diff options
| author | Tim-Philipp Müller <tim.muller@collabora.co.uk> | 2010-03-06 00:43:03 +0000 |
|---|---|---|
| committer | Tim-Philipp Müller <tim.muller@collabora.co.uk> | 2010-03-06 00:43:03 +0000 |
| commit | 43793782392fa32d6894878ac6b7da208f7a5cc0 (patch) | |
| tree | afbf808aabc75ff9dc1340d9376afb1226dc2794 /ChangeLog | |
| parent | bcad93975772610a8fa572964c887020a5f79670 (diff) | |
Release 0.10.19
Diffstat (limited to 'ChangeLog')
| -rw-r--r-- | ChangeLog | 1124 |
1 files changed, 1122 insertions, 2 deletions
@@ -1,9 +1,1129 @@ +=== release 0.10.19 === + +2010-03-06 Tim-Philipp Müller <tim.muller@collabora.co.uk> + + * configure.ac: + releasing 0.10.19, "Closer to the Edit" + +2010-03-03 20:29:30 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk> + + * configure.ac: + * win32/common/config.h: + 0.18.4 pre-release + +2010-03-02 18:29:41 +0100 Edward Hervey <bilboed@bilboed.com> + + * gst/matroska/matroska-demux.c: + matroskademux: Make sure we don't send invalid newsegments + Fixes #611501 + +2010-03-02 14:09:14 +0100 Edward Hervey <bilboed@bilboed.com> + + * gst/matroska/matroska-demux.c: + * gst/matroska/matroska-ids.h: + matroskademux: Mark streams as being EOS at the right time. + This allows us to stop streaming only when all streams have gone past the + segment.stop and not before. + Fixes #611501 + +2010-02-26 18:10:32 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * gst/matroska/matroska-demux.c: + matroskademux: Advance sparse streams only as much as required to keep the gap smaller than 500ms + Changing it to the newest timestamp that was ever pushed will + increase the segment start in 500ms jumps, which could be just + after the next sparse stream buffer. E.g. + Video at 1.0s, sparse stream at 0.5s would jump the + sparse stream to 1.0s. Now a new sparse stream buffer could + appear that has a timestamp of 0.9s and this would be + dropped for no good reason because of bad luck. + +2010-02-24 01:36:07 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk> + + * configure.ac: + * po/es.po: + * win32/common/config.h: + 0.10.18.3 pre-release + +2010-02-24 02:05:49 +0100 Alessandro Decina <alessandro.decina@collabora.co.uk> + + * gst/videomixer/videomixer.c: + * gst/videomixer/videomixer.h: + Make sure FLUSH_STOP is sent so not to leave downstream flushing. + +2010-02-23 17:25:54 +0100 Volker Grabsch <bugzilla.gnome.org@v.notjusthosting.com> + + * configure.ac: + configure: Use $PKG_CONFIG instead of pkg-config to fix cross compilation + Fixes bug #610839. + +2010-02-23 17:24:03 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * gst/rtpmanager/gstrtpjitterbuffer.c: + rtpjitterbuffer: Reset skew detection after instantiating the jitterbuffer + ...not only when going to READY. This sets high_level and friends to + a more useful value. + +2010-02-23 17:19:14 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * gst/rtpmanager/rtpjitterbuffer.c: + rtpjitterbuffer: Return 100 if high-level is 0 instead of dividing by zero + +2010-02-22 12:24:14 +0100 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/rtp/gstrtpmp4gdepay.c: + rtpmp4gdepay: avoid division by 0 + Avoid a division by 0 when no constantDuration was specified and when out two + timestamps are equal. + Fixes #610265 + +2010-02-22 18:20:46 +0100 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/rtp/gstrtpdvdepay.c: + * gst/rtp/gstrtpdvdepay.h: + dvdepay: don't output frames until we have a header + Wait for the complete first 6 header DIF packets before outputting a frame. + Decoders need this info to correctly decode the data. + Fixes #610556 + +2010-02-22 20:55:29 +0100 David Hoyt <dhoyt@llnl.gov> + + * ext/jpeg/gstjpegdec.c: + jpegdec: Fix invalid memory access by first checking and then reading + Fixes bug #610483. + +2010-02-18 09:05:50 +0100 Philippe Normand <phil@base-art.net> + + * ext/pulse/pulsesink.c: + pulsesink: gst_pulsesink_get_mute: set result earlier. + In the cases where no buffer was process yet or the index is not + available, get_pulsesink_get_mute() would unconditionally return + FALSE. + https://bugzilla.gnome.org/show_bug.cgi?id=610337 + +2010-02-19 12:35:29 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk> + + * pkgconfig/gstreamer-plugins-good-uninstalled.pc.in: + pkgconfig: fix gstreamer-plugins-good uninstalled .pc file + Fix gst-plugins-base reference/requirement. This caused spurious + problems with uninstalled -ugly/-bad not finding -good plugins in + their unit tests (when distchecking). + +2010-02-19 01:03:31 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk> + + * configure.ac: + * po/lv.po: + * win32/common/config.h: + 0.10.18.2 pre-release + +2010-02-19 00:54:13 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk> + + * tests/check/elements/.gitignore: + * tests/examples/shapewipe/.gitignore: + Make git ignore shapewipe examples and tests + +2010-02-19 00:46:40 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk> + + * gst/flv/gstflvparse.c: + flvdemux: minor micro-optimisation + We know these values don't change during the loop, but the compiler + doesn't and has to re-check them for every iteration. + +2010-02-19 00:39:50 