/* * Copyright © 2006 Keith Packard * Copyright © 2008 Red Hat, Inc. * * Permission to use, copy, modify, distribute, and sell this software and its * documentation for any purpose is hereby granted without fee, provided that * the above copyright notice appear in all copies and that both that copyright * notice and this permission notice appear in supporting documentation, and * that the name of the copyright holders not be used in advertising or * publicity pertaining to distribution of the software without specific, * written prior permission. The copyright holders make no representations * about the suitability of this software for any purpose. It is provided "as * is" without express or implied warranty. * * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE * OF THIS SOFTWARE. */ #ifdef HAVE_XORG_CONFIG_H #include #else #ifdef HAVE_CONFIG_H #include #endif #endif #include #include #include #include "xf86.h" #include "xf86DDC.h" #include "xf86Crtc.h" #include "xf86Modes.h" #include "xf86Priv.h" #include "xf86RandR12.h" #include "X11/extensions/render.h" #include "X11/extensions/dpmsconst.h" #include "X11/Xatom.h" #include "picturestr.h" #include "xf86xv.h" #define NO_OUTPUT_DEFAULT_WIDTH 1024 #define NO_OUTPUT_DEFAULT_HEIGHT 768 /* * Initialize xf86CrtcConfig structure */ int xf86CrtcConfigPrivateIndex = -1; void xf86CrtcConfigInit (ScrnInfoPtr scrn, const xf86CrtcConfigFuncsRec *funcs) { xf86CrtcConfigPtr config; if (xf86CrtcConfigPrivateIndex == -1) xf86CrtcConfigPrivateIndex = xf86AllocateScrnInfoPrivateIndex(); config = xnfcalloc (1, sizeof (xf86CrtcConfigRec)); config->funcs = funcs; scrn->privates[xf86CrtcConfigPrivateIndex].ptr = config; } void xf86CrtcSetSizeRange (ScrnInfoPtr scrn, int minWidth, int minHeight, int maxWidth, int maxHeight) { xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); config->minWidth = minWidth; config->minHeight = minHeight; config->maxWidth = maxWidth; config->maxHeight = maxHeight; } /* * Crtc functions */ xf86CrtcPtr xf86CrtcCreate (ScrnInfoPtr scrn, const xf86CrtcFuncsRec *funcs) { xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(scrn); xf86CrtcPtr crtc, *crtcs; crtc = calloc(sizeof (xf86CrtcRec), 1); if (!crtc) return NULL; crtc->version = XF86_CRTC_VERSION; crtc->scrn = scrn; crtc->funcs = funcs; #ifdef RANDR_12_INTERFACE crtc->randr_crtc = NULL; #endif crtc->rotation = RR_Rotate_0; crtc->desiredRotation = RR_Rotate_0; pixman_transform_init_identity (&crtc->crtc_to_framebuffer); pixman_f_transform_init_identity (&crtc->f_crtc_to_framebuffer); pixman_f_transform_init_identity (&crtc->f_framebuffer_to_crtc); crtc->filter = NULL; crtc->params = NULL; crtc->nparams = 0; crtc->filter_width = 0; crtc->filter_height = 0; crtc->transform_in_use = FALSE; crtc->transformPresent = FALSE; crtc->desiredTransformPresent = FALSE; memset (&crtc->bounds, '\0', sizeof (crtc->bounds)); /* Preallocate gamma at a sensible size. */ crtc->gamma_size = 256; crtc->gamma_red = malloc(3 * crtc->gamma_size * sizeof (CARD16)); if (!crtc->gamma_red) { free(crtc); return NULL; } crtc->gamma_green = crtc->gamma_red + crtc->gamma_size; crtc->gamma_blue = crtc->gamma_green + crtc->gamma_size; if (xf86_config->crtc) crtcs = realloc(xf86_config->crtc, (xf86_config->num_crtc + 1) * sizeof (xf86CrtcPtr)); else crtcs = malloc((xf86_config->num_crtc + 1) * sizeof (xf86CrtcPtr)); if (!crtcs) { free(crtc); return NULL; } xf86_config->crtc = crtcs; xf86_config->crtc[xf86_config->num_crtc++] = crtc; return crtc; } void xf86CrtcDestroy (xf86CrtcPtr crtc) { xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(crtc->scrn); int c; (*crtc->funcs->destroy) (crtc); for (c = 0; c < xf86_config->num_crtc; c++) if (xf86_config->crtc[c] == crtc) { memmove (&xf86_config->crtc[c], &xf86_config->crtc[c+1], ((xf86_config->num_crtc - (c + 1)) * sizeof(void*))); xf86_config->num_crtc--; break; } free(crtc->params); free(crtc->gamma_red); free(crtc); } /** * Return whether any outputs are connected to the specified pipe */ Bool xf86CrtcInUse (xf86CrtcPtr crtc) { ScrnInfoPtr pScrn = crtc->scrn; xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn); int o; for (o = 0; o < xf86_config->num_output; o++) if (xf86_config->output[o]->crtc == crtc) return TRUE; return FALSE; } void xf86CrtcSetScreenSubpixelOrder (ScreenPtr pScreen) { int subpixel_order = SubPixelUnknown; Bool has_none = FALSE; ScrnInfoPtr scrn = xf86Screens[pScreen->myNum]; xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(scrn); int c, o; for (c = 0; c < xf86_config->num_crtc; c++) { xf86CrtcPtr crtc = xf86_config->crtc[c]; for (o = 0; o < xf86_config->num_output; o++) { xf86OutputPtr output = xf86_config->output[o]; if (output->crtc == crtc) { switch (output->subpixel_order) { case SubPixelNone: has_none = TRUE; break; case SubPixelUnknown: break; default: subpixel_order = output->subpixel_order; break; } } if (subpixel_order != SubPixelUnknown) break; } if (subpixel_order != SubPixelUnknown) { static const int circle[4] = { SubPixelHorizontalRGB, SubPixelVerticalRGB, SubPixelHorizontalBGR, SubPixelVerticalBGR, }; int rotate; int c; for (rotate = 0; rotate < 4; rotate++) if (crtc->rotation & (1 << rotate)) break; for (c = 0; c < 4; c++) if (circle[c] == subpixel_order) break; c = (c + rotate) & 0x3; if ((crtc->rotation & RR_Reflect_X) && !(c & 1)) c ^= 2; if ((crtc->rotation & RR_Reflect_Y) && (c & 1)) c ^= 2; subpixel_order = circle[c]; break; } } if (subpixel_order == SubPixelUnknown && has_none) subpixel_order = SubPixelNone; PictureSetSubpixelOrder (pScreen, subpixel_order); } /** * Sets the given video mode on the given crtc */ Bool xf86CrtcSetModeTransform (xf86CrtcPtr crtc, DisplayModePtr mode, Rotation rotation, RRTransformPtr transform, int x, int y) { ScrnInfoPtr scrn = crtc->scrn; xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(scrn); int i; Bool ret = FALSE; Bool didLock = FALSE; DisplayModePtr adjusted_mode; DisplayModeRec saved_mode; int saved_x, saved_y; Rotation saved_rotation; RRTransformRec saved_transform; Bool saved_transform_present; crtc->enabled = xf86CrtcInUse (crtc); /* We only hit this if someone explicitly sends a "disabled" modeset. */ if (!crtc->enabled) { /* Check everything for stuff that should be off. */ xf86DisableUnusedFunctions(scrn); return TRUE; } adjusted_mode = xf86DuplicateMode(mode); saved_mode = crtc->mode; saved_x = crtc->x; saved_y = crtc->y; saved_rotation = crtc->rotation; if (crtc->transformPresent) { RRTransformInit (&saved_transform); RRTransformCopy (&saved_transform, &crtc->transform); } saved_transform_present = crtc->transformPresent; /* Update crtc values up front so the driver can rely on them for mode * setting. */ crtc->mode = *mode; crtc->x = x; crtc->y = y; crtc->rotation = rotation; if (transform) { RRTransformCopy (&crtc->transform, transform); crtc->transformPresent = TRUE; } else crtc->transformPresent = FALSE; if (crtc->funcs->set_mode_major) { ret = crtc->funcs->set_mode_major(crtc, mode, rotation, x, y); goto done; } didLock = crtc->funcs->lock (crtc); /* Pass our mode to the outputs and the CRTC to give them a chance to * adjust it according to limitations or output properties, and also * a chance to reject the mode entirely. */ for (i = 0; i < xf86_config->num_output; i++) { xf86OutputPtr output = xf86_config->output[i]; if (output->crtc != crtc) continue; if (!output->funcs->mode_fixup(output, mode, adjusted_mode)) { goto done; } } if (!crtc->funcs->mode_fixup(crtc, mode, adjusted_mode)) { goto done; } if (!xf86CrtcRotate (crtc)) goto done; /* Prepare the outputs and CRTCs before setting the mode. */ for (i = 0; i < xf86_config->num_output; i++) { xf86OutputPtr output = xf86_config->output[i]; if (output->crtc != crtc) continue; /* Disable the output as the first thing we do. */ output->funcs->prepare(output); } crtc->funcs->prepare(crtc); /* Set up the DPLL and any output state that needs to adjust or depend * on the DPLL. */ crtc->funcs->mode_set(crtc, mode, adjusted_mode, crtc->x, crtc->y); for (i = 0; i < xf86_config->num_output; i++) { xf86OutputPtr output = xf86_config->output[i]; if (output->crtc == crtc) output->funcs->mode_set(output, mode, adjusted_mode); } /* Only upload when needed, to avoid unneeded delays. */ if (!crtc->active && crtc->funcs->gamma_set) crtc->funcs->gamma_set(crtc, crtc->gamma_red, crtc->gamma_green, crtc->gamma_blue, crtc->gamma_size); /* Now, enable the clocks, plane, pipe, and outputs that we set up. */ crtc->funcs->commit(crtc); for (i = 0; i < xf86_config->num_output; i++) { xf86OutputPtr output = xf86_config->output[i]; if (output->crtc == crtc) output->funcs->commit(output); } ret = TRUE; done: if (ret) { crtc->active = TRUE; if (scrn->pScreen) xf86CrtcSetScreenSubpixelOrder (scrn->pScreen); } else { crtc->x = saved_x; crtc->y = saved_y; crtc->rotation = saved_rotation; crtc->mode = saved_mode; if (saved_transform_present) RRTransformCopy (&crtc->transform, &saved_transform); crtc->transformPresent = saved_transform_present; } free(adjusted_mode->name); free(adjusted_mode); if (didLock) crtc->funcs->unlock (crtc); return ret; } /** * Sets the given video mode on the given crtc, but without providing * a transform */ Bool xf86CrtcSetMode (xf86CrtcPtr crtc, DisplayModePtr mode, Rotation rotation, int x, int y) { return xf86CrtcSetModeTransform (crtc, mode, rotation, NULL, x, y); } /** * Pans the screen, does not