflicts in arch/arm/mach-ux500/{Makefile,board-mop500.c} * tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (61 commits) mtd: nand: gpmi: fix compile error caused by pinctrl call ARM: PRIMA2: select PINCTRL and PINCTRL_SIRF in Kconfig ARM: nomadik: enable PINCTRL_NOMADIK where needed ARM: mxs: enable pinctrl support video: mxsfb: adopt pinctrl support ASoC: mxs-saif: adopt pinctrl support i2c: mxs: adopt pinctrl support mtd: nand: gpmi: adopt pinctrl support mmc: mxs-mmc: adopt pinctrl support serial: mxs-auart: adopt pinctrl support serial: amba-pl011: adopt pinctrl support spi/imx: adopt pinctrl support i2c: imx: adopt pinctrl support can: flexcan: adopt pinctrl support net: fec: adopt pinctrl support ARM: ux500: switch MSP to using pinctrl for pins ARM: ux500: alter MSP registration to return a device pointer ARM: ux500: switch to using pinctrl for uart0 ARM: ux500: delete custom pin control system ARM: ux500: switch over to Nomadik pinctrl driver ...
2012-05-20pinctrl: pinctrl-imx: add imx51 pinctrl driverDong Aisheng3-0/+1331
ChangeLog v1->v2: * change PIN_FUNC_ID base in binding doc to 0 from 1. Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-20pinctrl: pinctrl-imx: add imx53 pinctrl driverDong Aisheng3-0/+1658
ChangeLog v1->v2: * change PIN_FUNC_ID base in binding doc to 0 from 1. Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-15ARM: nomadik: enable PINCTRL_NOMADIK where neededArnd Bergmann1-1/+1
The nomadik gpio code has been converted to pinctrl, but the nomadik platform still expects the old code to be present. Change it to use the new one instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-15pinctrl: pinctrl-pxa3xx: remove empty pinmux disable functionDong Aisheng1-6/+0
Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-15pinctrl: pinctrl-mxs: remove empty pinmux disable functionDong Aisheng1-7/+0
Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-15pinctrl: pinctrl-imx: remove empty pinmux disable functionDong Aisheng1-7/+0
Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-15pinctrl: make pinmux disable function optionalDong Aisheng1-3/+3
Some SoCs may not have pinmux disable function in HW. Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-15pinctrl: a minor error checking improvement for pinconfDong Aisheng1-2/+2
Also checking invalid num_configs when validate the pinconf map. Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-14pinctrl: SPEAr1310: Fix pin numbers for clcd_high_resViresh Kumar1-1/+1
Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-14pinctrl: Add SPEAr13xx pinctrl driversViresh Kumar5-0/+4345
This adds pinctrl driver for SPEAr13xx family. SPEAr13xx family supports two machines: SPEAr1310 and SPEAr1340. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-14pinctrl: SPEAr: Create macro for declaring GPIO PINSViresh Kumar2-102/+106
Same GPIO pins declarations would be required for other SoCs and that will be a lot of lines of code. Its better to create common macros for it. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-14pinctrl: mxs: skip gpio nodes for group creationShawn Guo1-0/+7
The recent added mxs gpio device tree bindings require gpio nodes defined under pinctrl node too. The pinctrl-mxs driver should skip these node for group parsing and creating. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-14pinctrl: mxs: create group for pin config nodeShawn Guo1-24/+44
The initial mxs pinctrl support, commit 1772311 (pinctrl: add pinctrl-mxs support) skipped creating group from device tree pin config node. Add it to get pin config node work for client device. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-12Merge tag 'ux500-gpio-pins-for-3.5' of ↵Olof Johansson5-0/+2726