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk> + + * gst/flv/gstflvparse.c: + flvdemux: remove static keyword from variables that shouldn't be static + Multiple flvparse/flvdemux instances should be able to operate without + trampling over each other by accidentally re-using the same (static) + variables. (Spotted by Mark Nauwelaerts) + +2010-02-16 02:07:07 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk> + + * gst/rtpmanager/gstrtpjitterbuffer.c: + docs: add Since: markers for new jitterbuffer properties + +2010-02-18 18:20:24 +0100 Robert Swain <robert.swain@collabora.co.uk> + + * gst/qtdemux/qtdemux.c: + qtdemux: Fix off-by-one logic error in frame rate cap regression commit + +2010-02-17 16:27:33 -0300 Thiago Santos <thiago.sousa.santos@collabora.co.uk> + + * gst/qtdemux/qtdemux.c: + qtdemux: Use the correct duration when comparing segments + Do not confuse QtDemuxSegments with GstSegments when + comparing the total file duration with the segment duration + Fixes #610296 + +2010-02-17 18:06:29 +0100 Robert Swain <robert.swain@collabora.co.uk> + + * gst/qtdemux/qtdemux.c: + qtdemux: add durations modulo 1<<32 + For calculating the durations of each sample, we are supposed to add each + duration modulo 1<<32 so make the elapsed time counter a uint32. + Fixes #610280 + +2010-02-16 21:05:24 +0100 Anders Skargren <anders.skargren at axis.com> + + * gst/multipart/multipartdemux.c: + multipartdemux: improve header mime-type parsing + Make the handing of the mime type within the "boundary" a bit less naive. + The standard for MIME allows parameters to follow the "type" / "subtype" + clause separated from the mime type by ';'. + Modifies the multipartdemuxer's header parsing so it doesnt assume + the whole line after "content-type:" is the mime type and thus makes it a bit + more resilient to finding absurd mime types in the case where parameters are + added. + Fixes #604711 + +2010-02-16 19:53:09 +0100 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/rtsp/gstrtspsrc.c: + rtspsrc: avoid stopping NULL tasks + Check the task for NULL, it could be paused and set to NULL before. + +2010-02-16 16:22:28 +0100 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk> + + * gst/qtdemux/qtdemux.c: + qtdemux: fix ALAC codec-data handling + ALAC codec-data apparently comes in (at least) two flavours (mov, mp4), + so use atom based parsing to retrieve required data, rather than + aiming for a specific offset. + See also #580731. + +2010-02-16 15:50:23 +0100 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk> + + * gst/qtdemux/qtdemux.c: + qtdemux: fix debug message + +2010-02-11 19:39:04 +0100 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk> + + * gst/qtdemux/qtdemux.c: + * gst/qtdemux/qtdemux_types.h: + qtdemux: handle signed values in 3GPP location tag + +2010-02-08 21:35:53 +0100 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk> + + * gst/rtsp/gstrtspsrc.c: + rtspsrc: fix typo in debug message + +2010-02-16 15:00:13 +0100 Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk> + + * gst/avi/gstavidemux.c: + avidemux: reset some more stream state after seek + In particular, fixes non-flushing seek. + +2010-02-16 14:44:11 +0100 Robert Swain <robert.swain@collabora.co.uk> + + * gst/qtdemux/qtdemux.c: + qtdemux: Fix frame rate cap regression + Look for a non-zero min_duration during initialisation to avoid + incorrect frame rate caps. + +2010-02-16 10:13:17 +0200 Stefan Kost <ensonic@users.sf.net> + + * sys/v4l2/gstv4l2bufferpool.c: + v4l2: log more details in buffer pool finalize + Helps to align with the loggin from libv4l. + +2010-02-16 10:11:40 +0200 Stefan Kost <ensonic@users.sf.net> + + * sys/v4l2/gstv4l2object.c: + v4l2: init datastructures after pre-conditions checks + +2010-02-16 10:10:45 +0200 Stefan Kost <ensonic@users.sf.net> + + * ext/jpeg/gstjpegenc.c: + jpegenc: add a fixme for handling other YUV variants + +2010-02-16 01:40:19 +0000 Brian Cameron <brian.cameron@sun.com> + + * gst/matroska/matroska-demux.c: + matroska: fix GST_ELEMENT_ERROR usage + Fixes #610053. + +2010-02-16 00:50:15 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk> + + * configure.ac: + configure: fix up GST_CXXFLAGS properly + We don't want C specific flags in GST_CXXFLAGS, so base it on the + GST_CFLAGS that only contains the pkg-config CFLAGS but none of + the GST_OPTION_CFLAGS. Also, we only need the local includes once. + Fix typo as well (GST_FLAGS -> GST_CFLAGS). + +2010-02-15 23:13:46 +0200 Stefan Kost <ensonic@users.sf.net> + + * configure.ac: + configure: base GST_CXXFLAGS on --cflags from pkg-config + pkg-config sets GST_CFLAGS and GST_LIBS. We need to use CFLAGS as a starting + point for for both C and CXX settings. + +2010-01-20 18:52:51 +0100 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/rtpmanager/gstrtpbin.c: + * gst/rtpmanager/gstrtpsession.c: + rtpbin: remove use of ntp_ns_base + +2010-01-20 18:22:20 +0100 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/rtpmanager/gstrtpsession.c: + * gst/rtpmanager/rtpsession.c: + * gst/rtpmanager/rtpsession.h: + * gst/rtpmanager/rtpstats.h: + rtpbin: remove more ntpnstime and cleanups + Remove some code where we pass ntpnstime around, we can do most things with the + running_time just fine. + Rename a variable in the ArrivalStats struct so that it's clear that this is the + current system time. + +2010-01-20 18:19:34 +0100 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/rtpmanager/rtpsource.c: + rtpsource: use running_time for jitter + Use the running_time to calculate the jitter instead of the ntp time. Part of + the plan to get rid of ntpnsbase. + +2010-01-20 17:04:03 +0100 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/rtpmanager/gstrtpsession.c: + * gst/rtpmanager/rtpsession.c: + * gst/rtpmanager/rtpsession.h: + * gst/rtpmanager/rtpsource.c: + * gst/rtpmanager/rtpsource.h: + rtpbin: change how NTP time is calculated in RTCP + Don't calculate the NTP time based on the running_time of the pipeline but from + the systemclock. This allows us to generate more accurate NTP timestamps in case + the systemclock is synchronized with NTP or similar. + +2010-02-15 12:12:36 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk> + + * sys/v4l2/v4l2_calls.c: + v4l2: printf format string fix + The compiler wants a cast here even though the type is already + typedefed as 64-bit integer (presumably because glib has typedefed + guint64 to unsigned long here). + +2010-02-15 10:33:02 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk> + + * gst/matroska/matroska-demux.c: + matroska: fix printf format string + +2010-02-15 00:50:10 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk> + + * ext/raw1394/gst1394clock.h: + * gst/matroska/ebml-write.h: + * gst/rtpmanager/gstrtpjitterbuffer.h: + raw1394, matroska, rtpmanager: remove padding from structures + None of these element and class structures are in public headers, + so don't need padding. + +2010-02-15 00:47:11 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk> + + * po/af.po: + * po/az.po: + * po/bg.po: + * po/ca.po: + * po/cs.po: + * po/da.po: + * po/de.po: + * po/el.po: + * po/en_GB.po: + * po/es.po: + * po/eu.po: + * po/fi.po: + * po/fr.po: + * po/hu.po: + * po/id.po: + * po/it.po: + * po/ja.po: + * po/lt.po: + * po/lv.po: + * po/mt.po: + * po/nb.po: + * po/nl.po: + * po/or.po: + * po/pl.po: + * po/pt_BR.po: + * po/ru.po: + * po/sk.po: + * po/sq.po: + * po/sr.po: + * po/sv.po: + * po/tr.po: + * po/uk.po: + * po/vi.po: + * po/zh_CN.po: + * po/zh_HK.po: + * po/zh_TW.po: + po: update for new translator comment + +2010-02-15 00:45:51 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk> + + * ext/pulse/pulsesink.c: + pulsesink: add comment for translators for 'x by y' message + Fixes #609724. + +2010-02-15 01:28:44 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * ext/cairo/gstcairorender.c: + cairorender: Fix leaking of pad templates + +2010-02-15 00:50:27 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * tests/check/elements/shapewipe.c: + shapewipe: Fix unit test for latest changes + Now the alpha is multiplied with the already existing alpha + value instead of simply ignoring it and the luma/chroma values + are kept, even if the output is 100% transparent. + +2010-02-15 00:47:08 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * tests/check/elements/shapewipe.c: + shapewipe: Improve unit test output on errors + +2010-02-14 23:17:20 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * common: + Automatic update of common submodule + From 96dc793 to 44ecce7 + +2010-02-13 23:28:06 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk> + + * configure.ac: + configure: bump -base requirement to git + For GST_RIFF_TAG_JUNQ. + +2010-02-12 16:11:30 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk> + + * sys/v4l2/gstv4l2.c: + v4l2sink: change rank to NONE so it is never autoplugged + +2010-02-13 18:18:42 +0100 Edward Hervey <bilboed@bilboed.com> + + * gst/flv/gstflvparse.c: + flvdemux: Audio tags without any content are valid. + We silently ignore them instead of erroring out. + +2010-02-13 18:07:50 +0100 Edward Hervey <bilboed@bilboed.com> + + * gst/flv/gstflvparse.c: + flvdemux: Fix GST_CLOCK_DIFF usage. + It was previously checking for DIFF(a, b > 6 * GST_SECOND) instead of + the proper DIFF(a,b) > 6 * GST_SECOND + +2010-02-13 16:27:07 +0100 Edward Hervey <bilboed@bilboed.com> + + * gst/flv/gstflvdemux.c: + flvdemux: Don't forget to reset the indexed variable when cleaning up + +2010-02-13 11:01:53 +0100 Edward Hervey <bilboed@bilboed.com> + + * gst/flv/gstflvparse.c: + flvdemux: Speedup GstIndex usage + Used the _add_associationv variant of GstIndex since we know how many + associations we're adding. Trims up to 50% from index generation time. + Note : It would be great if the index could be generated on the fly or + on request as opposed to being fully created at startup. + +2010-02-12 19:32:27 +0100 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/rtpmanager/rtpjitterbuffer.c: + jitterbuffer: don't resync to invalid timestamps + If we detect backward timestamps on the server, don't try to resync when we + don't have an input timestamp (such as when using RTSP over TCP) instead, do + nothing but assume the timestamp was ok, it will correct itself when time goes + forwards. + +2010-02-12 17:21:43 +0100 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/rtpmanager/gstrtpbin.c: + rtpbin: fix typo + +2010-02-12 16:47:29 +0100 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/rtpmanager/gstrtpjitterbuffer.c: + jitterbuffer: start out active and not buffering + There is no need to set the latency in the jittebuffer in _init, we will set + that later when going to PAUSED. + Set the jitterbuffer active and not buffering when starting. + +2010-01-27 17:57:55 +0100 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/rtpmanager/gstrtpbin.c: + * gst/rtpmanager/gstrtpjitterbuffer.c: + * gst/rtpmanager/rtpjitterbuffer.c: + * gst/rtpmanager/rtpjitterbuffer.h: + rtpbin: more buffering work + When deactivating jitterbuffers when the buffering starts, keep the current + percent of the jitterbuffer and also set the jitterbuffer in the buffering state + so that we know when it's filled again. + Add property to get the buffering percentage of the jitterbuffer. + +2009-10-14 16:29:35 +0200 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/rtpmanager/gstrtpjitterbuffer.c: + rtpjitterbuffer: adjust latency in buffer mode + When we are in buffer mode, adjust the buffering low/high thresholds based on + the total configured latency. If we don't and there is a huge queue or element + with a big latency downstream we might drain the complete queue immediately and + start buffering again. + +2009-10-12 11:54:07 +0200 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/rtpmanager/gstrtpjitterbuffer.c: + jitterbuffer: add ts-offset to timestamp + Add the ts-offset to the buffer timestamp to get the final output timestamp of + the buffer. + +2009-10-08 19:23:53 +0200 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/rtpmanager/gstrtpbin-marshal.list: + * gst/rtpmanager/gstrtpbin.c: + * gst/rtpmanager/gstrtpjitterbuffer.c: + * gst/rtpmanager/gstrtpjitterbuffer.h: + * gst/rtpmanager/rtpjitterbuffer.c: + rtpbin: do more accurate buffer offsets + Return the next timestamp in the jitterbuffer. + Use the min-timestamp of the jitterbuffers to calculate an offset so that the + next timestamp is pushed with a timestamp equal to running_time. + Start producing timestamps from 0 in the buffering case too. + +2009-10-08 18:42:11 +0200 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/rtpmanager/gstrtpbin.c: + rtpbin: only start buffering when < 100% + Only start buffering when the percentage message is < 100 %. + +2009-10-06 13:34:34 +0200 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/rtpmanager/gstrtpbin.c: + * gst/rtpmanager/gstrtpbin.h: + rtpbin: keep track of elapsed pause time + Keep track of the time we spend pausing the jitterbuffers when they were + buffering and distribute this elapsed time to the jitterbuffers. + Also keep the latency in nanosecond precision. + +2009-10-06 13:33:15 +0200 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/rtpmanager/gstrtpjitterbuffer.c: + * gst/rtpmanager/gstrtpjitterbuffer.h: + jitterbuffer: keep track of offset + Keep track of an outgoing offset that we add to each outgoing buffer to + compensate for PAUSE when buffering. + Adjust the offset when activating. + +2009-10-06 13:30:54 +0200 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/rtpmanager/rtpjitterbuffer.c: + jitterbuffer: report level using high watermark + +2009-10-05 21:31:59 +0200 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/rtpmanager/gstrtpbin.c: + * gst/rtpmanager/gstrtpbin.h: + * gst/rtpmanager/rtpjitterbuffer.c: + * gst/rtsp/gstrtspsrc.c: + rtpbin: pass running_time to jitterbuffer pause + Pass the current running time to the jitterbuffer when pausing or resuming so + that it calculate the right offsets. + Small cleanups and comments. + Set the default rtspsrc latency to 2 seconds. + +2009-10-05 20:09:30 +0200 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/rtpmanager/gstrtpbin.c: + * gst/rtpmanager/rtpjitterbuffer.c: + rtpbin: add some comments + +2009-10-05 19:45:35 +0200 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/rtpmanager/gstrtpbin-marshal.list: + * gst/rtpmanager/gstrtpbin.c: + * gst/rtpmanager/gstrtpbin.h: + * gst/rtpmanager/gstrtpjitterbuffer.c: + * gst/rtpmanager/gstrtpjitterbuffer.h: + * gst/rtpmanager/rtpjitterbuffer.c: + * gst/rtpmanager/rtpjitterbuffer.h: + rtpbin: more buffering updates + Add signal to pause the jitterbuffer. This will be emitted from gstrtpbin when + one of the jitterbuffers is buffering. + Make rtpbin collect the buffering messages and post a new buffering message with + the min value. + Remove the stats callback from jitterbuffer but pass a percent integer to + functions that affect the buffering state of the jitterbuffer. This allows us + then to post buffering messages from outside of the jitterbuffer lock. + +2009-10-05 13:32:17 +0200 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/rtpmanager/gstrtpbin.c: + * gst/rtpmanager/gstrtpbin.h: + * gst/rtpmanager/gstrtpjitterbuffer.c: + * gst/rtpmanager/rtpjitterbuffer.c: + * gst/rtpmanager/rtpjitterbuffer.h: + rtpbin: propagate buffer-mode property + Propagate buffer-mode property to the jitterbuffers. + Intercept BUFFERING messages in rtpbin + +2009-10-01 17:14:09 +0200 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/rtpmanager/gstrtpjitterbuffer.c: + * gst/rtpmanager/rtpjitterbuffer.c: + * gst/rtpmanager/rtpjitterbuffer.h: + jitterbuffer: do more buffering implementation + Add callback for buffering stats. + Configure the latency in the jitterbuffer instead of passing it with _insert. + Calculate buffering levels when pushing and popping + Post buffering messages. + +2009-10-01 12:46:21 +0200 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/rtpmanager/gstrtpjitterbuffer.c: + * gst/rtpmanager/rtpjitterbuffer.c: + * gst/rtpmanager/rtpjitterbuffer.h: + jitterbuffer: flesh out buffering mode some more + Add a buffering state to the jitterbuffer and wait until buffering ends before + pushing out packets. + +2009-10-01 12:09:58 +0200 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/rtpmanager/gstrtpjitterbuffer.c: + * gst/rtpmanager/rtpjitterbuffer.c: + jitterbuffer: hook up the mode property + Expose a mode property on the jitterbuffer. + Fix the case where timestamps are -1 in the check for outgoing timestamps. + +2009-10-01 11:20:08 +0200 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/rtpmanager/rtpjitterbuffer.c: + * gst/rtpmanager/rtpjitterbuffer.h: + jitterbuffer: add buffering mode options + Add getters and setters for different buffering modes that the jitterbuffer will + support. Default to the current slave mode. + +2010-02-12 15:54:37 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk> + + * sys/v4l2/gstv4l2.c: + v4lsink: lower rank to MARGINAL + +2010-02-12 16:06:45 +0100 Robert Swain <robert.swain@collabora.co.uk> + + * gst/flv/gstflvdemux.c: + * gst/flv/gstflvdemux.h: + * gst/flv/gstflvparse.c: + flvdemux: Obtain the index from the end of an flv file in push mode + Allows for better support of seeking in flv files when in push mode + +2010-01-21 11:55:15 +0100 Robert Swain <robert.swain@collabora.co.uk> + + * gst/avi/gstavidemux.c: + * gst/avi/gstavidemux.h: + avidemux: Drop video frames up to the desired keyframe after a seek + The audio packets in AVI are generally muxed ~0.5s before the + corresponding video packet. This changes causes downstream to only + receive packets with roughly corresponding timestamps. + +2010-01-19 18:35:49 +0100 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/avi/gstavidemux.c: + avidemux: more DISCONT handling + Add some debug in the DISCONT handling code. + When we receive a DISCONT in push mode, mark all streams as DISCONT. + +2010-01-19 10:51:08 +0100 Robert Swain <robert.swain@collabora.co.uk> + + * gst/avi/gstavidemux.c: + avidemux: Fix _handle_seek_push () and new segement behaviour + +2010-01-18 17:13:06 +0100 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/avi/gstavidemux.c: + avidemux: cleanups + Make sure we reset the demuxer correctly wrt parsing the index. + Don't leak pending seek events. + Rename some methods to reflect what they do and to avoid confusion with similar + method names. + Try to make the seeking threadsafe by protecting the setup code with a lock. + Make sure we post errors when a seek fails. + +2010-01-18 11:45:38 +0100 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/avi/gstavidemux.c: + * gst/avi/gstavidemux.h: + avidemux: rename some variables + seek_event -> seg_event + event_seek -> seek_event + +2010-01-15 18:00:46 +0100 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/avi/gstavidemux.c: + avidemux: take fallback duration from avih + When we have not parsed any indexes yet, we don't know the length of the streams + and we must take the length given in the avih as a fallback. + Avoid some typechecking. + +2009-12-04 15:13:12 +0100 Robert Swain <robert.swain@collabora.co.uk> + + * gst/avi/gstavidemux.c: + * gst/avi/gstavidemux.h: + avidemux: Push mode seeking support + +2010-02-01 16:04:41 +0100 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/rtsp/gstrtspsrc.c: + rtspsrc: cleanup properties + Use more default constants. + Use static strings param flag. + Init properties explicitly instead of letting gobject do this. + +2010-02-12 15:34:38 +0200 Stefan Kost <ensonic@users.sf.net> + + * ext/speex/gstspeexdec.c: + speex: add missing include + +2010-02-05 13:28:53 +0200 Stefan Kost <ensonic@users.sf.net> + + * gst/debugutils/gsttaginject.c: + taginject: fix multi-value tag example + We need to use {} to specify a list. + +2010-02-01 14:43:04 +0200 Stefan Kost <ensonic@users.sf.net> + + * gst/avi/gstavidemux.c: + * gst/wavparse/gstwavparse.c: + avi,wav: also handle JUNQ chunk in addition to JUNK + +2010-02-04 15:59:25 +0100 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/rtp/gstrtpamrpay.c: + * gst/rtp/gstrtpdvpay.c: + * gst/rtp/gstrtpg726pay.c: + * gst/rtp/gstrtpj2kpay.c: + * gst/rtp/gstrtpjpegpay.c: + * gst/rtp/gstrtpmp2tpay.c: + rtppay: don't ignore result from set_outcaps + set_outcaps can fail and we need to propagate the result upstream. + +2010-02-04 15:36:24 +0100 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/flv/gstflvparse.c: + flvparse: fix confusing debug messages + +2010-01-27 13:28:13 +0100 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/rtpmanager/gstrtpjitterbuffer.c: + jitterbuffer: add some more debug info + +2010-01-27 13:26:46 +0100 Wim Taymans <wim.taymans@collabora.co.uk> + + * ext/pulse/pulsesink.c: + pulsesink: avoid