From 93e5b4477ffe12f70013da027ecdc086520e027a Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Wed, 12 Sep 2012 17:27:08 -0700 Subject: intel_sprite_on: coding style fixes It was driving me nuts... Signed-off-by: Ben Widawsky --- demos/intel_sprite_on.c | 552 ++++++++++++++++++++---------------------------- 1 file changed, 234 insertions(+), 318 deletions(-) (limited to 'demos') diff --git a/demos/intel_sprite_on.c b/demos/intel_sprite_on.c index 42711946..b338fb7d 100644 --- a/demos/intel_sprite_on.c +++ b/demos/intel_sprite_on.c @@ -53,18 +53,17 @@ #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0])) -struct type_name -{ +struct type_name { int type; const char *name; }; #define type_name_fn(res) \ - static const char * res##_str(int type) { \ + static const char * res##_str(int type) { \ unsigned int i; \ for (i = 0; i < ARRAY_SIZE(res##_names); i++) { \ if (res##_names[i].type == type) \ - return res##_names[i].name; \ + return res##_names[i].name; \ } \ return "(invalid)"; \ } @@ -76,46 +75,42 @@ struct type_name encoder_type_names[] = { { DRM_MODE_ENCODER_LVDS, "LVDS" }, { DRM_MODE_ENCODER_TVDAC, "TVDAC" }, }; - type_name_fn(encoder_type) - struct type_name connector_status_names[] = { - { DRM_MODE_CONNECTED, "connected" }, - { DRM_MODE_DISCONNECTED, "disconnected" }, - { DRM_MODE_UNKNOWNCONNECTION, "unknown" }, - }; - +struct type_name connector_status_names[] = { + { DRM_MODE_CONNECTED, "connected" }, + { DRM_MODE_DISCONNECTED, "disconnected" }, + { DRM_MODE_UNKNOWNCONNECTION, "unknown" }, +}; type_name_fn(connector_status) - struct type_name connector_type_names[] = { - { DRM_MODE_CONNECTOR_Unknown, "unknown" }, - { DRM_MODE_CONNECTOR_VGA, "VGA" }, - { DRM_MODE_CONNECTOR_DVII, "DVI-I" }, - { DRM_MODE_CONNECTOR_DVID, "DVI-D" }, - { DRM_MODE_CONNECTOR_DVIA, "DVI-A" }, - { DRM_MODE_CONNECTOR_Composite, "composite" }, - { DRM_MODE_CONNECTOR_SVIDEO, "s-video" }, - { DRM_MODE_CONNECTOR_LVDS, "LVDS" }, - { DRM_MODE_CONNECTOR_Component, "component" }, - { DRM_MODE_CONNECTOR_9PinDIN, "9-pin DIN" }, - { DRM_MODE_CONNECTOR_DisplayPort, "DisplayPort" }, - { DRM_MODE_CONNECTOR_HDMIA, "HDMI-A" }, - { DRM_MODE_CONNECTOR_HDMIB, "HDMI-B" }, - { DRM_MODE_CONNECTOR_TV, "TV" }, - { DRM_MODE_CONNECTOR_eDP, "Embedded DisplayPort" }, - }; - +struct type_name connector_type_names[] = { + { DRM_MODE_CONNECTOR_Unknown, "unknown" }, + { DRM_MODE_CONNECTOR_VGA, "VGA" }, + { DRM_MODE_CONNECTOR_DVII, "DVI-I" }, + { DRM_MODE_CONNECTOR_DVID, "DVI-D" }, + { DRM_MODE_CONNECTOR_DVIA, "DVI-A" }, + { DRM_MODE_CONNECTOR_Composite, "composite" }, + { DRM_MODE_CONNECTOR_SVIDEO, "s-video" }, + { DRM_MODE_CONNECTOR_LVDS, "LVDS" }, + { DRM_MODE_CONNECTOR_Component, "component" }, + { DRM_MODE_CONNECTOR_9PinDIN, "9-pin DIN" }, + { DRM_MODE_CONNECTOR_DisplayPort, "DisplayPort" }, + { DRM_MODE_CONNECTOR_HDMIA, "HDMI-A" }, + { DRM_MODE_CONNECTOR_HDMIB, "HDMI-B" }, + { DRM_MODE_CONNECTOR_TV, "TV" }, + { DRM_MODE_CONNECTOR_eDP, "Embedded DisplayPort" }, +}; type_name_fn(connector_type) - /* - * Mode setting with the kernel interfaces is a bit of a chore. - * First you have to find the connector in question and make sure the - * requested mode is available. - * Then you need to find the encoder attached to that connector so you - * can bind it with a free crtc. - */ - struct connector -{ +/* + * Mode setting with