Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Fix crash in ipvs tot_stats estimator, from Julian Anastasov.

 2) Fix OOPS in nf_nat on netns removal, from Florian Westphal.

 3) Really really really fix locking issues in slip and slcan tty write
    wakeups, from Tyler Hall.

 4) Fix checksum offloading in fec driver, from Fugang Duan.

 5) Off by one in BPF instruction limit test, from Kees Cook.

 6) Need to clear all TSO capability flags when doing software TSO in
    tg3 driver, from Prashant Sreedharan.

 7) Fix memory leak in vlan_reorder_header() error path, from Li
    RongQing.

 8) Fix various bugs in xen-netfront and xen-netback multiqueue support,
    from David Vrabel and Wei Liu.

 9) Fix deadlock in cxgb4 driver, from Li RongQing.

10) Prevent double free of no-cache DST entries, from Eric Dumazet.

11) Bad csum_start handling in skb_segment() leads to crashes when
    forwarding, from Tom Herbert.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits)
  net: fix setting csum_start in skb_segment()
  ipv4: fix dst race in sk_dst_get()
  net: filter: Use kcalloc/kmalloc_array to allocate arrays
  trivial: net: filter: Change kerneldoc parameter order
  trivial: net: filter: Fix typo in comment
  net: allwinner: emac: Add missing free_irq
  cxgb4: use dev_port to identify ports
  xen-netback: bookkeep number of active queues in our own module
  tg3: Change nvram command timeout value to 50ms
  cxgb4: Not need to hold the adap_rcu_lock lock when read adap_rcu_list
  be2net: fix qnq mode detection on VFs
  of: mdio: fixup of_phy_register_fixed_link parsing of new bindings
  at86rf230: fix irq setup
  net: phy: at803x: fix coccinelle warnings
  net/mlx4_core: Fix the error flow when probing with invalid VF configuration
  tulip: Poll link status more frequently for Comet chips
  net: huawei_cdc_ncm: increase command buffer size
  drivers: net: cpsw: fix dual EMAC stall when connected to same switch
  xen-netfront: recreate queues correctly when reconnecting
  xen-netfront: fix oops when disconnected from backend
  ...

43 files changed, 503 insertions, 222 deletions

diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig
index d9edcc94c2a8..97465ac5a2d5 100644
--- a/drivers/isdn/hisax/Kconfig
+++ b/drivers/isdn/hisax/Kconfig
@@ -16,7 +16,7 @@ config ISDN_DRV_HISAX
 	  also to the configuration option of the driver for your particular
 	  card, below.
 
-if ISDN_DRV_HISAX!=n
+if ISDN_DRV_HISAX
 
 comment "D-channel protocol features"
 
@@ -348,10 +348,6 @@ config HISAX_ENTERNOW_PCI
 	  This enables HiSax support for the Formula-n enter:now PCI
 	  ISDN card.
 
-endif
-
-if ISDN_DRV_HISAX
-
 config HISAX_DEBUG
 	bool "HiSax debugging"
 	help
@@ -420,11 +416,6 @@ config HISAX_FRITZ_PCIPNP
 	  (the latter also needs you to select "ISA Plug and Play support"
 	  from the menu "Plug and Play configuration")
 
-config HISAX_AVM_A1_PCMCIA
-	bool
-	depends on HISAX_AVM_A1_CS
-	default y
-
 endif
 
 endmenu
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 04f35f960cb8..3a451b6cd3d5 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1025,10 +1025,14 @@ static netdev_features_t bond_fix_features(struct net_device *dev,
 				 NETIF_F_FRAGLIST | NETIF_F_ALL_TSO | \
 				 NETIF_F_HIGHDMA | NETIF_F_LRO)
 
+#define BOND_ENC_FEATURES	(NETIF_F_ALL_CSUM | NETIF_F_SG | NETIF_F_RXCSUM |\
+				 NETIF_F_TSO | NETIF_F_GSO_UDP_TUNNEL)
+
 static void bond_compute_features(struct bonding *bond)
 {
 	unsigned int flags, dst_release_flag = IFF_XMIT_DST_RELEASE;
 	netdev_features_t vlan_features = BOND_VLAN_FEATURES;
+	netdev_features_t enc_features  = BOND_ENC_FEATURES;
 	struct net_device *bond_dev = bond->dev;
 	struct list_head *iter;
 	struct slave *slave;
@@ -1044,6 +1048,9 @@ static void bond_compute_features(struct bonding *bond)
 		vlan_features = netdev_increment_features(vlan_features,
 			slave->dev->vlan_features, BOND_VLAN_FEATURES);
 
+		enc_features = netdev_increment_features(enc_features,
+							 slave->dev->hw_enc_features,
+							 BOND_ENC_FEATURES);
 		dst_release_flag &= slave->dev->priv_flags;
 		if (slave->dev->hard_header_len > max_hard_header_len)
 			max_hard_header_len = slave->dev->hard_header_len;
@@ -1054,6 +1061,7 @@ static void bond_compute_features(struct bonding *bond)
 
 done:
 	bond_dev->vlan_features = vlan_features;
+	bond_dev->hw_enc_features = enc_features;
 	bond_dev->hard_header_len = max_hard_header_len;
 	bond_dev->gso_max_segs = gso_max_segs;
 	netif_set_gso_max_size(bond_dev, gso_max_size);
@@ -3975,6 +3983,7 @@ void bond_setup(struct net_device *bond_dev)
 				NETIF_F_HW_VLAN_CTAG_FILTER;
 
 	bond_dev->hw_features &= ~(NETIF_F_ALL_CSUM & ~NETIF_F_HW_CSUM);
+	bond_dev->hw_features |= NETIF_F_GSO_UDP_TUNNEL;
 	bond_dev->features |= bond_dev->hw_features;
 }
 
diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c
index dcf9196f6316..ea4d4f1a6411 100644
--- a/drivers/net/can/slcan.c
+++ b/drivers/net/can/slcan.c
@@ -52,6 +52,7 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/workqueue.h>
 #include <linux/can.h>
 #include <linux/can/skb.h>
 
@@ -85,6 +86,7 @@ struct slcan {
 	struct tty_struct	*tty;		/* ptr to TTY structure	     */
 	struct net_device	*dev;		/* easy for intr handling    */
 	spinlock_t		lock;
+	struct work_struct	tx_work;	/* Flushes transmit buffer   */
 
 	/* These are pointers to the malloc()ed frame buffers. */
 	unsigned char		rbuff[SLC_MTU];	/* receiver buffer	     */
@@ -309,36 +311,46 @@ static void slc_encaps(struct slcan *sl, struct can_frame *cf)
 	sl->dev->stats.tx_bytes += cf->can_dlc;
 }
 
-/*
- * Called by the driver when there's room for more data.  If we have
- * more packets to send, we send them here.
- */
-static void slcan_write_wakeup(struct tty_struct *tty)
+/* Write out any remaining transmit buffer. Scheduled when tty is writable */
+static void slcan_transmit(struct work_struct *work)
 {
+	struct slcan *sl = container_of(work, struct slcan, tx_work);
 	int actual;
-	struct slcan *sl = (struct slcan *) tty->disc_data;
 
+	spin_lock_bh(&sl->lock);
 	/* First make sure we're connected. */
-	if (!sl || sl->magic != SLCAN_MAGIC || !netif_running(sl->dev))
+	if (!sl->tty || sl->magic != SLCAN_MAGIC || !netif_running(sl->dev)) {
+		spin_unlock_bh(&sl->lock);
 		return;
+	}
 
-	spin_lock_bh(&sl->lock);
 	if (sl->xleft <= 0)  {
 		/* Now serial buffer is almost free & we can start
 		 * transmission of another packet */
 		sl->dev->stats.tx_packets++;
-		clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+		clear_bit(TTY_DO_WRITE_WAKEUP, &sl->tty->flags);
 		spin_unlock_bh(&sl->lock);
 		netif_wake_queue(sl->dev);
 		return;
 	}
 
-	actual = tty->ops->write(tty, sl->xhead, sl->xleft);
+	actual = sl->tty->ops->write(sl->tty, sl->xhead, sl->xleft);
 	sl->xleft -= actual;
 	sl->xhead += actual;
 	spin_unlock_bh(&sl->lock);
 }
 
