add doxygen documentation for ext-stream-restore.h

1 files changed, 464 insertions, 465 deletions

diff --git a/doxygen/doxygen.conf.in b/doxygen/doxygen.conf.in
index 7ad5d2f3..6c2021ce 100644
--- a/doxygen/doxygen.conf.in
+++ b/doxygen/doxygen.conf.in
@@ -14,191 +14,191 @@
 # Project related configuration options
 #---------------------------------------------------------------------------
 
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded 
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
 # by quotes) that should identify the project.
 
 PROJECT_NAME           = PulseAudio
 
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. 
-# This could be handy for archiving the generated documentation or 
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
 # if some version control system is used.
 
 PROJECT_NUMBER         = @PACKAGE_VERSION@
 
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) 
-# base path where the generated documentation will be put. 
-# If a relative path is entered, it will be relative to the location 
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
 # where doxygen was started. If left blank the current directory will be used.
 
-OUTPUT_DIRECTORY       = 
+OUTPUT_DIRECTORY       =
 
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 
-# 4096 sub-directories (in 2 levels) under the output directory of each output 
-# format and will distribute the generated files over these directories. 
-# Enabling this option can be useful when feeding doxygen a huge amount of source 
-# files, where putting all generated files in the same directory would otherwise 
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
+# 4096 sub-directories (in 2 levels) under the output directory of each output
+# format and will distribute the generated files over these directories.
+# Enabling this option can be useful when feeding doxygen a huge amount of source
+# files, where putting all generated files in the same directory would otherwise
 # cause performance problems for the file system.
 
 CREATE_SUBDIRS         = NO
 
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all 
-# documentation generated by doxygen is written. Doxygen will use this 
-# information to generate all constant output in the proper language. 
-# The default language is English, other supported languages are: 
-# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, 
-# Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese, 
-# Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian, 
-# Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, 
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish,
+# Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese,
+# Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian,
+# Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish,
 # Swedish, and Ukrainian.
 
 OUTPUT_LANGUAGE        = English
 
-# This tag can be used to specify the encoding used in the generated output. 
-# The encoding is not always determined by the language that is chosen, 
-# but also whether or not the output is meant for Windows or non-Windows users. 
-# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES 
-# forces the Windows encoding (this is the default for the Windows binary), 
-# whereas setting the tag to NO uses a Unix-style encoding (the default for 
+# This tag can be used to specify the encoding used in the generated output.
+# The encoding is not always determined by the language that is chosen,
+# but also whether or not the output is meant for Windows or non-Windows users.
+# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES
+# forces the Windows encoding (this is the default for the Windows binary),
+# whereas setting the tag to NO uses a Unix-style encoding (the default for
 # all platforms other than Windows).
 
 USE_WINDOWS_ENCODING   = NO
 
-# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will 
-# include brief member descriptions after the members that are listed in 
-# the file and class documentation (similar to JavaDoc). 
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
 # Set to NO to disable this.
 
 BRIEF_MEMBER_DESC      = YES
 
-# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend 
-# the brief description of a member or function before the detailed description. 
-# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the 
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
 # brief descriptions will be completely suppressed.
 
 REPEAT_BRIEF           = YES
 
-# This tag implements a quasi-intelligent brief description abbreviator 
-# that is used to form the text in various listings. Each string 
-# in this list, if found as the leading text of the brief description, will be 
-# stripped from the text and the result after processing the whole list, is used 
-# as the annotated text. Otherwise, the brief description is used as-is. If left 
-# blank, the following values are used ("$name" is automatically replaced with the 
-# name of the entity): "The $name class" "The $name widget" "The $name file" 
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is used
+# as the annotated text. Otherwise, the brief description is used as-is. If left
+# blank, the following values are used ("$name" is automatically replaced with the
+# name of the entity): "The $name class" "The $name widget" "The $name file"
 # "is" "provides" "specifies" "contains" "represents" "a" "an" "the"
 
-ABBREVIATE_BRIEF       = 
+ABBREVIATE_BRIEF       =
 
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then 
-# Doxygen will generate a detailed section even if there is only a brief 
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
 # description.
 
 ALWAYS_DETAILED_SEC    = NO
 
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited 
-# members of a class in the documentation of that class as if those members were 
-# ordinary class members. Constructors, destructors and assignment operators of 
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited
+# members of a class in the documentation of that class as if those members were
+# ordinary class members. Constructors, destructors and assignment operators of
 # the base classes will not be shown.
 
 INLINE_INHERITED_MEMB  = NO
 
-# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full 
-# path before files name in the file list and in the header files. If set 
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
 # to NO the shortest path that makes the file name unique will be used.
 
 FULL_PATH_NAMES        = NO
 
-# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag 
-# can be used to strip a user-defined part of the path. Stripping is 
-# only done if one of the specified strings matches the left-hand part of 
-# the path. The tag can be used to show relative paths in the file list. 
-# If left blank the directory from which doxygen is run is used as the 
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the
 # path to strip.
 
-STRIP_FROM_PATH        = 
+STRIP_FROM_PATH        =
 
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of 
-# the path mentioned in the documentation of a class, which tells 
-# the reader which header file to include in order to use a class. 
-# If left blank only the name of the header file containing the class 
-# definition is used. Otherwise one should specify the include paths that 
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
+# the path mentioned in the documentation of a class, which tells
+# the reader which header file to include in order to use a class.
+# If left blank only the name of the header file containing the class
+# definition is used. Otherwise one should specify the include paths that
 # are normally passed to the compiler using the -I flag.
 
-STRIP_FROM_INC_PATH    = 
+STRIP_FROM_INC_PATH    =
 
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter 
-# (but less readable) file names. This can be useful is your file systems 
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
 # doesn't support long names like on DOS, Mac, or CD-ROM.
 
