diff options
Diffstat (limited to 'po/zh_TW.po')
| -rw-r--r-- | po/zh_TW.po | 1026 |
1 files changed, 606 insertions, 420 deletions
diff --git a/po/zh_TW.po b/po/zh_TW.po index 9014c6535..2fd69da54 100644 --- a/po/zh_TW.po +++ b/po/zh_TW.po @@ -10,7 +10,7 @@ msgid "" msgstr "" "Project-Id-Version: glib 2.21.4\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2009-07-12 15:12+0800\n" +"POT-Creation-Date: 2009-07-17 19:34-0400\n" "PO-Revision-Date: 2009-07-11 15:12+0800\n" "Last-Translator: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw>\n" "Language-Team: Chinese (Taiwan) <zh-l10n@lists.linux.org.tw>\n" @@ -19,322 +19,327 @@ msgstr "" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0\n" -#: ../glib/gbookmarkfile.c:737 +#: glib/gbookmarkfile.c:737 #, c-format msgid "Unexpected attribute '%s' for element '%s'" msgstr "元件「%2$s」中有未預期的屬性「%1$s」" -#: ../glib/gbookmarkfile.c:748 ../glib/gbookmarkfile.c:819 -#: ../glib/gbookmarkfile.c:829 ../glib/gbookmarkfile.c:936 +#: glib/gbookmarkfile.c:748 glib/gbookmarkfile.c:819 glib/gbookmarkfile.c:829 +#: glib/gbookmarkfile.c:936 #, c-format msgid "Attribute '%s' of element '%s' not found" msgstr "找不到元件「%2$s」中的屬性「%1$s」" -#: ../glib/gbookmarkfile.c:1106 ../glib/gbookmarkfile.c:1171 -#: ../glib/gbookmarkfile.c:1235 ../glib/gbookmarkfile.c:1245 +#: glib/gbookmarkfile.c:1106 glib/gbookmarkfile.c:1171 +#: glib/gbookmarkfile.c:1235 glib/gbookmarkfile.c:1245 #, c-format msgid "Unexpected tag '%s', tag '%s' expected" msgstr "未預期的標籤「%s」，應為標籤「%s」" -#: ../glib/gbookmarkfile.c:1131 ../glib/gbookmarkfile.c:1145 -#: ../glib/gbookmarkfile.c:1213 ../glib/gbookmarkfile.c:1265 +#: glib/gbookmarkfile.c:1131 glib/gbookmarkfile.c:1145 +#: glib/gbookmarkfile.c:1213 glib/gbookmarkfile.c:1265 #, c-format msgid "Unexpected tag '%s' inside '%s'" msgstr "「%2$s」中有未預期的標籤「%1$s」" -#: ../glib/gbookmarkfile.c:1793 +#: glib/gbookmarkfile.c:1793 msgid "No valid bookmark file found in data dirs" msgstr "在資料目錄中找不到有效的書籤檔案" -#: ../glib/gbookmarkfile.c:1994 +#: glib/gbookmarkfile.c:1994 #, c-format msgid "A bookmark for URI '%s' already exists" msgstr "URI「%s」的書籤已經存在" -#: ../glib/gbookmarkfile.c:2040 ../glib/gbookmarkfile.c:2198 -#: ../glib/gbookmarkfile.c:2283 ../glib/gbookmarkfile.c:2363 -#: ../glib/gbookmarkfile.c:2448 ../glib/gbookmarkfile.c:2531 -#: ../glib/gbookmarkfile.c:2609 ../glib/gbookmarkfile.c:2688 -#: ../glib/gbookmarkfile.c:2730 ../glib/gbookmarkfile.c:2827 -#: ../glib/gbookmarkfile.c:2953 ../glib/gbookmarkfile.c:3143 -#: ../glib/gbookmarkfile.c:3219 ../glib/gbookmarkfile.c:3384 -#: ../glib/gbookmarkfile.c:3473 ../glib/gbookmarkfile.c:3563 -#: ../glib/gbookmarkfile.c:3691 +#: glib/gbookmarkfile.c:2040 glib/gbookmarkfile.c:2198 +#: glib/gbookmarkfile.c:2283 glib/gbookmarkfile.c:2363 +#: glib/gbookmarkfile.c:2448 glib/gbookmarkfile.c:2531 +#: glib/gbookmarkfile.c:2609 glib/gbookmarkfile.c:2688 +#: glib/gbookmarkfile.c:2730 glib/gbookmarkfile.c:2827 +#: glib/gbookmarkfile.c:2953 glib/gbookmarkfile.c:3143 +#: glib/gbookmarkfile.c:3219 glib/gbookmarkfile.c:3384 +#: glib/gbookmarkfile.c:3473 glib/gbookmarkfile.c:3563 +#: glib/gbookmarkfile.c:3691 #, c-format msgid "No bookmark found for URI '%s'" msgstr "找不到 URI「%s」的書籤" -#: ../glib/gbookmarkfile.c:2372 +#: glib/gbookmarkfile.c:2372 #, c-format msgid "No MIME type defined in the bookmark for URI '%s'" msgstr "URI「%s」書籤中沒有定義 MIME 類型" -#: ../glib/gbookmarkfile.c:2457 +#: glib/gbookmarkfile.c:2457 #, c-format msgid "No private flag has been defined in bookmark for URI '%s'" msgstr "URI「%s」書籤中沒有私有旗幟" -#: ../glib/gbookmarkfile.c:2836 +#: glib/gbookmarkfile.c:2836 #, c-format msgid "No groups set in bookmark for URI '%s'" msgstr "URI「%s」書籤中沒有設定群組" -#: ../glib/gbookmarkfile.c:3237 ../glib/gbookmarkfile.c:3394 +#: glib/gbookmarkfile.c:3237 glib/gbookmarkfile.c:3394 #, c-format msgid "No application with name '%s' registered a bookmark for '%s'" msgstr "沒有名為「%s」的應用程式註冊書籤「%s」" -#: ../glib/gbookmarkfile.c:3417 +#: glib/gbookmarkfile.c:3417 #, c-format msgid "Failed to expand exec line '%s' with URI '%s'" msgstr "以 URI‘%2$s’ 展開 exec 行‘%1$s’失敗" -#: ../glib/gconvert.c:431 ../glib/gconvert.c:509 ../glib/giochannel.c:1230 +#: glib/gconvert.c:431 glib/gconvert.c:509 glib/giochannel.c:1230 #, c-format msgid "Conversion from character set '%s' to '%s' is not supported" msgstr "不支援將字元集‘%s’轉換成‘%s’" -#: ../glib/gconvert.c:435 ../glib/gconvert.c:513 +#: glib/gconvert.c:435 glib/gconvert.c:513 #, c-format msgid "Could not open converter from '%s' to '%s'" msgstr "無法將‘%s’轉換至‘%s’" -#: ../glib/gconvert.c:632 ../glib/gconvert.c:1017 ../glib/giochannel.c:1402 -#: ../glib/giochannel.c:1444 ../glib/giochannel.c:2288 ../glib/gutf8.c:964 -#: ../glib/gutf8.c:1413 +#: glib/gconvert.c:632 glib/gconvert.c:1017 glib/giochannel.c:1402 +#: glib/giochannel.c:1444 glib/giochannel.c:2288 glib/gutf8.c:964 +#: glib/gutf8.c:1413 msgid "Invalid byte sequence in conversion input" msgstr "轉換輸入資料時遇到不正確的位元組組合" -#: ../glib/gconvert.c:638 ../glib/gconvert.c:944 ../glib/giochannel.c:1409 -#: ../glib/giochannel.c:2300 +#: glib/gconvert.c:638 glib/gconvert.c:944 glib/giochannel.c:1409 +#: glib/giochannel.c:2300 #, c-format msgid "Error during conversion: %s" msgstr "轉換時發生錯誤：%s" -#: ../glib/gconvert.c:669 ../glib/gutf8.c:960 ../glib/gutf8.c:1164 -#: ../glib/gutf8.c:1305 ../glib/gutf8.c:1409 +#: glib/gconvert.c:669 glib/gutf8.c:960 glib/gutf8.c:1164 glib/gutf8.c:1305 +#: glib/gutf8.c:1409 msgid "Partial character sequence at end of input" msgstr "輸入資料結束時字元仍未完整" -#: ../glib/gconvert.c:919 +#: glib/gconvert.c:919 #, c-format msgid "Cannot convert fallback '%s' to codeset '%s'" msgstr "無法將後備字串‘%s’的字元集轉換成‘%s’" -#: ../glib/gconvert.c:1737 +#: glib/gconvert.c:1737 #, c-format msgid "The URI '%s' is not an absolute URI using the \"file\" scheme" msgstr "URI‘%s’不是使用“file”格式的絕對 URI" -#: ../glib/gconvert.c:1747 +#: glib/gconvert.c:1747 #, c-format msgid "The local file URI '%s' may not include a '#'" msgstr "本機檔案的 URI‘%s’不應含有‘#’" -#: ../glib/gconvert.c:1764 +#: glib/gconvert.c:1764 #, c-format msgid "The URI '%s' is invalid" msgstr "URI‘%s’無效" -#: ../glib/gconvert.c:1776 +#: glib/gconvert.c:1776 #, c-format msgid "The hostname of the URI '%s' is invalid" msgstr "URI‘%s’中的主機名稱無效" -#: ../glib/gconvert.c:1792 +#: glib/gconvert.c:1792 #, c-format msgid "The URI '%s' contains invalidly escaped characters" msgstr "URI‘%s’含有「不正確跳出」的字元" -#: ../glib/gconvert.c:1887 +#: glib/gconvert.c:1887 #, c-format msgid "The pathname '%s' is not an absolute path" msgstr "路徑名稱‘%s’不是絕對路徑" -#: ../glib/gconvert.c:1897 +#: glib/gconvert.c:1897 msgid "Invalid hostname" msgstr "主機名稱無效" -#: ../glib/gdir.c:110 ../glib/gdir.c:130 +#: glib/gdir.c:110 glib/gdir.c:130 #, c-format msgid "Error opening directory '%s': %s" msgstr "開啟目錄‘%s’時發生錯誤：%s" -#: ../glib/gfileutils.c:532 ../glib/gfileutils.c:620 +#: glib/gfileutils.c:532 glib/gfileutils.c:620 #, c-format msgid "Could not allocate %lu bytes to read file \"%s\"" msgstr "無法配置 %lu 位元來讀取檔案“%s”" -#: ../glib/gfileutils.c:547 +#: glib/gfileutils.c:547 #, c-format msgid "Error reading file '%s': %s" msgstr "讀取檔案‘%s’時發生錯誤：%s" -#: ../glib/gfileutils.c:561 +#: glib/gfileutils.c:561 #, c-format msgid "File \"%s\" is too large" msgstr "檔案「%s」太過巨大" -#: ../glib/gfileutils.c:644 +#: glib/gfileutils.c:644 #, c-format msgid "Failed to read from file '%s': %s" msgstr "讀取檔案‘%s’失敗：%s" -#: ../glib/gfileutils.c:695 ../glib/gfileutils.c:782 +#: glib/gfileutils.c:695 glib/gfileutils.c:782 #, c-format msgid "Failed to open file '%s': %s" msgstr "開啟檔案「%s」失敗：%s" -#: ../glib/gfileutils.c:712 ../glib/gmappedfile.c:141 +#: glib/gfileutils.c:712 glib/gmappedfile.c:141 #, c-format msgid "Failed to get attributes of file '%s': fstat() failed: %s" msgstr "獲取檔案‘%s’的屬性失敗：fstat() 失敗：%s" -#: ../glib/gfileutils.c:746 +#: glib/gfileutils.c:746 #, c-format msgid "Failed to open file '%s': fdopen() failed: %s" msgstr "開啟檔案‘%s’失敗：fdopen() 失敗：%s" -#: ../glib/gfileutils.c:854 +#: glib/gfileutils.c:854 #, c-format msgid "Failed to rename file '%s' to '%s': g_rename() failed: %s" msgstr "檔案名稱由‘%s’改為‘%s’失敗：g_rename() 失敗：%s" -#: ../glib/gfileutils.c:896 ../glib/gfileutils.c:1328 +#: glib/gfileutils.c:896 glib/gfileutils.c:1328 #, c-format msgid "Failed to create