+/*
+ * Called by the driver when there's room for more data.
+ * Schedule the transmit.
+ */
+static void slcan_write_wakeup(struct tty_struct *tty)
+{
+	struct slcan *sl = tty->disc_data;
+
+	schedule_work(&sl->tx_work);
+}
+
 /* Send a can_frame to a TTY queue. */
 static netdev_tx_t slc_xmit(struct sk_buff *skb, struct net_device *dev)
 {
@@ -528,6 +540,7 @@ static struct slcan *slc_alloc(dev_t line)
 	sl->magic = SLCAN_MAGIC;
 	sl->dev	= dev;
 	spin_lock_init(&sl->lock);
+	INIT_WORK(&sl->tx_work, slcan_transmit);
 	slcan_devs[i] = dev;
 
 	return sl;
@@ -626,8 +639,12 @@ static void slcan_close(struct tty_struct *tty)
 	if (!sl || sl->magic != SLCAN_MAGIC || sl->tty != tty)
 		return;
 
+	spin_lock_bh(&sl->lock);
 	tty->disc_data = NULL;
 	sl->tty = NULL;
+	spin_unlock_bh(&sl->lock);
+
+	flush_work(&sl->tx_work);
 
 	/* Flush network side */
 	unregister_netdev(sl->dev);
diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c
index 28460676b8ca..d81e7167a8b5 100644
--- a/drivers/net/ethernet/allwinner/sun4i-emac.c
+++ b/drivers/net/ethernet/allwinner/sun4i-emac.c
@@ -736,6 +736,7 @@ static int emac_open(struct net_device *dev)
 
 	ret = emac_mdio_probe(dev);
 	if (ret < 0) {
+		free_irq(dev->irq, dev);
 		netdev_err(dev, "cannot probe MDIO bus\n");
 		return ret;
 	}
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index df2792d8383d..8afa579e7c40 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -3224,7 +3224,7 @@ static int tg3_nvram_read_using_eeprom(struct tg3 *tp,
 	return 0;
 }
 
-#define NVRAM_CMD_TIMEOUT 100
+#define NVRAM_CMD_TIMEOUT 5000
 
 static int tg3_nvram_exec_cmd(struct tg3 *tp, u32 nvram_cmd)
 {
@@ -3232,7 +3232,7 @@ static int tg3_nvram_exec_cmd(struct tg3 *tp, u32 nvram_cmd)
 
 	tw32(NVRAM_CMD, nvram_cmd);
 	for (i = 0; i < NVRAM_CMD_TIMEOUT; i++) {
-		udelay(10);
+		usleep_range(10, 40);
 		if (tr32(NVRAM_CMD) & NVRAM_CMD_DONE) {
 			udelay(10);
 			break;
@@ -7854,8 +7854,8 @@ static int tg3_tso_bug(struct tg3 *tp, struct sk_buff *skb)
 		netif_wake_queue(tp->dev);
 	}
 
-	segs = skb_gso_segment(skb, tp->dev->features & ~NETIF_F_TSO);
-	if (IS_ERR(segs))
+	segs = skb_gso_segment(skb, tp->dev->features & ~(NETIF_F_TSO | NETIF_F_TSO6));
+	if (IS_ERR(segs) || !segs)
 		goto tg3_tso_bug_end;
 
 	do {
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 2f8d6b910383..a83271cf17c3 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -4057,22 +4057,19 @@ int cxgb4_unregister_uld(enum cxgb4_uld type)
 EXPORT_SYMBOL(cxgb4_unregister_uld);
 
 /* Check if netdev on which event is occured belongs to us or not. Return
- * suceess (1) if it belongs otherwise failure (0).
+ * success (true) if it belongs otherwise failure (false).
+ * Called with rcu_read_lock() held.
  */
-static int cxgb4_netdev(struct net_device *netdev)
+static bool cxgb4_netdev(const struct net_device *netdev)
 {
 	struct adapter *adap;
 	int i;
 
-	spin_lock(&adap_rcu_lock);
 	list_for_each_entry_rcu(adap, &adap_rcu_list, rcu_node)
 		for (i = 0; i < MAX_NPORTS; i++)
-			if (adap->port[i] == netdev) {
-				spin_unlock(&adap_rcu_lock);
-				return 1;
-			}
-	spin_unlock(&adap_rcu_lock);
-	return 0;
+			if (adap->port[i] == netdev)
+				return true;
+	return false;
 }
 
 static int clip_add(struct net_device *event_dev, struct inet6_ifaddr *ifa,
@@ -6396,6 +6393,7 @@ static void remove_one(struct pci_dev *pdev)
 			adapter->flags &= ~DEV_ENABLED;
 		}
 		pci_release_regions(pdev);
+		synchronize_rcu();
 		kfree(adapter);
 	} else
 		pci_release_regions(pdev);
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index bba67681aeaa..931478e7bd28 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -3962,6 +3962,7 @@ int t4_port_init(struct adapter *adap, int mbox, int pf, int vf)
 		p->lport = j;
 		p->rss_size = rss_size;
 		memcpy(adap->port[i]->dev_addr, addr, ETH_ALEN);
+		adap->port[i]->dev_port = j;
 
 		ret = ntohl(c.u.info.lstatus_to_modtype);
 		p->mdio_addr = (ret & FW_PORT_CMD_MDIOCAP) ?
diff --git a/drivers/net/ethernet/dec/tulip/timer.c b/drivers/net/ethernet/dec/tulip/timer.c
index 768379b8aee9..523d9dde50a2 100644
--- a/drivers/net/ethernet/dec/tulip/timer.c
+++ b/drivers/net/ethernet/dec/tulip/timer.c
@@ -158,7 +158,7 @@ void comet_timer(unsigned long data)
 {
 	struct net_device *dev = (struct net_device *)data;
 	struct tulip_private *tp = netdev_priv(dev);
-	int next_tick = 60*HZ;
+	int next_tick = 2*HZ;
 
 	if (tulip_debug > 1)
 		netdev_dbg(dev, "Comet link status %04x partner capability %04x\n",
diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index 2e7c5553955e..c2f5d2d3b932 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -557,9 +557,7 @@ static inline u16 be_max_qs(struct be_adapter *adapter)
 #define be_pvid_tagging_enabled(adapter)	(adapter->pvid)
 
 /* Is BE in QNQ multi-channel mode */
-#define be_is_qnq_mode(adapter)		(adapter->mc_type == FLEX10 ||  \
-					 adapter->mc_type == vNIC1 ||	\
-					 adapter->mc_type == UFP)
+#define be_is_qnq_mode(adapter)		(adapter->function_mode & QNQ_MODE)
 
 #define lancer_chip(adapter)	(adapter->pdev->device == OC_DEVICE_ID3 || \
 				 adapter->pdev->device == OC_DEVICE_ID4)
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h
index 3e0a6b243806..59b3c056f329 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.h
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.h
@@ -1091,7 +1091,7 @@ struct be_cmd_resp_modify_eq_delay {
  * based on the skew/IPL.
  */
 #define RDMA_ENABLED				0x4
-#define FLEX10_MODE				0x400
+#define QNQ_MODE				0x400
 #define VNIC_MODE				0x20000
 #define UMC_ENABLED				0x1000000
 struct be_cmd_req_query_fw_cfg {
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 6822b3d76d85..34a26e42f19d 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -3254,9 +3254,9 @@ err:
 
 static u8 be_convert_mc_type(u32 function_mode)
 {
-	if (function_mode & VNIC_MODE && function_mode & FLEX10_MODE)
+	if (function_mode & VNIC_MODE && function_mode & QNQ_MODE)
 		return vNIC1;
-	else if (function_mode & FLEX10_MODE)
+	else if (function_mode & QNQ_MODE)
 		return FLEX10;
 	else if (function_mode & VNIC_MODE)
 		return vNIC2;
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 38d9d276ab8b..77037fd377b8 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -320,6 +320,11 @@ static void *swap_buffer(void *bufaddr, int len)
 	return bufaddr;
 }
 
+static inline bool is_ipv4_pkt(struct sk_buff *skb)
+{
+	return skb->protocol == htons(ETH_P_IP) && ip_hdr(skb)->version == 4;
+}
+
 static int
 fec_enet_clear_csum(struct sk_buff *skb, struct net_device *ndev)
 {
@@ -330,7 +335,8 @@ fec_enet_clear_csum(struct sk_buff *skb, struct net_device *ndev)
 	if (unlikely(skb_cow_head(skb, 0)))
 		return -1;
 