 SHORT_NAMES            = NO
 
-# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen 
-# will interpret the first line (until the first dot) of a JavaDoc-style 
-# comment as the brief description. If set to NO, the JavaDoc 
-# comments will behave just like the Qt-style comments (thus requiring an 
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like the Qt-style comments (thus requiring an
 # explicit @brief command for a brief description.
 
 JAVADOC_AUTOBRIEF      = YES
 
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen 
-# treat a multi-line C++ special comment block (i.e. a block of //! or /// 
-# comments) as a brief description. This used to be the default behaviour. 
-# The new default is to treat a multi-line C++ comment block as a detailed 
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
 # description. Set this tag to YES if you prefer the old behaviour instead.
 
 MULTILINE_CPP_IS_BRIEF = NO
 
-# If the DETAILS_AT_TOP tag is set to YES then Doxygen 
+# If the DETAILS_AT_TOP tag is set to YES then Doxygen
 # will output the detailed description near the top, like JavaDoc.
-# If set to NO, the detailed description appears after the member 
+# If set to NO, the detailed description appears after the member
 # documentation.
 
 DETAILS_AT_TOP         = NO
 
-# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented 
-# member inherits the documentation from any documented member that it 
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
 # re-implements.
 
 INHERIT_DOCS           = YES
 
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC 
-# tag is set to YES, then doxygen will reuse the documentation of the first 
-# member in the group (if any) for the other members of the group. By default 
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
 # all members of a group must be documented explicitly.
 
 DISTRIBUTE_GROUP_DOC   = NO
 
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. 
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
 # Doxygen uses this value to replace tabs by spaces in code fragments.
 
 TAB_SIZE               = 4
 
-# This tag can be used to specify a number of aliases that acts 
-# as commands in the documentation. An alias has the form "name=value". 
-# For example adding "sideeffect=\par Side Effects:\n" will allow you to 
-# put the command \sideeffect (or @sideeffect) in the documentation, which 
-# will result in a user-defined paragraph with heading "Side Effects:". 
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
 # You can put \n's in the value part of an alias to insert newlines.
 
-ALIASES                = 
+ALIASES                =
 
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources 
-# only. Doxygen will then generate output that is more tailored for C. 
-# For instance, some of the names that are used will be different. The list 
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
 # of all members will be omitted, etc.
 
 OPTIMIZE_OUTPUT_FOR_C  = YES
 
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources 
-# only. Doxygen will then generate output that is more tailored for Java. 
-# For instance, namespaces will be presented as packages, qualified scopes 
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources
+# only. Doxygen will then generate output that is more tailored for Java.
+# For instance, namespaces will be presented as packages, qualified scopes
 # will look different, etc.
 
 OPTIMIZE_OUTPUT_JAVA   = NO
 
-# Set the SUBGROUPING tag to YES (the default) to allow class member groups of 
-# the same type (for instance a group of public functions) to be put as a 
-# subgroup of that type (e.g. under the Public Functions section). Set it to 
-# NO to prevent subgrouping. Alternatively, this can be done per class using 
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
 # the \nosubgrouping command.
 
 SUBGROUPING            = YES
@@ -207,162 +207,162 @@ SUBGROUPING            = YES
 # Build related configuration options
 #---------------------------------------------------------------------------
 
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in 
-# documentation are documented, even if no documentation was available. 
-# Private class members and static file members will be hidden unless 
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
 # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
 
 EXTRACT_ALL            = YES
 
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class 
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
 # will be included in the documentation.
 
 EXTRACT_PRIVATE        = NO
 
-# If the EXTRACT_STATIC tag is set to YES all static members of a file 
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
 # will be included in the documentation.
 
 EXTRACT_STATIC         = NO
 
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) 
-# defined locally in source files will be included in the documentation. 
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
 # If set to NO only classes defined in header files are included.
 
 EXTRACT_LOCAL_CLASSES  = YES
 
-# This flag is only useful for Objective-C code. When set to YES local 
-# methods, which are defined in the implementation section but not in 
-# the interface are included in the documentation. 
+# This flag is only useful for Objective-C code. When set to YES local
+# methods, which are defined in the implementation section but not in
+# the interface are included in the documentation.
 # If set to NO (the default) only methods in the interface are included.
 
 EXTRACT_LOCAL_METHODS  = NO
 
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all 
-# undocumented members of documented classes, files or namespaces. 
-# If set to NO (the default) these members will be included in the 
-# various overviews, but no documentation section is generated. 
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
 # This option has no effect if EXTRACT_ALL is enabled.
 
 HIDE_UNDOC_MEMBERS     = NO
 
-# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all 
-# undocumented classes that are normally visible in the class hierarchy. 
-# If set to NO (the default) these classes will be included in the various 
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
 # overviews. This option has no effect if EXTRACT_ALL is enabled.
 
 HIDE_UNDOC_CLASSES     = NO
 
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all 
-# friend (class|struct|union) declarations. 
-# If set to NO (the default) these declarations will be included in the 
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
 # documentation.
 
 HIDE_FRIEND_COMPOUNDS  = NO
 
-# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any 
-# documentation blocks found inside the body of a function. 
-# If set to NO (the default) these blocks will be appended to the 
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
 # function's detailed documentation block.
 
 HIDE_IN_BODY_DOCS      = NO
 
-# The INTERNAL_DOCS tag determines if documentation 
-# that is typed after a \internal command is included. If the tag is set 
-# to NO (the default) then the documentation will be excluded. 
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
 # Set it to YES to include the internal documentation.
 
 INTERNAL_DOCS          = NO
 
-# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate 
-# file names in lower-case letters. If set to YES upper-case letters are also 
-# allowed. This is useful if you have classes or files whose names only differ 
-# in case and if your file system supports case sensitive file names. Windows 
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
 # and Mac users are advised to set this option to NO.
 