the kernel interfaces is a bit of a chore. + * First you have to find the connector in question and make sure the + * requested mode is available. + * Then you need to find the encoder attached to that connector so you + * can bind it with a free crtc. + */ +struct connector { uint32_t id; int mode_valid; drmModeModeInfo mode; @@ -125,28 +120,25 @@ type_name_fn(connector_type) int pipe; }; -static void dump_mode( - drmModeModeInfo *mode) +static void dump_mode(drmModeModeInfo *mode) { printf(" %s %d %d %d %d %d %d %d %d %d 0x%x 0x%x %d\n", - mode->name, - mode->vrefresh, - mode->hdisplay, - mode->hsync_start, - mode->hsync_end, - mode->htotal, - mode->vdisplay, - mode->vsync_start, - mode->vsync_end, - mode->vtotal, - mode->flags, - mode->type, - mode->clock); + mode->name, + mode->vrefresh, + mode->hdisplay, + mode->hsync_start, + mode->hsync_end, + mode->htotal, + mode->vdisplay, + mode->vsync_start, + mode->vsync_end, + mode->vtotal, + mode->flags, + mode->type, + mode->clock); } -static void dump_connectors( - int gfx_fd, - drmModeRes *resources) +static void dump_connectors(int gfx_fd, drmModeRes *resources) { int i, j; @@ -163,19 +155,18 @@ static void dump_connectors( } printf("%d\t%d\t%s\t%s\t%dx%d\t\t%d\n", - connector->connector_id, - connector->encoder_id, - connector_status_str(connector->connection), - connector_type_str(connector->connector_type), - connector->mmWidth, connector->mmHeight, - connector->count_modes); + connector->connector_id, + connector->encoder_id, + connector_status_str(connector->connection), + connector_type_str(connector->connector_type), + connector->mmWidth, connector->mmHeight, + connector->count_modes); if (!connector->count_modes) continue; printf(" modes:\n"); - printf(" name refresh (Hz) hdisp hss hse htot vdisp " - "vss vse vtot flags type clock\n"); + printf(" name refresh (Hz) hdisp hss hse htot vdisp vss vse vtot flags type clock\n"); for (j = 0; j < connector->count_modes; j++) dump_mode(&connector->modes[j]); @@ -184,9 +175,7 @@ static void dump_connectors( printf("\n"); } -static void dump_crtcs( - int gfx_fd, - drmModeRes *resources) +static void dump_crtcs(int gfx_fd, drmModeRes *resources) { int i; @@ -198,15 +187,15 @@ static void dump_crtcs( crtc = drmModeGetCrtc(gfx_fd, resources->crtcs[i]); if (!crtc) { printf("could not get crtc %i: %s\n", - resources->crtcs[i], - strerror(errno)); + resources->crtcs[i], + strerror(errno)); continue; } printf("%d\t%d\t(%d,%d)\t(%dx%d)\n", - crtc->crtc_id, - crtc->buffer_id, - crtc->x, crtc->y, - crtc->width, crtc->height); + crtc->crtc_id, + crtc->buffer_id, + crtc->x, crtc->y, + crtc->width, crtc->height); dump_mode(&crtc->mode); drmModeFreeCrtc(crtc); @@ -214,9 +203,7 @@ static void dump_crtcs( printf("\n"); } -static void dump_planes( - int gfx_fd, - drmModeRes *resources) +static void dump_planes(int gfx_fd, drmModeRes *resources) { drmModePlaneRes *plane_resources; drmModePlane *ovr; @@ -225,7 +212,7 @@ static void dump_planes( plane_resources = drmModeGetPlaneResources(gfx_fd); if (!plane_resources) { printf("drmModeGetPlaneResources failed: %s\n", - strerror(errno)); + strerror(errno)); return; } @@ -235,14 +222,14 @@ static void dump_planes( ovr = drmModeGetPlane(gfx_fd, plane_resources->planes[i]); if (!ovr) { printf("drmModeGetPlane failed: %s\n", - strerror(errno)); + strerror(errno)); continue; } printf("%d\t%d\t%d\t%d,%d\t\t%d,%d\t%d\n", - ovr->plane_id, ovr->crtc_id, ovr->fb_id, - ovr->crtc_x, ovr->crtc_y, ovr->x, ovr->y, - ovr->gamma_size); + ovr->plane_id, ovr->crtc_id, ovr->fb_id, + ovr->crtc_x, ovr->crtc_y, ovr->x, ovr->y, + ovr->gamma_size); drmModeFreePlane(ovr); } @@ -251,10 +238,9 @@ static void dump_planes( return; } -static void connector_find_preferred_mode( - int gfx_fd, - drmModeRes *gfx_resources, - struct connector *c) +static void connector_find_preferred_mode(int gfx_fd, + drmModeRes *gfx_resources, + struct connector *c) { drmModeConnector *connector; drmModeEncoder *encoder = NULL; @@ -265,8 +251,8 @@ static void connector_find_preferred_mode( connector = drmModeGetConnector(gfx_fd, c->id); if (!connector) { printf("could not get connector %d: %s\n", - c->id, - strerror(errno)); + c->id, + strerror(errno)); drmModeFreeConnector(connector); return; } @@ -278,15 +264,15 @@ static void connector_find_preferred_mode( if (!connector->count_modes) { printf("connector %d has no modes\n", - c->id); + c->id); drmModeFreeConnector(connector); return; } if (connector->connector_id != c->id) { printf("connector id doesn't match (%d != %d)\n", - connector->connector_id, - c->id); + connector->connector_id, + c->id); drmModeFreeConnector(connector); return; } @@ -306,7 +292,7 @@ static void connector_find_preferred_mode( c->mode_valid = 1; } else { printf("failed to find any modes on connector %d\n", - c->id); + c->id); return; } } @@ -317,8 +303,8 @@ static void connector_find_preferred_mode( if (!encoder) { printf("could not get encoder %i: %s\n", - gfx_resources->encoders[i], - strerror(errno)); + gfx_resources->encoders[i], + strerror(errno)); drmModeFreeEncoder(encoder); continue; } @@ -357,7 +343,7 @@ static int connector_find_plane(int gfx_fd, struct connector *c) plane_resources = drmModeGetPlaneResources(gfx_fd); if (!plane_resources) { printf("drmModeGetPlaneResources failed: %s\n", - strerror(errno)); + strerror(errno)); return 0; } @@ -365,7 +351,7 @@ static int connector_find_plane(int gfx_fd, struct connector *c) ovr = drmModeGetPlane(gfx_fd, plane_resources->planes[i]); if (!ovr) { printf("drmModeGetPlane failed: %s\n", - strerror(errno)); + strerror(errno)); continue; } @@ -380,14 +366,9 @@ static int connector_find_plane(int gfx_fd, struct connector *c) return id; } -static int prepare_primary_surface( - int fd, - int prim_width, - int prim_height, - uint32_t *prim_handle, - uint32_t *prim_stride, - uint32_t *prim_size, - int tiled) +static int prepare_primary_surface(int fd, int prim_width, int prim_height, + uint32_t *prim_handle, uint32_t *prim_stride, + uint32_t *prim_size, int tiled) { uint32_t bytes_per_pixel = sizeof(uint32_t); uint32_t *prim_fb_ptr; @@ -395,7 +376,7 @@ static int prepare_primary_surface( if (bytes_per_pixel != sizeof(uint32_t)) { printf("Bad bytes_per_pixel for primary surface: %d\n", - bytes_per_pixel); + bytes_per_pixel); return -EINVAL; } @@ -431,14 +412,12 @@ static int prepare_primary_surface( set_tiling.stride = *prim_stride; if (ioctl(fd, DRM_IOCTL_I915_GEM_SET_TILING, &set_tiling)) { printf("Set tiling failed: %s (stride=%d, size=%d)\n", - strerror(errno), *prim_stride, *prim_size); + strerror(errno), *prim_stride, *prim_size); return -1; } } - prim_fb_ptr = gem_mmap(fd, - *prim_handle, *prim_size, - PROT_READ | PROT_WRITE); + prim_fb_ptr = gem_mmap(fd, *prim_handle, *prim_size, PROT_READ | PROT_WRITE); if (prim_fb_ptr != NULL) { // Write primary surface with gray background @@ -449,12 +428,8 @@ static int prepare_primary_surface( return 0; } -static void fill_sprite( - int sprite_width, - int sprite_height, - int sprite_stride, - int sprite_index, - void *sprite_fb_ptr) +static void fill_sprite(int sprite_width, int sprite_height, int sprite_stride, + int sprite_index, void *sprite_fb_ptr) { __u32 *pLinePat0, *pLinePat1, @@ -491,15 +466,10 @@ static void fill_sprite( return; } -static int prepare_sprite_surfaces( - int fd, - int sprite_width, - int sprite_height, - uint32_t num_surfaces, - uint32_t *sprite_handles, - uint32_t *sprite_stride, - uint32_t *sprite_size, - int tiled) +static int prepare_sprite_surfaces(int fd, int sprite_width, int sprite_height, + uint32_t num_surfaces, uint32_t *sprite_handles, + uint32_t *sprite_stride, uint32_t *sprite_size, + int tiled) { uint32_t bytes_per_pixel = sizeof(uint32_t); uint32_t *sprite_fb_ptr; @@ -557,11 +527,7 @@ static int prepare_sprite_surfaces( if (sprite_fb_ptr != NULL) { // Fill with checkerboard pattern - fill_sprite( - sprite_width, - sprite_height, - *sprite_stride, - i, sprite_fb_ptr); + fill_sprite(sprite_width, sprite_height, *sprite_stride, i, sprite_fb_ptr); munmap(sprite_fb_ptr, *sprite_size); } else { @@ -576,13 +542,8 @@ static int prepare_sprite_surfaces( return 0; } -static void ricochet( - int tiled, - int sprite_w, - int sprite_h, - int out_w, - int out_h, - int dump_info) +static void ricochet(int tiled, int sprite_w, int sprite_h, + int out_w, int out_h, int dump_info) { int ret; int gfx_fd; @@ -657,8 +618,7 @@ static void ricochet( curr_term.c_cc[VTIME] = 0 ; // Return immediately, even if // nothing has been entered. if (tcsetattr( 0, TCSANOW, &curr_term) != 0) { - printf("tcgetattr failure: %s\n", - strerror(errno)); + printf("tcgetattr failure: %s\n", strerror(errno)); return; } @@ -697,19 +657,13 @@ static void ricochet( tiled); if (ret != 0) { printf("Failed to add primary fb (%dx%d): %s\n", - prim_width, prim_height, strerror(errno)); + prim_width, prim_height, strerror(errno)); goto out; } // Add the primary surface framebuffer - ret = drmModeAddFB( - gfx_fd, - prim_width, - prim_height, - 24, 32, - prim_stride, - prim_handle, - &prim_fb_id); + ret = drmModeAddFB(gfx_fd, prim_width, prim_height, 24, 32, + prim_stride, prim_handle, &prim_fb_id); gem_close(gfx_fd, prim_handle); if (ret != 0) { @@ -719,18 +673,13 @@ static void ricochet( } // Allocate and fill sprite surfaces - ret = prepare_sprite_surfaces( - gfx_fd, - sprite_w, - sprite_h, - num_surfaces, - &sprite_handles[0], - &sprite_stride, - &sprite_size, - tiled); + ret = prepare_sprite_surfaces(gfx_fd, sprite_w, sprite_h, num_surfaces, + &sprite_handles[0], + &sprite_stride, &sprite_size, + tiled); if (ret != 0) { printf("Preparation of sprite surfaces failed %dx%d\n", - sprite_w, sprite_h); + sprite_w, sprite_h); goto out; } @@ -746,16 +695,15 @@ static void ricochet( pitches[3] = sprite_stride; memset(offsets, 0, sizeof(offsets)); - ret = drmModeAddFB2( - gfx_fd, - sprite_w, sprite_h, DRM_FORMAT_XRGB8888, - handles, pitches, offsets, &sprite_fb_id[sprite_index], - plane_flags); + ret = drmModeAddFB2(gfx_fd, sprite_w, sprite_h, + DRM_FORMAT_XRGB8888, + handles, pitches, offsets, + &sprite_fb_id[sprite_index], plane_flags); gem_close(gfx_fd, sprite_handles[sprite_index]); if (ret) { printf("Failed to add sprite fb (%dx%d): %s\n", - sprite_w, sprite_h, strerror(errno)); + sprite_w, sprite_h, strerror(errno)); sprite_index--; while (sprite_index >= 0) { @@ -768,51 +716,48 @@ static void ricochet( if (dump_info != 0) { printf("Displayed Mode Connector struct:\n" - " .id = %d\n" - " .mode_valid = %d\n" - " .crtc = %d\n" - " .pipe = %d\n" - " drmModeModeInfo ...\n" - " .name = %s\n" - " .type = %d\n" - " .flags = %08x\n" - " drmModeEncoder ...\n" - " .encoder_id = %d\n" - " .encoder_type = %d (%s)\n" - " .crtc_id = %d\n" - " .possible_crtcs = %d\n" - " .possible_clones = %d\n" - " drmModeConnector ...\n" - " .connector_id = %d\n" - " .encoder_id = %d\n" - " .connector_type = %d (%s)\n" - " .connector_type_id = %d\n\n", - curr_connector.id, - curr_connector.mode_valid, - curr_connector.crtc, - curr_connector.pipe, - curr_connector.mode.name, - curr_connector.mode.type, - curr_connector.mode.flags, - curr_connector.encoder->encoder_id, - curr_connector.encoder->encoder_type, - encoder_type_str(curr_connector.encoder->encoder_type), - curr_connector.encoder->crtc_id, - curr_connector.encoder->possible_crtcs, - curr_connector.encoder->possible_clones, - curr_connector.connector->connector_id, - curr_connector.connector->encoder_id, - curr_connector.connector->connector_type, - connector_type_str(curr_connector.connector->connector_type), - curr_connector.connector->connector_type_id); + " .id = %d\n" + " .mode_valid = %d\n" + " .crtc = %d\n" + " .pipe = %d\n" + " drmModeModeInfo ...\n" + " .name = %s\n" + " .type = %d\n" + " .flags = %08x\n" + " drmModeEncoder ...\n" + " .encoder_id = %d\n" + " .encoder_type = %d (%s)\n" + " .crtc_id = %d\n" + " .possible_crtcs = %d\n" + " .possible_clones = %d\n" + " drmModeConnector ...\n" + " .connector_id = %d\n" + " .encoder_id = %d\n" + " .connector_type = %d (%s)\n" + " .connector_type_id = %d\n\n", + curr_connector.id, + curr_connector.mode_valid, + curr_connector.crtc, + curr_connector.pipe, + curr_connector.mode.name, + curr_connector.mode.type, + curr_connector.mode.flags, + curr_connector.encoder->encoder_id, + curr_connector.encoder->encoder_type, + encoder_type_str(curr_connector.encoder->encoder_type), + curr_connector.encoder->crtc_id, + curr_connector.encoder->possible_crtcs, + curr_connector.encoder->possible_clones, + curr_connector.connector->connector_id, + curr_connector.connector->encoder_id, + curr_connector.connector->connector_type, + connector_type_str(curr_connector.connector->connector_type), + curr_connector.connector->connector_type_id); printf("Sprite surface dimensions = %dx%d\n" - "Sprite output dimensions = %dx%d\n" - "Press any key to continue >\n", - sprite_w, - sprite_h, - out_w, - out_h); + "Sprite output dimensions = %dx%d\n" + "Press any key to continue >\n", + sprite_w, sprite_h, out_w, out_h); // Wait for a key-press while( read(0, &key, 1) == 0); @@ -821,19 +766,12 @@ static void ricochet( } // Set up the primary display mode - ret = drmModeSetCrtc( - gfx_fd, - curr_connector.crtc, - prim_fb_id, - 0, 0, - &curr_connector.id, - 1, - &curr_connector.mode); - if (ret != 0) - { + ret = drmModeSetCrtc(gfx_fd, curr_connector.crtc, prim_fb_id, + 0, 