/* Copyright (C) 1995, 1996, 1998 Aladdin Enterprises.  All rights reserved.

   This software is licensed to a single customer by Artifex Software Inc.
   under the terms of a specific OEM agreement.
 */

/*$RCSfile$ $Revision$ */
/* RasterOp / transparency type definitions */

#ifndef gsropt_INCLUDED
#  define gsropt_INCLUDED

/*
 * This file defines the types for some library extensions that are
 * motivated by PCL5 and also made available for PostScript:
 * RasterOp, source and pattern white-pixel transparency, and
 * per-pixel "render algorithm" information.
 */

/*
 * By the magic of Boolean algebra, we can operate on the rop codes using
 * Boolean operators and get the right result.  E.g., the value of
 * (rop3_S & rop3_D) is the rop3 code for S & D.  We just have to remember
 * to mask results with rop2_1 or rop3_1 if necessary.
 */

/* 2-input RasterOp */
typedef enum {
    rop2_0 = 0,
    rop2_S = 0xc,		/* source */
#define rop2_S_shift 2
    rop2_D = 0xa,		/* destination */
#define rop2_D_shift 1
    rop2_1 = 0xf,
#define rop2_operand(shift, d, s)\
  ((shift) == 2 ? (s) : (d))
    rop2_default = rop2_S
} gs_rop2_t;

/*
 * For the 3-input case, we follow H-P's inconsistent terminology:
 * the transparency mode is called pattern transparency, but the third
 * RasterOp operand is called texture, not pattern.
 */

/* 3-input RasterOp */
typedef enum {
    rop3_0 = 0,
    rop3_T = 0xf0,		/* texture */
#define rop3_T_shift 4
    rop3_S = 0xcc,		/* source */
#define rop3_S_shift 2
    rop3_D = 0xaa,		/* destination */
#define rop3_D_shift 1
    rop3_1 = 0xff,
    rop3_default = rop3_T | rop3_S
} gs_rop3_t;

/* All the transformations on rop3s are designed so that */
/* they can also be used on lops.  The only place this costs anything */
/* is in rop3_invert. */

/*
 * Invert an operand.
 */
#define rop3_invert_(op, mask, shift)\
  ( (((op) & mask) >> shift) | (((op) & (rop3_1 - mask)) << shift) |\
    ((op) & ~rop3_1) )
#define rop3_invert_D(op) rop3_invert_(op, rop3_D, rop3_D_shift)
#define rop3_invert_S(op) rop3_invert_(op, rop3_S, rop3_S_shift)
#define rop3_invert_T(op) rop3_invert_(op, rop3_T, rop3_T_shift)
/*
 * Pin an operand to 0.
 */
#define rop3_know_0_(op, mask, shift)\
  ( (((op) & (rop3_1 - mask)) << shift) | ((op) & ~mask) )
#define rop3_know_D_0(op) rop3_know_0_(op, rop3_D, rop3_D_shift)
#define rop3_know_S_0(op) rop3_know_0_(op, rop3_S, rop3_S_shift)
#define rop3_know_T_0(op) rop3_know_0_(op, rop3_T, rop3_T_shift)
/*
 * Pin an operand to 1.
 */
#define rop3_know_1_(op, mask, shift)\
  ( (((op) & mask) >> shift) | ((op) & ~(rop3_1 - mask)) )
#define rop3_know_D_1(op) rop3_know_1_(op, rop3_D, rop3_D_shift)
#define rop3_know_S_1(op) rop3_know_1_(op, rop3_S, rop3_S_shift)
#define rop3_know_T_1(op) rop3_know_1_(op, rop3_T, rop3_T_shift)
/*
 * Swap S and T.
 */
#define rop3_swap_S_T(op)\
  ( (((op) & rop3_S & ~rop3_T) << (rop3_T_shift - rop3_S_shift)) |\
    (((op) & ~rop3_S & rop3_T) >> (rop3_T_shift - rop3_S_shift)) |\
    ((op) & (~rop3_1 | (rop3_S ^ rop3_T))) )
/*
 * Account for transparency.
 */
#define rop3_use_D_when_0_(op, mask)\
  (((op) & ~(rop3_1 - mask)) | (rop3_D & ~mask))
#define rop3_use_D_when_1_(op, mask)\
  (((op) & ~mask) | (rop3_D & mask))
#define rop3_use_D_when_S_0(op) rop3_use_D_when_0_(op, rop3_S)
#define rop3_use_D_when_S_1(op) rop3_use_D_when_1_(op, rop3_S)
#define rop3_use_D_when_T_0(op) rop3_use_D_when_0_(op, rop3_T)
#define rop3_use_D_when_T_1(op) rop3_use_D_when_1_(op, rop3_T)
/*
 * Invert the result.
 */
#define rop3_not(op) ((op) ^ rop3_1)
/*
 * Test whether an operand is used.
 */
#define rop3_uses_(op, mask, shift)\
  ( ((((op) << shift) ^ (op)) & mask) != 0 )
#define rop3_uses_D(op) rop3_uses_(op, rop3_D, rop3_D_shift)
#define rop3_uses_S(op) rop3_uses_(op, rop3_S, rop3_S_shift)
#define rop3_uses_T(op) rop3_uses_(op, rop3_T, rop3_T_shift)
/*
 * Test whether an operation is idempotent, i.e., whether
 * f(D, S, T) = f(f(D, S, T), S, T).  This is equivalent to the condition that
 * for all values s and t, !( f(0,s,t) == 1 && f(1,s,t) == 0 ).
 */
#define rop3_is_idempotent(op)\
  !( (op) & ~((op) << rop3_D_shift) & rop3_D )