 CASE_SENSE_NAMES       = YES
 
-# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen 
-# will show members with their full class and namespace scopes in the 
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
 # documentation. If set to YES the scope will be hidden.
 
 HIDE_SCOPE_NAMES       = NO
 
-# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen 
-# will put a list of the files that are included by a file in the documentation 
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
 # of that file.
 
 SHOW_INCLUDE_FILES     = NO
 
-# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] 
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
 # is inserted in the documentation for inline members.
 
 INLINE_INFO            = YES
 
-# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen 
-# will sort the (detailed) documentation of file and class members 
-# alphabetically by member name. If set to NO the members will appear in 
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
 # declaration order.
 
 SORT_MEMBER_DOCS       = YES
 
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the 
-# brief documentation of file, namespace and class members alphabetically 
-# by member name. If set to NO (the default) the members will appear in 
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
 # declaration order.
 
 SORT_BRIEF_DOCS        = NO
 
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be 
-# sorted by fully-qualified names, including namespaces. If set to 
-# NO (the default), the class list will be sorted only by class name, 
-# not including the namespace part. 
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the 
+# Note: This option applies only to the class list, not to the
 # alphabetical list.
 
 SORT_BY_SCOPE_NAME     = NO
 
-# The GENERATE_TODOLIST tag can be used to enable (YES) or 
-# disable (NO) the todo list. This list is created by putting \todo 
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
 # commands in the documentation.
 
 GENERATE_TODOLIST      = NO
 
-# The GENERATE_TESTLIST tag can be used to enable (YES) or 
-# disable (NO) the test list. This list is created by putting \test 
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
 # commands in the documentation.
 
 GENERATE_TESTLIST      = NO
 
-# The GENERATE_BUGLIST tag can be used to enable (YES) or 
-# disable (NO) the bug list. This list is created by putting \bug 
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
 # commands in the documentation.
 
 GENERATE_BUGLIST       = NO
 
-# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or 
-# disable (NO) the deprecated list. This list is created by putting 
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
 # \deprecated commands in the documentation.
 
 GENERATE_DEPRECATEDLIST= NO
 
-# The ENABLED_SECTIONS tag can be used to enable conditional 
+# The ENABLED_SECTIONS tag can be used to enable conditional
 # documentation sections, marked by \if sectionname ... \endif.
 
-ENABLED_SECTIONS       = 
+ENABLED_SECTIONS       =
 
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines 
-# the initial value of a variable or define consists of for it to appear in 
-# the documentation. If the initializer consists of more lines than specified 
-# here it will be hidden. Use a value of 0 to hide initializers completely. 
-# The appearance of the initializer of individual variables and defines in the 
-# documentation can be controlled using \showinitializer or \hideinitializer 
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
 # command in the documentation regardless of this setting.
 
 MAX_INITIALIZER_LINES  = 30
 
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated 
-# at the bottom of the documentation of classes and structs. If set to YES the 
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
 # list will mention the files that were used to generate the documentation.
 
 SHOW_USED_FILES        = YES
@@ -371,133 +371,133 @@ SHOW_USED_FILES        = YES
 # configuration options related to warning and progress messages
 #---------------------------------------------------------------------------
 
-# The QUIET tag can be used to turn on/off the messages that are generated 
+# The QUIET tag can be used to turn on/off the messages that are generated
 # by doxygen. Possible values are YES and NO. If left blank NO is used.
 
 QUIET                  = NO
 
-# The WARNINGS tag can be used to turn on/off the warning messages that are 
-# generated by doxygen. Possible values are YES and NO. If left blank 
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
 # NO is used.
 
 WARNINGS               = YES
 
-# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings 
-# for undocumented members. If EXTRACT_ALL is set to YES then this flag will 
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
 # automatically be disabled.
 
 WARN_IF_UNDOCUMENTED   = YES
 
-# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for 
-# potential errors in the documentation, such as not documenting some 
-# parameters in a documented function, or documenting parameters that 
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
 # don't exist or using markup commands wrongly.
 
 WARN_IF_DOC_ERROR      = YES
 
-# The WARN_FORMAT tag determines the format of the warning messages that 
-# doxygen can produce. The string should contain the $file, $line, and $text 
-# tags, which will be replaced by the file and line number from which the 
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
 # warning originated and the warning text.
 
 WARN_FORMAT            = "$file:$line: $text"
 
-# The WARN_LOGFILE tag can be used to specify a file to which warning 
-# and error messages should be written. If left blank the output is written 
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
 # to stderr.
 
-WARN_LOGFILE           = 
+WARN_LOGFILE           =
 
 #---------------------------------------------------------------------------
 # configuration options related to the input files
 #---------------------------------------------------------------------------
 
-# The INPUT tag can be used to specify the files and/or directories that contain 
-# documented source files. You may enter file names like "myfile.cpp" or 
-# directories like "/usr/src/myproject". Separate the files or directories 
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
 # with spaces.
 
