summaryrefslogtreecommitdiff
path: root/drivers/hid
AgeCommit message (Collapse)AuthorFilesLines
2012-07-13Merge branch 'for-linus' of ↵Linus Torvalds3-0/+19
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer fixes from Dmitry Torokhov: "The changes are limited to adding new VID/PID combinations to drivers to enable support for new versions of hardware, most notably hardware found in new MacBook Pro Retina boxes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - add Andamiro Pump It Up pad Input: xpad - add signature for Razer Onza Tournament Edition Input: xpad - handle all variations of Mad Catz Beat Pad Input: bcm5974 - Add support for 2012 MacBook Pro Retina HID: add support for 2012 MacBook Pro Retina
2012-07-11Input: xpad - handle all variations of Mad Catz Beat PadYuri Khan2-0/+4
The device should be handled by xpad driver instead of generic HID driver. Signed-off-by: Yuri Khan <yurivkhan@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-10HID: add support for 2012 MacBook Pro RetinaRyan Bourgeois3-0/+15
Add support for the 15'' MacBook Pro Retina. The keyboard is the same as recent models. The patch needs to be synchronized with the bcm5974 patch for the trackpad - as usual. Patch originally written by clipcarl (forums.opensuse.org). [rydberg@euromail.se: Amended mouse ignore lines] Signed-off-by: Ryan Bourgeois <bluedragonx@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-06-26Merge branch 'upstream-fixes' of ↵Linus Torvalds4-43/+52
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: "The most important one is a purification of Kconfig for CONFIG_HID; the inclusion of HID groups and autoloading didn't leave the Kconfig in a really consistent state. Henrik's patch fixes that. In addition to that, there are two small fixes for logitech and magicmouse drivers." * 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Fix the generic Kconfig options HID: magicmouse: Correct report range of major / minor axes HID: logitech: don't use stack based dj_report structures
2012-06-25Merge branch 'v4l_for_linus' of ↵Linus Torvalds2-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab. Trivial conflict due to new USB HID ID's being added next to each other (Baanto vs Axentia). * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (44 commits) [media] smia: Fix compile failures [media] Fix VIDIOC_DQEVENT docbook entry [media] s5p-fimc: Fix control creation function [media] s5p-mfc: Fix checkpatch error in s5p_mfc_shm.h file [media] s5p-mfc: Fix setting controls [media] v4l/s5p-mfc: added image size align in VIDIOC_TRY_FMT [media] v4l/s5p-mfc: corrected encoder v4l control definitions [media] v4l: mem2mem_testdev: Fix race conditions in driver [media] s5p-mfc: Bug fix of timestamp/timecode copy mechanism [media] cxd2820r: Fix an incorrect modulation type bitmask [media] em28xx: Show a warning if the board does not support remote controls [media] em28xx: Add remote control support for Terratec's Cinergy HTC Stick HD [media] USB: Staging: media: lirc: initialize spinlocks before usage [media] Revert "[media] media: mx2_camera: Fix mbus format handling" [media] bw-qcam: driver and pixfmt documentation fixes [media] cx88: fix firmware load on big-endian systems [media] cx18: support big-endian systems [media] ivtv: fix support for big-endian systems [media] tuner-core: return the frequency range of the correct tuner [media] v4l2-dev.c: fix g_parm regression in determine_valid_ioctls() ...
