path: root/src/nvml.h

/*
 * Copyright 1993-2016 NVIDIA Corporation.  All rights reserved.
 *
 * NOTICE TO USER:   
 *
 * This source code is subject to NVIDIA ownership rights under U.S. and 
 * international Copyright laws.  Users and possessors of this source code 
 * are hereby granted a nonexclusive, royalty-free license to use this code 
 * in individual and commercial software.
 *
 * NVIDIA MAKES NO REPRESENTATION ABOUT THE SUITABILITY OF THIS SOURCE 
 * CODE FOR ANY PURPOSE.  IT IS PROVIDED "AS IS" WITHOUT EXPRESS OR 
 * IMPLIED WARRANTY OF ANY KIND.  NVIDIA DISCLAIMS ALL WARRANTIES WITH 
 * REGARD TO THIS SOURCE CODE, INCLUDING ALL IMPLIED WARRANTIES OF 
 * MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE.
 * IN NO EVENT SHALL NVIDIA BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, 
 * OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS 
 * OF USE, DATA OR PROFITS,  WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE 
 * OR OTHER TORTIOUS ACTION,  ARISING OUT OF OR IN CONNECTION WITH THE USE 
 * OR PERFORMANCE OF THIS SOURCE CODE.  
 *
 * U.S. Government End Users.   This source code is a "commercial item" as 
 * that term is defined at  48 C.F.R. 2.101 (OCT 1995), consisting  of 
 * "commercial computer  software"  and "commercial computer software 
 * documentation" as such terms are  used in 48 C.F.R. 12.212 (SEPT 1995) 
 * and is provided to the U.S. Government only as a commercial end item.  
 * Consistent with 48 C.F.R.12.212 and 48 C.F.R. 227.7202-1 through 
 * 227.7202-4 (JUNE 1995), all U.S. Government End Users acquire the 
 * source code with only those rights set forth herein. 
 *
 * Any use of this source code in individual and commercial software must 
 * include, in the user documentation and internal comments to the code,
 * the above Disclaimer and U.S. Government End Users Notice.
 */

/* 
NVML API Reference

The NVIDIA Management Library (NVML) is a C-based programmatic interface for monitoring and 
managing various states within NVIDIA Tesla &tm; GPUs. It is intended to be a platform for building
3rd party applications, and is also the underlying library for the NVIDIA-supported nvidia-smi
tool. NVML is thread-safe so it is safe to make simultaneous NVML calls from multiple threads.

API Documentation

Supported platforms:
- Windows:     Windows Server 2008 R2 64bit, Windows Server 2012 R2 64bit, Windows 7 64bit, Windows 8 64bit, Windows 10 64bit
- Linux:       32-bit and 64-bit
- Hypervisors: Windows Server 2008R2/2012 Hyper-V 64bit, Citrix XenServer 6.2 SP1+, VMware ESX 5.1/5.5

Supported products:
- Full Support
    - All Tesla products, starting with the Fermi architecture
    - All Quadro products, starting with the Fermi architecture
    - All GRID products, starting with the Kepler architecture
    - Selected GeForce Titan products
- Limited Support
    - All Geforce products, starting with the Fermi architecture

The NVML library can be found at \%ProgramW6432\%\\"NVIDIA Corporation"\\NVSMI\\ on Windows. It is
not be added to the system path by default. To dynamically link to NVML, add this path to the PATH 
environmental variable. To dynamically load NVML, call LoadLibrary with this path.

On Linux the NVML library will be found on the standard library path. For 64 bit Linux, both the 32 bit
and 64 bit NVML libraries will be installed.

Online documentation for this library is available at http://docs.nvidia.com/deploy/nvml-api/index.html
*/

#ifndef __nvml_nvml_h__
#define __nvml_nvml_h__

#ifdef __cplusplus
extern "C" {
#endif

/*
 * On Windows, set up methods for DLL export
 * define NVML_STATIC_IMPORT when using nvml_loader library
 */
#if defined _WINDOWS
    #if !defined NVML_STATIC_IMPORT
        #if defined NVML_LIB_EXPORT
            #define DECLDIR __declspec(dllexport)
        #else
            #define DECLDIR __declspec(dllimport)
        #endif
    #else
        #define DECLDIR
    #endif
#else
    #define DECLDIR
#endif

/**
 * NVML API versioning support
 */
#define NVML_API_VERSION            8
#define NVML_API_VERSION_STR        "8"
#define nvmlInit                    nvmlInit_v2
#define nvmlDeviceGetPciInfo        nvmlDeviceGetPciInfo_v2
#define nvmlDeviceGetCount          nvmlDeviceGetCount_v2
#define nvmlDeviceGetHandleByIndex  nvmlDeviceGetHandleByIndex_v2
#define nvmlDeviceGetHandleByPciBusId nvmlDeviceGetHandleByPciBusId_v2

/***************************************************************************************************/
/** @defgroup nvmlDeviceStructs Device Structs
 *  @{
 */
/***************************************************************************************************/

/**
 * Special constant that some fields take when they are not available.
 * Used when only part of the struct is not available.
 *
 * Each structure explicitly states when to check for this value.
 */
#define NVML_VALUE_NOT_AVAILABLE (-1)

typedef struct nvmlDevice_st* nvmlDevice_t;

/**
 * Buffer size guaranteed to be large enough for pci bus id
 */
#define NVML_DEVICE_PCI_BUS_ID_BUFFER_SIZE   16

/**
 * PCI information about a GPU device.
 */
typedef struct nvmlPciInfo_st 
{
    char busId[NVML_DEVICE_PCI_BUS_ID_BUFFER_SIZE]; //!< The tuple domain:bus:device.function PCI identifier (&amp; NULL terminator)
    unsigned int domain;             //!< The PCI domain on which the device's bus resides, 0 to 0xffff
    unsigned int bus;                //!< The bus on which the device resides, 0 to 0xff
    unsigned int device;             //!< The device's id on the bus, 0 to 31
    unsigned int pciDeviceId;        //!< The combined 16-bit device id and 16-bit vendor id
    
    // Added in NVML 2.285 API
    unsigned int pciSubSystemId;     //!< The 32-bit Sub System Device ID
    
    // NVIDIA reserved for internal use only
    unsigned int reserved0;
    unsigned int reserved1;
    unsigned int reserved2;
    unsigned int reserved3;
} nvmlPciInfo_t;

/**
 * Detailed ECC error counts for a device.
 *
 * @deprecated  Different GPU families can have different memory error counters
 *              See \ref nvmlDeviceGetMemoryErrorCounter
 */
typedef struct nvmlEccErrorCounts_st 
{
    unsigned long long l1Cache;      //!< L1 cache errors
    unsigned long long l2Cache;      //!< L2 cache errors
    unsigned long long deviceMemory; //!< Device memory errors
    unsigned long long registerFile; //!< Register file errors
} nvmlEccErrorCounts_t;

/** 
 * Utilization information for a device.
 * Each sample period may be between 1 second and 1/6 second, depending on the product being queried.
 */
typedef struct nvmlUtilization_st 
{
    unsigned int gpu;                //!< Percent of time over the past sample period during which one or more kernels was executing on the GPU
    unsigned int memory;             //!< Percent of time over the past sample period during which global (device) memory was being read or written
} nvmlUtilization_t;

/** 
 * Memory allocation information for a device.
 */
typedef struct nvmlMemory_st 
{
    unsigned long long total;        //!< Total installed FB memory (in bytes)
    unsigned long long free;         //!< Unallocated FB memory (in bytes)
    unsigned long long used;         //!< Allocated FB memory (in bytes). Note that the driver/GPU always sets aside a small amount of memory for bookkeeping
} nvmlMemory_t;

/**
 * BAR1 Memory allocation Information for a device
 */
typedef struct nvmlBAR1Memory_st
{
    unsigned long long bar1Total;    //!< Total BAR1 Memory (in bytes)
    unsigned long long bar1Free;     //!< Unallocated BAR1 Memory (in bytes)
    unsigned long long bar1Used;     //!< Allocated Used Memory (in bytes)
}nvmlBAR1Memory_t;

/**
 * Information about running compute processes on the GPU
 */
typedef struct nvmlProcessInfo_st
{
    unsigned int pid;                 //!< Process ID
    unsigned long long usedGpuMemory; //!< Amount of used GPU memory in bytes.
                                      //! Under WDDM, \ref NVML_VALUE_NOT_AVAILABLE is always reported
                                      //! because Windows KMD manages all the memory and not the NVIDIA driver
} nvmlProcessInfo_t;

/**
 * XIDs error attributes for a given device
 */
typedef struct nvmlXidEntry_st
{
    unsigned int xidTimeStamp;     //! Timestamp of the Xid Error occurrence
    unsigned int xidNumber;        //! Number of Xid currently present on device's Inforom
}nvmlXidEntry_t;

typedef struct nvmlXidData_st
{
    unsigned int xidFirstEntryCount;  //! Number of entries that are populated in xidFirstEntry.
    nvmlXidEntry_t xidFirstEntry[10]; //! Array of entries of the first Xids encountered since the Inforom was last flashed.
    unsigned int xidLastEntryCount;   //! Number of entries that are populated in xidLastEntry.
    nvmlXidEntry_t xidLastEntry[10];  //! Array of entries of the most recent Xid errors that have occurred.
}nvmlXidData_t;

/**
 * Enum to represent type of bridge chip
 */
typedef enum nvmlBridgeChipType_enum
{
    NVML_BRIDGE_CHIP_PLX = 0,
    NVML_BRIDGE_CHIP_BRO4 = 1           
}nvmlBridgeChipType_t;

/**
 * Maximum number of NvLink links supported 
 */
#define NVML_NVLINK_MAX_LINKS 4

/**
 * Enum to represent the NvLink utilization counter packet units
 */
typedef enum nvmlNvLinkUtilizationCountUnits_enum
{
    NVML_NVLINK_COUNTER_UNIT_CYCLES =  0,     // count by cycles
    NVML_NVLINK_COUNTER_UNIT_PACKETS = 1,     // count by packets
    NVML_NVLINK_COUNTER_UNIT_BYTES   = 2,     // count by bytes

    // this must be last
    NVML_NVLINK_COUNTER_UNIT_COUNT
} nvmlNvLinkUtilizationCountUnits_t;

/**
 * Enum to represent the NvLink utilization counter packet types to count
 *  ** this is ONLY applicable with the units as packets or bytes
 *  ** as specified in \a nvmlNvLinkUtilizationCountUnits_t
 *  ** all packet filter descriptions are target GPU centric
 *  ** these can be "OR'd" together 
 */
typedef enum nvmlNvLinkUtilizationCountPktTypes_enum
{
    NVML_NVLINK_COUNTER_PKTFILTER_NOP        = 0x1,     // no operation packets
    NVML_NVLINK_COUNTER_PKTFILTER_READ       = 0x2,     // read packets
    NVML_NVLINK_COUNTER_PKTFILTER_WRITE      = 0x4,     // write packets
    NVML_NVLINK_COUNTER_PKTFILTER_RATOM      = 0x8,     // reduction atomic requests
    NVML_NVLINK_COUNTER_PKTFILTER_NRATOM     = 0x10,    // non-reduction atomic requests
    NVML_NVLINK_COUNTER_PKTFILTER_FLUSH      = 0x20,    // flush requests
    NVML_NVLINK_COUNTER_PKTFILTER_RESPDATA   = 0x40,    // responses with data
    NVML_NVLINK_COUNTER_PKTFILTER_RESPNODATA = 0x80,    // responses without data
    NVML_NVLINK_COUNTER_PKTFILTER_ALL        = 0xFF     // all packets
} nvmlNvLinkUtilizationCountPktTypes_t;

/** 
 * Struct to define the NVLINK counter controls
 */
typedef struct nvmlNvLinkUtilizationControl_st
{
    nvmlNvLinkUtilizationCountUnits_t units;
    nvmlNvLinkUtilizationCountPktTypes_t pktfilter;
} nvmlNvLinkUtilizationControl_t;

/**
 * Enum to represent NvLink queryable capabilities
 */
typedef enum nvmlNvLinkCapability_enum
{
    NVML_NVLINK_CAP_P2P_SUPPORTED = 0,     // P2P over NVLink is supported
    NVML_NVLINK_CAP_SYSMEM_ACCESS = 1,     // Access to system memory is supported
    NVML_NVLINK_CAP_P2P_ATOMICS   = 2,     // P2P atomics are supported
    NVML_NVLINK_CAP_SYSMEM_ATOMICS= 3,     // System memory atomics are supported
    NVML_NVLINK_CAP_SLI_BRIDGE    = 4,     // SLI is supported over this link
    NVML_NVLINK_CAP_VALID         = 5,     // Link is supported on this device
    // should be last
    NVML_NVLINK_CAP_COUNT
} nvmlNvLinkCapability_t;

/**
 * Enum to represent NvLink queryable error counters
 */
typedef enum nvmlNvLinkErrorCounter_enum
{
    NVML_NVLINK_ERROR_DL_REPLAY   = 0,     // Data link transmit replay error counter
    NVML_NVLINK_ERROR_DL_RECOVERY = 1,     // Data link transmit recovery error counter
    NVML_NVLINK_ERROR_DL_CRC_FLIT = 2,     // Data link receive flow control digit CRC error counter
    NVML_NVLINK_ERROR_DL_CRC_DATA = 3,     // Data link receive data CRC error counter

    // this must be last
    NVML_NVLINK_ERROR_COUNT
} nvmlNvLinkErrorCounter_t;

/**
 * Represents level relationships within a system between two GPUs
 * The enums are spaced to allow for future relationships
 */
typedef enum nvmlGpuLevel_enum
{
    NVML_TOPOLOGY_INTERNAL           = 0, // e.g. Tesla K80
    NVML_TOPOLOGY_SINGLE             = 10, // all devices that only need traverse a single PCIe switch
    NVML_TOPOLOGY_MULTIPLE           = 20, // all devices that need not traverse a host bridge
    NVML_TOPOLOGY_HOSTBRIDGE         = 30, // all devices that are connected to the same host bridge
    NVML_TOPOLOGY_CPU                = 40, // all devices that are connected to the same CPU but possibly multiple host bridges
    NVML_TOPOLOGY_SYSTEM             = 50, // all devices in the system

    // there is purposefully no COUNT here because of the need for spacing above
} nvmlGpuTopologyLevel_t;

/* P2P Capability Index Status*/
typedef enum nvmlGpuP2PStatus_enum
{
    NVML_P2P_STATUS_OK     = 0,
    NVML_P2P_STATUS_CHIPSET_NOT_SUPPORED,
    NVML_P2P_STATUS_GPU_NOT_SUPPORTED,
    NVML_P2P_STATUS_IOH_TOPOLOGY_NOT_SUPPORTED,
    NVML_P2P_STATUS_DISABLED_BY_REGKEY,
    NVML_P2P_STATUS_NOT_SUPPORTED,
    NVML_P2P_STATUS_UNKNOWN

} nvmlGpuP2PStatus_t;

/* P2P Capability Index*/
typedef enum nvmlGpuP2PCapsIndex_enum
{
    NVML_P2P_CAPS_INDEX_READ = 0,
    NVML_P2P_CAPS_INDEX_WRITE,
    NVML_P2P_CAPS_INDEX_NVLINK,
    NVML_P2P_CAPS_INDEX_ATOMICS,
    NVML_P2P_CAPS_INDEX_PROP,
    NVML_P2P_CAPS_INDEX_UNKNOWN
}nvmlGpuP2PCapsIndex_t;

/**
 * Maximum limit on Physical Bridges per Board
 */
#define NVML_MAX_PHYSICAL_BRIDGE                         (128)

/**
 * Information about the Bridge Chip Firmware
 */
typedef struct nvmlBridgeChipInfo_st
{
    nvmlBridgeChipType_t type;                  //!< Type of Bridge Chip 
    unsigned int fwVersion;                     //!< Firmware Version. 0=Version is unavailable
}nvmlBridgeChipInfo_t;

/**
 * This structure stores the complete Hierarchy of the Bridge Chip within the board. The immediate 
 * bridge is stored at index 0 of bridgeInfoList, parent to immediate bridge is at index 1 and so forth.
 */
typedef struct nvmlBridgeChipHierarchy_st
{
    unsigned char  bridgeCount;                 //!< Number of Bridge Chips on the Board
    nvmlBridgeChipInfo_t bridgeChipInfo[NVML_MAX_PHYSICAL_BRIDGE]; //!< Hierarchy of Bridge Chips on the board
}nvmlBridgeChipHierarchy_t;