-INPUT                  = ../src/pulse/context.h ../src/pulse/stream.h ../src/pulse/pulseaudio.h ../src/pulse/sample.h ../src/pulse/def.h ../src/pulse/subscribe.h ../src/pulse/introspect.h ../src/pulse/scache.h ../src/pulse/mainloop-api.h ../src/pulse/glib-mainloop.h ../src/pulse/mainloop.h ../src/pulse/mainloop-signal.h ../src/pulse/error.h ../src/pulse/operation.h ../src/pulse/simple.h ../src/pulse/version.h ../src/pulse/volume.h ../src/pulse/channelmap.h ../src/pulse/thread-mainloop.h ../src/pulse/xmalloc.h ../src/pulse/utf8.h ../src/pulse/util.h ../src/pulse/timeval.h ../src/pulse/proplist.h ../src/pulse/gccmacro.h
+INPUT                  = ../src/pulse/context.h ../src/pulse/stream.h ../src/pulse/pulseaudio.h ../src/pulse/sample.h ../src/pulse/def.h ../src/pulse/subscribe.h ../src/pulse/introspect.h ../src/pulse/scache.h ../src/pulse/mainloop-api.h ../src/pulse/glib-mainloop.h ../src/pulse/mainloop.h ../src/pulse/mainloop-signal.h ../src/pulse/error.h ../src/pulse/operation.h ../src/pulse/simple.h ../src/pulse/version.h ../src/pulse/volume.h ../src/pulse/channelmap.h ../src/pulse/thread-mainloop.h ../src/pulse/xmalloc.h ../src/pulse/utf8.h ../src/pulse/util.h ../src/pulse/timeval.h ../src/pulse/proplist.h ../src/pulse/gccmacro.h ../src/pulse/ext-stream-restore.h
 
-# If the value of the INPUT tag contains directories, you can use the 
-# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
-# and *.h) to filter out the source-files in the directories. If left 
-# blank the following patterns are tested: 
-# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp 
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp
 # *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm
 
-FILE_PATTERNS          = 
+FILE_PATTERNS          =
 
-# The RECURSIVE tag can be used to turn specify whether or not subdirectories 
-# should be searched for input files as well. Possible values are YES and NO. 
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
 # If left blank NO is used.
 
 RECURSIVE              = NO
 
-# The EXCLUDE tag can be used to specify files and/or directories that should 
-# excluded from the INPUT source files. This way you can easily exclude a 
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
 # subdirectory from a directory tree whose root is specified with the INPUT tag.
 
-EXCLUDE                = 
+EXCLUDE                =
 
-# The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories 
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories
 # that are symbolic links (a Unix filesystem feature) are excluded from the input.
 
 EXCLUDE_SYMLINKS       = NO
 
-# If the value of the INPUT tag contains directories, you can use the 
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude 
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
 # certain files from those directories.
 
-EXCLUDE_PATTERNS       = 
+EXCLUDE_PATTERNS       =
 
-# The EXAMPLE_PATH tag can be used to specify one or more files or 
-# directories that contain example code fragments that are included (see 
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
 # the \include command).
 
 EXAMPLE_PATH           = ../src/utils ../src/tests
 
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the 
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
-# and *.h) to filter out the source-files in the directories. If left 
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
 # blank all files are included.
 
-EXAMPLE_PATTERNS       = 
+EXAMPLE_PATTERNS       =
 
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be 
-# searched for input files to be used with the \include or \dontinclude 
-# commands irrespective of the value of the RECURSIVE tag. 
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
 # Possible values are YES and NO. If left blank NO is used.
 
 EXAMPLE_RECURSIVE      = NO
 
-# The IMAGE_PATH tag can be used to specify one or more files or 
-# directories that contain image that are included in the documentation (see 
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
 # the \image command).
 
-IMAGE_PATH             = 
+IMAGE_PATH             =
 
-# The INPUT_FILTER tag can be used to specify a program that doxygen should 
-# invoke to filter for each input file. Doxygen will invoke the filter program 
-# by executing (via popen()) the command <filter> <input-file>, where <filter> 
-# is the value of the INPUT_FILTER tag, and <input-file> is the name of an 
-# input file. Doxygen will then use the output that the filter program writes 
-# to standard output.  If FILTER_PATTERNS is specified, this tag will be 
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.  If FILTER_PATTERNS is specified, this tag will be
 # ignored.
 
-INPUT_FILTER           = 
+INPUT_FILTER           =
 
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern 
-# basis.  Doxygen will compare the file name with each pattern and apply the 
-# filter if there is a match.  The filters are a list of the form: 
-# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further 
-# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER 
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis.  Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match.  The filters are a list of the form:
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
 # is applied to all files.
 
-FILTER_PATTERNS        = 
+FILTER_PATTERNS        =
 
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using 
-# INPUT_FILTER) will be used to filter the input files when producing source 
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
 # files to browse (i.e. when SOURCE_BROWSER is set to YES).
 
 FILTER_SOURCE_FILES    = NO
@@ -506,38 +506,38 @@ FILTER_SOURCE_FILES    = NO
 # configuration options related to source browsing
 #---------------------------------------------------------------------------
 
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will 
-# be generated. Documented entities will be cross-referenced with these sources. 
-# Note: To get rid of all source code in the generated output, make sure also 
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
 # VERBATIM_HEADERS is set to NO.
 
 SOURCE_BROWSER         = NO
 
-# Setting the INLINE_SOURCES tag to YES will include the body 
+# Setting the INLINE_SOURCES tag to YES will include the body
 # of functions and classes directly in the documentation.
 
 INLINE_SOURCES         = NO
 
-# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct 
-# doxygen to hide any special comment blocks from generated source code 
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
 # fragments. Normal C and C++ comments will always remain visible.
 
 STRIP_CODE_COMMENTS    = YES
 
-# If the REFERENCED_BY_RELATION tag is set to YES (the default) 
-# then for each documented function all documented 
+# If the REFERENCED_BY_RELATION tag is set to YES (the default)
+# then for each documented function all documented
 # functions referencing it will be listed.
 
 REFERENCED_BY_RELATION = YES
 
-# If the REFERENCES_RELATION tag is set to YES (the default) 
-# then for each documented function all documented entities 
+# If the REFERENCES_RELATION tag is set to YES (the default)
+# then for each documented function all documented entities
 # called/used by that function will be listed.
 
 REFERENCES_RELATION    = YES
 
-# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen 
-# will generate a verbatim copy of the header file for each class for 
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
 # which an include is specified. Set to NO to disable this.
 