/* Transparency */
#define source_transparent_default false
#define pattern_transparent_default false

/*
 * We define a logical operation as a RasterOp, transparency flags,
 * and render algorithm all packed into a single integer.
 * In principle, we should use a structure, but most C implementations
 * implement structure values very inefficiently.
 */
#define lop_rop(lop) ((gs_rop3_t)((lop) & 0xff))	/* must be low-order bits */
#define lop_S_transparent 0x100
#define lop_T_transparent 0x200
#define lop_ral_shift 10
#define lop_ral_mask 0xf
typedef uint gs_logical_operation_t;

#define lop_default\
  (rop3_default |\
   (source_transparent_default ? lop_S_transparent : 0) |\
   (pattern_transparent_default ? lop_T_transparent : 0))

     /* Test whether a logical operation uses S or T. */
#define lop_uses_S(lop)\
  (rop3_uses_S(lop) || ((lop) & lop_S_transparent))
#define lop_uses_T(lop)\
  (rop3_uses_T(lop) || ((lop) & lop_T_transparent))
/* Test whether a logical operation just sets D = x if y = 0. */
#define lop_no_T_is_S(lop)\
  (((lop) & (lop_S_transparent | (rop3_1 - rop3_T))) == (rop3_S & ~rop3_T))
#define lop_no_S_is_T(lop)\
  (((lop) & (lop_T_transparent | (rop3_1 - rop3_S))) == (rop3_T & ~rop3_S))
/* Test whether a logical operation is idempotent. */
#define lop_is_idempotent(lop) rop3_is_idempotent(lop)

/*
 * Define the logical operation versions of some RasterOp transformations.
 * Note that these also affect the transparency flags.
 */
#define lop_know_S_0(lop)\
  (rop3_know_S_0(lop) & ~lop_S_transparent)
#define lop_know_T_0(lop)\
  (rop3_know_T_0(lop) & ~lop_T_transparent)
#define lop_know_S_1(lop)\
  (lop & lop_S_transparent ? rop3_D : rop3_know_S_1(lop))
#define lop_know_T_1(lop)\
  (lop & lop_T_transparent ? rop3_D : rop3_know_T_1(lop))

/* Define the interface to the table of 256 RasterOp procedures. */
typedef unsigned long rop_operand;
typedef rop_operand (*rop_proc)(P3(rop_operand D, rop_operand S, rop_operand T));

/* Define the table of operand usage by the 256 RasterOp operations. */
typedef enum {
    rop_usage_none = 0,
    rop_usage_D = 1,
    rop_usage_S = 2,
    rop_usage_DS = 3,
    rop_usage_T = 4,
    rop_usage_DT = 5,
    rop_usage_ST = 6,
    rop_usage_DST = 7
} rop_usage_t;

/* Define the table of RasterOp implementation procedures. */
extern const rop_proc rop_proc_table[256];

/* Define the table of RasterOp operand usage. */
extern const byte /*rop_usage_t*/ rop_usage_table[256];

#endif /* gsropt_INCLUDED */