0, &curr_connector.id, 1, &curr_connector.mode); + if (ret != 0) { printf("Failed to set mode (%dx%d@%dHz): %s\n", - prim_width, prim_height, curr_connector.mode.vrefresh, - strerror(errno)); + prim_width, prim_height, curr_connector.mode.vrefresh, + strerror(errno)); continue; } @@ -842,8 +780,7 @@ static void ricochet( set.min_value = 0; set.max_value = 0; set.flags = I915_SET_COLORKEY_NONE; - ret = drmCommandWrite(gfx_fd, DRM_I915_SET_SPRITE_COLORKEY, &set, - sizeof(set)); + ret = drmCommandWrite(gfx_fd, DRM_I915_SET_SPRITE_COLORKEY, &set, sizeof(set)); assert(ret == 0); // Set up sprite output dimensions, initial position, etc. @@ -868,15 +805,13 @@ static void ricochet( // Bounce sprite off the walls while (keep_moving) { // Obtain system time in usec. - if (gettimeofday( &stTimeVal, NULL ) != 0) { - printf("gettimeofday error: %s\n", - strerror(errno)); - } else { + if (gettimeofday( &stTimeVal, NULL ) != 0) + printf("gettimeofday error: %s\n", strerror(errno)); + else currTime = ((long long)stTimeVal.tv_sec * 1000000) + stTimeVal.tv_usec; - } // Check if it's time to flip the sprite surface - if (currTime - prevFlipTime > deltaFlipTime) { + if (currTime - prevFlipTime > deltaFlipTime) { sprite_index = (sprite_index + 1) % num_surfaces; prevFlipTime = currTime; @@ -884,19 +819,12 @@ static void ricochet( // Move the sprite on the screen and flip // the surface if the index has changed - if (drmModeSetPlane( - gfx_fd, - sprite_plane_id, - curr_connector.crtc, - sprite_fb_id[sprite_index], - plane_flags, - sprite_x, sprite_y, - out_w, out_h, - 0, 0, - sprite_w, sprite_h)) { - printf("Failed to enable sprite plane: %s\n", - strerror(errno)); - } + if (drmModeSetPlane(gfx_fd, sprite_plane_id, curr_connector.crtc, + sprite_fb_id[sprite_index], plane_flags, + sprite_x, sprite_y, + out_w, out_h, + 0, 0, sprite_w, sprite_h)) + printf("Failed to enable sprite plane: %s\n", strerror(errno)); // Check if it's time to move the sprite surface if (currTime - prevMoveTime > deltaMoveTime) { @@ -928,40 +856,38 @@ static void ricochet( // Fetch a key from input (non-blocking) if (read(0, &key, 1) == 1) { switch (key) { - case 'q': // Kill the program - case 'Q': - goto out; - break; - case 's': // Slow down sprite movement; - deltaMoveTime = (deltaMoveTime * 100) / 90; - if (deltaMoveTime > 800000) { - deltaMoveTime = 800000; - } - break; - case 'S': // Speed up sprite movement; - deltaMoveTime = (deltaMoveTime * 100) / 110; - if (deltaMoveTime < 2000) { - deltaMoveTime = 2000; - } - break; - case 'f': // Slow down sprite flipping; - deltaFlipTime = (deltaFlipTime * 100) / 90; - if (deltaFlipTime > 1000000) { - deltaFlipTime = 1000000; - } - break; - case 'F': // Speed up sprite flipping; - deltaFlipTime = (deltaFlipTime * 100) / 110; - if (deltaFlipTime < 20000) { - deltaFlipTime = 20000; - } - break; - case 'n': // Next connector - case 'N': - keep_moving = 0; - break; - default: - break; + case 'q': // Kill the program + case 'Q': + goto out; + break; + case 's': // Slow down sprite movement; + deltaMoveTime = (deltaMoveTime * 100) / 90; + if (deltaMoveTime > 800000) { + deltaMoveTime = 800000; + } + break; + case 'S': // Speed up sprite movement; + deltaMoveTime = (deltaMoveTime * 100) / 110; + if (deltaMoveTime < 2000) { + deltaMoveTime = 2000; + } + break; + case 'f': // Slow down sprite