change the mode */ void xf86CrtcSetOrigin (xf86CrtcPtr crtc, int x, int y) { crtc->x = x; crtc->y = y; if (crtc->funcs->set_origin) { if (!xf86CrtcRotate (crtc)) return; crtc->funcs->set_origin (crtc, x, y); } else xf86CrtcSetMode (crtc, &crtc->mode, crtc->rotation, x, y); } /* * Output functions */ extern XF86ConfigPtr xf86configptr; typedef enum { OPTION_PREFERRED_MODE, OPTION_POSITION, OPTION_BELOW, OPTION_RIGHT_OF, OPTION_ABOVE, OPTION_LEFT_OF, OPTION_ENABLE, OPTION_DISABLE, OPTION_MIN_CLOCK, OPTION_MAX_CLOCK, OPTION_IGNORE, OPTION_ROTATE, OPTION_PANNING, OPTION_PRIMARY, OPTION_DEFAULT_MODES, } OutputOpts; static OptionInfoRec xf86OutputOptions[] = { {OPTION_PREFERRED_MODE, "PreferredMode", OPTV_STRING, {0}, FALSE }, {OPTION_POSITION, "Position", OPTV_STRING, {0}, FALSE }, {OPTION_BELOW, "Below", OPTV_STRING, {0}, FALSE }, {OPTION_RIGHT_OF, "RightOf", OPTV_STRING, {0}, FALSE }, {OPTION_ABOVE, "Above", OPTV_STRING, {0}, FALSE }, {OPTION_LEFT_OF, "LeftOf", OPTV_STRING, {0}, FALSE }, {OPTION_ENABLE, "Enable", OPTV_BOOLEAN, {0}, FALSE }, {OPTION_DISABLE, "Disable", OPTV_BOOLEAN, {0}, FALSE }, {OPTION_MIN_CLOCK, "MinClock", OPTV_FREQ, {0}, FALSE }, {OPTION_MAX_CLOCK, "MaxClock", OPTV_FREQ, {0}, FALSE }, {OPTION_IGNORE, "Ignore", OPTV_BOOLEAN, {0}, FALSE }, {OPTION_ROTATE, "Rotate", OPTV_STRING, {0}, FALSE }, {OPTION_PANNING, "Panning", OPTV_STRING, {0}, FALSE }, {OPTION_PRIMARY, "Primary", OPTV_BOOLEAN, {0}, FALSE }, {OPTION_DEFAULT_MODES, "DefaultModes", OPTV_BOOLEAN, {0}, FALSE }, {-1, NULL, OPTV_NONE, {0}, FALSE }, }; enum { OPTION_MODEDEBUG, }; static OptionInfoRec xf86DeviceOptions[] = { {OPTION_MODEDEBUG, "ModeDebug", OPTV_BOOLEAN, {0}, FALSE }, {-1, NULL, OPTV_NONE, {0}, FALSE }, }; static void xf86OutputSetMonitor (xf86OutputPtr output) { char *option_name; static const char monitor_prefix[] = "monitor-"; char *monitor; if (!output->name) return; free(output->options); output->options = xnfalloc (sizeof (xf86OutputOptions)); memcpy (output->options, xf86OutputOptions, sizeof (xf86OutputOptions)); option_name = xnfalloc (strlen (monitor_prefix) + strlen (output->name) + 1); strcpy (option_name, monitor_prefix); strcat (option_name, output->name); monitor = xf86findOptionValue (output->scrn->options, option_name); if (!monitor) monitor = output->name; else xf86MarkOptionUsedByName (output->scrn->options, option_name); free(option_name); output->conf_monitor = xf86findMonitor (monitor, xf86configptr->conf_monitor_lst); /* * Find the monitor section of the screen and use that */ if (!output->conf_monitor && output->use_screen_monitor) output->conf_monitor = xf86findMonitor (output->scrn->monitor->id, xf86configptr->conf_monitor_lst); if (output->conf_monitor) { xf86DrvMsg (output->scrn->scrnIndex, X_INFO, "Output %s using monitor section %s\n", output->name, output->conf_monitor->mon_identifier); xf86ProcessOptions (output->scrn->scrnIndex, output->conf_monitor->mon_option_lst, output->options); } else xf86DrvMsg (output->scrn->scrnIndex, X_INFO, "Output %s has no monitor section\n", output->name); } static Bool xf86OutputEnabled (xf86OutputPtr output, Bool strict) { Bool enable, disable; /* check to see if this output was enabled in the config file */ if (xf86GetOptValBool (output->options, OPTION_ENABLE, &enable) && enable) { xf86DrvMsg (output->scrn->scrnIndex, X_INFO, "Output %s enabled by config file\n", output->name); return TRUE; } /* or if this output was disabled in the config file */ if (xf86GetOptValBool (output->options, OPTION_DISABLE, &disable) && disable) { xf86DrvMsg (output->scrn->scrnIndex, X_INFO, "Output %s disabled by config file\n", output->name); return FALSE; } /* If not, try to only light up the ones we know are connected */ if (strict) { enable = output->status == XF86OutputStatusConnected; } /* But if that fails, try to light up even outputs we're unsure of */ else { enable = output->status != XF86OutputStatusDisconnected; } xf86DrvMsg (output->scrn->scrnIndex, X_INFO, "Output %s %sconnected\n", output->name, enable ? "" : "dis"); return enable; } static Bool xf86OutputIgnored (xf86OutputPtr output) { return xf86ReturnOptValBool (output->options, OPTION_IGNORE, FALSE); } static char *direction[4] = { "normal", "left", "inverted", "right" }; static Rotation xf86OutputInitialRotation (xf86OutputPtr output) { char *rotate_name = xf86GetOptValString (output->options, OPTION_ROTATE); int i; if (!rotate_name) return RR_Rotate_0; for (i = 0; i < 4; i++) if (xf86nameCompare (direction[i], rotate_name) == 0) return (1 << i); return RR_Rotate_0; } xf86OutputPtr xf86OutputCreate (ScrnInfoPtr scrn, const xf86OutputFuncsRec *funcs, const char *name) { xf86OutputPtr output, *outputs; xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(scrn); int len; Bool primary; if (name) len = strlen (name) + 1; else len = 0; output = calloc(sizeof (xf86OutputRec) + len, 1); if (!output) return NULL; output->scrn = scrn; output->funcs = funcs; if (name) { output->name = (char *) (output + 1); strcpy (output->name, name); } output->subpixel_order = SubPixelUnknown; /* * Use the old per-screen monitor section for the first output */ output->use_screen_monitor = (xf86_config->num_output == 0); #ifdef RANDR_12_INTERFACE output->randr_output = NULL; #endif if (name) { xf86OutputSetMonitor (output); if (xf86OutputIgnored (output)) { free(output); return FALSE; } } if (xf86_config->output) outputs = realloc(xf86_config->output, (xf86_config->num_output + 1) * sizeof (xf86OutputPtr)); else outputs = malloc((xf86_config->num_output + 1) * sizeof (xf86OutputPtr)); if (!outputs) { free(output); return NULL; } xf86_config->output = outputs; if (xf86GetOptValBool (output->options, OPTION_PRIMARY, &primary) && primary) { memmove(xf86_config->output + 1, xf86_config->output, xf86_config->num_output * sizeof (xf86OutputPtr)); xf86_config->output[0] = output; } else { xf86_config->output[xf86_config->num_output] = output; } xf86_config->num_output++; return output; } Bool xf86OutputRename (xf86OutputPtr output, const char *name) { int len = strlen(name) + 1; char *newname = malloc(len); if (!newname) return FALSE; /* so sorry... */ strcpy (newname, name); if (output->name && output->name != (char *) (output + 1)) free(output->name); output->name = newname; xf86OutputSetMonitor (output); if (xf86OutputIgnored (output)) return FALSE; return TRUE; } void xf86OutputUseScreenMonitor (xf86OutputPtr output, Bool use_screen_monitor) { if (use_screen_monitor != output->use_screen_monitor) { output->use_screen_monitor = use_screen_monitor; xf86OutputSetMonitor (output); } } void xf86OutputDestroy (xf86OutputPtr output) { ScrnInfoPtr scrn = output->scrn; xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(scrn); int o; (*output->funcs->destroy) (output); while (output->probed_modes) xf86DeleteMode (&output->probed_modes, output->probed_modes); for (o = 0; o < xf86_config->num_output; o++) if (xf86_config->output[o] == output) { memmove (&xf86_config->output[o], &xf86_config->output[o+1], ((xf86_config->num_output - (o + 1)) * sizeof(void*))); xf86_config->num_output--; break; } if (output->name && output->name != (char *) (output + 1)) free(output->name); free(output); } /* * Called during CreateScreenResources to hook up RandR */ static Bool xf86CrtcCreateScreenResources (ScreenPtr screen) { ScrnInfoPtr scrn = xf86Screens[screen->myNum]; xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); screen->CreateScreenResources = config->CreateScreenResources; if (!(*screen->CreateScreenResources)(screen)) return FALSE; if (!xf86RandR12CreateScreenResources (screen)) return FALSE; return TRUE; } /* * Clean up config on server reset */ static Bool xf86CrtcCloseScreen (int index, ScreenPtr screen) { ScrnInfoPtr scrn = xf86Screens[screen->myNum]; xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); int o, c; screen->CloseScreen = config->CloseScreen; xf86RotateCloseScreen (screen); for (o = 0; o < config->num_output; o++) { xf86OutputPtr output = config->output[o]; output->randr_output = NULL; } for (c = 0; c < config->num_crtc; c++) { xf86CrtcPtr crtc = config->crtc[c]; crtc->randr_crtc = NULL; } return screen->CloseScreen (index, screen); } /* * Called at ScreenInit time to set up */ #ifdef RANDR_13_INTERFACE int #else Bool #endif xf86CrtcScreenInit (ScreenPtr screen) { ScrnInfoPtr scrn = xf86Screens[screen->myNum]; xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); int c; /* Rotation */ xf86DrvMsg(scrn->scrnIndex, X_INFO, "RandR 1.2 enabled, ignore the following RandR disabled message.