summaryrefslogtreecommitdiff
path: root/drivers/ide/ide-taskfile.c
AgeCommit message (Collapse)AuthorFilesLines
2008-02-06ide: add ide_read_error() inline helperBartlomiej Zolnierkiewicz1-3/+2
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-06ide: add ide_read_[alt]status() inline helpersBartlomiej Zolnierkiewicz1-15/+15
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide: remove ide_ata66_check()Bartlomiej Zolnierkiewicz1-1/+4
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02ide: remove set_transfer()Bartlomiej Zolnierkiewicz1-1/+5
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: update/add my CopyrightsBartlomiej Zolnierkiewicz1-4/+4
The last years stuff and a trip down memory lane... Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: delete filenames/versions from commentsBartlomiej Zolnierkiewicz1-2/+0
Delete filenames/versions from comments. I'm leaving decisions about adding DRV_VERSION defines and MODULE_VERSION()-s to maintainers of the respective drivers. While at it: * Remove unused VERSION define from ide.c. * Remove unused/stale DRV_VERSION define from au1xxx-ide.c. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-01ide: make wait_drive_not_busy() static againAdrian Bunk1-1/+1
After commit 7267c3377443322588cddaf457cf106839a60463 wait_drive_not_busy() can become static again. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: switch ide_cmd_ioctl() to use REQ_TYPE_ATA_TASKFILE requestsBartlomiej Zolnierkiewicz1-32/+31
Based on the earlier work by Tejun Heo. There should be no functionality changes caused by this patch. Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: switch set_xfer_rate() to use REQ_TYPE_ATA_TASKFILE requestsBartlomiej Zolnierkiewicz1-1/+2
Based on the earlier work by Tejun Heo. Switch set_xfer_rate() to use REQ_TYPE_ATA_TASKFILE requests and make ide_wait_cmd() static. There should be no functionality changes caused by this patch. Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: convert "empty" REQ_TYPE_ATA_CMD requests to use REQ_TYPE_ATA_TASKFILEBartlomiej Zolnierkiewicz1-1/+1
Based on the previous work by Tejun Heo. There should be no functionality changes caused by this patch. Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: initialize rq->cmd_type in ide_init_drive_cmd() callersBartlomiej Zolnierkiewicz1-0/+4
* Initialize rq->cmd_type in ide_wait_cmd(), ide_cmd_ioctl() and set_pio_mode() (other callers were aleady over-riding rq->cmd_type). * Remove no longer needed rq->cmd_type setup from ide_init_drive_cmd(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: use wait_drive_not_busy() in drive_cmd_intr() (take 2)Bartlomiej Zolnierkiewicz1-3/+2
Use wait_drive_not_busy() in drive_cmd_intr(). v2: * Fix wait_drive_not_busy() comment (noticed by Sergei). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: kill DATA_READY defineBartlomiej Zolnierkiewicz1-2/+2
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: task_end_request() fixTejun Heo1-7/+4
task_end_request() modified to always call ide_end_drive_cmd() for taskfile requests. Previously, ide_end_drive_cmd() was called only when IDE_TFLAG_FLAGGED was set. Also, ide_dma_intr() is modified to use task_end_request(). Enables TASKFILE ioctls to get valid register outputs on successful completion. Bart: - ported it over recent IDE changes Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: use rq->nr_sectors in task_end_request()Bartlomiej Zolnierkiewicz1-2/+2
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: remove needless ->cursg clearing from task_end_request()Bartlomiej Zolnierkiewicz1-2/+0
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: set IDE_TFLAG_IN_* flags before queuing/executing commandBartlomiej Zolnierkiewicz1-4/+5
* Add IDE_TFLAG_{HOB,TF,DEVICE} defines. * Set IDE_TFLAG_IN_* flags in {do_rw,ide_no_data,ide_raw}_taskfile() users. * Remove no longer needed ->tf_flags setup from ide_end_drive_cmd(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: fix final status check in task_in_intr()Bartlomiej Zolnierkiewicz1-1/+1
Check for DRQ bit being cleared on the final status check. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: fix ->io_32bit race in ide_taskfile_ioctl()Tejun Heo1-5/+12
In ide_taskfile_ioctl(), there was a race condition involving drive->io_32bit. It was cleared and restored during ioctl requests but there was no synchronization with other requests. So, other requests could execute with the altered ->io_32bit setting or updated drive->io_32bit could be overwritten by ide_taskfile_ioctl(). This patch adds IDE_TFLAG_IO_16BIT flag to indicate to ide_pio_datablock() that 16-bit I/O is needed regardless of drive->io_32bit settting. Bart: - ported it over recent IDE changes Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: remove broken disk byte-swapping supportBartlomiej Zolnierkiewicz1-30/+2
