'\" t .\" Don't remove the line above, it tells man that tbl is needed. .\" This man page is Copyright (C) 1999 Andi Kleen . .\" Permission is granted to distribute possibly modified copies .\" of this page provided the header is included verbatim, .\" and in case of nontrivial modification author and date .\" of the modification is added to the header. .\" Based on the original comments from Alexey Kuznetsov, written with .\" help from Matthew Wilcox. .\" $Id: rtnetlink.7,v 1.8 2000/01/22 01:55:04 freitag Exp $ .TH RTNETLINK 7 2012-11-11 "Linux" "Linux Programmer's Manual" .SH NAME rtnetlink \- Linux IPv4 routing socket .SH SYNOPSIS .B #include .br .B #include .br .B #include .br .B #include .sp .BI "rtnetlink_socket = socket(AF_NETLINK, int " socket_type ", NETLINK_ROUTE);" .SH DESCRIPTION Rtnetlink allows the kernel's routing tables to be read and altered. It is used within the kernel to communicate between various subsystems, though this usage is not documented here, and for communication with user-space programs. Network routes, IP addresses, link parameters, neighbor setups, queueing disciplines, traffic classes and packet classifiers may all be controlled through .B NETLINK_ROUTE sockets. It is based on netlink messages; see .BR netlink (7) for more information. .\" FIXME ? all these macros could be moved to rtnetlink(3) .SS "Routing attributes" Some rtnetlink messages have optional attributes after the initial header: .in +4n .nf struct rtattr { unsigned short rta_len; /* Length of option */ unsigned short rta_type; /* Type of option */ /* Data follows */ }; .fi .in These attributes should be only manipulated using the RTA_* macros or libnetlink, see .BR rtnetlink (3). .SS Messages Rtnetlink consists of these message types (in addition to standard netlink messages): .TP .BR RTM_NEWLINK ", " RTM_DELLINK ", " RTM_GETLINK Create, remove or get information about a specific network interface. These messages contain an .I ifinfomsg structure followed by a series of .I rtattr structures. .nf struct ifinfomsg { unsigned char ifi_family; /* AF_UNSPEC */ unsigned short ifi_type; /* Device type */ int ifi_index; /* Interface index */ unsigned int ifi_flags; /* Device flags */ unsigned int ifi_change; /* change mask */ }; .fi .\" FIXME ifi_type .I ifi_flags contains the device flags, see .BR netdevice (7); .I ifi_index is the unique interface index, .I ifi_change is reserved for future use and should be always set to 0xFFFFFFFF. .na .TS tab(:); c s s l l l. Routing attributes rta_type:value type:description _ IFLA_UNSPEC:-:unspecified. IFLA_ADDRESS:hardware address:interface L2 address IFLA_BROADCAST:hardware address:L2 broadcast address. IFLA_IFNAME:asciiz string:Device name. IFLA_MTU:unsigned int:MTU of the device. IFLA_LINK:int:Link type. IFLA_QDISC:asciiz string:Queueing discipline. IFLA_STATS:T{ see below T}:Interface Statistics. .TE .ad .sp The value type for .B IFLA_STATS is .IR "struct rtnl_link_stats" .RI ( "struct net_device_stats" in Linux 2.4 and earlier). .TP .BR RTM_NEWADDR ", " RTM_DELADDR ", " RTM_GETADDR Add, remove or receive information about an IP address associated with an interface. In Linux 2.2, an interface can carry multiple IP addresses, this replaces the alias device concept in 2.0. In Linux 2.2, these messages support IPv4 and IPv6 addresses. They contain an .I ifaddrmsg structure, optionally followed by .I rtattr routing attributes. .nf struct ifaddrmsg { unsigned char ifa_family; /* Address type */ unsigned char ifa_prefixlen; /* Prefixlength of address */ unsigned char ifa_flags; /* Address flags */ unsigned char ifa_scope; /* Address