\n"); xf86DisableRandR(); /* Disable old RandR extension support */ xf86RandR12Init (screen); /* support all rotations if every crtc has the shadow alloc funcs */ for (c = 0; c < config->num_crtc; c++) { xf86CrtcPtr crtc = config->crtc[c]; if (!crtc->funcs->shadow_allocate || !crtc->funcs->shadow_create) break; } if (c == config->num_crtc) { xf86RandR12SetRotations (screen, RR_Rotate_0 | RR_Rotate_90 | RR_Rotate_180 | RR_Rotate_270 | RR_Reflect_X | RR_Reflect_Y); xf86RandR12SetTransformSupport (screen, TRUE); } else { xf86RandR12SetRotations (screen, RR_Rotate_0); xf86RandR12SetTransformSupport (screen, FALSE); } /* Wrap CreateScreenResources so we can initialize the RandR code */ config->CreateScreenResources = screen->CreateScreenResources; screen->CreateScreenResources = xf86CrtcCreateScreenResources; config->CloseScreen = screen->CloseScreen; screen->CloseScreen = xf86CrtcCloseScreen; #ifdef XFreeXDGA _xf86_di_dga_init_internal(screen); #endif #ifdef RANDR_13_INTERFACE return RANDR_INTERFACE_VERSION; #else return TRUE; #endif } static DisplayModePtr xf86DefaultMode (xf86OutputPtr output, int width, int height) { DisplayModePtr target_mode = NULL; DisplayModePtr mode; int target_diff = 0; int target_preferred = 0; int mm_height; mm_height = output->mm_height; if (!mm_height) mm_height = (768 * 25.4) / DEFAULT_DPI; /* * Pick a mode closest to DEFAULT_DPI */ for (mode = output->probed_modes; mode; mode = mode->next) { int dpi; int preferred = (((mode->type & M_T_PREFERRED) != 0) + ((mode->type & M_T_USERPREF) != 0)); int diff; if (xf86ModeWidth (mode, output->initial_rotation) > width || xf86ModeHeight (mode, output->initial_rotation) > height) continue; /* yes, use VDisplay here, not xf86ModeHeight */ dpi = (mode->VDisplay * 254) / (mm_height * 10); diff = dpi - DEFAULT_DPI; diff = diff < 0 ? -diff : diff; if (target_mode == NULL || (preferred > target_preferred) || (preferred == target_preferred && diff < target_diff)) { target_mode = mode; target_diff = diff; target_preferred = preferred; } } return target_mode; } static DisplayModePtr xf86ClosestMode (xf86OutputPtr output, DisplayModePtr match, Rotation match_rotation, int width, int height) { DisplayModePtr target_mode = NULL; DisplayModePtr mode; int target_diff = 0; /* * Pick a mode closest to the specified mode */ for (mode = output->probed_modes; mode; mode = mode->next) { int dx, dy; int diff; if (xf86ModeWidth (mode, output->initial_rotation) > width || xf86ModeHeight (mode, output->initial_rotation) > height) continue; /* exact matches are preferred */ if (output->initial_rotation == match_rotation && xf86ModesEqual (mode, match)) return mode; dx = xf86ModeWidth (match, match_rotation) - xf86ModeWidth (mode, output->initial_rotation); dy = xf86ModeHeight (match, match_rotation) - xf86ModeHeight (mode, output->initial_rotation); diff = dx * dx + dy * dy; if (target_mode == NULL || diff < target_diff) { target_mode = mode; target_diff = diff; } } return target_mode; } static DisplayModePtr xf86OutputHasPreferredMode (xf86OutputPtr output, int width, int height) { DisplayModePtr mode; for (mode = output->probed_modes; mode; mode = mode->next) { if (xf86ModeWidth (mode, output->initial_rotation) > width || xf86ModeHeight (mode, output->initial_rotation) > height) continue; if (mode->type & M_T_PREFERRED) return mode; } return NULL; } static DisplayModePtr xf86OutputHasUserPreferredMode (xf86OutputPtr output) { DisplayModePtr mode, first = output->probed_modes; for (mode = first; mode && mode->next != first; mode = mode->next) if (mode->type & M_T_USERPREF) return mode; return NULL; } static int xf86PickCrtcs (ScrnInfoPtr scrn, xf86CrtcPtr *best_crtcs, DisplayModePtr *modes, int n, int width, int height) { xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); int c, o; xf86OutputPtr output; xf86CrtcPtr crtc; xf86CrtcPtr *crtcs; xf86CrtcPtr best_crtc; int best_score; int score; int my_score; if (n == config->num_output) return 0; output = config->output[n]; /* * Compute score with this output disabled */ best_crtcs[n] = NULL; best_crtc = NULL; best_score = xf86PickCrtcs (scrn, best_crtcs, modes, n+1, width, height); if (modes[n] == NULL) return best_score; crtcs = malloc(config->num_output * sizeof (xf86CrtcPtr)); if (!crtcs) return best_score; my_score = 1; /* Score outputs that are known to be connected higher */ if (output->status == XF86OutputStatusConnected) my_score++; /* Score outputs with preferred modes higher */ if (xf86OutputHasPreferredMode (output, width, height)) my_score++; /* * Select a crtc for this output and * then attempt to configure the remaining * outputs */ for (c = 0; c < config->num_crtc; c++) { if ((output->possible_crtcs & (1 << c)) == 0) continue; crtc = config->crtc[c]; /* * Check to see if some other output is * using this crtc */ for (o = 0; o < n; o++) if (best_crtcs[o] == crtc) break; if (o < n) { /* * If the two outputs desire the same mode, * see if they can be cloned */ if (xf86ModesEqual (modes[o], modes[n]) && config->output[o]->initial_rotation == config->output[n]->initial_rotation && config->output[o]->initial_x == config->output[n]->initial_x && config->output[o]->initial_y == config->output[n]->initial_y) { if ((output->possible_clones & (1 << o)) == 0) continue; /* nope, try next CRTC */ } else continue; /* different modes, can't clone */ } crtcs[n] = crtc; memcpy (crtcs, best_crtcs, n * sizeof (xf86CrtcPtr)); score = my_score + xf86PickCrtcs (scrn, crtcs, modes, n+1, width, height); if (score > best_score) { best_crtc = crtc; best_score = score; memcpy (best_crtcs, crtcs, config->num_output * sizeof (xf86CrtcPtr)); } } free(crtcs); return best_score; } /* * Compute the virtual size necessary to place all of the available * crtcs in the specified configuration. * * canGrow indicates that the driver can make the screen larger than its initial * configuration. If FALSE, this function will enlarge the screen to include * the largest available mode. */ static void xf86DefaultScreenLimits (ScrnInfoPtr scrn, int *widthp, int *heightp, Bool canGrow) { xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); int width = 0, height = 0; int o; int c; int s; for (c = 0; c < config->num_crtc; c++) { int crtc_width = 0, crtc_height = 0; xf86CrtcPtr crtc = config->crtc[c]; if (crtc->enabled) { crtc_width = crtc->desiredX + xf86ModeWidth (&crtc->desiredMode, crtc->desiredRotation); crtc_height = crtc->desiredY + xf86ModeHeight (&crtc->desiredMode, crtc->desiredRotation); } if (!canGrow) { for (o = 0; o < config->num_output; o++) { xf86OutputPtr output = config->output[o]; for (s = 0; s < config->num_crtc; s++) if (output->possible_crtcs & (1 << s)) { DisplayModePtr mode; for (mode = output->probed_modes; mode; mode = mode->next) { if (mode->HDisplay > crtc_width) crtc_width = mode->HDisplay; if (mode->VDisplay > crtc_width) crtc_width = mode->VDisplay; if (mode->VDisplay > crtc_height) crtc_height = mode->VDisplay; if (mode->HDisplay > crtc_height) crtc_height = mode->HDisplay; } } } } if (crtc_width > width) width = crtc_width; if (crtc_height > height) height = crtc_height; } if (config->maxWidth && width > config->maxWidth) width = config->maxWidth; if (config->maxHeight && height > config->maxHeight) height = config->maxHeight; if (config->minWidth && width < config->minWidth) width = config->minWidth; if (config->minHeight && height < config->minHeight) height = config->minHeight; *widthp = width; *heightp = height; } #define POSITION_UNSET -100000 /* * check if the user configured any outputs at all * with either a position or a relative setting or a mode. */ static Bool xf86UserConfiguredOutputs(ScrnInfoPtr scrn, DisplayModePtr *modes) { xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); int o; Bool user_conf = FALSE; for (o = 0; o < config->num_output; o++) { xf86OutputPtr output = config->output[o]; char *position; char *relative_name; OutputOpts relation; int r; static const OutputOpts relations[] = { OPTION_BELOW, OPTION_RIGHT_OF, OPTION_ABOVE, OPTION_LEFT_OF }; position = xf86GetOptValString (output->options, OPTION_POSITION); if (position) user_conf = TRUE; relation = 0; relative_name = NULL; for (r = 0; r < 4; r++) { relation = relations[r]; relative_name = xf86GetOptValString (output->options, relation); if (relative_name) break; } if (relative_name) user_conf = TRUE; modes[o] = xf86OutputHasUserPreferredMode(output); if (modes[o]) user_conf = TRUE; } return user_conf; } static Bool xf86InitialOutputPositions (ScrnInfoPtr scrn, DisplayModePtr *modes) { xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); int o; int min_x, min_y; for (o = 0; o < config->num_output; o++) { xf86OutputPtr output = config->output[o]; output->initial_x = output->initial_y = POSITION_UNSET; } /* * Loop until all outputs are set */ for (;;) { Bool any_set = FALSE; Bool keep_going = FALSE; for (o = 0; o < config->num_output; o++) { static const OutputOpts relations[] = { OPTION_BELOW, OPTION_RIGHT_OF, OPTION_ABOVE, OPTION_LEFT_OF }; xf86OutputPtr output = config->output[o]; xf86OutputPtr relative; char *relative_name; char *position; OutputOpts relation; int r; if (output->initial_x != POSITION_UNSET) continue; position = xf86GetOptValString (output->options, OPTION_POSITION); /* * Absolute position wins */ if (position) { int x, y; if (sscanf (position, "%d %d", &x, &y) == 2) { output->initial_x = x; output->initial_y = y; } else { xf86DrvMsg (scrn->scrnIndex, X_ERROR, "Output %s position not of form \"x y\"\n", output->name); output->initial_x = output->initial_y = 0; } any_set = TRUE; continue; } /* * Next comes relative positions */ relation = 0; relative_name = NULL; for (r = 0; r < 4; r++) { relation = relations[r]; relative_name = xf86GetOptValString (output->options, relation); if (relative_name) break; } if (relative_name) { int or; relative = NULL; for (or = 0; or < config->num_output; or++) { xf86OutputPtr out_rel = config->output[or]; XF86ConfMonitorPtr rel_mon = out_rel->conf_monitor; if (rel_mon) { if (xf86nameCompare (rel_mon->mon_identifier, relative_name) == 0) { relative = config->output[or]; break; } } if (strcmp (out_rel->name, relative_name) == 0) { relative = config->output[or]; break; } } if (!relative) { xf86DrvMsg (scrn->scrnIndex, X_ERROR, "Cannot position output %s relative to unknown output %s\n", output->name, relative_name); output->initial_x = 0; output->initial_y = 0; any_set = TRUE; continue; } if (!modes[or]) { xf86DrvMsg (scrn->scrnIndex, X_ERROR, "Cannot position output %s relative to output %s without modes\n", output->name, relative_name); output->initial_x = 0; output->initial_y = 0; any_set = TRUE; continue; } if (relative->initial_x == POSITION_UNSET) { keep_going = TRUE; continue; } output->initial_x = relative->initial_x; output->initial_y = relative->initial_y; switch (relation) { case OPTION_BELOW: output->initial_y += xf86ModeHeight (modes[or], relative->initial_rotation); break; case OPTION_RIGHT_OF: output->initial_x += xf86ModeWidth (modes[or], relative->initial_rotation); break; case OPTION_ABOVE: if (modes[o]) output->initial_y -= xf86ModeHeight (modes[o], output->initial_rotation); break; case OPTION_LEFT_OF: if (modes[o]) output->initial_x -= xf86ModeWidth (modes[o], output->initial_rotation); break; default: break; } any_set = TRUE; continue; } /* Nothing set, just stick them at 0,0 */ output->initial_x = 0; output->initial_y = 0; any_set = TRUE; } if (!keep_going) break; if (!any_set) { for (o = 0; o < config->num_output; o++) { xf86OutputPtr output = config->output[o]; if (output->initial_x == POSITION_UNSET) { xf86DrvMsg (scrn->scrnIndex, X_ERROR, "Output position loop. Moving %s to 0,0\n", output->name); output->initial_x = output->initial_y = 0; break; } } } } /* * normalize positions */ min_x = 1000000; min_y = 1000000; for (o = 0; o < config->num_output; o++) { xf86OutputPtr output = config->output[o]; if (output->initial_x < min_x) min_x = output->initial_x; if (output->initial_y < min_y) min_y = output->initial_y; } for (o = 0; o < config->num_output; o++) { xf86OutputPtr output = config->output[o]; output->initial_x -= min_x; output->initial_y -= min_y; } return TRUE; } static void xf86InitialPanning (ScrnInfoPtr scrn) { xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); int o; for (o = 0; o < config->num_output; o++) { xf86OutputPtr output = config->output[o]; char *panning = xf86GetOptValString (output->options, OPTION_PANNING); int width, height, left, top; int track_width, track_height, track_left, track_top; int brdr[4]; memset (&output->initialTotalArea, 0, sizeof(BoxRec)); memset (&output->initialTrackingArea, 0, sizeof(BoxRec)); memset (output->initialBorder, 0, 4*sizeof(INT16)); if (! panning) continue; switch (sscanf (panning, "%dx%d+%d+%d/%dx%d+%d+%d/%d/%d/%d/%d", &width, &height, &left, &top, &track_width, &track_height, &track_left, &track_top, &brdr[0], &brdr[1], &brdr[2], &brdr[3])) { case 12: output->initialBorder[0] = brdr[0]; output->initialBorder[1] = brdr[1]; output->initialBorder[2] = brdr[2]; output->initialBorder[3] = brdr[3]; /* fall through */ case 8: output->initialTrackingArea.x1 = track_left; output->initialTrackingArea.y1 = track_top; output->initialTrackingArea.x2 = track_left + track_width; output->initialTrackingArea.y2 = track_top + track_height; /* fall through */ case 4: output->initialTotalArea.x1 = left; output->initialTotalArea.y1 = top; /* fall through */ case 2: output->initialTotalArea.x2 = output->initialTotalArea.x1 + width; output->initialTotalArea.y2 = output->initialTotalArea.y1 + height; break; default: xf86DrvMsg (scrn->scrnIndex, X_ERROR, "Broken panning specification '%s' for output %s in config file\n", panning, output->name); } } } /** Return - 0 + if a should be earlier, same or later than b in list */ static int xf86ModeCompare (DisplayModePtr a, DisplayModePtr b) { int diff; diff = ((b->type & M_T_PREFERRED) != 0) - ((a->type & M_T_PREFERRED) != 0); if (diff) return diff; diff = b->HDisplay * b->VDisplay - a->HDisplay * a->VDisplay; if (diff) return diff; diff = b->Clock - a->Clock; return diff; } /** * Insertion sort input in-place and return the resulting head */ static DisplayModePtr xf86SortModes (DisplayModePtr input) { DisplayModePtr output = NULL, i, o, n, *op, prev; /* sort by preferred status and pixel area */ while (input) { i = input; input = input->next; for (op = &output; (o = *op); op = &o->next) if (xf86ModeCompare (o, i) > 0) break; i->next = *op; *op = i; } /* prune identical modes */ for (o = output; o && (n = o->next); o = n) { if (!strcmp (o->name, n->name) && xf86ModesEqual (o, n)) { o->next = n->next; free(n->name); free(n); n = o; } } /* hook up backward links */ prev = NULL; for (o = output; o; o = o->next) { o->prev = prev; prev = o; } return output; } static char * preferredMode(ScrnInfoPtr pScrn, xf86OutputPtr output) { char *preferred_mode = NULL; /* Check for a configured preference for a particular mode */ preferred_mode = xf86GetOptValString (output->options, OPTION_PREFERRED_MODE); if (preferred_mode) return preferred_mode; if (pScrn->display->modes && *pScrn->display->modes) preferred_mode = *pScrn->display->modes; return preferred_mode; } static void GuessRangeFromModes(MonPtr mon, DisplayModePtr mode) { if (!mon || !mode) return; mon->nHsync = 1; mon->hsync[0].lo = 1024.0; mon->hsync[0].hi = 0.0; mon->nVrefresh = 1; mon->vrefresh[0].lo = 1024.0; mon->vrefresh[0].hi = 0.0; while (mode) { if (!mode->HSync) mode->HSync = ((float) mode->Clock ) / ((float) mode->HTotal); if (!mode->VRefresh) mode->VRefresh = (1000.0 * ((float) mode->Clock)) / ((float) (mode->HTotal * mode->VTotal)); if (mode->HSync < mon->hsync[0].lo) mon->hsync[0].lo = mode->HSync; if (mode->HSync > mon->hsync[0].hi) mon->hsync[0].hi = mode->HSync; if (mode->VRefresh < mon->vrefresh[0].lo) mon->vrefresh[0].lo = mode->VRefresh; if (mode->VRefresh > mon->vrefresh[0].hi) mon->vrefresh[0].hi = mode->VRefresh; mode = mode->next; } /* stretch out the bottom to fit 640x480@60 */ if (mon->hsync[0].lo > 31.0) mon->hsync[0].lo = 31.0; if (mon->vrefresh[0].lo > 58.0) mon->vrefresh[0].lo = 58.0; } enum det_monrec_source { sync_config, sync_edid, sync_default }; struct det_monrec_parameter { MonRec *mon_rec; int *max_clock; Bool set_hsync; Bool set_vrefresh; enum det_monrec_source *sync_source; }; static void handle_detailed_monrec(struct detailed_monitor_section *det_mon, void *data) { enum { sync_config, sync_edid, sync_default }; struct det_monrec_parameter *p; p = (struct det_monrec_parameter *)data; if (det_mon->type == DS_RANGES) { struct monitor_ranges *ranges = &det_mon->section.ranges; if (p->set_hsync && ranges->max_h) { p->mon_rec->hsync[p->mon_rec->nHsync].lo = ranges->min_h; p->mon_rec->hsync[p->mon_rec->nHsync].hi = ranges->max_h; p->mon_rec->nHsync++; if (*p->sync_source == sync_default) *p->sync_source = sync_edid; } if (p->set_vrefresh && ranges->max_v) { p->mon_rec->vrefresh[p->mon_rec->nVrefresh].lo = ranges->min_v; p->mon_rec->vrefresh[p->mon_rec->nVrefresh].hi = ranges->max_v; p->mon_rec->nVrefresh++; if (*p->sync_source == sync_default) *p->sync_source = sync_edid; } if (ranges->max_clock * 1000 > *p->max_clock) *p->max_clock = ranges->max_clock * 1000; } } void xf86ProbeOutputModes (ScrnInfoPtr scrn, int maxX, int maxY) { xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); int o; /* When canGrow was TRUE in the initial configuration we have to * compare against the maximum values so that we don't drop modes. * When canGrow was FALSE, the maximum values would have been clamped * anyway. */ if (maxX == 0 || maxY == 0) { maxX = config->maxWidth; maxY = config->maxHeight; } /* Probe the list of modes for each output. */ for (o = 0; o < config->num_output; o++) { xf86OutputPtr output = config->output[o]; DisplayModePtr mode; DisplayModePtr config_modes = NULL, output_modes, default_modes = NULL; char *preferred_mode; xf86MonPtr edid_monitor; XF86ConfMonitorPtr conf_monitor; MonRec mon_rec; int min_clock = 0; int max_clock = 0; double clock; Bool add_default_modes = xf86ReturnOptValBool(output->options, OPTION_DEFAULT_MODES, TRUE); Bool debug_modes = config->debug_modes || xf86Initialising; enum det_monrec_source sync_source = sync_default; while (output->probed_modes != NULL) xf86DeleteMode(&output->probed_modes, output->probed_modes); /* * Check connection status */ output->status = (*output->funcs->detect)(output); if (output->status == XF86OutputStatusDisconnected && !xf86ReturnOptValBool(output->options, OPTION_ENABLE, FALSE)) { xf86OutputSetEDID (output, NULL); continue; } memset (&mon_rec, '\0', sizeof (mon_rec)); conf_monitor = output->conf_monitor; if (conf_monitor) { int i; for (i = 0; i < conf_monitor->mon_n_hsync; i++) { mon_rec.hsync[mon_rec.nHsync].lo = conf_monitor->mon_hsync[i].lo; mon_rec.hsync[mon_rec.nHsync].hi = conf_monitor->mon_hsync[i].hi; mon_rec.nHsync++; sync_source = sync_config; } for (i = 0; i < conf_monitor->mon_n_vrefresh; i++) { mon_rec.vrefresh[mon_rec.nVrefresh].lo = conf_monitor->mon_vrefresh[i].lo; mon_rec.vrefresh[mon_rec.nVrefresh].hi = conf_monitor->mon_vrefresh[i].hi; mon_rec.nVrefresh++; sync_source = sync_config; } config_modes = xf86GetMonitorModes (scrn, conf_monitor); } output_modes = (*output->funcs->get_modes) (output); edid_monitor = output->MonInfo; if (edid_monitor) { struct det_monrec_parameter p; struct disp_features *features = &edid_monitor->features; /* if display is not continuous-frequency, don't add default modes */ if (!GTF_SUPPORTED(features->msc)) add_default_modes = FALSE; p.mon_rec = &mon_rec; p.max_clock = &max_clock; p.set_hsync = mon_rec.nHsync == 0; p.set_vrefresh = mon_rec.nVrefresh == 0; p.sync_source = &sync_source; xf86ForEachDetailedBlock(edid_monitor, handle_detailed_monrec, &p); } if (xf86GetOptValFreq (output->options, OPTION_MIN_CLOCK, OPTUNITS_KHZ, &clock)) min_clock = (int) clock; if (xf86GetOptValFreq (output->options, OPTION_MAX_CLOCK, OPTUNITS_KHZ, &clock)) max_clock = (int) clock; /* If we still don't have a sync range, guess wildly */ if (!mon_rec.nHsync || !mon_rec.nVrefresh) GuessRangeFromModes(&mon_rec, output_modes); /* * These limits will end up setting a 1024x768@60Hz mode by default, * which seems like a fairly good mode to use when nothing else is * specified */ if (mon_rec.nHsync == 0) { mon_rec.hsync[0].lo = 31.0; mon_rec.hsync[0].hi = 55.0; mon_rec.nHsync = 1; } if (mon_rec.nVrefresh == 0) { mon_rec.vrefresh[0].lo = 58.0; mon_rec.vrefresh[0].hi = 62.0; mon_rec.nVrefresh = 1; } if (add_default_modes) default_modes = xf86GetDefaultModes (); /* * If this is not an RB monitor, remove RB modes from the default * pool. RB modes from the config or the monitor itself are fine. */ if (!mon_rec.reducedblanking) xf86ValidateModesReducedBlanking (scrn, default_modes); if (sync_source == sync_config) { /* * Check output and config modes against sync range from config file */ xf86ValidateModesSync (scrn, output_modes, &mon_rec); xf86ValidateModesSync (scrn, config_modes, &mon_rec); } /* * Check default modes against sync range */ xf86ValidateModesSync (scrn, default_modes, &mon_rec); /* * Check default modes against monitor max clock */ if (max_clock) { xf86ValidateModesClocks(scrn, default_modes, &min_clock, &max_clock, 1); xf86ValidateModesClocks(scrn, output_modes, &min_clock, &max_clock, 1); } output->probed_modes = NULL; output->probed_modes = xf86ModesAdd (output->probed_modes, config_modes); output->probed_modes = xf86ModesAdd (output->probed_modes, output_modes); output->probed_modes = xf86ModesAdd (output->probed_modes, default_modes); /* * Check all modes against max size, interlace, and doublescan */ if (maxX && maxY) xf86ValidateModesSize (scrn, output->probed_modes, maxX, maxY, 0); { int flags = (output->interlaceAllowed ? V_INTERLACE : 0) | (output->doubleScanAllowed ? V_DBLSCAN : 0); xf86ValidateModesFlags (scrn, output->probed_modes, flags); } /* * Check all modes against output */ for (mode = output->probed_modes; mode != NULL; mode = mode->next) if (mode->status == MODE_OK) mode->status = (*output->funcs->mode_valid)(output, mode); xf86PruneInvalidModes(scrn, &output->probed_modes, debug_modes); output->probed_modes = xf86SortModes (output->probed_modes); /* Check for a configured preference for a particular mode */ preferred_mode = preferredMode(scrn, output); if (preferred_mode) { for (mode = output->probed_modes; mode; mode = mode->next) { if (!strcmp (preferred_mode, mode->name)) { if (mode != output->probed_modes) { if (mode->prev) mode->prev->next = mode->next; if (mode->next) mode->next->prev = mode->prev; mode->next = output->probed_modes; output->probed_modes->prev = mode; mode->prev = NULL; output->probed_modes = mode; } mode->type |= (M_T_PREFERRED|M_T_USERPREF); break; } } } output->initial_rotation = xf86OutputInitialRotation (output); if (debug_modes) { if (output->probed_modes != NULL) { xf86DrvMsg(scrn->scrnIndex, X_INFO, "Printing probed modes for output %s\n", output->name); } else { xf86DrvMsg(scrn->scrnIndex, X_INFO, "No remaining probed modes for output %s\n", output->name); } } for (mode = output->probed_modes; mode != NULL; mode = mode->next) { /* The code to choose the best mode per pipe later on will require * VRefresh to be set. */ mode->VRefresh = xf86ModeVRefresh(mode); xf86SetModeCrtc(mode, INTERLACE_HALVE_V); if (debug_modes) xf86PrintModeline(scrn->scrnIndex, mode); } } } /** * Copy one of the output mode lists to the ScrnInfo record */ /* XXX where does this function belong? Here? */ void xf86RandR12GetOriginalVirtualSize(ScrnInfoPtr scrn, int *x, int *y); static DisplayModePtr biggestMode(DisplayModePtr a, DisplayModePtr b) { int A, B; if (!a) return b; if (!b) return a; A = a->HDisplay * a->VDisplay; B = b->HDisplay * b->VDisplay; if (A > B) return a; return b; } static xf86OutputPtr SetCompatOutput(xf86CrtcConfigPtr config) { xf86OutputPtr output = NULL, test = NULL; DisplayModePtr maxmode = NULL, testmode, mode; int o, compat = -1, count, mincount = 0; /* Look for one that's definitely connected */ for (o = 0; o < config->num_output; o++) { test = config->output[o]; if (!test->crtc) continue; if (test->status != XF86OutputStatusConnected) continue; if (!test->probed_modes) continue; testmode = mode = test->probed_modes; for (count = 0; mode; mode = mode->next, count++) testmode = biggestMode(testmode, mode); if (!output) { output = test; compat = o; maxmode = testmode; mincount = count; } else if (maxmode == biggestMode(maxmode, testmode)) { output = test; compat = o; maxmode = testmode; mincount = count; } else if ((maxmode->HDisplay == testmode->HDisplay) && (maxmode->VDisplay == testmode->VDisplay) && count <= mincount) { output = test; compat = o; maxmode = testmode; mincount = count; } } /* If we didn't find one, take anything we can get */ if (!output) { for (o = 0; o < config->num_output; o++) { test = config->output[o]; if (!test->crtc) continue; if (!test->probed_modes) continue; if (!output) { output = test; compat = o; } else if (test->probed_modes->HDisplay < output->probed_modes->HDisplay) { output = test; compat = o; } } } if (compat >= 0) { config->compat_output = compat; } else { /* Don't change the compat output when no valid outputs found */ output = config->output[config->compat_output]; } return output; } void xf86SetScrnInfoModes (ScrnInfoPtr scrn) { xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); xf86OutputPtr output; xf86CrtcPtr crtc; DisplayModePtr last, mode = NULL; output = SetCompatOutput(config); if (!output) return; /* punt */ crtc = output->crtc; /* Clear any existing modes from scrn->modes */ while (scrn->modes != NULL) xf86DeleteMode(&scrn->modes, scrn->modes); /* Set scrn->modes to the mode list for the 'compat' output */ scrn->modes = xf86DuplicateModes(scrn, output->probed_modes); if (crtc) { for (mode = scrn->modes; mode; mode = mode->next) if (xf86ModesEqual (mode, &crtc->desiredMode)) break; } if (scrn->modes != NULL) { /* For some reason, scrn->modes is circular, unlike the other mode * lists. How great is that? */ for (last = scrn->modes; last && last->next; last = last->next) ; last->next = scrn->modes; scrn->modes->prev = last; if (mode) { while (scrn->modes != mode) scrn->modes = scrn->modes->next; } } scrn->currentMode = scrn->modes; #ifdef XFreeXDGA if (scrn->pScreen) _xf86_di_dga_reinit_internal(scrn->pScreen); #endif } static Bool xf86CollectEnabledOutputs(ScrnInfoPtr scrn, xf86CrtcConfigPtr config, Bool *enabled) { Bool any_enabled = FALSE; int o; for (o = 0; o < config->num_output; o++) any_enabled |= enabled[o] = xf86OutputEnabled(config->output[o], TRUE); if (!any_enabled) { xf86DrvMsg(scrn->scrnIndex, X_WARNING, "No outputs definitely connected, trying again...\n"); for (o = 0; o < config->num_output; o++) any_enabled |= enabled[o] = xf86OutputEnabled(config->output[o], FALSE); } return any_enabled; } static Bool nextEnabledOutput(xf86CrtcConfigPtr config, Bool *enabled, int *index) { int o = *index; for (o++; o < config->num_output; o++) { if (enabled[o]) { *index = o; return TRUE; } } return FALSE; } static Bool aspectMatch(float a, float b) { return fabs(1 - (a / b)) < 0.05; } static DisplayModePtr nextAspectMode(xf86OutputPtr o, DisplayModePtr last, float aspect) { DisplayModePtr m = NULL; if (!o) return NULL; if (!last) m = o->probed_modes; else m = last->next; for (; m; m = m->next) if (aspectMatch(aspect, (float)m->HDisplay / (float)m->VDisplay)) return m; return NULL; } static DisplayModePtr bestModeForAspect(xf86CrtcConfigPtr config, Bool *enabled, float aspect) { int o = -1, p; DisplayModePtr mode = NULL, test = NULL, match = NULL; if (!nextEnabledOutput(config, enabled, &o)) return NULL; while ((mode = nextAspectMode(config->output[o], mode, aspect))) { test = mode; for (p = o; nextEnabledOutput(config, enabled, &p); ) { test = xf86OutputFindClosestMode(config->output[p], mode); if (!test) break; if (test->HDisplay != mode->HDisplay || test->VDisplay != mode->VDisplay) { test = NULL; break; } } /* if we didn't match it on all outputs, try the next one */ if (!test) continue; /* if it's bigger than the last one, save it */ if (!match || (test->HDisplay > match->HDisplay)) match = test; } /* return the biggest one found */ return match; } static Bool xf86TargetPreferred(ScrnInfoPtr scrn, xf86CrtcConfigPtr config, DisplayModePtr *modes, Bool *enabled, int width, int height) { int o, p; int max_pref_width = 0, max_pref_height = 0; DisplayModePtr *preferred, *preferred_match; Bool ret = FALSE; preferred = xnfcalloc(config->num_output, sizeof(DisplayModePtr)); preferred_match = xnfcalloc(config->num_output, sizeof(DisplayModePtr)); /* Check if the preferred mode is available on all outputs */ for (p = -1; nextEnabledOutput(config, enabled, &p); ) { Rotation r = config->output[p]->initial_rotation; DisplayModePtr mode; if ((preferred[p] = xf86OutputHasPreferredMode(config->output[p], width, height))) { int pref_width = xf86ModeWidth(preferred[p], r); int pref_height = xf86ModeHeight(preferred[p], r); Bool