-	ip_hdr(skb)->check = 0;
+	if (is_ipv4_pkt(skb))
+		ip_hdr(skb)->check = 0;
 	*(__sum16 *)(skb->head + skb->csum_start + skb->csum_offset) = 0;
 
 	return 0;
diff --git a/drivers/net/ethernet/marvell/skge.c b/drivers/net/ethernet/marvell/skge.c
index 7f81ae66cc89..e912b6887d40 100644
--- a/drivers/net/ethernet/marvell/skge.c
+++ b/drivers/net/ethernet/marvell/skge.c
@@ -4199,6 +4199,13 @@ static struct dmi_system_id skge_32bit_dma_boards[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "P5NSLI")
 		},
 	},
+	{
+		.ident = "FUJITSU SIEMENS A8NE-FM",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "A8NE-FM")
+		},
+	},
 	{}
 };
 
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index 5f42f6d6e4c6..82ab427290c3 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -2439,7 +2439,8 @@ slave_start:
 			    (num_vfs_argc > 1 || probe_vfs_argc > 1)) {
 				mlx4_err(dev,
 					 "Invalid syntax of num_vfs/probe_vfs with IB port - single port VFs syntax is only supported when all ports are configured as ethernet\n");
-				goto err_close;
+				err = -EINVAL;
+				goto err_master_mfunc;
 			}
 			for (i = 0; i < sizeof(nvfs)/sizeof(nvfs[0]); i++) {
 				unsigned j;
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index ff380dac6629..b988d16cd34e 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -1212,7 +1212,12 @@ static int cpsw_ndo_open(struct net_device *ndev)
 	for_each_slave(priv, cpsw_slave_open, priv);
 
 	/* Add default VLAN */
-	cpsw_add_default_vlan(priv);
+	if (!priv->data.dual_emac)
+		cpsw_add_default_vlan(priv);
+	else
+		cpsw_ale_add_vlan(priv->ale, priv->data.default_vlan,
+				  ALE_ALL_PORTS << priv->host_port,
+				  ALE_ALL_PORTS << priv->host_port, 0, 0);
 
 	if (!cpsw_common_res_usage_state(priv)) {
 		/* setup tx dma to fixed prio and zero offset */
diff --git a/drivers/net/ethernet/tile/tilegx.c b/drivers/net/ethernet/tile/tilegx.c
index 14389f841d43..4c70360967c2 100644
--- a/drivers/net/ethernet/tile/tilegx.c
+++ b/drivers/net/ethernet/tile/tilegx.c
@@ -2191,7 +2191,6 @@ static void tile_net_setup(struct net_device *dev)
 static void tile_net_dev_init(const char *name, const uint8_t *mac)
 {
 	int ret;
-	int i;
 	struct net_device *dev;
 	struct tile_net_priv *priv;
 
diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c
index c041f63a6d30..4ed38eaecea8 100644
--- a/drivers/net/hyperv/netvsc.c
+++ b/drivers/net/hyperv/netvsc.c
@@ -189,7 +189,7 @@ static int netvsc_destroy_buf(struct netvsc_device *net_device)
 				   "unable to teardown send buffer's gpadl\n");
 			return ret;
 		}
-		net_device->recv_buf_gpadl_handle = 0;
+		net_device->send_buf_gpadl_handle = 0;
 	}
 	if (net_device->send_buf) {
 		/* Free up the receive buffer */
diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 4517b149ed07..50899416f668 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -1137,6 +1137,8 @@ static int at86rf230_probe(struct spi_device *spi)
 	dev->flags = IEEE802154_HW_OMIT_CKSUM | IEEE802154_HW_AACK;
 
 	irq_type = irq_get_trigger_type(spi->irq);
+	if (!irq_type)
+		irq_type = IRQF_TRIGGER_RISING;
 	if (irq_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)) {
 		irq_worker = at86rf230_irqwork;
 		irq_handler = at86rf230_isr;
@@ -1168,7 +1170,8 @@ static int at86rf230_probe(struct spi_device *spi)
 	if (rc)
 		goto err_hw_init;
 
-	rc = devm_request_irq(&spi->dev, spi->irq, irq_handler, IRQF_SHARED,
+	rc = devm_request_irq(&spi->dev, spi->irq, irq_handler,
+			      IRQF_SHARED | irq_type,
 			      dev_name(&spi->dev), lp);
 	if (rc)
 		goto err_hw_init;
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 6c622aedbae1..fdc1b418fa6a 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -16,9 +16,13 @@
 #include <linux/string.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
 
 #define AT803X_INTR_ENABLE			0x12
 #define AT803X_INTR_STATUS			0x13
+#define AT803X_SMART_SPEED			0x14
+#define AT803X_LED_CONTROL			0x18
 #define AT803X_WOL_ENABLE			0x01
 #define AT803X_DEVICE_ADDR			0x03
 #define AT803X_LOC_MAC_ADDR_0_15_OFFSET		0x804C
@@ -35,10 +39,52 @@
 #define AT803X_DEBUG_SYSTEM_MODE_CTRL		0x05
 #define AT803X_DEBUG_RGMII_TX_CLK_DLY		BIT(8)
 
+#define ATH8030_PHY_ID 0x004dd076
+#define ATH8031_PHY_ID 0x004dd074
+#define ATH8035_PHY_ID 0x004dd072
+
 MODULE_DESCRIPTION("Atheros 803x PHY driver");
 MODULE_AUTHOR("Matus Ujhelyi");
 MODULE_LICENSE("GPL");
 
+struct at803x_priv {
+	bool phy_reset:1;
+	struct gpio_desc *gpiod_reset;
+};
+
+struct at803x_context {
+	u16 bmcr;
+	u16 advertise;
+	u16 control1000;
+	u16 int_enable;
+	u16 smart_speed;
+	u16 led_control;
+};
+
+/* save relevant PHY registers to private copy */
+static void at803x_context_save(struct phy_device *phydev,
+				struct at803x_context *context)
+{
+	context->bmcr = phy_read(phydev, MII_BMCR);
+	context->advertise = phy_read(phydev, MII_ADVERTISE);
+	context->control1000 = phy_read(phydev, MII_CTRL1000);
+	context->int_enable = phy_read(phydev, AT803X_INTR_ENABLE);
+	context->smart_speed = phy_read(phydev, AT803X_SMART_SPEED);
+	context->led_control = phy_read(phydev, AT803X_LED_CONTROL);
+}
+
+/* restore relevant PHY registers from private copy */
+static void at803x_context_restore(struct phy_device *phydev,
+				   const struct at803x_context *context)
+{
+	phy_write(phydev, MII_BMCR, context->bmcr);
+	phy_write(phydev, MII_ADVERTISE, context->advertise);
+	phy_write(phydev, MII_CTRL1000, context->control1000);
+	phy_write(phydev, AT803X_INTR_ENABLE, context->int_enable);
+	phy_write(phydev, AT803X_SMART_SPEED, context->smart_speed);
+	phy_write(phydev, AT803X_LED_CONTROL, context->led_control);
+}
+
 static int at803x_set_wol(struct phy_device *phydev,
 			  struct ethtool_wolinfo *wol)
 {
@@ -142,6 +188,26 @@ static int at803x_resume(struct phy_device *phydev)
 	return 0;
 }
 
+static int at803x_probe(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->dev;
+	struct at803x_priv *priv;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->gpiod_reset = devm_gpiod_get(dev, "reset");
+	if (IS_ERR(priv->gpiod_reset))
+		priv->gpiod_reset = NULL;
+	else
+		gpiod_direction_output(priv->gpiod_reset, 1);
+
+	phydev->priv = priv;
+
+	return 0;
+}
+
 static int at803x_config_init(struct phy_device *phydev)
 {
 	int ret;
@@ -189,58 +255,99 @@ static int at803x_config_intr(struct phy_device *phydev)
 	return err;
 }
 
