Snapshot 1.9.4 (2009-07-xx) =========================== API additions: cairo_meta_surface_create() cairo_meta_surface_ink_extents() cairo_meta_surface_replay() Finally exporting the internal meta-surface so that applications have a method to record and replay a sequence of drawing commands. cairo_in_clip() Determines whether a given point is inside the current clip. ??? Should this be called cairo_in_paint() instead? in-clip is the test that is performed, but in-paint would be similar to in-fill and in-stroke. New utilities: cairo-test-trace A companion to cairo-perf-trace, this utility replays a trace against multiple targets in parallel and looks for differences in the output, and then records any drawing commands that cause a failure. Future plans: Further minimisation of the fail trace using "delta debugging". More control over test/reference targets. Backend improvements: xlib Server-side gradients. The theory is that we can offload computation of gradients to the GPU and avoid pushing large images over the connection. Even if the driver has to fallback and use pixman to render a temporary source, it should be able to do so in a more efficient manner than Cairo itself. However, cairo-perf suggests otherwise: On tiny, Celeron/i915: before: firefox-20090601 211.585 after: firefox-20090601 270.939 and on tiger, CoreDuo/nvidia: before: firefox-20090601 70.143 after: firefox-20090601 87.326 In particular, looking at tiny: xlib-rgba paint-with-alpha_linear-rgba_over-512 47.11 (47.16 0.05%) -> 123.42 (123.72 0.13%): 2.62x slowdown █▋ xlib-rgba paint-with-alpha_linear3-rgba_over-512 47.27 (47.32 0.04%) -> 123.78 (124.04 0.13%): 2.62x slowdown █▋ New experimental backends: QT OpenVG - The initial work was done by Øyvind Kolås, and made ready for inclusion by Pierre Tardy. OpenGL - An advanced OpenGL compositor. The aim is to write a integrate directed rendering using OpenGL at a high-level into Cairo. In contrast to the previous attempt using Glitz which tried to implement the RENDER protocol on top of OpenGL, using the high-level interface should permit greater flexibility and more offloading onto the GPU. The initial work on the backend was performed by Eric Anholt. Long standing bugs fixed: Self-intersecting strokes. A long standing bug where the coverage from overlapping semi-opaque strokes (including neighbouring edges) was simply summed in lieu of a costly global calculation has been fixed (by performing the costly global calculation!) In order to mitigate the extra cost, the tessellator has been overhauled and tune, which handles the fallback for when we are unable to use the new span rasteriser on the stroke (e.g. when using the current RENDER protocol). The large number of pixel artefacts that implementing self-intersection elimination removes is ample justification for the potential performance regression. If you unfortunately do suffer a substantial performance regression in your application, please consider obtaining a cairo-trace and submitting it to us for analysis and inclusion into our performance suite. Special thanks: To the AuroraUX team for providing access to one of their OpenSolaris machines for cairo and pixman development. http://www.auroraux.org/ Snapshot 1.9.2 (2009-06-12) =========================== API additions: cairo_surface_set_mime_data() cairo_surface_get_mime_data() Should this take unsigned int, unsigned long or size_t for the length parameter? (Some datasets may be >4GiB in size.) Associate an alternate, compressed, representation for a surface. Currently: "image/jp2" (JPEG2000) is understood by PDF >= 1.5 "image/jpeg" is understood by PDF,PS,SVG,win32-printing. "image/png" is understood by SVG. cairo_pdf_version_t cairo_pdf_surface_restrict_to_version() cairo_pdf_get_versions() cairo_pdf_version_to_string() Similar to restrict to version and level found in SVG and PS, these limit the features used in the output to comply with the PDF specification for that version. CAIRO_STATUS_INVALID_SIZE Indicates that the request surface size is not supported by the backend. This generally indicates that the request is too large. CAIRO_STATUS_USER_FONT_NOT_IMPLEMENTED Indicates that a required callback for a user-font was not implemented. CAIRO_STATUS_LAST_STATUS This is a special value to indicate the number of status values enumerated at compile time. (This may differ to the number known at run-time.) The built-in twin font is now called "@cairo:" and supports a limited set of options like "@cairo:mono". Where are these specified? cairo_in_fill() now uses HTML Canvas semantics, all edges are inside. New experimental backends: CairoScript New utility: cairo-trace and cairo-perf-trace cairo-trace generates a human-readable, replayable, compact(-ish!) representation of the sequences of drawing commands made by an application. Under the util/cairo-script directory is a library to replay traces. perf/cairo-perf-trace replays traces against multiple backends and makes useful benchmark reports. This is integrated with 'make perf'. You may collect your own traces or take advantage of traces collected by the community: git://git.cairographics.org/git/cairo-traces (Put this into perf/cairo-traces to run these as part of "make perf".) There is additional WIP in building a debugging tool for cairo applications based on CairoScript (currently very preliminary, mostly serves to show that GtkSourceView is too slow) : people.freedesktop.org:~ickle/sphinx Test suite overhaul: The test suite is undergoing an overhaul, primarily to improve its speed and utility. (Expect more changes in the near future to improve XFAIL handling.) Optimisations: polygon rasterisation! Joonas implemented the Tor polygon scan converter, on typical geometry is about 30% faster for the image backend. Bovine Polaroids! For those not in on the joke, this is the long awaited "copy-on-write snapshot" or "COW snapshot" support. The user-visible feature is that including the same image multiple times into a PDF file should result in only a single instance of that image in the final output. This is unlike previous versions of cairo which would generate very large PDF files with multiple copies of the same image. Adrian says that the PDF is not quite working as well as it should yet, so we hope for futher improvements before cairo 1.10. Bug fixes: EXTEND_PAD. Better handling of large scale-factors on image patterns. Emit /Interpolate for PS,PDF images. Global glyph cache - cap on the total number of inactive glyphs, should prove fairer for fonts with larger glyph sets. Compilation without fontconfig Improved handling of low-bitdepth sources (e.g. copying the contents of 16-bit xserver windows) Regressions: cairo_traps_extract_region >10x slower. Fix pending. Still to come: Region tracking API (ssp) for damage tracking, hit testing etc mime-surface An expiremental OpenGL backend? Tweaks to tessellator, allocations of patterns, delayed initialisation of the xlib backend (reduce the cairo overhead of render_bench by ~80%). Release 1.8.8 (2009-06-16 Chris Wilson ) ================================================================== The cairo community is pleased to announce the 1.8.8 release of the cairo graphics library. This is the fourth update to cairo's stable 1.8 series and contains a small number of bug fixes (in particular a few corrections to the documentation and a few fixes in the FreeType font backend). This is being released just over six months after cairo 1.8.6. We recommend that everyone using cairo upgrade to 1.8.8. -Chris Build fixes ----------- There were reports of incompatibilities with the autotools bundled in with the 1.8.6 tarball. This release has been built with automake-1.10.2 and autoconf-2.63. The configure check for FreeType has been improved: typo in check for version of freetype in configure script https://bugs.freedesktop.org/show_bug.cgi?id=19283 Compilation on 64-bit MacOS/X fixes: Cannot build cairo_quartz_font_face_create_for_atsu_font_id on 64-bit Mac OS X https://bugs.freedesktop.org/show_bug.cgi?id=15702 Bug fixes --------- Uninitialised status return within _cairo_clip_intersect_mask(). This caused random crashes and general mayhem as an error could be generated causing all rendering to the context to stop. Avoid transforming nearly-degenerate matrices into degenerate matrices: Painting stops in this case, using -moz-transform: scale, rotate and video https://bugzilla.mozilla.org/show_bug.cgi?id=467423 A few FreeType font handling bugs were fixed: Rendering with PANGO_GRAVITY_EAST leads to different results with image and pdf https://bugs.freedesktop.org/show_bug.cgi?id=21985 Don't call FT_Done_Face() on faces we did not create zombie ft_font_face / ft_unscaled_font mutual referencing problems http://bugs.freedesktop.org/show_bug.cgi?id=21706 Ensure win32 font backend sets the return value to -1 (indicating the absent glyph) if the font index lookup for the unicode character fails. And similarly fix a bug where a fatal error was raised for an invalid glyph. cairo_scaled_font_glyph_extents breaks with invalid glyph id http://bugs.freedesktop.org/show_bug.cgi?id=20255 Various improvements to the documentation, reported by Truc Troung: https://bugs.freedesktop.org/show_bug.cgi?id=20095 https://bugs.freedesktop.org/show_bug.cgi?id=20154 https://bugs.freedesktop.org/show_bug.cgi?id=20180 https://bugs.freedesktop.org/show_bug.cgi?id=20183 https://bugs.freedesktop.org/show_bug.cgi?id=20182 https://bugs.freedesktop.org/show_bug.cgi?id=20441 Release 1.8.6 (2008-12-13 Chris Wilson ) ================================================================== The cairo community is pleased to announce the 1.8.6 release of the cairo graphics library. This is the third update to cairo's stable 1.8 series and contains a small number of bug fixes (in particular a few fixes for failures of cairo 1.8.4 on Quartz and PDF, and build fixes for a couple of backends). This is being released just under a month after cairo 1.8.4. We recommend that everyone using cairo upgrade to 1.8.6. -Chris Build fixes ----------- Fix build of DirectFB backend with debugging enabled: Bug in _cairo_directfb_surface_release_source_image function http://bugs.freedesktop.org/show_bug.cgi?id=18322 Fix build on OS/2. Bug fixes --------- Workaround a mis-compilation of cairo_matrix_invert() that generated invalid matrices and triggered assertion failures later. The issue was reported by Peter Hercek. Invalid computation of the modulus: https://bugzilla.mozilla.org/show_bug.cgi?id=466258 Invalid referencing of patterns in the Quartz backend: Failed assertion `CAIRO_REFERENCE_COUNT_HAS_REFERENCE (&pattern->ref_count)' when using cairo quartz backend http://bugs.freedesktop.org/show_bug.cgi?id=18632 Invalid references to glyphs after early culling, causing segmentation faults in the PDF backend: http://lists.cairographics.org/archives/cairo/2008-December/015976.html Check for XRender in the XCB backend, or else we may attempt an invalid memory access: XCB backend fails with missing render. https://bugs.freedesktop.org/show_bug.cgi?id=18588 Release 1.8.4 (2008-11-14 Carl Worth ) ========================================================= The cairo community is pleased to announce the 1.8.4 release of the cairo graphics library. This is the second update to cairo's stable 1.8 series and contains a small number of bug fixes, (in particular a few fixes for build failures of cairo 1.8.2 on various systems). This is being released just over two weeks after cairo 1.8.2. We recommend that everyone using cairo upgrade to 1.8.4. -Carl Build fixes ----------- Fix build with older XRender that doesn't define RepeatNone: Build of xlib backend fails against old XRender (RepeatNone undeclared) https://bugs.freedesktop.org/show_bug.cgi?id=18385 Fix build with bash version <= 3.0: doltlibtool broken on linux with bash 3.00.0 https://bugs.freedesktop.org/show_bug.cgi?id=18363 Bug fixes --------- Avoid triggering a bug in X.org server 6.9 resulting in a hung machine requiring a reboot: https://bugs.freedesktop.org/show_bug.cgi?id=15628#c2 Fix display of user fonts as exercised by proposed support for type3 fonts in poppler (unsigned promotion fixes): Use cairo user-font for Type 3 fonts http://lists.freedesktop.org/archives/poppler/2008-October/004181.html Avoid miscomputing size of fallback images required when rendering with CLEAR, IN, or SOURCE operator to vector surfaces, (PS, PDF, SVG, etc.). Be more tolerant of broken fonts when subsetting type1 fonts: Error handling in cairo_type1_font_subset_get_glyph_names_and_widths http://lists.cairographics.org/archives/cairo/2008-October/015569.html Fix cairo_fill_extents, cairo_stroke_extents, cairo_path_extents, to correctly allow NULL parameters as documented. Fix potential crash on emitting a type3 glyph after having drawn text paths from the same font, (for example with cairo_text_path). Release 1.8.2 (2008-10-29 Carl Worth ) ========================================================= The cairo community is pleased to announce the 1.8.2 release of the cairo graphics library. This is the first update to cairo's stable 1.8 series and contains a large number of bug fixes. It is being released just over one month since cairo 1.8.0. This release consists primarily of bug fixes, but there is one notable new feature, (the ability to build cairo without an external font backend), and there are a few optimizations as well. See below for details on these changes and the most important bug fixes. While many people have contributed to this release, Chris Wilson deserves particular mention. He has contributed well over twice as many changes to cairo since 1.8.0 than everyone else combined. We greatly appreciate the tremendous efforts of Chris and all cairo contributors. We recommend everyone upgrade to cairo 1.8.2 and hope that everyone will have lots of fun with cairo! -Carl New feature ----------- It is now possible to build cairo without any font backend, (such as freetype, win32 or quartz). This is most useful when the application provides custom font rendering through the user-font API. But in the case where no external font backend is available, and no user-font is provided, cairo will render with a failsafe font, (a stroked font covering visible ASCII character). (Behdad Esfahbod) Optimizations ------------- Dramatically speed up compilation with dolt (removes much of the libtool overhead) (Behdad Esfahbod with thanks to Josh Triplett). Several minor optimizations to tessellator (special-cased comparisons, faster insert for skiplist, etc.) (Chris Wilson). Optimize away fractional translation component when doing EXTEND_NEAREST filtering, (for better performance). General bug fixes ----------------- Allow cloning sub-regions of similar surfaces to fix this bug (Chris Wilson): Crafted gif file will crash firefox [XError: 'BadAlloc (insufficient resources for operation)'] https://bugzilla.mozilla.org/show_bug.cgi?id=424333 Fix some matrix confusion to fix this regression (Chris Wilson): Translucent star exports in a wrong way to PDF https://bugs.launchpad.net/inkscape/+bug/234546 Fix some long-standing bugs with respect to properly computing the extents of transformed, filtered surfaces (Owen Taylor, Carl Worth, and Chris Wilson): Bad clipping with EXTEND_NONE http://bugs.freedesktop.org/show_bug.cgi?id=15349 Improve filtering handling in cairo-pattern.c http://bugs.freedesktop.org/show_bug.cgi?id=15367 Many thanks to Chris Wilson for digging out and cleaning up these fixes. Fix compilation on Solaris 10 (Chris Wilson): Cairo requires -DREENTRANT (along with -D_POSIX_THREAD_SEMANTICS) to compile on Solaris 10 with pthreads https://bugs.freedesktop.org/show_bug.cgi?id=18010 Fix very old bug causing dashes to be rendered at the wrong length in fallback images (Adrian Johnson) Dashed strokes too long in fallback images https://bugs.freedesktop.org/show_bug.cgi?id=9189 Fix broken dashing when a dashed path starts outside the clip region (Chris Wilson). Avoid range overflow when computing large patterns (Benjamin Otte and Chris Wilson). Avoid crashing due to an invalid font with an incorrect entry in its CMAP table (Adrian Johnson). Fix bugs in computing maximum size of text requests that can be sent with the Render extension, (avoiding potential crashes when rendering large amounts of text) (Behdad Esfahbod and Chris Wilson). Fix rendering of operators unbounded by the mask (Chris Wilson). Fix compilation on systems without compiler support for a native 64-bit type (Chris Wilson). Fix several cases of missing error-status propagation. (Chris Wilson, doing the work he seems to never tire of). Fix several locking issues found with the lockdep valgrind skin (Chris Wilson). Backend-specific bug fixes -------------------------- xlib: Avoid crash due to attempting XRender calls on pixmaps with formats not supported by the Render extension (Chris Wilson): XRender crashes due to NULL pointer from Cairo on SGI O2 https://bugs.freedesktop.org/show_bug.cgi?id=11734 xlib: Add support for XImages with depth of 4, 20, 24, or 28 bits (Chris Wilson): cairo doesn't support 24 bits per pixel mode on X11 https://bugs.freedesktop.org/show_bug.cgi?id=9102 xlib: Avoid mistakenly considering two surfaces as similar just because their depths match (while their Render formats do not) (Karl Tomlinson). ps: Fix slight mis-scaling of bitmapped fonts (Adrian Johnson) svg: Correctly emit comp-op for paint, mask, and show_glyphs operations (Emmanuel Pacaud). svg: Use finer-grained fallbacks for SVG 1.2 (as PS and PDF backends have been doing since 1.6.0) (Chris Wilson). win32: Fallback to DIB if DDB create fails for cairo_surface_create_similar (Vladimir Vukicevic). win32: Fix compatibility with Windows Mobile (Vladimir Vukicevic). win32: Fix static builds to not do __declspec(dllimport) on public functions. This requires the user to set a CAIRO_WIN32_STATIC_BUILD environment variable when compiling (Behdad Esfahbod). Release 1.8.0 (2008-09-25 Carl Worth ) ========================================================= The cairo community is happy (and relieved) to announce the 1.8.0 release of the cairo graphics library. This is a major update to cairo, with new features and enhanced functionality which maintains compatibility for applications written using any previous major cairo release, (1.6, 1.4, 1.2, or 1.0). We recommend that anybody using a previous version of cairo upgrade to cairo 1.8.0. The dominant theme of this release is improvements to cairo's ability to handle text. The highlights include a new "user fonts" feature as well as a new cairo_show_text_glyphs API which allows glyphs to be embedded in PDF output along with their original text, (for searching, selection, and copy-and-paste). Another major feature is a revamp of cairo's build system making it much easier to build cairo on various platforms. See below for more details. User fonts ---------- This new API allows the user of cairo API to provide drawings for glyphs in a font. A common use for this is implementing fonts in non-standard formats, like SVG fonts and Flash fonts. This API can also be used by applications to provide custom glyph shapes for fonts while still getting access to cairo's glyph caches. See test/user-font.c and test/user-font-proxy.c for usage examples. This is based on early work by Kristian Høgsberg. Thanks Kristian! This new API consists of the following functions (and corresponding _get functions): cairo_user_font_face_create cairo_user_font_face_set_init_func cairo_user_font_face_set_render_glyph_func cairo_user_font_face_set_text_to_glyphs_func cairo_user_font_face_set_unicode_to_glyph_func An additional, new API is cairo_scaled_font_text_to_glyphs We were previously reluctant to provide this function as text-to-glyphs support in cairo was limited to "toy" font functionality, not really interesting for real-world text processing. However, with user fonts landing, this API is needed to expose full access to how user fonts convert text to glyphs. This is expected to be used by text toolkits like Pango, as well as "proxy" user-font implementations. cairo_show_text_glyphs ---------------------- This new API allows the caller of cairo to provide text data corresponding to glyphs being drawn. The PDF backend implements this new API so that complex text can be copied out of cairo's PDF output correctly and reliably, (assuming the user of cairo calls cairo_show_text_glyphs). The cairo_show_text_glyphs API is definitely the most daunting API to debut in cairo. It is anticipated that pango (and similar high-level text libraries) will be the primary users of this API. In fact, pango 1.22 already uses cairo_show_text_glyphs. Behdad was the architect and implementor of this effort. Thanks, Behdad! The cairo_show_text_glyphs API includes the following new functions: cairo_show_text_glyphs cairo_glyph_allocate cairo_glyph_free cairo_text_cluster_allocate cairo_text_cluster_free cairo_surface_has_show_text_glyphs Build system revamp ------------------- The primary goal of the revamp is to make the build system less fragile, (particularly for non-Linux platforms). For example, now people building on win32 will no longer need to maintain a platform-specific list of files to be built. See the new README.win32 for details. Also, the .so file will now be installed with a different naming scheme, (for example, 1.7.6 will install with a .10800 suffix). Many thanks to Behdad and his small army of helpers! Assorted API additions ---------------------- For API completeness, several missing "getter" functions were added: cairo_scaled_font_get_scale_matrix cairo_surface_get_fallback_resolution cairo_toy_font_face_create cairo_toy_font_face_get_family cairo_toy_font_face_get_slant cairo_toy_font_face_get_weight The new cairo_toy_font_face functions provide access to functionality and settings provided by cairo_select_font_face(). Thanks Behdad! cairo-ps/cairo-pdf: More efficient output ----------------------------------------- Adrian Johnson has been busy fixing all kinds of bugs in PS and PDF backends, as well making them generate much more compact output by avoiding things like re-emitting the color or linestyle on every drawing operation. Thanks Adrian! cairo-xlib: dithering --------------------- Dithering: Cairo now does simple dithering when rendering to legacy X servers. This is most visible with 8-bit visuals. Thanks Behdad! cairo-xlib: Avoid rendering glyphs out of surface bounds -------------------------------------------------------- This seemingly harmless optimization exposed a bug in OpenOffice.org 3 versions where OO.o was passing bogus surface extents to cairo, resulting in no text rendered in OO.o. Please contact your distribution's OO.o maintainers if you see this bug and point them to the following URL: https://bugs.freedesktop.org/show_bug.cgi?id=16209 cairo-xlib: Improved performance with X server without Render ------------------------------------------------------------- Cairo now performs better on remote X servers that lack the Render extension by being smarter about using X core protocol facilities instead of falling back to doing all rendering on the client side. cairo-ft: respecting FC_FT_FACE ------------------------------- Previously it was impossible to instruct cairo to do emboldening on a font face object created from an FT_Face. Cairo now respects and uses the FC_FT_FACE fontconfig pattern element, so emboldening can be achieved by using cairo_ft_font_face_create_for_pattern() and a carefully crafted pattern using FC_FT_FACE and FC_EMBOLDEN. Thanks Behdad! cairo-directfb: backend improvements ------------------------------------ The directfb backend, though still unsupported, has seen a good deal of improvements. Thanks Vlad! Bug fixing and optimizations ---------------------------- xlib: Faster bookkeeping (Karl Tomlinson) https://bugzilla.mozilla.org/show_bug.cgi?id=453199#c5 PS: Fix gradients with non-constant alpha (Chris Wilson) Fix deadlock in user-font code (Richard Hughes and Behdad Esfahbod) http://bugs.freedesktop.org/show_bug.cgi?id=16819 Countless other bugs have been fixed and optimizations made, many of them thanks to Chris Wilson. Thanks Chris and others! Note also that the code that had been in cairo 1.7.x calling into freetype's optional lcd_filter function was removed from cairo before the 1.8.0 release. We do expect this code to come back in some form in the future. Snapshot 1.7.6 (2008-09-17 Carl Worth ) ========================================================== The cairo community is happy to announce the 1.7.6 snapshot of the cairo graphics library. This is a "release candidate" for the upcoming 1.8.0 release, so we will greatly appreciate any reports of problems in this release, and no major changes are currently planned before 1.8. Notable changes in 1.7.6 ------------------------ The largest number of changes since 1.7.4 did not change the implementation of cairo itself, but instead revamped cairo's build system. The primary goal of the revamp is to make the build system less fragile, (particularly for non-Linux platforms). For example, now people building on win32 will no longer need to maintain a platform-specific list of files to be built. Also, the .so file will now be installed with a different naming scheme, (for example, 1.7.6 will install with a .10706 suffix). Much thanks, Behdad! And, as usual, Chris Wilson has made another large round of robustness improvements, (eliminating dead code, fixing propagation of error status values, test suite improvements, etc. etc.). Thanks as always, Chris! API changes since 1.7.4 ----------------------- There have been a few changes of API that was new during the 1.7 series: * Remove cairo_font_options_set_lcd_filter and cairo_font_options_get_lcd_filter Motivation: At the Cairo Summit, this API was determined to be too specific to the freetype font backend to be in the general API. A similar API with a cairo_ft prefix might be introduced in the future. Note that cairo will still respect the corresponding fontconfig settings for these options. * Replace cairo_has_show_glyphs with cairo_surface_has_show_glyphs Motivation: This really is a surface-specific interface, and the convenience function on the cairo_t is not obviously necessary. An application can easily call: cairo_surface_has_show_glyphs (cairo_get_target (cr)); as needed. * Add cairo_text_cluster_flags_t to cairo_show_text_glyphs cairo_scaled_font_text_to_glyphs cairo_user_scaled_font_text_to_glyphs_func_t Motivation: This flag, (and specifically the CAIRO_TEXT_CLUSTER_FLAG_BACKWARD value), replaces the cairo_bool_t backward argument in each of the above interfaces. This leads to more readable user code, and also allows future extensibility. As always, there are no changes to any API from any major cairo release, (1.0.x, 1.2.x, 1.4.x, 1.6.x). Cairo maintains the same compatibility promise it always has. Bug fixes since 1.7.4 --------------------- xlib: Faster bookkeeping (Karl Tomlinson) https://bugzilla.mozilla.org/show_bug.cgi?id=453199#c5 PS: Fix gradients with non-constant alpha (Chris Wilson) Fix deadlock in user-font code (Richard Hughes and Behdad Esfahbod) http://bugs.freedesktop.org/show_bug.cgi?id=16819 Several other minor fixes. Snapshot 1.7.4 (2008-08-11 Behdad Esfahbod ) =============================================================== The cairo community is embarrassed to announce availability of the 1.7.4 snapshot of the cairo graphics library. This is a followup release to the 1.7.2 snapshot to ship a tarball that can actually be built. The only change since 1.7.4 is including the missing header file cairo-user-font-private.h in the distribution. Snapshot 1.7.2 (2008-08-11 Behdad Esfahbod ) =============================================================== The cairo community is finally ready to announce availability of the 1.7.2 snapshot of the cairo graphics library. This is embarrassingly the first snapshot in the 1.7 unstable series of cairo, leading to the eventual release of cairo 1.8, currently planned for late September. This snapshot comes four months after the 1.6.4 release. We have done a really bad job on getting development snapshots out this cycle, but hopefully all the API changes for 1.8 are now finished and the