file '%s': %s" msgstr "建立檔案‘%s’失敗：%s" -#: ../glib/gfileutils.c:910 +#: glib/gfileutils.c:910 #, c-format msgid "Failed to open file '%s' for writing: fdopen() failed: %s" msgstr "開啟檔案‘%s’作寫入失敗：fdopen() 失敗：%s" -#: ../glib/gfileutils.c:935 +#: glib/gfileutils.c:935 #, c-format msgid "Failed to write file '%s': fwrite() failed: %s" msgstr "寫入檔案‘%s’失敗：fwrite() 失敗：%s" -#: ../glib/gfileutils.c:954 +#: glib/gfileutils.c:954 #, c-format msgid "Failed to write file '%s': fflush() failed: %s" msgstr "無法寫入檔案「%s」：fflush() 失敗：%s" -#: ../glib/gfileutils.c:979 +#: glib/gfileutils.c:979 #, c-format msgid "Failed to write file '%s': fsync() failed: %s" msgstr "無法寫入檔案「%s」：fsync() 失敗：%s" -#: ../glib/gfileutils.c:997 +#: glib/gfileutils.c:997 #, c-format msgid "Failed to close file '%s': fclose() failed: %s" msgstr "關閉檔案‘%s’失敗：fclose() 失敗：%s" -#: ../glib/gfileutils.c:1115 +#: glib/gfileutils.c:1115 #, c-format msgid "Existing file '%s' could not be removed: g_unlink() failed: %s" msgstr "現存檔案‘%s’無法移除：g_unlink() 失敗：%s" -#: ../glib/gfileutils.c:1290 +#: glib/gfileutils.c:1290 #, c-format msgid "Template '%s' invalid, should not contain a '%s'" msgstr "樣式‘%s’無效，不應含有‘%s’" # (Abel) this is file template for mktemp/mkstemp -#: ../glib/gfileutils.c:1303 +#: glib/gfileutils.c:1303 #, c-format msgid "Template '%s' doesn't contain XXXXXX" msgstr "檔案樣式‘%s’沒有包含 XXXXXX" -#: ../glib/gfileutils.c:1742 +#: glib/gfileutils.c:1734 +#, c-format +msgid "%u byte" +msgid_plural "%u bytes" +msgstr[0] "%u 位元組" + +#: glib/gfileutils.c:1742 #, c-format msgid "%.1f KB" msgstr "%.1f KB" -#: ../glib/gfileutils.c:1747 +#: glib/gfileutils.c:1747 #, c-format msgid "%.1f MB" msgstr "%.1f MB" -#: ../glib/gfileutils.c:1752 +#: glib/gfileutils.c:1752 #, c-format msgid "%.1f GB" msgstr "%.1f GB" -#: ../glib/gfileutils.c:1795 +#: glib/gfileutils.c:1795 #, c-format msgid "Failed to read the symbolic link '%s': %s" msgstr "讀取符號連結‘%s’失敗：%s" -#: ../glib/gfileutils.c:1816 +#: glib/gfileutils.c:1816 msgid "Symbolic links not supported" msgstr "不支援符號連結" -#: ../glib/giochannel.c:1234 +#: glib/giochannel.c:1234 #, c-format msgid "Could not open converter from '%s' to '%s': %s" msgstr "無法開啟將‘%s’轉換至‘%s’的轉換器：%s" -#: ../glib/giochannel.c:1579 +#: glib/giochannel.c:1579 msgid "Can't do a raw read in g_io_channel_read_line_string" msgstr "在 g_io_channel_read_line_string 中無法讀取原始資料" -#: ../glib/giochannel.c:1626 ../glib/giochannel.c:1884 -#: ../glib/giochannel.c:1971 +#: glib/giochannel.c:1626 glib/giochannel.c:1884 glib/giochannel.c:1971 msgid "Leftover unconverted data in read buffer" msgstr "用來讀取資料的緩衝區中仍有未轉換的資料" -#: ../glib/giochannel.c:1707 ../glib/giochannel.c:1784 +#: glib/giochannel.c:1707 glib/giochannel.c:1784 msgid "Channel terminates in a partial character" msgstr "在字元未完整之前，輸入管道已經結束" -#: ../glib/giochannel.c:1770 +#: glib/giochannel.c:1770 msgid "Can't do a raw read in g_io_channel_read_to_end" msgstr "g_io_channel_read_to_end 中無法讀取原始資料" -#: ../glib/gmappedfile.c:123 +#: glib/gmappedfile.c:123 #, c-format msgid "Failed to open file '%s': open() failed: %s" msgstr "開啟檔案‘%s’失敗：open() 失敗：%s" -#: ../glib/gmappedfile.c:201 +#: glib/gmappedfile.c:201 #, c-format msgid "Failed to map file '%s': mmap() failed: %s" msgstr "對應檔案‘%s’失敗：mmap() 失敗：%s" -#: ../glib/gmarkup.c:303 ../glib/gmarkup.c:343 +#: glib/gmarkup.c:303 glib/gmarkup.c:343 #, c-format msgid "Error on line %d char %d: " msgstr "第 %d 行第 %d 個字發生錯誤：" -#: ../glib/gmarkup.c:363 ../glib/gmarkup.c:441 +#: glib/gmarkup.c:363 glib/gmarkup.c:441 #, c-format msgid "Invalid UTF-8 encoded text in name - not valid '%s'" msgstr "名稱中無效的 UTF-8 編碼文字 - 不是合法的「%s」" -#: ../glib/gmarkup.c:374 +#: glib/gmarkup.c:374 #, c-format msgid "'%s' is not a valid name " msgstr "「%s」不是一個有效的名稱" -#: ../glib/gmarkup.c:390 +#: glib/gmarkup.c:390 #, c-format msgid "'%s' is not a valid name: '%c' " msgstr "「%s」不是一個有效的名稱：「%c」" -#: ../glib/gmarkup.c:494 +#: glib/gmarkup.c:494 #, c-format msgid "Error on line %d: %s" msgstr "第 %d 行發生錯誤：%s" -#: ../glib/gmarkup.c:578 +#: glib/gmarkup.c:578 #, c-format msgid "" "Failed to parse '%-.*s', which should have been a digit inside a character " "reference (ê for example) - perhaps the digit is too large" msgstr "無法解析‘%-.*s’，字元參引內應該含有數字（例如 ê）─ 可能是數字太大" -#: ../glib/gmarkup.c:590 +#: glib/gmarkup.c:590 msgid "" "Character reference did not end with a semicolon; most likely you used an " "ampersand character without intending to start an entity - escape ampersand " @@ -343,22 +348,22 @@ msgstr "" "字元參引的結束部分不是分號；很可能您想使用 & 字元但未將它變為實體 ─ 請將 & 轉" "換為 &" -#: ../glib/gmarkup.c:616 +#: glib/gmarkup.c:616 #, c-format msgid "Character reference '%-.*s' does not encode a permitted character" msgstr "字元參引‘%-.*s’無法表示任何能接受的字元" -#: ../glib/gmarkup.c:654 +#: glib/gmarkup.c:654 msgid "" "Empty entity '&;' seen; valid entities are: & " < > '" msgstr "出現空白的實體‘&;’；可用的實體為：& " < > '" -#: ../glib/gmarkup.c:662 +#: glib/gmarkup.c:662 #, c-format msgid "Entity name '%-.*s' is not known" msgstr "實體名稱 '%-.*s' 意義不明" -#: ../glib/gmarkup.c:667 +#: glib/gmarkup.c:667 msgid "" "Entity did not end with a semicolon; most likely you used an ampersand " "character without intending to start an entity - escape ampersand as &" @@ -366,31 +371,31 @@ msgstr "" "實體的結束部分不是分號；很可能您想使用 & 字元但未將它變為實體 ─ 請將 & 轉換" "為 &" -#: ../glib/gmarkup.c:1014 +#: glib/gmarkup.c:1014 msgid "Document must begin with an element (e.g. <book>)" msgstr "文件開始必須為一元素（例如 <book>）" -#: ../glib/gmarkup.c:1054 +#: glib/gmarkup.c:1054 #, c-format msgid "" "'%s' is not a valid character following a '<' character; it may not begin an " "element name" msgstr "‘<’字元後的‘%s’不是有效的字元；這樣不可能是元素名稱的開始部份" -#: ../glib/gmarkup.c:1122 +#: glib/gmarkup.c:1122 #, c-format msgid "" "Odd character '%s', expected a '>' character to end the empty-element tag '%" "s'" msgstr "字元「%s」只有一半，空元素標籤「%s」的結尾應該以‘>’字元結束" -#: ../glib/gmarkup.c:1206 +#: glib/gmarkup.c:1206 #, c-format msgid "" "Odd character '%s', expected a '=' after attribute name '%s' of element '%s'" msgstr "不尋常的字元‘%s’，屬性名稱‘%s’（屬於元素‘%s’）後應該是‘=’字元" -#: ../glib/gmarkup.c:1247 +#: glib/gmarkup.c:1247 #, c-format msgid "" "Odd character '%s', expected a '>' or '/' character to end the start tag of " @@ -400,7 +405,7 @@ msgstr "" "不尋常的字元‘%s’，元素‘%s’的開始標籤應該以‘>’或‘/’字元終結，也可以是屬性；或" "許您在屬性名稱中使用了無效的字元" -#: ../glib/gmarkup.c:1291 +#: glib/gmarkup.c:1291 #, c-format msgid "" "Odd character '%s', expected an open quote mark after the equals sign when " @@ -408,806 +413,801 @@ msgid "" msgstr "" "不尋常的字元‘%s’，當指定屬性‘%s’的值（屬於元素‘%s’）時，等號後應該出現開引號" -#: ../glib/gmarkup.c:1425 +#: glib/gmarkup.c:1425 #, c-format msgid "" "'%s' is not a valid character following the characters '</'; '%s' may not " "begin an element name" msgstr "‘</’字元後的‘%s’不是有效的字元；‘%s’不可能是元素名稱的開始部份" -#: ../glib/gmarkup.c:1461 +#: glib/gmarkup.c:1461 #, c-format msgid "" "'%s' is not a valid character following the close element name '%s'; the " "allowed character is '>'" msgstr "字元‘%s’是無效的（位置在關閉元素‘%s’末端）；允許的字元為「>」" -#: ../glib/gmarkup.c:1472 +#: glib/gmarkup.c:1472 #, c-format msgid "Element '%s' was closed, no element is currently open" msgstr "元素‘%s’已關閉，沒有開啟中的元素" -#: ../glib/gmarkup.c:1481 +#: glib/gmarkup.c:1481 #, c-format msgid "Element '%s' was closed, but the currently open element is '%s'" msgstr "元素‘%s’已關閉，但開啟中的元素是‘%s’" -#: ../glib/gmarkup.c:1648 +#: glib/gmarkup.c:1648 msgid "Document was empty or contained only whitespace" msgstr "文件完全空白或只含有空白字元" -#: ../glib/gmarkup.c:1662 +#: glib/gmarkup.c:1662 msgid "Document ended unexpectedly just after an open angle bracket '<'" msgstr "文件在尖角括號‘<’後突然終止" -#: ../glib/gmarkup.c:1670 ../glib/gmarkup.c:1715 +#: glib/gmarkup.c:1670 glib/gmarkup.c:1715 #, c-format msgid "" "Document ended unexpectedly with elements still open - '%s' was the last " "element opened" msgstr "在仍然有開啟中的元素時，文件突然結束 ─‘%s’是最後一個開啟的元素" -#: ../glib/gmarkup.c:1678 +#: glib/gmarkup.c:1678 #, c-format msgid "" "Document ended unexpectedly, expected to see a close angle bracket ending " "the tag <%s/>" msgstr "文件突然結束，本來應該出現用來關閉標籤 <%s/> 的尖角括號" -#: ../glib/gmarkup.c:1684 +#: glib/gmarkup.c:1684 msgid "Document ended unexpectedly inside an element name" msgstr "在元素的名稱內，文件突然結束" -#: ../glib/gmarkup.c:1690 +#: glib/gmarkup.c:1690 msgid "Document