summaryrefslogtreecommitdiff
path: root/drivers/block
AgeCommit message (Collapse)AuthorFilesLines
2008-05-07block: avoid duplicate calls to get_part() in disk stat codeJens Axboe1-4/+6
get_part() is fairly expensive, as it O(N) loops over partitions to find the right one. In lots of normal IO paths we end up looking up the partition twice, to make matters even worse. Change the stat add code to accept a passed in partition instead. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds1-24/+39
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (32 commits) USB GADGET/PERIPHERAL: g_file_storage Bulk-Only Transport compliance, clear-feature ignore USB GADGET/PERIPHERAL: g_file_storage Bulk-Only Transport compliance usb_serial: some coding style fixes USB: Remove redundant dependencies on USB_ATM. USB: UHCI: disable remote wakeup when it's not needed USB: OHCI: work around bogus compiler warning USB: add Cypress c67x00 OTG controller HCD driver USB: add Cypress c67x00 OTG controller core driver USB: add Cypress c67x00 low level interface code USB: airprime: unlock mutex instead of trying to lock it again USB: storage: Update mailling list address USB: storage: UNUSUAL_DEVS() for PanDigital Picture frame. USB: Add the USB 2.0 extension descriptor. USB: add more FTDI device ids USB: fix cannot work usb storage when using ohci-sm501 usb: gadget zero timer init fix usb: gadget zero style fixups (mostly whitespace) usb serial gadget: CDC ACM fixes usb: pxa27x_udc driver USB: INTOVA Pixtreme camera mass storage device ...
2008-05-02ub: CosmeticsPete Zaitcev1-9/+6
Fix a few comments and printk statements. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02ub: Ignore bad residuePete Zaitcev1-8/+14
I hoped to continue to ignore this problem or use libusual, but these days it's simpler to work around than to deal with it. Let's attempt to use bad residue devices and hope that upper level integrity checks catch any problems (e.g. please use sha1sum on your backups). Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02ub: Tune retriesPete Zaitcev1-5/+4
Make ub to fail faster in hopeless cases. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02ub: Fix timeoutsPete Zaitcev1-2/+15
The wodim says: "close track/session scsi sendcmd: cmd timeout after 5.000 (480) s" This happened because we ignored the supplied timeout and used 5s. It's not completely correct to apply a timeout meant for the complete command to any single URB, but we don't have many URBs per command, so this is simple and works. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02virtio: add virtio disk geometry featureRyan Harper1-4/+20
Rather than faking up some geometry, allow the backend to push the disk geometry via virtio pci config option. Keep the old geo code around for compatibility. Signed-off-by: Ryan Harper <ryanh@us.ibm.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (modified to single struct)
2008-05-02virtio: explicit advertisement of driver featuresRusty Russell1-1/+7
A recent proposed feature addition to the virtio block driver revealed some flaws in the API: in particular, we assume that feature negotiation is complete once a driver's probe function returns. There is nothing in the API to require this, however, and even I didn't notice when it was violated. So instead, we require the driver to specify what features it supports in a table, we can then move the feature negotiation into the virtio core. The intersection of device and driver features are presented in a new 'features' bitmap in the struct virtio_device. Note that this highlights the difference between Linux unsigned-long bitmaps where each unsigned long is in native endian, and a straight-forward little-endian array of bytes. Drivers can still remove feature bits in their probe routine if they really have to. API changes: - dev->config->feature() no longer gets and acks a feature. - drivers should advertise their features in the 'feature_table' field - use virtio_has_feature() for extra sanity when checking feature bits Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-05-02virtio: change config to guest endian.Rusty Russell1-2/+2
