diff options
| -rw-r--r-- | arch/arm/mach-imx/Makefile.boot | 34 | ||||
| -rw-r--r-- | arch/arm/mach-imx/clock-imx6q.c | 17 | ||||
| -rw-r--r-- | arch/arm/mach-mx5/clock-mx51-mx53.c | 4 | ||||
| -rw-r--r-- | arch/arm/plat-mxc/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci-esdhc-imx.c | 8 |
5 files changed, 47 insertions, 20 deletions
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot index 22d85889f622..cfede5768aa0 100644 --- a/arch/arm/mach-imx/Makefile.boot +++ b/arch/arm/mach-imx/Makefile.boot @@ -1,22 +1,26 @@ -zreladdr-$(CONFIG_ARCH_MX1) += 0x08008000 -params_phys-$(CONFIG_ARCH_MX1) := 0x08000100 -initrd_phys-$(CONFIG_ARCH_MX1) := 0x08800000 +zreladdr-$(CONFIG_SOC_IMX1) += 0x08008000 +params_phys-$(CONFIG_SOC_IMX1) := 0x08000100 +initrd_phys-$(CONFIG_SOC_IMX1) := 0x08800000 -zreladdr-$(CONFIG_MACH_MX21) += 0xC0008000 -params_phys-$(CONFIG_MACH_MX21) := 0xC0000100 -initrd_phys-$(CONFIG_MACH_MX21) := 0xC0800000 +zreladdr-$(CONFIG_SOC_IMX21) += 0xC0008000 +params_phys-$(CONFIG_SOC_IMX21) := 0xC0000100 +initrd_phys-$(CONFIG_SOC_IMX21) := 0xC0800000 -zreladdr-$(CONFIG_ARCH_MX25) += 0x80008000 -params_phys-$(CONFIG_ARCH_MX25) := 0x80000100 -initrd_phys-$(CONFIG_ARCH_MX25) := 0x80800000 +zreladdr-$(CONFIG_SOC_IMX25) += 0x80008000 +params_phys-$(CONFIG_SOC_IMX25) := 0x80000100 +initrd_phys-$(CONFIG_SOC_IMX25) := 0x80800000 -zreladdr-$(CONFIG_MACH_MX27) += 0xA0008000 -params_phys-$(CONFIG_MACH_MX27) := 0xA0000100 -initrd_phys-$(CONFIG_MACH_MX27) := 0xA0800000 +zreladdr-$(CONFIG_SOC_IMX27) += 0xA0008000 +params_phys-$(CONFIG_SOC_IMX27) := 0xA0000100 +initrd_phys-$(CONFIG_SOC_IMX27) := 0xA0800000 -zreladdr-$(CONFIG_ARCH_MX3) += 0x80008000 -params_phys-$(CONFIG_ARCH_MX3) := 0x80000100 -initrd_phys-$(CONFIG_ARCH_MX3) := 0x80800000 +zreladdr-$(CONFIG_SOC_IMX31) += 0x80008000 +params_phys-$(CONFIG_SOC_IMX31) := 0x80000100 +initrd_phys-$(CONFIG_SOC_IMX31) := 0x80800000 + +zreladdr-$(CONFIG_SOC_IMX35) += 0x80008000 +params_phys-$(CONFIG_SOC_IMX35) := 0x80000100 +initrd_phys-$(CONFIG_SOC_IMX35) := 0x80800000 zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000 params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100 diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c index e0b926dfeced..613a1b993bff 100644 --- a/arch/arm/mach-imx/clock-imx6q.c +++ b/arch/arm/mach-imx/clock-imx6q.c @@ -1139,7 +1139,7 @@ static int _clk_set_rate(struct clk *clk, unsigned long rate) return -EINVAL; max_div = ((d->bm_pred >> d->bp_pred) + 1) * - ((d->bm_pred >> d->bp_pred) + 1); + ((d->bm_podf >> d->bp_podf) + 1); div = parent_rate / rate; if (div == 0) @@ -2002,6 +2002,21 @@ int __init mx6q_clocks_init(void) clk_set_rate(&asrc_serial_clk, 1500000); clk_set_rate(&enfc_clk, 11000000); + /* + * Before pinctrl API is available, we have to rely on the pad + * configuration set up by bootloader. For usdhc example here, + * u-boot sets up the pads for 49.5 MHz case, and we have to lower + * the usdhc clock from 198 to 49.5 MHz to match the pad configuration. + * + * FIXME: This is should be removed after pinctrl API is available. + * At that time, usdhc driver can call pinctrl API to change pad + * configuration dynamically per different usdhc clock settings. + */ + clk_set_rate(&usdhc1_clk, 49500000); + clk_set_rate(&usdhc2_clk, 49500000); + clk_set_rate(&usdhc3_clk, 49500000); + clk_set_rate(&usdhc4_clk, 49500000); + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"); base = of_iomap(np, 0); WARN_ON(!base); diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c index 6312425c0056..4cb276977190 100644 --- a/arch/arm/mach-mx5/clock-mx51-mx53.c +++ b/arch/arm/mach-mx5/clock-mx51-mx53.c @@ -1281,9 +1281,9 @@ DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET, NULL, NULL, &ipg_clk, &gpt_ipg_clk); DEFINE_CLOCK(pwm1_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG6_OFFSET, - NULL, NULL, &ipg_clk, NULL); + NULL, NULL, &ipg_perclk, NULL); DEFINE_CLOCK(pwm2_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG8_OFFSET, - NULL, NULL, &ipg_clk, NULL); + NULL, NULL, &ipg_perclk, NULL); /* I2C */ DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET, diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index a08a95107a63..b3a1f2b3ada3 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -10,7 +10,7 @@ choice config ARCH_IMX_V4_V5 bool "i.MX1, i.MX21, i.MX25, i.MX27" - select AUTO_ZRELADDR + select AUTO_ZRELADDR if !ZBOOT_ROM select ARM_PATCH_PHYS_VIRT help This enables support for systems based on the Freescale i.MX ARMv4 @@ -26,7 +26,7 @@ config ARCH_IMX_V6_V7 config ARCH_MX5 bool "i.MX50, i.MX51, i.MX53" - select AUTO_ZRELADDR + select AUTO_ZRELADDR if !ZBOOT_ROM select ARM_PATCH_PHYS_VIRT help This enables support for machines using Freescale's i.MX50 and i.MX53 diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index ae57769ba50d..4b976f00ea85 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -32,6 +32,7 @@ /* VENDOR SPEC register */ #define SDHCI_VENDOR_SPEC 0xC0 #define SDHCI_VENDOR_SPEC_SDIO_QUIRK 0x00000002 +#define SDHCI_WTMK_LVL 0x44 #define SDHCI_MIX_CTRL 0x48 /* @@ -476,6 +477,13 @@ static int __devinit sdhci_esdhc_imx_probe(struct platform_device *pdev) if (is_imx53_esdhc(imx_data)) imx_data->flags |= ESDHC_FLAG_MULTIBLK_NO_INT; + /* + * The imx6q ROM code will change the default watermark level setting + * to something insane. Change it back here. + */ + if (is_imx6q_usdhc(imx_data)) + writel(0x08100810, host->ioaddr + SDHCI_WTMK_LVL); + boarddata = &imx_data->boarddata; if (sdhci_esdhc_imx_probe_dt(pdev, boarddata) < 0) { if (!host->mmc->parent->platform_data) { |