2012-06-25HID: Fix the generic Kconfig optionsHenrik Rydberg2-27/+24
The generic HID driver is obviously not a special driver, so move it outside of the special drivers menu. Explain the usage and make the default follow the HID setting. This should simplify migration from older kernels. While at it, remove the redundant HID_SUPPORT option and modify the HID and USB_HID entries to better explain the bus structure. Reported-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-06-25HID: magicmouse: Correct report range of major / minor axesYufeng Shen1-2/+4
In patch "HID: magicmouse: Adjust major / minor axes to scale", touch_major and touch_minor axes are scaled by a factor of four when reported but the max touch_major/minor is not scaled accordingly. This patch scales the max touch_major/minor to be consistent with the reported value. Signed-off-by: Yufeng Shen <miletus@chromium.org> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-06-11[media] radio/si470x: Add support for the Axentia ALERT FM USB ReceiverHans de Goede2-0/+4
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-03HID: logitech: don't use stack based dj_report structuresMarc Dionne1-14/+24
On a system with a logitech wireless keyboard/mouse and DMA-API debugging enabled, this warning appears at boot: kernel: WARNING: at lib/dma-debug.c:929 check_for_stack.part.12+0x70/0xa7() kernel: Hardware name: MS-7593 kernel: uhci_hcd 0000:00:1d.1: DMA-API: device driver maps memory fromstack [addr=ffff8801b0079c29] Make logi_dj_recv_query_paired_devices and logi_dj_recv_switch_to_dj_mode use a structure allocated with kzalloc rather than a stack based one. Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-22Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial updates from Jiri Kosina: "As usual, it's mostly typo fixes, redundant code elimination and some documentation updates." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits) edac, mips: don't change code that has been removed in edac/mips tree xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer lib: Change mail address of Oskar Schirmer net: Change mail address of Oskar Schirmer arm/m68k: Change mail address of Sebastian Hess i2c: Change mail address of Oskar Schirmer net: Fix tcp_build_and_update_options comment in struct tcp_sock atomic64_32.h: fix parameter naming mismatch Kconfig: replace "--- help ---" with "---help---" c2port: fix bogus Kconfig "default no" edac: Fix spelling errors. qla1280: Remove redundant NULL check before release_firmware() call remoteproc: remove redundant NULL check before release_firmware() qla2xxx: Remove redundant NULL check before release_firmware() call. aic94xx: Get rid of redundant NULL check before release_firmware() call tehuti: delete redundant NULL check before release_firmware() qlogic: get rid of a redundant test for NULL before call to release_firmware() bna: remove redundant NULL test before release_firmware() tg3: remove redundant NULL test before release_firmware() call typhoon: get rid of redundant conditional before all to release_firmware() ...
2012-05-22Merge branch 'for-linus' of ↵Linus Torvalds23-519/+1432
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID subsystem updates from Jiri Kosina: "Apart from various driver updates and added support for a number of new devices (mostly multitouch ones, but not limited to), there is one change that is worth pointing out explicitly: creation of HID device groups and proper autoloading of hid-multitouch, implemented by Henrik Rydberg." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (50 commits) HID: wacom: fix build breakage without CONFIG_LEDS_CLASS HID: waltop: Extend barrel button fix HID: hyperv: Set the hid drvdata correctly HID: wacom: Unify speed setting HID: wacom: Add speed setting for Intuos4 WL HID: wacom: Move Graphire raport header check. HID: uclogic: Add support for UC-Logic TWHL850 HID: explain the signed/unsigned handling in hid_add_field() HID: handle logical min/max signedness properly in parser HID: logitech: read all 32 bits of report type bitfield HID: wacom: Add LED selector control for Wacom Intuos4 WL HID: hid-multitouch: fix wrong protocol detection HID: wiimote: Fix IR data parser HID: wacom: Add tilt reporting for Intuos4 WL HID: multitouch: MT interface matching for Baanto HID: hid-multitouch: Only match MT interfaces HID: Create a common generic driver HID: hid-multitouch: Switch to device groups HID: Create a generic device group HID: Allow bus wildcard matching ...
