summaryrefslogtreecommitdiff
path: root/drivers/media/i2c
AgeCommit message (Collapse)AuthorFilesLines
2013-07-13Merge branch 'v4l_for_linus' of ↵Linus Torvalds86-1867/+2304
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "This series contain: - new i2c video drivers: ml86v7667 (video decoder), ths8200 (video encoder) - a new video driver for EasyCap cards based on Fushicai USBTV007 - Improved support for OF and embedded systems, with V4L2 async initialization and a better support for clocks - API cleanups on the ioctls used by the v4l2 debug tool - Lots of cleanups - As usual, several driver improvements and new cards additions - Revert two changesets that change the minimal symbol rate for stv0399, as request by Manu - Update MAINTAINERS and other files to point to my new e-mail" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (378 commits) MAINTAINERS & ABI: Update to point to my new email [media] stb0899: restore minimal rate to 5Mbauds [media] exynos4-is: Correct colorspace handling at FIMC-LITE [media] exynos4-is: Set valid initial format on FIMC.n subdevs [media] exynos4-is: Set valid initial format on FIMC-IS-ISP subdev pads [media] exynos4-is: Fix format propagation on FIMC-IS-ISP subdev [media] exynos4-is: Set valid initial format at FIMC-LITE [media] exynos4-is: Fix format propagation on FIMC-LITE.n subdevs [media] MAINTAINERS: Update S5P/Exynos FIMC driver entry [media] Documentation: Update driver's directory in video4linux/fimc.txt [media] exynos4-is: Change fimc-is firmware file names [media] exynos4-is: Add support for Exynos5250 MIPI-CSIS [media] exynos4-is: Add Exynos5250 SoC support to fimc-lite driver [media] exynos4-is: Drop drvdata handling in fimc-lite for non-dt platforms [media] media: i2c: tvp514x: remove manual setting of subdev name [media] media: i2c: tvp7002: remove manual setting of subdev name [media] mem2mem: set missing v4l2_dev pointer [media] wl128x: add missing struct v4l2_device [media] tvp514x: Fix init seqeunce [media] saa7134: Fix sparse warnings by adding __user annotation ...
2013-07-03drivers: avoid parsing names as kthread_run() format stringsKees Cook1-1/+2
Calling kthread_run with a single name parameter causes it to be handled as a format string. Many callers are passing potentially dynamic string content, so use "%s" in those cases to avoid any potential accidents. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-28[media] media: i2c: tvp514x: remove manual setting of subdev nameLad, Prabhakar1-1/+0
This patch removes manual setting of subdev name in the probe, ideally subdev names must be unique. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-28[media] media: i2c: tvp7002: remove manual setting of subdev nameLad, Prabhakar1-1/+0
This patch removes manual setting of subdev name in the probe, ideally subdev names must be unique. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-28[media] tvp514x: Fix init seqeunceLars-Peter Clausen1-5/+5
client->driver->id_table will always point to the first entry in the device id table. So all devices will use the same init sequence. Use the id table entry that gets passed to the driver's probe() function to get the right init sequence. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-28[media] ml86v7667: fix compiler warningHans Verkuil1-1/+1
build/media_build/v4l/ml86v7667.c: In function 'ml86v7667_s_ctrl': build/media_build/v4l/ml86v7667.c:120:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] int ret = 0; ^ Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Vladimir Barinov <source@cogentembedded.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] imx074: support asynchronous probingGuennadi Liakhovetski1-3/+17
Both synchronous and asynchronous imx074 subdevice probing is supported by this patch. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] soc-camera: switch I2C subdevice drivers to use v4l2-clkGuennadi Liakhovetski15-36/+228
Instead of centrally enabling and disabling subdevice master clocks in soc-camera core, let subdevice drivers do that themselves, using the V4L2 clock API and soc-camera convenience wrappers. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] soc_camera: tw9910: Remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions, the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] soc_camera: mt9t112: Remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions, the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] soc_camera: Fix checkpatch warning in ov9640.cSachin Kamat1-1/+1