+static void at803x_link_change_notify(struct phy_device *phydev)
+{
+	struct at803x_priv *priv = phydev->priv;
+
+	/*
+	 * Conduct a hardware reset for AT8030 every time a link loss is
+	 * signalled. This is necessary to circumvent a hardware bug that
+	 * occurs when the cable is unplugged while TX packets are pending
+	 * in the FIFO. In such cases, the FIFO enters an error mode it
+	 * cannot recover from by software.
+	 */
+	if (phydev->drv->phy_id == ATH8030_PHY_ID) {
+		if (phydev->state == PHY_NOLINK) {
+			if (priv->gpiod_reset && !priv->phy_reset) {
+				struct at803x_context context;
+
+				at803x_context_save(phydev, &context);
+
+				gpiod_set_value(priv->gpiod_reset, 0);
+				msleep(1);
+				gpiod_set_value(priv->gpiod_reset, 1);
+				msleep(1);
+
+				at803x_context_restore(phydev, &context);
+
+				dev_dbg(&phydev->dev, "%s(): phy was reset\n",
+					__func__);
+				priv->phy_reset = true;
+			}
+		} else {
+			priv->phy_reset = false;
+		}
+	}
+}
+
 static struct phy_driver at803x_driver[] = {
 {
 	/* ATHEROS 8035 */
-	.phy_id		= 0x004dd072,
-	.name		= "Atheros 8035 ethernet",
-	.phy_id_mask	= 0xffffffef,
-	.config_init	= at803x_config_init,
-	.set_wol	= at803x_set_wol,
-	.get_wol	= at803x_get_wol,
-	.suspend	= at803x_suspend,
-	.resume		= at803x_resume,
-	.features	= PHY_GBIT_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
-	.config_aneg	= genphy_config_aneg,
-	.read_status	= genphy_read_status,
-	.driver		= {
+	.phy_id			= ATH8035_PHY_ID,
+	.name			= "Atheros 8035 ethernet",
+	.phy_id_mask		= 0xffffffef,
+	.probe			= at803x_probe,
+	.config_init		= at803x_config_init,
+	.link_change_notify	= at803x_link_change_notify,
+	.set_wol		= at803x_set_wol,
+	.get_wol		= at803x_get_wol,
+	.suspend		= at803x_suspend,
+	.resume			= at803x_resume,
+	.features		= PHY_GBIT_FEATURES,
+	.flags			= PHY_HAS_INTERRUPT,
+	.config_aneg		= genphy_config_aneg,
+	.read_status		= genphy_read_status,
+	.driver			= {
 		.owner = THIS_MODULE,
 	},
 }, {
 	/* ATHEROS 8030 */
-	.phy_id		= 0x004dd076,
-	.name		= "Atheros 8030 ethernet",
-	.phy_id_mask	= 0xffffffef,
-	.config_init	= at803x_config_init,
-	.set_wol	= at803x_set_wol,
-	.get_wol	= at803x_get_wol,
-	.suspend	= at803x_suspend,
-	.resume		= at803x_resume,
-	.features	= PHY_GBIT_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
-	.config_aneg	= genphy_config_aneg,
-	.read_status	= genphy_read_status,
-	.driver		= {
+	.phy_id			= ATH8030_PHY_ID,
+	.name			= "Atheros 8030 ethernet",
+	.phy_id_mask		= 0xffffffef,
+	.probe			= at803x_probe,
+	.config_init		= at803x_config_init,
+	.link_change_notify	= at803x_link_change_notify,
+	.set_wol		= at803x_set_wol,
+	.get_wol		= at803x_get_wol,
+	.suspend		= at803x_suspend,
+	.resume			= at803x_resume,
+	.features		= PHY_GBIT_FEATURES,
+	.flags			= PHY_HAS_INTERRUPT,
+	.config_aneg		= genphy_config_aneg,
+	.read_status		= genphy_read_status,
+	.driver			= {
 		.owner = THIS_MODULE,
 	},
 }, {
 	/* ATHEROS 8031 */
-	.phy_id		= 0x004dd074,
-	.name		= "Atheros 8031 ethernet",
-	.phy_id_mask	= 0xffffffef,
-	.config_init	= at803x_config_init,
-	.set_wol	= at803x_set_wol,
-	.get_wol	= at803x_get_wol,
-	.suspend	= at803x_suspend,
-	.resume		= at803x_resume,
-	.features	= PHY_GBIT_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
-	.config_aneg	= genphy_config_aneg,
-	.read_status	= genphy_read_status,
-	.ack_interrupt  = &at803x_ack_interrupt,
-	.config_intr    = &at803x_config_intr,
-	.driver		= {
+	.phy_id			= ATH8031_PHY_ID,
+	.name			= "Atheros 8031 ethernet",
+	.phy_id_mask		= 0xffffffef,
+	.probe			= at803x_probe,
+	.config_init		= at803x_config_init,
+	.link_change_notify	= at803x_link_change_notify,
+	.set_wol		= at803x_set_wol,
+	.get_wol		= at803x_get_wol,
+	.suspend		= at803x_suspend,
+	.resume			= at803x_resume,
+	.features		= PHY_GBIT_FEATURES,
+	.flags			= PHY_HAS_INTERRUPT,
+	.config_aneg		= genphy_config_aneg,
+	.read_status		= genphy_read_status,
+	.ack_interrupt		= &at803x_ack_interrupt,
+	.config_intr		= &at803x_config_intr,
+	.driver			= {
 		.owner = THIS_MODULE,
 	},
 } };
@@ -260,9 +367,9 @@ module_init(atheros_init);
 module_exit(atheros_exit);
 
 static struct mdio_device_id __maybe_unused atheros_tbl[] = {
-	{ 0x004dd076, 0xffffffef },
-	{ 0x004dd074, 0xffffffef },
-	{ 0x004dd072, 0xffffffef },
+	{ ATH8030_PHY_ID, 0xffffffef },
+	{ ATH8031_PHY_ID, 0xffffffef },
+	{ ATH8035_PHY_ID, 0xffffffef },
 	{ }
 };
 
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 3bc079a67a3d..f7c61812ea4a 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -720,6 +720,9 @@ void phy_state_machine(struct work_struct *work)
 
 	mutex_lock(&phydev->lock);
 
+	if (phydev->drv->link_change_notify)
+		phydev->drv->link_change_notify(phydev);
+
 	switch (phydev->state) {
 	case PHY_DOWN:
 	case PHY_STARTING:
diff --git a/drivers/net/slip/slip.c b/drivers/net/slip/slip.c
index ad4a94e9ff57..87526443841f 100644
--- a/drivers/net/slip/slip.c
+++ b/drivers/net/slip/slip.c
@@ -83,6 +83,7 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/workqueue.h>
 #include "slip.h"
 #ifdef CONFIG_INET
 #include <linux/ip.h>
@@ -416,36 +417,46 @@ static void sl_encaps(struct slip *sl, unsigned char *icp, int len)
 #endif
 }
 
-/*
- * Called by the driver when there's room for more data.  If we have
- * more packets to send, we send them here.
- */
-static void slip_write_wakeup(struct tty_struct *tty)
+/* Write out any remaining transmit buffer. Scheduled when tty is writable */
+static void slip_transmit(struct work_struct *work)
 {
+	struct slip *sl = container_of(work, struct slip, tx_work);
 	int actual;
-	struct slip *sl = tty->disc_data;
 
+	spin_lock_bh(&sl->lock);
 	/* First make sure we're connected. */
-	if (!sl || sl->magic != SLIP_MAGIC || !netif_running(sl->dev))
+	if (!sl->tty || sl->magic != SLIP_MAGIC || !netif_running(sl->dev)) {
+		spin_unlock_bh(&sl->lock);
 		return;
+	}
 
-	spin_lock_bh(&sl->lock);
 	if (sl->xleft <= 0)  {
 		/* Now serial buffer is almost free & we can start
 		 * transmission of another packet */
 		sl->dev->stats.tx_packets++;
-		clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+		clear_bit(TTY_DO_WRITE_WAKEUP, &sl->tty->flags);
 		spin_unlock_bh(&sl->lock);
 		sl_unlock(sl);
 		return;
 	}
 
-	actual = tty->ops->write(tty, sl->xhead, sl->xleft);
+	actual = sl->tty->ops->write(sl->tty, sl->xhead, sl->xleft);
 	sl->xleft -= actual;
 	sl->xhead += actual;
 	spin_unlock_bh(&sl->lock);
 }
 
+/*
+ * Called by the driver when there's room for more data.
+ * Schedule the transmit.
+ */
+static void slip_write_wakeup(struct tty_struct *tty)
+{
+	struct slip *sl = tty->disc_data;
+
+	schedule_work(&sl->tx_work);
+}
+
 static void sl_tx_timeout(struct net_device *dev)
 {
 	struct slip *sl = netdev_priv(dev);
@@ -749,6 +760,7 @@ static struct slip *sl_alloc(dev_t line)
 	sl->magic       = SLIP_MAGIC;
 	sl->dev	      	= dev;
 	spin_lock_init(&sl->lock);
+	INIT_WORK(&sl->tx_work, slip_transmit);
 	sl->mode        = SL_MODE_DEFAULT;
 #ifdef CONFIG_SLIP_SMART
 	/* initialize timer_list struct */
@@ -872,8 +884,12 @@ static void slip_close(struct tty_struct *tty)
 	if (!sl || sl->magic != SLIP_MAGIC || sl->tty != tty)
 		return;
 