remaining weeks will be spent on bug-fixing. There is more than 400 commits worth of changes in this snapshot, and those can use some testing. Read on! Text, text, and more text! -------------------------- The dominant theme of this release, and 1.8 in general, is improvements around cairo text API. Here is a high-level list of changes with text handling: User fonts ---------- This is new API allowing the user of cairo API to provide drawings for glyphs in a font. This is most useful in implementing fonts in non-standard formats, like SVG fonts and Flash fonts, but can also be used by games and other applications to draw "funky" fonts. See test/user-font.c and test/user-font-proxy.c for usage examples. This is based on early work by Kristian Høgsberg. Thanks Kristian! show_text_glyphs ---------------- This new API allows the caller of cairo to mark text glyphs with their original text. The PDF backend implements this new API and latest Pango master uses it. The result is (when bugs are fixed) that complex text can be copied out of pangocairo's PDF output correctly and reliably. There are bugs to fix though. A few poppler bugs, and some more in cairo and pango. To test show_text_glyph, just grab pango master and this cairo snapshot and print text in gedit. Open in acroread or evince, select all, copy, paste in gedit and compare. The Arabic text with diacritic marks is particularly showing bad. Try with pango/pango-view/HELLO.txt if you are brave enough. The Indic text is showing improvements, but is still coming out buggy. LCD subpixel filtering using FreeType ------------------------------------- FreeType 2.3.5 added support for various LCD subpixel filtering, and fontconfig 2.6.0 added support for configuring LCD filter on a font by font basis. Cairo now relies on FreeType and fontconfig for subpixel filtering. This work is based on David Turner's original patch to cairo, maintained and tested by Sylvain Pasche and others. Thanks all! Toy font face constructor and getter ------------------------------------ Mostly for API completion, but also useful for higher level (like Pango) to hook into what the user has set using cairo_select_font_face(), making that toy API a bit more useful. FreeType: respecting FC_FT_FACE ------------------------------- Previously it was impossible to instruct cairo to do emboldening on a font face object created from an FT_Face. Cairo now respects and uses the FC_FT_FACE fontconfig pattern element, so emboldening can be achieved by using cairo_ft_font_face_create_for_pattern() and a carefully crafted pattern using FC_FT_FACE and FC_EMBOLDEN. PS/PDF: More efficient output ----------------------------- Adrian Johnson has been busy fixing all kinds of bugs in PS and PDF backends, as well making them generate much more compact output by avoiding things like re-emitting the color or linestyle on every drawing operation. Thanks Adrian! Xlib: Dithering --------------- Cairo now does simple dithering when rendering to legacy X servers. This is mostly visible with 8-bit visuals. Xlib: Avoid rendering glyphs out of surface bounds -------------------------------------------------- This seemingly harmless change manifested a bug with OpenOffice.org 3 versions where OO.o was passing bogus surface extents to cairo, resulting in no text rendered in OO.o. Please contact your distro's OO.o maintainers if you see this bug and point them to the following URL: https://bugs.freedesktop.org/show_bug.cgi?id=16209 Xlib: Improved performance with Xrender-less X servers ------------------------------------------------------ Cairo now performs better on remote, Xrender-less X servers by being smarter about using X core protocol facilities instead of falling back to doing all rendering on the client side. Directfb: backend improvements ------------------------------ The directfb backend, though still unsupported, has seen a good deal of improvements. Thanks Vlad! Bug fixing and optimizations ---------------------------- Countless bugs have been fixed and optimizations made, many of them thanks to Chris Wilson. Thanks Chris! API additions ------------- cairo_show_text_glyphs This is a new text rendering API. Being a more advanced version of cairo_show_glyphs(), it is aimed for use by higher-level text toolkits like Pango, and enables better text extraction from output generated by backends like PDF and SVG. The PDF backend already implements it, and the upcoming Pango release will use it. To make that API work, a bunch of other additions were made: cairo_glyph_allocate cairo_glyph_free cairo_text_cluster_t cairo_text_cluster_allocate cairo_text_cluster_free cairo_surface_has_show_text_glyphs cairo_user_font_face_create This is the "user" font face constructor, accompanied by a variety of method signatures, getters, and setters for a callback-based font backend: CAIRO_FONT_TYPE_USER cairo_user_scaled_font_init_func_t cairo_user_scaled_font_render_glyph_func_t cairo_user_scaled_font_text_to_glyphs_func_t cairo_user_scaled_font_unicode_to_glyph_func_t cairo_user_font_face_set_init_func cairo_user_font_face_set_render_glyph_func cairo_user_font_face_set_text_to_glyphs_func cairo_user_font_face_set_unicode_to_glyph_func cairo_user_font_face_get_init_func cairo_user_font_face_get_render_glyph_func cairo_user_font_face_get_text_to_glyphs_func cairo_user_font_face_get_unicode_to_glyph_func cairo_scaled_font_text_to_glyphs We were previously reluctant to provide this function as text-to-glyphs support in cairo was limited to "toy" font functionality, not really interesting for real-world text processing. However, with user-fonts landing, this API is needed to expose full access to how user-fonts convert text to glyphs. This is expected to be used by text toolkits like Pango, as well as "proxy" user-font implementations. cairo_lcd_filter_t cairo_font_options_set_lcd_filter cairo_font_options_get_lcd_filter These add the possibility to choose between various available LCD subpixel filters. The available filter values are modeled after what FreeType provides. cairo_toy_font_face_create cairo_toy_font_face_get_family cairo_toy_font_face_get_slant cairo_toy_font_face_get_weight These provide access to functionality and settings provided by cairo_select_font_face(). cairo_scaled_font_get_scale_matrix cairo_surface_get_fallback_resolution For API completeness. Various new values for cairo_status_t enum Known issues: - Type3 fonts generated by cairo's PDF backend may show up in poppler/Evince in a different color than expected. This is fixed in poppler master branch. This mostly affects cairo user fonts. The test case test/user-font.c demonstrates this. - User fonts using other fonts in their rendering are currently embedded in PDF as fallback bitmap glyphs. This will be (hopefully) fixed before 1.8. The test case test/user-font-proxy.c demonstrates this. Release 1.6.4 (2008-04-11 Carl Worth ) ========================================================= The cairo community is wildly embarrassed to announce the 1.6.4 release of the cairo graphics library. This release reverts the xlib locking change introduced in 1.6.4, (and the application crashes that it caused). The community would be glad to sack its current release manager and is accepting applications for someone who could do the job with more discipline. Revert 'add missing locking in cairo-xlib' ------------------------------------------ This change was introduced in cairo 1.6.2, but also introduced a bug which causes many cairo-xlib applications to crash, (with a segmentation fault inside of XSetClipMask). Instead of attempting another fix for the broken fix, the change in 1.6.2 has been reverted. The original bug which the change was addressing has been present since at least cairo 1.4, so it is not expected that leaving this bug unfixed will cause any new problems for applications moving from cairo 1.4 to cairo 1.6. At this point, the code of cairo 1.6.4 differs from cairo 1.6.0 only in the fix for the PostScript-printer crashes. Tweak build to avoid linking with g++ ------------------------------------- Cairo 1.6.4 avoids a quirk in automake that was causing the cairo library to be linked with g++ and linked against libstdc++ even when only C source files were compiled for the library. Release 1.6.2 (2008-04-11 Carl Worth ) ========================================================= The cairo community is pleased (but somewhat sheepish) to announce the 1.6.2 release of the cairo graphics library. This is an update to yesterday's 1.6.0 release with an important fix to prevent cairo's PostScript output from crashing some printers. This release also includes a locking fix for cairo's xlib backend to improve thread safety. There are no changes beyond these two fixes. Fix for PostScript printer crash -------------------------------- Adrian Johnson discovered that cairo 1.6.0 was being a bit hard on PostScript printers, by changing the font matrix very frequently. This causes some PostScript interpreters to allocate new font objects every few glyphs, eventually exhausting available resources. The fix involves leaving translational components of the font matrix as zero, so that the PostScript interpreter sees an identical font matrix repeatedly, and can more easily share internal font object resources. This fix has been tested to resolve the bugs posted here, (for both Xerox and Dell printers): Printing some PDFs from evince is crashing our Xerox printer http://bugs.freedesktop.org/show_bug.cgi?id=15348 Cairo-generated postscript blocks Dell 5100cn http://bugs.freedesktop.org/show_bug.cgi?id=15445 Add missing locking in cairo-xlib --------------------------------- Chris Wilson noticed that cairo 1.6.0 was manipulating an internal cache of GC object within cairo's Xlib backend without proper locking. The missing locking could cause failures for multi-threaded applications. He fixed this in 1.6.2 by adding the missing locks. Release 1.6.0 (2008-04-10 Carl Worth ) ========================================================= The cairo community is quite pleased to announce the 1.6.0 release of the cairo graphics library. This is a major update to cairo, with new features and enhanced functionality which maintains compatibility for applications written using cairo 1.4, 1.2, or 1.0. We recommend that anybody using a previous version of cairo upgrade to cairo 1.6.0. The most significant new features in this release are dramatically improved PDF and PostScript[*] output, support for arbitrary X server visuals (including PseudoColor), a new Quartz backend, and and a new "win32 printing" backend. See below for more details on these and other new features. New dependency on external pixman library (Thanks, Søren!) ---------------------------------------------------------- As of cairo 1.6, cairo now depends on the pixman library, for which the latest release can be obtained alongside cairo: http://cairographics.org/releases/pixman-0.10.0.tar.gz This library provides all software rendering for cairo, (the implementation of the image backend as well as any image fallbacks required for other backends). This is the same code that was previously included as part of cairo itself, but is now an external library so that it can be shared by both cairo and by the X server, (which is where the code originated). Improved PDF, PostScript, and SVG output (Thanks, Adrian!) ---------------------------------------------------------- Users of the cairo-pdf, cairo-ps, and cairo-svg should see a dramatic improvement from cairo 1.2/1.4 to 1.6. With this release there are now almost no operations that will result in unnecessary rasterization in the PDF and PostScript. Rasterized "image fallbacks" are restricted only to minimal portions of the document where something is being drawn with cairo that is beyond the native capabilities of the document, (this is rare for PDF or SVG, but occurs when blending translucent objects for PostScript). This means that the final output will be of higher quality, and will also be much smaller, and therefore will print more quickly. The machinery for doing analysis and minimal fallbacks also benefits the win32-printing surface described below. In addition to doing less rasterization, the PostScript and PDF output also has several other improvements to make the output more efficient and more compatible with specifications. [*] Note: Just before this release, a bug has been reported that the PostScript output from cairo can crash some printers, (so far the following models have been reported as problematic Xerox Workcentre 7228 or 7328 and Dell 5100cn). We will implement a workaround as soon as we can learn exactly what in cairo's output these printers object to, (and we could use help from users that have access to misbehaving printers). This bug is being tracked here: Printing some PDFs from evince is crashing our Xerox printer http://bugs.freedesktop.org/show_bug.cgi?id=15348 New support for arbitrary X server visuals (Thanks, Keith and Behdad!) ---------------------------------------------------------------------- As of cairo 1.6, cairo should now work with an arbitrary TrueColor or 8-bit PseudoColor X server visual. Previous versions of cairo did not support these X servers and refused to draw anything. We're pleased to announce that this limitation has been lifted and people stuck with ancient display systems need no longer be stuck with ancient software just because of cairo. New, supported Quartz backend for Mac OS X (Thanks, Brian and Vladimir!) ------------------------------------------------------------------------ As of cairo 1.6, the cairo-quartz backend is now marked as "supported" rather than "experimental" as in previous cairo releases. Its API now has guarantees of API stability into future cairo releases, and its output quality is comparable to other backends. There have been significant improvements to cairo-quartz since 1.4. It now uses many fewer image fallbacks, (meaning better performance), and has greatly improved text rendering. New, "win32 printing" backend (Thanks, Adrian and Vladimir!) ------------------------------------------------------------ A new win32-printing surface has been added with an interface very similar to the original win32 surface, (both accept an HDC parameter). But this new surface should only be called with a printing DC, and will result in all drawing commands being stored into a meta-surface and emitted after each page is complete. This allows cairo to analyze the contents, (as it does with PDF, PostScript, and SVG backends), and to do minimal image-based fallbacks as necessary. The analysis keeps things as efficient as possible, while the presence of fallbacks, (when necessary), ensure the consistent, high-quality output expected from cairo. Robustness fixes (Thanks, Chris!) --------------------------------- There has been a tremendous number of improvements to cairo's robustness. Areas that have been improved include: * Proper reporting of errors * Responding correctly to invalid input * Avoiding integer overflows * Avoiding memory leaks on error-recovery paths * Making reference counting thread safe * Exhaustive testing of memory allocation points Other fixes (Thanks, everybody!) -------------------------------- Cairo's internal fixed-point representation has been changed from 16.16 to 24.8. This has a direct impact on applications as it allows much larger objects to be drawn before internal limits in cairo make the drawing not work. The CAIRO_EXTEND_PAD mode is now fully supported by surface patterns. This mode allows applications to use cairo_rectangle and cairo_fill to draw scaled images with high-quality bilinear filtering for the internal of the image, but without any objectionably blurry edges, (as would happen with the default EXTEND_NONE and cairo_paint). Rendering with CAIRO_ANTIALIAS_NONE has been fixed to be more predictable, (previously image rendering and geometry rendering would be slightly misaligned with respect to each other). The reference manual at http://cairographics.org/manual now documents 100% of the functions and types in cairo's public API. API additions ------------- Several small features have been added to cairo with new API functions: cairo_format_stride_for_width Must be called to compute a properly aligned stride value before calling cairo_image_surface_create_for_data. cairo_has_current_point Allows querying if there is a current point defined for the current path. cairo_path_extents Allows querying for path extents, (independent of any fill or stroke parameters). cairo_surface_copy_page cairo_surface_show_page Allow beginning a new document page without requiring a cairo_t object. cairo_ps_surface_restrict_to_level cairo_ps_get_levels cairo_ps_level_to_string cairo_ps_surface_set_eps Allow controlling the Post PostScript level, (2 or 3), to target, as well as to generate Encapsulated PostScript (EPS). cairo_quartz_font_face_create_for_cgfont Create a quartz-specific cairo_font_face_t from a CGFontRef. cairo_win32_font_face_create_for_logfontw_hfont Create a win32-specific cairo_font_face from a LOGFONTW and an HFONT together. Thanks, Everyone! ----------------- I've accounted for 32 distinct people with attributed code added to cairo between 1.4.14 and 1.6.0, (their names are below). That's an impressive number, but there are certainly dozens more that contributed with testing, suggestions, clarifying questions, and encouragement. I'm grateful for the friendships that have developed as we have worked on cairo together. Thanks to everyone for making this all so much fun! Adrian Johnson, Alp Toker, Antoine Azar, Behdad Esfahbod, Benjamin Otte, Bernardo Innocenti, Bertram Felgenhauer, Boying Lu, Brian Ewins, Carl Worth, Chris Heath, Chris Wilson, Claudio Ciccani, Emmanuel Pacaud, Jeff Muizelaar, Jeremy Huddleston, Jim Meyering, Jinghua Luo, Jody Goldberg, Jonathan Gramain, Keith Packard, Ken Herron, Kouhei Sutou, Kristian Høgsberg, Larry Ewing, Martin Ejdestig, Nis Martensen, Peter Weilbacher, Richard Hult, Shailendra Jain, Søren Sandmann Pedersen, Vladimir Vukicevic Snapshot 1.5.20 (2008-04-04 Carl Worth ) =========================================================== This is the tenth snapshot in cairo's unstable 1.5 series. It comes just two days (and only one working day) after the 1.5.18 snapshot. The quick snapshot is due to two embarrassing bugs (both affecting cairo-xlib) that had been introduced in the 1.5.18 snapshot. The fixes for these are described below along with a few other fixes, (which hopefully aren't introducing new bugs this time). cairo-xlib ---------- Revert fix from 1.5.18 to allow pattern expansion based on the filter mode. This fix seemed so boring, (the use case it addresses is almost never used in practice), that it didn't even get mentioned in the 1.5.18 release notes. However, the "fix" happened to break rendering that is always used resulting in corrupt image rendering in mozilla, evolution, and probably everything else that uses cairo. Fix to avoid BadMatch errors in cairo_surface_create_similar. These were introduced, (inadvertently, of course), as part of the fix in 1.5.18 for creating similar surfaces without the Render extension. Again, thanks to mozilla, (and Vladimir Vukicevic in particular), for noticing our mistake. general ------- Correctly handle an in-error surface in cairo_surface_write_to_png. Previously this function would cause an assertion failure if you gave it a finished surface. Now it cleanly returns a CAIRO_STATUS_SURFACE_FINISHED result instead. Avoid potentially infinite wandering through memory inside _cairo_hull_prev_valid. Thanks to Jonathan Watt for noticing this problem: https://bugzilla.mozilla.org/show_bug.cgi?id=306649#c21 cairo-pdf --------- Fix generation of "soft" masks made by drawing to a similar surface and then calling cairo_mask_surface() with it. cairo-svg --------- Fix for code that uses cairo_mask() on an intermediate surface which is later passed to cairo_mask_surface(). Snapshot 1.5.18 (2008-04-05 Carl Worth ) =========================================================== This is the ninth snapshot in cairo's unstable 1.5 series. It comes just 4 days after the 1.5.16 snapshot. We had hoped to not need another snapshot before the final 1.6.0 release, but several critical bugs were found and fixed in the last few days, so we thought it important to let people test the fixes with this snapshot. See below for details. documentation ------------- The README now lists necessary dependencies. Various graphics state defaults are now documented, (source pattern is opaque black, line width is 2.0, line join is miter, line cap is butt, miter limit is 10.0, etc.). general ------- Several cleanups have been made along many error-path returns, (carefully propagating up the original error status values, cleaning up memory leaks during error recovery, etc.). This is yet another in Chris "ickle" Wilson's long series of error-handling cleanups during the 1.5 series. Avoid undesired clipping when drawing scaled surface patterns with bilinear filtering. cairo-pdf --------- Fix emission of 1-bit alpha masks in PDF output. Fix a bug that would cause glyphs to be misplaced along the Y axis: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=%23474136 Originally, an issue about a crash, but later leading to the misplaced glyphs issue being discovered. cairo-ps -------- Fix misplaced glyphs in cairo's PostScript output. This issue occurs when consecutive glyphs are placed far apart. This case is exercised by the new ft-show-glyphs-table test case, which was originally inspired by the Debian bug #23474136 mentioned above. Fix more misplaced glyphs in cairo's PostScript output: The issue here showed up under very particular circumstance, (when converting a PDF file with a CFF font with CID Identity-H encoding and using glyph 0, (defined by the CFF specification as .notdef) as a space instead). More concretely, this problem appeared when converting the UbuntuDesktop.pdf file mentioned in this bug report: https://bugs.freedesktop.org/show_bug.cgi?id=15348#c3 As usual with arcane font-encoding-specific bugs like this, many thanks to Adrian Johnson for his magical ability to dive into specifications and emerge almost instantaneously with fixes. And thanks to Sebastien Bacher for bringing the bug to our attention. cairo-xlib ---------- Fix serious failure on X servers without the Render extension. Since the 1.5.14 snapshot (with support for PseudoColor visuals), any application attempting to create a "similar" xlib surface would fail on an X server without the Render extension. Thanks to Frederic Crozat for pointing out that cairo's test suite was entirely failing when run against Xvfb. Avoid crashing cairo-xlib applications for too-large glyphs Naively sending glyphs of any size to the X server will eventually violate the X limit on maximum request sizes. We now properly detect when a glyph would be too large and use existing fallbacks to render the glyph rather than trying to send it to the X server. Enable the buggy_repeat workaround for Xorg servers < 1.4 We have determined that Xorg 1.3.0 (as packaged in Fedora 8 at least) has a bug that can result in an X server crash when cairo uses certain X Render repeat operations, (as exercised by cairo's extend-reflect test). We avoid this crash by using fallbacks whenever a repeating surface is needed for any Xorg server with a version less than 1.4. This is slower, but should prevent the crash. (Meanwhile, there appears to be a separate bug where some X servers or specific X-server drivers will use random pixmap data when asked to draw a repeating surface. The buggy_repeat workaround would also avoid those problems, but we have not yet characterized whether the new "version < 1.4" is a good characterization of those problems or not.) cairo-quartz-font ----------------- Implement cairo_font_extents for this backend. The cairo-quartz-font implementation added in the 1.5.14 snapshot was entirely missing support for the cairo_font_extents function. Thanks to Richard Hult for pointing out this obvious shortcoming, (and obvious lack of coverage in our test suite): CGFont backend returns 0 font extents https://bugs.freedesktop.org/show_bug.cgi?id=15319 Snapshot 1.5.16 (2008-04-01 Carl Worth ) =========================================================== This is the eighth snapshot in cairo's unstable 1.5 series. It comes less than two weeks after the 1.5.14 snapshot and it really is a legitimate snapshot, (in spite of sharing this date with that of many bogus announcements). The major change in this snapshot is that the cairo-quartz backend is now officially "supported", including new API to construct a font face from a CGFontRef . Also several bug fixes have been fixed in many backends. See below for details. general ------- Cairo now depends on pixman 0.10.0 which was recently released. The latest pixman release can always be found alongside cairo releases at: http://cairographics.org/releases Increase the precision of color stops for gradients. This fixes a regression in gradient rendering that had been present since the 1.5.12 snapshot. paginated (all of ps, pdf, svg, and win32-printing) --------------------------------------------------- Fix assertion failure when some drawing elements are outside the page boundaries, (this bug was noticed when using Inkscape to print a drawing with landscape orientation to a portrait-oriented piece of paper). cairo-ps -------- Fix of bug causing incorrect glyph positioning. Fix handling of CAIRO_OPERATOR_SOURCE. cairo-pdf --------- More reduction of unnecessary digits of precision in PDF output. Fix handling of CAIRO_OPERATOR_SOURCE. cairo-svg --------- Fix bug in usage of libpng that was preventing cairo_mask from working with the svg backend. Fix transformation of source pattern for cairo_stroke(). cairo-win32-printing -------------------- Fix fallback resolution, (thanks again to inkscape users/developers for helping us find this one). cairo-quartz ------------ Mark the cairo-quartz backend as "supported" rather than "experimental". This means the following: * The backend will now be built by default (if possible). * We are committing that the backend-specific API (as published in cairo-quartz.h) are stable and will be supported in all future cairo 1.x releases. * We are committing that the output quality of this backend compares favorably with other cairo backends, (and that quality is ensured by good results from the cairo test suite). * We recommend that distributions build and distribute this backend when possible. Note that the cairo_quartz_image API (in cairo-quartz-image.h) is still experimental, will not build by default, (pass --enable-quartz-image to configure to build it), and may see API changes before it is marked as "supported" in a future release. Put the CAIRO_FONT_TYPE_ATSUI name back into cairo-deprecated.h. Without this, the cairo 1.5.14 snapshot broke all builds for applications using the C++ cairomm bindings (and perhaps others) which have the CAIRO_FONT_TYPE_ATSUI name in their header files. This breakage happened even for applications not using cairo-quartz at all. Note: Even though the CAIRO_FONT_TYPE_ATSUI name is provided to avoid this build breakage, we still recommend that bindings and applications move to the new, and more accurate, CAIRO_FONT_TYPE_QUARTZ name. Replace the implementation of cairo-quartz-font to use CFFont instead of ATSUI. The CGFont API is a better fit than ATSUI, and this new implementation is also more correct than the old one as well. This also adds the following new API call: cairo_public cairo_font_face_t * cairo_quartz_font_face_create_for_cgfont (CGFontRef font); The previous cairo_quartz_font_face_create_for_atsu_font_id function continues to exist and is part of the supported API going forward. (However, the old name of that same function, which was cairo_atsui_font_face_create_for_atsu_font_id is officially deprecated. Any source code using the old name should be updated to use the new name.) Fix transformation of source pattern for cairo_stroke(). cairo-win32 ----------- Avoid crash in create_similar is cairo_win32_surface_create fails. Snapshot 1.5.14 (2008-03-20 Carl Worth ) =========================================================== This is the seventh snapshot in cairo's unstable 1.5 series. It comes 3 weeks after the 1.5.12 snapshot. This snapshot includes support for arbitrary X server visuals, (including PseudoColor), which was the final remaining cairo-specific item on the cairo 1.6 roadmap. It also includes a huge number of improvements to the cairo-quartz backend. So this is effectively a cairo 1.6 release candidate. We expect very few changes from now until 1.6 and only for specific bug fixes. API Change ---------- Rename ATSUI font backend to Quartz font backend. This affects the following usage: --enable-atsui -> --enable-quartz-font CAIRO_HAS_ATSUI_FONT -> CAIRO_HAS_QUARTZ_FONT CAIRO_FONT_TYPE_ATSUI -> CAIRO_FONT_TYPE_QUARTZ cairo_atsui_font_face_create_for_atsu_font_id -> cairo_quartz_font_font_create_for_atsu_font_id This API change is justified by the cairo-quartz backend still be marked as "experimental" rather than "supported", (though this is one step toward making the change to "supported" before 1.6). Cairo will still provide ABI compatibility with the old symbol name, however. paginated (all of ps, pdf, svg, and win32-printing) --------------------------------------------------- Optimize by not analyzing an image surface for transparency more than once, (previously all images were analyzed twice). cairo-ps and cairo-pdf ---------------------- Avoiding emitting a matrix into the stroke output when unnecessary, (making output size more efficient). Reduce rounding error of path shapes by factoring large scale factors out of the path matrix, (ensuring that a fixed-number of printed digits for path coordinates contains as much information as possible). Reduce excess digits for text position coordinates. This makes the output file size much smaller without making the result any less correct. cairo-ps -------- Eliminate bug causing extraneous text repetition on Linux PostScript output in some cases. See: Mozilla Bug 419917 – Printed page contents are reflected inside bordered tables (Linux-only) https://bugzilla.mozilla.org/show_bug.cgi?id=419917 Optimize output when EXTEND_PAD is used. cairo-pdf --------- Fix to not use fill-stroke operator with transparent fill, (else PDF output doesn't match the cairo-defined correct result). See: https://bugs.launchpad.net/inkscape/+bug/202096 cairo-svg --------- Fix stroke of path with a non-solid-color source pattern: http://bugs.freedesktop.org/show_bug.cgi?id=14556 cairo-quartz ------------ Fix text rendering with gradient or image source pattern. Handling antialiasing correctly for cairo_stroke(), cairo_clip(), and cairo_show_text()/cairo_show_glyphs(). Correctly handle gradients with non-identity transformations: Fixes http://bugs.freedesktop.org/show_bug.cgi?id=14248 Add native implementation of REPEAT and REFLECT extend modes for gradients. Fix implementation for the "unbounded" operators, (CAIRO_OPERATOR_OUT, _IN, _DEST_IN, and _DEST_ATOP). Correctly handle endiannees in multi-architecture compiles on Mac OS X. Avoid behavior which would cause Core Graphics to print warnings to the console in some cases. cairo-win32 ----------- Fix handling of miter limit. cairo-win32-printing -------------------- Fix to not use a 1bpp temporary surface in some cases while printing, (so grayscale data is preserved rather than just becoming black and white). cairo-xlib ---------- Add support for rendering to arbitrary TrueColor X server visuals. This fixes at least the following bugs: cairo doesn't support 8-bit truecolor visuals https://bugs.freedesktop.org/show_bug.cgi?id=7735 cairo doesn't support 655 xlib format https://bugs.freedesktop.org/show_bug.cgi?id=9719 Add support for rendering to 8-bit PseudoColor X server visuals. This fixes the following bug: Cairo doesn't support 8-bit pseudocolor visuals https://bugs.freedesktop.org/show_bug.cgi?id=4945 Snapshot 1.5.12 (2008-02-28 Carl Worth ) =========================================================== This is the sixth snapshot in cairo's unstable 1.5 series. It comes 1 week after the 1.5.10 snapshot. This snapshot includes the long-awaited change from 16.16 to 24.8 fixed-point values, (see below for why you should care). It also includes several backend-specific bug fixes. 