Silences the following warning: WARNING: please, no space before tabs Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] soc_camera: Constify dev_pm_ops in mt9t031.cSachin Kamat1-1/+1
Silences the following warning: WARNING: struct dev_pm_ops should normally be const Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] media: i2c: ths7303: remove unused member driver_dataLad, Prabhakar1-4/+0
This patch removes the driver_data member from ths7303_state structure. The driver_data member was intended to differentiate between ths7303 and ths7353 chip and get the g_chip_ident, But as of now g_chip_ident is obsolete, so there is no need of driver_data. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] media: i2c: tvp514x: add OF supportLad, Prabhakar1-6/+56
add OF support for the tvp514x driver. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Sakari Ailus <sakari.ailus@iki.fi> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: devicetree-discuss@lists.ozlabs.org Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: davinci-linux-open-source@linux.davincidsp.com Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-20Merge branch 'linus' into patchworkMauro Carvalho Chehab1-1/+1
* linus: (1465 commits) ARM: tegra30: clocks: Fix pciex clock registration lseek(fd, n, SEEK_END) does *not* go to eof - n Linux 3.10-rc6 smp.h: Use local_irq_{save,restore}() in !SMP version of on_each_cpu(). powerpc: Fix missing/delayed calls to irq_work powerpc: Fix emulation of illegal instructions on PowerNV platform powerpc: Fix stack overflow crash in resume_kernel when ftracing snd_pcm_link(): fix a leak... use can_lookup() instead of direct checks of ->i_op->lookup move exit_task_namespaces() outside of exit_notify() fput: task_work_add() can fail if the caller has passed exit_task_work() xfs: don't shutdown log recovery on validation errors xfs: ensure btree root split sets blkno correctly xfs: fix implicit padding in directory and attr CRC formats xfs: don't emit v5 superblock warnings on write mei: me: clear interrupts on the resume path mei: nfc: fix nfc device freeing mei: init: Flush scheduled work before resetting the device sctp: fully initialize sctp_outq in sctp_outq_init netiucv: Hold rtnl between name allocation and device registration. ...
2013-06-19[media] smiapp: Clean up media entity after unregistering subdevSakari Ailus1-1/+1
media_entity_cleanup() frees the links array which will be accessed by media_entity_remove_links() called by v4l2_device_unregister_subdev(). Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-17[media] mt9p031: Use bulk regulator APILaurent Pinchart1-15/+15
The sensor is powered by three supplies. Use the bulk regulator API to enable and disable them instead of performing the operations manually. This fixes a warning caused by ignoring the return value of regulator_enable(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-17[media] media: i2c: mt9p031: add OF supportLad, Prabhakar1-2/+40
Add OF support for the mt9p031 sensor driver. Alongside this patch sorts the header inclusion alphabetically. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-17[media] ths8200: fix two compiler warningsHans Verkuil1-4/+0
drivers/media/i2c/ths8200.c: In function ‘ths8200_g_register’: drivers/media/i2c/ths8200.c:121:21: warning: unused variable ‘client’ [-Wunused-variable] drivers/media/i2c/ths8200.c: In function ‘ths8200_s_register’: drivers/media/i2c/ths8200.c:132:21: warning: unused variable ‘client’ [-Wunused-variable] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-17[media] media: i2c: ths8200: driver for TI video encoderHans Verkuil4-0/+731
The full datasheets are available from TI website:- http://www.ti.com/product/ths8200 Note: This patch adds support only for progressive format as of now. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mats Randgaard <mats.randgaard@cisco.com> Signed-off-by: Martin Bugge <martin.bugge@cisco.com> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-17[media] tvp5150: fix s_std supportHans Verkuil1-5/+3