A recent proposed feature addition to the virtio block driver revealed some flaws in the API, in particular how easy it is to break big endian machines. The virtio config space was originally chosen to be little-endian, because we thought the config might be part of the PCI config space for virtio_pci. It's actually a separate mmio region, so that argument holds little water; as only x86 is currently using the virtio mechanism, we can change this (but must do so now, before the impending s390 merge). API changes: - __virtio_config_val() just becomes a striaght vdev->config_get() call. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-05-02virtio-blk: fix remove oopsMarcelo Tosatti1-2/+0
Do not unregister the major at device remove, since there might be another device instances around. (qemu) pci_del 0 11 (qemu) ACPI: PCI interrupt for device 0000:00:0b.0 disabled (qemu) pci_del 0 10 (qemu) ------------[ cut here ]------------ WARNING: at block/genhd.c:126 unregister_blkdev+0x74/0x9e() ACPI: PCI interrupt for device 0000:00:0a.0 disabled Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-05-02virtio: de-structify virtio_block status byteRusty Russell1-3/+3
Ron Minnich points out that a struct containing a char is not always sizeof(char); simplest to remove the structure to avoid confusion. Cc: "ron minnich" <rminnich@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-05-01cciss: assign PDE->data before gluing PDE into /proc treeDenis V. Lunev1-6/+2
Simply replace proc_create and further data assigned with proc_create_data. Signed-off-by: Denis V. Lunev <den@openvz.org> Cc: Alexey Dobriyan <adobriyan@openvz.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Mike Miller <mike.miller@hp.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30brd: modify ramdisk device to be able to manage partitionsLaurent Vivier1-5/+14
This patch adds partition management for Block RAM Device (BRD). This patch is done to keep in sync BRD and loop device drivers. This patch adds a parameter to the module, max_part, to specify the maximum number of partitions per RAM device. Example: # modprobe brd max_part=63 # ls -l /dev/ram* brw-rw---- 1 root disk 1, 0 2008-04-03 13:39 /dev/ram0 brw-rw---- 1 root disk 1, 64 2008-04-03 13:39 /dev/ram1 brw-rw---- 1 root disk 1, 640 2008-04-03 13:39 /dev/ram10 brw-rw---- 1 root disk 1, 704 2008-04-03 13:39 /dev/ram11 brw-rw---- 1 root disk 1, 768 2008-04-03 13:39 /dev/ram12 brw-rw---- 1 root disk 1, 832 2008-04-03 13:39 /dev/ram13 brw-rw---- 1 root disk 1, 896 2008-04-03 13:39 /dev/ram14 brw-rw---- 1 root disk 1, 960 2008-04-03 13:39 /dev/ram15 brw-rw---- 1 root disk 1, 128 2008-04-03 13:39 /dev/ram2 brw-rw---- 1 root disk 1, 192 2008-04-03 13:39 /dev/ram3 brw-rw---- 1 root disk 1, 256 2008-04-03 13:39 /dev/ram4 brw-rw---- 1 root disk 1, 320 2008-04-03 13:39 /dev/ram5 brw-rw---- 1 root disk 1, 384 2008-04-03 13:39 /dev/ram6 brw-rw---- 1 root disk 1, 448 2008-04-03 13:39 /dev/ram7 brw-rw---- 1 root disk 1, 512 2008-04-03 13:39 /dev/ram8 brw-rw---- 1 root disk 1, 576 2008-04-03 13:39 /dev/ram9 # fdisk /dev/ram0 Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel Building a new DOS disklabel. Changes will remain in memory only, until you decide to write them. After that, of course, the previous content won't be recoverable. Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite) Command (m for help): o Building a new DOS disklabel. Changes will remain in memory only, until you decide to write them. After that, of course, the previous content won't be recoverable. Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite) Command (m for help): n Command action e extended p primary partition (1-4) p Partition number (1-4): 1 First cylinder (1-2, default 1): 1 Last cylinder or +size or +sizeM or +sizeK (1-2, default 2): 2 Command (m for help): w The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks. # ls -l /dev/ram0* brw-rw---- 1 root disk 1, 0 2008-04-03 13:40 /dev/ram0 brw-rw---- 1 root disk 1, 1 2008-04-03 13:40 /dev/ram0p1 # mkfs /dev/ram0p1 mke2fs 1.40-WIP (14-Nov-2006) Filesystem label= OS type: Linux Block size=1024 (log=0) Fragment size=1024 (log=0) 4016 inodes, 16032 blocks 801 blocks (5.00%) reserved for the super user First data block=1 Maximum filesystem blocks=16515072 2 block groups 8192 blocks per group, 8192 fragments per group 2008 inodes per group Superblock backups stored on blocks: 8193 Writing inode tables: done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 26 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. # mount /dev/ram0p1 /mnt df /mnt Filesystem 1K-blocks Used Available Use% Mounted on /dev/ram0p1 15521 138 14582 1% /mnt # ls -l /mnt total 12 drwx------ 2 root root 12288 2008-04-03 13:41 lost+found # umount /mnt # rmmod brd Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Acked-by: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds6-10/+5
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: Skip I/O merges when disabled block: add large command support block: replace sizeof(rq->cmd) with BLK_MAX_CDB ide: use blk_rq_init() to initialize the request block: use blk_rq_init() to initialize the request block: rename and export rq_init() block: no need to initialize rq->cmd with blk_get_request block: no need to initialize rq->cmd in prepare_flush_fn hook block/blk-barrier.c:blk_ordered_cur_seq() mustn't be inline block/elevator.c:elv_rq_merge_ok() mustn't be inline block: make queue flags non-atomic block: add dma alignment and padding support to blk_rq_map_kern unexport blk_max_pfn ps3disk: Remove superfluous cast block: make rq_init() do a full memset() relay: fix splice problem
2008-04-29drivers/block: use get_unaligned_* helpersHarvey Harrison2-14/+14
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Ed L. Cashin <ecashin@coraid.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29Remove duplicated unlikely() in IS_ERR()Hirofumi Nakagawa1-1/+1
Some drivers have duplicated unlikely() macros. IS_ERR() already has unlikely() in itself. This patch cleans up such pointless code. Signed-off-by: Hirofumi Nakagawa <hnakagawa@miraclelinux.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Jeff Garzik <jeff@garzik.org> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Patrick McHardy <kaber@trash.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29remove aoedev_isbusy()Adrian Bunk2-19/+0
Remove the no longer used aoedev_isbusy(). Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29NBD: add partition supportLaurent Vivier1-4/+21
Permit the use of partitions with network block devices (NBD). A new parameter is introduced to define how many partition we want to be able to manage per network block device. This parameter is "max_part". For instance, to manage 63 partitions / loop device, we will do: [on the server side] # nbd-server 1234 /dev/sdb [on the client side] # modprobe nbd max_part=63 # ls -l /dev/nbd* brw-rw---- 1 root disk 43, 0 2008-03-25 11:14 /dev/nbd0 brw-rw---- 1 root disk 43, 64 2008-03-25 11:11 /dev/nbd1 brw-rw---- 1 root disk 43, 640 2008-03-25 11:11 /dev/nbd10 brw-rw---- 1 root disk 43, 704 2008-03-25 11:11 /dev/nbd11 brw-rw---- 1 root disk 43, 768 2008-03-25 11:11 /dev/nbd12 brw-rw---- 1 root disk 43, 832 2008-03-25 11:11 /dev/nbd13 brw-rw---- 1 root disk 43, 896 2008-03-25 11:11 /dev/nbd14 brw-rw---- 1 root disk 43, 960 2008-03-25 11:11 /dev/nbd15 brw-rw---- 1 root disk 43, 128 2008-03-25 11:11 /dev/nbd2 brw-rw---- 1 root disk 43, 192 2008-03-25 11:11 /dev/nbd3 brw-rw---- 1 root disk 43, 256 2008-03-25 11:11 /dev/nbd4 brw-rw---- 1 root disk 43, 320 2008-03-25 11:11 /dev/nbd5 brw-rw---- 1 root disk 43, 384 2008-03-25 11:11 /dev/nbd6 brw-rw---- 1 root disk 43, 448 2008-03-25 11:11 /dev/nbd7 brw-rw---- 1 root disk 43, 512 2008-03-25 11:11 /dev/nbd8 brw-rw---- 1 root disk 43, 576 2008-03-25 11:11 /dev/nbd9 # nbd-client localhost 1234 /dev/nbd0 Negotiation: ..size = 80418240KB bs=1024, sz=80418240 -------NOTE, RFC: partition table is not automatically read. The driver sets bdev->bd_invalidated to 1 to force the read of the partition table of the device, but this is done only on an open of the device. So we have to do a "touch /dev/nbdX" or something like that. It can't be done from the nbd-client or nbd driver because at this level