diff options
Diffstat (limited to 'arch/sh/kernel/cpu/shmobile/sleep.S')
| -rw-r--r-- | arch/sh/kernel/cpu/shmobile/sleep.S | 344 |
1 files changed, 193 insertions, 151 deletions
diff --git a/arch/sh/kernel/cpu/shmobile/sleep.S b/arch/sh/kernel/cpu/shmobile/sleep.S index a439e6c7824f..e9dd7fa0abd2 100644 --- a/arch/sh/kernel/cpu/shmobile/sleep.S +++ b/arch/sh/kernel/cpu/shmobile/sleep.S @@ -20,79 +20,103 @@ * Kernel mode register usage, see entry.S: * k0 scratch * k1 scratch - * k4 scratch */ #define k0 r0 #define k1 r1 -#define k4 r4 -/* manage self-refresh and enter standby mode. +/* manage self-refresh and enter standby mode. must be self-contained. * this code will be copied to on-chip memory and executed from there. */ + .balign 4 +ENTRY(sh_mobile_sleep_enter_start) - .balign 4096,0,4096 -ENTRY(sh_mobile_standby) + /* save mode flags */ + mov.l r4, @(SH_SLEEP_MODE, r5) /* save original vbr */ - stc vbr, r1 - mova saved_vbr, r0 - mov.l r1, @r0 + stc vbr, r0 + mov.l r0, @(SH_SLEEP_VBR, r5) /* point vbr to our on-chip memory page */ ldc r5, vbr /* save return address */ - mova saved_spc, r0 - sts pr, r5 - mov.l r5, @r0 + sts pr, r0 + mov.l r0, @(SH_SLEEP_SPC, r5) /* save sr */ - mova saved_sr, r0 - stc sr, r5 - mov.l r5, @r0 + stc sr, r0 + mov.l r0, @(SH_SLEEP_SR, r5) - /* save mode flags */ - mova saved_mode, r0 - mov.l r4, @r0 + /* save sp */ + mov.l r15, @(SH_SLEEP_SP, r5) + + /* save stbcr */ + bsr save_register + mov #SH_SLEEP_REG_STBCR, r0 + + /* save mmu and cache context if needed */ + mov.l @(SH_SLEEP_MODE, r5), r0 + tst #SUSP_SH_MMU, r0 + bt skip_mmu_save_disable + + /* save mmu state */ + bsr save_register + mov #SH_SLEEP_REG_PTEH, r0 + + bsr save_register + mov #SH_SLEEP_REG_PTEL, r0 + + bsr save_register + mov #SH_SLEEP_REG_TTB, r0 + + bsr save_register + mov #SH_SLEEP_REG_TEA, r0 + + bsr save_register + mov #SH_SLEEP_REG_MMUCR, r0 + + bsr save_register + mov #SH_SLEEP_REG_PTEA, r0 + + bsr save_register + mov #SH_SLEEP_REG_PASCR, r0 - /* put mode flags in r0 */ - mov r4, r0 + bsr save_register + mov #SH_SLEEP_REG_IRMCR, r0 + /* invalidate TLBs and disable the MMU */ + bsr get_register + mov #SH_SLEEP_REG_MMUCR, r0 + mov #4, r1 + mov.l r1, @r0 + icbi @r0 + + /* save cache registers and disable caches */ + bsr save_register + mov #SH_SLEEP_REG_CCR, r0 + + bsr save_register + mov #SH_SLEEP_REG_RAMCR, r0 + + bsr get_register + mov #SH_SLEEP_REG_CCR, r0 + mov #0, r1 + mov.l r1, @r0 + icbi @r0 + +skip_mmu_save_disable: + /* call self-refresh entering code if needed */ + mov.l @(SH_SLEEP_MODE, r5), r0 tst #SUSP_SH_SF, r0 bt skip_set_sf -#ifdef CONFIG_CPU_SUBTYPE_SH7724 - /* DBSC: put memory in self-refresh mode */ - mov.l dben_reg, r4 - mov.l dben_data0, r1 - mov.l r1, @r4 - - mov.l dbrfpdn0_reg, r4 - mov.l dbrfpdn0_data0, r1 - mov.l r1, @r4 - - mov.l dbcmdcnt_reg, r4 - mov.l dbcmdcnt_data0, r1 - mov.l r1, @r4 - - mov.l dbcmdcnt_reg, r4 - mov.l dbcmdcnt_data1, r1 - mov.l r1, @r4 - - mov.l dbrfpdn0_reg, r4 - mov.l dbrfpdn0_data1, r1 - mov.l r1, @r4 -#else - /* SBSC: disable power down and put in self-refresh mode */ - mov.l 1f, r4 - mov.l 2f, r1 - mov.l @r4, r2 - or r1, r2 - mov.l 3f, r3 - and r3, r2 - mov.l r2, @r4 -#endif + + mov.l @(SH_SLEEP_SF_PRE, r5), r0 + jsr @r0 + nop skip_set_sf: + mov.l @(SH_SLEEP_MODE, r5), r0 tst #SUSP_SH_STANDBY, r0 bt test_rstandby @@ -104,6 +128,12 @@ test_rstandby: tst #SUSP_SH_RSTANDBY, r0 bt test_ustandby + /* setup BAR register */ + bsr get_register + mov #SH_SLEEP_REG_BAR, r0 + mov.l @(SH_SLEEP_RESUME, r5), r1 + mov.l r1, @r0 + /* set mode to "r-standby mode" */ bra do_sleep mov #0x20, r1 @@ -123,124 +153,136 @@ force_sleep: do_sleep: /* setup and enter selected standby mode */ - mov.l 5f, r4 - mov.l r1, @r4 + bsr get_register + mov #SH_SLEEP_REG_STBCR, r0 + mov.l r1, @r0 again: sleep bra again nop -restore_jump_vbr: +save_register: + add #SH_SLEEP_BASE_ADDR, r0 + mov.l @(r0, r5), r1 + add #-SH_SLEEP_BASE_ADDR, r0 + mov.l @r1, r1 + add #SH_SLEEP_BASE_DATA, r0 + mov.l r1, @(r0, r5) + add #-SH_SLEEP_BASE_DATA, r0 + rts + nop + +get_register: + add #SH_SLEEP_BASE_ADDR, r0 + mov.l @(r0, r5), r0 + rts + nop +ENTRY(sh_mobile_sleep_enter_end) + + .balign 4 +ENTRY(sh_mobile_sleep_resume_start) + + /* figure out start address */ + bsr 0f + nop +0: + sts pr, k1 + mov.l 1f, k0 + and k0, k1 + + /* store pointer to data area in VBR */ + ldc k1, vbr + + /* setup sr with saved sr */ + mov.l @(SH_SLEEP_SR, k1), k0 + ldc k0, sr + + /* now: user register set! */ + stc vbr, r5 + /* setup spc with return address to c code */ - mov.l saved_spc, k0 - ldc k0, spc + mov.l @(SH_SLEEP_SPC, r5), r0 + ldc r0, spc /* restore vbr */ - mov.l saved_vbr, k0 - ldc k0, vbr + mov.l @(SH_SLEEP_VBR, r5), r0 + ldc r0, vbr /* setup ssr with saved sr */ - mov.l saved_sr, k0 - ldc k0, ssr + mov.l @(SH_SLEEP_SR, r5), r0 + ldc r0, ssr - /* get mode flags */ - mov.l saved_mode, k0 + /* restore sp */ + mov.l @(SH_SLEEP_SP, r5), r15 -done_sleep: - /* reset standby mode to sleep mode */ - mov.l 5f, k4 - mov #0x00, k1 - mov.l k1, @k4 + /* restore sleep mode register */ + bsr restore_register + mov #SH_SLEEP_REG_STBCR, r0 - tst #SUSP_SH_SF, k0 + /* call self-refresh resume code if needed */ + mov.l @(SH_SLEEP_MODE, r5), r0 + tst #SUSP_SH_SF, r0 bt skip_restore_sf -#ifdef CONFIG_CPU_SUBTYPE_SH7724 - /* DBSC: put memory in auto-refresh mode */ - mov.l dbrfpdn0_reg, k4 - mov.l dbrfpdn0_data0, k1 - mov.l k1, @k4 - - nop /* sleep 140 ns */ - nop - nop - nop - - mov.l dbcmdcnt_reg, k4 - mov.l dbcmdcnt_data0, k1 - mov.l k1, @k4 - - mov.l dbcmdcnt_reg, k4 - mov.l dbcmdcnt_data1, k1 - mov.l k1, @k4 - - mov.l dben_reg, k4 - mov.l dben_data1, k1 - mov.l k1, @k4 - - mov.l dbrfpdn0_reg, k4 - mov.l dbrfpdn0_data2, k1 - mov.l k1, @k4 -#else - /* SBSC: set auto-refresh mode */ - mov.l 1f, k4 - mov.l @k4, k0 - mov.l 4f, k1 - and k1, k0 - mov.l k0, @k4 - mov.l 6f, k4 - mov.l 8f, k0 - mov.l @k4, k1 - mov #-1, k4 - add k4, k1 - or k1, k0 - mov.l 7f, k1 - mov.l k0, @k1 -#endif + mov.l @(SH_SLEEP_SF_POST, r5), r0 + jsr @r0 + nop + skip_restore_sf: - /* jump to vbr vector */ - mov.l saved_vbr, k0 - mov.l offset_vbr, k4 - add k4, k0 - jmp @k0 + /* restore mmu and cache state if needed */ + mov.l @(SH_SLEEP_MODE, r5), r0 + tst #SUSP_SH_MMU, r0 + bt skip_restore_mmu + + /* restore mmu state */ + bsr restore_register + mov #SH_SLEEP_REG_PTEH, r0 + + bsr restore_register + mov #SH_SLEEP_REG_PTEL, r0 + + bsr restore_register + mov #SH_SLEEP_REG_TTB, r0 + + bsr restore_register + mov #SH_SLEEP_REG_TEA, r0 + + bsr restore_register + mov #SH_SLEEP_REG_PTEA, r0 + + bsr restore_register + mov #SH_SLEEP_REG_PASCR, r0 + + bsr restore_register + mov #SH_SLEEP_REG_IRMCR, r0 + + bsr restore_register + mov #SH_SLEEP_REG_MMUCR, r0 + icbi @r0 + + /* restore cache settings */ + bsr restore_register + mov #SH_SLEEP_REG_RAMCR, r0 + icbi @r0 + + bsr restore_register + mov #SH_SLEEP_REG_CCR, r0 + icbi @r0 + +skip_restore_mmu: + rte nop - .balign 4 -saved_mode: .long 0 -saved_spc: .long 0 -saved_sr: .long 0 -saved_vbr: .long 0 -offset_vbr: .long 0x600 -#ifdef CONFIG_CPU_SUBTYPE_SH7724 -dben_reg: .long 0xfd000010 /* DBEN */ -dben_data0: .long 0 -dben_data1: .long 1 -dbrfpdn0_reg: .long 0xfd000040 /* DBRFPDN0 */ -dbrfpdn0_data0: .long 0 -dbrfpdn0_data1: .long 1 -dbrfpdn0_data2: .long 0x00010000 -dbcmdcnt_reg: .long 0xfd000014 /* DBCMDCNT */ -dbcmdcnt_data0: .long 2 -dbcmdcnt_data1: .long 4 -#else -1: .long 0xfe400008 /* SDCR0 */ -2: .long 0x00000400 -3: .long 0xffff7fff -4: .long 0xfffffbff -#endif -5: .long 0xa4150020 /* STBCR */ -6: .long 0xfe40001c /* RTCOR */ -7: .long 0xfe400018 /* RTCNT */ -8: .long 0xa55a0000 - - -/* interrupt vector @ 0x600 */ - .balign 0x400,0,0x400 - .long 0xdeadbeef - .balign 0x200,0,0x200 - bra restore_jump_vbr +restore_register: + add #SH_SLEEP_BASE_DATA, r0 + mov.l @(r0, r5), r1 + add #-SH_SLEEP_BASE_DATA, r0 + add #SH_SLEEP_BASE_ADDR, r0 + mov.l @(r0, r5), r0 + mov.l r1, @r0 + rts nop -sh_mobile_standby_end: -ENTRY(sh_mobile_standby_size) - .long sh_mobile_standby_end - sh_mobile_standby + .balign 4 +1: .long ~0x7ff +ENTRY(sh_mobile_sleep_resume_end) |