+	spin_lock_bh(&sl->lock);
 	tty->disc_data = NULL;
 	sl->tty = NULL;
+	spin_unlock_bh(&sl->lock);
+
+	flush_work(&sl->tx_work);
 
 	/* VSV = very important to remove timers */
 #ifdef CONFIG_SLIP_SMART
diff --git a/drivers/net/slip/slip.h b/drivers/net/slip/slip.h
index 67673cf1266b..cf32aadf508f 100644
--- a/drivers/net/slip/slip.h
+++ b/drivers/net/slip/slip.h
@@ -53,6 +53,7 @@ struct slip {
   struct tty_struct	*tty;		/* ptr to TTY structure		*/
   struct net_device	*dev;		/* easy for intr handling	*/
   spinlock_t		lock;
+  struct work_struct	tx_work;	/* Flushes transmit buffer	*/
 
 #ifdef SL_INCLUDE_CSLIP
   struct slcompress	*slcomp;	/* for header compression 	*/
diff --git a/drivers/net/usb/huawei_cdc_ncm.c b/drivers/net/usb/huawei_cdc_ncm.c
index f9822bc75425..5d95a13dbe2a 100644
--- a/drivers/net/usb/huawei_cdc_ncm.c
+++ b/drivers/net/usb/huawei_cdc_ncm.c
@@ -84,12 +84,13 @@ static int huawei_cdc_ncm_bind(struct usbnet *usbnet_dev,
 	ctx = drvstate->ctx;
 
 	if (usbnet_dev->status)
-		/* CDC-WMC r1.1 requires wMaxCommand to be "at least 256
-		 * decimal (0x100)"
+		/* The wMaxCommand buffer must be big enough to hold
+		 * any message from the modem. Experience has shown
+		 * that some replies are more than 256 bytes long
 		 */
 		subdriver = usb_cdc_wdm_register(ctx->control,
 						 &usbnet_dev->status->desc,
-						 256, /* wMaxCommand */
+						 1024, /* wMaxCommand */
 						 huawei_cdc_ncm_wdm_manage_power);
 	if (IS_ERR(subdriver)) {
 		ret = PTR_ERR(subdriver);
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index 97394345e5dd..b76f7dcde0db 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -2589,8 +2589,8 @@ vmxnet3_open(struct net_device *netdev)
 	for (i = 0; i < adapter->num_tx_queues; i++)
 		spin_lock_init(&adapter->tx_queue[i].tx_lock);
 
-	err = vmxnet3_create_queues(adapter, VMXNET3_DEF_TX_RING_SIZE,
-				    VMXNET3_DEF_RX_RING_SIZE,
+	err = vmxnet3_create_queues(adapter, adapter->tx_ring_size,
+				    adapter->rx_ring_size,
 				    VMXNET3_DEF_RX_RING_SIZE);
 	if (err)
 		goto queue_err;
@@ -2968,6 +2968,9 @@ vmxnet3_probe_device(struct pci_dev *pdev,
 	adapter->netdev = netdev;
 	adapter->pdev = pdev;
 
+	adapter->tx_ring_size = VMXNET3_DEF_TX_RING_SIZE;
+	adapter->rx_ring_size = VMXNET3_DEF_RX_RING_SIZE;
+
 	spin_lock_init(&adapter->cmd_lock);
 	adapter->adapter_pa = dma_map_single(&adapter->pdev->dev, adapter,
 					     sizeof(struct vmxnet3_adapter),
diff --git a/drivers/net/vmxnet3/vmxnet3_ethtool.c b/drivers/net/vmxnet3/vmxnet3_ethtool.c
index 40c1c7b0d9e0..b725fd9e7803 100644
--- a/drivers/net/vmxnet3/vmxnet3_ethtool.c
+++ b/drivers/net/vmxnet3/vmxnet3_ethtool.c
@@ -449,8 +449,8 @@ vmxnet3_get_ringparam(struct net_device *netdev,
 	param->rx_mini_max_pending = 0;
 	param->rx_jumbo_max_pending = 0;
 
-	param->rx_pending = adapter->rx_queue[0].rx_ring[0].size;
-	param->tx_pending = adapter->tx_queue[0].tx_ring.size;
+	param->rx_pending = adapter->rx_ring_size;
+	param->tx_pending = adapter->tx_ring_size;
 	param->rx_mini_pending = 0;
 	param->rx_jumbo_pending = 0;
 }
@@ -529,9 +529,11 @@ vmxnet3_set_ringparam(struct net_device *netdev,
 			 * size */
 			netdev_err(netdev, "failed to apply new sizes, "
 				   "try the default ones\n");
+			new_rx_ring_size = VMXNET3_DEF_RX_RING_SIZE;
+			new_tx_ring_size = VMXNET3_DEF_TX_RING_SIZE;
 			err = vmxnet3_create_queues(adapter,
-						    VMXNET3_DEF_TX_RING_SIZE,
-						    VMXNET3_DEF_RX_RING_SIZE,
+						    new_tx_ring_size,
+						    new_rx_ring_size,
 						    VMXNET3_DEF_RX_RING_SIZE);
 			if (err) {
 				netdev_err(netdev, "failed to create queues "
@@ -545,6 +547,8 @@ vmxnet3_set_ringparam(struct net_device *netdev,
 			netdev_err(netdev, "failed to re-activate, error %d."
 				   " Closing it\n", err);
 	}
+	adapter->tx_ring_size = new_tx_ring_size;
+	adapter->rx_ring_size = new_rx_ring_size;
 
 out:
 	clear_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state);
diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h
index 190569d02450..29ee77f2c97f 100644
--- a/drivers/net/vmxnet3/vmxnet3_int.h
+++ b/drivers/net/vmxnet3/vmxnet3_int.h
@@ -349,6 +349,11 @@ struct vmxnet3_adapter {
 	u32     link_speed; /* in mbps */
 
 	u64     tx_timeout_count;
+
+	/* Ring sizes */
+	u32 tx_ring_size;
+	u32 rx_ring_size;
+
 	struct work_struct work;
 
 	unsigned long  state;    /* VMXNET3_STATE_BIT_xxx */
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index e3f67b8d3f80..40fd9b7b1426 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -36,7 +36,7 @@ config B43_SSB
 choice
 	prompt "Supported bus types"
 	depends on B43
-	default B43_BCMA_AND_SSB
+	default B43_BUSES_BCMA_AND_SSB
 
 config B43_BUSES_BCMA_AND_SSB
 	bool "BCMA and SSB"
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 32538ac5f7e4..0d6a0bb1f876 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -5221,6 +5221,7 @@ static int b43_wireless_core_attach(struct b43_wldev *dev)
 	/* We don't support 5 GHz on some PHYs yet */
 	switch (dev->phy.type) {
 	case B43_PHYTYPE_A:
+	case B43_PHYTYPE_G:
 	case B43_PHYTYPE_N:
 	case B43_PHYTYPE_LP:
 	case B43_PHYTYPE_HT:
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index 4f38f19b8e3d..6e6ef3fc2247 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -811,9 +811,13 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr)
 		break;
 	case B43_PHYTYPE_G:
 		status.band = IEEE80211_BAND_2GHZ;
-		/* chanid is the radio channel cookie value as used
-		 * to tune the radio. */
-		status.freq = chanid + 2400;
+		/* Somewhere between 478.104 and 508.1084 firmware for G-PHY
+		 * has been modified to be compatible with N-PHY and others.
+		 */
+		if (dev->fw.rev >= 508)
+			status.freq = ieee80211_channel_to_frequency(chanid, status.band);
+		else
+			status.freq = chanid + 2400;
 		break;
 	case B43_PHYTYPE_N:
 	case B43_PHYTYPE_LP:
diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c
index 574d4b597468..2cc9b6fca490 100644
--- a/drivers/net/wireless/mwifiex/pcie.c
+++ b/drivers/net/wireless/mwifiex/pcie.c
@@ -50,7 +50,7 @@ mwifiex_map_pci_memory(struct mwifiex_adapter *adapter, struct sk_buff *skb,
 		return -1;
 	}
 	mapping.len = size;
-	memcpy(skb->cb, &mapping, sizeof(mapping));
+	mwifiex_store_mapping(skb, &mapping);
 	return 0;
 }
 