we can't ask to read the partition table and to serve the request at the same time (-> deadlock) If someone has a better idea, I'm open to any suggestion. -------NOTE, RFC # fdisk -l /dev/nbd0 Disk /dev/nbd0: 82.3 GB, 82348277760 bytes 255 heads, 63 sectors/track, 10011 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/nbd0p1 * 1 9965 80043831 83 Linux /dev/nbd0p2 9966 10011 369495 5 Extended /dev/nbd0p5 9966 10011 369463+ 82 Linux swap / Solaris # ls -l /dev/nbd0* brw-rw---- 1 root disk 43, 0 2008-03-25 11:16 /dev/nbd0 brw-rw---- 1 root disk 43, 1 2008-03-25 11:16 /dev/nbd0p1 brw-rw---- 1 root disk 43, 2 2008-03-25 11:16 /dev/nbd0p2 brw-rw---- 1 root disk 43, 5 2008-03-25 11:16 /dev/nbd0p5 # mount /dev/nbd0p1 /mnt # ls /mnt bin dev initrd lost+found opt sbin sys var boot etc initrd.img media proc selinux tmp vmlinuz cdrom home lib mnt root srv usr # umount /mnt # nbd-client -d /dev/nbd0 # ls -l /dev/nbd0* brw-rw---- 1 root disk 43, 0 2008-03-25 11:16 /dev/nbd0 -------NOTE On "nbd-client -d", we can do an iocl(BLKRRPART) to update partition table: as the size of the device is 0, we don't have to serve the partition manager request (-> no deadlock). -------NOTE Signed-off-by: Paul Clements <paul.clements@steeleye.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29NBD: allow nbd to be used locallyLaurent Vivier1-49/+95
This patch allows Network Block Device to be mounted locally (nbd-client to nbd-server over 127.0.0.1). It creates a kthread to avoid the deadlock described in NBD tools documentation. So, if nbd-client hangs waiting for pages, the kblockd thread can continue its work and free pages. I have tested the patch to verify that it avoids the hang that always occurs when writing to a localhost nbd connection. I have also tested to verify that no performance degradation results from the additional thread and queue. Patch originally from Laurent Vivier. Signed-off-by: Paul Clements <paul.clements@steeleye.com> Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29drivers: use non-racy method for proc entries creation (2)Denis V. Lunev1-6/+1
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data be setup before gluing PDE to main tree. Signed-off-by: Denis V. Lunev <den@openvz.org> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Peter Osterlund <petero2@telia.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Neil Brown <neilb@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29proc: remove proc_root_driverAlexey Dobriyan3-6/+6
Use creation by full path: "driver/foo". Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29xen: make blkif_getgeo staticHarvey Harrison1-1/+1
Introduced between 2.6.25-rc2 and -rc3 drivers/block/xen-blkfront.c:139:5: warning: symbol 'blkif_getgeo' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29drivers/block/floppy.c: replace init_module&cleanup_module with ↵Jon Schindler1-2/+4
module_init&module_exit Replace init_module and cleanup_module with static functions and module_init/module_exit. Signed-off-by: Jon Schindler <jkschind@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29block: use blk_rq_init() to initialize the requestFUJITA Tomonori2-3/+2
Any path needs to call it to initialize the request. This is a preparation for large command support, which needs to initialize the request in a proper way (that is, just doing a memset() will not work). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-29block: no need to initialize rq->cmd with blk_get_requestFUJITA Tomonori1-2/+0
blk_get_request initializes rq->cmd (rq_init does) so the users don't need to do that. The purpose of this patch is to remove sizeof(rq->cmd) and &rq->cmd, as a preparation for large command support, which changes rq->cmd from the static array to a pointer. sizeof(rq->cmd) will not make sense and &rq->cmd won't work. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-29block: no need to initialize rq->cmd in prepare_flush_fn hookFUJITA Tomonori1-1/+0