/**
 *  Represents Type of Sampling Event
 */
typedef enum nvmlSamplingType_enum
{
    NVML_TOTAL_POWER_SAMPLES        = 0, //!< To represent total power drawn by GPU
    NVML_GPU_UTILIZATION_SAMPLES    = 1, //!< To represent percent of time during which one or more kernels was executing on the GPU
    NVML_MEMORY_UTILIZATION_SAMPLES = 2, //!< To represent percent of time during which global (device) memory was being read or written
    NVML_ENC_UTILIZATION_SAMPLES    = 3, //!< To represent percent of time during which NVENC remains busy
    NVML_DEC_UTILIZATION_SAMPLES    = 4, //!< To represent percent of time during which NVDEC remains busy            
    NVML_PROCESSOR_CLK_SAMPLES      = 5, //!< To represent processor clock samples
    NVML_MEMORY_CLK_SAMPLES         = 6, //!< To represent memory clock samples
            
    // Keep this last
    NVML_SAMPLINGTYPE_COUNT               
}nvmlSamplingType_t;

/**
 * Represents the queryable PCIe utilization counters
 */
typedef enum nvmlPcieUtilCounter_enum
{
    NVML_PCIE_UTIL_TX_BYTES             = 0, // 1KB granularity
    NVML_PCIE_UTIL_RX_BYTES             = 1, // 1KB granularity
    
    // Keep this last
    NVML_PCIE_UTIL_COUNT
} nvmlPcieUtilCounter_t;

/**
 * Represents the type for sample value returned
 */
typedef enum nvmlValueType_enum 
{
    NVML_VALUE_TYPE_DOUBLE = 0,
    NVML_VALUE_TYPE_UNSIGNED_INT = 1,
    NVML_VALUE_TYPE_UNSIGNED_LONG = 2,
    NVML_VALUE_TYPE_UNSIGNED_LONG_LONG = 3,

    // Keep this last
    NVML_VALUE_TYPE_COUNT
}nvmlValueType_t;


/**
 * Union to represent different types of Value
 */
typedef union nvmlValue_st
{
    double dVal;                    //!< If the value is double
    unsigned int uiVal;             //!< If the value is unsigned int
    unsigned long ulVal;            //!< If the value is unsigned long
    unsigned long long ullVal;      //!< If the value is unsigned long long
}nvmlValue_t;

/**
 * Information for Sample
 */
typedef struct nvmlSample_st 
{
    unsigned long long timeStamp;       //!< CPU Timestamp in microseconds
    nvmlValue_t sampleValue;        //!< Sample Value
}nvmlSample_t;

/**
 * Represents type of perf policy for which violation times can be queried 
 */
typedef enum nvmlPerfPolicyType_enum
{
    NVML_PERF_POLICY_POWER = 0,
    NVML_PERF_POLICY_THERMAL = 1,
    NVML_PERF_POLICY_SYNC_BOOST = 2,
    NVML_PERF_POLICY_BOARD_LIMIT = 3,
    NVML_PERF_POLICY_LOW_UTILIZATION = 4,
    NVML_PERF_POLICY_RELIABILITY = 5,

    // Keep this last
    NVML_PERF_POLICY_COUNT
}nvmlPerfPolicyType_t;

/*
 * Represents type of encoder for capacity can be queried
 */
typedef enum nvmlEncoderQueryType_enum
{
    NVML_ENCODER_QUERY_H264 = 0,
    NVML_ENCODER_QUERY_HEVC = 1,
}nvmlEncoderQueryType_t;

/**
 * Struct to hold perf policy violation status data
 */
typedef struct nvmlViolationTime_st
{
    unsigned long long referenceTime;  //!< referenceTime represents CPU timestamp in microseconds
    unsigned long long violationTime;  //!< violationTime in Nanoseconds
}nvmlViolationTime_t;

/** @} */

/***************************************************************************************************/
/** @defgroup nvmlDeviceEnumvs Device Enums
 *  @{
 */
/***************************************************************************************************/

/** 
 * Generic enable/disable enum. 
 */
typedef enum nvmlEnableState_enum 
{
    NVML_FEATURE_DISABLED    = 0,     //!< Feature disabled 
    NVML_FEATURE_ENABLED     = 1      //!< Feature enabled
} nvmlEnableState_t;

//! Generic flag used to specify the default behavior of some functions. See description of particular functions for details.
#define nvmlFlagDefault     0x00      
//! Generic flag used to force some behavior. See description of particular functions for details.
#define nvmlFlagForce       0x01      

/**
 *  * The Brand of the GPU
 *   */
typedef enum nvmlBrandType_enum
{
    NVML_BRAND_UNKNOWN = 0, 
    NVML_BRAND_QUADRO  = 1,
    NVML_BRAND_TESLA   = 2,
    NVML_BRAND_NVS     = 3,
    NVML_BRAND_GRID    = 4,
    NVML_BRAND_GEFORCE = 5,

    // Keep this last
    NVML_BRAND_COUNT
} nvmlBrandType_t;

/**
 * Temperature thresholds.
 */
typedef enum nvmlTemperatureThresholds_enum
{
    NVML_TEMPERATURE_THRESHOLD_SHUTDOWN = 0,    // Temperature at which the GPU will shut down
                                                // for HW protection
    NVML_TEMPERATURE_THRESHOLD_SLOWDOWN = 1,    // Temperature at which the GPU will begin slowdown
    // Keep this last
    NVML_TEMPERATURE_THRESHOLD_COUNT
} nvmlTemperatureThresholds_t;

/** 
 * Temperature sensors. 
 */
typedef enum nvmlTemperatureSensors_enum 
{
    NVML_TEMPERATURE_GPU      = 0,    //!< Temperature sensor for the GPU die
    
    // Keep this last
    NVML_TEMPERATURE_COUNT
} nvmlTemperatureSensors_t;

/** 
 * Compute mode. 
 *
 * NVML_COMPUTEMODE_EXCLUSIVE_PROCESS was added in CUDA 4.0.
 * Earlier CUDA versions supported a single exclusive mode, 
 * which is equivalent to NVML_COMPUTEMODE_EXCLUSIVE_THREAD in CUDA 4.0 and beyond.
 */
typedef enum nvmlComputeMode_enum 
{
    NVML_COMPUTEMODE_DEFAULT           = 0,  //!< Default compute mode -- multiple contexts per device
    NVML_COMPUTEMODE_EXCLUSIVE_THREAD  = 1,  //!< Support Removed
    NVML_COMPUTEMODE_PROHIBITED        = 2,  //!< Compute-prohibited mode -- no contexts per device
    NVML_COMPUTEMODE_EXCLUSIVE_PROCESS = 3,  //!< Compute-exclusive-process mode -- only one context per device, usable from multiple threads at a time
    
    // Keep this last
    NVML_COMPUTEMODE_COUNT
} nvmlComputeMode_t;

/** 
 * ECC bit types.
 *
 * @deprecated See \ref nvmlMemoryErrorType_t for a more flexible type
 */
#define nvmlEccBitType_t nvmlMemoryErrorType_t

/**
 * Single bit ECC errors
 *
 * @deprecated Mapped to \ref NVML_MEMORY_ERROR_TYPE_CORRECTED
 */
#define NVML_SINGLE_BIT_ECC NVML_MEMORY_ERROR_TYPE_CORRECTED

/**
 * Double bit ECC errors
 *
 * @deprecated Mapped to \ref NVML_MEMORY_ERROR_TYPE_UNCORRECTED
 */
#define NVML_DOUBLE_BIT_ECC NVML_MEMORY_ERROR_TYPE_UNCORRECTED

/**
 * Memory error types
 */
typedef enum nvmlMemoryErrorType_enum
{
    /**
     * A memory error that was corrected
     * 
     * For ECC errors, these are single bit errors
     * For Texture memory, these are errors fixed by resend
     */
    NVML_MEMORY_ERROR_TYPE_CORRECTED = 0,
    /**
     * A memory error that was not corrected
     * 
     * For ECC errors, these are double bit errors
     * For Texture memory, these are errors where the resend fails
     */
    NVML_MEMORY_ERROR_TYPE_UNCORRECTED = 1,
    
    
    // Keep this last
    NVML_MEMORY_ERROR_TYPE_COUNT //!< Count of memory error types

} nvmlMemoryErrorType_t;

/** 
 * ECC counter types. 
 *
 * Note: Volatile counts are reset each time the driver loads. On Windows this is once per boot. On Linux this can be more frequent.
 *       On Linux the driver unloads when no active clients exist. If persistence mode is enabled or there is always a driver 
 *       client active (e.g. X11), then Linux also sees per-boot behavior. If not, volatile counts are reset each time a compute app
 *       is run.
 */
typedef enum nvmlEccCounterType_enum 
{
    NVML_VOLATILE_ECC      = 0,      //!< Volatile counts are reset each time the driver loads.
    NVML_AGGREGATE_ECC     = 1,      //!< Aggregate counts persist across reboots (i.e. for the lifetime of the device)
    
    // Keep this last
    NVML_ECC_COUNTER_TYPE_COUNT      //!< Count of memory counter types
} nvmlEccCounterType_t;

/** 
 * Clock types. 
 * 
 * All speeds are in Mhz.
 */
typedef enum nvmlClockType_enum 
{
    NVML_CLOCK_GRAPHICS  = 0,        //!< Graphics clock domain
    NVML_CLOCK_SM        = 1,        //!< SM clock domain
    NVML_CLOCK_MEM       = 2,        //!< Memory clock domain
    NVML_CLOCK_VIDEO     = 3,        //!< Video encoder/decoder clock domain
    
    // Keep this last
    NVML_CLOCK_COUNT //<! Count of clock types
} nvmlClockType_t;

/**
 * Clock Ids.  These are used in combination with nvmlClockType_t
 * to specify a single clock value.
 */
typedef enum nvmlClockId_enum
{
    NVML_CLOCK_ID_CURRENT            = 0,   //!< Current actual clock value
    NVML_CLOCK_ID_APP_CLOCK_TARGET   = 1,   //!< Target application clock
    NVML_CLOCK_ID_APP_CLOCK_DEFAULT  = 2,   //!< Default application clock target
    NVML_CLOCK_ID_CUSTOMER_BOOST_MAX = 3,   //!< OEM-defined maximum clock rate

    //Keep this last
    NVML_CLOCK_ID_COUNT //<! Count of Clock Ids.
} nvmlClockId_t;

/** 
 * Driver models. 
 *
 * Windows only.
 */
typedef enum nvmlDriverModel_enum 
{
    NVML_DRIVER_WDDM      = 0,       //!< WDDM driver model -- GPU treated as a display device
    NVML_DRIVER_WDM       = 1        //!< WDM (TCC) model (recommended) -- GPU treated as a generic device
} nvmlDriverModel_t;

/**
 * Allowed PStates.
 */
typedef enum nvmlPStates_enum 
{
    NVML_PSTATE_0               = 0,       //!< Performance state 0 -- Maximum Performance
    NVML_PSTATE_1               = 1,       //!< Performance state 1 
    NVML_PSTATE_2               = 2,       //!< Performance state 2
    NVML_PSTATE_3               = 3,       //!< Performance state 3
    NVML_PSTATE_4               = 4,       //!< Performance state 4
    NVML_PSTATE_5               = 5,       //!< Performance state 5
    NVML_PSTATE_6               = 6,       //!< Performance state 6
    NVML_PSTATE_7               = 7,       //!< Performance state 7
    NVML_PSTATE_8               = 8,       //!< Performance state 8
    NVML_PSTATE_9               = 9,       //!< Performance state 9
    NVML_PSTATE_10              = 10,      //!< Performance state 10
    NVML_PSTATE_11              = 11,      //!< Performance state 11
    NVML_PSTATE_12              = 12,      //!< Performance state 12
    NVML_PSTATE_13              = 13,      //!< Performance state 13
    NVML_PSTATE_14              = 14,      //!< Performance state 14
    NVML_PSTATE_15              = 15,      //!< Performance state 15 -- Minimum Performance 
    NVML_PSTATE_UNKNOWN         = 32       //!< Unknown performance state
} nvmlPstates_t;

/**
 * GPU Operation Mode
 *
 * GOM allows to reduce power usage and optimize GPU throughput by disabling GPU features.
 *
 * Each GOM is designed to meet specific user needs.
 */
typedef enum nvmlGom_enum
{
    NVML_GOM_ALL_ON                    = 0, //!< Everything is enabled and running at full speed

    NVML_GOM_COMPUTE                   = 1, //!< Designed for running only compute tasks. Graphics operations
                                            //!< are not allowed

    NVML_GOM_LOW_DP                    = 2  //!< Designed for running graphics applications that don't require
                                            //!< high bandwidth double precision
} nvmlGpuOperationMode_t;

/** 
 * Available infoROM objects.
 */
typedef enum nvmlInforomObject_enum 
{
    NVML_INFOROM_OEM            = 0,       //!< An object defined by OEM
    NVML_INFOROM_ECC            = 1,       //!< The ECC object determining the level of ECC support
    NVML_INFOROM_POWER          = 2,       //!< The power management object

    // Keep this last
    NVML_INFOROM_COUNT                     //!< This counts the number of infoROM objects the driver knows about
} nvmlInforomObject_t;

/** 
 * Return values for NVML API calls. 
 */
typedef enum nvmlReturn_enum 
{
    NVML_SUCCESS = 0,                   //!< The operation was successful
    NVML_ERROR_UNINITIALIZED = 1,       //!< NVML was not first initialized with nvmlInit()
    NVML_ERROR_INVALID_ARGUMENT = 2,    //!< A supplied argument is invalid
    NVML_ERROR_NOT_SUPPORTED = 3,       //!< The requested operation is not available on target device
    NVML_ERROR_NO_PERMISSION = 4,       //!< The current user does not have permission for operation
    NVML_ERROR_ALREADY_INITIALIZED = 5, //!< Deprecated: Multiple initializations are now allowed through ref counting
    NVML_ERROR_NOT_FOUND = 6,           //!< A query to find an object was unsuccessful
    NVML_ERROR_INSUFFICIENT_SIZE = 7,   //!< An input argument is not large enough
    NVML_ERROR_INSUFFICIENT_POWER = 8,  //!< A device's external power cables are not properly attached
    NVML_ERROR_DRIVER_NOT_LOADED = 9,   //!< NVIDIA driver is not loaded
    NVML_ERROR_TIMEOUT = 10,            //!< User provided timeout passed
    NVML_ERROR_IRQ_ISSUE = 11,          //!< NVIDIA Kernel detected an interrupt issue with a GPU
    NVML_ERROR_LIBRARY_NOT_FOUND = 12,  //!< NVML Shared Library couldn't be found or loaded
    NVML_ERROR_FUNCTION_NOT_FOUND = 13, //!< Local version of NVML doesn't implement this function
    NVML_ERROR_CORRUPTED_INFOROM = 14,  //!< infoROM is corrupted
    NVML_ERROR_GPU_IS_LOST = 15,        //!< The GPU has fallen off the bus or has otherwise become inaccessible
    NVML_ERROR_RESET_REQUIRED = 16,     //!< The GPU requires a reset before it can be used again
    NVML_ERROR_OPERATING_SYSTEM = 17,   //!< The GPU control device has been blocked by the operating system/cgroups
    NVML_ERROR_LIB_RM_VERSION_MISMATCH = 18,   //!< RM detects a driver/library version mismatch
    NVML_ERROR_MEMORY = 19,             //!< Insufficient memory
    NVML_ERROR_NO_DATA = 20,            //!<No data
    NVML_ERROR_UNKNOWN = 999            //!< An internal driver error occurred
} nvmlReturn_t;

/**
 * Memory locations
 *
 * See \ref nvmlDeviceGetMemoryErrorCounter
 */
typedef enum nvmlMemoryLocation_enum
{
    NVML_MEMORY_LOCATION_L1_CACHE = 0,       //!< GPU L1 Cache
    NVML_MEMORY_LOCATION_L2_CACHE = 1,       //!< GPU L2 Cache
    NVML_MEMORY_LOCATION_DEVICE_MEMORY = 2,  //!< GPU Device Memory
    NVML_MEMORY_LOCATION_REGISTER_FILE = 3,  //!< GPU Register File
    NVML_MEMORY_LOCATION_TEXTURE_MEMORY = 4, //!< GPU Texture Memory
    NVML_MEMORY_LOCATION_TEXTURE_SHM    = 5, //!< Shared memory
    
    // Keep this last
    NVML_MEMORY_LOCATION_COUNT              //!< This counts the number of memory locations the driver knows about
} nvmlMemoryLocation_t;

/**
 * Causes for page retirement
 */
typedef enum nvmlPageRetirementCause_enum
{
    NVML_PAGE_RETIREMENT_CAUSE_MULTIPLE_SINGLE_BIT_ECC_ERRORS = 0, //!< Page was retired due to multiple single bit ECC error
    NVML_PAGE_RETIREMENT_CAUSE_DOUBLE_BIT_ECC_ERROR = 1,           //!< Page was retired due to double bit ECC error

    // Keep this last
    NVML_PAGE_RETIREMENT_CAUSE_COUNT
} nvmlPageRetirementCause_t;