24.8 fixed-point format ----------------------- Cairo has always converted path coordinates to a fixed-point representation very early in its processing. Historically, this has been a 32-bit representation with 16 bits of integer for the device-pixel grid and 16 bits of sub-pixel positioning. The choice of 16 bits for the integer coordinate space was based on the 16-bit limit for X Window drawables. This 16-bit limit has proven problematic for many applications. It's an especially vexing problem when targeting non-X backends that don't have any 16-bit restriction. But even when targeting cairo-xlib, it's often desirable to draw a large shape, (say a background rectangle), that extends beyond the surface bounds and expect it to fill the surface completely, (rather than overflowing and triggering random behavior). Meanwhile, nobody has ever really needed 16 bits of sub-pixel precision. With this snapshot, the fixed-point system is still in place and is still using a 32-bit representation, (future versions of cairo might move entirely to floating-point when targeting PDF output for example). But the representation now provides 24 bits of pixel addressing and only 8 bits of sub-pixel positioning. This should give a much less stifling space to many applications. However, the underlying pixman library still has 16-bit limitations in many places, (it has its roots in the X server as well). Until those are also fixed, applications targeting cairo image surfaces, or hitting software fallbacks when targeting other surfaces will still encounter problems with device-space values needing more than 16 integer bits. generic fixes ------------- Add a few tests to the test suite to increase coverage. Cleanup a few error-handling paths, (propagate error correctly). cairo-ft -------- Fix handling of font sizes smaller than 1 device pixel. cairo-pdf --------- Fix to properly save/restore clip when analyzing meta-surface patterns, (fixing a couple of test-suite failures). Implement native support for CAIRO_OPERATOR_SOURCE when the source pattern is opaque. Emit rectangles as PDF rectangles ("re" operator) rather than as general paths. cairo-ps -------- Fix to work properly with the 16.16->24.8 change. cairo-svg --------- Fix CAIRO_EXTEND_REFLECT by using an image fallback, (there's no direct SVG support for reflected patterns). Fix the use of alpha-only masks, (such as CAIRO_FORMAT_A8). cairo-quartz ------------ Add new API for efficiently using image data as a source: cairo_surface_t * cairo_quartz_image_surface_create (cairo_surface_t *image_surface); cairo_surface_t * cairo_quartz_image_surface_get_image (cairo_surface_t *surface); For full documentation, see: http://cairographics.org/manual/cairo-Quartz-Surfaces.html#cairo-quartz-image-surface-create Several fixes for cairo_mask(). cairo-atsui ----------- Change default from from Monaco to Helvetica to be more consistent with other font backends. Snapshot 1.5.10 (2008-02-20 Carl Worth ) =========================================================== This is the fifth snapshot in cairo's unstable 1.5 series. It comes 3 weeks after the 1.5.8 snapshot. This snapshot adds one new API function, (cairo_has_current_point), and the usual mix of improvements, (more efficient PostScript/PDF output, optimized stroking), and fixes (more robust error-handling, etc.). See below for details. New API ------- Add a new function to query if there is a current point: cairo_bool_t cairo_has_current_point (cairo_t *cr); There is no current point immediately after cairo_create(), nor after cairo_new_path() or cairo_new_sub_path(). There is a current point after any of the path-creation functions, (cairo_move_to, cairo_line_to, cairo_curve_to, etc.). With this new function, we also revert the change of the return type of cairo_get_current_point from cairo 1.5.8, (it's now a void function again). Optimizations ------------- Optimize stroking code to avoid repeated calculation of redundant values, (particularly significant for very large, offscreen paths). General fixes ------------- Patch a few more potential buffer overruns, (due to integer overflow). Many fixes and improvements to cairo's error-handling, (ensure that correct error values are returned, clean up memory leaks on error-handling paths, etc.). Fix a potential infinite loop when stroking a spline with a pen that has been transformed to a line segment. Remove treating NULL as a synonym for a valid cairo_font_options_t* with default values, (a change that had been introduced as of cairo 1.5.8). Remove the altered handling of tolerance and fallback-resolution that had been introduced as of cairo 1.5.4. cairo-xlib ---------- Pass the original Drawable, (as opposed to the root window), to XCreatePixmap when creating a similar surface. This gives the X server more information so that it can be clever and efficient. cairo-pdf --------- Fix the rendering of repeating and reflecting patterns. Ensure miter limit is always >= 1, (smaller limits are not meaningful, but they can cause some PDF viewers to fail to display pages). Generate more efficient output when the same path is used for both fill and stroke. cairo-ps -------- Start sharing much of the cairo-pdf code rather than implementing very similar code in cairo-ps. Implement native support for repeating and reflecting linear gradients. Implement reflected surface patterns. Ensure miter limit is always >= 1, (smaller limits are not meaningful, but they can cause some PostScript viewers to crash). Generate PostScript that will perform more efficiently and use less memory on printers, (use currentfile instead of a giant string array for image data, and avoid using PostScript patterns for paint() and fill() when possible). cairo-svg --------- Avoid unnecessary rasterization when copying a "similar" surface to another svg surface, (allow the SOURCE operator to be implemented with all-vector operations if there are no underlying objects). cairo-atsui ----------- Eliminate infinite loop when attempting to render an empty string. Snapshot 1.5.8 (2008-01-30 Carl Worth ) ========================================================== This is the fourth snapshot in cairo's unstable 1.5 series. It comes 2 weeks after the 1.5.6 snapshot. It adds a few new API functions. Most notably all callers of cairo_image_surface_create_for_data should now be calling cairo_format_stride_for_width to compute a legal stride value. See below for more details. New API in cairo 1.5.8 ---------------------- We've added a new function that should be called to compute a legal stride value before allocating data to be used with cairo_image_surface_create_for_data: int cairo_format_stride_for_width (cairo_format_t format, int width); We've also added a new cairo_path_extents function that can be used to compute a bounding box for geometry such as a single line segment, (contrast with cairo_path_extents and cairo_stroke_extents): void cairo_path_extents (cairo_t *cr, double *x1, double *y1, double *x2, double *y2); And finally, we've added a function to allow for querying the XRenderPictFormat of a cairo-xlib surface: XRenderPictFormat * cairo_xlib_surface_get_xrender_format (cairo_surface_t *surface); API changes ----------- Fix return types of cairo_surface_show_page and cairo_surface_copy_page. This is an API change to functions that are new in the 1.5 series, so not an API break compared to any stable cairo release, (1.0.x, 1.2.x, 1.4.x). Change the return type of cairo_get_current_point() from void to cairo_status_t. This allows the caller to receive a CAIRO_STATUS_NO_CURRENT_POINT value to distinguish the a current point at the origin from no current point existing. Performance improvement ----------------------- Improve performance of clipping by using an optimized code path internally, (with the ADD operator instead of IN). General bug fixes ----------------- Fix various cairo_*_extents functions to initialize the return-value variables even in the case of a cairo_t in error. Treat NULL as a legitimate value for cairo_font_options_t*. [NOTE: On discussion afterwards, we decided against this change so it has been removed as of cairo 1.5.10.] Fix rendering with CAIRO_ANTIALIAS_NONE to be more predictable, (that is, to avoid seams appearing when geometry and imagery share an identical edge). Portions of this fix are in the pixman library and will appear in a future release of that library. Avoid triggering an error for a font size of 0. Miscellaneous changes --------------------- Require pixman >= 0.9.6. There has been a tremendous amount improvement to cairo's documentation. We're delighted that 100% of the public API has at least some documentation in the API reference manual. Many thanks to Behdad Esfahbod and Nis Martensen for leading this effort. cairo-pdf and cairo-ps ---------------------- Eliminate failure when a Type 1 font is embedded with an explicit glyph 0. cairo-pdf --------- Implement a more correct and more efficient approach for patterns with an extend mode of CAIRO_EXTEND_REFLECT. cairo-ps -------- Fix image masks to properly pack and pad mask bits. cairo-quartz ------------ Take care to only use DrawTiledImage for integer-aligned images, (and use slower paths to get the correct result in other cases). cairo-win32 ----------- Fix for older versions of mingw. Improve the handling of the clipping with the win32 and win32-printing surfaces. Fix rendering of non black/white text. Snapshot 1.5.6 (2008-01-15 Carl Worth ) ========================================================== This is the third snapshot in cairo's unstable 1.5 series. It comes about 6 weeks after the 1.5.4 snapshot. The only API addition compared to 1.5.4 is very minor, (a new value CAIRO_STATUS_TEMP_FILE_ERROR). The remainder of the changes are the usual accumulation of bug fixes and improvements. See below for details. General bug fixes ----------------- Fix handling of fonts that contain a mixture of outline and bitmapped glyphs. There was a change in this handling in 1.5.4 that improved some cases and also regressed other cases. Now, all cases should be handled quite well. Fix alignment issues that were causing SIGBUS failures on SPARC. Fix a regression (which first appeared in 1.5.2) where stroking under a large scale would sometimes incorrectly replace a miter join with a bevel join. (Thanks to Keith Packard.) Fix reporting of zero-sized extents to be {0,0} rather than {INT_MAX,INT_MIN}. This avoids several integer overflow and allocations of massive regions in some cases. Fix failures of gradients with no stops, (quartz, ps, and pdf). Fix handling of Type 1 fonts on Windows platforms. Fix handling of Type 1 fonts with no specific family name in the font itself, (generate a CairoFont-x-y name). Handle NULL string values in cairo_show_text, cairo_show_glyphs, and friends. Many robustness improvements along error-handling paths, (thanks as always, to Chris "ickle" Wilson). Various other minor fixes. Paginated backends (PDF/PostScript/win32-printing) -------------------------------------------------- Avoid unnecessary rasterization when using a paginated surface as a source, (such as drawing from one pdf surface to another). Fix replaying of paginated surface with more than one level of push/pop group. cairo-xlib ---------- Fix xlib backend to not consider recent X server release as having a buggy repeat implementation in the Render extension. cairo-pdf --------- Fix PDF output to avoid triggering very slow rendering in PDF viewers, (avoid starting and stopping the content stream for each pattern emission). Support CAIRO_OPERATOR_SOURCE in cases where there is nothing below the object being drawn. Fix to avoid seams appearing between multiple fallback regions. cairo-ps (PostScript) --------------------- Use correct bounding box in Type 3 fonts. Fix several bugs in cairo's PostScript output. These include making the PostScript output more compatible with recent versions of ghostscript that are more strict about Type 3 fonts, for example. Fix for win32 to not attempt to create temporary files in the root directory, (where the user may not have write permission). Avoid generating Level 3 PostScript if Level 2 is sufficient. Also, add code in output documents to alert the user if Level 3 PostScript is handed to a device that cannot handle PostScript beyond Level 2. cairo-directfb -------------- Various performance optimizations. Fixed support for small surfaces (less than 8x8). Provide support for environment variables CAIRO_DIRECTFB_NO_ACCEL to disable acceleration and CAIRO_DIRECTFB_ARGB_FONT to enable ARGB fonts instead of A8. cairo-os2 --------- Allow OS/2 APIs instead of C library allocation functions. Snapshot 1.5.4 (2007-12-05 Carl Worth ) ========================================================== This is the second snapshot in cairo's unstable 1.5 series. It comes just over 1 month after the 1.5.2 snapshot. There are no API changes or additions in 1.5.4 compared to 1.5.2, but there are several bug fixes, and some optimizations. Most of these apply to particular backends. See below for details. General improvements -------------------- Use less memory for spline approximation calculations. Change how the tolerance value is interpreted with regard to fallback-resolution. [Note: On further discussion, we decided against this change for now. It is removed as of cairo 1.5.10.] Fix precision of floating-point values in vector-output backends to avoid rounding errors with very small numbers. Xlib improvements ----------------- Fix bug in glyph rendering with xlib, (due to everything being clipped out). This was a regression in the 1.5.2 snapshot that was visible in the GIMP, for example. See: cairo 1.5.2 causes font problems in GIMP 2.4 status bar and evolution 2.12.1 https://bugs.freedesktop.org/show_bug.cgi?id=13084 PostScript improvements ----------------------- Fix bug leading to invalid PostScript files when rendering text, (need "0 0 xyshow" instead of "0 xyshow"). Fix many issues with Type 3 fonts, including making the resulting text extractable. Quartz improvements ------------------- Fix font metrics height value for ATSUI, (helps webkit on GTK+ OS X layout nicely). Fix gradients. Fix EXTEND_NONE mode for patterns. Fix cairo_quartz_surface_create to properly clear the new surface in cairo_quartz_surface_create. Fix to correctly handle 0x0 sized surfaces. Optimize drawing of EXTEND_REPEAT patterns for OS X 10.5. Snapshot 1.5.2 (2007-10-30 Carl Worth ) ========================================================== This is the first snapshot in cairo's unstable 1.5 series. It comes 4 months after the 1.4.10 release. This snapshot includes significant improvements to PDF and PostScript output, which is one of the things in which we're most interested in getting feedback. There are a couple of minor API additions, and several optimizations, (primarily in the "print/vector" backends). And there are dozens of bug fixes and robustness improvements. New dependency on external pixman library ----------------------------------------- A significant change in this snapshot compared to all previous cairo releases is that cairo now depends on an external "pixman" library for its software rendering. Previously this same code was compiled internally as part of cairo, but now the code is separate so that both cairo and the X server can now share common code, (thanks very much to Søren Sandmann for his work on separating pixman and maintaining it). So users will need to acquire and build pixman before being able to build cairo. The current release is 0.9.6 and can be obtained from here: http://cairographics.org/releases/pixman-0.9.6.tar.gz which can be verified with: http://cairographics.org/releases/pixman-0.9.6.tar.gz.sha1 66f01a682c64403a3d7a855ba5aa609ed93bcb9e pixman-0.9.6.tar.gz http://cairographics.org/releases/pixman-0.9.6.tar.gz.sha1.asc (signed by Carl Worth) Major PDF/PostScript improvements --------------------------------- Adrian Johnson has done some long-awaited work to make cairo's PDF and PostScript output more interesting than ever before. First, many operations that previously triggered image fallbacks will now be rendered as native vectors. These operations include: PDF: cairo_push_group, cairo_surface_create_similar, cairo_mask, A8/A1 surface sources, repeating/reflecting linear gradients. PostScript: cairo_push_group, cairo_surface_create_similar, gradients, bilevel alpha masks, (for example, all values either 0 or 255 for an A8 mask). Not only that, but when an image fallback is required, it will now be limited to only the necessary region. For example, a tiny translucent image overlaying a small portion of text would previously caused an entire PostScript page to be rendered as a giant image. Now, the majority of that page will be nice text, and there will only be a tiny image in the output. Additionally, the PostScript output now carefully encodes text so that if it is subsequently converted to PDF, the text will be selectable. This is very exciting progress, and we're hoping to hear from users during the 1.5 series about how things have improved, (for example, inkscape users doing cairo-based PDF export: please let us know how things look). And feel free to pass your thanks along to Adrian for his excellent work. NOTE: This much improved PDF output makes more sophisticated use of functionality in the PDF specification. This means that cairo's output will sometimes expose bugs in some free software PDF viewers, (evince, poppler, and xpdf, for example), that are not yet ready for such PDF files. We're working with the poppler maintainers to get these bugs fixed as quickly as possible. In the meantime, please double-check with other PDF viewers if cairo-generated PDF files are not being rendered correctly. It may be due to a bug in the viewer rather than in the PDF file that cairo has created. Robustness improvements ----------------------- Chris Wilson has made the largest contribution by far to cairo 1.5.2, (in number of commits). His more than 150 commits include a huge number of fixes to increase cairo's robustness. These fixes make cairo more robust against invalid and degenerate input, (NaN, empty path, etc.), against size-0 malloc calls, against memory leaks on error-recovery paths, and against other failures during error handling. He also implemented atomic operations to cairo, and used them to fix cairo's previously non-thread-safe reference counting, again improving robustness. Chris has put a tremendous amount of time and effort into writing analysis tools for this work, and in running those tools and fixing the problems they report. We're very grateful for this work, and hope that all cairo users appreciate the more robust implementation that results from it. This work is largely thankless, so it might make sense to notice sometime that cairo has been running quite smoothly for you, and when you do, send a quick "thank you" off to Chris Wilson, since it is all definitely running smoother thanks to his work. New API ------- There are no major additions to cairo's core API. The only new, generic functions are: void cairo_surface_copy_page (cairo_surface_t *surface); void cairo_surface_show_page (cairo_surface_t *surface); which can now be used much more conveniently than the existing cairo_copy_page and cairo_show_page functions in some situations. These functions act identically, but require only a cairo_surface_t* and not a cairo_t*. All other API additions are specific to particular backends. New cairo-win32 API (new font face function and "win32 printing" surface) ------------------------------------------------------------------------- There is a new function for creating a win32 font face for both a logfontw and an hfont together. This complements the existing functions for creating a font face from one or the other: cairo_font_face_t * cairo_win32_font_face_create_for_logfontw_hfont (LOGFONTW *logfont, HFONT font); There is also a new "win32 printing" surface: cairo_surface_t * cairo_win32_printing_surface_create (HDC hdc); This interface looks identical to the original cairo_win32_surface_create, (both accept and HDC), but the behavior of this new surface is very different. It should only be called with a printing DC, and will result in all drawing commands being stored into a meta-surface and emitted after each page is complete, with analysis to do as minimal image-based fallbacks as necessary. The behavior and implementation shares much with the PDF and PostScript backends. New cairo-ps API (EPS and PostScript level control) --------------------------------------------------- An often requested feature has been the ability to generate Encapsulated PostScript (EPS) with cairo. We have that now with the following very simple API. Just do cairo_ps_surface_create as usual then call this function with a true value: void cairo_ps_surface_set_eps (cairo_surface_t *surface, cairo_bool_t eps); [NOTE: As always with snapshots, it's possible---though not very likely---that the API could still be modified before a final release. For example, this is the first public cairo function that accepts a Boolean parameter. I'm generally opposed to Boolean parameters, but this is probably the one case where I'm willing to accept one, (namely a "set" function that accepts a single Boolean).] Also, it is now possible to control what PostScript level to target, (either level 2 or level 3), with the following new API: typedef enum _cairo_ps_level { CAIRO_PS_LEVEL_2, CAIRO_PS_LEVEL_3 } cairo_ps_level_t; void cairo_ps_surface_restrict_to_level (cairo_surface_t *surface, cairo_ps_level_t level); void cairo_ps_get_levels (cairo_ps_level_t const **levels, int *num_levels); const char * cairo_ps_level_to_string (cairo_ps_level_t level); Improvement for cairo-quartz ---------------------------- Brian Ewins had contributed several improvements to cairo-quartz. These include an implementation of EXTEND_NONE for linear and radial gradients, (so this extend mode will no longer trigger image fallbacks for these gradients), as well as native surface-mask clipping, (only on OS X 10.4+ where the CGContextClipToMask function is available). He also fixed a semantic mismatch between cairo and quartz for dashing with an odd number of entries in the dash array. We're grateful for Brian since not many quartz-specific improvements to cairo would be happening without him. Optimizations ------------- Optimize SVG output for when the same path is both filled and stroked, and avoid unnecessary identity matrix in SVG output. (Emmanuel Pacaud). Optimize PS output to take less space (Ken Herron). Make PS output more compliant with DSC recommendations (avoid initclip and copy_page) (Adrian Johnson). Make PDF output more compact (Adrian Johnson). Release glyph surfaces after uploading them to the X server, (should save some memory for many xlib-using cairo application). (Behdad Esfahbod). Optimize cairo-win32 to use fewer GDI objects (Vladimir Vukicevic). win32-printing: Avoid falling back to images when alpha == 255 everywhere. (Adrian Johnson). win32-printing: Avoid falling back for cairo_push_group and cairo_surface_create_similar. (Adrian Johnson) Bug fixes --------- Avoid potential integer overflows when allocating large buffers (Vladimir Vukicevic). Preparations to allow the 16.16 fixed-point format to change to 24.8 (Vladimir Vukicevic). Fix bugs for unsupported X server visuals (rgb565, rgb555, bgr888, and abgr8888). (Carl Worth and Vladimir Vukicevic) Fix bugs in PDF gradients (Adrian Johnson). Fix cairo-xlib to build without requiring Xrender header files (Behdad Esfahbod). Make cairo more resilient in the case of glyphs not being available in the current font. (Behdad Esfahbod) Prevent crashes when both atsui and ft font backends are compiled in (Brian Ewins). Make font subsetting code more robust against fonts that don't include optional tables (Adrian Johnson). Fix CFF subsetting bug, (which manifested by generating PDF files that Apple's Preview viewer could not read) (Adrian Johnson). Fixed error handling