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/pinctrl ux500 GPIO and pinctrl changes for kernel 3.5 * tag 'ux500-gpio-pins-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: ux500: switch MSP to using pinctrl for pins ARM: ux500: alter MSP registration to return a device pointer ARM: ux500: switch to using pinctrl for uart0 ARM: ux500: delete custom pin control system ARM: ux500: switch over to Nomadik pinctrl driver pinctrl: add sleep state definition pinctrl/nomadik: implement pin configuration pinctrl/nomadik: implement pin multiplexing pinctrl/nomadik: reuse GPIO debug function for pins pinctrl/nomadik: break out single GPIO debug function pinctrl/nomadik: basic Nomadik pinctrl interface pinctrl/nomadik: !CONFIG_OF build error gpio: move the Nomadik GPIO driver to pinctrl Context conflicts resolved in drivers/pinctrl/Kconfig and drivers/pinctrl/Makefile. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-05-12Merge branch 'spear/pinctrl' into next/pinctrlArnd Bergmann12-44/+4517
* spear/pinctrl: pinctrl: (cosmetic) fix two entries in DocBook comments pinctrl: add more info to error msgs in pin_request CLKDEV: provide helpers for common clock framework pinctrl: add pinctrl-mxs support pinctrl: pinctrl-imx: add imx6q pinctrl driver pinctrl: pinctrl-imx: add imx pinctrl core driver dt: add of_get_child_count helper function pinctrl: support gpio request deferred probing pinctrl: add pinctrl_provide_dummies interface for platforms to use pinctrl: enhance reporting of errors when loading from DT pinctrl: add kerneldoc for pinctrl_ops device tree functions pinctrl: propagate map validation errors pinctrl: fix dangling comment pinctrl: fix signed vs unsigned conditionals inside pinmux_map_to_setting ARM: 7392/1: CLKDEV: Optimize clk_find() ARM: 7376/1: clkdev: Implement managed clk_get() This just adds more dependencies that are required in order not to break the spear pinctrl support. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-12Merge branches 'depends/pinctrl/devel' and 'depends/rmk/clkdev' into ↵Arnd Bergmann22-177/+5301
spear/pinctrl The spear/pinctrl branch has hard dependencies on both the pinctrl branch and the clkdev branch. We merge those here to fix it up without having to rebase a branch that has been pulled into other stable branches already. Conflicts: Documentation/driver-model/devres.txt Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-11pinctrl/nomadik: implement pin configurationLinus Walleij2-0/+114
This implements the pin configuration interface for the Nomadik pin controller. As part of the exercise we add a bit in the pin_cfg_t for the Nomadik pinctrl driver that indicates if the pin should be forced into GPIO mode. This is not done to go behind the back of the GPIO subsystem, but to ensure that default modes can be set by hogs on boot and system suspend/resume states. It was used implicitly by the old code defining all config settings and modes in a single config word but we now have a split between pinmux and pinconf leading to the need to have this. We also add a bit for explicitly setting sleepmode of the pin. This was previously handled by custom calls with the _sleep() suffix, but we now have one single interface into the configuration so we replace this with a bit indicating that the pin shall be configured into sleep mode. Some of the configuration can be refactored later to use less custom fields on the pin_cfg_t but we are currently leaving the old function calls in place so we stay compatible. ChangeLog v1->v2: - Drop a hunk changing pinmuxing for GPIO and move it over to the preceding pinmux patch. Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-11pinctrl/nomadik: implement pin multiplexingLinus Walleij4-2/+353
Implements basic pinmux for the Nomadik pin controller. The plan is to split the existing singular pin config interface nmk_config_pin(), nmk_config_pins(), that will configure muxing and other settings at the same time, into two interfaces by splitting the code in pinmux and pinctrl and eventually deleting the old interface and its helper functions when all users are gone. nmk_gpio_set_mode() and nmk_gpio_get_mode() are two older interfaces for just configuring muxing/altfunctions that will also be replaced in the end. We take some extra care to handle the glitch-avoidance here, but it is simpler now since there is only one altsetting per pingroup so we know immediately if we need to avoid altfunc C glitches for a certain group. As part of the makeover implement the .request() and .free() calls on the GPIO chips and have them call back into the pinctrl layer to reserve GPIOs. ChangeLog v1->v2: - Rebased on pinctrl-mergebase-20120418 so we get the latest driver infrastructure where function count is done by a fixed value and we can drop a few range checks since this is now handled by the core. - Include a GPIO muxing hunk erroneously part of the pin config patch. Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-11pinctrl/nomadik: reuse GPIO debug function for pinsLinus Walleij1-1/+27
