diff options
Diffstat (limited to 'drivers/gpu/drm/i915/i915_irq.c')
| -rw-r--r-- | drivers/gpu/drm/i915/i915_irq.c | 173 |
1 files changed, 86 insertions, 87 deletions
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index afa55199b829..2d7618366b75 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -751,24 +751,32 @@ static u32 gm45_get_vblank_counter(struct drm_device *dev, int pipe) /* raw reads, only for fast reads of display block, no need for forcewake etc. */ #define __raw_i915_read32(dev_priv__, reg__) readl((dev_priv__)->regs + (reg__)) -static bool ilk_pipe_in_vblank_locked(struct drm_device *dev, enum pipe pipe) +static int __intel_get_crtc_scanline(struct intel_crtc *crtc) { + struct drm_device *dev = crtc->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - uint32_t status; - int reg; + const struct drm_display_mode *mode = &crtc->config.adjusted_mode; + enum pipe pipe = crtc->pipe; + int vtotal = mode->crtc_vtotal; + int position; - if (INTEL_INFO(dev)->gen >= 8) { - status = GEN8_PIPE_VBLANK; - reg = GEN8_DE_PIPE_ISR(pipe); - } else if (INTEL_INFO(dev)->gen >= 7) { - status = DE_PIPE_VBLANK_IVB(pipe); - reg = DEISR; - } else { - status = DE_PIPE_VBLANK(pipe); - reg = DEISR; - } + if (mode->flags & DRM_MODE_FLAG_INTERLACE) + vtotal /= 2; + + if (IS_GEN2(dev)) + position = __raw_i915_read32(dev_priv, PIPEDSL(pipe)) & DSL_LINEMASK_GEN2; + else + position = __raw_i915_read32(dev_priv, PIPEDSL(pipe)) & DSL_LINEMASK_GEN3; - return __raw_i915_read32(dev_priv, reg) & status; + /* + * Scanline counter increments at leading edge of hsync, and + * it starts counting from vtotal-1 on the first active line. + * That means the scanline counter value is always one less + * than what we would expect. Ie. just after start of vblank, + * which also occurs at start of hsync (on the last active line), + * the scanline counter will read vblank_start-1. + */ + return (position + 1) % vtotal; } static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe, @@ -780,7 +788,7 @@ static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe, struct intel_crtc *intel_crtc = to_intel_crtc(crtc); const struct drm_display_mode *mode = &intel_crtc->config.adjusted_mode; int position; - int vbl_start, vbl_end, htotal, vtotal; + int vbl_start, vbl_end, hsync_start, htotal, vtotal; bool in_vbl = true; int ret = 0; unsigned long irqflags; @@ -792,6 +800,7 @@ static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe, } htotal = mode->crtc_htotal; + hsync_start = mode->crtc_hsync_start; vtotal = mode->crtc_vtotal; vbl_start = mode->crtc_vblank_start; vbl_end = mode->crtc_vblank_end; @@ -810,7 +819,7 @@ static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe, * following code must not block on uncore.lock. */ spin_lock_irqsave(&dev_priv->uncore.lock, irqflags); - + /* preempt_disable_rt() should go right here in PREEMPT_RT patchset. */ /* Get optional system timestamp before query. */ @@ -821,68 +830,7 @@ static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe, /* No obvious pixelcount register. Only query vertical * scanout position from Display scan line register. */ - if (IS_GEN2(dev)) - position = __raw_i915_read32(dev_priv, PIPEDSL(pipe)) & DSL_LINEMASK_GEN2; - else - position = __raw_i915_read32(dev_priv, PIPEDSL(pipe)) & DSL_LINEMASK_GEN3; - - if (HAS_DDI(dev)) { - /* - * On HSW HDMI outputs there seems to be a 2 line - * difference, whereas eDP has the normal 1 line - * difference that earlier platforms have. External - * DP is unknown. For now just check for the 2 line - * difference case on all output types on HSW+. - * - * This might misinterpret the scanline counter being - * one line too far along on eDP, but that's less - * dangerous than