all_match = TRUE; for (o = -1; nextEnabledOutput(config, enabled, &o); ) { Bool match = FALSE; xf86OutputPtr output = config->output[o]; if (o == p) continue; for (mode = output->probed_modes; mode; mode = mode->next) { Rotation r = output->initial_rotation; if (xf86ModeWidth(mode, r) == pref_width && xf86ModeHeight(mode, r) == pref_height) { preferred[o] = mode; match = TRUE; } } all_match &= match; } if (all_match && (pref_width*pref_height > max_pref_width*max_pref_height)) { for (o = -1; nextEnabledOutput(config, enabled, &o); ) preferred_match[o] = preferred[o]; max_pref_width = pref_width; max_pref_height = pref_height; ret = TRUE; } } } /* * If there's no preferred mode, but only one monitor, pick the * biggest mode for its aspect ratio, assuming one exists. */ if (!ret) do { int i = 0; float aspect = 0.0; /* count the number of enabled outputs */ for (i = 0, p = -1; nextEnabledOutput(config, enabled, &p); i++) ; if (i != 1) break; p = -1; nextEnabledOutput(config, enabled, &p); if (config->output[p]->mm_height) aspect = (float)config->output[p]->mm_width / (float)config->output[p]->mm_height; if (aspect) preferred_match[p] = bestModeForAspect(config, enabled, aspect); if (preferred_match[p]) ret = TRUE; } while (0); if (ret) { /* oh good, there is a match. stash the selected modes and return. */ memcpy(modes, preferred_match, config->num_output * sizeof(DisplayModePtr)); } free(preferred); free(preferred_match); return ret; } static Bool xf86TargetAspect(ScrnInfoPtr scrn, xf86CrtcConfigPtr config, DisplayModePtr *modes, Bool *enabled, int width, int height) { int o; float aspect = 0.0, *aspects; xf86OutputPtr output; Bool ret = FALSE; DisplayModePtr guess = NULL, aspect_guess = NULL, base_guess = NULL; aspects = xnfcalloc(config->num_output, sizeof(float)); /* collect the aspect ratios */ for (o = -1; nextEnabledOutput(config, enabled, &o); ) { output = config->output[o]; if (output->mm_height) aspects[o] = (float)output->mm_width / (float)output->mm_height; else aspects[o] = 4.0 / 3.0; } /* check that they're all the same */ for (o = -1; nextEnabledOutput(config, enabled, &o); ) { output = config->output[o]; if (!aspect) { aspect = aspects[o]; } else if (!aspectMatch(aspect, aspects[o])) { goto no_aspect_match; } } /* if they're all 4:3, just skip ahead and save effort */ if (!aspectMatch(aspect, 4.0/3.0)) aspect_guess = bestModeForAspect(config, enabled, aspect); no_aspect_match: base_guess = bestModeForAspect(config, enabled, 4.0/3.0); guess = biggestMode(base_guess, aspect_guess); if (!guess) goto out; /* found a mode that works everywhere, now apply it */ for (o = -1; nextEnabledOutput(config, enabled, &o); ) { modes[o] = xf86OutputFindClosestMode(config->output[o], guess); } ret = TRUE; out: free(aspects); return ret; } static Bool xf86TargetFallback(ScrnInfoPtr scrn, xf86CrtcConfigPtr config, DisplayModePtr *modes, Bool *enabled, int width, int height) { DisplayModePtr target_mode = NULL; Rotation target_rotation = RR_Rotate_0; DisplayModePtr default_mode; int default_preferred, target_preferred = 0, o; /* User preferred > preferred > other modes */ for (o = -1; nextEnabledOutput(config, enabled, &o); ) { default_mode = xf86DefaultMode (config->output[o], width, height); if (!default_mode) continue; default_preferred = (((default_mode->type & M_T_PREFERRED) != 0) + ((default_mode->type & M_T_USERPREF) != 0)); if (default_preferred > target_preferred || !target_mode) { target_mode = default_mode; target_preferred = default_preferred; target_rotation = config->output[o]->initial_rotation; config->compat_output = o; } } if (target_mode) modes[config->compat_output] = target_mode; /* Fill in other output modes */ for (o = -1; nextEnabledOutput(config, enabled, &o); ) { if (!modes[o]) modes[o] = xf86ClosestMode(config->output[o], target_mode, target_rotation, width, height); } return (target_mode != NULL); } static Bool xf86TargetUserpref(ScrnInfoPtr scrn, xf86CrtcConfigPtr config, DisplayModePtr *modes, Bool *enabled, int width, int height) { int o; if (xf86UserConfiguredOutputs(scrn, modes)) return xf86TargetFallback(scrn, config, modes, enabled, width, height); for (o = -1; nextEnabledOutput(config, enabled, &o); ) if (xf86OutputHasUserPreferredMode(config->output[o])) return xf86TargetFallback(scrn, config, modes, enabled, width, height); return FALSE; } static Bool xf86CrtcSetInitialGamma(xf86CrtcPtr crtc, float gamma_red, float gamma_green, float gamma_blue) { int i, size = 256; CARD16 *red, *green, *blue; red = malloc(3 * size * sizeof(CARD16)); green = red + size; blue = green + size; /* Only cause warning if user wanted gamma to be set. */ if (!crtc->funcs->gamma_set && (gamma_red != 1.0 || gamma_green != 1.0 || gamma_blue != 1.0)) { free(red); return FALSE; } else if (!crtc->funcs->gamma_set) { free(red); return TRUE; } /* At this early stage none of the randr-interface stuff is up. * So take the default gamma size for lack of something better. */ for (i = 0; i < size; i++) { if (gamma_red == 1.0) red[i] = i << 8; else red[i] = (CARD16)(pow((double)i/(double)(size - 1), 1. / (double)gamma_red) * (double)(size - 1) * 256); if (gamma_green == 1.0) green[i] = i << 8; else green[i] = (CARD16)(pow((double)i/(double)(size - 1), 1. / (double)gamma_green) * (double)(size - 1) * 256); if (gamma_blue == 1.0) blue[i] = i << 8; else blue[i] = (CARD16)(pow((double)i/(double)(size - 1), 1. / (double)gamma_blue) * (double)(size - 1) * 256); } /* Default size is 256, so anything else is failure. */ if (size != crtc->gamma_size) { free(red); return FALSE; } crtc->gamma_size = size; memcpy (crtc->gamma_red, red, crtc->gamma_size * sizeof (CARD16)); memcpy (crtc->gamma_green, green, crtc->gamma_size * sizeof (CARD16)); memcpy (crtc->gamma_blue, blue, crtc->gamma_size * sizeof (CARD16)); /* Do not set gamma now, delay until the crtc is activated. */ free(red); return TRUE; } static Bool xf86OutputSetInitialGamma(xf86OutputPtr output) { XF86ConfMonitorPtr mon = output->conf_monitor; float gamma_red = 1.0, gamma_green = 1.0, gamma_blue = 1.0; if (!mon) return TRUE; if (!output->crtc) return FALSE; /* Get configured values, where they exist. */ if (mon->mon_gamma_red >= GAMMA_MIN && mon->mon_gamma_red <= GAMMA_MAX) gamma_red = mon->mon_gamma_red; if (mon->mon_gamma_green >= GAMMA_MIN && mon->mon_gamma_green <= GAMMA_MAX) gamma_green = mon->mon_gamma_green; if (mon->mon_gamma_blue >= GAMMA_MIN && mon->mon_gamma_blue <= GAMMA_MAX) gamma_blue = mon->mon_gamma_blue; /* This avoids setting gamma 1.0 in case another cloned output on this crtc has a specific gamma. */ if (gamma_red != 1.0 || gamma_green != 1.0 || gamma_blue != 1.0) { xf86DrvMsg(output->scrn->scrnIndex, X_INFO, "Output %s wants gamma correction (%.1f, %.1f, %.1f)\n", output->name, gamma_red, gamma_green, gamma_blue); return xf86CrtcSetInitialGamma(output->crtc, gamma_red, gamma_green, gamma_blue); }else return TRUE; } /** * Construct default screen configuration * * Given auto-detected (and, eventually, configured) values, * construct a usable configuration for the system * * canGrow indicates that the driver can resize the screen to larger than its * initially configured size via the config->funcs->resize hook. If TRUE, this * function will set virtualX and virtualY to match the initial configuration * and leave config->max{Width,Height} alone. If FALSE, it will bloat * virtual[XY] to include the largest modes and set config->max{Width,Height} * accordingly. */ Bool xf86InitialConfiguration (ScrnInfoPtr scrn, Bool canGrow) { xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); int o, c; xf86CrtcPtr *crtcs; DisplayModePtr *modes; Bool *enabled; int width, height; int i = scrn->scrnIndex; Bool have_outputs = TRUE; Bool ret; /* Set up the device options */ config->options = xnfalloc (sizeof (xf86DeviceOptions)); memcpy (config->options, xf86DeviceOptions, sizeof (xf86DeviceOptions)); xf86ProcessOptions (scrn->scrnIndex, scrn->options, config->options); config->debug_modes = xf86ReturnOptValBool (config->options, OPTION_MODEDEBUG, FALSE); if (scrn->display->virtualX) width = scrn->display->virtualX; else width = config->maxWidth; if (scrn->display->virtualY) height = scrn->display->virtualY; else height = config->maxHeight; xf86ProbeOutputModes (scrn, width, height); crtcs = xnfcalloc (config->num_output, sizeof (xf86CrtcPtr)); modes = xnfcalloc (config->num_output, sizeof (DisplayModePtr)); enabled = xnfcalloc (config->num_output, sizeof (Bool)); ret = xf86CollectEnabledOutputs(scrn, config, enabled); if (ret == FALSE && canGrow) { xf86DrvMsg(i, X_WARNING, "Unable to find connected outputs - setting %dx%d initial framebuffer\n", NO_OUTPUT_DEFAULT_WIDTH, NO_OUTPUT_DEFAULT_HEIGHT); have_outputs = FALSE; } else { if (xf86TargetUserpref(scrn, config, modes, enabled, width, height)) xf86DrvMsg(i, X_INFO, "Using user preference for initial modes\n"); else if (xf86TargetPreferred(scrn, config, modes, enabled, width, height)) xf86DrvMsg(i, X_INFO, "Using exact sizes for initial modes\n"); else if (xf86TargetAspect(scrn, config, modes, enabled, width, height)) xf86DrvMsg(i, X_INFO, "Using fuzzy aspect match for initial modes\n"); else if (xf86TargetFallback(scrn, config, modes, enabled, width, height)) xf86DrvMsg(i, X_INFO, "Using sloppy heuristic for initial modes\n"); else xf86DrvMsg(i, X_WARNING, "Unable to find initial modes\n"); } for (o = -1; nextEnabledOutput(config, enabled, &o); ) { if (!modes[o]) xf86DrvMsg (scrn->scrnIndex, X_ERROR, "Output %s enabled but has no modes\n", config->output[o]->name); else xf86DrvMsg (scrn->scrnIndex, X_INFO, "Output %s using initial mode %s\n", config->output[o]->name, modes[o]->name); } /* * Set the position of each output */ if (!xf86InitialOutputPositions (scrn, modes)) { free(crtcs); free(modes); return FALSE; } /* * Set initial panning of each output */ xf86InitialPanning (scrn); /* * Assign CRTCs to fit output configuration */ if (have_outputs && !xf86PickCrtcs (scrn, crtcs, modes, 0, width, height)) { free(crtcs); free(modes); return FALSE; } /* XXX override xf86 common frame computation code */ scrn->display->frameX0 = 0; scrn->display->frameY0 = 0; for (c = 0; c < config->num_crtc; c++) { xf86CrtcPtr crtc = config->crtc[c]; crtc->enabled = FALSE; memset (&crtc->desiredMode, '\0', sizeof (crtc->desiredMode)); /* Set default gamma for all crtc's. */ /* This is done to avoid problems later on with cloned outputs. */ xf86CrtcSetInitialGamma(crtc, 1.0, 1.0, 1.0); } if (xf86_crtc_supports_gamma(scrn)) xf86DrvMsg(scrn->scrnIndex, X_INFO, "Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.