/**
 * API types that allow changes to default permission restrictions
 */
typedef enum nvmlRestrictedAPI_enum
{
    NVML_RESTRICTED_API_SET_APPLICATION_CLOCKS = 0,   //!< APIs that change application clocks, see nvmlDeviceSetApplicationsClocks 
                                                      //!< and see nvmlDeviceResetApplicationsClocks
    NVML_RESTRICTED_API_SET_AUTO_BOOSTED_CLOCKS = 1,  //!< APIs that enable/disable Auto Boosted clocks
                                                      //!< see nvmlDeviceSetAutoBoostedClocksEnabled
    // Keep this last
    NVML_RESTRICTED_API_COUNT
} nvmlRestrictedAPI_t;

/** @} */

/***************************************************************************************************/
/** @defgroup nvmlGridEnums GRID Enums
 *  @{
 */
/***************************************************************************************************/

/*!
 * GPU virtualization mode types.
 */
typedef enum nvmlGpuVirtualizationMode {
    NVML_GPU_VIRTUALIZATION_MODE_NONE = 0,  //!< Represents Bare Metal GPU
    NVML_GPU_VIRTUALIZATION_MODE_PASSTHROUGH = 1,  //!< Device is associated with GPU-Passthorugh
    NVML_GPU_VIRTUALIZATION_MODE_VGPU = 2,  //!< Device is associated with vGPU inside virtual machine.
    NVML_GPU_VIRTUALIZATION_MODE_HOST_VGPU = 3,  //!< Device is associated with VGX hypervisor in vGPU mode
    NVML_GPU_VIRTUALIZATION_MODE_HOST_VSGA = 4,  //!< Device is associated with VGX hypervisor in vSGA mode
} nvmlGpuVirtualizationMode_t;

/** @} */

/***************************************************************************************************/
/** @defgroup nvmlUnitStructs Unit Structs
 *  @{
 */
/***************************************************************************************************/

typedef struct nvmlUnit_st* nvmlUnit_t;

/** 
 * Description of HWBC entry 
 */
typedef struct nvmlHwbcEntry_st 
{
    unsigned int hwbcId;
    char firmwareVersion[32];
} nvmlHwbcEntry_t;

/** 
 * Fan state enum. 
 */
typedef enum nvmlFanState_enum 
{
    NVML_FAN_NORMAL       = 0,     //!< Fan is working properly
    NVML_FAN_FAILED       = 1      //!< Fan has failed
} nvmlFanState_t;

/** 
 * Led color enum. 
 */
typedef enum nvmlLedColor_enum 
{
    NVML_LED_COLOR_GREEN       = 0,     //!< GREEN, indicates good health
    NVML_LED_COLOR_AMBER       = 1      //!< AMBER, indicates problem
} nvmlLedColor_t;


/** 
 * LED states for an S-class unit.
 */
typedef struct nvmlLedState_st 
{
    char cause[256];               //!< If amber, a text description of the cause
    nvmlLedColor_t color;          //!< GREEN or AMBER
} nvmlLedState_t;

/** 
 * Static S-class unit info.
 */
typedef struct nvmlUnitInfo_st 
{
    char name[96];                      //!< Product name
    char id[96];                        //!< Product identifier
    char serial[96];                    //!< Product serial number
    char firmwareVersion[96];           //!< Firmware version
} nvmlUnitInfo_t;

/** 
 * Power usage information for an S-class unit.
 * The power supply state is a human readable string that equals "Normal" or contains
 * a combination of "Abnormal" plus one or more of the following:
 *    
 *    - High voltage
 *    - Fan failure
 *    - Heatsink temperature
 *    - Current limit
 *    - Voltage below UV alarm threshold
 *    - Low-voltage
 *    - SI2C remote off command
 *    - MOD_DISABLE input
 *    - Short pin transition 
*/
typedef struct nvmlPSUInfo_st 
{
    char state[256];                 //!< The power supply state
    unsigned int current;            //!< PSU current (A)
    unsigned int voltage;            //!< PSU voltage (V)
    unsigned int power;              //!< PSU power draw (W)
} nvmlPSUInfo_t;

/** 
 * Fan speed reading for a single fan in an S-class unit.
 */
typedef struct nvmlUnitFanInfo_st 
{
    unsigned int speed;              //!< Fan speed (RPM)
    nvmlFanState_t state;            //!< Flag that indicates whether fan is working properly
} nvmlUnitFanInfo_t;

/** 
 * Fan speed readings for an entire S-class unit.
 */
typedef struct nvmlUnitFanSpeeds_st 
{
    nvmlUnitFanInfo_t fans[24];      //!< Fan speed data for each fan
    unsigned int count;              //!< Number of fans in unit
} nvmlUnitFanSpeeds_t;

/** @} */

/***************************************************************************************************/
/** @addtogroup nvmlEvents 
 *  @{
 */
/***************************************************************************************************/

/** 
 * Handle to an event set
 */
typedef struct nvmlEventSet_st* nvmlEventSet_t;

/** @defgroup nvmlEventType Event Types
 * @{
 * Event Types which user can be notified about.
 * See description of particular functions for details.
 *
 * See \ref nvmlDeviceRegisterEvents and \ref nvmlDeviceGetSupportedEventTypes to check which devices 
 * support each event.
 *
 * Types can be combined with bitwise or operator '|' when passed to \ref nvmlDeviceRegisterEvents
 */
//! Event about single bit ECC errors
/**
 * \note A corrected texture memory error is not an ECC error, so it does not generate a single bit event
 */
#define nvmlEventTypeSingleBitEccError     0x0000000000000001LL

//! Event about double bit ECC errors
/**
 * \note An uncorrected texture memory error is not an ECC error, so it does not generate a double bit event
 */
#define nvmlEventTypeDoubleBitEccError     0x0000000000000002LL

//! Event about PState changes
/**
 *  \note On Fermi architecture PState changes are also an indicator that GPU is throttling down due to
 *  no work being executed on the GPU, power capping or thermal capping. In a typical situation,
 *  Fermi-based GPU should stay in P0 for the duration of the execution of the compute process.
 */
#define nvmlEventTypePState                0x0000000000000004LL

//! Event that Xid critical error occurred
#define nvmlEventTypeXidCriticalError      0x0000000000000008LL

//! Event about clock changes
/**
 * Kepler only
 */
#define nvmlEventTypeClock                 0x0000000000000010LL

//! Mask with no events
#define nvmlEventTypeNone                  0x0000000000000000LL
//! Mask of all events
#define nvmlEventTypeAll (nvmlEventTypeNone    \
        | nvmlEventTypeSingleBitEccError       \
        | nvmlEventTypeDoubleBitEccError       \
        | nvmlEventTypePState                  \
        | nvmlEventTypeClock                   \
        | nvmlEventTypeXidCriticalError        \
        )
/** @} */

/** 
 * Information about occurred event
 */
typedef struct nvmlEventData_st
{
    nvmlDevice_t        device;         //!< Specific device where the event occurred
    unsigned long long  eventType;      //!< Information about what specific event occurred
    unsigned long long  eventData;      //!< Stores last XID error for the device in the event of nvmlEventTypeXidCriticalError, 
                                        //  eventData is 0 for any other event. eventData is set as 999 for unknown xid error.
} nvmlEventData_t;

/** @} */

/***************************************************************************************************/
/** @addtogroup nvmlClocksThrottleReasons
 *  @{
 */
/***************************************************************************************************/

/** Nothing is running on the GPU and the clocks are dropping to Idle state
 * \note This limiter may be removed in a later release
 */
#define nvmlClocksThrottleReasonGpuIdle                   0x0000000000000001LL

/** GPU clocks are limited by current setting of applications clocks
 *
 * @see nvmlDeviceSetApplicationsClocks
 * @see nvmlDeviceGetApplicationsClock
 */
#define nvmlClocksThrottleReasonApplicationsClocksSetting   0x0000000000000002LL

/** 
 * @deprecated Renamed to \ref nvmlClocksThrottleReasonApplicationsClocksSetting 
 *             as the name describes the situation more accurately.
 */
#define nvmlClocksThrottleReasonUserDefinedClocks         nvmlClocksThrottleReasonApplicationsClocksSetting 

/** SW Power Scaling algorithm is reducing the clocks below requested clocks 
 *
 * @see nvmlDeviceGetPowerUsage
 * @see nvmlDeviceSetPowerManagementLimit
 * @see nvmlDeviceGetPowerManagementLimit
 */
#define nvmlClocksThrottleReasonSwPowerCap                0x0000000000000004LL

/** HW Slowdown (reducing the core clocks by a factor of 2 or more) is engaged
 * 
 * This is an indicator of:
 *   - temperature being too high
 *   - External Power Brake Assertion is triggered (e.g. by the system power supply)
 *   - Power draw is too high and Fast Trigger protection is reducing the clocks
 *   - May be also reported during PState or clock change
 *      - This behavior may be removed in a later release.
 *
 * @see nvmlDeviceGetTemperature
 * @see nvmlDeviceGetTemperatureThreshold
 * @see nvmlDeviceGetPowerUsage
 */
#define nvmlClocksThrottleReasonHwSlowdown                0x0000000000000008LL

/** Sync Boost
 *
 * This GPU has been added to a Sync boost group with nvidia-smi or DCGM in
 * order to maximize performance per watt. All GPUs in the sync boost group
 * will boost to the minimum possible clocks across the entire group. Look at
 * the throttle reasons for other GPUs in the system to see why those GPUs are
 * holding this one at lower clocks.
 *
 */
#define nvmlClocksThrottleReasonSyncBoost                 0x0000000000000010LL

/** Some other unspecified factor is reducing the clocks */
#define nvmlClocksThrottleReasonUnknown                   0x8000000000000000LL

/** Bit mask representing no clocks throttling
 *
 * Clocks are as high as possible.
 * */
#define nvmlClocksThrottleReasonNone                      0x0000000000000000LL

/** Bit mask representing all supported clocks throttling reasons 
 * New reasons might be added to this list in the future
 */
#define nvmlClocksThrottleReasonAll (nvmlClocksThrottleReasonNone \
      | nvmlClocksThrottleReasonGpuIdle                           \
      | nvmlClocksThrottleReasonApplicationsClocksSetting         \
      | nvmlClocksThrottleReasonSwPowerCap                        \
      | nvmlClocksThrottleReasonHwSlowdown                        \
      | nvmlClocksThrottleReasonSyncBoost                         \
      | nvmlClocksThrottleReasonUnknown                           \
        ) 
/** @} */

/***************************************************************************************************/
/** @defgroup nvmlAccountingStats Accounting Statistics
 *  @{
 *
 *  Set of APIs designed to provide per process information about usage of GPU.
 *
 *  @note All accounting statistics and accounting mode live in nvidia driver and reset 
 *        to default (Disabled) when driver unloads.
 *        It is advised to run with persistence mode enabled.
 *
 *  @note Enabling accounting mode has no negative impact on the GPU performance.
 */
/***************************************************************************************************/

/**
 * Describes accounting statistics of a process.
 */
typedef struct nvmlAccountingStats_st {
    unsigned int gpuUtilization;                //!< Percent of time over the process's lifetime during which one or more kernels was executing on the GPU.
                                                //! Utilization stats just like returned by \ref nvmlDeviceGetUtilizationRates but for the life time of a
                                                //! process (not just the last sample period).
                                                //! Set to NVML_VALUE_NOT_AVAILABLE if nvmlDeviceGetUtilizationRates is not supported
    
    unsigned int memoryUtilization;             //!< Percent of time over the process's lifetime during which global (device) memory was being read or written.
                                                //! Set to NVML_VALUE_NOT_AVAILABLE if nvmlDeviceGetUtilizationRates is not supported
    
    unsigned long long maxMemoryUsage;          //!< Maximum total memory in bytes that was ever allocated by the process.
                                                //! Set to NVML_VALUE_NOT_AVAILABLE if nvmlProcessInfo_t->usedGpuMemory is not supported
    

    unsigned long long time;                    //!< Amount of time in ms during which the compute context was active. The time is reported as 0 if 
                                                //!< the process is not terminated
    
    unsigned long long startTime;               //!< CPU Timestamp in usec representing start time for the process
    
    unsigned int isRunning;                     //!< Flag to represent if the process is running (1 for running, 0 for terminated)

    unsigned int reserved[5];                   //!< Reserved for future use
} nvmlAccountingStats_t;

/** @} */

/***************************************************************************************************/
/** @defgroup nvmlVgpuConstants Vgpu Constants
 *  @{
 */
/***************************************************************************************************/

/**
 * Buffer size guaranteed to be large enough for \ref nvmlVgpuTypeGetLicense
 */
#define NVML_GRID_LICENSE_BUFFER_SIZE       128

#define NVML_VGPU_NAME_BUFFER_SIZE          64

#define NVML_MAX_VGPU_TYPES_PER_PGPU        17

#define NVML_MAX_VGPU_INSTANCES_PER_PGPU    24

#define NVML_GRID_LICENSE_FEATURE_MAX_COUNT 3

#define NVML_GRID_LICENSE_INFO_MAX_LENGTH   128

/** @} */

/***************************************************************************************************/
/** @defgroup nvmlVgpuEnum Vgpu Enum
 *  @{
 */
/***************************************************************************************************/

/*!
 * Types of VM identifiers
 */
typedef enum nvmlVgpuVmIdType {
    NVML_VGPU_VM_ID_DOMAIN_ID = 0, //!< VM ID represents DOMAIN ID
    NVML_VGPU_VM_ID_UUID = 1,      //!< VM ID represents UUID
} nvmlVgpuVmIdType_t;

// vGPU GUEST info state.
typedef enum nvmlVgpuGuestInfoState_enum
{
    NVML_VGPU_INSTANCE_GUEST_INFO_STATE_UNINITIALIZED = 0,  //<! Guest-dependent fields uninitialized
    NVML_VGPU_INSTANCE_GUEST_INFO_STATE_INITIALIZED   = 1,  //<! Guest-dependent fields initialized
} nvmlVgpuGuestInfoState_t;

// GRID license feature code
typedef enum {
    NVML_GRID_LICENSE_FEATURE_CODE_VGPU = 1,         // Virtual GPU
    NVML_GRID_LICENSE_FEATURE_CODE_VWORKSTATION = 2  // Virtual Workstation
} nvmlGridLicenseFeatureCode_t;

/** @} */

/***************************************************************************************************/
/** @defgroup nvmlVgpuStructs Vgpu Structs
 *  @{
 */
/***************************************************************************************************/

typedef unsigned int nvmlVgpuTypeId_t;

typedef unsigned int nvmlVgpuInstance_t;

/**
 * Structure to store Utilization Value and vgpuInstance
 */
typedef struct nvmlVgpuInstanceUtilizationSample_st
{
    nvmlVgpuInstance_t vgpuInstance;    //!< vGPU Instance
    unsigned long long timeStamp;       //!< CPU Timestamp in microseconds
    nvmlValue_t smUtil;                 //!< SM (3D/Compute) Util Value
    nvmlValue_t memUtil;                //!< Frame Buffer Memory Util Value
    nvmlValue_t encUtil;                //!< Encoder Util Value
    nvmlValue_t decUtil;                //!< Decoder Util Value
} nvmlVgpuInstanceUtilizationSample_t;

/**
 * Structure to store GRID licensable features
 */
typedef struct nvmlGridLicensableFeature_st
{
    nvmlGridLicenseFeatureCode_t    featureCode;         //<! Licensed feature code
    unsigned int                    featureState;        //<! Non-zero if feature is currently licensed, otherwise zero
    char                            licenseInfo[NVML_GRID_LICENSE_INFO_MAX_LENGTH];
} nvmlGridLicensableFeature_t;

typedef struct nvmlGridLicensableFeatures_st
{
    int                         isGridLicenseSupported;     //<! Non-zero if GRID Software Licensing is supported on the system, otherwise zero
    unsigned int                licensableFeaturesCount;    //<! Entries returned in \a gridLicensableFeatures array
    nvmlGridLicensableFeature_t gridLicensableFeatures[NVML_GRID_LICENSE_FEATURE_MAX_COUNT];
} nvmlGridLicensableFeatures_t;

/** @} */

/***************************************************************************************************/
/** @defgroup nvmlInitializationAndCleanup Initialization and Cleanup
 * This chapter describes the methods that handle NVML initialization and cleanup.
 * It is the user's responsibility to call \ref nvmlInit() before calling any other methods, and 
 * nvmlShutdown() once NVML is no longer being used.
 *  @{
 */
/***************************************************************************************************/