the alternative since that would lead - * the vblank timestamp code astray when it sees a - * scanline count before vblank_start during a vblank - * interrupt. - */ - in_vbl = ilk_pipe_in_vblank_locked(dev, pipe); - if ((in_vbl && (position == vbl_start - 2 || - position == vbl_start - 1)) || - (!in_vbl && (position == vbl_end - 2 || - position == vbl_end - 1))) - position = (position + 2) % vtotal; - } else if (HAS_PCH_SPLIT(dev)) { - /* - * The scanline counter increments at the leading edge - * of hsync, ie. it completely misses the active portion - * of the line. Fix up the counter at both edges of vblank - * to get a more accurate picture whether we're in vblank - * or not. - */ - in_vbl = ilk_pipe_in_vblank_locked(dev, pipe); - if ((in_vbl && position == vbl_start - 1) || - (!in_vbl && position == vbl_end - 1)) - position = (position + 1) % vtotal; - } else { - /* - * ISR vblank status bits don't work the way we'd want - * them to work on non-PCH platforms (for - * ilk_pipe_in_vblank_locked()), and there doesn't - * appear any other way to determine if we're currently - * in vblank. - * - * Instead let's assume that we're already in vblank if - * we got called from the vblank interrupt and the - * scanline counter value indicates that we're on the - * line just prior to vblank start. This should result - * in the correct answer, unless the vblank interrupt - * delivery really got delayed for almost exactly one - * full frame/field. - */ - if (flags & DRM_CALLED_FROM_VBLIRQ && - position == vbl_start - 1) { - position = (position + 1) % vtotal; - - /* Signal this correction as "applied". */ - ret |= 0x8; - } - } + position = __intel_get_crtc_scanline(intel_crtc); } else { /* Have access to pixelcount since start of frame. * We can split this into vertical and horizontal @@ -894,6 +842,17 @@ static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe, vbl_start *= htotal; vbl_end *= htotal; vtotal *= htotal; + + /* + * Start of vblank interrupt is triggered at start of hsync, + * just prior to the first active line of vblank. However we + * consider lines to start at the leading edge of horizontal + * active. So, should we get here before we've crossed into + * the horizontal active of the first line in vblank, we would + * not set the DRM_SCANOUTPOS_INVBL flag. In order to fix that, + * always add htotal-hsync_start to the current pixel position. + */ + position = (position + htotal - hsync_start) % vtotal; } /* Get optional system timestamp after query. */ @@ -932,6 +891,19 @@ static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe, return ret; } +int intel_get_crtc_scanline(struct intel_crtc *crtc) +{ + struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; + unsigned long irqflags; + int position; + + spin_lock_irqsave(&dev_priv->uncore.lock, irqflags); + position = __intel_get_crtc_scanline(crtc); + spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags); + + return position; +} + static int i915_get_vblank_timestamp(struct drm_device *dev, int pipe, int *max_error, struct timeval *vblank_time, @@ -1347,13 +1319,16 @@ static irqreturn_t gen8_gt_irq_handler(struct drm_device *dev, DRM_ERROR("The master control interrupt lied (GT0)!\n"); } - if (master_ctl & GEN8_GT_VCS1_IRQ) { + if (master_ctl & (GEN8_GT_VCS1_IRQ | GEN8_GT_VCS2_IRQ)) { tmp = I915_READ(GEN8_GT_IIR(1)); if (tmp) { ret = IRQ_HANDLED; vcs = tmp >> GEN8_VCS1_IRQ_SHIFT; if (vcs & GT_RENDER_USER_INTERRUPT) notify_ring(dev, &dev_priv->ring[VCS]); + vcs = tmp >> GEN8_VCS2_IRQ_SHIFT; + if (vcs & GT_RENDER_USER_INTERRUPT) + notify_ring(dev, &dev_priv->ring[VCS2]); I915_WRITE(GEN8_GT_IIR(1), tmp); } else DRM_ERROR("The master control interrupt lied (GT1)!