ARM i.MX51: Full iomux support

This iomux file has been constructed from the Freescale pinmux tool.
It contains all pins from the tool, but the datasheet lists some
configurations not present in the tool, these are not yet added.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

7 files changed, 64 insertions, 65 deletions

diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 125a1961fd8c..f8652ef25f85 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -121,15 +121,15 @@ static iomux_v3_cfg_t eukrea_cpuimx51_pads[] = {
 	MX51_PAD_UART1_CTS__UART1_CTS,
 
 	/* I2C2 */
-	MX51_PAD_GPIO_1_2__I2C2_SCL,
-	MX51_PAD_GPIO_1_3__I2C2_SDA,
-	MX51_PAD_NANDF_D10__GPIO_3_30,
+	MX51_PAD_GPIO1_2__I2C2_SCL,
+	MX51_PAD_GPIO1_3__I2C2_SDA,
+	MX51_PAD_NANDF_D10__GPIO3_30,
 
 	/* QUART IRQ */
-	MX51_PAD_NANDF_D15__GPIO_3_25,
-	MX51_PAD_NANDF_D14__GPIO_3_26,
-	MX51_PAD_NANDF_D13__GPIO_3_27,
-	MX51_PAD_NANDF_D12__GPIO_3_28,
+	MX51_PAD_NANDF_D15__GPIO3_25,
+	MX51_PAD_NANDF_D14__GPIO3_26,
+	MX51_PAD_NANDF_D13__GPIO3_27,
+	MX51_PAD_NANDF_D12__GPIO3_28,
 
 	/* USB HOST1 */
 	MX51_PAD_USBH1_CLK__USBH1_CLK,
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
index 7e8fb82d22fc..ad931895d8b6 100644
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -65,9 +65,6 @@
 #define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
 #define	MX51_USB_PLL_DIV_24_MHZ		0x02
 
-#define CPUIMX51SD_GPIO_3_12 IOMUX_PAD(0x57C, 0x194, 3, 0x0, 0, \
-				MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP)
-
 static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = {
 	/* UART1 */
 	MX51_PAD_UART1_RXD__UART1_RXD,
@@ -88,30 +85,33 @@ static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = {
 	MX51_PAD_USBH1_DATA6__USBH1_DATA6,
 	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
 	MX51_PAD_USBH1_STP__USBH1_STP,
-	MX51_PAD_EIM_CS3__GPIO_2_28,		/* PHY nRESET */
+	MX51_PAD_EIM_CS3__GPIO2_28,		/* PHY nRESET */
 
 	/* FEC */
-	MX51_PAD_EIM_DTACK__GPIO_2_31,		/* PHY nRESET */
+	MX51_PAD_EIM_DTACK__GPIO2_31,		/* PHY nRESET */
 
 	/* HSI2C */
-	MX51_PAD_I2C1_CLK__GPIO_4_16,
-	MX51_PAD_I2C1_DAT__GPIO_4_17,
+	MX51_PAD_I2C1_CLK__GPIO4_16,
+	MX51_PAD_I2C1_DAT__GPIO4_17,
 
 	/* CAN */
 	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
 	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
 	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
-	MX51_PAD_CSPI1_SS0__GPIO_4_24,		/* nCS */
-	MX51_PAD_CSI2_PIXCLK__GPIO_4_15,	/* nReset */
-	MX51_PAD_GPIO_1_1__GPIO_1_1,		/* IRQ */
-	MX51_PAD_GPIO_1_4__GPIO_1_4,		/* Control signals */
-	MX51_PAD_GPIO_1_6__GPIO_1_6,
-	MX51_PAD_GPIO_1_7__GPIO_1_7,
-	MX51_PAD_GPIO_1_8__GPIO_1_8,
-	MX51_PAD_GPIO_1_9__GPIO_1_9,
+	MX51_PAD_CSPI1_SS0__GPIO4_24,		/* nCS */
+	MX51_PAD_CSI2_PIXCLK__GPIO4_15,		/* nReset */
+	MX51_PAD_GPIO1_1__GPIO1_1,		/* IRQ */
+	MX51_PAD_GPIO1_4__GPIO1_4,		/* Control signals */
+	MX51_PAD_GPIO1_6__GPIO1_6,
+	MX51_PAD_GPIO1_7__GPIO1_7,
+	MX51_PAD_GPIO1_8__GPIO1_8,
+	MX51_PAD_GPIO1_9__GPIO1_9,
 
 	/* Touchscreen */
-	CPUIMX51SD_GPIO_3_12,			/* IRQ */
+	/* IRQ */
+	_MX51_PAD_CSI1_D8__GPIO3_12 | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
+			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
 };
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index 6cc28058ddcf..e42bd2eb034e 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -50,7 +50,7 @@ static iomux_v3_cfg_t mx51_3ds_pads[] = {
 	MX51_PAD_EIM_D27__UART3_RTS,
 