\n"); /* * Set initial configuration */ for (o = 0; o < config->num_output; o++) { xf86OutputPtr output = config->output[o]; DisplayModePtr mode = modes[o]; xf86CrtcPtr crtc = crtcs[o]; if (mode && crtc) { crtc->desiredMode = *mode; crtc->desiredRotation = output->initial_rotation; crtc->desiredX = output->initial_x; crtc->desiredY = output->initial_y; crtc->desiredTransformPresent = FALSE; crtc->enabled = TRUE; memcpy (&crtc->panningTotalArea, &output->initialTotalArea, sizeof(BoxRec)); memcpy (&crtc->panningTrackingArea, &output->initialTrackingArea, sizeof(BoxRec)); memcpy (crtc->panningBorder, output->initialBorder, 4*sizeof(INT16)); output->crtc = crtc; if (!xf86OutputSetInitialGamma(output)) xf86DrvMsg (scrn->scrnIndex, X_WARNING, "Initial gamma correction for output %s: failed.\n", output->name); } else { output->crtc = NULL; } } if (scrn->display->virtualX == 0) { /* * Expand virtual size to cover the current config and potential mode * switches, if the driver can't enlarge the screen later. */ xf86DefaultScreenLimits (scrn, &width, &height, canGrow); if (have_outputs == FALSE) { if (width < NO_OUTPUT_DEFAULT_WIDTH && height < NO_OUTPUT_DEFAULT_HEIGHT) { width = NO_OUTPUT_DEFAULT_WIDTH; height = NO_OUTPUT_DEFAULT_HEIGHT; } } scrn->display->virtualX = width; scrn->display->virtualY = height; } if (width > scrn->virtualX) scrn->virtualX = width; if (height > scrn->virtualY) scrn->virtualY = height; /* * Make sure the configuration isn't too small. */ if (width < config->minWidth || height < config->minHeight) return FALSE; /* * Limit the crtc config to virtual[XY] if the driver can't grow the * desktop. */ if (!canGrow) { xf86CrtcSetSizeRange (scrn, config->minWidth, config->minHeight, width, height); } if (have_outputs) { /* Mirror output modes to scrn mode list */ xf86SetScrnInfoModes (scrn); } else { /* Clear any existing modes from scrn->modes */ while (scrn->modes != NULL) xf86DeleteMode(&scrn->modes, scrn->modes); scrn->modes = xf86ModesAdd(scrn->modes, xf86CVTMode(width, height, 60, 0, 0)); } free(crtcs); free(modes); return TRUE; } /* * Check the CRTC we're going to map each output to vs. it's current * CRTC. If they don't match, we have to disable the output and the CRTC * since the driver will have to re-route things. */ static void xf86PrepareOutputs (ScrnInfoPtr scrn) { xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); int o; for (o = 0; o < config->num_output; o++) { xf86OutputPtr output = config->output[o]; #if RANDR_GET_CRTC_INTERFACE /* Disable outputs that are unused or will be re-routed */ if (!output->funcs->get_crtc || output->crtc != (*output->funcs->get_crtc)(output) || output->crtc == NULL) #endif (*output->funcs->dpms)(output, DPMSModeOff); } } static void xf86PrepareCrtcs (ScrnInfoPtr scrn) { xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); int c; for (c = 0; c < config->num_crtc; c++) { #if RANDR_GET_CRTC_INTERFACE xf86CrtcPtr crtc = config->crtc[c]; xf86OutputPtr output = NULL; uint32_t desired_outputs = 0, current_outputs = 0; int o; for (o = 0; o < config->num_output; o++) { output = config->output[o]; if (output->crtc == crtc) desired_outputs |= (1<funcs->get_crtc) { desired_outputs = 0; break; } if ((*output->funcs->get_crtc)(output) == crtc) current_outputs |= (1<funcs->dpms)(crtc, DPMSModeOff); #else (*crtc->funcs->dpms)(crtc, DPMSModeOff); #endif } } /* * Using the desired mode information in each crtc, set * modes (used in EnterVT functions, or at server startup) */ Bool xf86SetDesiredModes (ScrnInfoPtr scrn) { xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); xf86CrtcPtr crtc = config->crtc[0]; int c; /* A driver with this hook will take care of this */ if (!crtc->funcs->set_mode_major) { xf86PrepareOutputs(scrn); xf86PrepareCrtcs(scrn); } for (c = 0; c < config->num_crtc; c++) { xf86OutputPtr output = NULL; int o; RRTransformPtr transform; crtc = config->crtc[c]; /* Skip disabled CRTCs */ if (!crtc->enabled) continue; if (xf86CompatOutput(scrn) && xf86CompatCrtc(scrn) == crtc) output = xf86CompatOutput(scrn); else { for (o = 0; o < config->num_output; o++) if (config->output[o]->crtc == crtc) { output = config->output[o]; break; } } /* paranoia */ if (!output) continue; /* Mark that we'll need to re-set the mode for sure */ memset(&crtc->mode, 0, sizeof(crtc->mode)); if (!crtc->desiredMode.CrtcHDisplay) { DisplayModePtr mode = xf86OutputFindClosestMode (output, scrn->currentMode); if (!mode) return FALSE; crtc->desiredMode = *mode; crtc->desiredRotation = RR_Rotate_0; crtc->desiredTransformPresent = FALSE; crtc->desiredX = 0; crtc->desiredY = 0; } if (crtc->desiredTransformPresent) transform = &crtc->desiredTransform; else transform = NULL; if (!xf86CrtcSetModeTransform (crtc, &crtc->desiredMode, crtc->desiredRotation, transform, crtc->desiredX, crtc->desiredY)) return FALSE; } xf86DisableUnusedFunctions(scrn); return TRUE; } /** * In the current world order, there are lists of modes per output, which may * or may not include the mode that was asked to be set by XFree86's mode * selection. Find the closest one, in the following preference order: * * - Equality * - Closer in size to the requested mode, but no larger * - Closer in refresh rate to the requested mode. */ DisplayModePtr xf86OutputFindClosestMode (xf86OutputPtr output, DisplayModePtr desired) { DisplayModePtr best = NULL, scan = NULL; for (scan = output->probed_modes; scan != NULL; scan = scan->next) { /* If there's an exact match, we're done. */ if (xf86ModesEqual(scan, desired)) { best = desired; break; } /* Reject if it's larger than the desired mode. */ if (scan->HDisplay > desired->HDisplay || scan->VDisplay > desired->VDisplay) { continue; } /* * If we haven't picked a best mode yet, use the first * one in the size range */ if (best == NULL) { best = scan; continue; } /* Find if it's closer to the right size than the current best * option. */ if ((scan->HDisplay > best->HDisplay && scan->VDisplay >= best->VDisplay) || (scan->HDisplay >= best->HDisplay && scan->VDisplay > best->VDisplay)) { best = scan; continue; } /* Find if it's still closer to the right refresh than the current * best resolution. */ if (scan->HDisplay == best->HDisplay && scan->VDisplay == best->VDisplay && (fabs(scan->VRefresh - desired->VRefresh) < fabs(best->VRefresh - desired->VRefresh))) { best = scan; } } return best; } /** * When setting a mode through XFree86-VidModeExtension or XFree86-DGA, * take the specified mode and apply it to the crtc connected to the compat * output. Then, find similar modes for the other outputs, as with the * InitialConfiguration code above. The goal is to clone the desired * mode across all outputs that are currently active. */ Bool xf86SetSingleMode (ScrnInfoPtr pScrn, DisplayModePtr desired, Rotation rotation) { xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(pScrn); Bool ok = TRUE; xf86OutputPtr compat_output; DisplayModePtr compat_mode = NULL; int c; /* * Let the compat output drive the final mode selection */ compat_output = xf86CompatOutput(pScrn); if (compat_output) compat_mode = xf86OutputFindClosestMode (compat_output, desired); if (compat_mode) desired = compat_mode; for (c = 0; c < config->num_crtc; c++) { xf86CrtcPtr crtc = config->crtc[c]; DisplayModePtr crtc_mode = NULL; int o; if (!crtc->enabled) continue; for (o = 0; o < config->num_output; o++) { xf86OutputPtr output = config->output[o]; DisplayModePtr output_mode; /* skip outputs not on this crtc */ if (output->crtc != crtc) continue; if (crtc_mode) { output_mode = xf86OutputFindClosestMode (output, crtc_mode); if (output_mode != crtc_mode) output->crtc = NULL; } else crtc_mode = xf86OutputFindClosestMode (output, desired); } if (!crtc_mode) { crtc->enabled = FALSE; continue; } if (!xf86CrtcSetModeTransform (crtc, crtc_mode, rotation, NULL, 0, 0)) ok = FALSE; else { crtc->desiredMode = *crtc_mode; crtc->desiredRotation = rotation; crtc->desiredTransformPresent = FALSE; crtc->desiredX = 0; crtc->desiredY = 0; } } xf86DisableUnusedFunctions(pScrn); #ifdef RANDR_12_INTERFACE xf86RandR12TellChanged (pScrn->pScreen); #endif return ok; } /** * Set the DPMS power mode of all outputs and