2012-05-22Merge branches 'upstream-fixes', 'wacom' and 'waltop' into for-linusJiri Kosina10-148/+453
Conflicts: drivers/hid/hid-core.c
2012-05-22Merge branch 'upstream' into for-linusJiri Kosina11-29/+304
Conflicts: drivers/hid/hid-core.c
2012-05-22Merge branches 'device-groups', 'logitech' and 'multitouch' into for-linusJiri Kosina4-89/+287
2012-05-21HID: wacom: fix build breakage without CONFIG_LEDS_CLASSDavid Rientjes1-1/+1
CONFIG_HID_WACOM must depend on CONFIG_LEDS_CLASS, otherwise CONFIG_NEW_LEDS may be disabled. Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-21HID: waltop: Extend barrel button fixNikolai Kondrashov1-38/+7
Extend Waltop barrel button fix to all models: ignore reported pressure when a barrel button is pressed, because it is rarely correct. Report zero pressure in such cases instead. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-17HID: hyperv: Set the hid drvdata correctlyK. Y. Srinivasan1-1/+2
Set the hid drvdata prior to invoking hid_add_device() as hid_add_device() expects this state to be set. This bug was introduced in the recent hid changes that were made in 07d9ab4f0e52cb ("HID: hid-hyperv: Do not use hid_parse_report() directly"). Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-16HID: wacom: Unify speed settingPrzemo Firszt1-55/+47
This patch unifies speed setting for both supported tablets. Functionality of "wacom_poke" (used only by Graphire) is now in "wacom_set_features". Reporting speed for both tablets can be changed by somethinkg like: echo 1 > /sys/class/bluetooth/hci0/hci0:1/{device No}/speed Accepted values: 0 - low speed, 1 - high speed. The way of changing reporting speed is the same for Graphire and Intuos4 WL. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-16HID: wacom: Add speed setting for Intuos4 WLPrzemo Firszt1-4/+13
Add option to change reporting speed for Intuos4 WL. The option is only internal to the module, but it will be extended to allow control over sysfs, as it is already implemented for Graphire. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-16HID: wacom: Move Graphire raport header check.Przemo Firszt1-5/+7
That check is valid only for Wacom Graphire, as the device raports always start with 0x03. Intuos4 WL high-speed raports begin with 0x04, so the check would be filtering out valid reports. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Acked-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-15HID: uclogic: Add support for UC-Logic TWHL850Nikolai Kondrashov3-0/+143
Add support for UC-Logic Wireless Tablet TWHL850. It is known to be sold as Genius MousePen M508W. This tablet has a bug in the default (compatibility) mode which is used in this driver: frame button assignments are mixed up. This is to be fixed with a driver supporting the vendor-specific protocol. Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-14HID: explain the signed/unsigned handling in hid_add_field()Jiri Kosina1-0/+1
Put a comment that clarifies the condition that handles both signed and unsigned case for logical min/max in hid_add_field(). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-14HID: handle logical min/max signedness properly in parsersrinivas pandruvada1-3/+9
When logical maximum is 0xffffffff, the parser fails even if logical minimum is more than 0. By HID specification this is a valid combination. Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-11HID: logitech: read all 32 bits of report type bitfieldJonathan Nieder1-2/+3
On big-endian systems (e.g., Apple PowerBook), trying to use a logitech wireless mouse with the Logitech Unifying Receiver does not work with v3.2 and later kernels. The device doesn't show up in /dev/input. Older kernels work fine. That is because the new hid-logitech-dj driver claims the device. The device arrival notification appears: 20 00 41 02 00 00 00 00 00 00 00 00 00 00 00 and we read the report_types bitfield (02 00 00 00) to find out what kind of device it is. Unfortunately the driver only reads the first 8 bits and treats that value as a 32-bit little-endian number, so on a powerpc the report type seems to be 0x02000000 and is not recognized. Even on little-endian machines, connecting a media center remote control (report type 00 01 00 00) with this driver loaded would presumably fail for the same reason. Fix both problems by using get_unaligned_le32() to read all four bytes, which is a little clearer anyway. After this change, the wireless mouse works on Hugo's PowerBook again. Based on a patch by Nestor Lopez Casado. Addresses http://bugs.debian.org/671292 Reported-by: Hugo Osvaldo Barrera <hugo@osvaldobarrera.com.ar> Inspired-by: Nestor Lopez Casado <nlopezcasad@logitech.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Nestor Lopez Casado <nlopezcasad@logitech.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-11HID: wacom: Add LED selector control for Wacom Intuos4 WLPrzemo Firszt2-0/+127
Add sysfs attribute to control LED selector on Wacom Intuos4. There are 4 different LEDs on the tablet and they can be turned on by something like: echo 50 > /sys/class/leds/(device # here)\:selector\:1/brightness Only one can be lit at a time. The brightness range is 0 to 127. This patch also contains short ABI description. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-10HID: hid-multitouch: fix wrong protocol detectionBenjamin Tissoires1-12/+46