Remove broken disk byte-swapping support: - it can cause a data corruption on SMP (or if using PREEMPT on UP) - all data coming from disk are byte-swapped by taskfile_*_data() which results in incorrect identify data being reported by /proc/ide/ and IOCTLs - "hdx=bswap/byteswap" kernel parameter has been broken on m68k host drivers (including Atari/Q40 ones) since 2.5.x days (because of 'hwif' zero-ing) - byte-swapping is limited to PIO transfers (for working with TiVo disks on x86 machines using user-space solutions or dm-byteswap should result in much better performance because DMA can be used) For previous discussions please see: http://www.ussg.iu.edu/hypermail/linux/kernel/0201.0/0768.html http://lkml.org/lkml/2004/2/28/111 [ I have dm-byteswap device mapper target if somebody is interested (patch is for 2.6.4 though but I'll dust it off if needed). ] Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: add ide_set_irq() inline helperBartlomiej Zolnierkiewicz1-2/+1
There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26ide: dump taskfile HOB registers in ide_tf_load() (if DEBUG is defined)Bartlomiej Zolnierkiewicz1-0/+4
* Dump taskfile HOB registers in ide_tf_load() (if DEBUG is defined). * Remove no longer needed DEBUG code from __ide_do_rw_disk(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide-disk: use do_rw_taskfile() (take 2)Bartlomiej Zolnierkiewicz1-8/+8
* Add IDE_TFLAG_DMA_PIO_FALLBACK taskfile flag to indicate the need to skip loading taskfile registers in do_rw_taskfile(). * Export do_rw_taskfile(). * Convert __ide_do_rw_disk() to use do_rw_taskfile(). * Unexport ide_tf_load(). * Unexport {pre_task_out,task_in}_intr() and make it static. * Remove incorrect comment about do_rw_taskfile() from <linux/ide.h>. There should be no functionality changes caused by this patch. v2: * Add missing blk_fs_request() check to task_dma_ok() (for VDMA). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove 'handler' field from ide_task_t (take 2)Bartlomiej Zolnierkiewicz1-9/+19
* Add IDE_TFLAG_CUSTOM_HANDLER taskfile flag and use it for internal requests which require custom handlers. Check the flag in do_rw_taskfile() and set handler accordingly. * Cleanup ide_init_{specify,restore,setmult}_cmd() and rename it to ide_tf_set_{specify,restore,setmult}_cmd(). * Make {set_geometry,recal,set_multmode}_intr() static. * Remove no longer needed 'handler' field from ide_task_t. v2: * 'handler' in do_rw_taskfile() must be set to NULL initially. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: use ->data_phase to set ->handler in do_rw_taskfile()Bartlomiej Zolnierkiewicz1-6/+10
* Use ->data_phase to set ->handler in do_rw_taskfile() instead of setting ->handler in callers of ide_raw_taskfile()/do_rw_taskfile(). * Unexport task_no_data_intr() and make it static. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: convert do_rw_taskfile() to use ->data_phaseBartlomiej Zolnierkiewicz1-12/+13
* Use task->data_phase in do_rw_taskfile() to decide what to do. * task->prehandler is only used by TASKFILE[_MULTI]_OUT so just use pre_task_out_intr() directly and remove no longer needed 'prehandler' field from ide_task_t. * Remove no longer needed ide_pre_handler_t type. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: merge flagged_taskfile() into do_rw_taskfile()Bartlomiej Zolnierkiewicz1-20/+12
Based on the earlier work by Tejun Heo. task->data_phase == TASKFILE_MULTI_{IN,OUT} vs drive->mult_count == 0 check is needed also for ide_taskfile_ioctl() requests that don't have IDE_TFLAG_FLAGGED taskfile flag set. Cc: Tejun Heo <htejun@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove 'tf_in_flags' field from ide_task_tBartlomiej Zolnierkiewicz1-16/+13
* Add IDE_TFLAG_IN_DATA taskfile flag to indicate the need of reading IDE_DATA_REG in ide_end_drive_cmd(). Set the new flag in ide_taskfile_ioctl() if ->in_flags.b.data is set. * Add IDE_TFLAG_FLAGGED_SET_IN_FLAGS taskfile flag to indicate the need of modifying ->in_flags in ide_taskfile_ioctl(). Set the new flag in flagged_taskfile() and move the code modifying ->tf_in_flags to ide_taskfile_ioctl(). While at it remove the bogus comment: ->tf_in_flags (except .b.data) have no effect on selection of registers to read. * Remove no longer needed 'tf_in_flags' field from ide_task_t. As the result we finally have the internals of HDIO_DRIVE_TASKFILE ioctl separated from the core IDE code. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove 'command_type' field from ide_task_tBartlomiej Zolnierkiewicz1-45/+44