 	/* CPLD PARENT IRQ PIN */
-	MX51_PAD_GPIO_1_6__GPIO_1_6,
+	MX51_PAD_GPIO1_6__GPIO1_6,
 
 	/* KPP */
 	MX51_PAD_KEY_ROW0__KEY_ROW0,
@@ -68,7 +68,7 @@ static iomux_v3_cfg_t mx51_3ds_pads[] = {
 	MX51_PAD_NANDF_RB2__ECSPI2_SCLK,
 	MX51_PAD_NANDF_RB3__ECSPI2_MISO,
 	MX51_PAD_NANDF_D15__ECSPI2_MOSI,
-	MX51_PAD_NANDF_D12__GPIO_3_28,
+	MX51_PAD_NANDF_D12__GPIO3_28,
 };
 
 /* Serial ports */
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 24e335ca7627..1d231e84107c 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -95,8 +95,8 @@ static iomux_v3_cfg_t mx51babbage_pads[] = {
 	MX51_PAD_KEY_COL5__I2C2_SDA,
 
 	/* HSI2C */
-	MX51_PAD_I2C1_CLK__HSI2C_CLK,
-	MX51_PAD_I2C1_DAT__HSI2C_DAT,
+	MX51_PAD_I2C1_CLK__I2C1_CLK,
+	MX51_PAD_I2C1_DAT__I2C1_DAT,
 
 	/* USB HOST1 */
 	MX51_PAD_USBH1_CLK__USBH1_CLK,
@@ -112,29 +112,29 @@ static iomux_v3_cfg_t mx51babbage_pads[] = {
 	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
 
 	/* USB HUB reset line*/
-	MX51_PAD_GPIO_1_7__GPIO_1_7,
+	MX51_PAD_GPIO1_7__GPIO1_7,
 
 	/* FEC */
 	MX51_PAD_EIM_EB2__FEC_MDIO,
-	MX51_PAD_EIM_EB3__FEC_RDAT1,
-	MX51_PAD_EIM_CS2__FEC_RDAT2,
-	MX51_PAD_EIM_CS3__FEC_RDAT3,
+	MX51_PAD_EIM_EB3__FEC_RDATA1,
+	MX51_PAD_EIM_CS2__FEC_RDATA2,
+	MX51_PAD_EIM_CS3__FEC_RDATA3,
 	MX51_PAD_EIM_CS4__FEC_RX_ER,
 	MX51_PAD_EIM_CS5__FEC_CRS,
 	MX51_PAD_NANDF_RB2__FEC_COL,
-	MX51_PAD_NANDF_RB3__FEC_RXCLK,
-	MX51_PAD_NANDF_RB6__FEC_RDAT0,
-	MX51_PAD_NANDF_RB7__FEC_TDAT0,
+	MX51_PAD_NANDF_RB3__FEC_RX_CLK,
+	MX51_PAD_NANDF_D9__FEC_RDATA0,
+	MX51_PAD_NANDF_D8__FEC_TDATA0,
 	MX51_PAD_NANDF_CS2__FEC_TX_ER,
 	MX51_PAD_NANDF_CS3__FEC_MDC,
-	MX51_PAD_NANDF_CS4__FEC_TDAT1,
-	MX51_PAD_NANDF_CS5__FEC_TDAT2,
-	MX51_PAD_NANDF_CS6__FEC_TDAT3,
+	MX51_PAD_NANDF_CS4__FEC_TDATA1,
+	MX51_PAD_NANDF_CS5__FEC_TDATA2,
+	MX51_PAD_NANDF_CS6__FEC_TDATA3,
 	MX51_PAD_NANDF_CS7__FEC_TX_EN,
 	MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK,
 
 	/* FEC PHY reset line */
-	MX51_PAD_EIM_A20__GPIO_2_14,
+	MX51_PAD_EIM_A20__GPIO2_14,
 
 	/* SD 1 */
 	MX51_PAD_SD1_CMD__SD1_CMD,
@@ -156,8 +156,8 @@ static iomux_v3_cfg_t mx51babbage_pads[] = {
 	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
 	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
 	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
-	MX51_PAD_CSPI1_SS0__GPIO_4_24,
-	MX51_PAD_CSPI1_SS1__GPIO_4_25,
+	MX51_PAD_CSPI1_SS0__GPIO4_24,
+	MX51_PAD_CSPI1_SS1__GPIO4_25,
 };
 
 /* Serial ports */
@@ -188,8 +188,8 @@ static struct imxi2c_platform_data babbage_hsi2c_data = {
 
 static int gpio_usbh1_active(void)
 {
-	iomux_v3_cfg_t usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO_1_27;
-	iomux_v3_cfg_t phyreset_gpio = MX51_PAD_EIM_D21__GPIO_2_5;
+	iomux_v3_cfg_t usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO1_27;
+	iomux_v3_cfg_t phyreset_gpio = MX51_PAD_EIM_D21__GPIO2_5;
 	int ret;
 