 VERBATIM_HEADERS       = YES
@@ -546,21 +546,21 @@ VERBATIM_HEADERS       = YES
 # configuration options related to the alphabetical class index
 #---------------------------------------------------------------------------
 
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index 
-# of all compounds will be generated. Enable this if the project 
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
 # contains a lot of classes, structs, unions or interfaces.
 
 ALPHABETICAL_INDEX     = YES
 
-# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then 
-# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns 
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
 # in which this list will be split (can be a number in the range [1..20])
 
 COLS_IN_ALPHA_INDEX    = 5
 
-# In case all classes in a project start with a common prefix, all 
-# classes will be put under the same header in the alphabetical index. 
-# The IGNORE_PREFIX tag can be used to specify one or more prefixes that 
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
 # should be ignored while generating the index headers.
 
 IGNORE_PREFIX          = pa_ PA_
@@ -569,110 +569,110 @@ IGNORE_PREFIX          = pa_ PA_
 # configuration options related to the HTML output
 #---------------------------------------------------------------------------
 
-# If the GENERATE_HTML tag is set to YES (the default) Doxygen will 
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
 # generate HTML output.
 
 GENERATE_HTML          = YES
 
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. 
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
 # put in front of it. If left blank `html' will be used as the default path.
 
 HTML_OUTPUT            = html
 
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for 
-# each generated HTML page (for example: .htm,.php,.asp). If it is left blank 
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
 # doxygen will generate files with .html extension.
 
 HTML_FILE_EXTENSION    = .html
 
-# The HTML_HEADER tag can be used to specify a personal HTML header for 
-# each generated HTML page. If it is left blank doxygen will generate a 
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
 # standard header.
 
-HTML_HEADER            = 
+HTML_HEADER            =
 
-# The HTML_FOOTER tag can be used to specify a personal HTML footer for 
-# each generated HTML page. If it is left blank doxygen will generate a 
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
 # standard footer.
 
-HTML_FOOTER            = 
+HTML_FOOTER            =
 
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading 
-# style sheet that is used by each HTML page. It can be used to 
-# fine-tune the look of the HTML output. If the tag is left blank doxygen 
-# will generate a default style sheet. Note that doxygen will try to copy 
-# the style sheet file to the HTML output directory, so don't put your own 
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
 # stylesheet in the HTML output directory as well, or it will be erased!
 
-HTML_STYLESHEET        = 
+HTML_STYLESHEET        =
 
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, 
-# files or namespaces will be aligned in HTML using tables. If set to 
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
 # NO a bullet list will be used.
 
 HTML_ALIGN_MEMBERS     = YES
 
-# If the GENERATE_HTMLHELP tag is set to YES, additional index files 
-# will be generated that can be used as input for tools like the 
-# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) 
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
 # of the generated HTML documentation.
 
 GENERATE_HTMLHELP      = NO
 
-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can 
-# be used to specify the file name of the resulting .chm file. You 
-# can add a path in front of the file if the result should not be 
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
 # written to the html output directory.
 
-CHM_FILE               = 
+CHM_FILE               =
 
-# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can 
-# be used to specify the location (absolute path including file name) of 
-# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run 
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
 # the HTML help compiler on the generated index.hhp.
 
-HHC_LOCATION           = 
+HHC_LOCATION           =
 
-# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag 
-# controls if a separate .chi index file is generated (YES) or that 
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
 # it should be included in the master .chm file (NO).
 
 GENERATE_CHI           = NO
 
-# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag 
-# controls whether a binary table of contents is generated (YES) or a 
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
 # normal table of contents (NO) in the .chm file.
 
 BINARY_TOC             = NO
 
-# The TOC_EXPAND flag can be set to YES to add extra items for group members 
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
 # to the contents of the HTML help documentation and to the tree view.
 
 TOC_EXPAND             = NO
 
-# The DISABLE_INDEX tag can be used to turn on/off the condensed index at 
-# top of each HTML page. The value NO (the default) enables the index and 
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
 # the value YES disables it.
 
 DISABLE_INDEX          = NO
 
-# This tag can be used to set the number of enum values (range [1..20]) 
+# This tag can be used to set the number of enum values (range [1..20])
 # that doxygen will group on one line in the generated HTML documentation.
 
 ENUM_VALUES_PER_LINE   = 1
 
 # If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
-# generated containing a tree-like index structure (just like the one that 
-# is generated for HTML Help). For this to work a browser that supports 
-# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, 
-# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are 
+# generated containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
+# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
 # probably better off using the HTML help feature.
 
 GENERATE_TREEVIEW      = YES
 
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be 
-# used to set the initial width (in pixels) of the frame in which the tree 
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
 # is shown.
 
 TREEVIEW_WIDTH         = 250
@@ -681,74 +681,74 @@ TREEVIEW_WIDTH         = 250
 # configuration options related to the LaTeX output
 #---------------------------------------------------------------------------
 
-# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will 
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
 # generate Latex output.
 
 GENERATE_LATEX         = NO
 
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. 
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
 # put in front of it. If left blank `latex' will be used as the default path.
 
 LATEX_OUTPUT           = latex
 
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be 
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
 # invoked. If left blank `latex' will be used as the default command name.
 
 LATEX_CMD_NAME         = latex
 
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to 
-# generate index for LaTeX. If left blank `makeindex' will be used as the 
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
 # default command name.
 
 MAKEINDEX_CMD_NAME     = makeindex
 
-# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact 
-# LaTeX documents. This may be useful for small projects and may help to 
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
 # save some trees in general.
 
 COMPACT_LATEX          = NO
 
-# The PAPER_TYPE tag can be used to set the paper type that is used 
-# by the printer. Possible values are: a4, a4wide, letter, legal and 
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
 # executive. If left blank a4wide will be used.
 