@@ -60,7 +60,7 @@ static void mwifiex_unmap_pci_memory(struct mwifiex_adapter *adapter,
 	struct pcie_service_card *card = adapter->card;
 	struct mwifiex_dma_mapping mapping;
 
-	MWIFIEX_SKB_PACB(skb, &mapping);
+	mwifiex_get_mapping(skb, &mapping);
 	pci_unmap_single(card->dev, mapping.addr, mapping.len, flags);
 }
 
diff --git a/drivers/net/wireless/mwifiex/util.h b/drivers/net/wireless/mwifiex/util.h
index ddae57021397..caadb3737b9e 100644
--- a/drivers/net/wireless/mwifiex/util.h
+++ b/drivers/net/wireless/mwifiex/util.h
@@ -20,32 +20,55 @@
 #ifndef _MWIFIEX_UTIL_H_
 #define _MWIFIEX_UTIL_H_
 
+struct mwifiex_dma_mapping {
+	dma_addr_t addr;
+	size_t len;
+};
+
+struct mwifiex_cb {
+	struct mwifiex_dma_mapping dma_mapping;
+	union {
+		struct mwifiex_rxinfo rx_info;
+		struct mwifiex_txinfo tx_info;
+	};
+};
+
 static inline struct mwifiex_rxinfo *MWIFIEX_SKB_RXCB(struct sk_buff *skb)
 {
-	return (struct mwifiex_rxinfo *)(skb->cb + sizeof(dma_addr_t));
+	struct mwifiex_cb *cb = (struct mwifiex_cb *)skb->cb;
+
+	BUILD_BUG_ON(sizeof(struct mwifiex_cb) > sizeof(skb->cb));
+	return &cb->rx_info;
 }
 
 static inline struct mwifiex_txinfo *MWIFIEX_SKB_TXCB(struct sk_buff *skb)
 {
-	return (struct mwifiex_txinfo *)(skb->cb + sizeof(dma_addr_t));
+	struct mwifiex_cb *cb = (struct mwifiex_cb *)skb->cb;
+
+	return &cb->tx_info;
 }
 
-struct mwifiex_dma_mapping {
-	dma_addr_t addr;
-	size_t len;
-};
+static inline void mwifiex_store_mapping(struct sk_buff *skb,
+					 struct mwifiex_dma_mapping *mapping)
+{
+	struct mwifiex_cb *cb = (struct mwifiex_cb *)skb->cb;
+
+	memcpy(&cb->dma_mapping, mapping, sizeof(*mapping));
+}
 
-static inline void MWIFIEX_SKB_PACB(struct sk_buff *skb,
-					struct mwifiex_dma_mapping *mapping)
+static inline void mwifiex_get_mapping(struct sk_buff *skb,
+				       struct mwifiex_dma_mapping *mapping)
 {
-	memcpy(mapping, skb->cb, sizeof(*mapping));
+	struct mwifiex_cb *cb = (struct mwifiex_cb *)skb->cb;
+
+	memcpy(mapping, &cb->dma_mapping, sizeof(*mapping));
 }
 
 static inline dma_addr_t MWIFIEX_SKB_DMA_ADDR(struct sk_buff *skb)
 {
 	struct mwifiex_dma_mapping mapping;
 
-	MWIFIEX_SKB_PACB(skb, &mapping);
+	mwifiex_get_mapping(skb, &mapping);
 
 	return mapping.addr;
 }
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 2f1cd929c6f6..a511cccc9f01 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1681,8 +1681,13 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Detect if this device has an hardware controlled radio.
 	 */
-	if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
+	if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO)) {
 		__set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags);
+		/*
+		 * On this device RFKILL initialized during probe does not work.
+		 */
+		__set_bit(REQUIRE_DELAYED_RFKILL, &rt2x00dev->cap_flags);
+	}
 
 	/*
 	 * Check if the BBP tuning should be enabled.
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index a49c3d73ea2c..e11dab2216c6 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -229,6 +229,27 @@ static enum hrtimer_restart rt2800usb_tx_sta_fifo_timeout(struct hrtimer *timer)
 /*
  * Firmware functions
  */
+static int rt2800usb_autorun_detect(struct rt2x00_dev *rt2x00dev)
+{
+	__le32 reg;
+	u32 fw_mode;
+
+	/* cannot use rt2x00usb_register_read here as it uses different
+	 * mode (MULTI_READ vs. DEVICE_MODE) and does not pass the
+	 * magic value USB_MODE_AUTORUN (0x11) to the device, thus the
+	 * returned value would be invalid.
+	 */
+	rt2x00usb_vendor_request(rt2x00dev, USB_DEVICE_MODE,
+				 USB_VENDOR_REQUEST_IN, 0, USB_MODE_AUTORUN,
+				 &reg, sizeof(reg), REGISTER_TIMEOUT_FIRMWARE);
+	fw_mode = le32_to_cpu(reg);
+
+	if ((fw_mode & 0x00000003) == 2)
+		return 1;
+
+	return 0;
+}
+
 static char *rt2800usb_get_firmware_name(struct rt2x00_dev *rt2x00dev)
 {
 	return FIRMWARE_RT2870;
@@ -257,8 +278,13 @@ static int rt2800usb_write_firmware(struct rt2x00_dev *rt2x00dev,
 	/*
 	 * Write firmware to device.
 	 */
-	rt2x00usb_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
-				      data + offset, length);
+	if (rt2800usb_autorun_detect(rt2x00dev)) {
+		rt2x00_info(rt2x00dev,
+			    "Firmware loading not required - NIC in AutoRun mode\n");
+	} else {
+		rt2x00usb_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
+					      data + offset, length);
+	}
 
 	rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
 	rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
@@ -735,11 +761,18 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry,
 /*
  * Device probe functions.
  */
+static int rt2800usb_efuse_detect(struct rt2x00_dev *rt2x00dev)
+{
+	if (rt2800usb_autorun_detect(rt2x00dev))
+		return 1;
+	return rt2800_efuse_detect(rt2x00dev);
+}
+
 static int rt2800usb_read_eeprom(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
 
-	if (rt2800_efuse_detect(rt2x00dev))
+	if (rt2800usb_efuse_detect(rt2x00dev))
 		retval = rt2800_read_eeprom_efuse(rt2x00dev);
 	else
 		retval = rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom,
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 010b76505243..d13f25cd70d5 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -693,6 +693,7 @@ enum rt2x00_capability_flags {
 	REQUIRE_SW_SEQNO,
 	REQUIRE_HT_TX_DESC,
 	REQUIRE_PS_AUTOWAKE,
+	REQUIRE_DELAYED_RFKILL,
 
 	/*
 	 * Capabilities
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 2bde6729f5e6..4fa43a2eeb73 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -1126,9 +1126,10 @@ static void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev)
 		return;
 
 	/*
-	 * Unregister extra components.
+	 * Stop rfkill polling.
 	 */
-	rt2x00rfkill_unregister(rt2x00dev);
+	if (test_bit(REQUIRE_DELAYED_RFKILL, &rt2x00dev->cap_flags))
+		rt2x00rfkill_unregister(rt2x00dev);
 
 	/*
 	 * Allow the HW to uninitialize.
@@ -1166,6 +1167,12 @@ static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev)
 
 	set_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags);
 
+	/*
+	 * Start rfkill polling.
+	 */
+	if (test_bit(REQUIRE_DELAYED_RFKILL, &rt2x00dev->cap_flags))
+		rt2x00rfkill_register(rt2x00dev);
+
 	return 0;
 }
 
@@ -1375,7 +1382,12 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
 	rt2x00link_register(rt2x00dev);
 	rt2x00leds_register(rt2x00dev);
 	rt2x00debug_register(rt2x00dev);
-	rt2x00rfkill_register(rt2x00dev);
+
+	/*
+	 * Start rfkill polling.
+	 */
+	if (!test_bit(REQUIRE_DELAYED_RFKILL, &rt2x00dev->cap_flags))
+		rt2x00rfkill_register(rt2x00dev);
 
 	return 0;
 
@@ -1391,6 +1403,12 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
 	clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
 