flipping; + deltaFlipTime = (deltaFlipTime * 100) / 90; + if (deltaFlipTime > 1000000) + deltaFlipTime = 1000000; + break; + case 'F': // Speed up sprite flipping; + deltaFlipTime = (deltaFlipTime * 100) / 110; + if (deltaFlipTime < 20000) + deltaFlipTime = 20000; + break; + case 'n': // Next connector + case 'N': + keep_moving = 0; + break; + default: + break; } // Purge unread characters @@ -980,8 +906,7 @@ out: tcflush(0, TCIFLUSH); // Restore previous terminal settings if (tcsetattr( 0, TCSANOW, &orig_term) != 0) { - printf("tcgetattr failure: %s\n", - strerror(errno)); + printf("tcgetattr failure: %s\n", strerror(errno)); return; } @@ -991,18 +916,18 @@ out: static void usage(char *name) { printf("usage: %s -s x [-dhto]\n" - "\t-d\t[optional] dump mode information\n" - "\t-h\t[optional] output help message\n" - "\t-t\t[optional] enable tiling\n" - "\t-o\t[optional] x\n\n" - "Keyboard control for sprite movement and flip rate ...\n" - "\t'q' or 'Q' - Quit the program\n" - "\t'n' or 'N' - Switch to next display\n" - "\t's' - Slow sprite movement\n" - "\t'S' - Speed up sprite movement\n" - "\t'f' - Slow sprite surface flipping\n" - "\t'F' - Speed up sprite surface flipping\n", - name); + "\t-d\t[optional] dump mode information\n" + "\t-h\t[optional] output help message\n" + "\t-t\t[optional] enable tiling\n" + "\t-o\t[optional] x\n\n" + "Keyboard control for sprite movement and flip rate ...\n" + "\t'q' or 'Q' - Quit the program\n" + "\t'n' or 'N' - Switch to next display\n" + "\t's' - Slow sprite movement\n" + "\t'S' - Speed up sprite movement\n" + "\t'f' - Slow sprite surface flipping\n" + "\t'F' - Speed up sprite surface flipping\n", + name); } int main(int argc, char **argv) @@ -1020,47 +945,38 @@ int main(int argc, char **argv) opterr = 0; while ((c = getopt(argc, argv, optstr)) != -1) { switch (c) { - case 'd': // Dump information - dump_info = 1; - break; - case 't': // Tiling enable - enable_tiling = 1; - break; - case 's': // Surface dimensions - if (sscanf(optarg, "%dx%d", - &plane_width, &plane_height) != 2) - usage(argv[0]); - test_overlay = 1; - break; - case 'o': // Output dimensions - if (sscanf(optarg, "%dx%d", - &out_width, &out_height) != 2) - usage(argv[0]); - break; - default: - printf("unknown option %c\n", c); - /* fall through */ - case 'h': // Help! + case 'd': // Dump information + dump_info = 1; + break; + case 't': // Tiling enable + enable_tiling = 1; + break; + case 's': // Surface dimensions + if (sscanf(optarg, "%dx%d", &plane_width, &plane_height) != 2) usage(argv[0]); - goto out; + test_overlay = 1; + break; + case 'o': // Output dimensions + if (sscanf(optarg, "%dx%d", &out_width, &out_height) != 2) + usage(argv[0]); + break; + default: + printf("unknown option %c\n", c); + /* fall through */ + case 'h': // Help! + usage(argv[0]); + goto out; } } if (test_overlay) { - if (out_width < (plane_width / 2)) { + if (out_width < (plane_width / 2)) out_width = plane_width; - } - if (out_height < (plane_height / 2)) { + if (out_height < (plane_height / 2)) out_height = plane_height; - } - ricochet(enable_tiling, - plane_width, - plane_height, - out_width, - out_height, - dump_info); + ricochet(enable_tiling, plane_width, plane_height, out_width, out_height, dump_info); } else { printf("Sprite dimensions are required:\n"); usage(argv[0]); -- cgit v1.2.3