 PAPER_TYPE             = a4wide
 
-# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX 
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
 # packages that should be included in the LaTeX output.
 
-EXTRA_PACKAGES         = 
+EXTRA_PACKAGES         =
 
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for 
-# the generated latex document. The header should contain everything until 
-# the first chapter. If it is left blank doxygen will generate a 
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
 # standard header. Notice: only use this tag if you know what you are doing!
 
-LATEX_HEADER           = 
+LATEX_HEADER           =
 
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated 
-# is prepared for conversion to pdf (using ps2pdf). The pdf file will 
-# contain links (just like the HTML output) instead of page references 
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
 # This makes the output suitable for online browsing using a pdf viewer.
 
 PDF_HYPERLINKS         = NO
 
-# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of 
-# plain latex in the generated Makefile. Set this option to YES to get a 
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
 # higher quality PDF documentation.
 
 USE_PDFLATEX           = NO
 
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. 
-# command to the generated LaTeX files. This will instruct LaTeX to keep 
-# running if errors occur, instead of asking the user for help. 
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
 # This option is also used when generating formulas in HTML.
 
 LATEX_BATCHMODE        = NO
 
-# If LATEX_HIDE_INDICES is set to YES then doxygen will not 
-# include the index chapters (such as File Index, Compound Index, etc.) 
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
 # in the output.
 
 LATEX_HIDE_INDICES     = NO
@@ -757,68 +757,68 @@ LATEX_HIDE_INDICES     = NO
 # configuration options related to the RTF output
 #---------------------------------------------------------------------------
 
-# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output 
-# The RTF output is optimized for Word 97 and may not look very pretty with 
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
 # other RTF readers or editors.
 
 GENERATE_RTF           = NO
 
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. 
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
 # put in front of it. If left blank `rtf' will be used as the default path.
 
 RTF_OUTPUT             = rtf
 
-# If the COMPACT_RTF tag is set to YES Doxygen generates more compact 
-# RTF documents. This may be useful for small projects and may help to 
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
 # save some trees in general.
 
 COMPACT_RTF            = NO
 
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated 
-# will contain hyperlink fields. The RTF file will 
-# contain links (just like the HTML output) instead of page references. 
-# This makes the output suitable for online browsing using WORD or other 
-# programs which support those fields. 
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
 # Note: wordpad (write) and others do not support links.
 
 RTF_HYPERLINKS         = NO
 
-# Load stylesheet definitions from file. Syntax is similar to doxygen's 
-# config file, i.e. a series of assignments. You only have to provide 
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
 # replacements, missing definitions are set to their default value.
 
-RTF_STYLESHEET_FILE    = 
+RTF_STYLESHEET_FILE    =
 
-# Set optional variables used in the generation of an rtf document. 
+# Set optional variables used in the generation of an rtf document.
 # Syntax is similar to doxygen's config file.
 
-RTF_EXTENSIONS_FILE    = 
+RTF_EXTENSIONS_FILE    =
 
 #---------------------------------------------------------------------------
 # configuration options related to the man page output
 #---------------------------------------------------------------------------
 
-# If the GENERATE_MAN tag is set to YES (the default) Doxygen will 
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
 # generate man pages
 
 GENERATE_MAN           = NO
 
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. 
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
 # put in front of it. If left blank `man' will be used as the default path.
 
 MAN_OUTPUT             = man
 
-# The MAN_EXTENSION tag determines the extension that is added to 
+# The MAN_EXTENSION tag determines the extension that is added to
 # the generated man pages (default is the subroutine's section .3)
 
 MAN_EXTENSION          = .3
 
-# If the MAN_LINKS tag is set to YES and Doxygen generates man output, 
-# then it will generate one additional man file for each entity 
-# documented in the real man page(s). These additional files 
-# only source the real man page, but without them the man command 
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
 # would be unable to find the correct page. The default is NO.
 
 MAN_LINKS              = NO
@@ -827,33 +827,33 @@ MAN_LINKS              = NO
 # configuration options related to the XML output
 #---------------------------------------------------------------------------
 
-# If the GENERATE_XML tag is set to YES Doxygen will 
-# generate an XML file that captures the structure of 
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
 # the code including all documentation.
 
 GENERATE_XML           = NO
 
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. 
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
 # put in front of it. If left blank `xml' will be used as the default path.
 
 XML_OUTPUT             = xml
 
-# The XML_SCHEMA tag can be used to specify an XML schema, 
-# which can be used by a validating XML parser to check the 
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
 # syntax of the XML files.
 
-XML_SCHEMA             = 
+XML_SCHEMA             =
 
-# The XML_DTD tag can be used to specify an XML DTD, 
-# which can be used by a validating XML parser to check the 
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
 # syntax of the XML files.
 
-XML_DTD                = 
+XML_DTD                =
 
-# If the XML_PROGRAMLISTING tag is set to YES Doxygen will 
-# dump the program listings (including syntax highlighting 
-# and cross-referencing information) to the XML output. Note that 
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
 # enabling this will significantly increase the size of the XML output.
 
 XML_PROGRAMLISTING     = YES
@@ -862,10 +862,10 @@ XML_PROGRAMLISTING     = YES
 # configuration options for the AutoGen Definitions output
 #---------------------------------------------------------------------------
 
-# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will 
-# generate an AutoGen Definitions (see autogen.sf.net) file 
-# that captures the structure of the code including all 
-# documentation. Note that this feature is still experimental 
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
 # and incomplete at the moment.
 
 GENERATE_AUTOGEN_DEF   = NO
@@ -874,283 +874,282 @@ GENERATE_AUTOGEN_DEF   = NO
 # configuration options related to the Perl module output
 #---------------------------------------------------------------------------
 
-# If the GENERATE_PERLMOD tag is set to YES Doxygen will 
-# generate a Perl module file that captures the structure of 
-# the code including all documentation. Note that this 
-# feature is still experimental and incomplete at the 
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
 # moment.
 