The block layer initializes rq->cmd (queue_flush calls rq_init) so prepare_flush_fn hooks don't need to do that. The purpose of this patch is to remove sizeof(rq->cmd), as a preparation for large command support, which changes rq->cmd from the static array to a pointer. sizeof(rq->cmd) will not make sense. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-29block: make queue flags non-atomicNick Piggin2-2/+2
We can save some atomic ops in the IO path, if we clearly define the rules of how to modify the queue flags. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-29ps3disk: Remove superfluous castGeert Uytterhoeven1-2/+1
As ps3disk is a ppc64-only driver, sector_t equals to unsigned long, and the cast is not needed. Reuse in another (possibly 32-bit) driver is protected by the safety net called `compiler warning' (with the cast, it may silently truncate to 32-bit). If sector_t ever changes, we will get a compiler warning as well (with the cast, we won't). Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-28return pfn from direct_access, for XIPJared Hulbert1-2/+3
Alter the block device ->direct_access() API to work with the new get_xip_mem() API (that requires both kaddr and pfn are returned). Some architectures will not do the right thing in their virt_to_page() for use by XIP (to translate from the kernel virtual address returned by direct_access(), to a user mappable pfn in XIP's page fault handler. However, we can't switch it to just return the pfn and not the kaddr, because we have no good way to get a kva from a pfn, and XIP requires the kva for its read(2) and write(2) handlers. So we have to return both. Signed-off-by: Jared Hulbert <jaredeh@gmail.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-mm@kvack.org Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-24xen: Add compatibility aliases for frontend driversMark McLoughlin1-0/+1
Before getting merged, xen-blkfront was xenblk and xen-netfront was xennet. Temporarily adding compatibility module aliases eases upgrades from older versions by e.g. allowing mkinitrd to find the new version of the module. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24xen: Module autoprobing support for frontend driversMark McLoughlin1-0/+1
Add module aliases to support autoprobing modules for xen frontend devices. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24xen blkfront: Delay wait for block devices until after the disk is addedChristian Limpach1-0/+11
When the xen block frontend driver is built as a module the module load is only synchronous up to the point where the frontend and the backend become connected rather than when the disk is added. This means that there can be a race on boot between loading the module and loading the dm-* modules and doing the scan for LVM physical volumes (all in the initrd). In the failure case the disk is not present until after the scan for physical volumes is complete. Taken from: http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/11483a00c017 Signed-off-by: Christian Limpach <Christian.Limpach@xensource.com> Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24xen/blkfront: use bdget_diskJeremy Fitzhardinge1-2/+1
info->dev is never initialized to anything, so bdget(info->dev) is meaningless. Get rid of info->dev, and use bdget_disk on the gendisk. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-24xen: Make xen-blkfront write its protocol ABI to xenstoreMarkus Armbruster1-0/+7
Frontends are expected to write their protocol ABI to xenstore. Since the protocol ABI defaults to the backend's native ABI, things work fine without that as long as the frontend's native ABI is identical to the backend's native ABI. This is not the case for xen-blkfront running 32-on-64, because its ABI differs between 32 and 64 bit, and thus needs this fix. Based on http://xenbits.xensource.com/xen-unstable.hg?rev/c545932a18f3 and http://xenbits.xensource.com/xen-unstable.hg?rev/ffe52263b430 by Gerd Hoffmann <kraxel@suse.de> Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Jeremy Fitzhardinge <Jeremy.Fitzhardinge@citrix.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-22fix brd allocation flagsPetr Tesarik1-1/+1