Since all pins we can control are GPIOs, match a GPIO range to each pin in the debug function and call into the GPIO debug print function to have the per-pin information. Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-11pinctrl/nomadik: break out single GPIO debug functionLinus Walleij1-48/+57
Break out the code displaying the status of a single pin so we can use the same code in the pinctrl debug function. Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-11pinctrl/nomadik: basic Nomadik pinctrl interfaceLinus Walleij5-2/+919
This adds a scratch pin control interface to the Nomadik pinctrl driver, and defines the pins and groups in the DB8500 ASIC. We define GPIO ranges to cover the pins exposed. The DB8500 has more pins than this but we restrict the driver to the pins that can be controlled from the combined GPIO and pin control hardware to begin with. ChangeLog v1->v2: - Base on the latest pinctrl development from pinctrl-mergebase-20120418 so we can get rid of legacy group count mechanism. Also drop the range checks for group index, this is handled by the core now. Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-11pinctrl/nomadik: !CONFIG_OF build errorArnd Bergmann1-0/+2
a60b57e "drivers/gpio: gpio-nomadik: Add support for irqdomains" broke building with CONFIG_OF_GPIO disabled. Without this patch, building nhk8815_defconfig results in: /home/arnd/linux-arm/drivers/gpio/gpio-nomadik.c: In function 'nmk_gpio_probe': /home/arnd/linux-arm/drivers/gpio/gpio-nomadik.c:1238:6: error: 'struct gpio_chip' has no member named 'of_node' make[3]: *** [drivers/gpio/gpio-nomadik.o] Error 1 make[2]: *** [drivers/gpio] Error 2 make[2]: *** Waiting for unfinished jobs.... make[1]: *** [drivers] Error 2 make[1]: *** Waiting for unfinished jobs.... make: *** [sub-make] Error 2 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-11gpio: move the Nomadik GPIO driver to pinctrlLinus Walleij2-0/+1307
I'm moving this driver over to the pinctrl subsystem to convert the custom pin mux/config scheme over to use pinctrl. Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-09Merge branch 'for-3.5/gpio-pinmux' of ↵Olof Johansson4-126/+213
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/pinctrl By Stephen Warren via Stephen Warren * 'for-3.5/gpio-pinmux' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: pinctrl: tegra: error reporting cleanup pinctrl: tegra: debugfs enhancements pinctrl: tegra: refactor probe handling ARM: dt: tegra20: add pinmux to device tree ARM: dt: tegra cardhu: add pinmux to device tree ARM: tegra: Remove pre-pinctrl pinmux driver ARM: tegra: Switch to new pinctrl driver gpio: tegra: Hide tegra_gpio_enable/disable() ARM: tegra: seaboard: Don't gpio_request() ISL29018_IRQ gpio: tegra: configure pins during irq_set_type ARM: tegra: Remove VBUS_GPIO handling from board files usb: ehci-tegra: Add vbus_gpio to platform data
2012-05-09Merge tag 'pinctrl-mergebase-20120418' of ↵Olof Johansson15-132/+766