\n"); @@ -1581,6 +1556,19 @@ static void gen6_rps_irq_handler(struct drm_i915_private *dev_priv, u32 pm_iir) } } +static bool intel_pipe_handle_vblank(struct drm_device *dev, enum pipe pipe) +{ + struct intel_crtc *crtc; + + if (!drm_handle_vblank(dev, pipe)) + return false; + + crtc = to_intel_crtc(intel_get_crtc_for_pipe(dev, pipe)); + wake_up(&crtc->vbl_wait); + + return true; +} + static void valleyview_pipestat_irq_handler(struct drm_device *dev, u32 iir) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -1632,7 +1620,7 @@ static void valleyview_pipestat_irq_handler(struct drm_device *dev, u32 iir) for_each_pipe(pipe) { if (pipe_stats[pipe] & PIPE_START_VBLANK_INTERRUPT_STATUS) - drm_handle_vblank(dev, pipe); + intel_pipe_handle_vblank(dev, pipe); if (pipe_stats[pipe] & PLANE_FLIP_DONE_INT_STATUS_VLV) { intel_prepare_page_flip(dev, pipe); @@ -1875,7 +1863,7 @@ static void ilk_display_irq_handler(struct drm_device *dev, u32 de_iir) for_each_pipe(pipe) { if (de_iir & DE_PIPE_VBLANK(pipe)) - drm_handle_vblank(dev, pipe); + intel_pipe_handle_vblank(dev, pipe); if (de_iir & DE_PIPE_FIFO_UNDERRUN(pipe)) if (intel_set_cpu_fifo_underrun_reporting(dev, pipe, false)) @@ -1925,7 +1913,7 @@ static void ivb_display_irq_handler(struct drm_device *dev, u32 de_iir) for_each_pipe(pipe) { if (de_iir & (DE_PIPE_VBLANK_IVB(pipe))) - drm_handle_vblank(dev, pipe); + intel_pipe_handle_vblank(dev, pipe); /* plane/pipes map 1:1 on ilk+ */ if (de_iir & DE_PLANE_FLIP_DONE_IVB(pipe)) { @@ -2068,7 +2056,7 @@ static irqreturn_t gen8_irq_handler(int irq, void *arg) pipe_iir = I915_READ(GEN8_DE_PIPE_IIR(pipe)); if (pipe_iir & GEN8_PIPE_VBLANK) - drm_handle_vblank(dev, pipe); + intel_pipe_handle_vblank(dev, pipe); if (pipe_iir & GEN8_PIPE_PRIMARY_FLIP_DONE) { intel_prepare_page_flip(dev, pipe); @@ -2185,6 +2173,14 @@ static void i915_error_work_func(struct work_struct *work) reset_event); /* + * In most cases it's guaranteed that we get here with an RPM + * reference held, for example because there is a pending GPU + * request that won't finish until the reset is done. This + * isn't the case at least when we get here by doing a + * simulated reset via debugs, so get an RPM reference. + */ + intel_runtime_pm_get(dev_priv); + /* * All state reset _must_ be completed before we update the * reset counter, for otherwise waiters might miss the reset * pending state and not properly drop locks, resulting in @@ -2194,6 +2190,8 @@ static void i915_error_work_func(struct work_struct *work) intel_display_handle_reset(dev); + intel_runtime_pm_put(dev_priv); + if (ret == 0) { /* * After all the gem state is reset, increment the reset @@ -2597,8 +2595,7 @@ semaphore_wait_to_signaller_ring(struct intel_ring_buffer *ring, u32 ipehr) if(ring == signaller) continue; - if (sync_bits == - signaller->semaphore_register[ring->id]) + if (sync_bits == signaller->semaphore.mbox.wait[ring->id]) return signaller; } } @@ -3315,6 +3312,8 @@ static void valleyview_irq_uninstall(struct drm_device *dev) if (!dev_priv) return; + I915_WRITE(VLV_MASTER_IER, 0); + intel_hpd_irq_uninstall(dev_priv); for_each_pipe(pipe) @@ -3404,7 +3403,7 @@ static bool i8xx_handle_vblank(struct drm_device *dev, struct drm_i915_private *dev_priv = dev->dev_private; u16 flip_pending = DISPLAY_PLANE_FLIP_PENDING(plane); - if (!drm_handle_vblank(dev, pipe)) + if (!intel_pipe_handle_vblank(dev, pipe)) return false; if ((iir & flip_pending) == 0) @@ -3589,7 +3588,7 @@ static bool i915_handle_vblank(struct drm_device *dev, struct drm_i915_private *dev_priv = dev->dev_private; u32 flip_pending = DISPLAY_PLANE_FLIP_PENDING(plane); - if (!drm_handle_vblank(dev, pipe)) + if (!intel_pipe_handle_vblank(dev, pipe)) return false; if ((iir & flip_pending) == 0) |