scope */ int ifa_index; /* Interface index */ }; .fi .I ifa_family is the address family type (currently .B AF_INET or .BR AF_INET6 ), .I ifa_prefixlen is the length of the address mask of the address if defined for the family (like for IPv4), .I ifa_scope is the address scope, .I ifa_index is the interface index of the interface the address is associated with. .I ifa_flags is a flag word of .B IFA_F_SECONDARY for secondary address (old alias interface), .B IFA_F_PERMANENT for a permanent address set by the user and other undocumented flags. .TS tab(:); c s s l l l. Attributes rta_type:value type:description _ IFA_UNSPEC:-:unspecified. IFA_ADDRESS:raw protocol address:interface address IFA_LOCAL:raw protocol address:local address IFA_LABEL:asciiz string:name of the interface IFA_BROADCAST:raw protocol address:broadcast address. IFA_ANYCAST:raw protocol address:anycast address IFA_CACHEINFO:struct ifa_cacheinfo:Address information. .TE .\" FIXME struct ifa_cacheinfo .TP .BR RTM_NEWROUTE ", " RTM_DELROUTE ", " RTM_GETROUTE Create, remove or receive information about a network route. These messages contain an .I rtmsg structure with an optional sequence of .I rtattr structures following. For .BR RTM_GETROUTE , setting .I rtm_dst_len and .I rtm_src_len to 0 means you get all entries for the specified routing table. For the other fields, except .I rtm_table and .IR rtm_protocol , 0 is the wildcard. .nf struct rtmsg { unsigned char rtm_family; /* Address family of route */ unsigned char rtm_dst_len; /* Length of destination */ unsigned char rtm_src_len; /* Length of source */ unsigned char rtm_tos; /* TOS filter */ unsigned char rtm_table; /* Routing table ID */ unsigned char rtm_protocol; /* Routing protocol; see below */ unsigned char rtm_scope; /* See below */ unsigned char rtm_type; /* See below */ unsigned int rtm_flags; }; .fi .na .TS tab(:); l l. rtm_type:Route type _ RTN_UNSPEC:unknown route RTN_UNICAST:a gateway or direct route RTN_LOCAL:a local interface route RTN_BROADCAST:T{ a local broadcast route (sent as a broadcast) T} RTN_ANYCAST:T{ a local broadcast route (sent as a unicast) T} RTN_MULTICAST:a multicast route RTN_BLACKHOLE:a packet dropping route RTN_UNREACHABLE:an unreachable destination RTN_PROHIBIT:a packet rejection route RTN_THROW:continue routing lookup in another table RTN_NAT:a network address translation rule RTN_XRESOLVE:T{ refer to an external resolver (not implemented) T} .TE .ad .na .TS tab(:); l l. rtm_protocol:Route origin. _ RTPROT_UNSPEC:unknown RTPROT_REDIRECT:T{ by an ICMP redirect (currently unused) T} RTPROT_KERNEL:by the kernel RTPROT_BOOT:during boot RTPROT_STATIC:by the administrator .TE .ad Values larger than .B RTPROT_STATIC are not interpreted by the kernel, they are just for user information. They may be used to tag the source of a routing information or to distinguish between multiple routing daemons. See .I for the routing daemon identifiers which are already assigned. .I rtm_scope is the distance to the destination: .na .TS tab(:); l l. RT_SCOPE_UNIVERSE:global route RT_SCOPE_SITE:T{ interior route in the local autonomous system T} RT_SCOPE_LINK:route on this link RT_SCOPE_HOST:route on the local host RT_SCOPE_NOWHERE:destination doesn't exist .TE .ad The values between .B RT_SCOPE_UNIVERSE and .B RT_SCOPE_SITE are available to the user. The .I rtm_flags have the following meanings: .na .TS tab(:); l l. RTM_F_NOTIFY:T{ if the route changes, notify the user via rtnetlink T} RTM_F_CLONED:route is cloned from another route RTM_F_EQUALIZE:a multipath equalizer (not yet implemented) .TE .ad .I rtm_table specifies the routing table .TS tab(:); l l. RT_TABLE_UNSPEC:an unspecified routing table RT_TABLE_DEFAULT:the default table RT_TABLE_MAIN:the main table RT_TABLE_LOCAL:the local table .TE The user may assign arbitrary values between .B RT_TABLE_UNSPEC and .BR RT_TABLE_DEFAULT . .