for quartz and ATSUI backends (Brian Ewins). Avoid rounding problems by pre-transforming to avoid integer-only restrictions on transformation in GDI (Adrian Johnson). Fixed an obscure bug (#7245) computing extents for some stroked paths (Carl Worth). Fix crashes due to extreme transformation of the pen, (seems to show up in many .swf files for some reason) (Carl Worth). Release 1.4.10 (2007-06-27 Carl Worth ) ========================================================== This is the fifth update in cairo's stable 1.4 series. It comes roughly three weeks after the 1.4.8 release. The most significant change in this release is a fix to avoid an X error in certain cases, (that were causing OpenOffice.org to crash in Fedora). There is also a semantic change to include child window contents when using an xlib surface as a source, an optimization when drawing many rectangles, and several minor fixes. Eliminate X errors that were killing OO.o (Chris Wilson) -------------------------------------------------------- Cairo is fixed to avoid the X errors propagated when cleaning up Render Pictures after the application had already destroyed the Drawable they reference. (It would be nice if the X server wouldn't complain that some cleanup work is already done, but there you have it.) This fixes the bug causing OpenOffice.org to crash as described here: XError on right click menus in OOo. https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=243811 Use IncludeInferiors when using xlib surface as a source (Ryan Lortie) ---------------------------------------------------------------------- When an xlib surface is used as the source of a draw operation the contents of child windows are now included in the source data. The semantics of drawing to xlib surfaces are unchanged (ie: draws are still clipped by child windows overlapping the destination window). Optimize drawing of many rectangles (Vladimir Vukicevic) -------------------------------------------------------- Avoid O(N*N) loop when filling many axis-aligned rectangles, (either many rectangles as separate sub-paths or due to dashing). Miscellaneous fixes ------------------- Fix cairo-perf on Solaris by linking to librt. (Behdad Esfahbod) Fix make check for systems that require executable files to have a particular extension. (Behdad Esfahbod) Eliminate some warnings in cairo-quartz. (Brian Ewins) Fix build-breaking typo for cairo-directfb. (Chris Wilson) Release 1.4.8 (2007-06-07 Carl Worth ) ========================================================= This is the fourth update in cairo's stable 1.4 series. It comes just over five weeks after the 1.4.6 release. This release includes a thread-safe surface-cache for solid patterns which significantly improves text rendering with the xlib backend. Also, dozens of error paths in cairo have been fixed thanks to extensive fault-injection testing by Chris Wilson. Surface cache for solid patterns -------------------------------- Originally written by Jorn Baayen, the introduction of a small cache for surfaces created for solid patterns improves performance dramatically. For example, this reduces the volume of X requests during text rendering to the same level as Xft. This cache first made its appearance in a 1.3.x snapshot, but was removed before appearing in any previous major release due to complications with multi-threaded programs. For example, programs like evince that would carefully restrict usage of cairo-xlib to a single thread were unpleasantly surprised to find that using cairo-image in a separate thread could trigger X requests. Behdad Esfahbod designed a fix which was implemented by Chris Wilson. Now, the necessary X requests are queued up until the next time the application directly operates on an xlib surface. Improved error handling paths ------------------------------ Chris Wilson continued the excellent work he started in cairo 1.4.4 to make cairo much more robust against out-of-memory and other errors. He applied his memory allocation fault injection cairo's main test suite, (previously he had applied it to cairo's performance suite). Chris's testing found dozens of bugs which he fixed. Many of these bugs had perhaps never been hit by any users. But at least one was hit by the gnome-about program which resulted in dozens of duplicated bug reports against that program: http://bugzilla.gnome.org/show_bug.cgi?id=431990 We were very pleasantly surprised to see this bug get fixed as a side-effect of Chris's work. Well done, Chris! Other fixes ----------- Cleanup of mutex declarations (Behdad Esfahbod) Remove unnecessary clip region from SVG output (Emmanuel Pacaud) Remove Xsun from the buggy_repeat blacklist (Elaine Xiong) ATSUI: Fix glyph measurement: faster and more correct (Brian Ewins) Quartz: fixed 'extend' behaviour for patterns, improved pattern performance, and a few smaller correctness fixes. (Brian Ewins, Vladimir Vukicevic) Release 1.4.6 (2007-05-01 Carl Worth ) ========================================================= This is the third update in cairo's stable 1.4 series. It comes a little less than three weeks since the 1.4.4 release. This release fixes the broken mutex initialization that made cairo 1.4.4 unusable on win32, OS/2, and BeOS systems. This release also adds significant improvements to cairo's PDF backend, (native gradients!), and a couple of performance optimizations, (one of which is very significant for users of the xlib backend). See below for more details. Repaired mutex initialization ----------------------------- We apologize that cairo 1.4.4 did little more than crash on many platforms which are less-frequently used by the most regular cairo maintainers, (win32, OS/2, and BeOS). The mutex initialization problems that caused those crashes should be fixed now. And to avoid similar problems in the future, we've now started posting pre-release snapshots to get better testing, (subscribe to cairo@cairographics.org if you're interested in getting notified of those and testing them). PDF Improvements ---------------- Thanks to Adrian Johnson, (cairo PDF hacker extraordinaire), we have several improvements to cairo's PDF backend to announce: Native gradients: As of cairo 1.4.6, cairo will now generate native PDF gradients in many cases, (previously, the presence of a gradient on any page would force rasterized output for that page). Currently, only gradients with extend types of PAD (the default) or NONE will generate native PDF gradients---others will still trigger rasterization, (but look for support for other extend modes in a future release). Many thanks to Miklós Erdélyi as well, who did the initial work for this support. Better compatibility with PDF viewers: The PDF output from cairo should now be displayed correctly by a wider range of PDF viewers. Adrian tested cairo's PDF output against many PDF viewers, identified a common bug in many of those viewers (ignoring the CTM matrix in some cases), and modified cairo's output to avoid triggering that bugs (pre-transforming coordinates and using an identity matrix). Better OpenType/CFF subsetting: Cairo will now embed CFF and TrueType fonts as CID fonts. Performance optimizations ------------------------- Faster cairo_paint_with_alpha: The cairo_paint_with_alpha call is used to apply a uniform alpha mask to a pattern. For example, it can be used to gradually fade an image out or in. Jeff Muizelaar fixed some missing/broken optimizations within the implementation of this function resulting in cairo_paint_with_alpha being up to 4 times faster when using cairo's image backend. Optimize rendering of "off-screen" geometry: Something that applications often do is to ask cairo to render things that are either partially or wholly outside the current clip region. Since 1.4.0 the image backend has been fixed to not waste too much time in this case. But other backends have still been suffering. In particular, the xlib backend has often performed quite badly in this situation. This is due to a bug in the implementation of trapezoid rasterization in many X servers. Now, in cairo 1.4.6 there is a higher-level fix for this situation. Cairo now eliminates or clips trapezoids that are wholly or partially outside the clip region before handing the trapezoids to the backend. This means that the X server's performance bug is avoided in almost all cases. The net result is that doing an extreme zoom-in of vector-based objects drawn with cairo might have previously brought the X server to its knees as it allocated buffers large enough to fit all of the geometry, (whether visible or not). But now the memory usage should be bounded and performance should be dramatically better. Miscellaneous ------------- Behdad contributed an impressively long series of changes that organizes cairo's internals in several ways that will be very beneficial to cairo developers. Thanks, Behdad! Behdad has also provided a utility for generating malloc statistics, (which was used during the great malloc purges of 1.4.2 and 1.4.4). This utility isn't specific to cairo so may be of benefit to others. It is found in cairo/util/malloc-stats.c and here are Behdad's notes on using it: To build, do: make malloc-stats.so inside util/, and to use, run: LD_PRELOAD=malloc-stats.so some-program For binaries managed by libtool, eg, cairo-perf, do: ../libtool --mode=execute /bin/true ./cairo-perf LD_PRELOAD="../util/malloc-stats.so" .libs/lt-cairo-perf Finally, the cairo-perf-diff-files utility was enhanced to allow for generating performance reports from several runs of the same backend while some system variables were changed. For example, this is now being used to allow cairo-perf to measure the performance of various different acceleration architectures and configuration options of the X.org X server. Release 1.4.4 (2007-04-13 Carl Worth ) ========================================================= This is the second update release in cairo's stable 1.4 series. It comes just less than a month after 1.4.2. The changes since 1.4.2 consist primarily of bug fixes, but also include at least one optimization. See below for details. Of all the work that went into the 1.4.4 release There have been lots of individuals doing lots of great work on cairo, but two efforts during the 1.4.4 series deserve particular mention: Internal cleanup of error handling, (Chris Wilson) -------------------------------------------------- Chris contributed a tremendous series of patches (74 patches!) to improve cairo's handling of out-of-memory and other errors. He began by adding gcc's warn_unused_attribute to as many functions as possible, and then launched into the ambitious efforts of adding correct code to quiet the dozens of resulting warnings. Chris also wrote a custom valgrind skin to systematically inject malloc failures into cairo, and did all the work necessary to verify that cairo's performance test suite runs to completion without crashing. The end result is a much more robust implementation. Previously, many error conditions would have gone unnoticed and would have led to assertion failures, segmentation faults, or other harder-to-diagnose problems. Now, more than ever, cairo should cleanly let the user know of problems through cairo_status and other similar status functions. Well done, Chris! More malloc reduction, (Mathias Hasselmann) ------------------------------------------- After 1.4.0, Behdad launched an effort to chase down excessive calls to malloc within the implementation of cairo. He fixed a lot of malloc-happy objects for 1.4.2, but one of the worst offenders, (pixman regions), was left around. Mathias contributed an excellent series of 15 patches to finish off this effort. The end result is a cairo that calls malloc much less often than it did before. Compared to 1.4.2, 55% of the calls to malloc have been eliminate, (and 60% have been eliminated compared to 1.4.0). Well done, Mathias! Other improvements since 1.4.2 ------------------------------ • Centralize mutex declarations (will reduce future build breaks), (Mathias Hasselmann) • Reduce malloc by caching recently freed pattern objects (Chris Wilson) • Fix some broken composite operations (David Reveman) https://bugs.freedesktop.org/show_bug.cgi?id=5777 Backend-specific fixes ---------------------- PDF: • Use TJ operator for more compact representation of glyphs (Adrian Johnson) • Fix glyph positioning bug when glyphs are not horizontal http://lists.freedesktop.org/archives/cairo/2007-April/010337.html win32: • Fix crash when rendering with bitmap fonts (Carl Worth) https://bugzilla.mozilla.org/show_bug.cgi?id=376498 xlib: • Turn metrics-hinting on by default (Behdad Esfahbod) • Fix edge-effect problem with transformed images drawn to xlib (Behdad Esfahbod) https://bugs.freedesktop.org/show_bug.cgi?id=10508 • Avoid dereferencing a NULL screen. (Chris Wilson) https://bugs.freedesktop.org/show_bug.cgi?id=10517 Quartz/ATSUI: • Fix scaling of glyph surfaces (Brian Ewins) https://bugs.freedesktop.org/show_bug.cgi?id=9568 • Fix compilation failure when both xlib and quartz enabled (Brian Ewins) • Fix rounding bug leading to incorrectly positioned glyphs (Robert O'Callahan) https://bugs.freedesktop.org/show_bug.cgi?id=10531 Release 1.4.2 (2007-03-19 Carl Worth ) ========================================================= This is the first update release in cairo's stable 1.4 series. It comes just less than 2 weeks after 1.4.0. We hadn't anticipated an update this early, but we've managed to collect some important fixes that we wanted to get out to cairo users as soon as possible, (6 fixes for crashes, 1 case where graphical elements would not be drawn at all, a handful of backend-specific bugs, and several important build fixes). There's almost nothing but bug fixes in this release, (see below one optimization that Behdad did sneak in), so we recommend that everyone upgrade to this release when possible. Thanks to the many people that worked to fix these bugs, and those that did the work to report them and to test the fixes, (wherever possible both names are credited below). Critical fixes -------------- • Fix a crash due to a LOCK vs. UNLOCK typo (M. Drochner fixing Carl Worth's embarrassing typo). http://bugs.freedesktop.org/show_bug.cgi?id=10235 • Fix potential buffer overflow, which on some systems with a checking variant of snprintf would lead to a crash (Adrian Johnson, Stanislav Brabec, and sangu). https://bugs.freedesktop.org/show_bug.cgi?id=10267 https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=232576 • Fix a crash in cairo_stroke_extents or cairo_in_stroke when line width is 0.0. (Carl Worth and Sebastien Bacher) https://bugs.freedesktop.org/show_bug.cgi?id=10231 • Fix a crash on certain combinations of X server/video drivers (Carl Worth and Tomas Carnecky). https://bugs.freedesktop.org/show_bug.cgi?id=10250 • Fix a crash due to mishandling of invalid user input (Carl Worth and Alexander Darovsky). https://bugs.freedesktop.org/show_bug.cgi?id=9844 • xlib: Cleanup server-side glyph caches on XCloseDisplay. This eliminated a crash detected by the perf suite, (and that applications could have run into as well). (Chris Wilson) Other bug fixes --------------- • Fix for some geometry which simply disappeared under some transformations---a stroked line with an extreme skew in X, for example (Carl Worth and Jonathan Watt). https://bugzilla.mozilla.org/show_bug.cgi?id=373632 • SVG: Fix radial gradients for CAIRO_EXTEND_REFLECT and when r0 > r1 (Emmanuel Pacaud). • PDF: Set page group color space to DeviceRGB. This fixes incorrect (muddy) transparent colors when rendering cairo PDF output in some viewers. (Adrian Johnson, Adam Goode, and MenTaLguY). http://lists.freedesktop.org/archives/cairo/2006-November/008551.html • win32: Return correct metrics when hinting is off, and fix font descent computation (Behdad Esfahbod). • quartz: Fix glyph interfaces to correctly return user-space rather than device-space coordinates (Brian Ewins). https://bugs.freedesktop.org/show_bug.cgi?id=9568 • xcb: Fix parameter-order confusion with xcb_create_pixmap, which now makes all tests that pass with xlib now pass with xcb (Carl Worth, Jamey Sharp). • Fix some memory leaks in the perf suite (Chris Wilson). • Fix perf suite to consider changes in pixman/src (Mathias Hasselmann). Build fixes ----------- • Don't include pre-generated cairo-features.h file. This was causing build failures when building with the directfb backend enabled (Behdad Esfahbod). https://bugs.freedesktop.org/show_bug.cgi?id=10189 • Eliminate use of maintainer mode from cairo's automake/configure script. This means that updates to files such as Makefile.am will take effect, (by rerunning automake and friends as necessary) when invoking make rather than being silently ignored. (Behdad Esfahbod) • Don't compile cairo-deflate-stream.c, which depends on zlib, unless building the pdf backend which requires it. (Carl Worth, Tor Lillqvist) https://bugs.freedesktop.org/show_bug.cgi?id=10202 • Don't make the ps backend link against zlib anymore, since it doesn't require it (Carl Worth). • Use "find !" rather than "find -not" for better portability (Thomas Klausner). https://bugs.freedesktop.org/show_bug.cgi?id=10226 • Don't use unsupported visibility attribute "hidden" on Solaris (Gilles Dauphin, Thomas Klausner). https://bugs.freedesktop.org/show_bug.cgi?id=10227 Optimization ------------ • It was Behdad that suggested we focus strictly on bug fixes now that we shipped so many performance improvements in 1.4.0, but it was also Behdad that got distracted by the chance to remove a lot of mallocs from cairo. Paths, gstates, trapezoids, splines, polygons, and gradient color stops will now use small, stack-allocated buffers in the most common cases rather than calling malloc as often. (Behdad Esfahbod). And look for more from Mathias Hasselmann soon. Release 1.4.0 (2007-03-06 Carl Worth ) ========================================================= The many people[*] who have been working hard on cairo are very pleased to announce the long-awaited release of cairo 1.4. This release comes 4 months after the last stable update release (1.2.6) and 9 months since the initial release of 1.2.0. The release notes below are intended to capture the highlights of the changes that have occurred from the 1.2 series to the new 1.4.0 release. Performance improvements ------------------------ Within the cairo project, the last 6 months or so has seen an intense effort focusing on the performance of cairo itself. That effort has paid off considerably, as can be seen in the following highlights of some of the performance differences from cairo 1.2.6 to cairo 1.4.0. (Note: The performance results reported here were measured on an x86 laptop. Many of the improvements in 1.4---particular those involving text rendering---are even more dramatic on embedded platforms without hardware floating-point units. Such devices played an important part of many of the optimizations that found their way into cairo over the last few months.) • Dramatic improvement when drawing objects that are mostly off-screen with the image backend (with the xlib backend this case is still slow due to an X server bug): image-rgba long-lines-uncropped-100 479.64 -> 4.98: 96.24x speedup ███████████████████████████████████████████████▋ • Dramatic improvement when copying a small fraction of an image surface to an xlib surface: xlib-rgba subimage_copy-512 3.93 -> 0.07: 54.52x speedup ██████████████████████████▊ • Dramatic improvement to tessellation speed for complex objects: image-rgb tessellate-256-100 874.16 -> 34.79: 25.13x speedup ████████████▏ xlib-rgba zrusin_another_fill-415 148.40 -> 13.85: 10.72x speedup ████▉ xlib-rgb world_map-800 680.20 -> 345.54: 1.97x speedup ▌ • Dramatic improvement to the speed of stroking rectilinear shapes, (such as the outline of a rectangle or "box"): image-rgb box-outline-stroke-100 0.18 -> 0.01: 24.22x speedup ███████████▋ xlib-rgb box-outline-stroke-100 0.46 -> 0.06: 8.05x speedup ███▌ • Dramatic improvements to text rendering speeds: xlib-rgba text_image_rgba_over-256 63.12 -> 9.61: 6.57x speedup ██▊ • 3x improvements to floating-point to fixed-point conversion speeds: image-rgba pattern_create_radial-16 9.29 -> 3.44: 2.70x speedup ▉ • 2x improvements to linear gradient computation: image-rgb paint_linear_rgb_source-512 26.22 -> 11.61: 2.26x speedup ▋ • 2x improvement to a case common in PDF rendering: image-rgb unaligned_clip-100 0.10 -> 0.06: 1.81x speedup ▍ • 1.3x improvement to rectangle filling speed (note: this improvement is new since 1.3.16---previously this test case was a 1.3x slowdown compared to 1.2.6): image-rgba rectangles-512 6.19 -> 4.37: 1.42x speedup ▎ xlib-rgba rectangles-512 7.48 -> 5.58: 1.34x speedup ▏ NOTE: In spite of our best efforts, there are some measurable performance regressions in 1.4 compared to 1.2. It appears that the primary problem is the increased overhead of the new tessellator when drawing many, very simple shapes. The following test cases capture some of that slowdown: image-rgba mosaic_tessellate_lines-800 11.03 -> 14.29: 1.30x slowdown ▏ image-rgba box-outline-fill-100 0.01 -> 0.01: 1.26x slowdown ▏ image-rgba fill_solid_rgb_over-64 0.20 -> 0.22: 1.12x slowdown image-rgba fill_image_rgba_over-64 0.23 -> 0.25: 1.10x slowdown xlib-rgb paint_image_rgba_source-256 3.24 -> 3.47: 1.07x slowdown We did put some special effort into eliminating this slowdown for the very common case of drawing axis-aligned rectangles with an identity matrix (see the box-outline-stroke and rectangles speedup numbers above). Eliminating the rest of this slowdown will be a worthwhile project going forward. Also note that the "box-outline-fill" case is a slowdown while "box-outline-stroke" is a (huge) speedup. These two test cases resulted from the fact that some GTK+ theme authors were filling between two rectangles to avoid slow performance from the more natural means of achieving the same shape by stroking a single rectangle. With 1.4 that workaround should definitely be eliminated as it will now cause things to perform more slowly. Greatly improved PDF output --------------------------- We are very happy to be able to announce that cairo-generated PDF output will now have text that can be selected, cut-and-pasted, and searched with most capable PDF viewer applications. This is something that was not ever possible with cairo 1.2. Also, the PDF output now has much more compact encoding of text than before. Cairo is now much more careful to not embed multiple copies of the same font at different sizes. It also compresses text and font streams within the PDF output. API additions ------------- There are several new functions available in 1.4 that were not available in 1.2. Curiously, almost all of the new functions simply allow the user to query state that has been set in cairo (many new "get" functions) rather than providing any fundamentally new operations. The new functionality is: • Getting information about the current clip region cairo_clip_extents cairo_copy_clip_rectangle_list cairo_rectangle_list_destroy • Getting information about the current dash setting cairo_get_dash_count cairo_get_dash • Getting information from a pattern cairo_pattern_get_rgba cairo_pattern_get_surface cairo_pattern_get_color_stop_rgba cairo_pattern_get_color_stop_count cairo_pattern_get_linear_points cairo_pattern_get_radial_circles • Getting the current scaled font cairo_get_scaled_font • Getting reference counts cairo_get_reference_count cairo_surface_get_reference_count cairo_pattern_get_reference_count cairo_font_face_get_reference_count cairo_scaled_font_get_reference_count • Setting/getting user data on objects cairo_set_user_data cairo_get_user_data cairo_pattern_set_user_data cairo_pattern_get_user_data cairo_scaled_font_set_user_data cairo_scaled_font_get_user_data • New cairo-win32 functions: cairo_win32_surface_create_with_ddb cairo_win32_surface_get_image cairo_win32_scaled_font_get_logical_to_device cairo_win32_scaled_font_get_device_to_logical API deprecation --------------- The CAIRO_FORMAT_RGB16_565 enum value has been deprecated. It never worked as a format value for cairo_image_surface_create, and it wasn't necessary for supporting 16-bit 565 X server visuals. A sampling of bug fixes in cairo 1.4 ------------------------------------ • Fixed radial gradients • Fixed dashing (degenerate and "leaky" cases) • Fixed transformed images in PDF/PS output (eliminate bogus repeating) • Eliminate errors from CAIRO_EXTEND_REFLECT and CAIRO_EXTEND_PAD • cairo_show_page no longer needed for single-page output • SVG: Fix bug preventing text from appearing in many viewers • cairo-ft: Return correct metrics when hinting is off • Eliminate crash in cairo_create_similar if nil surface is returned • Eliminate crash after INVALID_RESTORE error • Fix many bugs related to multi-threaded use and locking • Fix for glyph spacing 32 times larger than desired (cairo-win32) • Fixed several problems in cairo-atsui (assertion failures) • Fix PDF output to avoid problems when printing from Acrobat Reader • Fix segfault on Mac OS X (measuring a zero-length string) • Fix text extents to not include the size of non-inked characters • Fix for glyph cache race condition in glitz backend (Jinghua Luo) • Fix make check to work on OPD platforms (IA64 or PPC64) • Fix compilation problems of cairo "wideint" code on some platforms • Many, many others... Experimental backends (quartz, XCB, OS/2, BeOS, directfb) --------------------------------------------------------- None of cairo's experimental backends are graduating to "supported" status with 1.4.0, but two of them in particular (quartz and xcb), are very close. The quartz baceknd has been entirely rewritten and is now much more efficient. The XCB backend has been updated to track the latest XCB API (which recently had a 1.0 release). We hope to see these backends become supported in a future release, (once they are passing all the tests in cairo's test suite). The experimental OS/2 backend is new in cairo 1.4 compared to cairo 1.2. Documentation improvements -------------------------- We have added documentation for several functions and types that were previously undocumented, and improved documentation on other ones. As of this release, there remain only two undocumented symbols: cairo_filter_t and cairo_operator_t. [*]Thanks to everyone --------------------- I've accounted for 41 distinct people with attributed code added to cairo between 1.2.6 and 1.4.0, (their names are below). That's an impressive number, but there are certainly dozens more that contributed with testing, suggestions, clarifying questions, and encouragement. I'm grateful for the friendships that have developed as we have worked on cairo together. Thanks to everyone for making this all so much fun! Adrian Johnson, Alfred Peng, Alp Toker, Behdad Esfahbod, Benjamin Otte, Brian Ewins, Carl Worth, Christian Biesinger, Christopher (Monty) Montgomery, Daniel Amelang, Dan Williams, Dave Yeo, David Turner, Emmanuel Pacaud, Eugeniy Meshcheryakov, Frederic Crozat, Hans Breuer, Ian Osgood, Jamey Sharp, Jeff Muizelaar, Jeff Smith, Jinghua Luo, Jonathan Watt, Joonas Pihlaja, Jorn Baayen, Kalle Vahlman, Kjartan Maraas, Kristian Høgsberg, M Joonas Pihlaja, Mathias Hasselmann, Mathieu Lacage, Michael Emmel, Nicholas Miell, Pavel Roskin, Peter Weilbacher, Robert O'Callahan, Soren Sandmann Pedersen, Stuart Parmenter, T Rowley, Vladimir Vukicevic Snapshot 1.3.16 (2007-03-02 Carl Worth ) =========================================================== New API functions ----------------- A few new public functions have been added to the cairo API since the 1.3.14 snapshot. These include a function to query the current scaled font: cairo_get_scaled_font New functions to query the reference count of all cairo objects: cairo_get_reference_count cairo_surface_get_reference_count cairo_pattern_get_reference_count cairo_font_face_get_reference_count cairo_scaled_font_get_reference_count And new functions to allow the use of user_data with any cairo object, (previously these were only available on cairo_surface_t and cairo_font_face_t objects): cairo_set_user_data cairo_get_user_data cairo_pattern_set_user_data cairo_pattern_get_user_data