segfault when shutting down + when we are shutting down, we might still receive state updates from pulseaudio + but since we are unparented we should not do anything with the NULL parent + anymore. + +2010-01-26 18:33:27 +0100 Wim Taymans <wim.taymans@collabora.co.uk> + + * gst/videomixer/videomixer.c: + * gst/videomixer/videomixer.h: + videomixer: fix timestamp problems + When the pad with the highest framerate goes EOS, instead of not timestamping + output buffers, intepollate timestamps and durations from the last seen ones. + Fixes #608026 + +2010-02-12 11:32:40 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * docs/plugins/gst-plugins-good-plugins.args: + * docs/plugins/gst-plugins-good-plugins.hierarchy: + * docs/plugins/gst-plugins-good-plugins.interfaces: + * docs/plugins/gst-plugins-good-plugins.prerequisites: + * docs/plugins/inspect/plugin-1394.xml: + * docs/plugins/inspect/plugin-aasink.xml: + * docs/plugins/inspect/plugin-alaw.xml: + * docs/plugins/inspect/plugin-alpha.xml: + * docs/plugins/inspect/plugin-alphacolor.xml: + * docs/plugins/inspect/plugin-annodex.xml: + * docs/plugins/inspect/plugin-apetag.xml: + * docs/plugins/inspect/plugin-audiofx.xml: + * docs/plugins/inspect/plugin-auparse.xml: + * docs/plugins/inspect/plugin-autodetect.xml: + * docs/plugins/inspect/plugin-avi.xml: + * docs/plugins/inspect/plugin-cacasink.xml: + * docs/plugins/inspect/plugin-cairo.xml: + * docs/plugins/inspect/plugin-cutter.xml: + * docs/plugins/inspect/plugin-debug.xml: + * docs/plugins/inspect/plugin-deinterlace.xml: + * docs/plugins/inspect/plugin-dv.xml: + * docs/plugins/inspect/plugin-efence.xml: + * docs/plugins/inspect/plugin-effectv.xml: + * docs/plugins/inspect/plugin-equalizer.xml: + * docs/plugins/inspect/plugin-esdsink.xml: + * docs/plugins/inspect/plugin-flac.xml: + * docs/plugins/inspect/plugin-flv.xml: + * docs/plugins/inspect/plugin-flxdec.xml: + * docs/plugins/inspect/plugin-gamma.xml: + * docs/plugins/inspect/plugin-gconfelements.xml: + * docs/plugins/inspect/plugin-gdkpixbuf.xml: + * docs/plugins/inspect/plugin-goom.xml: + * docs/plugins/inspect/plugin-goom2k1.xml: + * docs/plugins/inspect/plugin-gstrtpmanager.xml: + * docs/plugins/inspect/plugin-halelements.xml: + * docs/plugins/inspect/plugin-icydemux.xml: + * docs/plugins/inspect/plugin-id3demux.xml: + * docs/plugins/inspect/plugin-interleave.xml: + * docs/plugins/inspect/plugin-jpeg.xml: + * docs/plugins/inspect/plugin-level.xml: + * docs/plugins/inspect/plugin-matroska.xml: + * docs/plugins/inspect/plugin-monoscope.xml: + * docs/plugins/inspect/plugin-mulaw.xml: + * docs/plugins/inspect/plugin-multifile.xml: + * docs/plugins/inspect/plugin-multipart.xml: + * docs/plugins/inspect/plugin-navigationtest.xml: + * docs/plugins/inspect/plugin-ossaudio.xml: + * docs/plugins/inspect/plugin-png.xml: + * docs/plugins/inspect/plugin-pulseaudio.xml: + * docs/plugins/inspect/plugin-quicktime.xml: + * docs/plugins/inspect/plugin-replaygain.xml: + * docs/plugins/inspect/plugin-rtp.xml: + * docs/plugins/inspect/plugin-rtsp.xml: + * docs/plugins/inspect/plugin-shout2send.xml: + * docs/plugins/inspect/plugin-smpte.xml: + * docs/plugins/inspect/plugin-soup.xml: + * docs/plugins/inspect/plugin-spectrum.xml: + * docs/plugins/inspect/plugin-speex.xml: + * docs/plugins/inspect/plugin-taglib.xml: + * docs/plugins/inspect/plugin-udp.xml: + * docs/plugins/inspect/plugin-video4linux2.xml: + * docs/plugins/inspect/plugin-videobalance.xml: + * docs/plugins/inspect/plugin-videobox.xml: + * docs/plugins/inspect/plugin-videocrop.xml: + * docs/plugins/inspect/plugin-videoflip.xml: + * docs/plugins/inspect/plugin-videomixer.xml: + * docs/plugins/inspect/plugin-wavenc.xml: + * docs/plugins/inspect/plugin-wavpack.xml: + * docs/plugins/inspect/plugin-wavparse.xml: + * docs/plugins/inspect/plugin-ximagesrc.xml: + * docs/plugins/inspect/plugin-y4menc.xml: + docs: Update documentation + +2010-02-12 11:18:26 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * configure.ac: + * docs/plugins/Makefile.am: + * docs/plugins/gst-plugins-good-plugins-docs.sgml: + * docs/plugins/gst-plugins-good-plugins-sections.txt: + * docs/plugins/inspect/plugin-shapewipe.xml: + * tests/check/Makefile.am: + * tests/examples/Makefile.am: + Moved 'shapewipe' from -bad to -good + Fixes bug #584536. + +2010-02-10 10:52:53 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * gst/shapewipe/gstshapewipe.c: + [MOVED FROM BAD 29/29] shapewipe: Preserve the input color values in all cases + +2010-02-10 10:50:49 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * gst/shapewipe/gstshapewipe.c: + [MOVED FROM BAD 28/29] shapewipe: Scale mask alpha values by the source alpha values + +2010-02-10 10:42:32 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * gst/shapewipe/gstshapewipe.c: + [MOVED FROM BAD 27/29] shapewipe: Fix ARGB processing + +2010-02-10 10:34:24 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * tests/examples/shapewipe/shapewipe-example.c: + [MOVED FROM BAD 26/29] shapewipe: Print some more details on error/warning messages + +2010-02-08 08:26:33 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * gst/shapewipe/gstshapewipe.c: + [MOVED FROM BAD 25/29] shapewipe: Improve/add