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl into next/pinctrl By Stephen Warren (12) and others via Linus Walleij * tag 'pinctrl-mergebase-20120418' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (24 commits) pinctrl: show pin name for pingroups in sysfs pinctrl: show pin name when request pins pinctrl: implement devm_pinctrl_get()/put() pinctrl: a minor fix of pin config debug information pinctrl: pinconf: fix compilation error if PINCONF is not selected pinctrl: allow pctldevs to decode pin config in debugfs pinctrl: ifdef CONFIG_DEBUG_FS cleanup pinctrl: mark non-EXPERIMENTAL pinctrl: tegra: Add complete device tree support dt: Document Tegra20/30 pinctrl binding dt: Move Tegra20 pin mux binding into new pinctrl directory dt: pinctrl: Document device tree binding dt: add property iteration helpers pinctrl: implement pinctrl deferred probing pinctrl: add some error checking for user interfaces pinctrl: fix pinmux_check_ops error checking pinctrl: replace list_*() with get_*_count() pinctrl: mark const init data with __initconst instead of __initdata Documentation: pinctrl: add missing spi0_0 grp in example pinctrl: fix build when CONFIG_OF && !CONFIG_PINCTRL ... Resolved conflicts in drivers/pinctrl/core.c due to same patch being applied in two branches. Signed-off-by: Olof Johansson <olof@lixom.net>
2012-05-07pinctrl: add more info to error msgs in pin_requestStephen Warren1-6/+8
Additionally print which pin the request failed for, which entity already claimed it, and what entity was trying to claim it. Remove duplicate device name from a debug message. Clean up some indentation. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-02pinctrl: add pinctrl-mxs supportShawn Guo6-0/+1343
Add pinctrl support for Freescale MXS SoCs, i.MX23 and i.MX28. The driver supports device tree probe only. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-02pinctrl: pinctrl-imx: add imx6q pinctrl driverDong Aisheng3-0/+2340
Acked-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-02pinctrl: pinctrl-imx: add imx pinctrl core driverDong Aisheng4-0/+739
The driver has mux and config support while the gpio is still not supported. For select input setting, the driver will handle it internally and do not need user to take care of it. The pinctrl-imx core driver will parse the dts file and dynamically create the pinmux functions and groups. Each IMX SoC pinctrl driver should register pins with a pin register map including mux register and config register and select input map to core for proper operations. Acked-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-02pinctrl: support gpio request deferred probingDong Aisheng1-3/+4
As pinctrl handles, it may be possible the pinctrl gpio ranges are still not got registered when user call pinctrl_gpio_request. Thus, add defer support for it too. Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-30Merge branch 'ux500-gpio-pins-for-arm-soc' of ↵Arnd Bergmann1-4/+21
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/gpio Linus Walleij <linus.walleij@linaro.org> writes: This is a pull request for the GPIO and pin control stuff accumulated in the ST-Ericsson tree. Here we have: - Improvements and fixes and a custom pin config API from Rabin Vincent - Device Tree bindings from Lee Jones - Some accumulated patches by yours truly. - A MSP platform data init patch from Ola Lilja that is merged here due to dependency on pin config work. It is to be used with work being worked on in parallel in the ALSA SoC subsystem. If you wonder about the custom pin config implementation this is to be used as a transition base as I am rewriting the driver to use pinctrl. Expect a final pull request on top of this one that will move the ux500 over to pinctrl. * 'ux500-gpio-pins-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: ux500: Add support for MSP I2S-devices drivers/gpio: gpio-nomadik: Add support for irqdomains drivers/gpio: gpio-nomadik: Apply Device Tree bindings ARM: ux500: update pin handling ARM: ux500: implement pin API ARM: ux500: remove a bunch of internal pull-ups plat-nomadik: new sleep mode pincfg macros gpio/nomadik: use ioremap() instead of static mappings gpio/nomadik: support low EMI mode gpio/nomadik: fix spurious interrupts with SKE gpio/nomadik: cache [rf]w?imsc gpio/nomadik: don't set SLPM to 1 for non-wakeup pins Also includes an update to v3.4-rc4. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-04-26pinctrl: add pinctrl_provide_dummies interface for platforms to useDong Aisheng1-2/+27