ended unexpectedly inside an attribute name" msgstr "在屬性名稱內，文件突然結束" -#: ../glib/gmarkup.c:1695 +#: glib/gmarkup.c:1695 msgid "Document ended unexpectedly inside an element-opening tag." msgstr "在元素的開啟標籤內，文件突然結束" -#: ../glib/gmarkup.c:1701 +#: glib/gmarkup.c:1701 msgid "" "Document ended unexpectedly after the equals sign following an attribute " "name; no attribute value" msgstr "在屬性名稱的等號後，文件突然結束；沒有屬性值" -#: ../glib/gmarkup.c:1708 +#: glib/gmarkup.c:1708 msgid "Document ended unexpectedly while inside an attribute value" msgstr "在屬性值內，文件突然結束" -#: ../glib/gmarkup.c:1724 +#: glib/gmarkup.c:1724 #, c-format msgid "Document ended unexpectedly inside the close tag for element '%s'" msgstr "在元素‘%s’的關閉標籤內，文件突然結束" -#: ../glib/gmarkup.c:1730 +#: glib/gmarkup.c:1730 msgid "Document ended unexpectedly inside a comment or processing instruction" msgstr "在註解或處理指示內，文件突然結束" -#: ../glib/gregex.c:131 +#: glib/gregex.c:131 msgid "corrupted object" msgstr "損毀的物件" -#: ../glib/gregex.c:133 +#: glib/gregex.c:133 msgid "internal error or corrupted object" msgstr "內部錯誤或損毀的物件" -#: ../glib/gregex.c:135 +#: glib/gregex.c:135 msgid "out of memory" msgstr "記憶體耗盡" -#: ../glib/gregex.c:140 +#: glib/gregex.c:140 msgid "backtracking limit reached" msgstr "已達回溯上限" -#: ../glib/gregex.c:152 ../glib/gregex.c:160 +#: glib/gregex.c:152 glib/gregex.c:160 msgid "the pattern contains items not supported for partial matching" msgstr "此模式包含了不支援部分比對的項目" -#: ../glib/gregex.c:154 ../gio/glocalfile.c:2105 +#: glib/gregex.c:154 gio/glocalfile.c:2105 msgid "internal error" msgstr "內部的錯誤" -#: ../glib/gregex.c:162 +#: glib/gregex.c:162 msgid "back references as conditions are not supported for partial matching" msgstr "部分比對不支援以反向參照為條件" -#: ../glib/gregex.c:171 +#: glib/gregex.c:171 msgid "recursion limit reached" msgstr "已達遞廻上限" -#: ../glib/gregex.c:173 +#: glib/gregex.c:173 msgid "workspace limit for empty substrings reached" msgstr "已達空白子字串的工作區上限" -#: ../glib/gregex.c:175 +#: glib/gregex.c:175 msgid "invalid combination of newline flags" msgstr "無效的換行旗標組合" -#: ../glib/gregex.c:179 +#: glib/gregex.c:179 msgid "unknown error" msgstr "不明的錯誤" -#: ../glib/gregex.c:199 +#: glib/gregex.c:199 msgid "\\ at end of pattern" msgstr "\\ 於模式結尾" -#: ../glib/gregex.c:202 +#: glib/gregex.c:202 msgid "\\c at end of pattern" msgstr "\\c 於模式結尾" -#: ../glib/gregex.c:205 +#: glib/gregex.c:205 msgid "unrecognized character follows \\" msgstr "無法辨識的字元接著 \\" -#: ../glib/gregex.c:212 +#: glib/gregex.c:212 msgid "case-changing escapes (\\l, \\L, \\u, \\U) are not allowed here" msgstr "這裡不允許使用改變大小寫的轉義符(\\l, \\L, \\u, \\U)" -#: ../glib/gregex.c:215 +#: glib/gregex.c:215 msgid "numbers out of order in {} quantifier" msgstr "{} 裡的數字次序顛倒了" -#: ../glib/gregex.c:218 +#: glib/gregex.c:218 msgid "number too big in {} quantifier" msgstr "{} 裡的數字太大了" -#: ../glib/gregex.c:221 +#: glib/gregex.c:221 msgid "missing terminating ] for character class" msgstr "字元類別缺少結束的 ]" -#: ../glib/gregex.c:224 +#: glib/gregex.c:224 msgid "invalid escape sequence in character class" msgstr "字元類別中無效的跳脫序列" -#: ../glib/gregex.c:227 +#: glib/gregex.c:227 msgid "range out of order in character class" msgstr "字元類別的範圍次序顛倒" -#: ../glib/gregex.c:230 +#: glib/gregex.c:230 msgid "nothing to repeat" msgstr "沒有東西可重複" -#: ../glib/gregex.c:233 +#: glib/gregex.c:233 msgid "unrecognized character after (?" msgstr "在 (? 後有無法辨識的字元" -#: ../glib/gregex.c:237 +#: glib/gregex.c:237 msgid "unrecognized character after (?<" msgstr "在 (?< 後有無法辨識的字元" -#: ../glib/gregex.c:241 +#: glib/gregex.c:241 msgid "unrecognized character after (?P" msgstr "在 (?P 後有無法辨識的字元" -#: ../glib/gregex.c:244 +#: glib/gregex.c:244 msgid "POSIX named classes are supported only within a class" msgstr "POSIX 命名類別只在單一類別中支援" -#: ../glib/gregex.c:247 +#: glib/gregex.c:247 msgid "missing terminating )" msgstr "缺少結束的 )" -#: ../glib/gregex.c:251 +#: glib/gregex.c:251 msgid ") without opening (" msgstr ") 沒有開頭的 (" #. translators: '(?R' and '(?[+-]digits' are both meant as (groups of) #. * sequences here, '(?-54' would be an example for the second group. #. -#: ../glib/gregex.c:258 +#: glib/gregex.c:258 msgid "(?R or (?[+-]digits must be followed by )" msgstr "(?R 或 (?[+-]數字必須接著 )" -#: ../glib/gregex.c:261 +#: glib/gregex.c:261 msgid "reference to non-existent subpattern" msgstr "參照不存在的子模式" -#: ../glib/gregex.c:264 +#: glib/gregex.c:264 msgid "missing ) after comment" msgstr "註解後缺少 )" -#: ../glib/gregex.c:267 +#: glib/gregex.c:267 msgid "regular expression too large" msgstr "正規表示式太長" -#: ../glib/gregex.c:270 +#: glib/gregex.c:270 msgid "failed to get memory" msgstr "取得記憶體失敗" -#: ../glib/gregex.c:273 +#: glib/gregex.c:273 msgid "lookbehind assertion is not fixed length" msgstr "lookbehind 判斷提示(assertion) 不是固定的長度" -#: ../glib/gregex.c:276 +#: glib/gregex.c:276 msgid "malformed number or name after (?(" msgstr "(?( 之後有格式不正確的數字或名稱" -#: ../glib/gregex.c:279 +#: glib/gregex.c:279 msgid "conditional group contains more than two branches" msgstr "條件式群組包含了兩個以上的分支" -#: ../glib/gregex.c:282 +#: glib/gregex.c:282 msgid "assertion expected after (?(" msgstr "(?( 後應該有判斷提示(assertion)" -#: ../glib/gregex.c:285 +#: glib/gregex.c:285 msgid "unknown POSIX class name" msgstr "未知的 POSIX 類別名稱" -#: ../glib/gregex.c:288 +#: glib/gregex.c:288 msgid "POSIX collating elements are not supported" msgstr "不支援 POSIX 整理元件" -#: ../glib/gregex.c:291 +#: glib/gregex.c:291 msgid "character value in \\x{...} sequence is too large" msgstr "\\x{...} 序列中的字元值太大" -#: ../glib/gregex.c:294 +#: glib/gregex.c:294 msgid "invalid condition (?(0)" msgstr "無效的條件 (?(0)" -#: ../glib/gregex.c:297 +#: glib/gregex.c:297 msgid "\\C not allowed in lookbehind assertion" msgstr "在 lookbehind 判斷提示(assertion) 中不支援\\C" -#: ../glib/gregex.c:300 +#: glib/gregex.c:300 msgid "recursive call could loop indefinitely" msgstr "遞廻呼叫可能變成無限廻圈" -#: ../glib/gregex.c:303 +#: glib/gregex.c:303 msgid "missing terminator in subpattern name" msgstr "子模式名稱中缺少結束字元" -#: ../glib/gregex.c:306 +#: glib/gregex.c:306 msgid "two named subpatterns have the same name" msgstr "兩個命名的子模式具有相同的名稱" -#: ../glib/gregex.c:309 +#: glib/gregex.c:309 msgid "malformed \\P or \\p sequence" msgstr "格式不正確的 \\P 或 \\p 序列" -#: ../glib/gregex.c:312 +#: glib/gregex.c:312 msgid "unknown property name after \\P or \\p" msgstr "在 \\P 或 \\p 後有未知的屬性名稱" -#: ../glib/gregex.c:315 +#: glib/gregex.c:315 msgid "subpattern name is too long (maximum 32 characters)" msgstr "子模式名稱太長（最多 32 字元）" -#: ../glib/gregex.c:318 +#: glib/gregex.c:318 msgid "too many named subpatterns (maximum 10,000)" msgstr "太多命名的子模式（最大值 10,000）" -#: ../glib/gregex.c:321 +#: glib/gregex.c:321 msgid "octal value is greater than \\377" msgstr "8 進位值大於 \\377" -#: ../glib/gregex.c:324 +#: glib/gregex.c:324 msgid "DEFINE group contains more than one branch" msgstr "DEFINE 群組包含一個以上的分支" -#: ../glib/gregex.c:327 +#: glib/gregex.c:327 msgid "repeating a DEFINE group is not allowed" msgstr "不允許重複 DEFINE 群組" -#: ../glib/gregex.c:330 +#: glib/gregex.c:330 msgid "inconsistent NEWLINE options" msgstr "不一致的 NEWLINE 選項" -#: ../glib/gregex.c:333 +#: glib/gregex.c:333 msgid "" "\\g is not followed by a braced name or an optionally braced non-zero number" msgstr "\\g 並未隨著具有大括弧的名稱或選用的具大括弧的非零數值" -#: ../glib/gregex.c:338 +#: glib/gregex.c:338 msgid "unexpected repeat" msgstr "未預期的重複" -#: ../glib/gregex.c:342 +#: glib/gregex.c:342 msgid "code overflow" msgstr "程式碼溢流" -#: ../glib/gregex.c:346 +#: glib/gregex.c:346 msgid "overran compiling workspace" msgstr "編譯工作區超出範圍" -#: ../glib/gregex.c:350 +#: glib/gregex.c:350 msgid "previously-checked referenced subpattern not found" msgstr "找不到預先核取的參照子字串" -#: ../glib/gregex.c:526 ../glib/gregex.c:1607 +#: glib/gregex.c:526 glib/gregex.c:1607 #, c-format msgid "Error while matching regular expression %s: %s" msgstr "比對正規表示式 %s 發生錯誤：%s" -#: ../glib/gregex.c:1098 +#: glib/gregex.c:1098 msgid "PCRE library is compiled without UTF8 support" msgstr "PCRE 程式庫並未編譯對 UTF8 的支援" -#: ../glib/gregex.c:1107 +#: glib/gregex.c:1107 msgid "PCRE library is compiled without UTF8 properties support" msgstr "PCRE 程式庫並未編譯對 UTF8 屬性的支援" -#: ../glib/gregex.c:1161 +#: glib/gregex.c:1161 #, c-format msgid "Error while compiling regular expression %s at char %d: %s" msgstr "編譯正規表示式 %s 時於第 %d 個字發生錯誤：%s" -#: ../glib/gregex.c:1197 +#: glib/gregex.c:1197 #, c-format msgid "Error while optimizing regular expression %s: %s" msgstr "最佳化正規表示式 %s 時發生錯誤：%s" -#: ../glib/gregex.c:2035 +#: glib/gregex.c:2035 msgid "hexadecimal digit or '}' expected" msgstr "應為 16 進位數字或「}」" -#: ../glib/gregex.c:2051 +#: glib/gregex.c:2051 msgid "hexadecimal digit expected" msgstr "應為 16 進位數字" -#: ../glib/gregex.c:2091 +#: glib/gregex.c:2091 msgid "missing '<' in symbolic reference" msgstr "在符號參照中缺少「<」" -#: ../glib/gregex.c:2100 +#: glib/gregex.c:2100 msgid "unfinished symbolic reference" msgstr "未完成的符號參照" -#: ../glib/gregex.c:2107 +#: glib/gregex.c:2107 msgid "zero-length symbolic reference" msgstr "零-長度的符號參照" -#: ../glib/gregex.c:2118 +#: glib/gregex.c:2118 msgid "digit expected" msgstr "預期數字" -#: ../glib/gregex.c:2136 +#: glib/gregex.c:2136 msgid "illegal symbolic reference" msgstr "不合法的符號參照" -#: ../glib/gregex.c:2198 +#: glib/gregex.c:2198 msgid "stray final '\\'" msgstr "缺少最後的「\\」" -#: ../glib/gregex.c:2202 +#: glib/gregex.c:2202 msgid "unknown escape sequence" msgstr "不明的跳脫序列" -#: ../glib/gregex.c:2212 +#: glib/gregex.c:2212 #, c-format msgid "Error while parsing replacement text \"%s\" at char %lu: %s" msgstr "當分析於字元 %2$lu 的取代文字「%1$s」時發生錯誤：%3$s" -#: ../glib/gshell.c:70 +#: glib/gshell.c:70 msgid "Quoted text doesn't begin with a quotation mark" msgstr "應該用引號括起來的文字不是以括號為開始" -#: ../glib/gshell.c:160 +#: glib/gshell.c:160 msgid "Unmatched quotation mark in command line or other shell-quoted text" msgstr "指令列或其它標為指令的字串內有不對稱的引號" -#: ../glib/gshell.c:538 +#: glib/gshell.c:538 #, c-format msgid "Text ended just after a '\\' character. (The text was '%s')" msgstr "文字在‘\\’字元後就終止了。（文字為‘%s’）" -#: ../glib/gshell.c:545 +#: glib/gshell.c:545 #, c-format msgid "Text ended before matching quote was found for %c. (The text was '%s')" msgstr "字串完結前仍沒有對應於 %c 的引號（字串為‘%s’）" -#: ../glib/gshell.c:557 +#: glib/gshell.c:557 msgid "Text was empty (or contained only whitespace)" msgstr "文字是空白的（或只含有空白字元）" -#: ../glib/gspawn-win32.c:283 +#: glib/gspawn-win32.c:283 msgid "Failed to read data from child process" msgstr "無法從副進程讀取資料" -#: ../glib/gspawn-win32.c:298 ../glib/gspawn.c:1469 +#: glib/gspawn-win32.c:298 glib/gspawn.c:1469 #, c-format msgid "Failed to create pipe for communicating with child process (%s)" msgstr "無法建立管道來和副進程溝通 (%s)" -#: ../glib/gspawn-win32.c:336 ../glib/gspawn-win32.c:344 ../glib/gspawn.c:1132 +#: glib/gspawn-win32.c:336 glib/gspawn-win32.c:344 glib/gspawn.c:1132 #, c-format msgid "Failed to read from child pipe (%s)" msgstr "無法從管道讀取資料 (%s)" -#: ../glib/gspawn-win32.c:367 ../glib/gspawn.c:1337 +#: glib/gspawn-win32.c:367 glib/gspawn.c:1337 #, c-format msgid "Failed to change to directory '%s' (%s)" msgstr "無法進入目錄‘%s’(%s)" -#: ../glib/gspawn-win32.c:373 ../glib/gspawn-win32.c:492 +#: glib/gspawn-win32.c:373 glib/gspawn-win32.c:492 #, c-format msgid "Failed to execute child process (%s)" msgstr "無法執行副進程 (%s)" -#: ../glib/gspawn-win32.c:442 +#: glib/gspawn-win32.c:442 #, c-format msgid "Invalid program name: %s" msgstr "程式名稱無效：%s" -#: ../glib/gspawn-win32.c:452 ../glib/gspawn-win32.c:720 -#: ../glib/gspawn-win32.c:1276 +#: glib/gspawn-win32.c:452 glib/gspawn-win32.c:720 glib/gspawn-win32.c:1276 #, c-format msgid "Invalid string in argument vector at %d: %s" msgstr "第 %d 個引數中含無效的字串：%s" -#: ../glib/gspawn-win32.c:463 ../glib/gspawn-win32.c:735 -#: ../glib/gspawn-win32.c:1309 +#: glib/gspawn-win32.c:463 glib/gspawn-win32.c:735 glib/gspawn-win32.c:1309 #, c-format msgid "Invalid string in environment: %s" msgstr "環境變數中的字串無效：%s" -#: ../glib/gspawn-win32.c:716 ../glib/gspawn-win32.c:1257 +#: glib/gspawn-win32.c:716 glib/gspawn-win32.c:1257 #, c-format msgid "Invalid working directory: %s" msgstr "無效的工作目錄：%s" -#: ../glib/gspawn-win32.c:781 +#: glib/gspawn-win32.c:781 #, c-format msgid "Failed to execute helper program (%s)" msgstr "無法執行協助程式 (%s)" -#: ../glib/gspawn-win32.c:995 +#: glib/gspawn-win32.c:995 msgid "" "Unexpected error in g_io_channel_win32_poll() reading data from a child " "process" msgstr "當 g_io_channel_win32_poll() 從副進程讀取資料時發生無法預計的錯誤" -#: ../glib/gspawn.c:188 +#: glib/gspawn.c:188 #, c-format msgid "Failed to read data from child process (%s)" msgstr "無法從副進程讀取資料 (%s)" -#: ../glib/gspawn.c:325 +#: glib/gspawn.c:325 #, c-format msgid "Unexpected error in select() reading data from a child process (%s)" msgstr "當 select() 從子程序讀取資料時發生未預期的錯誤 (%s)" -#: ../glib/gspawn.c:408 +#: glib/gspawn.c:408 #, c-format msgid "Unexpected error in waitpid() (%s)" msgstr "waitpid() 發生未預期的錯誤 (%s)" -#: ../glib/gspawn.c:1197 +#: glib/gspawn.c:1197 #, c-format msgid "Failed to fork (%s)" msgstr "無法衍生進程 (%s)" -#: ../glib/gspawn.c:1347 +#: glib/gspawn.c:1347 #, c-format msgid "Failed to execute child process \"%s\" (%s)" msgstr "無法執行副進程“%s”(%s)" -#: ../glib/gspawn.c:1357 +#: glib/gspawn.c:1357 #, c-format msgid "Failed to redirect output or input of child process (%s)" msgstr "無法將副進程的輸出或輸入重新導向 (%s)" -#: ../glib/gspawn.c:1366 +#: glib/gspawn.c:1366 #, c-format msgid "Failed to fork child process (%s)" msgstr "無法衍生副進程 (%s)" -#: ../glib/gspawn.c:1374 +#: glib/gspawn.c:1374 #, c-format msgid "Unknown error executing child process \"%s\"" msgstr "執行副進程“%s”時發生不明的錯誤" -#: ../glib/gspawn.c:1396 +#: glib/gspawn.c:1396 #, c-format msgid "Failed to read enough data from child pid pipe (%s)" msgstr "無法從 child pid pipe 讀取足夠的資料 (%s)" -#: ../glib/gutf8.c:1038 +#: glib/gutf8.c:1038 msgid "Character out of range for UTF-8" msgstr "字元不在 UTF-8 範圍之內" -#: ../glib/gutf8.c:1132 ../glib/gutf8.c:1141 ../glib/gutf8.c:1273 -#: ../glib/gutf8.c:1282 ../glib/gutf8.c:1423 ../glib/gutf8.c:1519 +#: glib/gutf8.c:1132 glib/gutf8.c:1141 glib/gutf8.c:1273 glib/gutf8.c:1282 +#: glib/gutf8.c:1423 glib/gutf8.c:1519 msgid "Invalid sequence in conversion input" msgstr "轉換輸入資料時出現無效的字元次序" -#: ../glib/gutf8.c:1434 ../glib/gutf8.c:1530 +#: glib/gutf8.c:1434 glib/gutf8.c:1530 msgid "Character out of range for UTF-16" msgstr "字元不在 UTF-16 範圍之內" -#: ../glib/goption.c:755 +#: glib/goption.c:755 msgid "Usage:" msgstr "用法：" -#: ../glib/goption.c:755 +#: glib/goption.c:755 msgid "[OPTION...]" msgstr "[選項...]" -#: ../glib/goption.c:861 +#: glib/goption.c:861 msgid "Help Options:" msgstr "說明選項：" -#: ../glib/goption.c:862 +#: glib/goption.c:862 msgid "Show help options" msgstr "顯示說明的選項" -#: ../glib/goption.c:868 +#: glib/goption.c:868 msgid "Show all help options" msgstr "顯示所有的說明選項" -#: ../glib/goption.c:930 +#: glib/goption.c:930 msgid "Application Options:" msgstr "應用程式選項：" -#: ../glib/goption.c:992 ../glib/goption.c:1062 +#: glib/goption.c:992 glib/goption.c:1062 #, c-format msgid "Cannot parse integer value '%s' for %s" msgstr "無法給 %2$s 解析整數值‘%1$s’" -#: ../glib/goption.c:1002 ../glib/goption.c:1070 +#: glib/goption.c:1002 glib/goption.c:1070 #, c-format msgid "Integer value '%s' for %s out of range" msgstr "%2$s 的整數值‘%1$s’超出範圍" -#: ../glib/goption.c:1027 +#: glib/goption.c:1027 #, c-format msgid "Cannot parse double value '%s' for %s" msgstr "無法給 %2$s 解析雙精度浮點數‘%1$s’" -#: ../glib/goption.c:1035 +#: glib/goption.c:1035 #, c-format msgid "Double value '%s' for %s out of range" msgstr "%2$s 的雙精度浮點數‘%1$s’超出範圍" -#: ../glib/goption.c:1298 ../glib/goption.c:1377 +#: glib/goption.c:1298 glib/goption.c:1377 #, c-format msgid "Error parsing option %s" msgstr "解析 %s 選項時發生錯誤" -#: ../glib/goption.c:1408 ../glib/goption.c:1522 +#: glib/goption.c:1408 glib/goption.c:1522 #, c-format msgid "Missing argument for %s" msgstr "缺少 %s 的參數" -#: ../glib/goption.c:1917 +#: glib/goption.c:1917 #, c-format msgid "Unknown option %s" msgstr "未知的選項 %s" -#: ../glib/gkeyfile.c:362 +#: glib/gkeyfile.c:362 msgid "Valid key file could not be found in search dirs" msgstr "在資料目錄中找不到有效的設定鍵檔案" -#: ../glib/gkeyfile.c:397 +#: glib/gkeyfile.c:397 msgid "Not a regular file" msgstr "不是正規的檔案" -#: ../glib/gkeyfile.c:405 +#: glib/gkeyfile.c:405 msgid "File is empty" msgstr "檔案是空白的" -#: ../glib/gkeyfile.c:765 +#: glib/gkeyfile.c:765 #, c-format msgid "" "Key file contains line '%s' which is not a key-value pair, group, or comment" msgstr "設定鍵檔案中‘%s’行並非設定鍵值配對、群組或註解" -#: ../glib/gkeyfile.c:825 +#: glib/gkeyfile.c:825 #, c-format msgid "Invalid