 	/*
+	 * Stop rfkill polling.
+	 */
+	if (!test_bit(REQUIRE_DELAYED_RFKILL, &rt2x00dev->cap_flags))
+		rt2x00rfkill_unregister(rt2x00dev);
+
+	/*
 	 * Disable radio.
 	 */
 	rt2x00lib_disable_radio(rt2x00dev);
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index 212ac4842c16..004dff9b962d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -487,6 +487,8 @@ int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	crypto.cipher = rt2x00crypto_key_to_cipher(key);
 	if (crypto.cipher == CIPHER_NONE)
 		return -EOPNOTSUPP;
+	if (crypto.cipher == CIPHER_TKIP && rt2x00_is_usb(rt2x00dev))
+		return -EOPNOTSUPP;
 
 	crypto.cmd = cmd;
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h
index e7bcf62347d5..831b65f93feb 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.h
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -93,6 +93,7 @@ enum rt2x00usb_mode_offset {
 	USB_MODE_SLEEP = 7,	/* RT73USB */
 	USB_MODE_FIRMWARE = 8,	/* RT73USB */
 	USB_MODE_WAKEUP = 9,	/* RT73USB */
+	USB_MODE_AUTORUN = 17, /* RT2800USB */
 };
 
 /**
diff --git a/drivers/net/xen-netback/common.h b/drivers/net/xen-netback/common.h
index 4dd7c4a1923b..2532ce85d718 100644
--- a/drivers/net/xen-netback/common.h
+++ b/drivers/net/xen-netback/common.h
@@ -222,6 +222,7 @@ struct xenvif {
 
 	/* Queues */
 	struct xenvif_queue *queues;
+	unsigned int num_queues; /* active queues, resource allocated */
 
 	/* Miscellaneous private stuff. */
 	struct net_device *dev;
diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c
index 852da34b8961..9e97c7ca0ddd 100644
--- a/drivers/net/xen-netback/interface.c
+++ b/drivers/net/xen-netback/interface.c
@@ -137,32 +137,11 @@ static void xenvif_wake_queue_callback(unsigned long data)
 	}
 }
 
-static u16 xenvif_select_queue(struct net_device *dev, struct sk_buff *skb,
-			       void *accel_priv, select_queue_fallback_t fallback)
-{
-	unsigned int num_queues = dev->real_num_tx_queues;
-	u32 hash;
-	u16 queue_index;
-
-	/* First, check if there is only one queue to optimise the
-	 * single-queue or old frontend scenario.
-	 */
-	if (num_queues == 1) {
-		queue_index = 0;
-	} else {
-		/* Use skb_get_hash to obtain an L4 hash if available */
-		hash = skb_get_hash(skb);
-		queue_index = hash % num_queues;
-	}
-
-	return queue_index;
-}
-
 static int xenvif_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct xenvif *vif = netdev_priv(dev);
 	struct xenvif_queue *queue = NULL;
-	unsigned int num_queues = dev->real_num_tx_queues;
+	unsigned int num_queues = vif->num_queues;
 	u16 index;
 	int min_slots_needed;
 
@@ -225,7 +204,7 @@ static struct net_device_stats *xenvif_get_stats(struct net_device *dev)
 {
 	struct xenvif *vif = netdev_priv(dev);
 	struct xenvif_queue *queue = NULL;
-	unsigned int num_queues = dev->real_num_tx_queues;
+	unsigned int num_queues = vif->num_queues;
 	unsigned long rx_bytes = 0;
 	unsigned long rx_packets = 0;
 	unsigned long tx_bytes = 0;
@@ -256,7 +235,7 @@ out:
 static void xenvif_up(struct xenvif *vif)
 {
 	struct xenvif_queue *queue = NULL;
-	unsigned int num_queues = vif->dev->real_num_tx_queues;
+	unsigned int num_queues = vif->num_queues;
 	unsigned int queue_index;
 
 	for (queue_index = 0; queue_index < num_queues; ++queue_index) {
@@ -272,7 +251,7 @@ static void xenvif_up(struct xenvif *vif)
 static void xenvif_down(struct xenvif *vif)
 {
 	struct xenvif_queue *queue = NULL;
-	unsigned int num_queues = vif->dev->real_num_tx_queues;
+	unsigned int num_queues = vif->num_queues;
 	unsigned int queue_index;
 
 	for (queue_index = 0; queue_index < num_queues; ++queue_index) {
@@ -379,7 +358,7 @@ static void xenvif_get_ethtool_stats(struct net_device *dev,
 				     struct ethtool_stats *stats, u64 * data)
 {
 	struct xenvif *vif = netdev_priv(dev);
-	unsigned int num_queues = dev->real_num_tx_queues;
+	unsigned int num_queues = vif->num_queues;
 	int i;
 	unsigned int queue_index;
 	struct xenvif_stats *vif_stats;
@@ -424,7 +403,6 @@ static const struct net_device_ops xenvif_netdev_ops = {
 	.ndo_fix_features = xenvif_fix_features,
 	.ndo_set_mac_address = eth_mac_addr,
 	.ndo_validate_addr   = eth_validate_addr,
-	.ndo_select_queue = xenvif_select_queue,
 };
 
 struct xenvif *xenvif_alloc(struct device *parent, domid_t domid,
@@ -438,7 +416,7 @@ struct xenvif *xenvif_alloc(struct device *parent, domid_t domid,
 	snprintf(name, IFNAMSIZ - 1, "vif%u.%u", domid, handle);
 	/* Allocate a netdev with the max. supported number of queues.
 	 * When the guest selects the desired number, it will be updated
-	 * via netif_set_real_num_tx_queues().
+	 * via netif_set_real_num_*_queues().
 	 */
 	dev = alloc_netdev_mq(sizeof(struct xenvif), name, ether_setup,
 			      xenvif_max_queues);
@@ -458,11 +436,9 @@ struct xenvif *xenvif_alloc(struct device *parent, domid_t domid,
 	vif->dev = dev;
 	vif->disabled = false;
 
-	/* Start out with no queues. The call below does not require
-	 * rtnl_lock() as it happens before register_netdev().
-	 */
+	/* Start out with no queues. */
 	vif->queues = NULL;
-	netif_set_real_num_tx_queues(dev, 0);
+	vif->num_queues = 0;
 
 	dev->netdev_ops	= &xenvif_netdev_ops;
 	dev->hw_features = NETIF_F_SG |
@@ -677,7 +653,7 @@ static void xenvif_wait_unmap_timeout(struct xenvif_queue *queue,
 void xenvif_disconnect(struct xenvif *vif)
 {
 	struct xenvif_queue *queue = NULL;
-	unsigned int num_queues = vif->dev->real_num_tx_queues;
+	unsigned int num_queues = vif->num_queues;
 	unsigned int queue_index;
 
 	if (netif_carrier_ok(vif->dev))
@@ -724,7 +700,7 @@ void xenvif_deinit_queue(struct xenvif_queue *queue)
 void xenvif_free(struct xenvif *vif)
 {
 	struct xenvif_queue *queue = NULL;
-	unsigned int num_queues = vif->dev->real_num_tx_queues;
+	unsigned int num_queues = vif->num_queues;
 	unsigned int queue_index;
 	/* Here we want to avoid timeout messages if an skb can be legitimately
 	 * stuck somewhere else. Realistically this could be an another vif's
@@ -748,12 +724,9 @@ void xenvif_free(struct xenvif *vif)
 		xenvif_deinit_queue(queue);
 	}
 
-	/* Free the array of queues. The call below does not require
-	 * rtnl_lock() because it happens after unregister_netdev().
-	 */
-	netif_set_real_num_tx_queues(vif->dev, 0);
 	vfree(vif->queues);
 	vif->queues = NULL;
+	vif->num_queues = 0;
 
 	free_netdev(vif->dev);
 
diff --git a/drivers/net/xen-netback/xenbus.c b/drivers/net/xen-netback/xenbus.c
index 96c63dc2509e..3d85acd84bad 100644
--- a/drivers/net/xen-netback/xenbus.c
+++ b/drivers/net/xen-netback/xenbus.c
@@ -527,9 +527,7 @@ static void connect(struct backend_info *be)
 	/* Use the number of queues requested by the frontend */
 	be->vif->queues = vzalloc(requested_num_queues *
 				  sizeof(struct xenvif_queue));
-	rtnl_lock();
-	netif_set_real_num_tx_queues(be->vif->dev, requested_num_queues);
-	rtnl_unlock();
+	be->vif->num_queues = requested_num_queues;
 
 	for (queue_index = 0; queue_index < requested_num_queues; ++queue_index) {
 		queue = &be->vif->queues[queue_index];
@@ -546,9 +544,7 @@ static void connect(struct backend_info *be)
 			 * earlier queues can be destroyed using the regular
 			 * disconnect logic.
 			 */
-			rtnl_lock();
-			netif_set_real_num_tx_queues(be->vif->dev, queue_index);
-			rtnl_unlock();
+			be->vif->num_queues = queue_index;
 			goto err;
 		}
 