/**
 * Initialize NVML, but don't initialize any GPUs yet.
 *
 * \note In NVML 5.319 new nvmlInit_v2 has replaced nvmlInit"_v1" (default in NVML 4.304 and older) that
 *       did initialize all GPU devices in the system.
 *       
 * This allows NVML to communicate with a GPU
 * when other GPUs in the system are unstable or in a bad state.  When using this API, GPUs are
 * discovered and initialized in nvmlDeviceGetHandleBy* functions instead.
 * 
 * \note To contrast nvmlInit_v2 with nvmlInit"_v1", NVML 4.304 nvmlInit"_v1" will fail when any detected GPU is in
 *       a bad or unstable state.
 * 
 * For all products.
 *
 * This method, should be called once before invoking any other methods in the library.
 * A reference count of the number of initializations is maintained.  Shutdown only occurs
 * when the reference count reaches zero.
 * 
 * @return 
 *         - \ref NVML_SUCCESS                   if NVML has been properly initialized
 *         - \ref NVML_ERROR_DRIVER_NOT_LOADED   if NVIDIA driver is not running
 *         - \ref NVML_ERROR_NO_PERMISSION       if NVML does not have permission to talk to the driver
 *         - \ref NVML_ERROR_UNKNOWN             on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlInit(void);

/**
 * Shut down NVML by releasing all GPU resources previously allocated with \ref nvmlInit().
 * 
 * For all products.
 *
 * This method should be called after NVML work is done, once for each call to \ref nvmlInit()
 * A reference count of the number of initializations is maintained.  Shutdown only occurs
 * when the reference count reaches zero.  For backwards compatibility, no error is reported if
 * nvmlShutdown() is called more times than nvmlInit().
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if NVML has been properly shut down
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlShutdown(void);

/** @} */

/***************************************************************************************************/
/** @defgroup nvmlErrorReporting Error reporting
 * This chapter describes helper functions for error reporting routines.
 *  @{
 */
/***************************************************************************************************/

/**
 * Helper method for converting NVML error codes into readable strings.
 *
 * For all products.
 *
 * @param result                               NVML error code to convert
 *
 * @return String representation of the error.
 *
 */
const DECLDIR char* nvmlErrorString(nvmlReturn_t result);
/** @} */


/***************************************************************************************************/
/** @defgroup nvmlConstants Constants
 *  @{
 */
/***************************************************************************************************/

/**
 * Buffer size guaranteed to be large enough for \ref nvmlDeviceGetInforomVersion and \ref nvmlDeviceGetInforomImageVersion
 */
#define NVML_DEVICE_INFOROM_VERSION_BUFFER_SIZE       16

/**
 * Buffer size guaranteed to be large enough for \ref nvmlDeviceGetUUID
 */
#define NVML_DEVICE_UUID_BUFFER_SIZE                  80

/**
 * Buffer size guaranteed to be large enough for \ref nvmlDeviceGetBoardPartNumber
 */
#define NVML_DEVICE_PART_NUMBER_BUFFER_SIZE           80

/**
 * Buffer size guaranteed to be large enough for \ref nvmlSystemGetDriverVersion
 */
#define NVML_SYSTEM_DRIVER_VERSION_BUFFER_SIZE        80

/**
 * Buffer size guaranteed to be large enough for \ref nvmlSystemGetNVMLVersion
 */
#define NVML_SYSTEM_NVML_VERSION_BUFFER_SIZE          80

/**
 * Buffer size guaranteed to be large enough for \ref nvmlDeviceGetName
 */
#define NVML_DEVICE_NAME_BUFFER_SIZE                  64

/**
 * Buffer size guaranteed to be large enough for \ref nvmlDeviceGetSerial
 */
#define NVML_DEVICE_SERIAL_BUFFER_SIZE                30

/**
 * Buffer size guaranteed to be large enough for \ref nvmlDeviceGetVbiosVersion
 */
#define NVML_DEVICE_VBIOS_VERSION_BUFFER_SIZE         32

/** @} */

/***************************************************************************************************/
/** @defgroup nvmlSystemQueries System Queries
 * This chapter describes the queries that NVML can perform against the local system. These queries
 * are not device-specific.
 *  @{
 */
/***************************************************************************************************/

/**
 * Retrieves the version of the system's graphics driver.
 * 
 * For all products.
 *
 * The version identifier is an alphanumeric string.  It will not exceed 80 characters in length
 * (including the NULL terminator).  See \ref nvmlConstants::NVML_SYSTEM_DRIVER_VERSION_BUFFER_SIZE.
 *
 * @param version                              Reference in which to return the version identifier
 * @param length                               The maximum allowed length of the string returned in \a version
 *
 * @return 
 *         - \ref NVML_SUCCESS                 if \a version has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a version is NULL
 *         - \ref NVML_ERROR_INSUFFICIENT_SIZE if \a length is too small 
 */
nvmlReturn_t DECLDIR nvmlSystemGetDriverVersion(char *version, unsigned int length);

/**
 * Retrieves the version of the NVML library.
 * 
 * For all products.
 *
 * The version identifier is an alphanumeric string.  It will not exceed 80 characters in length
 * (including the NULL terminator).  See \ref nvmlConstants::NVML_SYSTEM_NVML_VERSION_BUFFER_SIZE.
 *
 * @param version                              Reference in which to return the version identifier
 * @param length                               The maximum allowed length of the string returned in \a version
 *
 * @return 
 *         - \ref NVML_SUCCESS                 if \a version has been set
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a version is NULL
 *         - \ref NVML_ERROR_INSUFFICIENT_SIZE if \a length is too small 
 */
nvmlReturn_t DECLDIR nvmlSystemGetNVMLVersion(char *version, unsigned int length);

/**
 * Retrieves the version of the CUDA driver.
 *
 * For all products.
 *
 * The returned CUDA driver version is the same as the CUDA API
 * cuDriverGetVersion() would return on the system.
 *
 * @param cudaDriverVersion                    Reference in which to return the version identifier
 *
 * @return
 *         - \ref NVML_SUCCESS                 if \a cudaDriverVersion has been set
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a cudaDriverVersion is NULL
 */
nvmlReturn_t DECLDIR nvmlSystemGetCudaDriverVersion(int *cudaDriverVersion);

/**
 * Gets name of the process with provided process id
 *
 * For all products.
 *
 * Returned process name is cropped to provided length.
 * name string is encoded in ANSI.
 *
 * @param pid                                  The identifier of the process
 * @param name                                 Reference in which to return the process name
 * @param length                               The maximum allowed length of the string returned in \a name
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a name has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a name is NULL or \a length is 0.
 *         - \ref NVML_ERROR_NOT_FOUND         if process doesn't exists
 *         - \ref NVML_ERROR_NO_PERMISSION     if the user doesn't have permission to perform this operation
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlSystemGetProcessName(unsigned int pid, char *name, unsigned int length);

/** @} */

/***************************************************************************************************/
/** @defgroup nvmlUnitQueries Unit Queries
 * This chapter describes that queries that NVML can perform against each unit. For S-class systems only.
 * In each case the device is identified with an nvmlUnit_t handle. This handle is obtained by 
 * calling \ref nvmlUnitGetHandleByIndex().
 *  @{
 */
/***************************************************************************************************/

 /**
 * Retrieves the number of units in the system.
 *
 * For S-class products.
 *
 * @param unitCount                            Reference in which to return the number of units
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a unitCount has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a unitCount is NULL
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlUnitGetCount(unsigned int *unitCount);

/**
 * Acquire the handle for a particular unit, based on its index.
 *
 * For S-class products.
 *
 * Valid indices are derived from the \a unitCount returned by \ref nvmlUnitGetCount(). 
 *   For example, if \a unitCount is 2 the valid indices are 0 and 1, corresponding to UNIT 0 and UNIT 1.
 *
 * The order in which NVML enumerates units has no guarantees of consistency between reboots.
 *
 * @param index                                The index of the target unit, >= 0 and < \a unitCount
 * @param unit                                 Reference in which to return the unit handle
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a unit has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a index is invalid or \a unit is NULL
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlUnitGetHandleByIndex(unsigned int index, nvmlUnit_t *unit);

/**
 * Retrieves the static information associated with a unit.
 *
 * For S-class products.
 *
 * See \ref nvmlUnitInfo_t for details on available unit info.
 *
 * @param unit                                 The identifier of the target unit
 * @param info                                 Reference in which to return the unit information
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a info has been populated
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a unit is invalid or \a info is NULL
 */
nvmlReturn_t DECLDIR nvmlUnitGetUnitInfo(nvmlUnit_t unit, nvmlUnitInfo_t *info);

/**
 * Retrieves the LED state associated with this unit.
 *
 * For S-class products.
 *
 * See \ref nvmlLedState_t for details on allowed states.
 *
 * @param unit                                 The identifier of the target unit
 * @param state                                Reference in which to return the current LED state
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a state has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a unit is invalid or \a state is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if this is not an S-class product
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 * 
 * @see nvmlUnitSetLedState()
 */
nvmlReturn_t DECLDIR nvmlUnitGetLedState(nvmlUnit_t unit, nvmlLedState_t *state);

/**
 * Retrieves the PSU stats for the unit.
 *
 * For S-class products.
 *
 * See \ref nvmlPSUInfo_t for details on available PSU info.
 *
 * @param unit                                 The identifier of the target unit
 * @param psu                                  Reference in which to return the PSU information
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a psu has been populated
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a unit is invalid or \a psu is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if this is not an S-class product
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlUnitGetPsuInfo(nvmlUnit_t unit, nvmlPSUInfo_t *psu);

/**
 * Retrieves the temperature readings for the unit, in degrees C.
 *
 * For S-class products.
 *
 * Depending on the product, readings may be available for intake (type=0), 
 * exhaust (type=1) and board (type=2).
 *
 * @param unit                                 The identifier of the target unit
 * @param type                                 The type of reading to take
 * @param temp                                 Reference in which to return the intake temperature
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a temp has been populated
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a unit or \a type is invalid or \a temp is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if this is not an S-class product
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlUnitGetTemperature(nvmlUnit_t unit, unsigned int type, unsigned int *temp);

/**
 * Retrieves the fan speed readings for the unit.
 *
 * For S-class products.
 *
 * See \ref nvmlUnitFanSpeeds_t for details on available fan speed info.
 *
 * @param unit                                 The identifier of the target unit
 * @param fanSpeeds                            Reference in which to return the fan speed information
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a fanSpeeds has been populated
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a unit is invalid or \a fanSpeeds is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if this is not an S-class product
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlUnitGetFanSpeedInfo(nvmlUnit_t unit, nvmlUnitFanSpeeds_t *fanSpeeds);

/**
 * Retrieves the set of GPU devices that are attached to the specified unit.
 *
 * For S-class products.
 *
 * The \a deviceCount argument is expected to be set to the size of the input \a devices array.
 *
 * @param unit                                 The identifier of the target unit
 * @param deviceCount                          Reference in which to provide the \a devices array size, and
 *                                             to return the number of attached GPU devices
 * @param devices                              Reference in which to return the references to the attached GPU devices
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a deviceCount and \a devices have been populated
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INSUFFICIENT_SIZE if \a deviceCount indicates that the \a devices array is too small
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a unit is invalid, either of \a deviceCount or \a devices is NULL
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlUnitGetDevices(nvmlUnit_t unit, unsigned int *deviceCount, nvmlDevice_t *devices);

/**
 * Retrieves the IDs and firmware versions for any Host Interface Cards (HICs) in the system.
 * 
 * For S-class products.
 *
 * The \a hwbcCount argument is expected to be set to the size of the input \a hwbcEntries array.
 * The HIC must be connected to an S-class system for it to be reported by this function.
 *
 * @param hwbcCount                            Size of hwbcEntries array
 * @param hwbcEntries                          Array holding information about hwbc
 *
 * @return 
 *         - \ref NVML_SUCCESS                 if \a hwbcCount and \a hwbcEntries have been populated
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if either \a hwbcCount or \a hwbcEntries is NULL
 *         - \ref NVML_ERROR_INSUFFICIENT_SIZE if \a hwbcCount indicates that the \a hwbcEntries array is too small
 */
nvmlReturn_t DECLDIR nvmlSystemGetHicVersion(unsigned int *hwbcCount, nvmlHwbcEntry_t *hwbcEntries);
/** @} */

/***************************************************************************************************/
/** @defgroup nvmlDeviceQueries Device Queries
 * This chapter describes that queries that NVML can perform against each device.
 * In each case the device is identified with an nvmlDevice_t handle. This handle is obtained by  
 * calling one of \ref nvmlDeviceGetHandleByIndex(), \ref nvmlDeviceGetHandleBySerial(),
 * \ref nvmlDeviceGetHandleByPciBusId(). or \ref nvmlDeviceGetHandleByUUID(). 
 *  @{
 */
/***************************************************************************************************/

 /**
 * Retrieves the number of compute devices in the system. A compute device is a single GPU.
 * 
 * For all products.
 *
 * Note: New nvmlDeviceGetCount_v2 (default in NVML 5.319) returns count of all devices in the system
 *       even if nvmlDeviceGetHandleByIndex_v2 returns NVML_ERROR_NO_PERMISSION for such device.
 *       Update your code to handle this error, or use NVML 4.304 or older nvml header file.
 *       For backward binary compatibility reasons _v1 version of the API is still present in the shared
 *       library.
 *       Old _v1 version of nvmlDeviceGetCount doesn't count devices that NVML has no permission to talk to.
 *
 * @param deviceCount                          Reference in which to return the number of accessible devices
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a deviceCount has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a deviceCount is NULL
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetCount(unsigned int *deviceCount);

/**
 * Acquire the handle for a particular device, based on its index.
 * 
 * For all products.
 *
 * Valid indices are derived from the \a accessibleDevices count returned by 
 *   \ref nvmlDeviceGetCount(). For example, if \a accessibleDevices is 2 the valid indices  
 *   are 0 and 1, corresponding to GPU 0 and GPU 1.
 *
 * The order in which NVML enumerates devices has no guarantees of consistency between reboots. For that reason it
 *   is recommended that devices be looked up by their PCI ids or UUID. See 
 *   \ref nvmlDeviceGetHandleByUUID() and \ref nvmlDeviceGetHandleByPciBusId().
 *
 * Note: The NVML index may not correlate with other APIs, such as the CUDA device index.
 *
 * Starting from NVML 5, this API causes NVML to initialize the target GPU
 * NVML may initialize additional GPUs if:
 *  - The target GPU is an SLI slave
 * 
 * Note: New nvmlDeviceGetCount_v2 (default in NVML 5.319) returns count of all devices in the system
 *       even if nvmlDeviceGetHandleByIndex_v2 returns NVML_ERROR_NO_PERMISSION for such device.
 *       Update your code to handle this error, or use NVML 4.304 or older nvml header file.
 *       For backward binary compatibility reasons _v1 version of the API is still present in the shared
 *       library.
 *       Old _v1 version of nvmlDeviceGetCount doesn't count devices that NVML has no permission to talk to.
 *
 *       This means that nvmlDeviceGetHandleByIndex_v2 and _v1 can return different devices for the same index.
 *       If you don't touch macros that map old (_v1) versions to _v2 versions at the top of the file you don't
 *       need to worry about that.
 *
 * @param index                                The index of the target GPU, >= 0 and < \a accessibleDevices
 * @param device                               Reference in which to return the device handle
 * 
 * @return 
 *         - \ref NVML_SUCCESS                  if \a device has been set
 *         - \ref NVML_ERROR_UNINITIALIZED      if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT   if \a index is invalid or \a device is NULL
 *         - \ref NVML_ERROR_INSUFFICIENT_POWER if any attached devices have improperly attached external power cables
 *         - \ref NVML_ERROR_NO_PERMISSION      if the user doesn't have permission to talk to this device
 *         - \ref NVML_ERROR_IRQ_ISSUE          if NVIDIA kernel detected an interrupt issue with the attached GPUs
 *         - \ref NVML_ERROR_GPU_IS_LOST        if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN            on any unexpected error
 *
 * @see nvmlDeviceGetIndex
 * @see nvmlDeviceGetCount
 */
nvmlReturn_t DECLDIR nvmlDeviceGetHandleByIndex(unsigned int index, nvmlDevice_t *device);