The previous implementation introduced a randomness in the splitting of the different touches reported by the device. This version is more robust as we don't rely on hi->input->absbit, but on our own structure. This also prepares hid-multitouch to better support Win8 devices. [Jiri Kosina <jkosina@suse.cz>: fix build] Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Acked-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-09HID: wiimote: Fix IR data parserDavid Herrmann1-11/+5
We incorrectly parse incoming IR data. The extra byte contains the upper bits and not the lower bits of the x/y coordinates. User-space expects absolute position data from us so this patch does not break existing applications. On the contrary, it extends the virtual view and fixes garbage reports for margin areas of the virtual screen. Cc: stable@kernel.org Reported-by: Peter Bukovsky <bukovsky.peter@gmail.com> Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-07HID: wacom: Add tilt reporting for Intuos4 WLPrzemo Firszt1-0/+7
Tile is reported to input subsystem as reported by the device without any modifications. It means that tilt X/Y range is 0 to 127 and it's not centered on zero. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-05HID: multitouch: MT interface matching for BaantoJiri Kosina1-1/+1
Baanto device entry needs to be altered in the same way other device entries have been changed in 2c2110e90b5 ("HID: hid-multitouch: Only match MT interfaces"). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-05Merge branch 'multitouch' into device-groupsJiri Kosina3-0/+8
I am merging multitouch branch into device-groups so that support for Baanto device can be adjusted accordingly to the new autoloading patches. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-05HID: hid-multitouch: Only match MT interfacesHenrik Rydberg1-70/+73
All known hid-multitouch devices currently match any device group. However, some devices present interfaces belonging to different groups, resulting in a race between the hid-generic and hid-multitouch modules. This patch narrows the MT device list to match only HID_GROUP_MULTITOUCH, which solves the problem. As an exception, the USB_DEVICE_ID_CYPRESS_TRUETOUCH panel is not modified, in order to suppress the unwanted extra interfaces of the device. Reported-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-01USB: hid-core.c: remove dbg() usageGreg Kroah-Hartman1-2/+2
dbg() was a very old USB-specific macro that should no longer be used. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01usbhid: prevent deadlock during timeoutOliver Neukum1-6/+55
On some HCDs usb_unlink_urb() can directly call the completion handler. That limits the spinlocks that can be taken in the handler to locks not held while calling usb_unlink_urb() To prevent a race with resubmission, this patch exposes usbcore's infrastructure for blocking submission, uses it and so drops the lock without causing a race in usbhid. Signed-off-by: Oliver Neukum <oneukum@suse.de> Acked-by: Jiri Kosina <jkosina@suse.cz> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-01HID: Create a common generic driverHenrik Rydberg4-16/+67
Move the hid drivers of the bus drivers to a common generic hid driver, and make it a proper module. This ought to simplify device handling moving forward. Cc: Gustavo Padovan <gustavo@padovan.org> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-01HID: hid-multitouch: Switch to device groupsHenrik Rydberg3-91/+23
Switch the driver over to device group handling. By adding the HID_GROUP_MULTITOUCH group to hid-core, hid-generic will no longer match multitouch devices. By adding the HID_GROUP_MULTITOUCH entry to the device list, hid-multitouch will match all unknown multitouch devices, and udev will automatically load the module. Since HID_QUIRK_MULTITOUCH never gets set, the special quirks handling can be removed. Since all HID MT devices have HID_DG_CONTACTID, they can be removed from the hid_have_special_driver list. With this patch, the unknown device ids are no longer NULL, so the code is modified to check for the generic entry instead. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-01HID: Create a generic device groupHenrik Rydberg2-9/+2
Devices that do not have a special driver are handled by the generic driver. This patch does the same thing using device groups; Instead of forcing a particular driver, the appropriate driver is picked up by udev. As a consequence, one can now move a device from generic to specific handling by a simple rebind. By adding a new device id to the generic driver, the same thing can be done in reverse. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-01HID: Allow bus wildcard matchingHenrik Rydberg1-1/+1
Most HID drivers do not need to know what bus driver is in use. A generic group driver can drive any hid device, and the device list should not need to be duplicated for each new bus. This patch adds wildcard matching to the HID bus, simplifying device list handling for group drivers. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-01HID: Scan the device for group info before adding itHenrik Rydberg1-0/+62