- do exact matching for special formats like PAL-M - drop autodetect support: it's non-standard, and it is bogus as well since there is no way to get back the detected standard since neither g_std nor querystd are implemented. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-17[media] vpx3220: fix querystdHans Verkuil1-4/+6
Return V4L2_STD_UNKNOWN if no signal is detected. Otherwise AND the standard mask with the detected standards. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-17[media] tvp514x: fix querystdHans Verkuil1-5/+7
Return V4L2_STD_UNKNOWN if no signal is detected. Otherwise AND the standard mask with the detected standards. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-17[media] saa7191: fix querystdHans Verkuil1-6/+8
Return V4L2_STD_UNKNOWN if no signal is detected. Otherwise AND the standard mask with the detected standards. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-17[media] saa7115: fix querystdHans Verkuil1-1/+4
Return V4L2_STD_UNKNOWN if no signal is detected. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-17[media] saa7110: fix querystdHans Verkuil1-2/+2
Return V4L2_STD_UNKNOWN if no signal is detected. Otherwise AND the standard mask with the detected standards. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-17[media] ks0127: fix querystdHans Verkuil1-5/+12
Return V4L2_STD_UNKNOWN if no signal is detected. Otherwise AND the standard mask with the detected standards. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-17[media] bt819: fix querystdHans Verkuil1-3/+5
Return V4L2_STD_UNKNOWN if no signal is detected. Otherwise AND the standard mask with the detected standards. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-17[media] adv7183: fix querystdHans Verkuil1-8/+8
If no signal is detected, return V4L2_STD_UNKNOWN. Otherwise AND the standard with the detected standards. Note that the v4l2 core initializes the std with tvnorms before calling the querystd ioctl. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Scott Jiang <scott.jiang.linux@gmail.com> Acked-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-17[media] sr030pc30: convert to the control frameworkHans Verkuil1-188/+88
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-17[media] media/i2c: fill in missing reg->size fieldsHans Verkuil4-0/+4
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-17[media] cx25840: remove the v4l2-chip-ident.h includeHans Verkuil2-36/+48
Replace the V4L2_IDENT_ macros from v4l2-chip-ident.h with driver specific defines. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-17[media] media/i2c: remove g_chip_ident opHans Verkuil47-671/+73
This is no longer needed since the core now handles this through DBG_G_CHIP_INFO. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-17[media] soc_camera sensors: remove g_chip_ident opHans Verkuil14-300/+21
This is no longer needed since the core now handles this through DBG_G_CHIP_INFO. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-17[media] saa7115: add back the dropped 'found' messageHans Verkuil1-0/+2
The saa7115 driver used to show a 'chip found' message during probe. This was accidentally dropped during recent commits. Add it back as it is quite useful. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-13[media] media: i2c: ths7303: make the pdata as a constant pointerLad, Prabhakar1-7/+8
generally the pdata needs to be a constant pointer in the device state structure. This patch makes the pdata as a constant pointer and alongside returns -EINVAL when pdata is NULL. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-13[media] media: i2c: ths7303: remove unnecessary function ths7303_setup()Lad, Prabhakar1-27/+4
the ths7303_setup() was doing the same thing as ths7303_setval() except that ths7303_setval() sets it to some particular mode. This patch removes ths7303_setup() function and calls ths7303_setval() in the probe setting the device to 480I_576I filter mode in the probe. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-13[media] media: i2c: ths7303: remove init_enable option from pdataLad, Prabhakar1-3/+1
This patch removes init_enable option from pdata, the init_enable was intended that the device should start streaming video immediately but ideally the bridge drivers should call s_stream explicitly for such devices to start video. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-13[media] ml86v7667: fix the querystd implementationHans Verkuil1-4/+4