cairo_scaled_font_set_user_data cairo_scaled_font_get_user_data Usability improvement for PDF/PS/SVG generation ----------------------------------------------- In previous versions of cairo, generating single-page output with the cairo-pdf, cairo-ps, or cairo-svg backends required a final call to cairo_show_page. This was often quite confusing as people would port functional code from a non-paginated backend and be totally mystified as to why the output was blank until they learned to add this call. Now that call to cairo_show_page is optional, (it will be generated implicitly if the user does not call it). So cairo_show_page is only needed to explicitly separate multiple pages. Greatly improved PDF output --------------------------- We are very happy to be able to announce that cairo-generated PDF output will now have text that can be selected, cut-and-paste, and searched with most capable PDF viewer applications. This is something that was not ever possible with cairo 1.2. Also, the PDF output now has much more compact encoding of text than before. Cairo is now much more careful to not embed multiple copies of the same font at different sizes. It also compresses text and font streams within the PDF output. Major bug fixes --------------- • Fixed radial gradients The rendering of radial gradients has been greatly improved. In the cairo 1.2 series, there was a serious regression affecting radial gradients---results would be very incorrect unless one of the gradient circles had a radius of 0.0 and a center point within the other circle. These bugs have now been fixed. • Fixed dashing Several fixes have been made to the implementation of dashed stroking. Previously, some dashed, stroked rectangles would mis-render and fill half of the rectangle with a large triangular shape. This bug has now been fixed. • Fixed transformed images in PDF/PS output In previous versions of cairo, painting with an image-based source surface pattern to the PDF or PS backends would cause many kinds of incorrect results. One of the most common problems was that an image would be repeated many times even when the user had explicitly requested no repetition with CAIRO_EXTEND_NONE. These bugs have now been fixed. • Eliminate errors from CAIRO_EXTEND_REFLECT and CAIRO_EXTEND_PAD In the 1.2 version of cairo any use of CAIRO_EXTEND_REFLECT or CAIRO_EXTEND_PAD with a surface-based pattern resulted in an error, (cairo would stop rendering). This bug has now been fixed. Now, CAIRO_EXTEND_REFLECT should work properly with surface patterns. CAIRO_EXTEND_PAD is still not working correctly, but it will now simply behave as CAIRO_EXTEND_NONE rather than triggering the error. New rewrite of quartz backend (still experimental) -------------------------------------------------- Cairo's quartz backend has been entirely rewritten and is now much more efficient. This backend is still marked as experimental, not supported, but it is now much closer to becoming an officially supported backend. (For people that used the experimental nquartz backend in previous snapshots, that implementation has now been renamed from "nquartz" to "quartz" and has replaced the old quartz backend.) Documentation improvements -------------------------- We have added documentation for several functions and types that were previously undocumented, and improved documentation on other ones. As of this release, there remain only two undocumented symbols: cairo_filter_t and cairo_operator_t. Other bug fixes --------------- • cairo-svg: Fix bug that was preventing text from appearing in many viewers • cairo-ft: Return correct metrics when hinting is off • Cairo 1.3.14 deadlocks in cairo_scaled_font_glyph_extents or _cairo_ft_unscaled_font_lock_face https://bugs.freedesktop.org/show_bug.cgi?id=10035 • cairo crashes in cairo_create_similar if nil surface returned by other->backend->create_similar https://bugs.freedesktop.org/show_bug.cgi?id=9844 • evolution crash in _cairo_gstate_backend_to_user() https://bugs.freedesktop.org/show_bug.cgi?id=9906 • Fix memory leak in rectilinear stroking code Things not in this release -------------------------- • Solid-surface-pattern cache: This patch had been applied during the 1.3.x series, but it was reverted due to some inter-thread problems it caused. The patch is interesting since it made a big benefit for text rendering performance---so we'll work to bring a corrected version of this patch back as soon as possible. Snapshot 1.3.14 (2006-02-13 Carl Worth ) =========================================================== This is the seventh development snapshot in the 1.3 series, (and there likely won't be many more before the 1.4.0 release). It comes just over 3 weeks after the 1.3.12 snapshot. Since we're so close to the 1.4.0 release, there are not a lot of new features nor even a lot of new performance improvements in this snapshot. Instead, there are a great number of bug fixes. Some are long-standing bugs that we're glad to say goodbye to, and several are fixes for regressions that were introduced as part of the optimization efforts during the 1.3.x series. PDF text selection fixed ------------------------ The inability to correctly select text in cairo-generated PDF has been a defect ever since the initial support for the PDF backend in the cairo 1.2.0 release. With the 1.3.14 snapshot, in most situations, and with most PDF viewer applications, the PDF generated by cairo will allow text to be correctly selected for copy-and-paste, (as well as searching). We're very excited about this new functionality, (and very grateful to Adrian Johnson, Behdad Esfahbod, and others that have put a lot of work into this lately). Please test this new ability and give feedback on the cairo@cairographics.org list. Many thread-safety issues fixed ------------------------------- We've discovered that no release of cairo has ever provided safe text rendering from a multi-threaded application. With the 1.3.14 snapshot a huge number of the bugs in this area have been fixed, and multiple application dvelopers have now reported success at writing multi-threaded applications with cairo. Other fixes ----------- Fixed a bug that was causing glyph spacing to be 32 times larger than desired when using cairo-win32. Fixed a regression in the rendering of linear gradients that had been present since the 1.3.8 snapshot. Fixed several problems in cairo-atsui that were leading to assertion failures when rendering text. Fix corrupted results when rendering a transformed source image surface to an xlib surface. This was a regression that had been present since the 1.3.2 snapshot. Fixed PDF output to prevent problems printing from some versions of Acrobat Reader, (a single glyph was being substituted for every glyph). And many other fixes as well, (see the logs for details). Snapshot 1.3.12 (2007-01-20 Carl Worth ) =========================================================== The relentless march toward the cairo 1.4 release continues, (even if slightly late out of the starting blocks in 2007). This is the sixth development snapshot in the 1.3 series. It comes 4 weeks after the 1.3.10 snapshot. Performance ----------- As usual, this snapshot has some fun performance improvements to show off: image-rgba long-lines-uncropped-100 470.08 -> 4.95: 94.91x speedup ███████████████████████████████████████████████ image-rgb long-lines-uncropped-100 461.60 -> 4.96: 93.02x speedup ██████████████████████████████████████████████ This 100x improvement, (and yes, that's 100x, not 100%), in the image backend occurs when drawing large shapes where only a fraction of the shape actually appears in the final result, (the rest being outside the bounds of the destination surface). Many applications should see speedups here, and the actual amount of speedup depends on the ratio of non-visible to visible portions of geometry. [Note: There remains a similar performance bug when drawing mostly non-visible objects with the xlib backend. This is due to a similar bug in the X server itself, but we hope a future cairo snapshot will workaround that bug to get a similar speedup with the xlib backend.] image-rgba unaligned_clip-100 0.09 -> 0.06: 1.67x speedup ▍ image-rgb unaligned_clip-100 0.09 -> 0.06: 1.66x speedup ▍ This speedup is due to further MMX optimization by Soeren Sandmann for a case commonly hit when rendering PDF files, (and thanks to Jeff Muizelaar for writing code to extract the test case for us). There's another MMX optimization in this snapshot (without a fancy speedup chart) by Dan Williams which improves compositing performance specifically for the OLPC machine. Thanks to Adrian Johnson, cairo's PDF output is now much more efficient in the way it encodes text output. By reducing redundant information and adding compression to text output streams, Adrian achieved a ~25x improvement in the efficiency of encoding text in PDF files, (was ~45 bytes per glyph and is now ~1.6 bytes per glyph). Bug fixes --------- In addition to those performance improvements, this snapshot includes several bug fixes: * A huge number of bug fixes for cairo-atsui text rendering, (for mac OS X). These bugs affect font selection, glyph positioning, glyph rendering, etc. One noteworthy bug fixes is that cairo_select_font_face will no longer arbitrarily select bold nor italic when not requested, (at least not when using a standard CSS2 font family name such as "serif", "sans-serif", "monospace", etc.). All these fixes are thanks to Brian Ewins who continues to do a great job as the new cairo-atsui maintainer. * Fix PDF output so that images that are scaled down no longer mysteriously repeat (Carl Worth). * Fix segfault on Mac OS X dues to attempt to measure extents of a zero-length string (Behdad Esfahbod). * Fix text extents to not include the size of initial/trailing non-inked characters (Behdad Esfahbod). API tweaks ---------- Three functions have had API changes to improve consistency. Note that the API functions being changed here are all functions that were introduced as new functions during these 1.3.x snapshots. As always, there will not be any API changes to functions included in a major release (1.2.x, 1.4.x, etc.) of cairo. The changes are as follows: * Rename of cairo_copy_clip_rectangles to cairo_copy_clip_rectangle_list. * Change cairo_get_dash_count to return an int rather than accepting a pointer to an int for the return value. * Change cairo_get_dash to have a void return type rather than returning cairo_status_t. It's possible there will be one more round of changes to these functions, (and perhaps cairo_get_color_stop as well), as we seek to establish a unifying convention for returning lists of values. Snapshot 1.3.10 (2006-12-23 Carl Worth ) =========================================================== Santa Claus is coming just a little bit early this year, and he's bringing a shiny new cairo snapshot for all the good little boys and girls to play with. This is the fifth development snapshot in the 1.3 series. It comes 9 days after the 1.3.8 snapshot, and still well within our goal of having a new snapshot every week, (though don't expect one next week---we'll all be too stuffed with sugar plums). Speaking of sugar plums, there's a sweet treat waiting in this cairo snapshot---greatly improved performance for stroking rectilinear shapes, like the ever common rectangle: image-rgb box-outline-stroke-100 0.18 -> 0.01: 25.58x speedup ████████████████████████▋ image-rgba box-outline-stroke-100 0.18 -> 0.01: 25.57x speedup ████████████████████████▋ xlib-rgb box-outline-stroke-100 0.49 -> 0.06: 8.67x speedup ███████▋ xlib-rgba box-outline-stroke-100 0.22 -> 0.04: 5.39x speedup ████▍ In past releases of cairo, some people had noticed that using cairo_stroke to draw rectilinear shapes could be awfully slow. Many people had worked around this by using cairo_fill with a more complex path and gotten a 5-15x performance benefit from that. If you're one of those people, please rip that workaround out, as now the more natural use of cairo_stroke should be 1.2-2x faster than the unnatural use of cairo_fill. And if you hadn't ever implemented that workaround, then you just might get to see your stroked rectangles now get drawn 5-25x faster. Beyond that performance fix, there are a handful of bug fixes in this snapshot: * Fix for glyph cache race condition in glitz backend (Jinghua Luo) * Many fixes for ATSUI text rendering (Brian Ewins) * Un-break recent optimization-triggered regression in rendering text with a translation in the font matrix (Behdad Esfahbod) * Fix make check to work on OPD platforms (IA64 or PPC64) (Frederic Crozat) * Fix a couple of character spacing issues on Windows (Jonathan Watt) Have fun with that, everybody, and we'll be back for more in the new year, (with a plan to add the last of our performance improvements in this round, fix a few bad, lingering bugs, and then finish off a nice, stable 1.4 release before the end of January). -Carl Snapshot 1.3.8 (2006-12-14 Carl Worth ) ========================================================== This is the fourth development snapshot in the 1.3 series. It comes just slightly more than one week after the 1.3.6 snapshot. After the bug fixes in 1.3.6, we're back to our original program of weekly snapshots, each one faster than the one from the week before. Cairo 1.3.8 brings a 2x improvement in the speed of rendering linear gradients (thanks to David Turner), and a significant reduction in X traffic when rendering text (thanks to Xan Lopez and Behdad Esfahbod), making cairo behave very much like Xft does. A few other things in the 1.3.8 snapshot worth noting include a more forgiving image comparator in the test suite, (using the "perceptual diff" metric and GPL implementation by Hector Yee[*]), a bug fix for broken linking on x86_64 (thanks to M Joonas Pihlaja) and an even better implementation of _cairo_lround, (not faster, but supporting a more complete input range), from Daniel Amelang. [*] http://pdiff.sourceforge.net/ Snapshot 1.3.6 (2006-12-06 Carl Worth ) ========================================================== This is the third development snapshot in the 1.3 series. It comes two weeks after the 1.3.4 snapshot. We don't have fancy performance charts this week as the primary changes in this snapshot are bug fixes. The performance work continues and the next snapshot (planned for one week from today) should include several improvements. The bug fixes in this snapshot include: * Fix undesirable rounding in glyph positioning (Dan Amelang) This bug was noticed by several users, most commonly by seeing improper text spacing or scrambled glyphs as drawn by nautilus. For example: Update to cairo-1.3.4 worsen font rendering https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=217819 * Fix reduced range of valid input coordinates to tessellator (M Joonas Pihlaja) This bug was causing lots of assertion failures in mozilla as mentioned here: CAIRO_BO_GUARD_BITS and coordinate space? http://lists.freedesktop.org/archives/cairo/2006-December/008743.html * Fix several regressions in new tessellator (M Joonas Pihlaja) Joonas just had a good eye for detail here. I don't think any external cairo users had noticed any of these bugs yet. * Fix compilation problems of cairo "wideint" code on some platforms (Mathieu Lacage) * Fix failed configure due to broken grep (Dan Amelang) This bug was reported here: AX_C_FLOAT_WORDS_BIGENDIAN doesn't work because grep doesn't work with binary file https://bugs.freedesktop.org/show_bug.cgi?id=9124 * Remove the pkg-config minimum version requirement (Behdad Esfahbod) Some systems ship with pkg-config 0.15 and there was really no good reason for cairo to insist on having version 0.19 before it would build. There is also one new (but inert) feature in this snapshot. There's a new option that can be passed to cairo's configure script: --disable-some-floating-point Disable certain code paths that rely heavily on double precision floating-point calculation. This option can improve performance on systems without a double precision floating-point unit, but might degrade performance on those that do. As of this snapshot, this option does not make any change to cairo, but it is possible that future versions of cairo will respect this option and change the implementation of various functions as appropriate. Snapshot 1.3.4 (2006-11-22 Carl Worth ) ========================================================== This is the second development snapshot in the 1.3 series. It comes one week after the 1.3.2 snapshot. This snapshot has a couple of significant performance improvements, and also adds new support for producing multi-page SVG output, (when targeting SVG 1.2)---thanks to Emmanuel Pacaud. The details of the performance improvements are as follows: 1. The long-awaited "new tessellator". The credit for this being an improvement goes to Joonas Pihlaja. He took my really slow code and really put it through its paces to get the dramatic performance improvement seen below (up to 38x faster on realistic cases, and more than 10x faster for the zrusin_another test). His own writeup of the work he did is quite thorough, but more than can be quoted here. Please see his post for the interesting details: http://lists.freedesktop.org/archives/cairo/2006-November/008483.html (Though note that this snapshot also includes some additional, significant improvements that were only sketched out in that email---see "Generating fewer trapezoids"). 2. More floating-point improvements Daniel Amelang continues to work the magic he began in the 1.3.2 snapshot. This time he short-circuits floating-point transformations by identity matrices and applies the earlier floating-to-fixed-point technique to the problem of rounding. The improvements here will primarily benefit text performance, and will benefit platforms without hardware floating-point more than those that have it, (some text tests show 20% improvement on an x86 machine and closer to 80% improvement on arm). The performance chart comparing 1.3.2 to 1.3.4 really speaks for itself, (this is on an x86 laptop). This is quite a lot of progress for one week: xlib-rgb stroke_similar_rgba_over-256 74.99 1.45% -> 2.03 68.38%: 36.86x speedup ███████████████████████████████████▉ xlib-rgb stroke_similar_rgba_source-256 78.23 1.43% -> 3.30 67.05%: 23.71x speedup ██████████████████████▊ xlib-rgba tessellate-256-100 820.42 0.15% -> 35.06 2.84%: 23.40x speedup ██████████████████████▍ image-rgba tessellate-256-100 819.55 0.32% -> 35.04 3.56%: 23.39x speedup ██████████████████████▍ xlib-rgb stroke_image_rgba_over-256 78.10 1.43% -> 4.33 65.56%: 18.04x speedup █████████████████ xlib-rgb stroke_image_rgba_source-256 80.11 1.63% -> 5.75 63.99%: 13.94x speedup █████████████ xlib-rgba zrusin_another_tessellate-415 89.22 0.35% -> 8.38 5.23%: 10.65x speedup █████████▋ image-rgba zrusin_another_tessellate-415 87.38 0.89% -> 8.37 5.22%: 10.44x speedup █████████▍ image-rgba zrusin_another_fill-415 117.67 1.34% -> 12.88 2.77%: 9.14x speedup ████████▏ xlib-rgba zrusin_another_fill-415 140.52 1.57% -> 15.79 2.88%: 8.90x speedup ███████▉ image-rgba tessellate-64-100 9.68 3.42% -> 1.42 0.60%: 6.82x speedup █████▉ xlib-rgba tessellate-64-100 9.78 4.35% -> 1.45 0.83%: 6.72x speedup █████▊ xlib-rgb stroke_linear_rgba_over-256 46.01 2.44% -> 7.74 54.51%: 5.94x speedup █████ xlib-rgb stroke_linear_rgba_source-256 48.09 2.15% -> 9.14 53.00%: 5.26x speedup ████▎ xlib-rgb stroke_radial_rgba_over-256 50.96 2.34% -> 12.46 47.99%: 4.09x speedup ███▏ xlib-rgb stroke_radial_rgba_source-256 53.06 1.57% -> 13.96 46.57%: 3.80x speedup ██▊ image-rgba paint_similar_rgba_source-256 0.12 1.57% -> 0.08 9.92%: 1.42x speedup ▍ image-rgba paint_image_rgba_source-256 0.12 2.49% -> 0.08 10.70%: 1.41x speedup ▍ image-rgba world_map-800 356.28 0.46% -> 275.72 1.15%: 1.29x speedup ▎ xlib-rgba world_map-800 456.81 0.39% -> 357.95 1.39%: 1.28x speedup ▎ image-rgb tessellate-16-100 0.09 0.57% -> 0.07 3.43%: 1.23x speedup ▎ image-rgba tessellate-16-100 0.09 0.06% -> 0.07 2.46%: 1.23x speedup ▎ image-rgba text_solid_rgb_over-256 5.39 4.01% -> 4.47 0.70%: 1.21x speedup ▎ image-rgba text_solid_rgba_over-256 5.37 0.82% -> 4.45 0.75%: 1.21x speedup ▎ image-rgba text_image_rgb_over-64 0.78 0.10% -> 0.65 0.74%: 1.20x speedup ▎ image-rgba text_image_rgba_over-64 0.78 0.29% -> 0.65 0.68%: 1.19x speedup ▎ image-rgb text_solid_rgb_over-64 0.76 2.45% -> 0.63 0.81%: 1.19x speedup ▎ image-rgba text_solid_rgba_over-64 0.76 0.33% -> 0.64 0.66%: 1.19x speedup ▎ image-rgba text_similar_rgba_over-256 5.99 4.72% -> 5.04 1.09%: 1.19x speedup ▎ We should point out that there is some potential for slowdown in this snapshot. The following are the worst slowdowns reported by the cairo performance suite when comparing 1.3.2 to 1.3.4: image-rgba subimage_copy-256 0.01 0.87% -> 0.01 3.61%: 1.45x slowdown ▌ xlib-rgb paint_solid_rgb_over-256 0.31 10.23% -> 0.38 0.33%: 1.26x slowdown ▎ image-rgba box-outline-fill-100 0.01 0.30% -> 0.01 2.52%: 1.21x slowdown ▎ image-rgba fill_solid_rgb_over-64 0.20 1.22% -> 0.22 1.59%: 1.12x slowdown ▏ image-rgb fill_similar_rgb_over-64 0.21 1.04% -> 0.24 1.06%: 1.11x slowdown ▏ image-rgba fill_image_rgb_over-64 0.21 1.19% -> 0.24 0.72%: 1.11x slowdown ▏ image-rgba fill_similar_rgb_over-64 0.21 0.18% -> 0.24 0.30%: 1.11x slowdown ▏ image-rgb fill_solid_rgba_over-64 0.22 1.66% -> 0.24 1.15%: 1.11x slowdown ▏ image-rgb fill_image_rgb_over-64 0.21 0.14% -> 0.24 0.80%: 1.11x slowdown ▏ image-rgba fill_image_rgba_over-64 0.22 1.34% -> 0.25 0.20%: 1.11x slowdown ▏ image-rgba fill_solid_rgba_over-64 0.22 1.48% -> 0.24 0.95%: 1.11x slowdown ▏ image-rgb fill_similar_rgba_over-64 0.22 1.13% -> 0.25 1.25%: 1.10x slowdown ▏ The 45% slowdown for subimage_copy is an extreme case. It's unlikely to hit many applications unless they often use cairo_rectangle; cairo_fill to copy a single pixel at a time. In any case, it shows a worst-case impact of the overhead of the new tessellator. The other slowdowns (~ 10%) are probably more realistic, and still very concerning. We will work to ensure that performance regressions like these are not present from one major release of cairo to the next, (for example, from 1.2 to 1.4). But we're putting this 1.3.4 snapshot out there now, even with this potential slowdown so that people can experiment with it. If you've got complex geometry, we hope you will see some benefit from the new tessellator. If you've got primarily simple geometry, we hope things won't slowdown too much, but please let us know what slowdown you see, if any, so we can calibrate our performance suite against real-world impacts. Thanks, and have fun with cairo! Snapshot 1.3.2 (2006-11-14 Carl Worth ) ========================================================== This is the first development snapshot since the 1.2 stable series branched off shortly after the 1.2.4 release in August 2006. This snapshot includes all the bug fixes from the 1.2.6 release, (since they originated here on the 1.3 branch first and were cherry-picked over to 1.2). But more importantly, it contains some new API in preparation for a future 1.4 release, and most importantly, it contains several performance improvements. The bug fixes will not be reviewed here, as most of them are already described in the 1.2.6 release notes. But details for the new API and some performance improvements are included here. As with all snapshots, this is experimental code, and the new API added here is still experimental and is not guaranteed to appear unchanged in any future release of cairo. API additions ------------- Several new API additions are available in this release. There is a common theme among all the additions in that they allow cairo to advertise information about its state that it was refusing to volunteer earlier. So this isn't groundbreaking new functionality, but it is essential for easily achieving several tasks. The new functions can be divided into three categories: Getting information about the current clip region ------------------------------------------------- cairo_clip_extents cairo_copy_clip_rectangles cairo_rectangle_list_destroy Getting information about the current dash setting -------------------------------------------------- cairo_get_dash_count cairo_get_dash Getting information from a pattern ---------------------------------- cairo_pattern_get_rgba cairo_pattern_get_surface cairo_pattern_get_color_stop_rgba cairo_pattern_get_color_stop_count cairo_pattern_get_linear_points cairo_pattern_get_radial_circles In each of these areas, we have new API for providing a list of uniform values from cairo. The closest thing we had to this before was cairo_copy_path, (which is rather unique in providing a list of non-uniform data). The copy_clip_rectangles/rectangle_list_destroy functions follow a style similar to that of cairo_copy_path. Meanwhile, the dash and pattern color stop functions introduce a new style in which there is a single call to return the number of elements available (get_dash_count and get_color_stop_count) and then a function to be called once to get each element (get_dash and get_color_stop_rgba). I'm interested in hearing feedback from users of these new API functions, particularly from people writing language bindings. One open question is whether the clip "getter" functionality should adopt a style similar to that of the new dash and color_stop interfaces. API deprecation --------------- The CAIRO_FORMAT_RGB16_565 enum value has been deprecated. It never worked as a format value for cairo_image_surface_create, and it wasn't necessary for supporting 16-bit 565 X server visuals. XCB backend changes ------------------- The XCB backend has been updated to track the latest XCB API (which recently had a 1.0 release). New quartz backend ------------------ Vladimir Vukicevic has written a new "native quartz" backend which will eventually replace the current "image-surface wrapping" quartz backend. For now, both backends are available, (the old one is "quartz" and the new one is "nquartz"). But it is anticipated that the new backend will replace the old one and take on the "quartz" name before this backend is marked as supported in a release of cairo. New OS/2 backend ---------------- Doodle and Peter Weilbacher have contributed a new, experimental backend for using cairo on OS/2 systems. Performance improvements ------------------------ Here are some highlights from cairo's performance suite showing improvements from cairo 1.2.6 to cairo 1.3.2. The command used to generate this data is: ./cairo-perf-diff 1.2.6 HEAD available in the perf/ directory of a recent checkout of cairo's source, (the cairo-perf-diff script does require a git checkout and will not work from a tar file---though ./cairo-perf can still be used to generate a single report there and ./cairo-perf-diff-files can be used to compare two reports). Results are described below both for an x86 laptop (with an old Radeon video card, recent X.org build, XAA, free software drivers), as well as for a Nokia 770. First the x86 results with comments on each, (all times are reported in milliseconds). Copying subsets of an image surface to an xlib surface (much faster) -------------------------------------------------------------------- xlib-rgba subimage_copy-512 10.50 -> : 53.97x speedup █████████████████████████████████████████████████████ Thanks to Christopher (Monty) Montgomery for this big performance improvement. Any application which has a large image surface and is copying small pieces of it at a time to an xlib surface, (imagine an application that loads a single image containing all the "sprites" for that application), will benefit from this fix. The larger the ratio of the image surface to the portion being copied, the larger the benefit. Floating-point conversion (3x faster) ------------------------------------- xlib-rgba pattern_create_radial-16 27.75 -> 3.93 : 2.94x speedup ██ image-rgb pattern_create_radial-16 26.06 -> 3.74 : 2.90x speedup █▉ Thanks to Daniel Amelang, (and others who had contributed the idea earlier), for this nice improvement in the speed of converting floating-point values to fixed-point. Text rendering (1.3 - 2x faster) ------------------------------ xlib-rgba text_image_rgba_source-256 319.73 -> 62.40 : 2.13x