\" Keep table on same page .bp +1 .TS tab(:); c s s l l l. Attributes rta_type:value type:description _ RTA_UNSPEC:-:ignored. RTA_DST:protocol address:Route destination address. RTA_SRC:protocol address:Route source address. RTA_IIF:int:Input interface index. RTA_OIF:int:Output interface index. RTA_GATEWAY:protocol address:The gateway of the route RTA_PRIORITY:int:Priority of route. RTA_PREFSRC:: RTA_METRICS:int:Route metric RTA_MULTIPATH:: RTA_PROTOINFO:: RTA_FLOW:: RTA_CACHEINFO:: .TE .B Fill these values in! .TP .BR RTM_NEWNEIGH ", " RTM_DELNEIGH ", " RTM_GETNEIGH Add, remove or receive information about a neighbor table entry (e.g., an ARP entry). The message contains an .I ndmsg structure. .nf struct ndmsg { unsigned char ndm_family; int ndm_ifindex; /* Interface index */ __u16 ndm_state; /* State */ __u8 ndm_flags; /* Flags */ __u8 ndm_type; }; struct nda_cacheinfo { __u32 ndm_confirmed; __u32 ndm_used; __u32 ndm_updated; __u32 ndm_refcnt; }; .fi .I ndm_state is a bit mask of the following states: .TS tab(:); l l. NUD_INCOMPLETE:a currently resolving cache entry NUD_REACHABLE:a confirmed working cache entry NUD_STALE:an expired cache entry NUD_DELAY:an entry waiting for a timer NUD_PROBE:a cache entry that is currently reprobed NUD_FAILED:an invalid cache entry NUD_NOARP:a device with no destination cache NUD_PERMANENT:a static entry .TE Valid .I ndm_flags are: .TS tab(:); l l. NTF_PROXY:a proxy arp entry NTF_ROUTER:an IPv6 router .TE .\" FIXME .\" document the members of the struct better The .I rtattr struct has the following meanings for the .I rta_type field: .TS tab(:); l l. NDA_UNSPEC:unknown type NDA_DST:a neighbor cache n/w layer destination address NDA_LLADDR:a neighbor cache link layer address NDA_CACHEINFO:cache statistics. .TE If the .I rta_type field is .B NDA_CACHEINFO then a .I struct nda_cacheinfo header follows .TP .BR RTM_NEWRULE ", " RTM_DELRULE ", " RTM_GETRULE Add, delete or retrieve a routing rule. Carries a .I struct rtmsg .TP .BR RTM_NEWQDISC ", " RTM_DELQDISC ", " RTM_GETQDISC Add, remove or get a queueing discipline. The message contains a .I struct tcmsg and may be followed by a series of attributes. .nf struct tcmsg { unsigned char tcm_family; int tcm_ifindex; /* interface index */ __u32 tcm_handle; /* Qdisc handle */ __u32 tcm_parent; /* Parent qdisc */ __u32 tcm_info; }; .fi .TS tab(:); c s s l2 l2 l. Attributes rta_type:value type:Description _ TCA_UNSPEC:-:unspecified TCA_KIND:asciiz string:Name of queueing discipline TCA_OPTIONS:byte sequence:Qdisc-specific options follow TCA_STATS:struct tc_stats:Qdisc statistics. TCA_XSTATS:qdisc specific:Module-specific statistics. TCA_RATE:struct tc_estimator:Rate limit. .TE In addition various other qdisc module specific attributes are allowed. For more information see the appropriate include files. .TP .BR RTM_NEWTCLASS ", " RTM_DELTCLASS ", " RTM_GETTCLASS Add, remove or get a traffic class. These messages contain a .I struct tcmsg as described above. .TP .BR RTM_NEWTFILTER ", " RTM_DELTFILTER ", " RTM_GETTFILTER Add, remove or receive information about a traffic filter. These messages contain a .I struct tcmsg as described above. .SH VERSIONS .B rtnetlink is a new feature of Linux 2.2. .SH BUGS This manual page is incomplete. .SH "SEE ALSO" .BR cmsg (3), .BR rtnetlink (3), .BR ip (7), .BR netlink (7)