Add a interface pinctrl_provide_dummies for platform to indicate whether it needs use pinctrl dummy state. ChangeLog v3->v4: * remove dummy gpio support in pinctrl subsystem. Let gpio driver decide whether it wants to use pinctrl gpio mux function. ChangeLog v2->v3: * Also changed the missed pinctrl gpio APIs in v1. ChangeLog v1->v2: * Based on sascha's suggestion, drop using kconfig since it will hide pinctrl errors on all other boards. See: https://lkml.org/lkml/2012/4/18/282 It seemed both Linus and Stephen agreed with this way, so i'm ok with it too. * Add dummy gpio support. pinctrl gpio in the same situation as state. * Patch name changed. Original is pinctrl: handle dummy state in core. * Split removing old dt dummy interface into a separate patch Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-26pinctrl: enhance reporting of errors when loading from DTJohn Crispin3-27/+49
There are a few places in the api where the code simply returns -EINVAL when it finds an error. An example is pinmux_map_to_setting() which now reports an error if we try to match a group with a function that it does not support. The reporting of errors in pinconf_check_ops and pinmux_check_ops now has the same style and is located inside the according functions and not the calling code. When the map is found in the DT but the default state can not be selected we get an error to know that the code at least tried. The patch also removes a stray word from one comment and a "->" from another for the sake of consistency. Finally we replace a few pr_err/debug() calls with dev_err/dbg(). Thanks go to Stephen Warren for reviewing the patch and enhancing the reporting inside pinmux_map_to_setting(). Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-26pinctrl: propagate map validation errorsStephen Warren1-2/+2
pinctrl_register_map() was returning early if pinmux_validate_map() or pinconf_validate_map() failed, but was not actually returning the error code. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-25pinctrl: tegra: error reporting cleanupStephen Warren1-26/+55
Print an explicit error message in various failure cases to allow easier diagnosis. WARN_ON() some internal failures that users/clients shouldn't be able to trigger. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-24pinctrl: fix signed vs unsigned conditionals inside pinmux_map_to_settingJohn Crispin1-7/+8
pinmux_map_to_setting() uses setting->data.mux.func/group to store the return code of pinmux_func_name_to_selector/pinctrl_get_group_selector(). However, struct pinctrl_setting_mux defines these elements as unsigned, resulting in all error codes getting lost. The conditionals following the assignments will always evaluate to false thus breaking the error paths. This bug can be triggered by loading a pinmux group map from the devicetree with an invalid function/group string. Signed-off-by: John Crispin <blogic@openwrt.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-22pinctrl: Add SPEAr3xx pinctrl driversViresh Kumar7-0/+5311
This adds pinctrl driver for SPEAr3xx family. SPEAr3xx family supports three families: SPEAr300, SPEAr310 and SPEAr320. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Stephen Warren <swarren@wwwdotorg.org>
2012-04-22pinctrl: Add SPEAr pinctrl driversViresh Kumar6-0/+517
This adds pinctrl driver for SPEAr platform. It also updates MAINTAINERS file for SPEAr pinctrl drivers. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Stephen Warren <swarren@wwwdotorg.org>
2012-04-18pinctrl: tegra: debugfs enhancementsStephen Warren1-6/+69
* Only provide debugfs-relates ops when CONFIG_DEBUG_FS is enabled. * Implement pin_config_group_dbg_show op. * Implement pin_config_config_dbg_show op. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-18pinctrl: tegra: refactor probe handlingStephen Warren4-94/+89
Rather than having a single tegra-pinctrl driver that determines whether it's running on Tegra20 or Tegra30, instead have separate drivers for each that call into utility functions to implement the majority of the driver. This change is based on review feedback of the SPEAr pinctrl driver, which had originally copied to Tegra driver structure. This requires that the two drivers have unique names. Update a couple spots in arch/arm/mach-tegra for the name change. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-18ARM: tegra: Switch to new pinctrl driverStephen Warren1-3/+3