/**
 * Acquire the handle for a particular device, based on its board serial number.
 *
 * For Fermi &tm; or newer fully supported devices.
 *
 * This number corresponds to the value printed directly on the board, and to the value returned by
 *   \ref nvmlDeviceGetSerial().
 *
 * @deprecated Since more than one GPU can exist on a single board this function is deprecated in favor 
 *             of \ref nvmlDeviceGetHandleByUUID.
 *             For dual GPU boards this function will return NVML_ERROR_INVALID_ARGUMENT.
 *
 * Starting from NVML 5, this API causes NVML to initialize the target GPU
 * NVML may initialize additional GPUs as it searches for the target GPU
 *
 * @param serial                               The board serial number of the target GPU
 * @param device                               Reference in which to return the device handle
 * 
 * @return 
 *         - \ref NVML_SUCCESS                  if \a device has been set
 *         - \ref NVML_ERROR_UNINITIALIZED      if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT   if \a serial is invalid, \a device is NULL or more than one
 *                                              device has the same serial (dual GPU boards)
 *         - \ref NVML_ERROR_NOT_FOUND          if \a serial does not match a valid device on the system
 *         - \ref NVML_ERROR_INSUFFICIENT_POWER if any attached devices have improperly attached external power cables
 *         - \ref NVML_ERROR_IRQ_ISSUE          if NVIDIA kernel detected an interrupt issue with the attached GPUs
 *         - \ref NVML_ERROR_GPU_IS_LOST        if any GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN            on any unexpected error
 *
 * @see nvmlDeviceGetSerial
 * @see nvmlDeviceGetHandleByUUID
 */
nvmlReturn_t DECLDIR nvmlDeviceGetHandleBySerial(const char *serial, nvmlDevice_t *device);

/**
 * Acquire the handle for a particular device, based on its globally unique immutable UUID associated with each device.
 *
 * For all products.
 *
 * @param uuid                                 The UUID of the target GPU
 * @param device                               Reference in which to return the device handle
 * 
 * Starting from NVML 5, this API causes NVML to initialize the target GPU
 * NVML may initialize additional GPUs as it searches for the target GPU
 *
 * @return 
 *         - \ref NVML_SUCCESS                  if \a device has been set
 *         - \ref NVML_ERROR_UNINITIALIZED      if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT   if \a uuid is invalid or \a device is null
 *         - \ref NVML_ERROR_NOT_FOUND          if \a uuid does not match a valid device on the system
 *         - \ref NVML_ERROR_INSUFFICIENT_POWER if any attached devices have improperly attached external power cables
 *         - \ref NVML_ERROR_IRQ_ISSUE          if NVIDIA kernel detected an interrupt issue with the attached GPUs
 *         - \ref NVML_ERROR_GPU_IS_LOST        if any GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN            on any unexpected error
 *
 * @see nvmlDeviceGetUUID
 */
nvmlReturn_t DECLDIR nvmlDeviceGetHandleByUUID(const char *uuid, nvmlDevice_t *device);

/**
 * Acquire the handle for a particular device, based on its PCI bus id.
 * 
 * For all products.
 *
 * This value corresponds to the nvmlPciInfo_t::busId returned by \ref nvmlDeviceGetPciInfo().
 *
 * Starting from NVML 5, this API causes NVML to initialize the target GPU
 * NVML may initialize additional GPUs if:
 *  - The target GPU is an SLI slave
 *
 * \note NVML 4.304 and older version of nvmlDeviceGetHandleByPciBusId"_v1" returns NVML_ERROR_NOT_FOUND 
 *       instead of NVML_ERROR_NO_PERMISSION.
 *
 * @param pciBusId                             The PCI bus id of the target GPU
 * @param device                               Reference in which to return the device handle
 * 
 * @return 
 *         - \ref NVML_SUCCESS                  if \a device has been set
 *         - \ref NVML_ERROR_UNINITIALIZED      if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT   if \a pciBusId is invalid or \a device is NULL
 *         - \ref NVML_ERROR_NOT_FOUND          if \a pciBusId does not match a valid device on the system
 *         - \ref NVML_ERROR_INSUFFICIENT_POWER if the attached device has improperly attached external power cables
 *         - \ref NVML_ERROR_NO_PERMISSION      if the user doesn't have permission to talk to this device
 *         - \ref NVML_ERROR_IRQ_ISSUE          if NVIDIA kernel detected an interrupt issue with the attached GPUs
 *         - \ref NVML_ERROR_GPU_IS_LOST        if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN            on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetHandleByPciBusId(const char *pciBusId, nvmlDevice_t *device);

/**
 * Retrieves the name of this device. 
 * 
 * For all products.
 *
 * The name is an alphanumeric string that denotes a particular product, e.g. Tesla &tm; C2070. It will not
 * exceed 64 characters in length (including the NULL terminator).  See \ref
 * nvmlConstants::NVML_DEVICE_NAME_BUFFER_SIZE.
 *
 * @param device                               The identifier of the target device
 * @param name                                 Reference in which to return the product name
 * @param length                               The maximum allowed length of the string returned in \a name
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a name has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid, or \a name is NULL
 *         - \ref NVML_ERROR_INSUFFICIENT_SIZE if \a length is too small
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetName(nvmlDevice_t device, char *name, unsigned int length);

/**
 * Retrieves the brand of this device.
 *
 * For all products.
 *
 * The type is a member of \ref nvmlBrandType_t defined above.
 *
 * @param device                               The identifier of the target device
 * @param type                                 Reference in which to return the product brand type
 *
 * @return
 *         - \ref NVML_SUCCESS                 if \a name has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid, or \a type is NULL
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetBrand(nvmlDevice_t device, nvmlBrandType_t *type);

/**
 * Retrieves the NVML index of this device.
 *
 * For all products.
 * 
 * Valid indices are derived from the \a accessibleDevices count returned by 
 *   \ref nvmlDeviceGetCount(). For example, if \a accessibleDevices is 2 the valid indices  
 *   are 0 and 1, corresponding to GPU 0 and GPU 1.
 *
 * The order in which NVML enumerates devices has no guarantees of consistency between reboots. For that reason it
 *   is recommended that devices be looked up by their PCI ids or GPU UUID. See 
 *   \ref nvmlDeviceGetHandleByPciBusId() and \ref nvmlDeviceGetHandleByUUID().
 *
 * Note: The NVML index may not correlate with other APIs, such as the CUDA device index.
 *
 * @param device                               The identifier of the target device
 * @param index                                Reference in which to return the NVML index of the device
 *
 * @return 
 *         - \ref NVML_SUCCESS                 if \a index has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid, or \a index is NULL
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 * @see nvmlDeviceGetHandleByIndex()
 * @see nvmlDeviceGetCount()
 */
nvmlReturn_t DECLDIR nvmlDeviceGetIndex(nvmlDevice_t device, unsigned int *index);

/**
 * Retrieves the globally unique board serial number associated with this device's board.
 *
 * For all products with an inforom.
 *
 * The serial number is an alphanumeric string that will not exceed 30 characters (including the NULL terminator).
 * This number matches the serial number tag that is physically attached to the board.  See \ref
 * nvmlConstants::NVML_DEVICE_SERIAL_BUFFER_SIZE.
 *
 * @param device                               The identifier of the target device
 * @param serial                               Reference in which to return the board/module serial number
 * @param length                               The maximum allowed length of the string returned in \a serial
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a serial has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid, or \a serial is NULL
 *         - \ref NVML_ERROR_INSUFFICIENT_SIZE if \a length is too small
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetSerial(nvmlDevice_t device, char *serial, unsigned int length);

/**
 * Retrieves an array of unsigned ints (sized to cpuSetSize) of bitmasks with the ideal CPU affinity for the device
 * For example, if processors 0, 1, 32, and 33 are ideal for the device and cpuSetSize == 2,
 *     result[0] = 0x3, result[1] = 0x3
 *
 * For Kepler &tm; or newer fully supported devices.
 * Supported on Linux only.
 *
 * @param device                               The identifier of the target device
 * @param cpuSetSize                           The size of the cpuSet array that is safe to access
 * @param cpuSet                               Array reference in which to return a bitmask of CPUs, 64 CPUs per 
 *                                                 unsigned long on 64-bit machines, 32 on 32-bit machines
 *
 * @return 
 *         - \ref NVML_SUCCESS                 if \a cpuAffinity has been filled
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid, cpuSetSize == 0, or cpuSet is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetCpuAffinity(nvmlDevice_t device, unsigned int cpuSetSize, unsigned long *cpuSet);

/**
 * Sets the ideal affinity for the calling thread and device using the guidelines 
 * given in nvmlDeviceGetCpuAffinity().  Note, this is a change as of version 8.0.  
 * Older versions set the affinity for a calling process and all children.
 * Currently supports up to 64 processors.
 *
 * For Kepler &tm; or newer fully supported devices.
 * Supported on Linux only.
 *
 * @param device                               The identifier of the target device
 *
 * @return 
 *         - \ref NVML_SUCCESS                 if the calling process has been successfully bound
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceSetCpuAffinity(nvmlDevice_t device);

/**
 * Clear all affinity bindings for the calling thread.  Note, this is a change as of version
 * 8.0 as older versions cleared the affinity for a calling process and all children.
 *
 * For Kepler &tm; or newer fully supported devices.
 * Supported on Linux only.
 *
 * @param device                               The identifier of the target device
 *
 * @return 
 *         - \ref NVML_SUCCESS                 if the calling process has been successfully unbound
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceClearCpuAffinity(nvmlDevice_t device);

/**
 * Retrieve the common ancestor for two devices
 * For all products.
 * Supported on Linux only.
 *
 * @param device1                              The identifier of the first device
 * @param device2                              The identifier of the second device
 * @param pathInfo                             A \ref nvmlGpuTopologyLevel_t that gives the path type
 *
 * @return
 *         - \ref NVML_SUCCESS                 if \a pathInfo has been set
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device1, or \a device2 is invalid, or \a pathInfo is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device or OS does not support this feature
 *         - \ref NVML_ERROR_UNKNOWN           an error has occurred in underlying topology discovery
 */
nvmlReturn_t DECLDIR nvmlDeviceGetTopologyCommonAncestor(nvmlDevice_t device1, nvmlDevice_t device2, nvmlGpuTopologyLevel_t *pathInfo);

/**
 * Retrieve the set of GPUs that are nearest to a given device at a specific interconnectivity level
 * For all products.
 * Supported on Linux only.
 *
 * @param device                               The identifier of the first device
 * @param level                                The \ref nvmlGpuTopologyLevel_t level to search for other GPUs
 * @param count                                When zero, is set to the number of matching GPUs such that \a deviceArray 
 *                                             can be malloc'd.  When non-zero, \a deviceArray will be filled with \a count
 *                                             number of device handles.
 * @param deviceArray                          An array of device handles for GPUs found at \a level
 *
 * @return
 *         - \ref NVML_SUCCESS                 if \a deviceArray or \a count (if initially zero) has been set
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device, \a level, or \a count is invalid, or \a deviceArray is NULL with a non-zero \a count
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device or OS does not support this feature
 *         - \ref NVML_ERROR_UNKNOWN           an error has occurred in underlying topology discovery
 */
nvmlReturn_t DECLDIR nvmlDeviceGetTopologyNearestGpus(nvmlDevice_t device, nvmlGpuTopologyLevel_t level, unsigned int *count, nvmlDevice_t *deviceArray);

/**
 * Retrieve the set of GPUs that have a CPU affinity with the given CPU number
 * For all products.
 * Supported on Linux only.
 *
 * @param cpuNumber                            The CPU number
 * @param count                                When zero, is set to the number of matching GPUs such that \a deviceArray 
 *                                             can be malloc'd.  When non-zero, \a deviceArray will be filled with \a count
 *                                             number of device handles.
 * @param deviceArray                          An array of device handles for GPUs found with affinity to \a cpuNumber
 *
 * @return
 *         - \ref NVML_SUCCESS                 if \a deviceArray or \a count (if initially zero) has been set
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a cpuNumber, or \a count is invalid, or \a deviceArray is NULL with a non-zero \a count
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device or OS does not support this feature
 *         - \ref NVML_ERROR_UNKNOWN           an error has occurred in underlying topology discovery
 */
nvmlReturn_t DECLDIR nvmlSystemGetTopologyGpuSet(unsigned int cpuNumber, unsigned int *count, nvmlDevice_t *deviceArray);

/**
 * Retrieve the status for a given p2p capability index between a given pair of GPU 
 * 
 * @param device1                              The first device 
 * @param device2                              The second device
 * @param p2pIndex                             p2p Capability Index being looked for between \a device1 and \a device2
 * @param p2pStatus                            Reference in which to return the status of the \a p2pIndex 
 *                                             between \a device1 and \a device2
 * @return 
 *         - \ref NVML_SUCCESS         if \a p2pStatus has been populated
 *         - \ref NVML_ERROR_INVALID_ARGUMENT     if \a device1 or \a device2 or \a p2pIndex is invalid or \a p2pStatus is NULL
 *         - \ref NVML_ERROR_UNKNOWN              on any unexpected error
 */ 
nvmlReturn_t DECLDIR nvmlDeviceGetP2PStatus(nvmlDevice_t device1, nvmlDevice_t device2, nvmlGpuP2PCapsIndex_t p2pIndex,nvmlGpuP2PStatus_t *p2pStatus);

/**
 * Retrieves the XID Error List reported by RM on a per GPU basis
 * 
 * @param device                               The device being queried
 * @param xidData                              The list of the actual XID Error numbers and timestamps
 *   
 *
 * @return 
 *         - \ref NVML_SUCCESS                 if the xidCount or xidErrorList have been populated
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if the device is invalid
 *         - \ref NVML_ERROR_UNKNOWN              on any unexpected error
 */ 
nvmlReturn_t DECLDIR nvmlDeviceGetXidErrors(nvmlDevice_t device, nvmlXidData_t *xidData);


/**
 * Retrieves the globally unique immutable UUID associated with this device, as a 5 part hexadecimal string,
 * that augments the immutable, board serial identifier.
 *
 * For all products.
 *
 * The UUID is a globally unique identifier. It is the only available identifier for pre-Fermi-architecture products.
 * It does NOT correspond to any identifier printed on the board.  It will not exceed 80 characters in length
 * (including the NULL terminator).  See \ref nvmlConstants::NVML_DEVICE_UUID_BUFFER_SIZE.
 *
 * @param device                               The identifier of the target device
 * @param uuid                                 Reference in which to return the GPU UUID
 * @param length                               The maximum allowed length of the string returned in \a uuid
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a uuid has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid, or \a uuid is NULL
 *         - \ref NVML_ERROR_INSUFFICIENT_SIZE if \a length is too small 
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetUUID(nvmlDevice_t device, char *uuid, unsigned int length);

/**
 * Retrieves minor number for the device. The minor number for the device is such that the Nvidia device node file for 
 * each GPU will have the form /dev/nvidia[minor number].
 *
 * For all products.
 * Supported only for Linux
 *
 * @param device                                The identifier of the target device
 * @param minorNumber                           Reference in which to return the minor number for the device
 * @return
 *         - \ref NVML_SUCCESS                 if the minor number is successfully retrieved
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a minorNumber is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if this query is not supported by the device
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetMinorNumber(nvmlDevice_t device, unsigned int *minorNumber);

/**
 * Retrieves the the device board part number which is programmed into the board's InfoROM
 *
 * For all products.
 *
 * @param device                                Identifier of the target device
 * @param partNumber                            Reference to the buffer to return
 * @param length                                Length of the buffer reference
 *
 * @return
 *         - \ref NVML_SUCCESS                  if \a partNumber has been set
 *         - \ref NVML_ERROR_UNINITIALIZED      if the library has not been successfully initialized
 *         - \ref NVML_ERROR_NOT_SUPPORTED      if the needed VBIOS fields have not been filled
 *         - \ref NVML_ERROR_INVALID_ARGUMENT   if \a device is invalid or \a serial is NULL
 *         - \ref NVML_ERROR_GPU_IS_LOST        if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN            on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetBoardPartNumber(nvmlDevice_t device, char* partNumber, unsigned int length);

/**
 * Retrieves the version information for the device's infoROM object.
 *
 * For all products with an inforom.
 *
 * Fermi and higher parts have non-volatile on-board memory for persisting device info, such as aggregate 
 * ECC counts. The version of the data structures in this memory may change from time to time. It will not
 * exceed 16 characters in length (including the NULL terminator).
 * See \ref nvmlConstants::NVML_DEVICE_INFOROM_VERSION_BUFFER_SIZE.
 *
 * See \ref nvmlInforomObject_t for details on the available infoROM objects.
 *
 * @param device                               The identifier of the target device
 * @param object                               The target infoROM object
 * @param version                              Reference in which to return the infoROM version
 * @param length                               The maximum allowed length of the string returned in \a version
 *
 * @return 
 *         - \ref NVML_SUCCESS                 if \a version has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a version is NULL
 *         - \ref NVML_ERROR_INSUFFICIENT_SIZE if \a length is too small 
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not have an infoROM
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 * @see nvmlDeviceGetInforomImageVersion
 */
nvmlReturn_t DECLDIR nvmlDeviceGetInforomVersion(nvmlDevice_t device, nvmlInforomObject_t object, char *version, unsigned int length);