group name: %s" msgstr "無效的群組名稱：%s" -#: ../glib/gkeyfile.c:847 +#: glib/gkeyfile.c:847 msgid "Key file does not start with a group" msgstr "設定鍵檔案並非以群組開頭" -#: ../glib/gkeyfile.c:873 +#: glib/gkeyfile.c:873 #, c-format msgid "Invalid key name: %s" msgstr "無效的設定鍵名稱：%s" -#: ../glib/gkeyfile.c:900 +#: glib/gkeyfile.c:900 #, c-format msgid "Key file contains unsupported encoding '%s'" msgstr "設定鍵檔案包含不支援的編碼‘%s’" -#: ../glib/gkeyfile.c:1116 ../glib/gkeyfile.c:1278 ../glib/gkeyfile.c:2507 -#: ../glib/gkeyfile.c:2573 ../glib/gkeyfile.c:2708 ../glib/gkeyfile.c:2841 -#: ../glib/gkeyfile.c:2994 ../glib/gkeyfile.c:3181 ../glib/gkeyfile.c:3242 +#: glib/gkeyfile.c:1116 glib/gkeyfile.c:1278 glib/gkeyfile.c:2507 +#: glib/gkeyfile.c:2573 glib/gkeyfile.c:2708 glib/gkeyfile.c:2841 +#: glib/gkeyfile.c:2994 glib/gkeyfile.c:3181 glib/gkeyfile.c:3242 #, c-format msgid "Key file does not have group '%s'" msgstr "設定鍵檔案沒有群組‘%s’" -#: ../glib/gkeyfile.c:1290 +#: glib/gkeyfile.c:1290 #, c-format msgid "Key file does not have key '%s'" msgstr "設定鍵檔案沒有設定鍵‘%s’" -#: ../glib/gkeyfile.c:1397 ../glib/gkeyfile.c:1512 +#: glib/gkeyfile.c:1397 glib/gkeyfile.c:1512 #, c-format msgid "Key file contains key '%s' with value '%s' which is not UTF-8" msgstr "設定鍵檔案包含的設定鍵‘%s’（數值為‘%s’）並非 UTF-8" -#: ../glib/gkeyfile.c:1417 ../glib/gkeyfile.c:1911 +#: glib/gkeyfile.c:1417 glib/gkeyfile.c:1911 #, c-format msgid "Key file contains key '%s' which has value that cannot be interpreted." msgstr "設定鍵檔案包含的設定鍵‘%s’的數值無法解譯。" -#: ../glib/gkeyfile.c:1532 +#: glib/gkeyfile.c:1532 #, c-format msgid "" "Key file contains key '%s' which has a value that cannot be interpreted." msgstr "設定鍵檔案包含的設定鍵「%s」的數值無法解譯。" -#: ../glib/gkeyfile.c:2126 ../glib/gkeyfile.c:2338 +#: glib/gkeyfile.c:2126 glib/gkeyfile.c:2338 #, c-format msgid "" "Key file contains key '%s' in group '%s' which has value that cannot be " "interpreted." msgstr "設定鍵檔案包含的群組‘%2$s’中設定鍵‘%1$s’數值無法解譯" -#: ../glib/gkeyfile.c:2522 ../glib/gkeyfile.c:2723 ../glib/gkeyfile.c:3253 +#: glib/gkeyfile.c:2522 glib/gkeyfile.c:2723 glib/gkeyfile.c:3253 #, c-format msgid "Key file does not have key '%s' in group '%s'" msgstr "設定鍵檔案的群組‘%2$s’中沒有設定鍵‘%1$s’" -#: ../glib/gkeyfile.c:3487 +#: glib/gkeyfile.c:3487 msgid "Key file contains escape character at end of line" msgstr "設定鍵檔案在行尾包含跳出字元" -#: ../glib/gkeyfile.c:3509 +#: glib/gkeyfile.c:3509 #, c-format msgid "Key file contains invalid escape sequence '%s'" msgstr "設定鍵檔案含有不正確的「跳出字元」‘%s’" -#: ../glib/gkeyfile.c:3651 +#: glib/gkeyfile.c:3651 #, c-format msgid "Value '%s' cannot be interpreted as a number." msgstr "數值‘%s’不能被解譯為數字。" -#: ../glib/gkeyfile.c:3665 +#: glib/gkeyfile.c:3665 #, c-format msgid "Integer value '%s' out of range" msgstr "整數值‘%s’超出範圍" -#: ../glib/gkeyfile.c:3698 +#: glib/gkeyfile.c:3698 #, c-format msgid "Value '%s' cannot be interpreted as a float number." msgstr "數值‘%s’不能被解譯為浮點數。" -#: ../glib/gkeyfile.c:3722 +#: glib/gkeyfile.c:3722 #, c-format msgid "Value '%s' cannot be interpreted as a boolean." msgstr "數值‘%s’不能被解譯為邏輯值。" -#: ../gio/gbufferedinputstream.c:417 ../gio/gbufferedinputstream.c:498 -#: ../gio/ginputstream.c:190 ../gio/ginputstream.c:322 -#: ../gio/ginputstream.c:563 ../gio/ginputstream.c:688 -#: ../gio/goutputstream.c:201 ../gio/goutputstream.c:656 +#: gio/gbufferedinputstream.c:417 gio/gbufferedinputstream.c:498 +#: gio/ginputstream.c:190 gio/ginputstream.c:322 gio/ginputstream.c:563 +#: gio/ginputstream.c:688 gio/goutputstream.c:201 gio/goutputstream.c:656 #, c-format msgid "Too large count value passed to %s" msgstr "傳給 %s 的計數值太大" -#: ../gio/gbufferedinputstream.c:885 ../gio/ginputstream.c:898 -#: ../gio/goutputstream.c:1085 +#: gio/gbufferedinputstream.c:885 gio/ginputstream.c:898 gio/giostream.c:309 +#: gio/goutputstream.c:1085 msgid "Stream is already closed" msgstr "串流已經關閉" -#: ../gio/gcancellable.c:404 ../gio/glocalfile.c:2098 -#: ../gio/gsimpleasyncresult.c:650 ../gio/gsimpleasyncresult.c:676 +#: gio/gcancellable.c:404 gio/glocalfile.c:2098 gio/gsimpleasyncresult.c:650 +#: gio/gsimpleasyncresult.c:676 msgid "Operation was cancelled" msgstr "操作已被取消" -#: ../gio/gcontenttype.c:180 +#: gio/gcontenttype.c:180 msgid "Unknown type" msgstr "不明的類型" -#: ../gio/gcontenttype.c:181 +#: gio/gcontenttype.c:181 #, c-format msgid "%s filetype" msgstr "%s 檔案類型" -#: ../gio/gcontenttype.c:678 +#: gio/gcontenttype.c:678 #, c-format msgid "%s type" msgstr "%s 類型" -#: ../gio/gdatainputstream.c:313 +#: gio/gdatainputstream.c:313 msgid "Unexpected early end-of-stream" msgstr "未預期的串流過早結束" -#: ../gio/gdesktopappinfo.c:463 ../gio/gwin32appinfo.c:222 +#: gio/gdesktopappinfo.c:463 gio/gwin32appinfo.c:222 msgid "Unnamed" msgstr "未命名的" -#: ../gio/gdesktopappinfo.c:710 +#: gio/gdesktopappinfo.c:710 msgid "Desktop file didn't specify Exec field" msgstr "桌面(Desktop)檔案未指定 Exec 欄位" -#: ../gio/gdesktopappinfo.c:890 +#: gio/gdesktopappinfo.c:890 msgid "Unable to find terminal required for application" msgstr "無法找到應用程式要求的終端機" -#: ../gio/gdesktopappinfo.c:1098 +#: gio/gdesktopappinfo.c:1098 #, c-format msgid "Can't create user application configuration folder %s: %s" msgstr "不能建立使用者應用程式組態資料夾 %s：%s" -#: ../gio/gdesktopappinfo.c:1102 +#: gio/gdesktopappinfo.c:1102 #, c-format msgid "Can't create user MIME configuration folder %s: %s" msgstr "不能建立使用者 MIME 組態資料夾 %s：%s" -#: ../gio/gdesktopappinfo.c:1506 +#: gio/gdesktopappinfo.c:1506 #, c-format msgid "Can't create user desktop file %s" msgstr "不能建立使用者桌面檔案 %s" -#: ../gio/gdesktopappinfo.c:1618 +#: gio/gdesktopappinfo.c:1618 #, c-format msgid "Custom definition for %s" msgstr "自訂 %s 的定義" -#: ../gio/gdrive.c:409 +#: gio/gdrive.c:409 msgid "drive doesn't implement eject" msgstr "裝置無法實作退出功能(eject)" #. Translators: This is an error #. * message for drive objects that #. * don't implement any of eject or eject_with_operation. -#: ../gio/gdrive.c:489 +#: gio/gdrive.c:489 msgid "drive doesn't implement eject or eject_with_operation" msgstr "裝置無法實作退出功能(eject) 或 eject_with_operation" -#: ../gio/gdrive.c:566 +#: gio/gdrive.c:566 msgid "drive doesn't implement polling for media" msgstr "裝置無法實作媒體的輪詢" -#: ../gio/gdrive.c:771 +#: gio/gdrive.c:771 msgid "drive doesn't implement start" msgstr "裝置無法實作啟動功能(start)" -#: ../gio/gdrive.c:873 +#: gio/gdrive.c:873 msgid "drive doesn't implement stop" msgstr "裝置無法實作停止功能(stop)" -#: ../gio/gemblem.c:325 +#: gio/gemblem.c:325 #, c-format msgid "Can't handle version %d of GEmblem encoding" msgstr "不能處理版本為 %d 的 GEmblem 編碼" -#: ../gio/gemblem.c:335 +#: gio/gemblem.c:335 #, c-format msgid "Malformed number of tokens (%d) in GEmblem encoding" msgstr "GEmblem 編碼中記號 (%d) 的數量格式不正確" -#: ../gio/gemblemedicon.c:296 +#: gio/gemblemedicon.c:296 #, c-format msgid "Can't handle version %d of GEmblemedIcon encoding" msgstr "不能處理版本為 %d 的 GEmblemedIcon 編碼" -#: ../gio/gemblemedicon.c:306 +#: gio/gemblemedicon.c:306 #, c-format msgid "Malformed number of tokens (%d) in GEmblemedIcon encoding" msgstr "GEmblemedIcon 編碼中記號 (%d) 的數量格式不正確" -#: ../gio/gemblemedicon.c:329 +#: gio/gemblemedicon.c:329 msgid "Expected a GEmblem for GEmblemedIcon" msgstr "預期為 GEmblemedIcon 的 GEmblem" -#: ../gio/gfile.c:861 ../gio/gfile.c:1091 ../gio/gfile.c:1226 -#: ../gio/gfile.c:1462 ../gio/gfile.c:1516 ../gio/gfile.c:1573 -#: ../gio/gfile.c:1656 ../gio/gfile.c:1711 ../gio/gfile.c:1771 -#: ../gio/gfile.c:1825 ../gio/gfile.c:3150 ../gio/gfile.c:3204 -#: ../gio/gfile.c:3335 ../gio/gfile.c:3375 ../gio/gfile.c:3702 -#: ../gio/gfile.c:4104 ../gio/gfile.c:4190 ../gio/gfile.c:4279 -#: ../gio/gfile.c:4377 ../gio/gfile.c:4464 ../gio/gfile.c:4557 -#: ../gio/gfile.c:4887 ../gio/gfile.c:5167 ../gio/gfile.c:5236 -#: ../gio/gfile.c:6824 ../gio/gfile.c:6914 ../gio/gfile.c:7000 -#: ../gio/win32/gwinhttpfile.c:431 +#: gio/gfile.c:861 gio/gfile.c:1091 gio/gfile.c:1226 gio/gfile.c:1462 +#: gio/gfile.c:1516 gio/gfile.c:1573 gio/gfile.c:1656 gio/gfile.c:1711 +#: gio/gfile.c:1771 gio/gfile.c:1825 gio/gfile.c:3150 gio/gfile.c:3204 +#: gio/gfile.c:3335 gio/gfile.c:3375 gio/gfile.c:3702 gio/gfile.c:4104 +#: gio/gfile.c:4190 gio/gfile.c:4279 gio/gfile.c:4377 gio/gfile.c:4464 +#: gio/gfile.c:4557 gio/gfile.c:4887 gio/gfile.c:5167 gio/gfile.c:5236 +#: gio/gfile.c:6824 gio/gfile.c:6914 gio/gfile.c:7000 +#: gio/win32/gwinhttpfile.c:431 msgid "Operation not supported" msgstr "不支援的操作" @@ -1219,126 +1219,128 @@ msgstr "不支援的操作" #. Translators: This is an error message when trying to find #. * the enclosing (user visible) mount of a file, but none #. * exists. -#: ../gio/gfile.c:1347 ../gio/glocalfile.c:1065 ../gio/glocalfile.c:1076 -#: ../gio/glocalfile.c:1089 +#: gio/gfile.c:1347 gio/glocalfile.c:1065 gio/glocalfile.c:1076 +#: gio/glocalfile.c:1089 msgid "Containing mount does not exist" msgstr "包含了不存在的掛載點" -#: ../gio/gfile.c:2399 ../gio/glocalfile.c:2250 +#: gio/gfile.c:2399 gio/glocalfile.c:2250 msgid "Can't copy over directory" msgstr "不能複製整個目錄" -#: ../gio/gfile.c:2459 +#: gio/gfile.c:2459 msgid "Can't copy directory over directory" msgstr "不能將目錄複製到目錄上" -#: ../gio/gfile.c:2467 ../gio/glocalfile.c:2259 +#: gio/gfile.c:2467 gio/glocalfile.c:2259 msgid "Target file exists" msgstr "目標檔案已存在" -#: ../gio/gfile.c:2485 +#: gio/gfile.c:2485 msgid "Can't recursively copy directory" msgstr "不能遞廻複製目錄" -#: ../gio/gfile.c:2784 +#: gio/gfile.c:2784 msgid "Can't copy special file" msgstr "不能複製特殊的檔案" -#: ../gio/gfile.c:3325 +#: gio/gfile.c:3325 msgid "Invalid symlink value given" msgstr "提供了無效的符號連結值" -#: ../gio/gfile.c:3418 +#: gio/gfile.c:3418 msgid "Trash not supported" msgstr "不支援回收筒" -#: ../gio/gfile.c:3467 +#: gio/gfile.c:3467 #, c-format msgid "File names cannot contain '%c'" msgstr "檔案名稱不能包含「%c」" -#: ../gio/gfile.c:5884 ../gio/gvolume.c:376 +#: gio/gfile.c:5884 gio/gvolume.c:376 msgid "volume doesn't implement mount" msgstr "儲存區尚未實作掛載功能" -#: ../gio/gfile.c:5992 +#: gio/gfile.c:5992 msgid "No application is registered as handling this file" msgstr "沒有應用程式註冊為用以處理這個檔案" -#: ../gio/gfileenumerator.c:206 +#: gio/gfileenumerator.c:206 msgid "Enumerator is closed" msgstr "檔案列舉器(enumerator)已關閉" -#: ../gio/gfileenumerator.c:213 ../gio/gfileenumerator.c:272 -#: ../gio/gfileenumerator.c:372 ../gio/gfileenumerator.c:481 +#: gio/gfileenumerator.c:213 gio/gfileenumerator.c:272 +#: gio/gfileenumerator.c:372 gio/gfileenumerator.c:481 msgid "File enumerator has outstanding operation" msgstr "檔案列舉器(enumerator)有異常操作" -#: ../gio/gfileenumerator.c:362 ../gio/gfileenumerator.c:471 +#: gio/gfileenumerator.c:362 gio/gfileenumerator.c:471 msgid "File enumerator is already closed" msgstr "檔案列舉器(enumerator)已經關閉" -#: ../gio/gfileicon.c:237 +#: gio/gfileicon.c:237 #, c-format msgid "Can't handle version %d of GFileIcon encoding" msgstr "不能處理版本為 %d 的 GFileIcon 編碼" -#: ../gio/gfileicon.c:247 +#: gio/gfileicon.c:247 msgid "Malformed input data for GFileIcon" msgstr "給 GFileIcon 的輸入資料格式不良" -#: ../gio/gfileinputstream.c:155 ../gio/gfileinputstream.c:422 -#: ../gio/gfileoutputstream.c:170 ../gio/gfileoutputstream.c:525 +#: gio/gfileinputstream.c:155 gio/gfileinputstream.c:422 +#: gio/gfileiostream.c:171 gio/gfileoutputstream.c:170 +#: gio/gfileoutputstream.c:525 msgid "Stream doesn't support query_info" msgstr "串流不支援 query_info" -#: ../gio/gfileinputstream.c:337 ../gio/gfileoutputstream.c:383 +#: gio/gfileinputstream.c:337 gio/gfileiostream.c:389 +#: gio/gfileoutputstream.c:383 msgid "Seek not supported on stream" msgstr "不支援在串流中搜尋" -#: ../gio/gfileinputstream.c:381 +#: gio/gfileinputstream.c:381 msgid "Truncate not allowed on input stream" msgstr "在輸入串流中不允許截短(truncate)" -#: ../gio/gfileoutputstream.c:459 +#: gio/gfileiostream.c:465 gio/gfileoutputstream.c:459 msgid "Truncate not supported on stream" msgstr "在串流中不支援截短(truncate)" -#: ../gio/gicon.c:324 +#: gio/gicon.c:324 #, c-format msgid "Wrong number of tokens (%d)" msgstr "記號數量 (%d) 錯誤" -#: ../gio/gicon.c:344 +#: gio/gicon.c:344 #, c-format msgid "No type for class name %s" msgstr "類別名稱 %s 沒有類型" -#: ../gio/gicon.c:354 +#: gio/gicon.c:354 #, c-format msgid "Type %s does not implement the GIcon interface" msgstr "類型 %s 沒有實作 GIcon 介面" -#: ../gio/gicon.c:365 +#: gio/gicon.c:365 #, c-format msgid "Type %s is not classed" msgstr "類型 %s 尚未歸類" -#: ../gio/gicon.c:379 +#: gio/gicon.c:379 #, c-format msgid "Malformed version number: %s" msgstr "格式不良的版本號碼：%s" -#: ../gio/gicon.c:393 +#: gio/gicon.c:393 #, c-format msgid "Type %s does not implement from_tokens() on the GIcon interface" msgstr "類型 %s 沒有實作 GIcon 介面的 from_tokens()" -#: ../gio/gicon.c:469 +#: gio/gicon.c:469 msgid "Can't handle the supplied version the icon encoding" msgstr "不能處理提供的圖示編碼版本" -#: ../gio/ginputstream.c:199 +#: gio/ginputstream.c:199 msgid "Input stream doesn't implement read" msgstr "輸入串流尚未實作讀取" @@ -1348,438 +1350,622 @@ msgstr "輸入串流尚未實作讀取" #. Translators: This is an error you get if there is #. * already an operation running against this stream when #. * you try to start one -#: ../gio/ginputstream.c:908 ../gio/goutputstream.c:1095 +#: gio/ginputstream.c:908 gio/giostream.c:319 gio/goutputstream.c:1095 msgid "Stream has outstanding operation" msgstr "串流有異常操作" -#: ../gio/glocaldirectorymonitor.c:295 +#: gio/ginetsocketaddress.c:182 gio/ginetsocketaddress.c:199 +#: gio/gunixsocketaddress.c:174 +msgid "Not enough space for socket address" +msgstr "" + +#: gio/ginetsocketaddress.c:212 +msgid "Unsupported socket address" +msgstr "" + +#: gio/glocaldirectorymonitor.c:295 msgid "Unable to find default local directory monitor type" msgstr "無法找到預設的本地端目錄監視器類型" -#: ../gio/glocalfile.c:600 ../gio/win32/gwinhttpfile.c:414 +#: gio/glocalfile.c:600 gio/win32/gwinhttpfile.c:414 #, c-format msgid "Invalid filename %s" msgstr "無效的檔案名稱 %s" -#: ../gio/glocalfile.c:973 +#: gio/glocalfile.c:973 #, c-format msgid "Error getting filesystem info: %s" msgstr "取得檔案系統資訊時發生錯誤：%s" -#: ../gio/glocalfile.c:1109 +#: gio/glocalfile.c:1109 msgid "Can't rename root directory" msgstr "不能重新命名根目錄" -#: ../gio/glocalfile.c:1129 ../gio/glocalfile.c:1155 +#: gio/glocalfile.c:1129 gio/glocalfile.c:1155 #, c-format msgid "Error renaming file: %s" msgstr "重新命名檔案時發生錯誤：%s" -#: ../gio/glocalfile.c:1138 +#: gio/glocalfile.c:1138 msgid "Can't rename file, filename already exist" msgstr "不能重新命名檔案，該檔案名稱已存在" -#: ../gio/glocalfile.c:1151 ../gio/glocalfile.c:2127 ../gio/glocalfile.c:2156 -#: ../gio/glocalfile.c:2312 ../gio/glocalfileoutputstream.c:550 -#: ../gio/glocalfileoutputstream.c:603 ../gio/glocalfileoutputstream.c:648 -#: ../gio/glocalfileoutputstream.c:1130 +#: gio/glocalfile.c:1151 gio/glocalfile.c:2127 gio/glocalfile.c:2156 +#: gio/glocalfile.c:2312 gio/glocalfileoutputstream.c:550 +#: gio/glocalfileoutputstream.c:603 gio/glocalfileoutputstream.c:648 +#: gio/glocalfileoutputstream.c:1130 msgid "Invalid filename" msgstr "無效的檔案名稱" -#: ../gio/glocalfile.c:1307 +#: gio/glocalfile.c:1307 #, c-format msgid "Error opening file: %s" msgstr "開啓檔案時發生錯誤：%s" -#: ../gio/glocalfile.c:1317 +#: gio/glocalfile.c:1317 msgid "Can't open directory" msgstr "不能開啟目錄" -#: ../gio/glocalfile.c:1442 +#: gio/glocalfile.c:1442 #, c-format msgid "Error removing file: %s" msgstr "移除檔案時發生錯誤：%s" -#: ../gio/glocalfile.c:1811 +#: gio/glocalfile.c:1811 #, c-format msgid "Error trashing file: %s" msgstr "移動檔案至回收筒時發生錯誤：%s" -#: ../gio/glocalfile.c:1834 +#: gio/glocalfile.c:1834 #, c-format msgid "Unable to create trash dir %s: %s" msgstr "無法建立回收筒目錄 %s：%s" -#: ../gio/glocalfile.c:1855 +#: gio/glocalfile.c:1855 msgid "Unable to find toplevel directory for trash" msgstr "無法找到回收筒的頂端層級目錄" -#: ../gio/glocalfile.c:1934 ../gio/glocalfile.c:1954 +#: gio/glocalfile.c:1934 gio/glocalfile.c:1954 msgid "Unable to find or create trash directory" msgstr "無法找到或建立回收筒目錄" -#: ../gio/glocalfile.c:1988 +#: gio/glocalfile.c:1988 #, c-format msgid "Unable to create trashing info file: %s" msgstr "無法建立回收筒資訊檔案：%s" -#: ../gio/glocalfile.c:2017 ../gio/glocalfile.c:2022 ../gio/glocalfile.c:2097 -#: ../gio/glocalfile.c:2104 +#: gio/glocalfile.c:2017 gio/glocalfile.c:2022 gio/glocalfile.c:2097 +#: gio/glocalfile.c:2104 #, c-format msgid "Unable to trash file: %s" msgstr "無法將檔案移至回收筒：%s" -#: ../gio/glocalfile.c:2131 +#: gio/glocalfile.c:2131 #, c-format msgid "Error creating directory: %s" msgstr "建立目錄發生錯誤：%s" -#: ../gio/glocalfile.c:2160 +#: gio/glocalfile.c:2160 #, c-format msgid "Error making symbolic link: %s" msgstr "建立符號連結時發生錯誤：%s" -#: ../gio/glocalfile.c:2222 ../gio/glocalfile.c:2316 +#: gio/glocalfile.c:2222 gio/glocalfile.c:2316 #, c-format msgid "Error moving file: %s" msgstr "移動檔案時發生錯誤：%s" -#: ../gio/glocalfile.c:2245 +#: gio/glocalfile.c:2245 msgid "Can't move directory over directory" msgstr "不能將目錄移動至目錄上" -#: ../gio/glocalfile.c:2272 ../gio/glocalfileoutputstream.c:928 -#: ../gio/glocalfileoutputstream.c:942 ../gio/glocalfileoutputstream.c:957 -#: ../gio/glocalfileoutputstream.c:973 ../gio/glocalfileoutputstream.c:987 +#: gio/glocalfile.c:2272 gio/glocalfileoutputstream.c:928 +#: gio/glocalfileoutputstream.c:942 gio/glocalfileoutputstream.c:957 +#: gio/glocalfileoutputstream.c:973 gio/glocalfileoutputstream.c:987 msgid "Backup file creation failed" msgstr "建立備份檔案失敗" -#: ../gio/glocalfile.c:2291 +#: gio/glocalfile.c:2291 #, c-format msgid "Error removing target file: %s" msgstr "移除目標檔案時發生錯誤：%s" -#: ../gio/glocalfile.c:2305 +#: gio/glocalfile.c:2305 msgid "Move between mounts not supported" msgstr "不支援在掛載點之間移動" -#: ../gio/glocalfileinfo.c:721 +#: gio/glocalfileinfo.c:721 msgid "Attribute value must be non-NULL" msgstr "屬性數值必須為非-NULL" -#: ../gio/glocalfileinfo.c:728 +#: gio/glocalfileinfo.c:728 msgid "Invalid attribute type (string expected)" msgstr "無效的屬性類型（應為字串值）" -#: ../gio/glocalfileinfo.c:735 +#: gio/glocalfileinfo.c:735 msgid "Invalid extended attribute name" msgstr "無效的延伸屬性名稱" -#: ../gio/glocalfileinfo.c:775 +#: gio/glocalfileinfo.c:775 #, c-format msgid "Error setting extended attribute '%s': %s" msgstr "設定延伸屬性「%s」時發生錯誤：%s" -#: ../gio/glocalfileinfo.c:1481 ../gio/glocalfileoutputstream.c:812 +#: gio/glocalfileinfo.c:1481 gio/glocalfileoutputstream.c:812 #, c-format msgid "Error stating file '%s': %s" msgstr "取得檔案「%s」狀態時發生錯誤：%s" -#: ../gio/glocalfileinfo.c:1552 +#: gio/glocalfileinfo.c:1552 msgid " (invalid encoding)" msgstr "（無效的編碼）" -#: ../gio/glocalfileinfo.c:1759 +#: gio/glocalfileinfo.c:1759 #, c-format msgid "Error stating file descriptor: %s" msgstr "取得檔案描述狀態時發生錯誤：%s" -#: ../gio/glocalfileinfo.c:1804 +#: gio/glocalfileinfo.c:1804 msgid "Invalid attribute type (uint32 expected)" msgstr "無效的屬性類型（應為 uint32 值）" -#: ../gio/glocalfileinfo.c:1822 +#: gio/glocalfileinfo.c:1822 msgid "Invalid attribute type (uint64 expected)" msgstr "無效的屬性類型（應為 uint64 值）" -#: ../gio/glocalfileinfo.c:1841 ../gio/glocalfileinfo.c:1860 +#: gio/glocalfileinfo.c:1841 gio/glocalfileinfo.c:1860 msgid "Invalid attribute type (byte string expected)" msgstr "無效的屬性類型（應為 byte string 值）" -#: ../gio/glocalfileinfo.c:1886 +#: gio/glocalfileinfo.c:1886 #, c-format msgid "Error setting permissions: %s" msgstr "設定權限時發生錯誤：%s" -#: ../gio/glocalfileinfo.c:1937 +#: gio/glocalfileinfo.c:1937 #, c-format msgid "Error setting owner: %s" msgstr "設定擁有者時發生錯誤：%s" -#: ../gio/glocalfileinfo.c:1960 +#: gio/glocalfileinfo.c:1960 msgid "symlink must be non-NULL" msgstr "符號連結必須為非-NULL" -#: ../gio/glocalfileinfo.c:1970 ../gio/glocalfileinfo.c:1989 -#: ../gio/glocalfileinfo.c:2000 +#: gio/glocalfileinfo.c:1970 gio/glocalfileinfo.c:1989 +#: gio/glocalfileinfo.c:2000 #, c-format msgid "Error setting symlink: %s" msgstr "設定符號連結時發生錯誤：%s" -#: ../gio/glocalfileinfo.c:1979 +#: gio/glocalfileinfo.c:1979 msgid "Error setting symlink: file is not a symlink" msgstr "設定符號連結時發生錯誤：檔案不是符號連結" -#: ../gio/glocalfileinfo.c:2105 +#: gio/glocalfileinfo.c:2105 #, c-format msgid "Error setting modification or access time: %s" msgstr "設定修改或存取時刻時發生錯誤：%s" -#: ../gio/glocalfileinfo.c:2128 +#: gio/glocalfileinfo.c:2128 msgid "SELinux context must be non-NULL" msgstr "SELinux 關聯必須為非-NULL" -#: ../gio/glocalfileinfo.c:2143 +#: gio/glocalfileinfo.c:2143 #, c-format msgid "Error setting SELinux context: %s" msgstr "設定 SELinux 關聯時發生錯誤：%s" -#: ../gio/glocalfileinfo.c:2150 +#: gio/glocalfileinfo.c:2150 msgid "SELinux is not enabled on this system" msgstr "SELinux 在這個系統上並未啟用" -#: ../gio/glocalfileinfo.c:2242 +#: gio/glocalfileinfo.c:2242 #, c-format msgid "Setting attribute %s not supported" msgstr "不支援設定屬性 %s" -#: ../gio/glocalfileinputstream.c:169 ../gio/glocalfileoutputstream.c:701 +#: gio/glocalfileinputstream.c:169 gio/glocalfileoutputstream.c:701 #, c-format msgid "Error reading from file: %s" msgstr "從檔案讀取時發生錯誤：%s" -#: ../gio/glocalfileinputstream.c:200 ../gio/glocalfileinputstream.c:212 -#: ../gio/glocalfileinputstream.c:324 ../gio/glocalfileoutputstream.c:449 -#: ../gio/glocalfileoutputstream.c:1005 +#: gio/glocalfileinputstream.c:200 gio/glocalfileinputstream.c:212 +#: gio/glocalfileinputstream.c:324 gio/glocalfileoutputstream.c:449 +#: gio/glocalfileoutputstream.c:1005 #, c-format msgid "Error seeking in file: %s" msgstr "在檔案中搜尋時發生錯誤：%s" -#: ../gio/glocalfileinputstream.c:245 ../gio/glocalfileoutputstream.c:235 -#: ../gio/glocalfileoutputstream.c:330 +#: gio/glocalfileinputstream.c:245 gio/glocalfileoutputstream.c:235 +#: gio/glocalfileoutputstream.c:330 #, c-format msgid "Error closing file: %s" msgstr "關閉檔案時發生錯誤：%s" -#: ../gio/glocalfilemonitor.c:198 +#: gio/glocalfilemonitor.c:198 msgid "Unable to find default local file monitor type" msgstr "無法找到預設的本地端檔案監視器類型" -#: ../gio/glocalfileoutputstream.c:181 ../gio/glocalfileoutputstream.c:214 -#: ../gio/glocalfileoutputstream.c:722 +#: gio/glocalfileoutputstream.c:181 gio/glocalfileoutputstream.c:214 +#: gio/glocalfileoutputstream.c:722 #, c-format msgid "Error writing to file: %s" msgstr "寫入至檔案時發生錯誤：%s" -#: ../gio/glocalfileoutputstream.c:262 +#: gio/glocalfileoutputstream.c:262 #, c-format msgid "Error removing old backup link: %s" msgstr "移除舊備份連結時發生錯誤：%s" -#: ../gio/glocalfileoutputstream.c:276 ../gio/glocalfileoutputstream.c:289 +#: gio/glocalfileoutputstream.c:276 gio/glocalfileoutputstream.c:289 #, c-format msgid "Error creating backup copy: %s" msgstr "建立備份複本時發生錯誤：%s" -#: ../gio/glocalfileoutputstream.c:307 +#: gio/glocalfileoutputstream.c:307 #, c-format msgid "Error renaming temporary file: %s" msgstr "重新命名暫存檔案時發生錯誤：%s" -#: ../gio/glocalfileoutputstream.c:495 ../gio/glocalfileoutputstream.c:1056 +#: gio/glocalfileoutputstream.c:495 gio/glocalfileoutputstream.c:1056 #, c-format msgid "Error truncating file: %s" msgstr "截短檔案時發生錯誤：%s" -#: ../gio/glocalfileoutputstream.c:556 ../gio/glocalfileoutputstream.c:609 -#: ../gio/glocalfileoutputstream.c:654 ../gio/glocalfileoutputstream.c:794 -#: ../gio/glocalfileoutputstream.c:1037 ../gio/glocalfileoutputstream.c:1136 +#: gio/glocalfileoutputstream.c:556 gio/glocalfileoutputstream.c:609 +#: gio/glocalfileoutputstream.c:654 gio/glocalfileoutputstream.c:794 +#: gio/glocalfileoutputstream.c:1037 gio/glocalfileoutputstream.c:1136 #, c-format msgid "Error opening file '%s': %s" msgstr "開啟檔案「%s」時發生錯誤：%s" -#: ../gio/glocalfileoutputstream.c:825 +#: gio/glocalfileoutputstream.c:825 msgid "Target file is a directory" msgstr "目標檔案是一個目錄" -#: ../gio/glocalfileoutputstream.c:830 +#: gio/glocalfileoutputstream.c:830 msgid "Target file is not a regular file" msgstr "目標檔案不是正規的檔案" -#: ../gio/glocalfileoutputstream.c:842 +#: gio/glocalfileoutputstream.c:842 msgid "The file was externally modified" msgstr "該檔案已被外部程式修改過" -#: ../gio/glocalfileoutputstream.c:1021 +#: gio/glocalfileoutputstream.c:1021 #, c-format msgid "Error removing old file: %s" msgstr "移除舊檔案時發生錯誤：%s" -#: ../gio/gmemoryinputstream.c:487 ../gio/gmemoryoutputstream.c:553 +#: gio/gmemoryinputstream.c:487 gio/gmemoryoutputstream.c:553 msgid "Invalid GSeekType supplied" msgstr "提供了無效的 GSeek 類型" -#: ../gio/gmemoryinputstream.c:497 ../gio/gmemoryoutputstream.c:563 +#: gio/gmemoryinputstream.c:497 gio/gmemoryoutputstream.c:563 msgid "Invalid seek request" msgstr "無效的搜尋要求" -#: ../gio/gmemoryinputstream.c:521 +#: gio/gmemoryinputstream.c:521 msgid "Cannot truncate GMemoryInputStream" msgstr "不能截短 GMemoryInputStream" -#: ../gio/gmemoryoutputstream.c:290 +#: gio/gmemoryoutputstream.c:290 msgid "Reached maximum data array limit" msgstr "已達最大資料陣列上限" -#: ../gio/gmemoryoutputstream.c:325 +#: gio/gmemoryoutputstream.c:325 msgid "Memory output stream not resizable" msgstr "記憶體輸出串流不能改變大小" -#: ../gio/gmemoryoutputstream.c:341 +#: gio/gmemoryoutputstream.c:341 msgid "Failed to resize memory output stream" msgstr "改變記憶體輸出串流的大小失敗" #. Translators: This is an error #. * message for mount objects that #. * don't implement unmount. -#: ../gio/gmount.c:378 +#: gio/gmount.c:378 msgid "mount doesn't implement unmount" msgstr "掛載點尚未實作卸載" #. Translators: This is