* Add 'data_buf' and 'nsect' variables in ide_taskfile_ioctl() to cache data buffer pointer and number of sectors to transfer (this allows us to have only one ide_diag_taskfile() call). * Add IDE_TFLAG_WRITE taskfile flag and use it to check whether the REQ_RW request flag should be set. * Move ->command_type handling from ide_diag_taskfile() to ide_taskfile_ioctl() and use ->req_cmd instead of ->command_type. * Add 'nsect' parameter to ide_raw_taskfile(). * Merge ide_diag_taskfile() into ide_raw_taskfile(). * Initialize ->data_phase explicitly in idedisk_prepare_flush(), ide_start_power_step() and ide_disk_special(). * Remove no longer needed 'command_type' field from ide_task_t. * Add #ifndef/#endif __KERNEL__ to <linux/hdreg.h> around no longer used by kernel IDE_DRIVE_TASK_* and TASKFILE_* defines. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: switch ide_task_ioctl() to use REQ_TYPE_ATA_TASKFILE requestsBartlomiej Zolnierkiewicz1-14/+15
Based on the earlier work by Tejun Heo. There should be no functionality changes caused by this patch. Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove unnecessary writes to HOB taskfile registersBartlomiej Zolnierkiewicz1-0/+9
* Set taskfile flags for REQ_TYPE_ATA_TASKFILE requests before adding the request to the queue. * Cleanup execute_drive_cmd(). * Remove unnecessary writes to HOB taskfile registers when using LBA48 disk for the following cases: - Power Management requests (WIN_FLUSH_CACHE[_EXT], WIN_STANDBYNOW1, WIN_IDLEIMMEDIATE commands) - special commands (WIN_SPECIFY, WIN_RESTORE, WIN_SETMULT) - Host Protected Area support (WIN_READ_NATIVE_MAX, WIN_SET_MAX) - /proc/ide/ SMART support (WIN_SMART with SMART_ENABLE, SMART_READ_VALUES and SMART_READ_THRESHOLDS subcommands) - write cache enabling/disabling in ide-disk (WIN_SETFEATURES with SETFEATURES_{EN,DIS}_WCACHE) - write cache flushing in ide-disk (WIN_FLUSH_CACHE[_EXT]) - acoustic management in ide-disk (WIN_SETFEATURES with SETFEATURES_{EN,DIS}_AAM) - door (un)locking in ide-disk (WIN_DOORLOCK, WIN_DOORUNLOCK) - /proc/ide/hd?/identify support (WIN_IDENTIFY) - ACPI _GTF taskfiles Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: use ide_tf_load() in execute_drive_cmd()Bartlomiej Zolnierkiewicz1-1/+9
* Add IDE_TFLAG_OUT_DEVICE taskfile flag to indicate the need of writing the Device register and handle it in ide_tf_load(). Update ide_tf_load() and {do_rw,flagged}_taskfile() users accordingly. * Use struct ide_taskfile and ide_tf_load() in execute_drive_cmd(). * Make the debugging code dump all taskfile registers for both REQ_ATA_TYPE_{CMD,TASK} requests and move it to ide_tf_load() so it also covers REQ_ATA_TYPE_TASKFILE requests. There should be no functionality changes caused by this patch (unless DEBUG is defined). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: use do_rw_taskfile() in flagged_taskfile()Bartlomiej Zolnierkiewicz1-107/+73
Based on the earlier work by Tejun Heo. * Move setting IDE_TFLAG_LBA48 taskfile flag from do_rw_taskfile() function to the callers. * Add IDE_TFLAG_FLAGGED taskfile flag for flagged taskfiles coming from ide_taskfile_ioctl(). Check it instead of ->tf_out_flags.all. * Add IDE_TFLAG_OUT_DATA taskfile flag to indicate the need to load IDE data register in ide_tf_load(). * Add IDE_TFLAG_OUT_* taskfile flags to indicate the need to load particular IDE taskfile registers in ide_tf_load(). * Update do_rw_taskfile() and ide_tf_load() users to set respective IDE_TFLAG_OUT_* taksfile flags. * Add task_dma_ok() helper. * Use IDE_TFLAG_FLAGGED taskfile flag to select HIHI mask in ide_tf_load(). * Use do_rw_taskfile() in flagged_taskfile(). * Remove no longer needed 'tf_out_flags' field from ide_task_t. There should be no functionality changes caused by this patch. Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: add ide_no_data_taskfile() helperBartlomiej Zolnierkiewicz1-2/+10
* Add ide_no_data_taskfile() helper and convert ide_raw_taskfile() w/ NO DATA protocol users to use it instead. * Set ->data_phase explicitly in ide_no_data_taskfile() (TASKFILE_NO_DATA is defined as 0x0000). * Unexport task_no_data_intr(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: add ide_tf_load() helperBartlomiej Zolnierkiewicz1-22/+34