While looking at the implementation of the Ram backed block device driver, I stumbled across a write-only local variable, which makes little sense, so I assume it should actually work like this: Signed-off-by: Petr Tesarik <ptesarik@suse.cz> Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-21Merge branch 'for-2.6.26' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds4-10/+41
* 'for-2.6.26' of git://git.kernel.dk/linux-2.6-block: block: fix blk_register_queue() return value block: fix memory hotplug and bouncing in block layer block: replace remaining __FUNCTION__ occurrences Kconfig: clean up block/Kconfig help descriptions cciss: fix warning oops on rmmod of driver cciss: Fix race between disk-adding code and interrupt handler block: move the padding adjustment to blk_rq_map_sg block: add bio_copy_user_iov support to blk_rq_map_user_iov block: convert bio_copy_user to bio_copy_user_iov loop: manage partitions in disk image cdrom: use kmalloced buffers instead of buffers on stack cdrom: make unregister_cdrom() return void cdrom: use list_head for cdrom_device_info list cdrom: protect cdrom_device_info list by mutex cdrom: cleanup hardcoded error-code cdrom: remove ifdef CONFIG_SYSCTL
2008-04-21Merge branch 'master' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (202 commits) [POWERPC] Fix compile breakage for 64-bit UP configs [POWERPC] Define copy_siginfo_from_user32 [POWERPC] Add compat handler for PTRACE_GETSIGINFO [POWERPC] i2c: Fix build breakage introduced by OF helpers [POWERPC] Optimize fls64() on 64-bit processors [POWERPC] irqtrace support for 64-bit powerpc [POWERPC] Stacktrace support for lockdep [POWERPC] Move stackframe definitions to common header [POWERPC] Fix device-tree locking vs. interrupts [POWERPC] Make pci_bus_to_host()'s struct pci_bus * argument const [POWERPC] Remove unused __max_memory variable [POWERPC] Simplify xics direct/lpar irq_host setup [POWERPC] Use pseries_setup_i8259_cascade() in pseries_mpic_init_IRQ() [POWERPC] Turn xics_setup_8259_cascade() into a generic pseries_setup_i8259_cascade() [POWERPC] Move xics_setup_8259_cascade() into platforms/pseries/setup.c [POWERPC] Use asm-generic/bitops/find.h in bitops.h [POWERPC] 83xx: mpc8315 - fix USB UTMI Host setup [POWERPC] 85xx: Fix the size of qe muram for MPC8568E [POWERPC] 86xx: mpc86xx_hpcn - Temporarily accept old dts node identifier. [POWERPC] 86xx: mark functions static, other minor cleanups ...
2008-04-21block: replace remaining __FUNCTION__ occurrencesHarvey Harrison1-3/+3
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-21cciss: fix warning oops on rmmod of driverscameron@beardog.cca.cpqcorp.net1-1/+1
* Fix oops on cciss rmmod due to calling pci_free_consistent with irqs disabled. Signed-off-by: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-21cciss: Fix race between disk-adding code and interrupt handlerscameron@beardog.cca.cpqcorp.net1-1/+16
Fix race condition between cciss_init_one(), cciss_update_drive_info(), and cciss_check_queues(). Signed-off-by: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-21loop: manage partitions in disk imageLaurent Vivier1-5/+21
This patch allows to use loop device with partitionned disk image. Original behavior of loop is not modified. A new parameter is introduced to define how many partition we want to be able to manage per loop device. This parameter is "max_part". For instance, to manage 63 partitions / loop device, we will do: # modprobe loop max_part=63 # ls -l /dev/loop?* brw-rw---- 1 root disk 7, 0 2008-03-05 14:55 /dev/loop0 brw-rw---- 1 root disk 7, 64 2008-03-05 14:55 /dev/loop1 brw-rw---- 1 root disk 7, 128 2008-03-05 14:55 /dev/loop2 brw-rw---- 1 root disk 7, 192 2008-03-05 14:55 /dev/loop3 brw-rw---- 1 root disk 7, 256 2008-03-05 14:55 /dev/loop4 brw-rw---- 1 root disk 7, 320 2008-03-05 14:55 /dev/loop5 brw-rw---- 1 root disk 7, 384 2008-03-05 14:55 /dev/loop6 brw-rw---- 1 root disk 7, 448 2008-03-05 14:55 /dev/loop7 And to attach a raw partitionned disk image, the original losetup is used: # losetup -f etch.img # ls -l /dev/loop?