/**
 * Retrieves the global infoROM image version
 *
 * For all products with an inforom.
 *
 * Image version just like VBIOS version uniquely describes the exact version of the infoROM flashed on the board 
 * in contrast to infoROM object version which is only an indicator of supported features.
 * Version string will not exceed 16 characters in length (including the NULL terminator).
 * See \ref nvmlConstants::NVML_DEVICE_INFOROM_VERSION_BUFFER_SIZE.
 *
 * @param device                               The identifier of the target device
 * @param version                              Reference in which to return the infoROM image version
 * @param length                               The maximum allowed length of the string returned in \a version
 *
 * @return 
 *         - \ref NVML_SUCCESS                 if \a version has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a version is NULL
 *         - \ref NVML_ERROR_INSUFFICIENT_SIZE if \a length is too small 
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not have an infoROM
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 * @see nvmlDeviceGetInforomVersion
 */
nvmlReturn_t DECLDIR nvmlDeviceGetInforomImageVersion(nvmlDevice_t device, char *version, unsigned int length);

/**
 * Retrieves the checksum of the configuration stored in the device's infoROM.
 *
 * For all products with an inforom.
 *
 * Can be used to make sure that two GPUs have the exact same configuration.
 * Current checksum takes into account configuration stored in PWR and ECC infoROM objects.
 * Checksum can change between driver releases or when user changes configuration (e.g. disable/enable ECC)
 *
 * @param device                               The identifier of the target device
 * @param checksum                             Reference in which to return the infoROM configuration checksum
 *
 * @return 
 *         - \ref NVML_SUCCESS                 if \a checksum has been set
 *         - \ref NVML_ERROR_CORRUPTED_INFOROM if the device's checksum couldn't be retrieved due to infoROM corruption
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a checksum is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error 
 */
nvmlReturn_t DECLDIR nvmlDeviceGetInforomConfigurationChecksum(nvmlDevice_t device, unsigned int *checksum);

/**
 * Reads the infoROM from the flash and verifies the checksums.
 *
 * For all products with an inforom.
 *
 * @param device                               The identifier of the target device
 *
 * @return 
 *         - \ref NVML_SUCCESS                 if infoROM is not corrupted
 *         - \ref NVML_ERROR_CORRUPTED_INFOROM if the device's infoROM is corrupted
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error 
 */
nvmlReturn_t DECLDIR nvmlDeviceValidateInforom(nvmlDevice_t device);

/**
 * Retrieves the display mode for the device.
 *
 * For all products.
 *
 * This method indicates whether a physical display (e.g. monitor) is currently connected to
 * any of the device's connectors.
 *
 * See \ref nvmlEnableState_t for details on allowed modes.
 *
 * @param device                               The identifier of the target device
 * @param display                              Reference in which to return the display mode
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a display has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a display is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetDisplayMode(nvmlDevice_t device, nvmlEnableState_t *display);

/**
 * Retrieves the display active state for the device.
 *
 * For all products.
 *
 * This method indicates whether a display is initialized on the device.
 * For example whether X Server is attached to this device and has allocated memory for the screen.
 *
 * Display can be active even when no monitor is physically attached.
 *
 * See \ref nvmlEnableState_t for details on allowed modes.
 *
 * @param device                               The identifier of the target device
 * @param isActive                             Reference in which to return the display active state
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a isActive has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a isActive is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetDisplayActive(nvmlDevice_t device, nvmlEnableState_t *isActive);

/**
 * Retrieves the persistence mode associated with this device.
 *
 * For all products.
 * For Linux only.
 *
 * When driver persistence mode is enabled the driver software state is not torn down when the last 
 * client disconnects. By default this feature is disabled. 
 *
 * See \ref nvmlEnableState_t for details on allowed modes.
 *
 * @param device                               The identifier of the target device
 * @param mode                                 Reference in which to return the current driver persistence mode
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a mode has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a mode is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 * @see nvmlDeviceSetPersistenceMode()
 */
nvmlReturn_t DECLDIR nvmlDeviceGetPersistenceMode(nvmlDevice_t device, nvmlEnableState_t *mode);

/**
 * Retrieves the PCI attributes of this device.
 * 
 * For all products.
 *
 * See \ref nvmlPciInfo_t for details on the available PCI info.
 *
 * @param device                               The identifier of the target device
 * @param pci                                  Reference in which to return the PCI info
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a pci has been populated
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a pci is NULL
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetPciInfo(nvmlDevice_t device, nvmlPciInfo_t *pci);

/**
 * Retrieves the maximum PCIe link generation possible with this device and system
 *
 * I.E. for a generation 2 PCIe device attached to a generation 1 PCIe bus the max link generation this function will
 * report is generation 1.
 * 
 * For Fermi &tm; or newer fully supported devices.
 * 
 * @param device                               The identifier of the target device
 * @param maxLinkGen                           Reference in which to return the max PCIe link generation
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a maxLinkGen has been populated
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a maxLinkGen is null
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if PCIe link information is not available
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetMaxPcieLinkGeneration(nvmlDevice_t device, unsigned int *maxLinkGen);

/**
 * Retrieves the maximum PCIe link width possible with this device and system
 *
 * I.E. for a device with a 16x PCIe bus width attached to a 8x PCIe system bus this function will report
 * a max link width of 8.
 * 
 * For Fermi &tm; or newer fully supported devices.
 * 
 * @param device                               The identifier of the target device
 * @param maxLinkWidth                         Reference in which to return the max PCIe link generation
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a maxLinkWidth has been populated
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a maxLinkWidth is null
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if PCIe link information is not available
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetMaxPcieLinkWidth(nvmlDevice_t device, unsigned int *maxLinkWidth);

/**
 * Retrieves the current PCIe link generation
 * 
 * For Fermi &tm; or newer fully supported devices.
 * 
 * @param device                               The identifier of the target device
 * @param currLinkGen                          Reference in which to return the current PCIe link generation
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a currLinkGen has been populated
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a currLinkGen is null
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if PCIe link information is not available
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetCurrPcieLinkGeneration(nvmlDevice_t device, unsigned int *currLinkGen);

/**
 * Retrieves the current PCIe link width
 * 
 * For Fermi &tm; or newer fully supported devices.
 * 
 * @param device                               The identifier of the target device
 * @param currLinkWidth                        Reference in which to return the current PCIe link generation
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a currLinkWidth has been populated
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a currLinkWidth is null
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if PCIe link information is not available
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetCurrPcieLinkWidth(nvmlDevice_t device, unsigned int *currLinkWidth);

/**
 * Retrieve PCIe utilization information.
 * This function is querying a byte counter over a 20ms interval and thus is the 
 *   PCIe throughput over that interval.
 *
 * For Maxwell &tm; or newer fully supported devices.
 *
 * This method is not supported in virtual machines running virtual GPU (vGPU).
 *
 * @param device                               The identifier of the target device
 * @param counter                              The specific counter that should be queried \ref nvmlPcieUtilCounter_t
 * @param value                                Reference in which to return throughput in KB/s
 *
 * @return
 *         - \ref NVML_SUCCESS                 if \a value has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device or \a counter is invalid, or \a value is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetPcieThroughput(nvmlDevice_t device, nvmlPcieUtilCounter_t counter, unsigned int *value);

/**  
 * Retrieve the PCIe replay counter.
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param device                               The identifier of the target device
 * @param value                                Reference in which to return the counter's value
 *
 * @return
 *         - \ref NVML_SUCCESS                 if \a value and \a rollover have been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid, or \a value or \a rollover are NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetPcieReplayCounter(nvmlDevice_t device, unsigned int *value);

/**
 * Retrieves the current clock speeds for the device.
 *
 * For Fermi &tm; or newer fully supported devices.
 *
 * See \ref nvmlClockType_t for details on available clock information.
 *
 * @param device                               The identifier of the target device
 * @param type                                 Identify which clock domain to query
 * @param clock                                Reference in which to return the clock speed in MHz
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a clock has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a clock is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device cannot report the specified clock
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetClockInfo(nvmlDevice_t device, nvmlClockType_t type, unsigned int *clock);

/**
 * Retrieves the maximum clock speeds for the device.
 *
 * For Fermi &tm; or newer fully supported devices.
 *
 * See \ref nvmlClockType_t for details on available clock information.
 *
 * \note On GPUs from Fermi family current P0 clocks (reported by \ref nvmlDeviceGetClockInfo) can differ from max clocks
 *       by few MHz.
 *
 * @param device                               The identifier of the target device
 * @param type                                 Identify which clock domain to query
 * @param clock                                Reference in which to return the clock speed in MHz
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a clock has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a clock is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device cannot report the specified clock
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetMaxClockInfo(nvmlDevice_t device, nvmlClockType_t type, unsigned int *clock);

/**
 * Retrieves the current setting of a clock that applications will use unless an overspec situation occurs.
 * Can be changed using \ref nvmlDeviceSetApplicationsClocks.
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param device                               The identifier of the target device
 * @param clockType                            Identify which clock domain to query
 * @param clockMHz                             Reference in which to return the clock in MHz
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a clockMHz has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a clockMHz is NULL or \a clockType is invalid
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetApplicationsClock(nvmlDevice_t device, nvmlClockType_t clockType, unsigned int *clockMHz);

/**
 * Retrieves the default applications clock that GPU boots with or 
 * defaults to after \ref nvmlDeviceResetApplicationsClocks call.
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param device                               The identifier of the target device
 * @param clockType                            Identify which clock domain to query
 * @param clockMHz                             Reference in which to return the default clock in MHz
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a clockMHz has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a clockMHz is NULL or \a clockType is invalid
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 * \see nvmlDeviceGetApplicationsClock
 */
nvmlReturn_t DECLDIR nvmlDeviceGetDefaultApplicationsClock(nvmlDevice_t device, nvmlClockType_t clockType, unsigned int *clockMHz);

/**
 * Resets the application clock to the default value
 *
 * This is the applications clock that will be used after system reboot or driver reload.
 * Default value is constant, but the current value an be changed using \ref nvmlDeviceSetApplicationsClocks.
 *
 * On Pascal and newer hardware, if clocks were previously locked with \ref nvmlDeviceSetApplicationsClocks,
 * this call will unlock clocks. This returns clocks their default behavior ofautomatically boosting above
 * base clocks as thermal limits allow.
 *
 * @see nvmlDeviceGetApplicationsClock
 * @see nvmlDeviceSetApplicationsClocks
 *
 * For Fermi &tm; or newer non-GeForce fully supported devices and Maxwell or newer GeForce devices.
 *
 * @param device                               The identifier of the target device
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if new settings were successfully set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceResetApplicationsClocks(nvmlDevice_t device);

/**
 * Retrieves the clock speed for the clock specified by the clock type and clock ID.
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param device                               The identifier of the target device
 * @param clockType                            Identify which clock domain to query
 * @param clockId                              Identify which clock in the domain to query
 * @param clockMHz                             Reference in which to return the clock in MHz
 *
 * @return
 *         - \ref NVML_SUCCESS                 if \a clockMHz has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a clockMHz is NULL or \a clockType is invalid
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetClock(nvmlDevice_t device, nvmlClockType_t clockType, nvmlClockId_t clockId, unsigned int *clockMHz);

/**
 * Retrieves the customer defined maximum boost clock speed specified by the given clock type.
 *
 * For Pascal &tm; or newer fully supported devices.
 *
 * @param device                               The identifier of the target device
 * @param clockType                            Identify which clock domain to query
 * @param clockMHz                             Reference in which to return the clock in MHz
 *
 * @return
 *         - \ref NVML_SUCCESS                 if \a clockMHz has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a clockMHz is NULL or \a clockType is invalid
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device or the \a clockType on this device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetMaxCustomerBoostClock(nvmlDevice_t device, nvmlClockType_t clockType, unsigned int *clockMHz);

/**
 * Retrieves the list of possible memory clocks that can be used as an argument for \ref nvmlDeviceSetApplicationsClocks.
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param device                               The identifier of the target device
 * @param count                                Reference in which to provide the \a clocksMHz array size, and
 *                                             to return the number of elements
 * @param clocksMHz                            Reference in which to return the clock in MHz
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a count and \a clocksMHz have been populated 
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a count is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_INSUFFICIENT_SIZE if \a count is too small (\a count is set to the number of
 *                                                required elements)
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 * @see nvmlDeviceSetApplicationsClocks
 * @see nvmlDeviceGetSupportedGraphicsClocks
 */
nvmlReturn_t DECLDIR nvmlDeviceGetSupportedMemoryClocks(nvmlDevice_t device, unsigned int *count, unsigned int *clocksMHz);

/**
 * Retrieves the list of possible graphics clocks that can be used as an argument for \ref nvmlDeviceSetApplicationsClocks.
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param device                               The identifier of the target device
 * @param memoryClockMHz                       Memory clock for which to return possible graphics clocks
 * @param count                                Reference in which to provide the \a clocksMHz array size, and
 *                                             to return the number of elements
 * @param clocksMHz                            Reference in which to return the clocks in MHz
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a count and \a clocksMHz have been populated 
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_NOT_FOUND         if the specified \a memoryClockMHz is not a supported frequency
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a clock is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_INSUFFICIENT_SIZE if \a count is too small 
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 * @see nvmlDeviceSetApplicationsClocks
 * @see nvmlDeviceGetSupportedMemoryClocks
 */
nvmlReturn_t DECLDIR nvmlDeviceGetSupportedGraphicsClocks(nvmlDevice_t device, unsigned int memoryClockMHz, unsigned int *count, unsigned int *clocksMHz);

/**
 * Retrieve the current state of Auto Boosted clocks on a device and store it in \a isEnabled
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * Auto Boosted clocks are enabled by default on some hardware, allowing the GPU to run at higher clock rates
 * to maximize performance as thermal limits allow.
 *
 * On Pascal and newer hardware, Auto Aoosted clocks are controlled through application clocks.
 * Use \ref nvmlDeviceSetApplicationsClocks and \ref nvmlDeviceResetApplicationsClocks to control Auto Boost
 * behavior.
 *
 * @param device                               The identifier of the target device
 * @param isEnabled                            Where to store the current state of Auto Boosted clocks of the target device
 * @param defaultIsEnabled                     Where to store the default Auto Boosted clocks behavior of the target device that the device will
 *                                                 revert to when no applications are using the GPU
 *
 * @return
 *         - \ref NVML_SUCCESS                 If \a isEnabled has been been set with the Auto Boosted clocks state of \a device
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a isEnabled is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support Auto Boosted clocks
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 */
nvmlReturn_t DECLDIR nvmlDeviceGetAutoBoostedClocksEnabled(nvmlDevice_t device, nvmlEnableState_t *isEnabled, nvmlEnableState_t *defaultIsEnabled);

/**
 * Try to set the current state of Auto Boosted clocks on a device.
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * Auto Boosted clocks are enabled by default on some hardware, allowing the GPU to run at higher clock rates
 * to maximize performance as thermal limits allow. Auto Boosted clocks should be disabled if fixed clock
 * rates are desired.
 *
 * Non-root users may use this API by default but can be restricted by root from using this API by calling
 * \ref nvmlDeviceSetAPIRestriction with apiType=NVML_RESTRICTED_API_SET_AUTO_BOOSTED_CLOCKS.
 * Note: Persistence Mode is required to modify current Auto Boost settings, therefore, it must be enabled.
 *
 * On Pascal and newer hardware, Auto Boosted clocks are controlled through application clocks.
 * Use \ref nvmlDeviceSetApplicationsClocks and \ref nvmlDeviceResetApplicationsClocks to control Auto Boost
 * behavior.
 *
 * @param device                               The identifier of the target device
 * @param enabled                              What state to try to set Auto Boosted clocks of the target device to
 *
 * @return
 *         - \ref NVML_SUCCESS                 If the Auto Boosted clocks were successfully set to the state specified by \a enabled
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support Auto Boosted clocks
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 */
nvmlReturn_t DECLDIR nvmlDeviceSetAutoBoostedClocksEnabled(nvmlDevice_t device, nvmlEnableState_t enabled);

/**
 * Try to set the default state of Auto Boosted clocks on a device. This is the default state that Auto Boosted clocks will
 * return to when no compute running processes (e.g. CUDA application which have an active context) are running
 *
 * For Kepler &tm; or newer non-GeForce fully supported devices and Maxwell or newer GeForce devices.
 * Requires root/admin permissions.
 *
 * Auto Boosted clocks are enabled by default on some hardware, allowing the GPU to run at higher clock rates
 * to maximize performance as thermal limits allow. Auto Boosted clocks should be disabled if fixed clock
 * rates are desired.
 *
 * On Pascal and newer hardware, Auto Boosted clocks are controlled through application clocks.
 * Use \ref nvmlDeviceSetApplicationsClocks and \ref nvmlDeviceResetApplicationsClocks to control Auto Boost
 * behavior.
 *
 * @param device                               The identifier of the target device
 * @param enabled                              What state to try to set default Auto Boosted clocks of the target device to
 * @param flags                                Flags that change the default behavior. Currently Unused.
 *
 * @return
 *         - \ref NVML_SUCCESS                 If the Auto Boosted clock's default state was successfully set to the state specified by \a enabled
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_NO_PERMISSION     If the calling user does not have permission to change Auto Boosted clock's default state.
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support Auto Boosted clocks
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 */
nvmlReturn_t DECLDIR nvmlDeviceSetDefaultAutoBoostedClocksEnabled(nvmlDevice_t device, nvmlEnableState_t enabled, unsigned int flags);