* Rename old pinmux and new pinctrl platform driver and DT match table entries, so the new driver gets instantiated. * Re-write board-pinmux.c, so that it uses pinctrl APIs to configura the pinmux. * Re-write board-*-pinmux.c so that the pinmux configuration tables are in pinctrl format. Ventana's pin mux table needed some edits on top of the basic format conversion, since some mux options that were previously marked as reserved are now valid in the new pinctrl driver. Attempting to use the old reserved names will result in a failure. Specifically, groups lpw0, lpw2, lsc1, lsck, and lsda were changed from function rsvd4 to displaya, and group pta was changed from function rsvd2 to hdmi. All boards' pin mux tables needed some edits on top of the based format conversion, since function i2c was split into i2c1 (first general I2C controller) and i2cp (power I2C controller) to better align function definitions with HW blocks. Due to the split of mux tables into pure mux and pull/tristate tables, many entries in the separate Seaboard/Ventana tables could be merged into the common table, since the entries differed only in the portion in one of the tables, not both. Most pin groups allow configuration of mux, tri-state, and pull. However, some don't allow pull configuration, which is instead configured by new groups that only allow pull configuration. This is a reflection of the true HW capabilities, which weren't fully represented by the old pinmux driver. This required adding new pull table entries for those new groups, and setting many other entries' pull configuration to TEGRA_PINCONFIG_DONT_SET. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Olof Johansson <olof@lixom.net>
2012-04-18pinctrl: show pin name for pingroups in sysfsDong Aisheng2-4/+29
Pin name is more useful to users. After change, when cat pingroups in sysfs, it becomes: root@freescale /sys/kernel/debug/pinctrl/20e0000.iomuxc$ cat pingroups registered pin groups: group: uart4grp-1 pin 219 (MX6Q_PAD_KEY_ROW0) pin 218 (MX6Q_PAD_KEY_COL0) group: usdhc4grp-1 pin 305 (MX6Q_PAD_SD4_CMD) pin 306 (MX6Q_PAD_SD4_CLK) pin 315 (MX6Q_PAD_SD4_DAT0) pin 316 (MX6Q_PAD_SD4_DAT1) pin 317 (MX6Q_PAD_SD4_DAT2) pin 318 (MX6Q_PAD_SD4_DAT3) pin 319 (MX6Q_PAD_SD4_DAT4) pin 320 (MX6Q_PAD_SD4_DAT5) pin 321 (MX6Q_PAD_SD4_DAT6) pin 322 (MX6Q_PAD_SD4_DAT7) Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-18pinctrl: show pin name when request pinsDong Aisheng1-2/+3
Pin name is more useful to users. Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-18pinctrl: implement devm_pinctrl_get()/put()Stephen Warren1-0/+56
These functions allow the driver core to automatically clean up any allocations made by drivers, thus leading to simplified drivers. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-18pinctrl: a minor fix of pin config debug informationDong Aisheng1-2/+2
Signed-off-by: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-18pinctrl: pinconf: fix compilation error if PINCONF is not selectedViresh Kumar1-1/+1
When we compile pinctrl layer for platforms without CONFIG_PINCONF, we get following compilation errors: drivers/built-in.o: In function `pinctrl_show': linux-2.6/drivers/pinctrl/core.c:1116: undefined reference to `pinconf_show_setting' drivers/built-in.o: In function `pinctrl_maps_show': linux-2.6/drivers/pinctrl/core.c:1071: undefined reference to `pinconf_show_map' drivers/built-in.o: In function `pinctrl_init_device_debugfs': linux-2.6/drivers/pinctrl/core.c:1224: undefined reference to `pinconf_init_device_debugfs' make[1]: *** [.tmp_vmlinux1] Error 1 This patch fixes this. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-18pinctrl: allow pctldevs to decode pin config in debugfsStephen Warren1-4/+27
Add a pinconf op so that pin controller drivers can decode their pin config settings for debugfs. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 09:36:35 +0000