* brw-rw---- 1 root disk 7, 0 2008-03-05 14:55 /dev/loop0 brw-rw---- 1 root disk 7, 1 2008-03-05 14:57 /dev/loop0p1 brw-rw---- 1 root disk 7, 2 2008-03-05 14:57 /dev/loop0p2 brw-rw---- 1 root disk 7, 5 2008-03-05 14:57 /dev/loop0p5 brw-rw---- 1 root disk 7, 64 2008-03-05 14:55 /dev/loop1 brw-rw---- 1 root disk 7, 128 2008-03-05 14:55 /dev/loop2 brw-rw---- 1 root disk 7, 192 2008-03-05 14:55 /dev/loop3 brw-rw---- 1 root disk 7, 256 2008-03-05 14:55 /dev/loop4 brw-rw---- 1 root disk 7, 320 2008-03-05 14:55 /dev/loop5 brw-rw---- 1 root disk 7, 384 2008-03-05 14:55 /dev/loop6 brw-rw---- 1 root disk 7, 448 2008-03-05 14:55 /dev/loop7 # mount /dev/loop0p1 /mnt # ls /mnt bench cdrom home lib mnt root srv usr bin dev initrd lost+found opt sbin sys var boot etc initrd.img media proc selinux tmp vmlinuz # umount /mnt # losetup -d /dev/loop0 Of course, the same behavior can be done using kpartx on a loop device, but modifying loop avoids to stack several layers of block device (loop + device mapper), this is a very light modification (40% of modifications are to manage the new parameter). Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-18drivers: Remove unnecessary inclusions of asm/semaphore.hMatthew Wilcox1-1/+0
None of these files use any of the functionality promised by asm/semaphore.h. It's possible that they rely on it dragging in some unrelated header file, but I can't build all these files, so we'll have fix any build failures as they come up. Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-04-17Merge branch 'master' of ↵David S. Miller2-9/+30
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
2008-04-14Merge branch 'linux-2.6'Paul Mackerras3-9/+36
2008-04-11cciss: error: implicit declaration of function 'sg_init_table'Mike Pagano1-0/+1
This patch adds the missing include directive <linux/scatterlist.h> to the cciss.c source file.   This was discovered by our release team when building the kernel for the Alpha architecture. Errors were found as references to functions 'sg_init_table' and 'sg_page' do not exist without the include for Alpha. Signed-off-by: Mike Pagano <mpagano@gentoo.org> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-08ub: remove BUG() after __blk_end_request and fix the condition causing itPete Zaitcev1-9/+29
When __blk_end_request returns nonzero, it means that the request was not completely processed and some BIOs are still attached. Since we have dequeued it by that time, it means leaking requests and hanging processes, which is why BUG() was in there. In ub this happens if a packet request ends normally, but with residue (e.g. when scsi_id issues INQUIRY). The fix is to make sure that arguments passed to __blk_end_request are correct: the full request length and not just transferred length. The transferred length is indicated to applications by adjusting rq->data_len with old, unchanged code outside of this patch. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Cc: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Cc: Greg KH <greg@kroah.com> Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-03Merge branch 'master' of ↵David S. Miller4-1090/+6
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
2008-04-02nbd: prevent sock_xmit from attempting to use a NULL socketMike Snitzer1-0/+6
NBD does not protect the nbd_device's socket from becoming NULL during receives. This closes a race with the NBD_CLEAR_SOCK ioctl (nbd-client -d) setting the nbd_device's socket to NULL right before NBD calls sock_xmit. Signed-off-by: Mike Snitzer <snitzer@gmail.com> Cc: Paul Clements <paul.clements@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-01[POWERPC] Use FIELD_SIZEOF in drivers/block/viodasd.cJulia Lawall1-1/+1
Robert P.J. Day proposed to use the macro FIELD_SIZEOF in replace of code that matches its definition. The modification was made using the following semantic patch (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ type t; identifier f; @@ - (sizeof(((t*)0)->f)) + FIELD_SIZEOF(t, f) @depends on haskernel@ type t; identifier f; @@ - sizeof(((t*)0)->f) + FIELD_SIZEOF(t, f) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-26[NET] NETNS: Omit net_device->nd_net without CONFIG_NET_NS.YOSHIFUJI Hideaki1-1/+1
Introduce per-net_device inlines: dev_net(), dev_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 01:06:29 +0000