an error #. * message for mount objects that #. * don't implement eject. -#: ../gio/gmount.c:457 +#: gio/gmount.c:457 msgid "mount doesn't implement eject" msgstr "掛載點尚未實作退出" #. Translators: This is an error #. * message for mount objects that #. * don't implement any of unmount or unmount_with_operation. -#: ../gio/gmount.c:537 +#: gio/gmount.c:537 msgid "mount doesn't implement unmount or unmount_with_operation" msgstr "掛載點尚未實作卸載(umount)或 umount_with_operation" #. Translators: This is an error #. * message for mount objects that #. * don't implement any of eject or eject_with_operation. -#: ../gio/gmount.c:624 +#: gio/gmount.c:624 msgid "mount doesn't implement eject or eject_with_operation" msgstr "掛載點尚未實作退出(eject) 或 eject_with_operation" #. Translators: This is an error #. * message for mount objects that #. * don't implement remount. -#: ../gio/gmount.c:713 +#: gio/gmount.c:713 msgid "mount doesn't implement remount" msgstr "掛載點尚未實作重新掛載" #. Translators: This is an error #. * message for mount objects that #. * don't implement content type guessing. -#: ../gio/gmount.c:797 +#: gio/gmount.c:797 msgid "mount doesn't implement content type guessing" msgstr "掛載點尚未實作內容類型預測" #. Translators: This is an error #. * message for mount objects that #. * don't implement content type guessing. -#: ../gio/gmount.c:886 +#: gio/gmount.c:886 msgid "mount doesn't implement synchronous content type guessing" msgstr "掛載點尚未實作同步內容類型預測" -#: ../gio/goutputstream.c:210 ../gio/goutputstream.c:411 +#: gio/gnetworkaddress.c:295 +#, c-format +msgid "Hostname '%s' contains '[' but not ']'" +msgstr "" + +#: gio/goutputstream.c:210 gio/goutputstream.c:411 msgid "Output stream doesn't implement write" msgstr "輸出串流尚未實作寫入" -#: ../gio/goutputstream.c:371 ../gio/goutputstream.c:780 +#: gio/goutputstream.c:371 gio/goutputstream.c:780 msgid "Source stream is already closed" msgstr "來源串流已經關閉" -#: ../gio/gthemedicon.c:499 +#: gio/gresolver.c:668 +#, fuzzy, c-format +msgid "Error resolving '%s': %s" +msgstr "讀取檔案‘%s’時發生錯誤：%s" + +#: gio/gresolver.c:718 +#, fuzzy, c-format +msgid "Error reverse-resolving '%s': %s" +msgstr "讀取檔案‘%s’時發生錯誤：%s" + +#: gio/gresolver.c:753 gio/gresolver.c:831 +#, c-format +msgid "No service record for '%s'" +msgstr "" + +#: gio/gresolver.c:758 gio/gresolver.c:836 +#, c-format +msgid "Temporarily unable to resolve '%s'" +msgstr "" + +#: gio/gresolver.c:763 gio/gresolver.c:841 +#, fuzzy, c-format +msgid "Error resolving '%s'" +msgstr "移除檔案時發生錯誤：%s" + +#: gio/gsocket.c:277 +msgid "Invalid socket, not initialized" +msgstr "" + +#: gio/gsocket.c:284 +#, c-format +msgid "Invalid socket, initialization failed due to: %s" +msgstr "" + +#: gio/gsocket.c:292 +#, fuzzy +msgid "Socket is already closed" +msgstr "來源串流已經關閉" + +#: gio/gsocket.c:405 +#, fuzzy, c-format +msgid "creating GSocket from fd: %s" +msgstr "從檔案讀取時發生錯誤：%s" + +#: gio/gsocket.c:439 gio/gsocket.c:453 gio/gsocket.c:1901 +#, fuzzy, c-format +msgid "Unable to create socket: %s" +msgstr "無法建立回收筒目錄 %s：%s" + +#: gio/gsocket.c:439 +msgid "Unknown protocol was specified" +msgstr "" + +#: gio/gsocket.c:758 +#, fuzzy +msgid "Cancellable initialization not supported" +msgstr "不支援的操作" + +#: gio/gsocket.c:1112 +#, c-format +msgid "could not get local address: %s" +msgstr "" + +#: gio/gsocket.c:1145 +#, c-format +msgid "could not get remote address: %s" +msgstr "" + +#: gio/gsocket.c:1203 +#, c-format +msgid "could not listen: %s" +msgstr "" + +#: gio/gsocket.c:1277 +#, fuzzy, c-format +msgid "Error binding to address: %s" +msgstr "寫入至檔案時發生錯誤：%s" + +#: gio/gsocket.c:1397 +#, fuzzy, c-format +msgid "Error accepting connection: %s" +msgstr "轉換時發生錯誤：%s" + +#: gio/gsocket.c:1510 +#, fuzzy +msgid "Error connecting: " +msgstr "截短檔案時發生錯誤：%s" + +#: gio/gsocket.c:1514 +msgid "Connection in progress" +msgstr "" + +#: gio/gsocket.c:1519 +#, fuzzy, c-format +msgid "Error connecting: %s" +msgstr "開啓檔案時發生錯誤：%s" + +#: gio/gsocket.c:1559 +#, fuzzy, c-format +msgid "Unable to get pending error: %s" +msgstr "無法將檔案移至回收筒：%s" + +#: gio/gsocket.c:1655 +#, fuzzy, c-format +msgid "Error receiving data: %s" +msgstr "移除檔案時發生錯誤：%s" + +#: gio/gsocket.c:1788 +#, fuzzy, c-format +msgid "Error sending data: %s" +msgstr "開啓檔案時發生錯誤：%s" + +#: gio/gsocket.c:1980 +#, fuzzy, c-format +msgid "Error closing socket: %s" +msgstr "關閉檔案時發生錯誤：%s" + +#: gio/gsocket.c:2466 +#, c-format +msgid "Waiting for socket condition: %s" +msgstr "" + +#: gio/gsocket.c:2698 gio/gsocket.c:2779 +#, fuzzy, c-format +msgid "Error sending message: %s" +msgstr "開啓檔案時發生錯誤：%s" + +#: gio/gsocket.c:2723 +#, fuzzy +msgid "GSocketControlMessage not supported on windows" +msgstr "關聯變更在 win32 上不支援" + +#: gio/gsocket.c:2981 gio/gsocket.c:3120 +#, fuzzy, c-format +msgid "Error receiving message: %s" +msgstr "移除檔案時發生錯誤：%s" + +#: gio/gsocketclient.c:521 gio/gsocketclient.c:767 +#, fuzzy +msgid "Unknown error on connect" +msgstr "不明的錯誤" + +#: gio/gsocketlistener.c:192 +#, fuzzy +msgid "Listener is already closed" +msgstr "串流已經關閉" + +#: gio/gsocketlistener.c:233 +msgid "Added socket is closed" +msgstr "" + +#: gio/gthemedicon.c:499 #, c-format msgid "Can't handle version %d of GThemedIcon encoding" msgstr "不能處理版本為 %d 的 GThemedIcon 編碼" -#: ../gio/gunixinputstream.c:358 ../gio/gunixinputstream.c:378 -#: ../gio/gunixinputstream.c:456 ../gio/gunixoutputstream.c:443 +#: gio/gunixconnection.c:151 +#, c-format +msgid "Expecting 1 control message, got %d" +msgstr "" + +#: gio/gunixconnection.c:164 +#, fuzzy +msgid "Unexpected type of ancillary data" +msgstr "未預期的串流過早結束" + +#: gio/gunixconnection.c:182 +#, c-format +msgid "Expecting one fd, but got %d\n" +msgstr "" + +#: gio/gunixconnection.c:198 +msgid "Received invalid fd" +msgstr "" + +#: gio/gunixinputstream.c:358 gio/gunixinputstream.c:378 +#: gio/gunixinputstream.c:456 gio/gunixoutputstream.c:443 #, c-format msgid "Error reading from unix: %s" msgstr "從 unix 讀取時發生錯誤：%s" -#: ../gio/gunixinputstream.c:411 ../gio/gunixinputstream.c:593 -#: ../gio/gunixoutputstream.c:398 ../gio/gunixoutputstream.c:549 +#: gio/gunixinputstream.c:411 gio/gunixinputstream.c:593 +#: gio/gunixoutputstream.c:398 gio/gunixoutputstream.c:549 #, c-format msgid "Error closing unix: %s" msgstr "關閉 unix 時發生錯誤：%s" -#: ../gio/gunixmounts.c:1846 ../gio/gunixmounts.c:1883 +#: gio/gunixmounts.c:1846 gio/gunixmounts.c:1883 msgid "Filesystem root" msgstr "根檔案系統" -#: ../gio/gunixoutputstream.c:344 ../gio/gunixoutputstream.c:365 +#: gio/gunixoutputstream.c:344 gio/gunixoutputstream.c:365 #, c-format msgid "Error writing to unix: %s" msgstr "寫入至 unix 時發生錯誤：%s" -#: ../gio/gvolume.c:452 +#: gio/gunixsocketaddress.c:182 +msgid "Abstract unix domain socket addresses not supported on this system" +msgstr "" + +#: gio/gvolume.c:452 msgid "volume doesn't implement eject" msgstr "儲存區尚未實作退出(eject)" #. Translators: This is an error #. * message for volume objects that #. * don't implement any of eject or eject_with_operation. -#: ../gio/gvolume.c:531 +#: gio/gvolume.c:531 msgid "volume doesn't implement eject or eject_with_operation" msgstr "儲存區尚未實作退出(eject) 或 eject_with_operation" -#: ../gio/gwin32appinfo.c:277 +#: gio/gwin32appinfo.c:277 msgid "Can't find application" msgstr "找不到應用程式" -#: ../gio/gwin32appinfo.c:300 +#: gio/gwin32appinfo.c:300 #, c-format msgid "Error launching application: %s" msgstr "執行應用程式時發生錯誤：%s" -#: ../gio/gwin32appinfo.c:336 +#: gio/gwin32appinfo.c:336 msgid "URIs not supported" msgstr "不支援 URIs" -#: ../gio/gwin32appinfo.c:358 +#: gio/gwin32appinfo.c:358 msgid "association changes not supported on win32" msgstr "關聯變更在 win32 上不支援" -#: ../gio/gwin32appinfo.c:370 +#: gio/gwin32appinfo.c:370 msgid "Association creation not supported on win32" msgstr "關聯建立在 win32 上不支援" -#: ../tests/gio-ls.c:27 +#: tests/gio-ls.c:27 msgid "do not hide entries" msgstr "不要隱藏項目" -#: ../tests/gio-ls.c:29 +#: tests/gio-ls.c:29 msgid "use a long listing format" msgstr "使用長式表列格式" -#: ../tests/gio-ls.c:37 +#: tests/gio-ls.c:37 msgid "[FILE...]" msgstr "[檔案...]" -#~ msgid "%u byte" -#~ msgid_plural "%u bytes" -#~ msgstr[0] "%u 位元組" - #~ msgid "" #~ "Character '%s' is not valid at the start of an entity name; the & " #~ "character begins an entity; if this ampersand isn't supposed to be an " |