Based on the earlier work by Tejun Heo. * Add 'tf_flags' field (for taskfile flags) to ide_task_t. * Add IDE_TFLAG_LBA48 taskfile flag for LBA48 taskfiles. * Add IDE_TFLAG_NO_SELECT_MASK taskfile flag for __ide_do_rw_disk() which doesn't use SELECT_MASK() (looks like a bug but it requires some more investigation). * Split off ide_tf_load() helper from do_rw_taskfile(). * Convert __ide_do_rw_disk() to use ide_tf_load(). There should be no functionality changes caused by this patch. Cc: Tejun Heo <htejun@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: add struct ide_taskfile (take 2)Bartlomiej Zolnierkiewicz1-53/+46
* Don't set write-only ide_task_t.hobRegister[6] and ide_task_t.hobRegister[7] in idedisk_set_max_address_ext(). * Add struct ide_taskfile and use it in ide_task_t instead of tfRegister[] and hobRegister[]. * Remove no longer needed IDE_CONTROL_OFFSET_HOB define. * Add #ifndef/#endif __KERNEL__ around definitions of {task,hob}_struct_t. While at it: * Use ATA_LBA define for LBA bit (0x40) as suggested by Tejun Heo. v2: * Add missing newlines. (Noticed by Sergei) * Use ~ATA_LBA instead of 0xBF. (Noticed by Sergei) * Use unnamed unions for error/feature and status/command. (Suggested by Sergei). There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-25ide: remove task_ioreg_t typedef (take 2)Bartlomiej Zolnierkiewicz1-2/+2
Remove task_ioreg_t typedef from the kernel code (but leave it in <linux/hdreg.h> for #ifndef/#endif __KERNEL__ case). While at it also move sata_ioreg_t typedef under #ifndef/#endif __KERNEL__. v2: Remove name of the second parameter from ide_execute_command() declaration. (Noticed by Sergei). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-11-05ide: add missing #ifdef/#endif CONFIG_IDE_TASK_IOCTLBartlomiej Zolnierkiewicz1-0/+2
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-11-05ide: add missing rq.ref_count initialization to ide_diag_taskfile()Bartlomiej Zolnierkiewicz1-0/+1
Noticed by Tejun Heo. Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-22[SG] Update drivers to use sg helpersJens Axboe1-1/+1
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-20ide: check drive->using_dma in flagged_taskfile()Bartlomiej Zolnierkiewicz1-0/+3
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: check ->dma_setup() return value in flagged_taskfile()Bartlomiej Zolnierkiewicz1-4/+7
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20ide: remove stale comments from ide-taskfile.cBartlomiej Zolnierkiewicz1-23/+0
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-16IDE: sg chaining supportJens Axboe1-4/+14
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-03ide: never called printk statement in ide-taskfile.c::wait_drive_not_busyMasatake YAMATO1-4/+8
Look at wait_drive_not_busy in drivers/ide/ide-taskfile.c: static u8 wait_drive_not_busy(ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); int retries = 100; u8 stat; /* * Last sector was transfered, wait until drive is ready. * This can take up to 10 usec, but we will wait max 1 ms * (drive_cmd_intr() waits that long). */ while (((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) && retries--) udelay(10); if (!retries) printk(KERN_ERR "%s: drive still BUSY!\n", drive->name); return stat; } `printk' is never called because `retries' never holds zero at the outside of `while' loop: when `retries' holds zero at the while's loop condition, `retries' will hold -1 at the if condition. Signed-off-by: Masatake YAMATO <jet@gyve.org> Cc: Chuck Ebbert <cebbert@redhat.com> Cc: joe@perches.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2006-10-16[PATCH] ide: add sanity checking to ide taskfile ioctlAlan Cox1-4/+9
Without this the user can feed in bogus values and get very bogus results. Security impact is minimal as this ioctl isn't available to unpriviledged processes anyway. Reported to the l/k list and found with an auditing tool. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-30[PATCH] Split struct request ->flags into two partsJens Axboe1-4/+4
Right now ->flags is a bit of a mess: some are request types, and others are just modifiers. Clean this up by splitting it into ->cmd_type and ->cmd_flags. This allows introduction of generic Linux block message types, useful for sending generic Linux commands to block devices. Signed-off-by: Jens Axboe <axboe@suse.de>
2006-07-03[PATCH] lockdep: annotate enable_in_hardirq()Ingo Molnar1-1/+1
Make use of local_irq_enable_in_hardirq() API to annotate places that enable hardirqs in hardirq context. Has no effect on non-lockdep kernels. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel1-1/+0
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-23[PATCH] More BUG_ON conversionEric Sesterhenn1-2/+1
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 00:43:15 +0000