CRTCs. * * If the new mode is off, it will turn off outputs and then CRTCs. * Otherwise, it will affect CRTCs before outputs. */ void xf86DPMSSet(ScrnInfoPtr scrn, int mode, int flags) { xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); int i; if (!scrn->vtSema) return; if (mode == DPMSModeOff) { for (i = 0; i < config->num_output; i++) { xf86OutputPtr output = config->output[i]; if (output->crtc != NULL) (*output->funcs->dpms) (output, mode); } } for (i = 0; i < config->num_crtc; i++) { xf86CrtcPtr crtc = config->crtc[i]; if (crtc->enabled) (*crtc->funcs->dpms) (crtc, mode); } if (mode != DPMSModeOff) { for (i = 0; i < config->num_output; i++) { xf86OutputPtr output = config->output[i]; if (output->crtc != NULL) (*output->funcs->dpms) (output, mode); } } } /** * Implement the screensaver by just calling down into the driver DPMS hooks. * * Even for monitors with no DPMS support, by the definition of our DPMS hooks, * the outputs will still get disabled (blanked). */ Bool xf86SaveScreen(ScreenPtr pScreen, int mode) { ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; if (xf86IsUnblank(mode)) xf86DPMSSet(pScrn, DPMSModeOn, 0); else xf86DPMSSet(pScrn, DPMSModeOff, 0); return TRUE; } /** * Disable all inactive crtcs and outputs */ void xf86DisableUnusedFunctions(ScrnInfoPtr pScrn) { xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn); int o, c; for (o = 0; o < xf86_config->num_output; o++) { xf86OutputPtr output = xf86_config->output[o]; if (!output->crtc) (*output->funcs->dpms)(output, DPMSModeOff); } for (c = 0; c < xf86_config->num_crtc; c++) { xf86CrtcPtr crtc = xf86_config->crtc[c]; if (!crtc->enabled) { crtc->funcs->dpms(crtc, DPMSModeOff); memset(&crtc->mode, 0, sizeof(crtc->mode)); xf86RotateDestroy(crtc); crtc->active = FALSE; } } if (pScrn->pScreen) xf86_crtc_notify(pScrn->pScreen); } #ifdef RANDR_12_INTERFACE #define EDID_ATOM_NAME "EDID" /** * Set the RandR EDID property */ static void xf86OutputSetEDIDProperty (xf86OutputPtr output, void *data, int data_len) { Atom edid_atom = MakeAtom(EDID_ATOM_NAME, sizeof(EDID_ATOM_NAME) - 1, TRUE); /* This may get called before the RandR resources have been created */ if (output->randr_output == NULL) return; if (data_len != 0) { RRChangeOutputProperty(output->randr_output, edid_atom, XA_INTEGER, 8, PropModeReplace, data_len, data, FALSE, TRUE); } else { RRDeleteOutputProperty(output->randr_output, edid_atom); } } #endif /* Pull out a phyiscal size from a detailed timing if available. */ struct det_phySize_parameter { xf86OutputPtr output; ddc_quirk_t quirks; Bool ret; }; static void handle_detailed_physical_size(struct detailed_monitor_section *det_mon, void *data) { struct det_phySize_parameter *p; p = (struct det_phySize_parameter *)data; if (p->ret == TRUE ) return ; xf86DetTimingApplyQuirks(det_mon, p->quirks, p->output->MonInfo->features.hsize, p->output->MonInfo->features.vsize); if (det_mon->type == DT && det_mon->section.d_timings.h_size != 0 && det_mon->section.d_timings.v_size != 0) { p->output->mm_width = det_mon->section.d_timings.h_size; p->output->mm_height = det_mon->section.d_timings.v_size; p->ret = TRUE; } } /** * Set the EDID information for the specified output */ void xf86OutputSetEDID (xf86OutputPtr output, xf86MonPtr edid_mon) { ScrnInfoPtr scrn = output->scrn; xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); Bool debug_modes = config->debug_modes || xf86Initialising; #ifdef RANDR_12_INTERFACE int size; #endif if (output->MonInfo != NULL) free(output->MonInfo); output->MonInfo = edid_mon; if (debug_modes) { xf86DrvMsg(scrn->scrnIndex, X_INFO, "EDID for output %s\n", output->name); xf86PrintEDID(edid_mon); } /* Set the DDC properties for the 'compat' output */ if (output == xf86CompatOutput(scrn)) xf86SetDDCproperties(scrn, edid_mon); #ifdef RANDR_12_INTERFACE /* Set the RandR output properties */ size = 0; if (edid_mon) { if (edid_mon->ver.version == 1) { size = 128; if (edid_mon->flags & EDID_COMPLETE_RAWDATA) size += edid_mon->no_sections * 128; } else if (edid_mon->ver.version == 2) size = 256; } xf86OutputSetEDIDProperty (output, edid_mon ? edid_mon->rawData : NULL, size); #endif if (edid_mon) { struct det_phySize_parameter p; p.output = output; p.quirks = xf86DDCDetectQuirks(scrn->scrnIndex,edid_mon, FALSE); p.ret = FALSE; xf86ForEachDetailedBlock(edid_mon, handle_detailed_physical_size, &p); /* if no mm size is available from a detailed timing, check the max size field */ if ((!output->mm_width || !output->mm_height) && (edid_mon->features.hsize && edid_mon->features.vsize)) { output->mm_width = edid_mon->features.hsize * 10; output->mm_height = edid_mon->features.vsize * 10; } } } /** * Return the list of modes supported by the EDID information * stored in 'output' */ DisplayModePtr xf86OutputGetEDIDModes (xf86OutputPtr output) { ScrnInfoPtr scrn = output->scrn; xf86MonPtr edid_mon = output->MonInfo; if (!edid_mon) return NULL; return xf86DDCGetModes(scrn->scrnIndex, edid_mon); } /* maybe we should care about DDC1? meh. */ xf86MonPtr xf86OutputGetEDID (xf86OutputPtr output, I2CBusPtr pDDCBus) { ScrnInfoPtr scrn = output->scrn; xf86MonPtr mon; mon = xf86DoEEDID(scrn->scrnIndex, pDDCBus, TRUE); if (mon) xf86DDCApplyQuirks(scrn->scrnIndex, mon); return mon; } static char *_xf86ConnectorNames[] = { "None", "VGA", "DVI-I", "DVI-D", "DVI-A", "Composite", "S-Video", "Component", "LFP", "Proprietary", "HDMI", "DisplayPort", }; char * xf86ConnectorGetName(xf86ConnectorType connector) { return _xf86ConnectorNames[connector]; } static void x86_crtc_box_intersect(BoxPtr dest, BoxPtr a, BoxPtr b) { dest->x1 = a->x1 > b->x1 ? a->x1 : b->x1; dest->x2 = a->x2 < b->x2 ? a->x2 : b->x2; dest->y1 = a->y1 > b->y1 ? a->y1 : b->y1; dest->y2 = a->y2 < b->y2 ? a->y2 : b->y2; if (dest->x1 >= dest->x2 || dest->y1 >= dest->y2) dest->x1 = dest->x2 = dest->y1 = dest->y2 = 0; } static void x86_crtc_box(xf86CrtcPtr crtc, BoxPtr crtc_box) { if (crtc->enabled) { crtc_box->x1 = crtc->x; crtc_box->x2 = crtc->x + xf86ModeWidth(&crtc->mode, crtc->rotation); crtc_box->y1 = crtc->y; crtc_box->y2 = crtc->y + xf86ModeHeight(&crtc->mode, crtc->rotation); } else crtc_box->x1 = crtc_box->x2 = crtc_box->y1 = crtc_box->y2 = 0; } static int xf86_crtc_box_area(BoxPtr box) { return (int) (box->x2 - box->x1) * (int) (box->y2 - box->y1); } /* * Return the crtc covering 'box'. If two crtcs cover a portion of * 'box', then prefer 'desired'. If 'desired' is NULL, then prefer the crtc * with greater coverage */ static xf86CrtcPtr xf86_covering_crtc(ScrnInfoPtr pScrn, BoxPtr box, xf86CrtcPtr desired, BoxPtr crtc_box_ret) { xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn); xf86CrtcPtr crtc, best_crtc; int coverage, best_coverage; int c; BoxRec crtc_box, cover_box; best_crtc = NULL; best_coverage = 0; crtc_box_ret->x1 = 0; crtc_box_ret->x2 = 0; crtc_box_ret->y1 = 0; crtc_box_ret->y2 = 0; for (c = 0; c < xf86_config->num_crtc; c++) { crtc = xf86_config->crtc[c]; x86_crtc_box(crtc, &crtc_box); x86_crtc_box_intersect(&cover_box, &crtc_box, box); coverage = xf86_crtc_box_area(&cover_box); if (coverage && crtc == desired) { *crtc_box_ret = crtc_box; return crtc; } else if (coverage > best_coverage) { *crtc_box_ret = crtc_box; best_crtc = crtc; best_coverage = coverage; } } return best_crtc; } /* * For overlay video, compute the relevant CRTC and * clip video to that. * * returning FALSE means there was a memory failure of some kind, * not that the video shouldn't be displayed */ Bool xf86_crtc_clip_video_helper(ScrnInfoPtr pScrn, xf86CrtcPtr *crtc_ret, xf86CrtcPtr desired_crtc, BoxPtr dst, INT32 *xa, INT32 *xb, INT32 *ya, INT32 *yb, RegionPtr reg, INT32 width, INT32 height) { Bool ret; RegionRec crtc_region_local; RegionPtr crtc_region = reg; if (crtc_ret) { BoxRec crtc_box; xf86CrtcPtr crtc = xf86_covering_crtc(pScrn, dst, desired_crtc, &crtc_box); if (crtc) { RegionInit(&crtc_region_local, &crtc_box, 1); crtc_region = &crtc_region_local; RegionIntersect(crtc_region, crtc_region, reg); } *crtc_ret = crtc; } ret = xf86XVClipVideoHelper(dst, xa, xb, ya, yb, crtc_region, width, height); if (crtc_region != reg) RegionUninit(&crtc_region_local); return ret; } xf86_crtc_notify_proc_ptr xf86_wrap_crtc_notify (ScreenPtr screen, xf86_crtc_notify_proc_ptr new) { if (xf86CrtcConfigPrivateIndex != -1) { ScrnInfoPtr scrn = xf86Screens[screen->myNum]; xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); xf86_crtc_notify_proc_ptr old; old = config->xf86_crtc_notify; config->xf86_crtc_notify = new; return old; } return NULL; } void xf86_unwrap_crtc_notify(ScreenPtr screen, xf86_crtc_notify_proc_ptr old) { if (xf86CrtcConfigPrivateIndex != -1) { ScrnInfoPtr scrn = xf86Screens[screen->myNum]; xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); config->xf86_crtc_notify = old; } } void xf86_crtc_notify(ScreenPtr screen) { ScrnInfoPtr scrn = xf86Screens[screen->myNum]; xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); if (config->xf86_crtc_notify) config->xf86_crtc_notify(screen); } Bool xf86_crtc_supports_gamma(ScrnInfoPtr pScrn) { if (xf86CrtcConfigPrivateIndex != -1) { xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn); xf86CrtcPtr crtc; /* for multiple drivers loaded we need this */ if (!xf86_config) return FALSE; if (xf86_config->num_crtc == 0) return FALSE; crtc = xf86_config->crtc[0]; return (crtc->funcs->gamma_set != NULL); } return FALSE; }