The *std should be set to V4L2_STD_UNKNOWN, not the function's return code. Also, *std should be ANDed with 525_60 or 625_50. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-13[media] ML86V7667: new video decoder driverVladimir Barinov3-0/+441
Add OKI Semiconductor ML86V7667 video decoder driver. [Sergei: added v4l2_device_unregister_subdev() call to the error cleanup path of ml86v7667_probe(), renamed ml86v7667_try_mbus_fmt() to ml86v7667_mbus_fmt(), killed v4l2_chip_match_i2c_client() checks in the [gs]_register() methods, fixed the prototype of the s_register() method, did some cleanup.] Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-13[media] adv7180: add more subdev video opsVladimir Barinov1-0/+46
Add subdev video ops for ADV7180 video decoder. This makes decoder usable on the soc-camera drivers. [Sergei: renamed adv7180_try_mbus_fmt() to adv7180_mbus_fmt().] Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-12[media] s5c73m3: Do not ignore errors from regulator_enable()Sylwester Nawrocki1-3/+6
This fixes following compilation warning: drivers/media/i2c/s5c73m3/s5c73m3-core.c: In function ‘__s5c73m3_power_off’: drivers/media/i2c/s5c73m3/s5c73m3-core.c:1389:19: warning: ignoring return value of ‘regulator_enable’, declared with attribute warn_unused_result Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-12[media] s5c73m3: Fix whitespace related warningsSachin Kamat1-2/+2
Silences the following type of warning: WARNING: space prohibited before semicolon Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27[media] media: i2c: remove duplicate checks for EPERM in dbg_g/s_registerLad, Prabhakar17-72/+2
This patch removes check for EPERM in dbg_g/s_register of subdevice drivers as this check is already performed by core. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27[media] media: i2c: tvp7002: remove duplicate defineLad, Prabhakar1-3/+0
this patch removes duplicate #define TVP7002_MODULE_NAME form the driver file, which was also defined in media/tvp7002.h Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27[media] sony-btf-mpx: Drop needless newline in param descriptionJean Delvare1-1/+1
Module parameter descriptions need not be terminated with a newline. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-27[media] ad9389b: fix error return code in ad9389b_probe()Wei Yongjun1-0/+2
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-21[media] saa7115: Don't use a dynamic arrayMauro Carvalho Chehab1-9/+10
At least on s390, gcc complains about that: drivers/media/i2c/saa7115.c: In function 'saa711x_detect_chip.constprop.2': drivers/media/i2c/saa7115.c:1647:1: warning: 'saa711x_detect_chip.constprop.2' uses dynamic stack allocation [enabled by default] While for me the above report seems utterly bogus, as the compiler should be optimizing saa711x_detect_chip, merging it with saa711x_detect_chip and changing: char chip_ver[size - 1]; to char chip_ver[16]; because this function is only called on this code snippet: char name[17]; ... ident = saa711x_detect_chip(client, id, name, sizeof(name)); It seems that gcc is not optimizing it, at least on s390. As getting rid of it is easy, let's do it. Reported-by: kbuild test robot <fengguang.wu@intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-21[media] s5c73m3: Fix off-by-one valid range checking for fie->indexAxel Lin1-1/+1
Current code uses fie->index as array subscript, thus the valid value range is 0 ... ARRAY_SIZE(s5c73m3_intervals) - 1. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-05-21[media] saa7115: Add register setup and config for gm7113cJon Arne Jørgensen1-10/+37
The gm7113c chip is similar to the original saa7113 chip, so I try to re-use most of the saa7113 specific setup-/configuration registers. According to the datasheet, the gm7113c chip has not implemented any register-addresses after 0x1f, so I add a new entry to for the chip to the saa711x_has_reg function. The devices I've seen using this chip will fail to get stable video-sync if these registers are not zeroed: R_14_ANAL_ADC_COMPAT_CNTL R_15_VGATE_START_FID_CHG R_16_VGATE_STOP R_17_MISC_VGATE_CONF_AND_MSB The saa711x_set_v4lstd is updated to send a simpler configuration-table to avoid setting these registers. Signed-off-by: Jon Arne Jørgensen <jonarne@jonarne.no> Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 01:11:22 +0000