speedup █▏ image-rgb text_solid_rgba_over-64 2.85 -> 0.88 : 1.35x speedup ▍ I don't think we've ever set out to improve text performance specifically, but we did it a bit anyway. I believe the extra improvement in the xlib backend is due to Monty's image copying fix above, and the rest is due to the floating-point conversion speedup. Thin stroke improvements (1.5x faster) --------------------------------------------- image-rgb world_map-800 1641.09 -> 414.77 : 1.65x speedup ▋ xlib-rgba world_map-800 1939.66 -> 529.94 : 1.52x speedup ▌ The most modest stuff to announce in this release is the 50% improvement I made in the world_map case. This is in improvement that should help basically anything that is doing strokes with many straight line segments, (and the thinner the better, since that makes tessellation dominate rasterization). The fixes here are to use a custom quadrilateral tessellator rather than the generic tessellator for straight line segments and the miter joins. Performance results from the Nokia 770 -------------------------------------- xlib-rgba subimage_copy-512 55.88 -> 2.04 : 27.34x speedup ██████████████████████████▍ xlib-rgb text_image_rgb_over-256 1487.58 -> 294.43 : 5.05x speedup ████ image-rgb pattern_create_radial-16 187.13 -> 91.86 : 2.04x speedup █ xlib-rgba world_map-800 21261.41 -> 15628.02 : 1.36x speedup ▍ Here we see that the subimage_copy improvement was only about half as large as the corresponding improvement on my laptop, (27x faster compared to 54x) and the floating-point conversion fix also was quite as significant, (2x compared to 3x). Oddly the improvement to text rendering performance was more than twice as good (5x compared to 2x). I don't know what the reason for that is, but I don't think it's anything anybody should complain about. Release 1.2.6 (2006-11-02 Behdad Esfahbod ) ============================================================== This is the third bug fix release in the 1.2 series, coming less than two months after the 1.2.4 release made on August 18. The 1.2.4 release turned out to be a pretty solid one, except for a crasher bug when forwarding an X connection where the client and the server have varying byte orders, eg. from a PPC to an i686. Other than that, various other small bugs have been fixed. Various improvements have been made in the testing infrastructure to prevent false positives, and to make sure the generated cairo shared object behaves as expected in terms of exported symbols and relocations. There were a total of 89 changes since 1.2.4. The following list the most important ones: Common fixes ------------ - Avoid unsigned loop control variable to eliminate infinite, memory-scribbling loop. (#7593) - Fix cairo_image_surface_create to report INVALID_FORMAT errors. Previously the detected error was being lost and a nil surface was returned that erroneously reported CAIRO_STATUS_NO_MEMORY. - Change _cairo_color_compute_shorts to not rely on any particular floating-point epsilon value. (#7497) - Fix infinite-join test case (bug #8379) - Pass correct surface to create_similar in _cairo_clip_init_deep_copy(). PS/PDF fixes ------------ - Fix Type 1 embedding in PDF. - Correct the value of /LastChar in the PDF Type 1 font dictionary. - Improve error checking in TrueType subsetting. - Compute right index when looking up left side bearing. (bug #8180) - Correct an unsigned to signed conversion problem in truetype subsetting bbox. - Type1 subsetting: Don't put .notdef in Encoding when there are 256 glyphs. - Add cairo version to PS header / PDF document info dictionary. - Set CTM before path construction. Win32 fixes ----------- - Get correct unhinted outlines on win32. (bug 7603) - Make cairo as a win32 static library possible. - Use CAIRO_FORMAT_RGB24 for BITSPIXEL==32 surfaces too. Build system fixes ------------------ - Define WINVER if it's not defined. (bug 6456) - Fix the AMD64 final link by removing SLIM from pixman. - Misc win32 compilation fixes. - Add Sun Pro C definition of pixman_private. - Use pixman_private consistently as prefix not suffix. - Added three tests check-plt.sh, check-def.sh, and check-header.sh that check that the shared object, the .def file, and the public headers agree about the exported symbols. - Require pkg-config 0.19. (#8686) Release 1.2.4 (2006-08-18 Carl Worth ) ========================================================= This is the second bug fix release in the 1.2 series, coming less than two weeks after the 1.2.2 release made on August 8. The big motivation for a quick release was that there were a log of build system snags that people ran into with the 1.2.2 release. But, by the time we got those all done, we found that we had a bunch of fixes for cairo's rendering as well. So there's a lot of goodness in here for such a short time period. Rendering fixes --------------- Fix image surfaces to not be clipped when used as a source (Vladimir Vukicevic) http://gitweb.freedesktop.org/?p=cairo;a=commit;h=72e25648c4c4bc82ddd938aa4e05887a293f0d8b Fix a couple of corner cases in dashing degenerate paths (Jeff Muizelaar) http://gitweb.freedesktop.org/?p=cairo;a=commit;h=fbb1758ba8384650157b2bbbc93d161b0c2a05f0 Fix support for type1 fonts on win32 (Adrian Johnson) http://gitweb.freedesktop.org/?p=cairo;a=commit;h=da1019c9138695cb838a54f8b871bbfd0e8996d7 Fix assertion failure when rotating bitmap fonts (Carl Worth) http://gitweb.freedesktop.org/?p=cairo;a=commit;h=0bfa6d4f33b8ddb5dc55bbe419c15df4af856ff9 Fix assertion failure when calling cairo_text_path with bitmap fonts (Carl Worth) http://gitweb.freedesktop.org/?p=cairo;a=commit;h=9878a033531e6b96b5f27e69e10e90dee7440cd9 Fix mis-handling of cairo_close_path in some situations (Tim Rowley, Carl Worth) http://gitweb.freedesktop.org/?p=cairo;a=commit;h=53f74e59faf1af78f2f0741ccf1f23aa5dad4efc Respect font_matrix translation in _cairo_gstate_glyph_path (Behdad Esfahbod) http://gitweb.freedesktop.org/?p=cairo;a=commit;h=f183b835b111d23e838889178aa8106ec84663b3 Fix vertical metrics adjustment to work with non-identity shapes (Behdad Esfahbod) http://gitweb.freedesktop.org/?p=cairo;a=commit;h=b7bc263842a798d657a95e539e1693372448837f [PS] Set correct ImageMatrix in _cairo_ps_surface_emit_bitmap_glyph_data (Behdad Esfahbod) http://gitweb.freedesktop.org/?p=cairo;a=commit;h=d47388ad759b0a1a0869655a87d9b5eb6ae2445d Build system fixes ------------------ Fix xlib detection to prefer pkg-config to avoid false libXt dependency (Behdad Esfahbod) http://gitweb.freedesktop.org/?p=cairo;a=commit;h=0e78e7144353703cbd28aae6a67cd9ca261f1d68 Fix typos causing win32 build problem with PS,PDF, and SVG backends (Behdad Esfahbod) http://gitweb.freedesktop.org/?p=cairo;a=commit;h=aea83b908d020e26732753830bb3056e6702a774 Fix configure cache to not use stale results (Behdad Esfahbod) http://gitweb.freedesktop.org/?p=cairo;a=commit;h=6d0e3260444a2d5b6fb0cb223ac79f1c0e7b3a6e Fix to not pass unsupported warning options to the compiler (Jens Granseuer) http://gitweb.freedesktop.org/?p=cairo;a=commit;h=97524a8fdb899de1ae4a3e920fb7bda6d76c5571 Fix to allow env. variables such as png_REQUIRES to override configure detection (Jens Granseuer) http://gitweb.freedesktop.org/?p=cairo;a=commit;h=abd16e47d6331bd3811c908e524b4dcb6bd23bf0 Fix test suite to not use an old system cairo when converting svg2png (Behdad Esfahbod) http://gitweb.freedesktop.org/?p=cairo;a=commit;h=6122cc85c8f71b1ba2df3ab86907768edebe1781 Fix test suite to not require signal.h to be present (Behdad Esfahbod) http://gitweb.freedesktop.org/?p=cairo;a=commit;h=6f8cf53b1e1ccdbe1ab6a275656b19c6e5120e40 Code cleanups ------------- Many useful warnings cleanups from sparse, valgrind, and careful eyes (Kjartan Maraas, Pavel Roskin) Release 1.2.2 (2006-08-08 Carl Worth ) ========================================================= This is the first bug fix release in the 1.2 series since the original 1.2.0 release made six weeks ago. There were some very serious bugs in the 1.2.0 release, (see below), so everybody is encouraged to upgrade from 1.2.0 to 1.2.2. The 1.2.2 release maintains source and binary compatibility with 1.2.0 and does not make any API additions. Fix crashes with BGR X servers ------------------------------ With cairo 1.2.0 many people reported problems with all cairo-using programs, (including all GTK+ programs with GTK+ >= 2.8) immediately crashing with a complaint about an unsupported image format. This bug affected X servers that do not provide the Render extension and that provide a visual with BGR rather than RGB channel order. report: https://bugs.freedesktop.org/show_bug.cgi?id=7294 fix: http://gitweb.freedesktop.org/?p=cairo;a=commit;h=9ae66174e774b57f16ad791452ed44efc2770a59 Fix the "disappearing text" bug ------------------------------- With cairo 1.2.0 many people reported that text would disappear from applications, sometimes reappearing with mouse motion or selection. The text would disappear after the first space in a string of text. This bug was caused by an underlying bug in (very common) X servers, and only affected text rendered without antialiasing, (either a bitmap font or a vector font with antialiasing disabled). The bug was also exacerbated by a KDE migration bug that caused antialiasing to be disabled more than desired. report: https://bugs.freedesktop.org/show_bug.cgi?id=7494 fix: http://gitweb.freedesktop.org/?p=cairo;a=commit;h=456cdb3058f3b416109a9600167cd8842300ae14 see also: Xorg: https://bugs.freedesktop.org/show_bug.cgi?id=7681 KDE: http://qa.mandriva.com/show_bug.cgi?id=23990 Fix broken image fallback scaling (aka. "broken printing") ---------------------------------------------------------- The various "print" backends, (pdf, ps, and svg), sometimes fallback to using image-based rendering for some operations. In cairo 1.2.0 these image fallbacks were scaled improperly. Applications using cairo can influence the resolution of the image fallbacks with cairo_surface_set_fallback_resolution. With the bug, any value other than 72.0 would lead to incorrect results, (larger values would lead to increasingly shrunken output). report: https://bugs.freedesktop.org/show_bug.cgi?id=7533 fix: http://gitweb.freedesktop.org/?p=cairo;a=commit;h=1feb4291cf7813494355459bb547eec604c54ffb Fix inadvertent semantic change of font matrix translation (Behdad Esfahbod) ---------------------------------------------------------------------------- The 1.2.0 release introduced an inadvertent change to how the translation components of a font matrix are interpreted. In the 1.0 series, font matrix translation could be used to offset the glyph origin, (though glyph metrics were reported incorrectly in 1.0). However in 1.2.0, the translation was applied to the advance values between each glyph. The 1.2.0 behavior is fairly useless in practice, and it was not intentional to introduce a semantic change. With 1.2.2 we return to the 1.0 semantics, with a much better implementation that provides correct glyph metrics. fix: http://gitweb.freedesktop.org/?p=cairo;a=commit;h=84840e6bba6e72aa88fad7a0ee929e8955ba9051 Fix create_similar to preserve fallback resolution and font options (Behdad Esfahbod) ------------------------------------------------------------------------------------- There has been a long-standing issue with cairo_surface_create_similar such that font options and other settings from the original destination surface would not be preserved to the intermediate "similar" surface. This could result in incorrect rendering (particularly with respect to text hinting/antialiasing) with fallbacks, for example. report: https://bugs.freedesktop.org/show_bug.cgi?id=4106 fixes: http://gitweb.freedesktop.org/?p=cairo;a=commit;h=9fcb3c32c1f16fe6ab913e27eb54d18b7d9a06b0 http://gitweb.freedesktop.org/?p=cairo;a=commit;h=bdb4e1edadb78a2118ff70b28163f8bd4317f1ec xlib: Fix text performance regression from 1.0 to 1.2.0 (Vladimir Vukicevic) ---------------------------------------------------------------------------- Several people noticed that upgrading from cairo 1.0 to cairo 1.2.0 caused a significant performance regression when using the xlib backend. This performance regression was particularly noticeable when doing lots of text rendering and when using a high-latency connection to the X server, (such as a remote X server over an ssh connection). The slowdown was identified and fixed in 1.2.2. report: https://bugs.freedesktop.org/show_bug.cgi?id=7514 fix: http://gitweb.freedesktop.org/?p=cairo;a=commit;h=b7191885c88068dad57d68ced69a752d1162b12c PDF: Eliminate dependency on FreeType library dependency (Adrian Johnson) ------------------------------------------------------------------------- The cairo 1.2 series adds a supported pdf backend to cairo. In cairo 1.2.0 this backend required the freetype library, which was an undesirable dependency on systems such as win32, (cairo is designed to always prefer the "native" font system). As of cairo 1.2.2 the freetype library is not required to use the pdf backend on the win32 platform. report: https://bugs.freedesktop.org/show_bug.cgi?id=7538 fix: http://gitweb.freedesktop.org/?p=cairo;a=commit;h=a0989f427be87c60415963dd6822b3c5c3781691 PDF: Fix broken output on amd64 (Adrian Johnson) ------------------------------------------------ report: http://bugzilla.gnome.org/show_bug.cgi?id=349826 fix: http://gitweb.freedesktop.org/?p=cairo;a=commit;h=f4b12e497b7ac282b2f6831b8fb68deebc412e60 PS: Fix broken output for truetype fonts > 64k (Adrian Johnson) --------------------------------------------------------------- fix: http://gitweb.freedesktop.org/?p=cairo;a=commit;h=067d97eb1793a6b0d0dddfbd0b54117844511a94 PDF: Fix so that dashing doesn't get stuck on (Kent Worsnop) ------------------------------------------------------------ Kent notices that with the PDF backend in cairo 1.2.0 as soon as a stroke was performed with dashing, all subsequent strokes would also be dashed. There was no way to turn dashing off again. fix: http://gitweb.freedesktop.org/?p=cairo;a=commit;h=778c4730a86296bf0a71080cf7008d7291792256 Fix memory leaks in failure paths in gradient creation (Alfred Peng) -------------------------------------------------------------------- fix: http://gitweb.freedesktop.org/?p=cairo;a=commit;h=db06681b487873788b51a6766894fc619eb8d8f2 Fix memory leak in _cairo_surface_show_glyphs (Chris Wilson) ------------------------------------------------------------ report: https://bugs.freedesktop.org/show_bug.cgi?id=7766 fix: http://gitweb.freedesktop.org/?p=cairo;a=commit;h=e2fddcccb43d06486d3680a19cfdd5a54963fcbd Solaris: Add definition of cairo_private for some Sun compilers (Alfred Peng) ----------------------------------------------------------------------------- report: https://bugzilla.mozilla.org/show_bug.cgi?id=341874 fix: http://gitweb.freedesktop.org/?p=cairo;a=commit;h=04757a3aa8deeff3265719ebe01b021638990ec6 Solaris: Change version number of Sun's Xorg server with buggy repeat (Brian Cameron) ------------------------------------------------------------------------------------- report: https://bugs.freedesktop.org/show_bug.cgi?id=7483 fix: http://gitweb.freedesktop.org/?p=cairo;a=commit;h=e0ad1aa995bcec4246c0b8ab0d5a5a79871ce235 Various memory leak fixes ------------------------- Fix memory leak in _cairo_surface_show_glyphs (bug 7766) Fix file handle leak in failure path (bug 7616) Fix some memory leaks in the test cases. Fix some memory leaks in font subsetting code used in print backends. Documentation improvements (Behdad Esfahbod) -------------------------------------------- Added new documentation for several functions (cairo_show_page, cairo_copy_page, cairo_in_stroke, cairo_in_fill). Fixed some syntax errors that were preventing some existing documentation from being published. Fixed several minor typographical errors. Added an index for new symbols in 1.2. Release 1.2.0 (2006-06-27 Carl Worth ) ========================================================= This is the culmination of the work that has gone on within the 1.1 branch of cairo. There has been one API addition since the cairo 1.1.10 snapshot: cairo_xlib_surface_get_width cairo_xlib_surface_get_height There's also a new feature without any API change: Dots can now be drawn by using CAIRO_LINE_CAP_ROUND with degenerate sub-paths, (cairo_move_to() followed by either cairo_close_path() or a cairo_line_to() to the same location). And at least the following bugs have been fixed: 6759 fontconfig option AntiAlias doesn't work in cairo 1.1.2 6955 Some characters aren't displayed when using xlib (cache u... 7268 positive device_offset values don't work as source * PDF emit_glyph function needs to support bitmapped glyphs * PS emit_glyph function needs to support bitmapped glyphs * SVG emit_glyph function needs to support bitmapped glyphs * PDF: minefield page one is falling back unnecessarily * PS/PDF: Fix broken placement for vertical glyphs * PS: Fix to not draw BUTT-capped zero-length dash segments * Do device offset before float->fixed conversion http://bugzilla.gnome.org/show_bug.cgi?id=332266 * PS: Fix source surfaces with transformations * PS: Fix to not draw BUTT-capped degnerate sub-paths * PS: Don't walk off end of array when printing "~>" * Fix some memory leaks in the test suite rig * SVG: Fix memory leak when using cairo_mask * Fix EXTEND_REFLECT and EXTEND_PAD to not crash (though these are still not yet fully implemented for surface patterns). This has been a tremendous effort by everyone, and I'm proud to have been a part of it. Congratulations to all contributors to cairo! Snapshot 1.1.10 (2006-06-16 Carl Worth ) =========================================================== This is the fifth in a series of snapshots working toward the 1.2 release of cairo. The primary motivation for this snapshot is to fix a long-standing bug that had long been silent, but as of the 1.1.8 snapshot started causing crashes when run against 16-bit depth X servers, (often Xvnc or Xnest). The fix for this adds a new CAIRO_FORMAT_RGB16_565 to the API. This snapshot also includes a rewrite of cairo's SVG backend to eliminate the dependency on libxml2. With this in place, cairo 1.2 will not depend on any libraries that cairo 1.0 did not. As usual, there are also a few fixes for minor bugs. Snapshot 1.1.8 (2006-06-14 Carl Worth ) ========================================================== This is the fourth in a series of snapshots working toward the 1.2 release of cairo. At this point, all major features of the 1.2 release are in place, leaving just a few bug fixes left. In particular, there well be no additional API changes between this 1.1.8 snapshot and the 1.2 release. The announcement for 1.1.6 mentioned several API changes being considered. Only one of these changes was actually implemented (set_dpi -> fallback_resolution). This change does introduce one source-level incompatibility with respect to previous 1.1.x snapshots, so see below for details. Here is an abbreviated summary of changes since the 1.1.6 snapshot: ** API Change ** ---------------- According to the plan mentioned in the 1.1.6 notes, one source-level incompatible change has been implemented. The following three functions have been removed from cairo's API: cairo_pdf_surface_set_dpi cairo_ps_surface_set_dpi cairo_svg_surface_set_dpi and in their place the following function has been added: cairo_surface_set_fallback_resolution The signature and semantics of the function remains the same, so it is a simple matter of changing the name of the function when calling it. As a transition mechanism, this snapshot will (on many systems) build to include the old symbols so that code previously compiled will still run. However, all source code using the old names must be updated before it will compile. And the upcoming 1.2 release is not anticipated to include the old symbols. Finally, it should be pointed out that the old symbols never existed in the supported API of any stable release of cairo. (In the stable 1.0 releases the PDF, PS, and SVG backends were advertised as experimental and unstable.) And, as always, cairo continues to maintain source and binary compatibility between major releases. So applications compiled against supported backends in a stable release of cairo (1.0.4 say) will continue to compile and run without modification against new major releases (1.2.0 say) without modification. API additions ------------- The following new functions have been added to cairo's API: cairo_surface_get_content cairo_debug_reset_static_data cairo_image_surface_get_data cairo_image_surface_get_format cairo_image_surface_get_stride cairo_win32_font_face_create_for_hfont New, backend-specific pkg-config files -------------------------------------- In addition to the original cairo.pc file, cairo will also now install a pkg-config files for each configured backend, (for example cairo-pdf.pc, cairo-svg.pc, cairo-xlib.pc, cairo-win32.pc, etc.) this also includes optional font backends (such as cairo-ft.pc) and the optional png functionality (cairo-png.pc). These new pkg-config files should be very convenient for allowing cairo-using code to easily check for the existing of optional functionality in cairo without having to write complex rules to grub through cairo header files or the compiled library looking for symbols. Printing backend (PS, PDF, and SVG) ----------------------------------- Improving the quality of the "printing" backends has been a priority of the development between cairo 1.1.6 and cairo 1.1.8. The big improvement here is in the area of text output. Previously, at best, text was output as paths without taking advantage of any font support available in the output file format. Now, at the minimum text paths will be shared by using type3 fonts (for PS and PDF---and similarly, defs for SVG). Also, if possible, type3 and truetype fonts will be embedded in PostScript and PDF output. There are still some known bugs with this, (for example, selecting text in a cairo-generated PDF file with an embedded truetype font does not work). So there will be some more changes in this area before cairo 1.2, but do try test this feature out as it exists so far. Many thanks to Kristian Høgsberg for the truetype and type1 font embedding. win32 backend ------------- Performance improvements by preferring GDI over pixman rendering when possible. Fixes for text rendering. xlib backend ------------ Fix potentially big performance bug by making xlib's create_similar try harder to create a pixmap of a depth matching that of the screen. Bug fixes --------- Among various other fixes, the following bugs listed in bugzilla have been fixed: Bug 2488: Patch to fix pixman samping location bug (#2488). https://bugs.freedesktop.org/show_bug.cgi?id=2488 Bug 4196: undef MIN an MAX before defining to avoid duplicate definition https://bugs.freedesktop.org/show_bug.cgi?id=4196 Bug 4723: configure.in: Fix m4 quoting when examining pkg-config version https://bugs.freedesktop.org/show_bug.cgi?id=4723 Bug 4882: Flag Sun's X server has having buggy_repeat. https://bugs.freedesktop.org/show_bug.cgi?id=4882 Bug 5306: test/pdf2png: Add missing include of stdio.h https://bugs.freedesktop.org/show_bug.cgi?id=5306 Bug 7075: Fix make clean to remove cairo.def https://bugs.freedesktop.org/show_bug.cgi?id=7075 (Many thanks to Behdad Esfahbod for helping us track down and fix many of these.) Snapshot 1.1.6 (2006-05-04 Carl Worth ) ========================================================== This is the third in a series of snapshots working toward the imminent 1.2 release of cairo. For a list of items still needing work on the cairo 1.2 roadmap, please see: http://cairographics.org/ROADMAP As can be seen in that list, there are no longer any API additions left on the roadmap. Instead, there is a feature (PDF type 3 fonts) a performance optimization (X server gradients) and a list of bug fixes. This gives us a fair amount of freedom to cut the 1.2 release at almost any point by deciding to defer remaining bug fixes to subsequent maintenance releases such as 1.2.2 and 1.2.4. Before we will do that, we must first be wiling to commit to all the new API additions. As a heads-up, there are a couple of potential API changes being considered. (Note that these are changes to new API introduced during 1.1 so these will not introduce API incompatibilities compared to the stable 1.0 series). The changes being considered are: cairo_get_group_target: may acquire x and y offset return parameters. May also be eliminated in favor of cairo_get_target assuming its role cairo_pdf_surface_set_dpi: cairo_ps_surface_set_dpi: cairo_svg_surface_set_dpi: These functions may be removed in favor of a new cairo_surface_set_fallback_resolution Additionally there is the possibility of a slight change in the semantics of cairo_set_line_width. We believe the current behavior of the sequence: cairo_set_line_width; ... change CTM ...; cairo_stroke; is buggy. It is currently behaving the same as: ... change CTM ...; cairo_set_line_width; cairo_stroke; We are considering fixing this bug before 1.2 with the hope that nobody is already relying on the buggy behavior described here. Do shout if you suspect you might be in that position. The items included in this snapshot (since the 1.1.4 snapshot) are described below. API additions ------------- The long-awaited group-rendering support is now available with the following function calls: cairo_push_group cairo_push_group_with_content cairo_pop_group cairo_pop_group_to_source cairo_get_group_target This API provides a much more convenient mechanism for doing rendering to an intermediate surface without the need to manually create a temporary cairo_surface_t and a temporary cairo_t and clean them up afterwards. Add the following missing get function to complement cairo_surface_set_device_offset: cairo_surface_get_device_offset PDF backend (API addition) -------------------------- The PDF backend now provides for per-page size changes, (similar to what the PostScript backend got in the 1.1.4 snapshot). The new API is: cairo_pdf_surface_set_size Xlib backend (API additions) ---------------------------- The following functions have been added to allow the extraction of Xlib surface: cairo_xlib_surface_get_display cairo_xlib_surface_get_drawable cairo_xlib_surface_get_screen cairo_xlib_surface_get_visual cairo_xlib_surface_get_depth XCB backend (experimental) -------------------------- Update backend so that it now compiles with the recent XCB 0.9 release. Bug fixes and memory leak cleanup --------------------------------- Various little things, nothing too significant though. Snapshot 1.1.4 (2006-05-03 Carl Worth ) ========================================================== This is the second in a series of snapshots working toward the upcoming 1.2 release of cairo. For a list of items still needing work on the cairo 1.2 roadmap, please see: http://cairographics.org/ROADMAP The items included in this snapshot (since the 1.1.2 snapshot) are described below. PostScript backend: new printing-oriented API --------------------------------------------- We anticipate that with cairo 1.2, toolkits will begin to use cairo for printing on systems that use PostScript as the spool format. To support this use case, we have added 4 new function calls that are specific to the PostScript backend: cairo_ps_surface_set_size cairo_ps_surface_dsc_comment cairo_ps_surface_dsc_begin_setup cairo_ps_surface_dsc_begin_page_setup These functions allow variation of the page size/orientation from one page to the next in the PostScript output. They also allow the toolkit to provide per-document and per-page printer control options in a device-independent way, (for example, by using PPD options and emitting them as DSC comments into the PostScript output). This should allow toolkits to provide very fine-grained control of many options available in printers, (media size, media type, tray selection, etc.). SVG backend: builds by default, version control ----------------------------------------------- The SVG backend continues to see major improvements. It is expected that the SVG backend will be a supported backend in the 1.2 release. This backend will now be built by default if its dependencies (freetype and libxml2) are met. Additionally, the SVG backend now