 GENERATE_PERLMOD       = NO
 
-# If the PERLMOD_LATEX tag is set to YES Doxygen will generate 
-# the necessary Makefile rules, Perl scripts and LaTeX code to be able 
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
 # to generate PDF and DVI output from the Perl module output.
 
 PERLMOD_LATEX          = NO
 
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be 
-# nicely formatted so it can be parsed by a human reader.  This is useful 
-# if you want to understand what is going on.  On the other hand, if this 
-# tag is set to NO the size of the Perl module output will be much smaller 
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader.  This is useful
+# if you want to understand what is going on.  On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
 # and Perl will parse it just the same.
 
 PERLMOD_PRETTY         = YES
 
-# The names of the make variables in the generated doxyrules.make file 
-# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. 
-# This is useful so different doxyrules.make files included by the same 
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
 # Makefile don't overwrite each other's variables.
 
-PERLMOD_MAKEVAR_PREFIX = 
+PERLMOD_MAKEVAR_PREFIX =
 
 #---------------------------------------------------------------------------
-# Configuration options related to the preprocessor   
+# Configuration options related to the preprocessor
 #---------------------------------------------------------------------------
 
-# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will 
-# evaluate all C-preprocessor directives found in the sources and include 
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
 # files.
 
 ENABLE_PREPROCESSING   = YES
 
-# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro 
-# names in the source code. If set to NO (the default) only conditional 
-# compilation will be performed. Macro expansion can be done in a controlled 
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
 # way by setting EXPAND_ONLY_PREDEF to YES.
 
 MACRO_EXPANSION        = YES
 
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES 
-# then the macro expansion is limited to the macros specified with the 
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
 # PREDEFINED and EXPAND_AS_PREDEFINED tags.
 
 EXPAND_ONLY_PREDEF     = YES
 
-# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files 
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
 # in the INCLUDE_PATH (see below) will be search if a #include is found.
 
 SEARCH_INCLUDES        = YES
 
-# The INCLUDE_PATH tag can be used to specify one or more directories that 
-# contain include files that are not input files but should be processed by 
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
 # the preprocessor.
 
-INCLUDE_PATH           = 
+INCLUDE_PATH           =
 
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard 
-# patterns (like *.h and *.hpp) to filter out the header-files in the 
-# directories. If left blank, the patterns specified with FILE_PATTERNS will 
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
 # be used.
 
-INCLUDE_FILE_PATTERNS  = 
+INCLUDE_FILE_PATTERNS  =
 
-# The PREDEFINED tag can be used to specify one or more macro names that 
-# are defined before the preprocessor is started (similar to the -D option of 
-# gcc). The argument of the tag is a list of macros of the form: name 
-# or name=definition (no spaces). If the definition and the = are 
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
 # omitted =1 is assumed.
 
 PREDEFINED             = PA_C_DECL_BEGIN= PA_C_DECL_END=
 
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then 
-# this tag can be used to specify a list of macro names that should be expanded. 
-# The macro definition that is found in the sources will be used. 
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
 # Use the PREDEFINED tag if you want to use a different macro definition.
 
 #EXPAND_AS_DEFINED      = PA_C_DECL_BEGIN, PA_C_DECL_END
 
-# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then 
-# doxygen's preprocessor will remove all function-like macros that are alone 
-# on a line, have an all uppercase name, and do not end with a semicolon. Such 
-# function macros are typically used for boiler-plate code, and will confuse the 
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse the
 # parser if not removed.
 
 SKIP_FUNCTION_MACROS   = YES
 
 #---------------------------------------------------------------------------
-# Configuration::additions related to external references   
+# Configuration::additions related to external references
 #---------------------------------------------------------------------------
 
-# The TAGFILES option can be used to specify one or more tagfiles. 
-# Optionally an initial location of the external documentation 
-# can be added for each tagfile. The format of a tag file without 
-# this location is as follows: 
-#   TAGFILES = file1 file2 ... 
-# Adding location for the tag files is done as follows: 
-#   TAGFILES = file1=loc1 "file2 = loc2" ... 
-# where "loc1" and "loc2" can be relative or absolute paths or 
-# URLs. If a location is present for each tag, the installdox tool 
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+#   TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+#   TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
 # does not have to be run to correct the links.
 # Note that each tag file must have a unique name
 # (where the name does NOT include the path)
-# If a tag file is not located in the directory in which doxygen 
+# If a tag file is not located in the directory in which doxygen
 # is run, you must also specify the path to the tagfile here.
 
-TAGFILES               = 
+TAGFILES               =
 
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create 
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
 # a tag file that is based on the input files it reads.
 
-GENERATE_TAGFILE       = 
+GENERATE_TAGFILE       =
 
-# If the ALLEXTERNALS tag is set to YES all external classes will be listed 
-# in the class index. If set to NO only the inherited external classes 
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
 # will be listed.
 
 ALLEXTERNALS           = NO
 
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed 
-# in the modules index. If set to NO, only the current project's groups will 
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
 # be listed.
 
 EXTERNAL_GROUPS        = YES
 
-# The PERL_PATH should be the absolute path and name of the perl script 
+# The PERL_PATH should be the absolute path and name of the perl script
 # interpreter (i.e. the result of `which perl').
 
 PERL_PATH              = /usr/bin/perl
 
 #---------------------------------------------------------------------------
-# Configuration options related to the dot tool   
+# Configuration options related to the dot tool
 #---------------------------------------------------------------------------
 
-# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will 
-# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base or 
-# super classes. Setting the tag to NO turns the diagrams off. Note that this 
-# option is superseded by the HAVE_DOT option below. This is only a fallback. It is 
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base or
+# super classes. Setting the tag to NO turns the diagrams off. Note that this
+# option is superseded by the HAVE_DOT option below. This is only a fallback. It is
 # recommended to install and use dot, since it yields more powerful graphs.
 