In order to allow the report descriptor to influence the hid device properties, one needs to parse the descriptor early, without reference to any driver. Scan the descriptor for group information during device add, before the device has been broadcast to userland. The device modalias will contain group information which can be used to differentiate between modules. For starters, just handle the generic group. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-01HID: Add device group to modaliasHenrik Rydberg1-2/+22
HID devices are only partially presented to userland. Hotplugged devices emit events containing a modalias based on the basic bus, vendor and product entities. However, in practise a hid device can depend on details such as a single usb interface or a particular item in a report descriptor. This patch adds a device group to the hid device id, and broadcasts it using uevent and the device modalias. The module alias generation is modified to match. As a consequence, a device with a non-zero group will be processed by the corresponding group driver instead of by the generic hid driver. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-01HID: Handle driver-specific device descriptor in coreHenrik Rydberg1-22/+90
The low-level driver can read the report descriptor, but it cannot determine driver-specific changes to it. The hid core can fixup and parse the report descriptor during driver attach, but does not have direct access to the descriptor when doing so. To be able to handle attach/detach of hid drivers properly, a semantic change to hid_parse_report() is needed. This function has been used in two ways, both as descriptor reader in the ll drivers and as a parsor in the probe of the drivers. This patch splits the usage by introducing hid_open_report(), and modifies the hid_parse() macro to call hid_open_report() instead. The only usage of hid_parse_report() is then to read and store the device descriptor. As a consequence, we can handle the report fixups automatically inside the hid core. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Tested-by: Nikolai Kondrashov <spbnick@gmail.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-01HID: hid-logitech: Collect report descriptors before sendingHenrik Rydberg1-42/+29
The current code allows several consecutive calls to hid_parse_report(), which may have happened to work before, but would cause a memory leak and generally be incorrect. This patch collects all the reports before sending them once. Cc: Nestor Lopez Casado <nlopezcasad@logitech.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-01HID: hid-hyperv: Do not use hid_parse_report() directlyHenrik Rydberg1-2/+12
Upcoming changes will split the semantics of hid_parse_report() and hid_parse(), so make sure drivers use hid_parse() in probe(). Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-27HID: hidraw: add proper error handling to raw event reportingJiri Kosina2-11/+24
If kmemdup() in hidraw_report_event() fails, we are not propagating this fact properly. Let hidraw_report_event() and hid_report_raw_event() return an error value to the caller. Reported-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-27HID: hiddev: Use vzalloc to allocate hiddev_listHavard Skinnemoen1-4/+5
Everytime a HID device is opened, a new hiddev_list is allocated with kzalloc. This requires 64KB of physically contiguous memory, which could easily push a heavily loaded system over the edge. Allocating the same amount of memory with vmalloc shouldn't be nearly as demanding, so let's do that instead. The memory isn't used for DMA and doesn't look particularly performance sensitive, so this should be safe. Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-25USB: usbmouse.c: remove err() usageGreg Kroah-Hartman1-3/+4
err() was a very old USB-specific macro that I thought had gone away. This patch removes it from being used in the driver and uses dev_err() instead. CC: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-24HID: add Kconfig text to HID_BATTERY_STRENGTHJiri Kosina1-1/+5
HID_BATTERY_STRENGTH is missing both help text and description text. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-23HID: hid-lg4ff: remove unused label in !LEDS_CLASS caseJiri Kosina1-2/+1
'out' label will be unused of CONFIG_LEDS_CLASS is unset. Move it into conditional block. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-23HID: hid-lg4ff: Update CommentsSimon Wood1-3/+4
Updated comments to say that this driver now supports all Logitech gaming wheels, and not just the WiiWheel. Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-23HID: hid-lg4ff: Add support for G27 LEDsSimon Wood1-1/+157
This patch adds supports for controlling the LED 'tachometer' on the G27 wheel, via the LED subsystem. The 5 LEDs are arranged from right (1=grn, 2=grn, 3=yel, 4=yel, 5=red) and 'mirrored' to the left (10 LEDs in total). Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-23HID: apple: Add Apple wireless keyboard 2011 ANSI PIDAlexey Kaminsky1-0/+3
Signed-off-by: Alexey Kaminsky <me@akaminsky.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 18:27:44 +0000