has flexibility with regard to what version of SVG it targets. It will target SVG 1.1 by default, which will require image fallbacks for some of the "fancier" cairo compositing operators. Or with the following new function calls: cairo_svg_surface_restrict_to_version cairo_svg_get_versions cairo_svg_version_to_string it can be made to target SVG 1.2 in which there is native support for these compositing operators. Bug fixes --------- At least the following bugs have been fixed since the 1.1.2 snapshot: crash at XRenderAddGlyphs https://bugs.freedesktop.org/show_bug.cgi?id=4705 Can't build cairo-1.1.2 on opensolaris due to " void function cannot return value" https://bugs.freedesktop.org/show_bug.cgi?id=6792 Missing out-of-memory check at gfx/cairo/cairo/src/cairo-atsui-font.c:185 https://bugzilla.mozilla.org/show_bug.cgi?id=336129 A couple of memory leaks. Snapshot 1.1.2 (2006-04-25 Carl Worth ) ========================================================== This is the first in a series of snapshots working toward the upcoming 1.2 release of cairo. (Subsequent snapshot will use successive even numbers for the third digit, 1.1.4, 1.1.6, etc.) This snapshot is backwards-compatible with the 1.0 series---it makes a few API additions but does not remove any API. PostScript and PDF backends are no longer "experimental" -------------------------------------------------------- The major theme of the 1.2 release is improved PostScript and PDF backends for cairo. Unlike the 1.0 series, in the 1.2 series these backends will not be marked as experimental and will be enabled by default. We encourage people to test this snapshot and the PS/PDF backends in particular as much as possible. The PostScript and PDF output is not yet ideal. * One major problem with the PostScript output is that image fallbacks are used more often than strictly necessary, and the image fallbacks are at a lower resolution than desired, (the cairo_ps_surface_set_dpi call is ignored). * The major drawback of the current PDF backend implementation is its text support. Every glyph is represented by a filled path in the PDF file. The causes file sizes to be much larger and rendering to be much slower than desired. It is anticipated that both of these shortcomings will see some improvements before the final 1.2 release. In spite of those shortcomings, we hope that the PS and PDF backends will yield faithful results for pretty much any cairo operations you can throw at them. Please let us know if you are getting obviously "different" results from the PS/PDF backends than from the image or xlib backends. Other new experimental backends ------------------------------- This snapshot includes three new backends that did not exist in the 1.0 series: * beos backend * directfb backend * svg backend These are all currently marked "experimental" and are disabled by default. But the SVG backend in particular has seen a lot of recent development and is very close to passing the entire cairo test suite. It is possible that this backend will become a fully supported backend by the time of the cairo 1.2 release. Public API additions -------------------- There have been a few new API functions added to cairo, including: New get_type functions for querying sub-types of object: cairo_surface_get_type cairo_pattern_get_type cairo_font_face_get_type cairo_scaled_font_get_type More convenience in working with cairo_scaled_font_t with new getter functions: cairo_scaled_font_get_font_face cairo_scaled_font_get_font_matrix cairo_scaled_font_get_ctm cairo_scaled_font_get_font_options As well as a convenience function for setting a scaled font into a cairo context: cairo_set_scaled_font and a function to allow text extents to be queried directly from a scaled font, (without requiring a cairo_surface_t or a cairo_t): cairo_scaled_font_text_extents These new scaled font functions were motivated by the needs of the pango library. Finally, a new path-construction function was added which clears the current point in preparation for a new sub path. This makes cairo_arc easier to use in some situations: cairo_new_sub_path Before the 1.2 release is final we do still plan a few more API additions specifically motivated by the needs of Mozilla/Firefox. Optimizations and bug fixes --------------------------- Shortly after the 1.0 maintenance series branched off the mainline there was a major rework of the cairo font internals. This should provide some good performance benefits, but it's also another area people should look at closely for potential regressions. There has not yet been any widespread, systematic optimization of cairo, but various performance improvements have been made, (and some of them are fairly significant). So if some things seem faster than 1.0 then things are good. If there are any performance regressions compared to 1.0 then there is a real problem and we would like to hear about that. There has been a huge number of bug fixes---too many to mention in detail. Again, things should be better, and never worse compared to 1.0. Please let us know if your testing shows otherwise. Release 1.0.2 (2005-10-03 Carl Worth ) ========================================================= For each bug number XXXX below, see: https://bugs.freedesktop.org/show_bug.cgi?id=XXXX for more details. General bug fixes ----------------- * 4408 - Add support for dashing of stroked curves (Carl Worth) * 4409 - Fix dashing so that each dash is capped on both ends (Carl Worth) * 4414 - Prevent SIGILL failures (proper use of -mmmx and -msse flags) (Sebastien Bacher, Billy Biggs) * 4299 - Fix crashes with text display in multi-threaded program (Alexey Shabalin, Carl Worth) * 4401 - Do not use sincos function since it is buggy on some platforms) (Tim Mooney, Carl Worth) * 4245 - Fix several bugs in the test suite exposed by amd64 systems (Seemant Kulleen, Carl Worth) * 4321 - Add missing byteswapping on GetImage/PutImage (Sjoerd Simons, Owen Taylor) * 4220 - Make the check for rectangular trapezoids simpler and more accurate (Richard Stellingwerff, Owen Taylor) * 4260 - Add missing channel-order swapping for antialised fonts (Barbie LeVile, Owen Taylor) * 4283 - Fix compilation failure with aggressive inlining (gcc -O3) (Marco Manfredini, Owen Taylor) * 4208 - Fix some warnings from sparse (Kjartan Maraas, Billy Biggs) * 4269 - Fix to not crash when compiled with -fomit-frame-pointer (Ronald Wahl, Owen Taylor) * 4263 - Improve performance for vertical gradients (Richard Stellingwerff, Owen Taylor) * 4231 * 4298 - Accomodate gentoo and Mandriva versions in X server vendor string check (Billy Biggs, Frederic Crozat, Owen Taylor) win32-specific fixes -------------------- * 4599 - Fix "missing wedges" on some stroked paths (win32) (Tim Rowley, Jonathan Watt, Bertram Felgenhauer, Carl Worth, Keith Packard) * 4612 - Fix disappearing text if first character out of surface (win32) (Tim Rowley) * 4602 - Fix shutdown of cairo from failing intermediate, size-0 bitmaps (win32) Aka. the "white rectangles" bug from mozilla-svg testing (Tim Rowley) * Various portability improvements for win32 (Hans Breuer, Owen Taylor, Carl Worth) * 4593 - Fix font sizes to match user expectations (win32) (Tor Lillqvist, Owen Taylor) * 3927 - Fix to report metrics of size 0 for glyph-not-available (win32) (Hans Breuer, Owen Taylor, Tor Lillqvist) * Add locking primitives for win32 (Hans Breuer) xlib-specific fixes ------------------- * Fix crash from size-0 pixmap due to empty clip region (xlib) (Radek Doulík, Carl Worth) Release 1.0.0 (2005-08-24 Carl Worth ) ========================================================= Experimental backends --------------------- * The Glitz, PS, PDF, Quartz, and XCB backends have been declared experimental, and are not part of the API guarantees that accompany this release. They are not built by default, even when the required libraries are available, and must be enabled explicitly with --enable-ps, --enable-pdf, --enable-quartz or --enable-xcb. It is very painful for us to be pushing out a major release without these backends enabled. There has been a tremendous amount of work put into each one and all are quite functional to some extent. However, each also has some limitations. And none of these backends have been tested to the level of completeness and correctness that we expect from cairo backends. We do encourage people to experiment with these backends and report success, failure, or means of improving them. Operator behavior ----------------- * Prior to 0.9.0 the SOURCE, CLEAR and a number of other operators behaved in an inconsistent and buggy fashion and could affect areas outside the clip mask. In 0.9.0, these six "unbounded" operators were fixed to consistently clear areas outside the shape but within the clip mask. This is useful behavior for an operator such as IN, but not what was expected for SOURCE and CLEAR. So, in this release the behavior of SOURCE and CLEAR has been changed again. They now affect areas only within both the source and shape. We can write the new operators as: SOURCE: dest' = (mask IN clip) ? source : dest CLEAR: dest' = (mask IN clip) ? 0 : dest Behavior and API changes ------------------------ * Setting the filter on a gradient pattern would change the interpolation between color stops away from the normal linear interpolation. This dubious behavior has been removed. * The CAIRO_CONTENT_VALID() and CAIRO_FORMAT_VALID() macros -- implementation details that leaked into cairo.h -- have been moved into an internal header. * The cairo_show_text function now advances the current point according to the total advance values of the string. API additions ------------- * cairo_set_dash can now detect error and can set CAIRO_STATUS_INVALID_DASH. Features -------- * When compiled against recent versions of fontconfig and FreeType, artificial bold fonts can now be turned on from fonts.conf using the FC_EMBOLDEN fontconfig key. Optimization ------------ * The compositing code from the 'xserver' code tree has now been completely merged into libpixman. This includes MMX optimization of common operations. * The image transformation code in libpixman has been improved and now performs significantly faster. Bug fixes --------- * Several crashes related to corruption in the font caches have been fixed. * All test cases now match pixel-for-pixel on x86 and PPC; this required fixing bugs in the compositing, stroking, and pattern rendering code. * Negative dash offsets have been fixed to work correctly. * The stroking of paths with mutiple subpaths has now been fixed to apply caps to all subpaths rather than just the last one. * Many build fixes for better portability on various systems. * Lots of other bug fixes, but we're too tired to describe them in more detail here. Release 0.9.2 (2005-08-13 Carl Worth ) ========================================================= Release numbering ----------------- * You will notice that this release jumped from 0.9.0 to 0.9.2. We've decided to use an odd micro version number (eg. 0.9.1) to indicate in-progress development between releases. As soon as 0.9.2 is tagged, the version will be incremented in CVS to 0.9.3 where it will stay until just before 0.9.4 is built, uploaded, and tagged. So, even-micro == a released version, odd-micro == something in-between. Libpixman dependency dropped ---------------------------- * As of this release, the dependency on an external libpixman has been dropped. Instead, the code from libpixman needed for cairo has been incorporated into the cairo source tree. The motivation for this change is that while cairo's API is stable and ready to be maintained after the 1.0 release, libpixman's API is not, so we do not want to expose it at this time. Also, the incorporation of libpixman into cairo also renames all previously-public libpixman symbols in order to avoid any conflict with a future release of libpixman API additions ------------- * Macros and functions have been added so that the version of cairo can be queried at either compile-time or at run-time. The version is made available as both a human-readable string and as a single integer: CAIRO_VERSION_STRING eg. "0.9.2" CAIRO_VERSION eg. 000902 const char* cairo_version_string (void); /* eg. "0.9.2" */ int cairo_version (void); /* eg. 000902 */ A macro is provided to convert a three-part component version into the encoded single-integer form: CAIRO_VERSION_ENCODE(X,Y,Z) For example, the CAIRO_VERSION value of 000902 is obtained as CAIRO_VERSION_ENCODE(0,9,2). The intent is to make version comparisons easy, either at compile-time: #if CAIRO_VERSION >= CAIRO_VERSION_ENCODE(0,9,2) ... #endif Or at run-time: if (cairo_version() >= CAIRO_VERSION_ENCODE(0,9,2)) { /* ... */ } Thread safety ------------- * This release adds pthread-based locking (when available) to make the caches used by cairo safe for threaded programs. Some may remember a failed experiment with this locking between the 0.5.1 and 0.5.2 snapshots, (where even single-threaded programs that linked with -lpthread would deadlock). We believe that that problem has been fixed, so we are looking forward to testing and reports from users with threaded applications. Bug fixes --------- * The XCB and Quartz backends failed to compiled in the 0.9.0 release due to minor syntax errors. These have now been fixed. * Various crashes in glitz and pixman due to size 0 glyphs have been fixed. Release 0.9.0 (2005-08-08 Carl Worth ) ========================================================= Soname change ------------- * In all prior snapshots, the libtool library versioning was set to 1:0:0. As this release is intended to mark the beginning of backwards-compatible releases, the versioning has been incremented to 2:0:0. You will notice that the numeric extension on the installed library filename will change similarly. This change will also require all cairo-using applications to be recompiled. We recognize that this may cause some frustration since this release is backwards-compatible with 0.6.0 and in that sense "shouldn't" require re-compilation. However, since all historical snapshots have used the same 1:0:0 version in spite of incompatible API changes between them, it was essential that the upcoming 1.0 release series have distinct library versioning. All future releases will use the library versioning to properly indicate compatibility between releases. So, any application re-compiled now to work with the 0.9.0 will not need to be recompiled when a compatible 1.0 release of cairo is made in the future. API additions ------------- * Add new function calls to set/get the current antialiasing mode in the graphics state: cairo_set_antialias cairo_get_antialias This call accepts the same modes recently added for font options (NONE or GRAY) but affects the rendering of geometry other than text. The intent of this call is to enable more precise control of which pixels are affected by each operation, for example to allow for full-scene antialiasing for seam-free rendering. It is not expected that non-antialiased rendering will perform better than anti-aliased rendering. * Three new functions were added to provide support for mixed cairo- and non-cairo drawing to the same surface: cairo_surface_mark_dirty cairo_surface_mark_dirty_rectangle cairo_surface_flush * The return type of the several "reference" functions was change, (API compatibly), from void to the same type as the argument. The affected functions are: cairo_font_face_reference cairo_scaled_font_reference cairo_pattern_reference cairo_surface_reference cairo_reference This allows a convenient way to assign and reference in a single statement. Semantic changes ---------------- * The behavior of cairo_set_source with a pattern with a non-identity matrix was previously not well-defined. The new behavior is as follows: The pattern's transformation matrix will be locked to the user space in effect at the time of cairo_set_source(). This means that further modifications of the CTM will not affect the source pattern. cairo-win32 ----------- * Some portability improvements, (eg. workaround for missing stdint.h). cairo-ft -------- * Updated to allow compilation with older versions of freetype. Bug fixes --------- * Fix the unbounded operators to actually produce a correct result, (previously the results were artificially restricted to the bounding box of whatever shape was being drawn rather than extending out infinitely). The fixed operators are: CAIRO_OPERATOR_CLEAR CAIRO_OPERATOR_SOURCE CAIRO_OPERATOR_OUT CAIRO_OPERATOR_IN CAIRO_OPERATOR_DEST_IN CAIRO_OPERATOR_DEST_ATOP * Fix cairo_mask and cairo_mask_surface to transform the mask by the current transformation matrix (CTM). * Fix cairo_set_source to lock the CTM used to transform the pattern. * Workaround for X server Render bug involving repeating patterns with a general transformation matrix. * cairo_get_font_face fixed to return a "nil" font face object rather than NULL on error. * cairo_set_font_face fixed to not crash if given a NULL font face, (which is the documented interface for restoring the default font face). * Fix xlib glyphset caching to not try to free a NULL glyph. Snapshot 0.6.0 (2005-07-28 Carl Worth ) ========================================================== API changes ----------- * The prototypes of the following functions have changed: cairo_xlib_surface_create_with_xrender_format cairo_xlib_surface_create_for_bitmap A Screen* parameter has been added to each. This allows the cairo xlib backend to work correctly with multi-head X servers. * The following function has been modified: cairo_scaled_font_create to accept a cairo_font_options_t*. See below fore more details. * All opaque, reference-counted cairo objects have now been moved to a standard error-handling scheme. The new objects to receive this treatment are cairo_font_face_t, cairo_scaled_font_t, and cairo_surface_t. (Previous snapshots already provided this scheme for cairo_t, cairo_path_t, and cairo_pattern_t.) This changes two functions to have a return type of void rather than cairo_status_t: cairo_scaled_font_extent cairo_surface_finish And significantly, none of the create functions for any of the objects listed above will return NULL. The pointer returned from any function will now always be a valid pointer and should always be passed to the corresponding destroy function when finished The simplest strategy for porting code is to switch from: object = cairo__create (); if (object == NULL) goto BAILOUT; /* act on object */ cairo__destroy (object); to: object = cairo__create (); if (cairo__status (object)) goto BAILOUT; /* act on object */ cairo__destroy (object); But significantly, it is not required to check for an error status before the "act on object" portions of the code above. All operations on an object with an error status are, by definition, no-ops without side effect. So new code might be written in an easier-to-read style of: object = cairo__create (); /* act on object */ cairo__destroy (object); with cairo__status checks placed only at strategic locations. For example, passing an error object to another object, (eg. cairo_set_source with an in-error pattern), will propagate the error to the subsequent object (eg. the cairo_t). This means that error checking can often be deferred even beyond the destruction of a temporary object. API additions ------------- * New functions for checking the status of objects that have been switched to the common error-handling scheme: cairo_font_face_status cairo_scaled_font_status cairo_surface_status * The _cairo_error function which was added in 0.5.1 has now been made much more useful. In 0.5.1 only errors on cairo_t objects passed through _cairo_error. Now, an error on any object should pass through _cairo_error making it much more reliable as a debugging mechanism for finding when an error first occurs. * Added new font options support with a myriad of functions: cairo_font_options_create cairo_font_options_copy cairo_font_options_destroy cairo_font_options_status cairo_font_options_merge cairo_font_options_equal cairo_font_options_hash cairo_font_options_set_antialias cairo_font_options_get_antialias cairo_font_options_set_subpixel_order cairo_font_options_get_subpixel_order cairo_font_options_set_hint_style cairo_font_options_get_hint_style cairo_font_options_set_hint_metrics cairo_font_options_get_hint_metrics cairo_surface_get_font_options cairo_ft_font_options_substitute cairo_set_font_options cairo_get_font_options This new font options support allows the application to have much more fine-grained control over how fonts are rendered. Significantly, it also allows surface backends to have some influence over the process. For example, the xlib backend now queries existing Xft properties to set font option defaults. * New function: cairo_xlib_surface_set_drawable which allows the target drawable for an xlib cairo_surface_t to be changed to another with the same format, screen, and display. This is necessary in certain double-buffering techniques. New features ------------ * Sub-pixel text antialiasing is now supported. Bug fixes --------- * Fixed assertion failure in cairo_surface_create_similar when application commits an error by passing a cairo_format_t rather than a cairo_content_t. * Avoid division by zero in various places (cairo-ft). * Fix infinite loop when using non-default visuals (cairo-xlib). * Eliminate segfault in cairo_image_surface_create_from_png_stream. * Prevent errant sign-extension of masks on 64-bit architectures (cairo-xlib and cairo-xcb). * Other miscellaneous fixes. Snapshot 0.5.2 (2005-07-18 Carl Worth ) ========================================================== API changes ----------- * New functions for creating patterns of a single color: cairo_pattern_create_rgb cairo_pattern_create_rgba * Change cairo_surface_create_similar to accept a new type of cairo_content_t rather than cairo_format_t: typedef enum _cairo_content { CAIRO_CONTENT_COLOR = 0x1000, CAIRO_CONTENT_ALPHA = 0x2000, CAIRO_CONTENT_COLOR_ALPHA = 0x3000 } cairo_content_t; * Add new CAIRO_FORMAT_VALID and CAIRO_CONTENT_VALID macros. * Remove unused status value: CAIRO_STATUS_NO_TARGET_SURFACE * Add new status values: CAIRO_STATUS_INVALID_STATUS * Require libpixman >= 0.1.5 (for necessary bug fixes) Bug fixes --------- * Fix cairo_surface_write_to_png for RGB24 images. * Fix broken metrics and rendering for bitmap fonts. Add mostly useless bitmap glyph transformation. * Fix glyph caches to not eject entries that might be immediately needed, (fixing intermittent crashes when rendering text). * Fix all memory leaks found by running "make check-valgrind". ATSUI backend changes --------------------- * Allow building against < 10.3 SDK. * Prevent crash on empty strings. Glitz backend changes --------------------- * Require glitz >= 0.4.4. * Use frame buffer objects instead of pbuffers for accelerated offscreen drawing. * Minor improvement to gradient pattern creation. PostScript backend fixes ------------------------ * Rewrite of the PS backend to generate more interesting output that the old big-image implementation. Win32 backend fixes ------------------- * Implement glyph path support. * Fix swap of blue and green values in the fill_rectangles path. Xlib backend fixes ------------------ * Add optimization to use XCopyArea rather than XRenderComposite when transforming only with an integer translation, and using SOURCE operator or OVER with a source pattern without alpha. Snapshot 0.5.1 (2005-06-20 Carl Worth ) ========================================================== API changes ----------- * Removed cairo_status_string(cairo_t*) and add cairo_status_to_string(cairo_status_t) in its place. Code using cairo_status_string can be ported forward as follows: cairo_status (cr); -> cairo_status_to_string (cairo_status (cr)); * Removed the BAD_NESTING restriction which means that two different cairo_t objects can now interleave drawing to the same cairo_surface_t without causing an error. * The following functions which previously had a return type of cairo_status_t now have a return type of void: cairo_pattern_add_color_stop_rgba cairo_pattern_set_matrix cairo_pattern_get_matrix cairo_pattern_set_extend cairo_pattern_set_filter See discussion of cairo_pattern_status below for more details. API additions ------------- * Improved error handling: cairo_status_t cairo_pattern_status (cairo_pattern_t *pattern); This snapshot expands the status-based error handling scheme from cairo_t to cairo_path_t and cairo_pattern_t. It also expands the scheme so that object-creating functions, (cairo_create, cairo_pattern_create_*, cairo_copy_path_*), are now guaranteed to not return NULL. Instead, in the case of out-of-memory these functions will return a static object with status==CAIRO_STATUS_NO_MEMORY. The status can be checked with the functions cairo_status and cairo_pattern_status, or by direct inspection of the new status field in cairo_path_t. Please note that some objects, including cairo_surface_t and all of the font-related objects have not been converted to this error-handling scheme. * In addition to the above changes, a new private function has been added: _cairo_error This function can be used to set a breakpoint in a debugger to make it easier to find programming error in cairo-using code. (Currently, _cairo_error is called when any error is detected within a cairo_t context, but is not called for non-cairo_t errors such as for cairo_path_t and cairo_pattern_t). * Fixed cairo_path_data_t so that its enum is visible to C++ code, (as cairo_path_data_type_t). Performance improvements ------------------------ * Made a minor performance improvement for clipping, (restrict clip surface to the new intersected bounds). * Optimize rendering of a solid source pattern with a pixel-aligned rectangular path to use backend clipping rather than rasterization and backend compositing. * Optimize cairo_paint_with_alpha to defer to cairo_paint when alpha is 1.0. Bug fixes --------- * Fixed memory leak in cairo_copy_path. * A build fix for non-srcdir builds. PDF backend fixes ----------------- * New support for path-based clipping. * Fix for text rotated to angles other than multiples of π/2. Win32 backend fixes ------------------- * Fix for text extents. Xlib backend ------------ * Implemented a complex workaround for X server bug[*] related to Render-based compositing with untransformed, repeating source pictures. The workaround uses core Xlib when possible for performance, (ie. with CAIRO_OPERATOR_SOURCE or CAIRO_OPERATOR_OVER with an opaque source surface), and falls back to the pixman image-based compositing otherwise. [*] https://bugs.freedesktop.org/show_bug.cgi?id=3566 * Various bug fixes, particularly in the fallback paths. Snapshot 0.5.0 (2005-05-17 Carl Worth ) ========================================================== This is a pretty big, and fairly significant snapshot. It represents between 2 and 3 months of solid work from a lot of people on improving the API as much as possible. I'd like to express my appreciation and congratulations to everyone who has worked on the big API Shakeup, (whether in email battles over names, or fixing my silly bugs). This snapshot will require some effort on the part of users, since there are a _lot_ of API changes (ie. no cairo program ever written is safe --- they're all broken now in at least one way). But, in spite of that, we do encourage everyone to move their code to this snapshot as soon as possible. And we're doing everything we can think of to make the transition as smooth as possible. The idea behind 0.5 is that we've tried to make every good API change we could want now, and get them all done with. That is, between now and the 1.0 release of cairo, we expect very few new API changes, (though some will certainly sneak in). We will have some significant additions, but the pain of moving code from cairo 0.4 to cairo 0.5 should be a one time experience, and things should be much smoother as we continue to move toward cairo 1.0. And with so many changes coming out for the first time in this 0.5 release, we really do need a lot of people trying this out to make sure the ideas are solid before we freeze the API in preparation for the 1.0 release. OK, enough introduction. Here is