 CLASS_DIAGRAMS         = YES
 
-# If set to YES, the inheritance and collaboration graphs will hide 
-# inheritance and usage relations if the target is undocumented 
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
 # or is not a class.
 
 HIDE_UNDOC_RELATIONS   = YES
 
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is 
-# available from the path. This tool is part of Graphviz, a graph visualization 
-# toolkit from AT&T and Lucent Bell Labs. The other options in this section 
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
 # have no effect if this option is set to NO (the default)
 
 HAVE_DOT               = NO
 
-# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen 
-# will generate a graph for each documented class showing the direct and 
-# indirect inheritance relations. Setting this tag to YES will force the 
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
 # the CLASS_DIAGRAMS tag to NO.
 
 CLASS_GRAPH            = YES
 
-# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen 
-# will generate a graph for each documented class showing the direct and 
-# indirect implementation dependencies (inheritance, containment, and 
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
 # class references variables) of the class with other documented classes.
 
 COLLABORATION_GRAPH    = YES
 
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and 
-# collaboration diagrams in a style similar to the OMG's Unified Modeling 
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
 # Language.
 
 UML_LOOK               = NO
 
-# If set to YES, the inheritance and collaboration graphs will show the 
+# If set to YES, the inheritance and collaboration graphs will show the
 # relations between templates and their instances.
 
 TEMPLATE_RELATIONS     = NO
 
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT 
-# tags are set to YES then doxygen will generate a graph for each documented 
-# file showing the direct and indirect include dependencies of the file with 
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
 # other documented files.
 
 INCLUDE_GRAPH          = YES
 
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and 
-# HAVE_DOT tags are set to YES then doxygen will generate a graph for each 
-# documented header file showing the documented files that directly or 
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
 # indirectly include this file.
 
 INCLUDED_BY_GRAPH      = YES
 
-# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will 
-# generate a call dependency graph for every global function or class method. 
-# Note that enabling this option will significantly increase the time of a run. 
-# So in most cases it will be better to enable call graphs for selected 
+# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will
+# generate a call dependency graph for every global function or class method.
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
 # functions only using the \callgraph command.
 
 CALL_GRAPH             = NO
 
-# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen 
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
 # will graphical hierarchy of all classes instead of a textual one.
 
 GRAPHICAL_HIERARCHY    = YES
 
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images 
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
 # generated by dot. Possible values are png, jpg, or gif
 # If left blank png will be used.
 
 DOT_IMAGE_FORMAT       = png
 
-# The tag DOT_PATH can be used to specify the path where the dot tool can be 
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
 # found. If left blank, it is assumed the dot tool can be found on the path.
 
-DOT_PATH               = 
+DOT_PATH               =
 
-# The DOTFILE_DIRS tag can be used to specify one or more directories that 
-# contain dot files that are included in the documentation (see the 
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
 # \dotfile command).
 
-DOTFILE_DIRS           = 
+DOTFILE_DIRS           =
 
-# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width 
-# (in pixels) of the graphs generated by dot. If a graph becomes larger than 
-# this value, doxygen will try to truncate the graph, so that it fits within 
-# the specified constraint. Beware that most browsers cannot cope with very 
+# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width
+# (in pixels) of the graphs generated by dot. If a graph becomes larger than
+# this value, doxygen will try to truncate the graph, so that it fits within
+# the specified constraint. Beware that most browsers cannot cope with very
 # large images.
 
 MAX_DOT_GRAPH_WIDTH    = 1024
 
-# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height 
-# (in pixels) of the graphs generated by dot. If a graph becomes larger than 
-# this value, doxygen will try to truncate the graph, so that it fits within 
-# the specified constraint. Beware that most browsers cannot cope with very 
+# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height
+# (in pixels) of the graphs generated by dot. If a graph becomes larger than
+# this value, doxygen will try to truncate the graph, so that it fits within
+# the specified constraint. Beware that most browsers cannot cope with very
 # large images.
 
 MAX_DOT_GRAPH_HEIGHT   = 1024
 
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the 
-# graphs generated by dot. A depth value of 3 means that only nodes reachable 
-# from the root by following a path via at most 3 edges will be shown. Nodes that 
-# lay further from the root node will be omitted. Note that setting this option to 
-# 1 or 2 may greatly reduce the computation time needed for large code bases. Also 
-# note that a graph may be further truncated if the graph's image dimensions are 
-# not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH and MAX_DOT_GRAPH_HEIGHT). 
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes that
+# lay further from the root node will be omitted. Note that setting this option to
+# 1 or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that a graph may be further truncated if the graph's image dimensions are
+# not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH and MAX_DOT_GRAPH_HEIGHT).
 # If 0 is used for the depth value (the default), the graph is not depth-constrained.
 
 MAX_DOT_GRAPH_DEPTH    = 0
 
-# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will 
-# generate a legend page explaining the meaning of the various boxes and 
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
 # arrows in the dot generated graphs.
 
 GENERATE_LEGEND        = YES
 
-# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will 
-# remove the intermediate dot files that are used to generate 
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
 # the various graphs.
 
 DOT_CLEANUP            = YES
 
 #---------------------------------------------------------------------------
-# Configuration::additions related to the search engine   
+# Configuration::additions related to the search engine
 #---------------------------------------------------------------------------
 
-# The SEARCHENGINE tag specifies whether or not a search engine should be 
+# The SEARCHENGINE tag specifies whether or not a search engine should be
 # used. If set to NO the values of all tags below this one will be ignored.
 
 SEARCHENGINE           = NO
 
 SHOW_DIRECTORIES=NO
-