debug output + +2010-02-08 08:20:44 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * gst/shapewipe/gstshapewipe.c: + [MOVED FROM BAD 24/29] shapewipe: Always hold the mask mutex before signalling the GCond + +2010-02-08 08:19:48 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * gst/shapewipe/gstshapewipe.c: + [MOVED FROM BAD 23/29] shapewipe: Move chain function error cases at the end of the function and add useful debug output + +2010-02-08 08:12:11 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * gst/shapewipe/gstshapewipe.c: + * gst/shapewipe/gstshapewipe.h: + [MOVED FROM BAD 22/29] shapewipe: Fix race condition during shutdown that can lead to a deadlock + +2010-02-08 08:11:33 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * gst/shapewipe/gstshapewipe.c: + [MOVED FROM BAD 21/29] shapewipe: Drop mask buffer on FLUSH events + +2010-02-08 08:09:55 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * gst/shapewipe/gstshapewipe.c: + * gst/shapewipe/gstshapewipe.h: + [MOVED FROM BAD 20/29] shapewipe: Update copyright year + +2010-02-08 08:08:44 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * gst/shapewipe/gstshapewipe.c: + [MOVED FROM BAD 19/29] shapewipe: Don't reset properties when going PAUSED->READY + Also use defines for the default values of the properties. + +2010-01-16 16:52:11 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * gst/shapewipe/gstshapewipe.c: + [MOVED FROM BAD 18/29] shapewipe: Replace floating point arithmetic in the inner processing loops by integer arithmetic + +2009-12-10 10:40:10 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * gst/shapewipe/gstshapewipe.c: + [MOVED FROM BAD 17/29] shapewipe: Don't do pointer dereferences in the processing loop + Lowers the time taken there in my testcase from 6.91% to 6.20% + as measured by callgrind. + +2009-07-08 17:59:29 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * gst/shapewipe/gstshapewipe.c: + [MOVED FROM BAD 16/29] shapewipe: Add BGRA support for video in/output + +2009-07-02 11:24:48 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * gst/shapewipe/gstshapewipe.c: + * gst/shapewipe/gstshapewipe.h: + [MOVED FROM BAD 15/29] shapewipe: Add support for ARGB video input/output + +2009-06-23 18:23:13 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * gst/shapewipe/gstshapewipe.c: + [MOVED FROM BAD 14/29] shapewipe: Correctly handle 0/1 fps + +2009-06-09 19:14:41 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * gst/shapewipe/gstshapewipe.c: + * gst/shapewipe/gstshapewipe.h: + [MOVED FROM BAD 13/29] shapewipe: Implement basic QoS + This change is based on Tim's QoS implementation + for jpegdec. + +2009-06-09 18:45:19 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * gst/shapewipe/gstshapewipe.c: + [MOVED FROM BAD 12/29] shapewipe: Proxy queries on the video pads to the correct peers + +2009-06-09 18:37:43 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * gst/shapewipe/gstshapewipe.c: + [MOVED FROM BAD 11/29] shapewipe: Proxy bufferalloc on the video sinkpad + +2009-06-09 18:25:13 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * gst/shapewipe/gstshapewipe.c: + [MOVED FROM BAD 10/29] shapewipe: Try to work inplace if possible + This saves one new, large allocation per frame for the + most cases. + +2009-06-04 08:56:14 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * tests/check/elements/shapewipe.c: + [MOVED FROM BAD 09/29] shapewipe: Increase timeout of the unit test + +2009-06-01 21:24:27 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * gst/shapewipe/gstshapewipe.c: + [MOVED FROM BAD 08/29] shapewipe: Fix some issues that were exposed by the new unit test + +2009-06-01 21:24:12 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * tests/check/elements/shapewipe.c: + [MOVED FROM BAD 07/29] shapewipe: Add unit test for shapewipe + +2009-05-31 21:33:01 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * gst/shapewipe/gstshapewipe.c: + [MOVED FROM BAD 06/29] shapewipe: Add documentation and integrate into the build system + +2009-05-29 21:07:26 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * gst/shapewipe/gstshapewipe.c: + [MOVED FROM BAD 05/29] shapewipe: Adjust border to still have everything transparent at 1.0 and the other way around + +2009-05-29 16:55:25 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * gst/shapewipe/gstshapewipe.c: + * tests/examples/shapewipe/shapewipe-example.c: + [MOVED FROM BAD 04/29] shapewipe: Divide the border value by two, otherwise we use a twice a wide border + +2009-05-29 16:51:50 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * gst/shapewipe/gstshapewipe.c: + * gst/shapewipe/gstshapewipe.h: + * tests/examples/shapewipe/shapewipe-example.c: + [MOVED FROM BAD 03/29] shapewipe: Add border property to allow smooth borders + ...and use a border of 0.01 in the example application. + +2009-05-29 16:00:16 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * tests/examples/shapewipe/Makefile.am: + [MOVED FROM BAD 02/29] shapewipe: Fix Makefile of the example application + +2009-05-29 15:32:24 +0200 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * gst/shapewipe/Makefile.am: + * gst/shapewipe/gstshapewipe.c: + * gst/shapewipe/gstshapewipe.h: + * tests/examples/shapewipe/Makefile.am: + * tests/examples/shapewipe/shapewipe-example.c: + [MOVED FROM BAD 01/29] shapewipe: Add a simple shapewipe transition filter & example application + +2010-02-06 18:19:27 +0100 Sebastian Dröge <sebastian.droege@collabora.co.uk> + + * ext/flac/gstflacdec.c: + flacdec: Only flush the FLAC decoder if it wasn't created right before + If the FLAC decoder is flushed, its state will be set to frame-sync mode, + which will sync to the next *audio* frame and makes it ignore all headers. + This prevented tags and everything else to show up when using flacdec + in push mode. + Fixes bug #608843. + +2010-02-11 01:12:15 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk> + + * MAINTAINERS: + Update MAINTAINERS + +2010-02-12 00:03:09 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk> + + * configure.ac: + configure: back to development + Slushy freeze remains in effect. + === release 0.10.18 === -2010-02-10 Tim-Philipp Müller <tim.muller@collabora.co.uk> +2010-02-10 23:18:22 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk> + * ChangeLog: + * NEWS: + * RELEASE: * configure.ac: - releasing 0.10.18, "Short Circuit" + * docs/plugins/gst-plugins-good-plugins.args: + * docs/plugins/gst-plugins-good-plugins.hierarchy: + * docs/plugins/gst-plugins-good-plugins.interfaces: + * docs/plugins/gst-plugins-good-plugins.prerequisites: + * docs/plugins/inspect/plugin-1394.xml: + * docs/plugins/inspect/plugin-aasink.xml: + * docs/plugins/inspect/plugin-alaw.xml: + * docs/plugins/inspect/plugin-alpha.xml: + * docs/plugins/inspect/plugin-alphacolor.xml: + * docs/plugins/inspect/plugin-annodex.xml: + * docs/plugins/inspect/plugin-apetag.xml: + * docs/plugins/inspect/plugin-audiofx.xml: + * docs/plugins/inspect/plugin-auparse.xml: + * docs/plugins/inspect/plugin-autodetect.xml: + * docs/plugins/inspect/plugin-avi.xml: + * docs/plugins/inspect/plugin-cacasink.xml: + * docs/plugins/inspect/plugin-cairo.xml: + * docs/plugins/inspect/plugin-cutter.xml: + * docs/plugins/inspect/plugin-debug.xml: + * docs/plugins/inspect/plugin-deinterlace.xml: + * docs/plugins/inspect/plugin-dv.xml: + * docs/plugins/inspect/plugin-efence.xml: + * docs/plugins/inspect/plugin-effectv.xml: + * docs/plugins/inspect/plugin-equalizer.xml: + * docs/plugins/inspect/plugin-esdsink.xml: + * docs/plugins/inspect/plugin-flac.xml: + * docs/plugins/inspect/plugin-flv.xml: + * docs/plugins/inspect/plugin-flxdec.xml: + * docs/plugins/inspect/plugin-gamma.xml: + * docs/plugins/inspect/plugin-gconfelements.xml: + * docs/plugins/inspect/plugin-gdkpixbuf.xml: + * docs/plugins/inspect/plugin-goom.xml: + * docs/plugins/inspect/plugin-goom2k1.xml: + * docs/plugins/inspect/plugin-gstrtpmanager.xml: + * docs/plugins/inspect/plugin-halelements.xml: + * docs/plugins/inspect/plugin-icydemux.xml: + * docs/plugins/inspect/plugin-id3demux.xml: + * docs/plugins/inspect/plugin-interleave.xml: + * docs/plugins/inspect/plugin-jpeg.xml: + * docs/plugins/inspect/plugin-level.xml: + * docs/plugins/inspect/plugin-matroska.xml: + * docs/plugins/inspect/plugin-monoscope.xml: + * docs/plugins/inspect/plugin-mulaw.xml: + * docs/plugins/inspect/plugin-multifile.xml: + * docs/plugins/inspect/plugin-multipart.xml: + * docs/plugins/inspect/plugin-navigationtest.xml: + * docs/plugins/inspect/plugin-ossaudio.xml: + * docs/plugins/inspect/plugin-png.xml: + * docs/plugins/inspect/plugin-pulseaudio.xml: + * docs/plugins/inspect/plugin-quicktime.xml: + * docs/plugins/inspect/plugin-replaygain.xml: + * docs/plugins/inspect/plugin-rtp.xml: + * docs/plugins/inspect/plugin-rtsp.xml: + * docs/plugins/inspect/plugin-shout2send.xml: + * docs/plugins/inspect/plugin-smpte.xml: + * docs/plugins/inspect/plugin-soup.xml: + * docs/plugins/inspect/plugin-spectrum.xml: + * docs/plugins/inspect/plugin-speex.xml: + * docs/plugins/inspect/plugin-taglib.xml: + * docs/plugins/inspect/plugin-udp.xml: + * docs/plugins/inspect/plugin-video4linux2.xml: + * docs/plugins/inspect/plugin-videobalance.xml: + * docs/plugins/inspect/plugin-videobox.xml: + * docs/plugins/inspect/plugin-videocrop.xml: + * docs/plugins/inspect/plugin-videoflip.xml: + * docs/plugins/inspect/plugin-videomixer.xml: + * docs/plugins/inspect/plugin-wavenc.xml: + * docs/plugins/inspect/plugin-wavpack.xml: + * docs/plugins/inspect/plugin-wavparse.xml: + * docs/plugins/inspect/plugin-ximagesrc.xml: + * docs/plugins/inspect/plugin-y4menc.xml: + * gst-plugins-good.doap: + * win32/common/config.h: + Release 0.10.18 + +2010-02-10 23:17:21 +0000 Tim-Philipp Müller <tim.muller@collabora.co.uk> + + * po/af.po: + * po/az.po: + * po/bg.po: + * po/ca.po: + * po/cs.po: + * po/da.po: + * po/de.po: + * po/el.po: + * po/en_GB.po: + * po/es.po: + * po/eu.po: + * po/fi.po: + * po/fr.po: + * po/hu.po: + * po/id.po: + * po/it.po: + * po/ja.po: + * po/lt.po: + * po/lv.po: + * po/mt.po: + * po/nb.po: + * po/nl.po: + * po/or.po: + * po/pl.po: + * po/pt_BR.po: + * po/ru.po: + * po/sk.po: + * po/sq.po: + * po/sr.po: + * po/sv.po: + * po/tr.po: + * po/uk.po: + * po/vi.po: + * po/zh_CN.po: + * po/zh_HK.po: + * po/zh_TW.po: + Update .po files 2010-02-10 20:36:56 +0000 Robert Swain <robert.swain@collabora.co.uk> |