a (not-quite-complete) description of the API removals, changes and additions in this snapshot, (compared to 0.4.0) API removals ============ The following public functions have been removed: - cairo_set_target_* This is a big change. See the description of cairo_create in the API changes section for how to deal with this. - cairo_set_alpha Alpha blending hasn't gone away; there's just a much more unified rendering model now. Almost all uses of cairo_set_alpha will be trivially replaced with cairo_set_source_rgba and a few others will be replaced just as easily with cairo_paint_with_alpha. - cairo_show_surface Another useful function that we realized was muddling up the rendering model. The replacement is quite easy: cairo_set_source_surface and cairo_paint. - cairo_matrix_create - cairo_matrix_destroy - cairo_matrix_copy - cairo_matrix_get_affine These functions supported an opaque cairo_matrix_t. We now have an exposed cairo_matrix_t structure, so these can be dropped. - cairo_surface_set_repeat - cairo_surface_set_matrix - cairo_surface_set_filter These properties don't belong on surfaces. If you were using them, you'll just want to instead use cairo_pattern_create_for_surface and then set these properties on the pattern. - cairo_copy This was a confusing function and hopefully nobody will miss it. But if you really don't find cairo_save/restore adequate, let us know and we have another idea for a potential replacement. And while we're on the subject of removals, we carefully tightened up the cairo header files so they no longer gratuitously include header files that are not strictly necessary, (stdio.h, stdint.h, pixman.h, Xrender.h, etc. and their dependencies). This may lead to some surprising errors, so keep your eyes open for that. API changes =========== Here are some of the API changes that have occurred: ~ cairo_create(void) -> cairo_create(cairo_surface_t *) This is the big change that breaks every program. The ability to re-target a cairo_t was not particularly useful, but it did introduce a lot of muddy semantic questions. To eliminate that, cairo_create now requires its target surface to be passed in at creation time. This isn't too hard to cope with as the typical first operation after cairo_create was often cairo_set_target_foo. So the order of those two swap and the application instead has cairo_foo_surface_create, then cairo_create. ~ cairo_current_* -> cairo_get_* We had a strange mixture of cairo_get and cairo_current functions. They've all been standardized on cairo_get, (though note one is cairo_get_current_point). ~ CAIRO_OPERATOR_SRC -> CAIRO_OPERATOR_SOURCE ~ CAIRO_OPERATOR_OVER_REVERSE -> CAIRO_OPERATOR_DEST_OVER Many of the cairo_operator_t symbolic values were renamed to reduce the amount of abbreviation. The confusing "OP_REVERSE" naming was also changed to use "DEST_OP" instead which is easier to read and has wider acceptance in other libraries/languages. ~ cairo_set_pattern -> cairo_set_source ~ cairo_set_rgb_color -> cairo_set_source_rgb All of the various functions that changed the source color/pattern were unified to use cairo_set_source names to make the relation more clear. ~ cairo_transform_point -> cairo_user_to_device ~ cairo_transform_distance -> cairo_user_to_device_distance ~ cairo_inverse_transform_point -> cairo_device_to_user ~ cairo_inverse_transform_distance -> cairo_device_to_user_distance These names just seemed a lot more clear. ~ cairo_init_clip -> cairo_reset_clip ~ cairo_concat_matrix -> cairo_transform More abbreviation elimination ~ cairo_current_path -> cairo_copy_path ~ cairo_current_path_flat -> cairo_copy_path_flat The former mechanism for examining the current path was a function that required 3 or 4 callbacks. This was more complexity than warranted in most situations. The new cairo_copy_path function copies the current path into an exposed data structure, and the documentation provides a convenient idiom for navigating the path data. API additions ------------- + cairo_paint A generalized version of the painting operators cairo_stroke and cairo_fill. The cairo_paint call applies the source paint everywhere within the current clip region. Very useful for clearing a surface to a solid color, or painting an image, (see cairo_set_source_surface). + cairo_paint_with_alpha Like cairo_paint but applying some alpha to the source, (making the source paint translucent, eg. to blend an image on top of another). + cairo_mask A more generalized version of cairo_paint_with_alpha which allows a pattern to specify the amount of translucence at each point rather than using a constant value everywhere. + cairo_mask_surface A convenience function on cairo_mask for when the mask pattern is already contained within a surface. + cairo_surface_set_user_data + cairo_surface_get_user_data + cairo_font_face_set_user_data + cairo_font_face_get_user_data Associate arbitrary data with a surface or font face for later retrieval. Get notified when a surface or font face object is destroyed. + cairo_surface_finish Allows the user to instruct cairo to finish all of its operations for a given surface. This provides a safe point for doing things such as flushing and closing files that the surface may have had open for writing. + cairo_fill_preserve + cairo_stroke_preserve + cairo_clip_preserve One interesting change in cairo is that the path is no longer part of the graphics state managed by cairo_save/restore. This allows functions to construct paths without interfering with the graphics state. But it prevents the traditional idiom for fill-and-stroke: cairo_save; cairo_fill; cairo_restore; cairo_stroke Instead we know have alternate versions cairo cairo_fill, cairo_stroke, and cairo_clip that preserve the current path rather than consuming it. So the idiom now becomes simply: cairo_fill_preserve; cairo_stroke + cairo_surface_write_to_png + cairo_surface_write_to_png_stream In place of a single PNG backend, now a surface created through any backend (except PDF currently) can be written out to a PNG image. + cairo_image_surface_create_from_png + cairo_image_surface_create_from_png_stream And its just as easy to load a PNG image into a surface as well. + cairo_append_path With the new, exposed path data structure, it's now possible to append bulk path data to the current path, (rather than issuing a long sequence of cairo_move_to/line_to/curve_to function calls). Xlib and XCB backends --------------------- Any cairo_format_t and Colormap arguments have been dropped from cairo_xlib_surface_create. There are also two new cairo_xlib|xcb_surface_create functions: cairo_xlib|xcb_surface_create_for_bitmap (Particular for creating A1 surfaces) cairo_xlib|xcb_surface_create_with_xrender_format (For any other surface types, not described by a Visual*) All of these surface create functions now accept width and height. In addition, there are new cairo_xlib|xcb_surface_set_size functions which must be called each time a window that is underlying a surface changes size. Print backends (PS and PDF) --------------------------- The old FILE* based interfaces have been eliminated. In their place we have two different functions. One accepts a simple const char *filename. The other is a more general function which accepts a callback write function and a void* closure. This should allow the flexibility needed to hook up with various stream object in many languages. In addition, when specifying the surface size during construction, the units are now device-space units (ie. points) rather than inches. This provides consistency with all the other surface types and also makes it much easier to reason about the size of the surface when drawing to it with the default identity matrix. Finally, the DPI parameters, which are only needed to control the quality of fallbacks, have been made optional. Nothing is required during surface_create (300 DPI is assumed) and cairo_ps|pdf_surface_set_dpi can be used to set alternate values if needed. Font system ----------- Owen very graciously listened to feedback after the big font rework he had done for 0.4, and came up with way to improve it even more. In 0.4 there was a cairo_font_t that was always pre-scaled. Now, there is an unscaled cairo_font_face_t which is easier to construct, (eg. no scaling matrix required) and work with, (it can be scaled and transformed after being set on the graphics state). And the font size manipulation functions are much easier. You can set an explicit size and read/modify/write the font matrix with: cairo_set_font_size cairo_get_font_matrix cairo_set_font_matrix (Previously you could only multiply in a scale factor or a matrix.) A pleasant side effect is that we can (and do) now have a default font size that is reasonable, as opposed to the old default height of one device-space unit which was useless until scaled. Of course, the old pre-scaled font had allowed some performance benefits when getting many metrics for a font. Those benefits are still made available through the new cairo_scaled_font_t. And a cairo_font_face_t can be "promoted" to a cairo_scaled_font_t by suppling a font_matrix and the desired CTM. Quartz backend -------------- Tim Rowley put in the work to bring the Quartz backend back after it had been disabled in the 0.4.0 snapshot. He was not able to bring back the function that allows one to create a cairo_font_t from an ATSUI style: cairo_font_t * cairo_atsui_font_create (ATSUStyle style); because he didn't have a test case for it. If you care about this function, please provide a fairly minimal test and we'll try to bring it back in an upcoming snapshot. Snapshot 0.4.0 (2005-03-08 Carl Worth ) ========================================================== New documentation ----------------- Owen Taylor has converted cairo's documentation system to gtk-doc and has begun some long-needed work on the documentation, which can now be viewed online here: http://cairographics.org/manual/ New backend: win32 ------------------ This is the first snapshot to include a functional win32 backend, (thanks to Owen Taylor). The interface is as follows: #include void cairo_set_target_win32 (cairo_t *cr, HDC hdc); cairo_surface_t * cairo_win32_surface_create (HDC hdc); cairo_font_t * cairo_win32_font_create_for_logfontw (LOGFONTW *logfont, cairo_matrix_t *scale); cairo_status_t cairo_win32_font_select_font (cairo_font_t *font, HDC hdc); void cairo_win32_font_done_font (cairo_font_t *font); double cairo_win32_font_get_scale_factor (cairo_font_t *font); And see also the documentation at: http://cairographics.org/manual/cairo-Microsoft-Windows-Backend.html Disabled backend: quartz ------------------------ Unfortunately, the quartz backend code is currently out of date with respect to some recent backend interface changes. So, the quartz backend is disabled in this snapshot. If the quartz backend is brought up-to-date before the next snapshot, we would be glad to make a 0.4.1 snapshot that re-enables it, (we do not expect many more big backend interface changes). API Changes ----------- The font system has been revamped, (as Owen Taylor's work with integrating pango and cairo gave us the first serious usage of the non-toy font API). One fundamental, user-visible change is that the cairo_font_t object now represents a font that is scaled to a particular device resolution. Further changes are described below. cairo.h ------- Removed cairo_font_set_transform and cairo_font_current_transform. Added cairo_font_extents and cairo_font_glyph_extents. See documentation for details: http://cairographics.org/manual/cairo-cairo-t.html#cairo-font-extents cairo-ft.h ---------- The cairo_ft_font API changed considerably. Please see the documentation for details: http://cairographics.org/manual/cairo-FreeType-Fonts.html Performance ----------- Make the fast-path clipping (pixel-aligned rectangles) faster. Add optimization for applying a constant alpha to a pattern. Optimize gradients that are horizontal or vertical in device space. Xlib: When RENDER is not available, use image surfaces for intermediate surfaces rather than xlib surfaces. Backend-specific changes ------------------------ Glitz ----- Major update to glitz backend. The output quality should now be just as good as the image and xlib backends. Track changes to glitz 0.4.0. PDF --- Various improvements to produce more conformant output. Internals --------- David Reveman contributed a large re-work of the cairo_pattern_t implementation, providing cleaner code and more optimization opportunities. Backend interface changes ------------------------- Rework backend interface to accept patterns, not surfaces for source and mask. Remove set_matrix, set_filter, and set_repeat functions. More sophisticated backend interface for image fallbacks, ({acquire,release}_{source,dest}_image() and clone_similar). Bug fixes --------- Only install header files for backends that have been compiled. Fixed some rounding errors leading to incorrectly placed glyphs. Many other minor fixes. Snapshot 0.3.0 (2005-01-21 Carl Worth ) ========================================================== Major API changes ----------------- 1) The public header files will no longer be directly installed into the system include directory. They will now be installed in a subdirectory named "cairo", (eg. in /usr/include/cairo rather than in /usr/include). As always, the easiest way for applications to discover the location of the header file is to let pkg-config generate the necessary -I CFLAGS and -L/-l LDFLAGS. For example: cc `pkg-config --cflags --libs cairo` -o foo foo.c IMPORTANT: Users with old versions of cairo installed will need to manually remove cairo.h and cairo-features.h from the system include directories in order to prevent the old headers from being used in preference to the new ones. 2) The backend-specific portions of the old monolithic cairo.h have been split out into individual public header files. The new files are: cairo-atsui.h cairo-ft.h cairo-glitz.h cairo-pdf.h cairo-png.h cairo-ps.h cairo-quartz.h cairo-xcb.h cairo-xlib.h Applications will need to be modified to explicitly include the new header files where appropriate. 3) There are two new graphics backends in this snapshot, a PDF backend, and a Quartz backend. There is also one new font backend, ATSUI. PDF backend ----------- Kristian Høgsberg has contributed a new backend to allow cairo-based applications to generate PDF output. The interface for creating a PDF surface is similar to that of the PS backend, as can be seen in cairo-pdf.h: void cairo_set_target_pdf (cairo_t *cr, FILE *file, double width_inches, double height_inches, double x_pixels_per_inch, double y_pixels_per_inch); cairo_surface_t * cairo_pdf_surface_create (FILE *file, double width_inches, double height_inches, double x_pixels_per_inch, double y_pixels_per_inch); Once a PDF surface has been created, applications can draw to it as any other cairo surface. This code is still a bit rough around the edges, and does not yet support clipping, surface patterns, or transparent gradients. Text only works with TrueType fonts at this point and only black text is supported. Also, the size of the generated PDF files is currently quite big. Kristian is still actively developing this backend, so watch this space for future progress. Quartz backend -------------- Calum Robinson has contributed a new backend to allow cairo applications to target native Mac OS X windows through the Quartz API. Geoff Norton integrated this backend into the current configure-based build system, while Calum also provided Xcode build support in the separate "macosx" module available in CVS. The new interface, available in cairo-quartz.h, is as follows: void cairo_set_target_quartz_context (cairo_t *cr, CGContextRef context, int width, int height); cairo_surface_t * cairo_quartz_surface_create (CGContextRef context, int width, int height); There is an example program available in CVS in cairo-demo/quartz. It is a port of Keith Packard's fdclock program originally written for the xlib backend. A screenshot of this program running on Mac OS X is available here: http://cairographics.org/~cworth/images/fdclock-quartz.png ATSUI font backend ------------------ This new font backend complements the Quartz backend by allowing applications to use native font selection on Mac OS X. The interface is a single new function: cairo_font_t * cairo_atsui_font_create (ATSUStyle style); Minor API changes ----------------- Prototype for non-existent function "cairo_ft_font_destroy" removed. Now depends on libpixman 0.1.2 or newer, (0.1.3 is being released concurrently and has some useful performance improvements). Default paint color is now opaque black, (was opaque white). Default background color is transparent (as before). Renamed "struct cairo" to "struct _cairo" to free up the word "cairo" from the C++ identifier name space. Functions returning multiple return values through provided pointers, (cairo_matrix_get_affine, cairo_current_point, and cairo_current_color_rgb), will now accept NULL for values the user wants to ignore. CAIRO_HAS_FREETYPE_FONT has now been renamed to CAIRO_HAS_FT_FONT. Performance improvements ------------------------ Alexander Larsson provided some fantastic performance improvements yielding a 10000% performance improvement in his application, (when also including his performance work in libpixman-0.1.3). These include * Fixed handling of cache misses. * Creating intermediate clip surfaces at the minimal size required. * Eliminating roundtrips when creating intermediate Xlib surfaces. Implementation -------------- Major re-work of font metrics system by Keith Packard. Font metrics should now be much more reliable. Glitz backend ------------- Updated for glitz-0.3.0. Bug fixes in reference counting. Test suite ---------- New tests for cache crashing, rotating text, improper filling of complex polygons, and leaky rasterization. Bug fixes --------- Fixed assertion failure when selecting the same font multiple times in sequence. Fixed reference counting so cache_destroy functions work. Remove unintended copyright statement from files generated with PostScript backend. Fixed to eliminate new warnings from gcc 3.4 and gcc 4. Snapshot 0.2.0 (2004-10-27 Carl Worth ) =========================================================== New license: LGPL/MPL --------------------- The most significant news with this release is that the license of cairo has changed. It is now dual-licensed under the LGPL and the MPL. For details see the COPYING file as well as COPYING-LGPL-2.1 and COPYING-MPL-1.1. I express my thanks to everyone involved in the license change process for their patience and support! New font and glyph internals ---------------------------- Graydon Hoare has put a tremendous amount of work into new internals for handling fonts and glyphs, including caches where appropriate. This work has no impact on the user-level API, but should result in great performance improvements for applications using text. New test suite -------------- This snapshot of cairo includes a (small) test suite in cairo/test. The tests can be run with "make check". The test suite was designed to make it very easy to add new tests, and we hope to see many contributions here. As you find bugs, please try adding a minimal test case to the suite, and submit it with the bug report to the cairo@cairographics.org mailing list. This will make it much easier for us to track progress in fixing bugs. New name for glitz backend -------------------------- The gl backend has now been renamed to the glitz backend. This means that the following names have changed: CAIRO_HAS_GL_SURFACE -> CAIRO_HAS_GLITZ_SURFACE cairo_set_target_gl -> cairo_set_target_glitz cairo_gl_surface_create -> cairo_glitz_surface_create This change obviously breaks backwards compatibility for applications using the old gl backend. Up-to-date with latest glitz snapshots -------------------------------------- This snapshot of cairo is now up to date with the latest glitz snapshot, (currently 0.2.3). We know that the latest cairo and glitz snapshots have been incompatible for a very long time. We've finally fixed that now and we're determined to not let that happen again. Revert some tessellation regression bugs ---------------------------------------- People that have been seeing some tessellation bugs, (eg. leaked fills), in the CVS version of cairo may have better luck with this release. A change since the last snapshot was identified to trigger some of these bugs and was reverted before making the snapshot. The behavior should be the same as the previous (0.1.23) snapshot. Miscellaneous changes --------------------- Changed CAIRO_FILTER_DEFAULT to CAIRO_FILTER_BEST to make gradients easier. Track XCB API change regarding iterators. Various bug fixes ----------------- Fix calculation of required number of vertices for pen. Fix to avoid zero-dimensioned pixmaps. Fix broken sort of pen vertices. Fix bug when cairo_show_text called with a NULL string. Fix clipping bugs. Fix bug in computing image length with XCB. Fix infinite loop bug in cairo_arc. Fix memory management interactions with libpixman. Snapshot 0.1.23 (2004-05-11 Carl Worth ) ======================================================== Fixes for gcc 3.4 ----------------- Fix prototype mismatches so that cairo can be built by gcc 3.4. Updates to track glitz ---------------------- Various fixes to support the latest glitz snapshot (0.1.2). Gradient updates ---------------- Radial gradients now support both inner and outer circles. Transformed linear gradients are now properly handled. Fixes for extend type reflect. Glitz updates ------------- Converted shading routines to use fixed point values and introduced a shading operator structure for more efficient shading calculations. Support compositing with mask surface when mask is solid or multi-texturing is available. PNG backend cleanups -------------------- Fix output to properly compensate for pre-multiplied alpha format in cairo. Add support for A8 and A1 image formats. Bug fixes --------- Avoid crash or infinite loop on null strings and degeneratively short splines. New? bugs in cairo_clip ----------------------- There are some fairly serious bugs in cairo_clip. It is sometimes causing an incorrect result. And even when it does work, it is sometimes so slow as to be unusable. Some of these bugs may not be new, (indeed cairo_clip has only ever had a braindead-slow implementation), but I think they're worth mentioning here. Snapshot 0.1.22 (2004-04-16 Carl Worth ) ======================================================== Cairo was updated to track the changes in libpixman, and now depends on libpixman version 0.1.1. Snapshot 0.1.21 (2004-04-09 David Reveman ) ============================================================= New OpenGL backend ------------------ The OpenGL backend provides hardware accelerated output for X11 and OS X. The significant new functions are: cairo_set_target_gl cairo_gl_surface_create Automatic detection of available backends ----------------------------------------- The configure script now automatically detect what backends are available, (use ./configure --disable-`backend' to prevent compilation of specific backends). Snapshot 0.1.20 (2004-04-06 Carl Worth ) ======================================================== New pattern API --------------- David Reveman has contributed a new pattern API which enable linear and radial gradient patterns in addition to the original surface-based patterns. The significant new top-level functions are: cairo_pattern_create_linear cairo_pattern_create_radial cairo_pattern_create_for_surface cairo_pattern_add_color_stop cairo_set_pattern Any code using the old cairo_set_pattern, (which accepted a cairo_surface_t rather than a cairo_pattern_t), will need to be updated. Update to XCB backend --------------------- The XCB backend is now enabled by default, (use ./configure --disable-xcb to turn it off). Faster clipping --------------- Graydon Hoare has added optimizations that make cairo_clip much faster when the path is a pixel-aligned, rectangular region. Bug fixes. Snapshot 0.1.19 (2004-02-24 Carl Worth ) ======================================================== New PNG backend --------------- Olivier Andrieu contributed a new PNG backend. It builds on the existing image backend to make it easy to render "directly" to a .png file. The user never needs to deal with the actual image buffer. The significant new functions are: cairo_set_target_png cairo_png_surface_create The PNG backend is not enabled by default so that by default there is not a new dependency on libpng. Use ./configure --enable-png to enable this backend. Snapshot 0.1.18 (2004-02-17 Carl Worth ) ======================================================== Path query functionality ------------------------ It's now possible to query the current path. The two new functions are: cairo_current_path cairo_current_path_flat Each function accepts a number of callback functions that will be called for each element in the path (move_to, line_to, curve_to, close_path). The cairo_current_path_flat function does not accept a curve_to callback. Instead, all curved portions of the path will be converted to line segments, (within the current tolerance value). This can be handy for doing things like text-on-path without having to manually interpolate Bézier splines. New XCB backend --------------- Jamey Sharp has contributed a second X backend that uses the new, lean XCB library rather than Xlib. It cannot currently be compiled at the same time as the Xlib backend. See ./configure --enable-xcb. Build fixes for cygwin. Bug fixes. Snapshot 0.1.17 (2003-12-16 Carl Worth ) ======================================================== Better text support ------------------- This snapshot provides much better text support by implementing the following four functions: cairo_text_extents cairo_glyph_extents cairo_text_path cairo_glyph_path The text/glyph_extents functions can be used to determine the bounding box (and advance) for text as if drawn by show_text/glyphs. The text/glyph_path objects functions place text shapes on the current path, where they can be subsequently manipulated. For example, following these functions with cairo_stroke allows outline text to be drawn. Calling cairo_clip allows clipping to a text-shaped region. Combined dependencies --------------------- The cairo core now depends only on the libpixman library. This single library replaces the three previous libraries libic, libpixregion, and slim. Thanks to Dave Beckett for all of the heavy lifting with this renaming effort. Conditional compilation of backends ----------------------------------- Cairo now allows optional backends to be disabled at compile time. The following options may now be passed to the configure script: --disable-xlib --disable-ps Note that the first option is a change from the old --without-x option which will no longer have any effect. OS X supported - several byte-order issues resolved --------------------------------------------------- Cairo has now been successfully compiled under OS X. Testing revealed that there were some byte-order problems in the PostScript backend and the PNG generation in the demos. These have now been resolved. 2003-10 ======= Graydon Hoare implemented the first real text support using Freetype/fontconfig, (previous versions of cairo used Xft and could only draw text when using an X backend). 2003-09 ======= Graydon Hoare added the first real support for running cairo with a non-render-aware X server. Jamey Sharp virtualized the backend font and surface interfaces in September, 2003. 2003-06 ======= Xr is renamed cairo to avoid confusion since it no longer had a strict dependence on X. 2003-05 ======= A new image surface backend is added to Xr. Keith Packard wrote the image compositing code in libic that is used for the image_surface backend. This code was originally written as the software fallback for the render extension within the X server. 2002-06 ======= Carl Worth wrote the first lines of Xr, after Keith Packard proposed the plan for a stateful drawing library in C providing a PostScript-like rendering model. LocalWords: mutex BeOS extraordinaire distro's URL lcd bool tarball