/**
 * Retrieves the intended operating speed of the device's fan.
 *
 * Note: The reported speed is the intended fan speed.  If the fan is physically blocked and unable to spin, the
 * output will not match the actual fan speed.
 * 
 * For all discrete products with dedicated fans.
 *
 * The fan speed is expressed as a percent of the maximum, i.e. full speed is 100%.
 *
 * @param device                               The identifier of the target device
 * @param speed                                Reference in which to return the fan speed percentage
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a speed has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a speed is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not have a fan
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetFanSpeed(nvmlDevice_t device, unsigned int *speed);

/**
 * Retrieves the current temperature readings for the device, in degrees C. 
 * 
 * For all products.
 *
 * See \ref nvmlTemperatureSensors_t for details on available temperature sensors.
 *
 * @param device                               The identifier of the target device
 * @param sensorType                           Flag that indicates which sensor reading to retrieve
 * @param temp                                 Reference in which to return the temperature reading
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a temp has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid, \a sensorType is invalid or \a temp is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not have the specified sensor
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetTemperature(nvmlDevice_t device, nvmlTemperatureSensors_t sensorType, unsigned int *temp);

/**
 * Retrieves the temperature threshold for the GPU with the specified threshold type in degrees C.
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * See \ref nvmlTemperatureThresholds_t for details on available temperature thresholds.
 *
 * @param device                               The identifier of the target device
 * @param thresholdType                        The type of threshold value queried
 * @param temp                                 Reference in which to return the temperature reading
 * @return
 *         - \ref NVML_SUCCESS                 if \a temp has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid, \a thresholdType is invalid or \a temp is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not have a temperature sensor or is unsupported
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetTemperatureThreshold(nvmlDevice_t device, nvmlTemperatureThresholds_t thresholdType, unsigned int *temp);

/**
 * Retrieves the current performance state for the device. 
 *
 * For Fermi &tm; or newer fully supported devices.
 *
 * See \ref nvmlPstates_t for details on allowed performance states.
 *
 * @param device                               The identifier of the target device
 * @param pState                               Reference in which to return the performance state reading
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a pState has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a pState is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetPerformanceState(nvmlDevice_t device, nvmlPstates_t *pState);

/**
 * Retrieves current clocks throttling reasons.
 *
 * For all fully supported products.
 *
 * \note More than one bit can be enabled at the same time. Multiple reasons can be affecting clocks at once.
 *
 * @param device                                The identifier of the target device
 * @param clocksThrottleReasons                 Reference in which to return bitmask of active clocks throttle
 *                                                  reasons
 *
 * @return 
 *         - \ref NVML_SUCCESS                 if \a clocksThrottleReasons has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a clocksThrottleReasons is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 * @see nvmlClocksThrottleReasons
 * @see nvmlDeviceGetSupportedClocksThrottleReasons
 */
nvmlReturn_t DECLDIR nvmlDeviceGetCurrentClocksThrottleReasons(nvmlDevice_t device, unsigned long long *clocksThrottleReasons);

/**
 * Retrieves bitmask of supported clocks throttle reasons that can be returned by 
 * \ref nvmlDeviceGetCurrentClocksThrottleReasons
 *
 * For all fully supported products.
 *
 * This method is not supported in virtual machines running virtual GPU (vGPU).
 *
 * @param device                               The identifier of the target device
 * @param supportedClocksThrottleReasons       Reference in which to return bitmask of supported
 *                                              clocks throttle reasons
 *
 * @return 
 *         - \ref NVML_SUCCESS                 if \a supportedClocksThrottleReasons has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a supportedClocksThrottleReasons is NULL
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 * @see nvmlClocksThrottleReasons
 * @see nvmlDeviceGetCurrentClocksThrottleReasons
 */
nvmlReturn_t DECLDIR nvmlDeviceGetSupportedClocksThrottleReasons(nvmlDevice_t device, unsigned long long *supportedClocksThrottleReasons);

/**
 * Deprecated: Use \ref nvmlDeviceGetPerformanceState. This function exposes an incorrect generalization.
 *
 * Retrieve the current performance state for the device. 
 *
 * For Fermi &tm; or newer fully supported devices.
 *
 * See \ref nvmlPstates_t for details on allowed performance states.
 *
 * @param device                               The identifier of the target device
 * @param pState                               Reference in which to return the performance state reading
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a pState has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a pState is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetPowerState(nvmlDevice_t device, nvmlPstates_t *pState);

/**
 * This API has been deprecated.
 *
 * Retrieves the power management mode associated with this device.
 *
 * For products from the Fermi family.
 *     - Requires \a NVML_INFOROM_POWER version 3.0 or higher.
 *
 * For from the Kepler or newer families.
 *     - Does not require \a NVML_INFOROM_POWER object.
 *
 * This flag indicates whether any power management algorithm is currently active on the device. An 
 * enabled state does not necessarily mean the device is being actively throttled -- only that 
 * that the driver will do so if the appropriate conditions are met.
 *
 * See \ref nvmlEnableState_t for details on allowed modes.
 *
 * @param device                               The identifier of the target device
 * @param mode                                 Reference in which to return the current power management mode
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a mode has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a mode is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetPowerManagementMode(nvmlDevice_t device, nvmlEnableState_t *mode);

/**
 * Retrieves the power management limit associated with this device.
 *
 * For Fermi &tm; or newer fully supported devices.
 *
 * The power limit defines the upper boundary for the card's power draw. If
 * the card's total power draw reaches this limit the power management algorithm kicks in.
 *
 * This reading is only available if power management mode is supported. 
 * See \ref nvmlDeviceGetPowerManagementMode.
 *
 * @param device                               The identifier of the target device
 * @param limit                                Reference in which to return the power management limit in milliwatts
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a limit has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a limit is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetPowerManagementLimit(nvmlDevice_t device, unsigned int *limit);

/**
 * Retrieves information about possible values of power management limits on this device.
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param device                               The identifier of the target device
 * @param minLimit                             Reference in which to return the minimum power management limit in milliwatts
 * @param maxLimit                             Reference in which to return the maximum power management limit in milliwatts
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a minLimit and \a maxLimit have been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a minLimit or \a maxLimit is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 * @see nvmlDeviceSetPowerManagementLimit
 */
nvmlReturn_t DECLDIR nvmlDeviceGetPowerManagementLimitConstraints(nvmlDevice_t device, unsigned int *minLimit, unsigned int *maxLimit);

/**
 * Retrieves default power management limit on this device, in milliwatts.
 * Default power management limit is a power management limit that the device boots with.
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param device                               The identifier of the target device
 * @param defaultLimit                         Reference in which to return the default power management limit in milliwatts
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a defaultLimit has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a defaultLimit is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetPowerManagementDefaultLimit(nvmlDevice_t device, unsigned int *defaultLimit);

/**
 * Retrieves power usage for this GPU in milliwatts and its associated circuitry (e.g. memory)
 *
 * For Fermi &tm; or newer fully supported devices.
 *
 * On Fermi and Kepler GPUs the reading is accurate to within +/- 5% of current power draw.
 *
 * It is only available if power management mode is supported. See \ref nvmlDeviceGetPowerManagementMode.
 *
 * @param device                               The identifier of the target device
 * @param power                                Reference in which to return the power usage information
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a power has been populated
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a power is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support power readings
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetPowerUsage(nvmlDevice_t device, unsigned int *power);

/**
 * Get the effective power limit that the driver enforces after taking into account all limiters
 *
 * Note: This can be different from the \ref nvmlDeviceGetPowerManagementLimit if other limits are set elsewhere
 * This includes the out of band power limit interface
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param device                           The device to communicate with
 * @param limit                            Reference in which to return the power management limit in milliwatts
 *
 * @return 
 *         - \ref NVML_SUCCESS                 if \a limit has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a limit is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetEnforcedPowerLimit(nvmlDevice_t device, unsigned int *limit);

/**
 * Retrieves the current GOM and pending GOM (the one that GPU will switch to after reboot).
 *
 * For GK110 M-class and X-class Tesla &tm; products from the Kepler family.
 * Modes \ref NVML_GOM_LOW_DP and \ref NVML_GOM_ALL_ON are supported on fully supported GeForce products.
 * Not supported on Quadro &reg; and Tesla &tm; C-class products.
 *
 * @param device                               The identifier of the target device
 * @param current                              Reference in which to return the current GOM
 * @param pending                              Reference in which to return the pending GOM
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a mode has been populated
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a current or \a pending is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 * @see nvmlGpuOperationMode_t
 * @see nvmlDeviceSetGpuOperationMode
 */
nvmlReturn_t DECLDIR nvmlDeviceGetGpuOperationMode(nvmlDevice_t device, nvmlGpuOperationMode_t *current, nvmlGpuOperationMode_t *pending);

/**
 * Retrieves the amount of used, free and total memory available on the device, in bytes.
 * 
 * For all products.
 *
 * Enabling ECC reduces the amount of total available memory, due to the extra required parity bits.
 * Under WDDM most device memory is allocated and managed on startup by Windows.
 *
 * Under Linux and Windows TCC, the reported amount of used memory is equal to the sum of memory allocated 
 * by all active channels on the device.
 *
 * See \ref nvmlMemory_t for details on available memory info.
 *
 * @param device                               The identifier of the target device
 * @param memory                               Reference in which to return the memory information
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a memory has been populated
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a memory is NULL
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetMemoryInfo(nvmlDevice_t device, nvmlMemory_t *memory);

/**
 * Retrieves the current compute mode for the device.
 *
 * For all products.
 *
 * See \ref nvmlComputeMode_t for details on allowed compute modes.
 *
 * @param device                               The identifier of the target device
 * @param mode                                 Reference in which to return the current compute mode
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a mode has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a mode is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 * @see nvmlDeviceSetComputeMode()
 */
nvmlReturn_t DECLDIR nvmlDeviceGetComputeMode(nvmlDevice_t device, nvmlComputeMode_t *mode);

/**
 * Retrieves the CUDA compute capability of the device.
 *
 * For all products.
 *
 * Returns the major and minor compute capability version numbers of the
 * device.  The major and minor versions are equivalent to the
 * CU_DEVICE_ATTRIBUTE_COMPUTE_CAPABILITY_MINOR and
 * CU_DEVICE_ATTRIBUTE_COMPUTE_CAPABILITY_MAJOR attributes that would be
 * returned by CUDA's cuDeviceGetAttribute().
 *
 * @param device                               The identifier of the target device
 * @param major                                Reference in which to return the major CUDA compute capability
 * @param minor                                Reference in which to return the minor CUDA compute capability
 *
 * @return
 *         - \ref NVML_SUCCESS                 if \a major and \a minor have been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a major or \a minor are NULL
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetCudaComputeCapability(nvmlDevice_t device, int *major, int *minor);

/**
 * Retrieves the current and pending ECC modes for the device.
 *
 * For Fermi &tm; or newer fully supported devices.
 * Only applicable to devices with ECC.
 * Requires \a NVML_INFOROM_ECC version 1.0 or higher.
 *
 * Changing ECC modes requires a reboot. The "pending" ECC mode refers to the target mode following
 * the next reboot.
 *
 * See \ref nvmlEnableState_t for details on allowed modes.
 *
 * @param device                               The identifier of the target device
 * @param current                              Reference in which to return the current ECC mode
 * @param pending                              Reference in which to return the pending ECC mode
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a current and \a pending have been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or either \a current or \a pending is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 * @see nvmlDeviceSetEccMode()
 */
nvmlReturn_t DECLDIR nvmlDeviceGetEccMode(nvmlDevice_t device, nvmlEnableState_t *current, nvmlEnableState_t *pending);

/**
 * Retrieves the device boardId from 0-N.
 * Devices with the same boardId indicate GPUs connected to the same PLX.  Use in conjunction with 
 *  \ref nvmlDeviceGetMultiGpuBoard() to decide if they are on the same board as well.
 *  The boardId returned is a unique ID for the current configuration.  Uniqueness and ordering across 
 *  reboots and system configurations is not guaranteed (i.e. if a Tesla K40c returns 0x100 and
 *  the two GPUs on a Tesla K10 in the same system returns 0x200 it is not guaranteed they will 
 *  always return those values but they will always be different from each other).
 *  
 *
 * For Fermi &tm; or newer fully supported devices.
 *
 * @param device                               The identifier of the target device
 * @param boardId                              Reference in which to return the device's board ID
 *
 * @return
 *         - \ref NVML_SUCCESS                 if \a boardId has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a boardId is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetBoardId(nvmlDevice_t device, unsigned int *boardId);

/**
 * Retrieves whether the device is on a Multi-GPU Board
 * Devices that are on multi-GPU boards will set \a multiGpuBool to a non-zero value.
 *
 * For Fermi &tm; or newer fully supported devices.
 *
 * @param device                               The identifier of the target device
 * @param multiGpuBool                         Reference in which to return a zero or non-zero value
 *                                                 to indicate whether the device is on a multi GPU board
 *
 * @return
 *         - \ref NVML_SUCCESS                 if \a multiGpuBool has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a multiGpuBool is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetMultiGpuBoard(nvmlDevice_t device, unsigned int *multiGpuBool);

/**
 * Retrieves the total ECC error counts for the device.
 *
 * For Fermi &tm; or newer fully supported devices.
 * Only applicable to devices with ECC.
 * Requires \a NVML_INFOROM_ECC version 1.0 or higher.
 * Requires ECC Mode to be enabled.
 *
 * The total error count is the sum of errors across each of the separate memory systems, i.e. the total set of 
 * errors across the entire device.
 *
 * See \ref nvmlMemoryErrorType_t for a description of available error types.\n
 * See \ref nvmlEccCounterType_t for a description of available counter types.
 *
 * @param device                               The identifier of the target device
 * @param errorType                            Flag that specifies the type of the errors. 
 * @param counterType                          Flag that specifies the counter-type of the errors. 
 * @param eccCounts                            Reference in which to return the specified ECC errors
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a eccCounts has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device, \a errorType or \a counterType is invalid, or \a eccCounts is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 * @see nvmlDeviceClearEccErrorCounts()
 */
nvmlReturn_t DECLDIR nvmlDeviceGetTotalEccErrors(nvmlDevice_t device, nvmlMemoryErrorType_t errorType, nvmlEccCounterType_t counterType, unsigned long long *eccCounts);

/**
 * Retrieves the detailed ECC error counts for the device.
 *
 * @deprecated   This API supports only a fixed set of ECC error locations
 *               On different GPU architectures different locations are supported
 *               See \ref nvmlDeviceGetMemoryErrorCounter
 *
 * For Fermi &tm; or newer fully supported devices.
 * Only applicable to devices with ECC.
 * Requires \a NVML_INFOROM_ECC version 2.0 or higher to report aggregate location-based ECC counts.
 * Requires \a NVML_INFOROM_ECC version 1.0 or higher to report all other ECC counts.
 * Requires ECC Mode to be enabled.
 *
 * Detailed errors provide separate ECC counts for specific parts of the memory system.
 *
 * Reports zero for unsupported ECC error counters when a subset of ECC error counters are supported.
 *
 * See \ref nvmlMemoryErrorType_t for a description of available bit types.\n
 * See \ref nvmlEccCounterType_t for a description of available counter types.\n
 * See \ref nvmlEccErrorCounts_t for a description of provided detailed ECC counts.
 *
 * @param device                               The identifier of the target device
 * @param errorType                            Flag that specifies the type of the errors. 
 * @param counterType                          Flag that specifies the counter-type of the errors. 
 * @param eccCounts                            Reference in which to return the specified ECC errors
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a eccCounts has been populated
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device, \a errorType or \a counterType is invalid, or \a eccCounts is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 * @see nvmlDeviceClearEccErrorCounts()
 */
nvmlReturn_t DECLDIR nvmlDeviceGetDetailedEccErrors(nvmlDevice_t device, nvmlMemoryErrorType_t errorType, nvmlEccCounterType_t counterType, nvmlEccErrorCounts_t *eccCounts);