@@ -561,13 +557,19 @@ static void connect(struct backend_info *be)
 			 * and also clean up any previously initialised queues.
 			 */
 			xenvif_deinit_queue(queue);
-			rtnl_lock();
-			netif_set_real_num_tx_queues(be->vif->dev, queue_index);
-			rtnl_unlock();
+			be->vif->num_queues = queue_index;
 			goto err;
 		}
 	}
 
+	/* Initialisation completed, tell core driver the number of
+	 * active queues.
+	 */
+	rtnl_lock();
+	netif_set_real_num_tx_queues(be->vif->dev, requested_num_queues);
+	netif_set_real_num_rx_queues(be->vif->dev, requested_num_queues);
+	rtnl_unlock();
+
 	xenvif_carrier_on(be->vif);
 
 	unregister_hotplug_status_watch(be);
@@ -582,13 +584,11 @@ static void connect(struct backend_info *be)
 	return;
 
 err:
-	if (be->vif->dev->real_num_tx_queues > 0)
+	if (be->vif->num_queues > 0)
 		xenvif_disconnect(be->vif); /* Clean up existing queues */
 	vfree(be->vif->queues);
 	be->vif->queues = NULL;
-	rtnl_lock();
-	netif_set_real_num_tx_queues(be->vif->dev, 0);
-	rtnl_unlock();
+	be->vif->num_queues = 0;
 	return;
 }
 
@@ -596,7 +596,7 @@ err:
 static int connect_rings(struct backend_info *be, struct xenvif_queue *queue)
 {
 	struct xenbus_device *dev = be->dev;
-	unsigned int num_queues = queue->vif->dev->real_num_tx_queues;
+	unsigned int num_queues = queue->vif->num_queues;
 	unsigned long tx_ring_ref, rx_ring_ref;
 	unsigned int tx_evtchn, rx_evtchn;
 	int err;
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index 5a7872ac3566..2ccb4a02368b 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -1287,7 +1287,7 @@ static irqreturn_t xennet_rx_interrupt(int irq, void *dev_id)
 
 	if (likely(netif_carrier_ok(dev) &&
 		   RING_HAS_UNCONSUMED_RESPONSES(&queue->rx)))
-			napi_schedule(&queue->napi);
+		napi_schedule(&queue->napi);
 
 	return IRQ_HANDLED;
 }
@@ -1437,10 +1437,11 @@ static void xennet_end_access(int ref, void *page)
 static void xennet_disconnect_backend(struct netfront_info *info)
 {
 	unsigned int i = 0;
-	struct netfront_queue *queue = NULL;
 	unsigned int num_queues = info->netdev->real_num_tx_queues;
 
 	for (i = 0; i < num_queues; ++i) {
+		struct netfront_queue *queue = &info->queues[i];
+
 		/* Stop old i/f to prevent errors whilst we rebuild the state. */
 		spin_lock_bh(&queue->rx_lock);
 		spin_lock_irq(&queue->tx_lock);
@@ -1698,8 +1699,6 @@ static int xennet_init_queue(struct netfront_queue *queue)
 		goto exit_free_tx;
 	}
 
-	netif_napi_add(queue->info->netdev, &queue->napi, xennet_poll, 64);
-
 	return 0;
 
  exit_free_tx:
@@ -1790,6 +1789,70 @@ error:
 	return err;
 }
 
+static void xennet_destroy_queues(struct netfront_info *info)
+{
+	unsigned int i;
+
+	rtnl_lock();
+
+	for (i = 0; i < info->netdev->real_num_tx_queues; i++) {
+		struct netfront_queue *queue = &info->queues[i];
+
+		if (netif_running(info->netdev))
+			napi_disable(&queue->napi);
+		netif_napi_del(&queue->napi);
+	}
+
+	rtnl_unlock();
+
+	kfree(info->queues);
+	info->queues = NULL;
+}
+
+static int xennet_create_queues(struct netfront_info *info,
+				unsigned int num_queues)
+{
+	unsigned int i;
+	int ret;
+
+	info->queues = kcalloc(num_queues, sizeof(struct netfront_queue),
+			       GFP_KERNEL);
+	if (!info->queues)
+		return -ENOMEM;
+
+	rtnl_lock();
+
+	for (i = 0; i < num_queues; i++) {
+		struct netfront_queue *queue = &info->queues[i];
+
+		queue->id = i;
+		queue->info = info;
+
+		ret = xennet_init_queue(queue);
+		if (ret < 0) {
+			dev_warn(&info->netdev->dev, "only created %d queues\n",
+				 num_queues);
+			num_queues = i;
+			break;
+		}
+
+		netif_napi_add(queue->info->netdev, &queue->napi,
+			       xennet_poll, 64);
+		if (netif_running(info->netdev))
+			napi_enable(&queue->napi);
+	}
+
+	netif_set_real_num_tx_queues(info->netdev, num_queues);
+
+	rtnl_unlock();
+
+	if (num_queues == 0) {
+		dev_err(&info->netdev->dev, "no queues\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
 /* Common code used when first setting up, and when resuming. */
 static int talk_to_netback(struct xenbus_device *dev,
 			   struct netfront_info *info)
@@ -1826,42 +1889,20 @@ static int talk_to_netback(struct xenbus_device *dev,
 		goto out;
 	}
 
-	/* Allocate array of queues */
-	info->queues = kcalloc(num_queues, sizeof(struct netfront_queue), GFP_KERNEL);
-	if (!info->queues) {
-		err = -ENOMEM;
-		goto out;
-	}
-	rtnl_lock();
-	netif_set_real_num_tx_queues(info->netdev, num_queues);
-	rtnl_unlock();
+	if (info->queues)
+		xennet_destroy_queues(info);
+
+	err = xennet_create_queues(info, num_queues);
+	if (err < 0)
+		goto destroy_ring;
 
 	/* Create shared ring, alloc event channel -- for each queue */
 	for (i = 0; i < num_queues; ++i) {
 		queue = &info->queues[i];
-		queue->id = i;
-		queue->info = info;
-		err = xennet_init_queue(queue);
-		if (err) {
-			/* xennet_init_queue() cleans up after itself on failure,
-			 * but we still have to clean up any previously initialised
-			 * queues. If i > 0, set num_queues to i, then goto
-			 * destroy_ring, which calls xennet_disconnect_backend()
-			 * to tidy up.
-			 */
-			if (i > 0) {
-				rtnl_lock();
-				netif_set_real_num_tx_queues(info->netdev, i);
-				rtnl_unlock();
-				goto destroy_ring;
-			} else {
-				goto out;
-			}
-		}
 		err = setup_netfront(dev, queue, feature_split_evtchn);
 		if (err) {
-			/* As for xennet_init_queue(), setup_netfront() will tidy
-			 * up the current queue on error, but we need to clean up
+			/* setup_netfront() will tidy up the current
+			 * queue on error, but we need to clean up
 			 * those already allocated.
 			 */
 			if (i > 0) {
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index fb4a59830648..a3bf2122a8d5 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -323,11 +323,13 @@ int of_phy_register_fixed_link(struct device_node *np)
 	fixed_link_node = of_get_child_by_name(np, "fixed-link");
 	if (fixed_link_node) {
 		status.link = 1;
-		status.duplex = of_property_read_bool(np, "full-duplex");
+		status.duplex = of_property_read_bool(fixed_link_node,
+						      "full-duplex");
 		if (of_property_read_u32(fixed_link_node, "speed", &status.speed))
 			return -EINVAL;
-		status.pause = of_property_read_bool(np, "pause");
-		status.asym_pause = of_property_read_bool(np, "asym-pause");
+		status.pause = of_property_read_bool(fixed_link_node, "pause");
+		status.asym_pause = of_property_read_bool(fixed_link_node,
+							  "asym-pause");
 		of_node_put(fixed_link_node);
 		return fixed_phy_register(PHY_POLL, &status, np);
 	}
diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig
index 6aea373547f6..ee3de3421f2d 100644
--- a/drivers/ptp/Kconfig
+++ b/drivers/ptp/Kconfig
@@ -74,7 +74,7 @@ config DP83640_PHY
 
 config PTP_1588_CLOCK_PCH
 	tristate "Intel PCH EG20T as PTP clock"
-	depends on X86 || COMPILE_TEST
+	depends on X86_32 || COMPILE_TEST
 	depends on HAS_IOMEM && NET
 	select PTP_1588_CLOCK
 	help