 	/* Set USBH1_STP to GPIO and toggle it */
@@ -352,8 +352,8 @@ static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = {
 static void __init mxc_board_init(void)
 {
 	iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
-	iomux_v3_cfg_t power_key = (MX51_PAD_EIM_A27__GPIO_2_21 &
-				~MUX_PAD_CTRL_MASK) | MX51_GPIO_PAD_CTRL_2;
+	iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 |
+		MUX_PAD_CTRL(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
 
 #if defined(CONFIG_CPU_FREQ_IMX)
 	get_cpu_op = mx51_get_cpu_op;
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index 94e7818c5060..b7946f8e8d40 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -94,15 +94,15 @@ static iomux_v3_cfg_t mx51efikamx_pads[] = {
 	MX51_PAD_SD2_DATA3__SD2_DATA3,
 
 	/* SD/MMC WP/CD */
-	MX51_PAD_GPIO_1_0__ESDHC1_CD,
-	MX51_PAD_GPIO_1_1__ESDHC1_WP,
-	MX51_PAD_GPIO_1_7__ESDHC2_WP,
-	MX51_PAD_GPIO_1_8__ESDHC2_CD,
+	MX51_PAD_GPIO1_0__SD1_CD,
+	MX51_PAD_GPIO1_1__SD1_WP,
+	MX51_PAD_GPIO1_7__SD2_WP,
+	MX51_PAD_GPIO1_8__SD2_CD,
 
 	/* leds */
-	MX51_PAD_CSI1_D9__GPIO_3_13,
-	MX51_PAD_CSI1_VSYNC__GPIO_3_14,
-	MX51_PAD_CSI1_HSYNC__GPIO_3_15,
+	MX51_PAD_CSI1_D9__GPIO3_13,
+	MX51_PAD_CSI1_VSYNC__GPIO3_14,
+	MX51_PAD_CSI1_HSYNC__GPIO3_15,
 
 	/* power key */
 	MX51_PAD_PWRKEY,
@@ -110,14 +110,14 @@ static iomux_v3_cfg_t mx51efikamx_pads[] = {
 	/* spi */
 	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
 	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
-	MX51_PAD_CSPI1_SS0__GPIO_4_24,
-	MX51_PAD_CSPI1_SS1__GPIO_4_25,
+	MX51_PAD_CSPI1_SS0__GPIO4_24,
+	MX51_PAD_CSPI1_SS1__GPIO4_25,
 	MX51_PAD_CSPI1_RDY__ECSPI1_RDY,
 	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
 
 	/* reset */
-	MX51_PAD_DI1_PIN13__GPIO_3_2,
-	MX51_PAD_GPIO_1_4__GPIO_1_4,
+	MX51_PAD_DI1_PIN13__GPIO3_2,
+	MX51_PAD_GPIO1_4__GPIO1_4,
 };
 
 /* Serial ports */
diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
index 94c293f217f7..c96d018ff8a2 100644
--- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
@@ -96,13 +96,13 @@ static iomux_v3_cfg_t mbimx51_pads[] = {
 	MX51_PAD_KEY_COL5__UART3_CTS,
 
 	/* TSC2007 IRQ */
-	MX51_PAD_NANDF_D10__GPIO_3_30,
+	MX51_PAD_NANDF_D10__GPIO3_30,
 
 	/* LEDS */
-	MX51_PAD_DISPB2_SER_DIN__GPIO_3_5,
-	MX51_PAD_DISPB2_SER_DIO__GPIO_3_6,
-	MX51_PAD_DISPB2_SER_CLK__GPIO_3_7,
-	MX51_PAD_DISPB2_SER_RS__GPIO_3_8,
+	MX51_PAD_DISPB2_SER_DIN__GPIO3_5,
+	MX51_PAD_DISPB2_SER_DIO__GPIO3_6,
+	MX51_PAD_DISPB2_SER_CLK__GPIO3_7,
+	MX51_PAD_DISPB2_SER_RS__GPIO3_8,
 
 	/* KPP */
 	MX51_PAD_KEY_ROW0__KEY_ROW0,
diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
index c6c232019bb7..c372a4373691 100644
--- a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
@@ -45,14 +45,13 @@
 #include "devices-imx51.h"
 #include "devices.h"
 
-#define MBIMXSD_GPIO_3_31 IOMUX_PAD(0x554, 0x16C, 3, 0x0, 0, \
-				MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP)
-
 static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 	/* LED */
-	MX51_PAD_NANDF_D10__GPIO_3_30,
+	MX51_PAD_NANDF_D10__GPIO3_30,
 	/* SWITCH */
-	MBIMXSD_GPIO_3_31,
+	_MX51_PAD_NANDF_D9__GPIO3_31 | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
+			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
 	/* UART2 */
 	MX51_PAD_UART2_RXD__UART2_RXD,
 	MX51_PAD_UART2_TXD__UART2_TXD,