/**
 * Retrieves the requested memory error counter for the device.
 *
 * For Fermi &tm; or newer fully supported devices.
 * Requires \a NVML_INFOROM_ECC version 2.0 or higher to report aggregate location-based memory error counts.
 * Requires \a NVML_INFOROM_ECC version 1.0 or higher to report all other memory error counts.
 *
 * Only applicable to devices with ECC.
 *
 * Requires ECC Mode to be enabled.
 *
 * See \ref nvmlMemoryErrorType_t for a description of available memory error types.\n
 * See \ref nvmlEccCounterType_t for a description of available counter types.\n
 * See \ref nvmlMemoryLocation_t for a description of available counter locations.\n
 * 
 * @param device                               The identifier of the target device
 * @param errorType                            Flag that specifies the type of error.
 * @param counterType                          Flag that specifies the counter-type of the errors. 
 * @param locationType                         Specifies the location of the counter. 
 * @param count                                Reference in which to return the ECC counter
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a count has been populated
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device, \a bitTyp,e \a counterType or \a locationType is
 *                                             invalid, or \a count is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support ECC error reporting in the specified memory
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetMemoryErrorCounter(nvmlDevice_t device, nvmlMemoryErrorType_t errorType,
                                                   nvmlEccCounterType_t counterType,
                                                   nvmlMemoryLocation_t locationType, unsigned long long *count);

/**
 * Retrieves the current utilization rates for the device's major subsystems.
 *
 * For Fermi &tm; or newer fully supported devices.
 *
 * See \ref nvmlUtilization_t for details on available utilization rates.
 *
 * \note During driver initialization when ECC is enabled one can see high GPU and Memory Utilization readings.
 *       This is caused by ECC Memory Scrubbing mechanism that is performed during driver initialization.
 *
 * @param device                               The identifier of the target device
 * @param utilization                          Reference in which to return the utilization information
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a utilization has been populated
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a utilization is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetUtilizationRates(nvmlDevice_t device, nvmlUtilization_t *utilization);

/**
 * Retrieves the current utilization and sampling size in microseconds for the Encoder
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param device                               The identifier of the target device
 * @param utilization                          Reference to an unsigned int for encoder utilization info
 * @param samplingPeriodUs                     Reference to an unsigned int for the sampling period in US
 *
 * @return
 *         - \ref NVML_SUCCESS                 if \a utilization has been populated
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid, \a utilization is NULL, or \a samplingPeriodUs is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetEncoderUtilization(nvmlDevice_t device, unsigned int *utilization, unsigned int *samplingPeriodUs);

/**
 * Retrieves the current capacity of the device's encoder, in macroblocks per second.
 *
 * For Maxwell &tm; or newer fully supported devices.
 *
 * @param device                            The identifier of the target device
 * @param encoderQueryType                  Type of encoder to query
 * @param encoderCapacity                   Reference to an unsigned long long for the encoder capacity
 * 
 * @return
 *         - \ref NVML_SUCCESS                  if \a encoderCapacity is fetched
 *         - \ref NVML_ERROR_UNINITIALIZED      if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT   if \a encoderCapacity is NULL, or \a device or \a encoderQueryType
 *                                               are invalid
 *         - \ref NVML_ERROR_NOT_SUPPORTED      if device does not support the encoder specified in \encodeQueryType
 *         - \ref NVML_ERROR_GPU_IS_LOST        if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN            on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetEncoderCapacity (nvmlDevice_t device, nvmlEncoderQueryType_t encoderQueryType, unsigned long long *encoderCapacity);

/**
 * Retrieves the current utilization and sampling size in microseconds for the Decoder
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param device                               The identifier of the target device
 * @param utilization                          Reference to an unsigned int for decoder utilization info
 * @param samplingPeriodUs                     Reference to an unsigned int for the sampling period in US
 *
 * @return
 *         - \ref NVML_SUCCESS                 if \a utilization has been populated
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid, \a utilization is NULL, or \a samplingPeriodUs is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetDecoderUtilization(nvmlDevice_t device, unsigned int *utilization, unsigned int *samplingPeriodUs);

/**
 * Retrieves the current and pending driver model for the device.
 *
 * For Fermi &tm; or newer fully supported devices.
 * For windows only.
 *
 * On Windows platforms the device driver can run in either WDDM or WDM (TCC) mode. If a display is attached
 * to the device it must run in WDDM mode. TCC mode is preferred if a display is not attached.
 *
 * See \ref nvmlDriverModel_t for details on available driver models.
 *
 * @param device                               The identifier of the target device
 * @param current                              Reference in which to return the current driver model
 * @param pending                              Reference in which to return the pending driver model
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if either \a current and/or \a pending have been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or both \a current and \a pending are NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the platform is not windows
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 * 
 * @see nvmlDeviceSetDriverModel()
 */
nvmlReturn_t DECLDIR nvmlDeviceGetDriverModel(nvmlDevice_t device, nvmlDriverModel_t *current, nvmlDriverModel_t *pending);

/**
 * Get VBIOS version of the device.
 *
 * For all products.
 *
 * The VBIOS version may change from time to time. It will not exceed 32 characters in length 
 * (including the NULL terminator).  See \ref nvmlConstants::NVML_DEVICE_VBIOS_VERSION_BUFFER_SIZE.
 *
 * @param device                               The identifier of the target device
 * @param version                              Reference to which to return the VBIOS version
 * @param length                               The maximum allowed length of the string returned in \a version
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a version has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid, or \a version is NULL
 *         - \ref NVML_ERROR_INSUFFICIENT_SIZE if \a length is too small 
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetVbiosVersion(nvmlDevice_t device, char *version, unsigned int length);

/**
 * Get Bridge Chip Information for all the bridge chips on the board.
 * 
 * For all fully supported products.
 * Only applicable to multi-GPU products.
 * 
 * @param device                                The identifier of the target device
 * @param bridgeHierarchy                       Reference to the returned bridge chip Hierarchy
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if bridge chip exists
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid, or \a bridgeInfo is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if bridge chip not supported on the device
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 * 
 */
nvmlReturn_t DECLDIR nvmlDeviceGetBridgeChipInfo(nvmlDevice_t device, nvmlBridgeChipHierarchy_t *bridgeHierarchy);

/**
 * Get information about processes with a compute context on a device
 *
 * For Fermi &tm; or newer fully supported devices.
 *
 * This function returns information only about compute running processes (e.g. CUDA application which have
 * active context). Any graphics applications (e.g. using OpenGL, DirectX) won't be listed by this function.
 *
 * To query the current number of running compute processes, call this function with *infoCount = 0. The
 * return code will be NVML_ERROR_INSUFFICIENT_SIZE, or NVML_SUCCESS if none are running. For this call
 * \a infos is allowed to be NULL.
 *
 * The usedGpuMemory field returned is all of the memory used by the application.
 *
 * Keep in mind that information returned by this call is dynamic and the number of elements might change in
 * time. Allocate more space for \a infos table in case new compute processes are spawned.
 *
 * @param device                               The identifier of the target device
 * @param infoCount                            Reference in which to provide the \a infos array size, and
 *                                             to return the number of returned elements
 * @param infos                                Reference in which to return the process information
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a infoCount and \a infos have been populated
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INSUFFICIENT_SIZE if \a infoCount indicates that the \a infos array is too small
 *                                             \a infoCount will contain minimal amount of space necessary for
 *                                             the call to complete
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid, either of \a infoCount or \a infos is NULL
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 * @see \ref nvmlSystemGetProcessName
 */
nvmlReturn_t DECLDIR nvmlDeviceGetComputeRunningProcesses(nvmlDevice_t device, unsigned int *infoCount, nvmlProcessInfo_t *infos);

/**
 * Get information about processes with a graphics context on a device
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * This function returns information only about graphics based processes 
 * (eg. applications using OpenGL, DirectX)
 *
 * To query the current number of running graphics processes, call this function with *infoCount = 0. The
 * return code will be NVML_ERROR_INSUFFICIENT_SIZE, or NVML_SUCCESS if none are running. For this call
 * \a infos is allowed to be NULL.
 *
 * The usedGpuMemory field returned is all of the memory used by the application.
 *
 * Keep in mind that information returned by this call is dynamic and the number of elements might change in
 * time. Allocate more space for \a infos table in case new graphics processes are spawned.
 *
 * @param device                               The identifier of the target device
 * @param infoCount                            Reference in which to provide the \a infos array size, and
 *                                             to return the number of returned elements
 * @param infos                                Reference in which to return the process information
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a infoCount and \a infos have been populated
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INSUFFICIENT_SIZE if \a infoCount indicates that the \a infos array is too small
 *                                             \a infoCount will contain minimal amount of space necessary for
 *                                             the call to complete
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid, either of \a infoCount or \a infos is NULL
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 * @see \ref nvmlSystemGetProcessName
 */
nvmlReturn_t DECLDIR nvmlDeviceGetGraphicsRunningProcesses(nvmlDevice_t device, unsigned int *infoCount, nvmlProcessInfo_t *infos);

/**
 * Check if the GPU devices are on the same physical board.
 *
 * For all fully supported products.
 *
 * @param device1                               The first GPU device
 * @param device2                               The second GPU device
 * @param onSameBoard                           Reference in which to return the status.
 *                                              Non-zero indicates that the GPUs are on the same board.
 *
 * @return
 *         - \ref NVML_SUCCESS                 if \a onSameBoard has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a dev1 or \a dev2 are invalid or \a onSameBoard is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if this check is not supported by the device
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the either GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceOnSameBoard(nvmlDevice_t device1, nvmlDevice_t device2, int *onSameBoard);

/**
 * Retrieves the root/admin permissions on the target API. See \a nvmlRestrictedAPI_t for the list of supported APIs.
 * If an API is restricted only root users can call that API. See \a nvmlDeviceSetAPIRestriction to change current permissions.
 *
 * For all fully supported products.
 *
 * @param device                               The identifier of the target device
 * @param apiType                              Target API type for this operation
 * @param isRestricted                         Reference in which to return the current restriction 
 *                                             NVML_FEATURE_ENABLED indicates that the API is root-only
 *                                             NVML_FEATURE_DISABLED indicates that the API is accessible to all users
 *
 * @return
 *         - \ref NVML_SUCCESS                 if \a isRestricted has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid, \a apiType incorrect or \a isRestricted is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if this query is not supported by the device or the device does not support
 *                                                 the feature that is being queried (E.G. Enabling/disabling Auto Boosted clocks is
 *                                                 not supported by the device)
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 * @see nvmlRestrictedAPI_t
 */
nvmlReturn_t DECLDIR nvmlDeviceGetAPIRestriction(nvmlDevice_t device, nvmlRestrictedAPI_t apiType, nvmlEnableState_t *isRestricted);

/**
 * Gets recent samples for the GPU.
 * 
 * For Kepler &tm; or newer fully supported devices.
 * 
 * Based on type, this method can be used to fetch the power, utilization or clock samples maintained in the buffer by 
 * the driver.
 * 
 * Power, Utilization and Clock samples are returned as type "unsigned int" for the union nvmlValue_t.
 * 
 * To get the size of samples that user needs to allocate, the method is invoked with samples set to NULL. 
 * The returned samplesCount will provide the number of samples that can be queried. The user needs to 
 * allocate the buffer with size as samplesCount * sizeof(nvmlSample_t).
 * 
 * lastSeenTimeStamp represents CPU timestamp in microseconds. Set it to 0 to fetch all the samples maintained by the 
 * underlying buffer. Set lastSeenTimeStamp to one of the timeStamps retrieved from the date of the previous query 
 * to get more recent samples.
 * 
 * This method fetches the number of entries which can be accommodated in the provided samples array, and the 
 * reference samplesCount is updated to indicate how many samples were actually retrieved. The advantage of using this 
 * method for samples in contrast to polling via existing methods is to get get higher frequency data at lower polling cost.
 * 
 * @param device                        The identifier for the target device
 * @param type                          Type of sampling event
 * @param lastSeenTimeStamp             Return only samples with timestamp greater than lastSeenTimeStamp. 
 * @param sampleValType                 Output parameter to represent the type of sample value as described in nvmlSampleVal_t
 * @param sampleCount                   Reference to provide the number of elements which can be queried in samples array
 * @param samples                       Reference in which samples are returned
 
 * @return 
 *         - \ref NVML_SUCCESS                 if samples are successfully retrieved
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid, \a samplesCount is NULL or 
 *                                             reference to \a sampleCount is 0 for non null \a samples
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if this query is not supported by the device
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_NOT_FOUND         if sample entries are not found
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetSamples(nvmlDevice_t device, nvmlSamplingType_t type, unsigned long long lastSeenTimeStamp,
        nvmlValueType_t *sampleValType, unsigned int *sampleCount, nvmlSample_t *samples);

/**
 * Gets Total, Available and Used size of BAR1 memory.
 * 
 * BAR1 is used to map the FB (device memory) so that it can be directly accessed by the CPU or by 3rd party 
 * devices (peer-to-peer on the PCIE bus). 
 * 
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param device                               The identifier of the target device
 * @param bar1Memory                           Reference in which BAR1 memory
 *                                             information is returned.
 *
 * @return
 *         - \ref NVML_SUCCESS                 if BAR1 memory is successfully retrieved
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid, \a bar1Memory is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if this query is not supported by the device
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 */
nvmlReturn_t DECLDIR nvmlDeviceGetBAR1MemoryInfo(nvmlDevice_t device, nvmlBAR1Memory_t *bar1Memory);


/**
 * Gets the duration of time during which the device was throttled (lower than requested clocks) due to power 
 * or thermal constraints.
 *
 * The method is important to users who are tying to understand if their GPUs throttle at any point during their applications. The
 * difference in violation times at two different reference times gives the indication of GPU throttling event. 
 *
 * Violation for thermal capping is not supported at this time.
 * 
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param device                               The identifier of the target device
 * @param perfPolicyType                       Represents Performance policy which can trigger GPU throttling
 * @param violTime                             Reference to which violation time related information is returned 
 *                                         
 *
 * @return
 *         - \ref NVML_SUCCESS                 if violation time is successfully retrieved
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid, \a perfPolicyType is invalid, or \a violTime is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if this query is not supported by the device
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *
 */
nvmlReturn_t DECLDIR nvmlDeviceGetViolationStatus(nvmlDevice_t device, nvmlPerfPolicyType_t perfPolicyType, nvmlViolationTime_t *violTime);

/**
 * @}
 */

/** @addtogroup nvmlAccountingStats
 *  @{
 */

/**
 * Queries the state of per process accounting mode.
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * See \ref nvmlDeviceGetAccountingStats for more details.
 * See \ref nvmlDeviceSetAccountingMode
 *
 * @param device                               The identifier of the target device
 * @param mode                                 Reference in which to return the current accounting mode
 *
 * @return 
 *         - \ref NVML_SUCCESS                 if the mode has been successfully retrieved 
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a mode are NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device doesn't support this feature
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetAccountingMode(nvmlDevice_t device, nvmlEnableState_t *mode);

/**
 * Queries process's accounting stats.
 *
 * For Kepler &tm; or newer fully supported devices.
 * 
 * Accounting stats capture GPU utilization and other statistics across the lifetime of a process.
 * Accounting stats can be queried during life time of the process and after its termination.
 * The time field in \ref nvmlAccountingStats_t is reported as 0 during the lifetime of the process and 
 * updated to actual running time after its termination.
 * Accounting stats are kept in a circular buffer, newly created processes overwrite information about old
 * processes.
 *
 * See \ref nvmlAccountingStats_t for description of each returned metric.
 * List of processes that can be queried can be retrieved from \ref nvmlDeviceGetAccountingPids.
 *
 * @note Accounting Mode needs to be on. See \ref nvmlDeviceGetAccountingMode.
 * @note Only compute and graphics applications stats can be queried. Monitoring applications stats can't be
 *         queried since they don't contribute to GPU utilization.
 * @note In case of pid collision stats of only the latest process (that terminated last) will be reported
 *
 * @warning On Kepler devices per process statistics are accurate only if there's one process running on a GPU.
 * 
 * @param device                               The identifier of the target device
 * @param pid                                  Process Id of the target process to query stats for
 * @param stats                                Reference in which to return the process's accounting stats
 *
 * @return 
 *         - \ref NVML_SUCCESS                 if stats have been successfully retrieved
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a stats are NULL
 *         - \ref NVML_ERROR_NOT_FOUND         if process stats were not found
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device doesn't support this feature or accounting mode is disabled
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 * @see nvmlDeviceGetAccountingBufferSize
 */
nvmlReturn_t DECLDIR nvmlDeviceGetAccountingStats(nvmlDevice_t device, unsigned int pid, nvmlAccountingStats_t *stats);

/**
 * Queries list of processes that can be queried for accounting stats. The list of processes returned 
 * can be in running or terminated state.
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * To just query the number of processes ready to be queried, call this function with *count = 0 and
 * pids=NULL. The return code will be NVML_ERROR_INSUFFICIENT_SIZE, or NVML_SUCCESS if list is empty.
 * 
 * For more details see \ref nvmlDeviceGetAccountingStats.
 *
 * @note In case of PID collision some processes might not be accessible before the circular buffer is full.
 *
 * @param device                               The identifier of the target device
 * @param count                                Reference in which to provide the \a pids array size, and
 *                                               to return the number of elements ready to be queried
 * @param pids                                 Reference in which to return list of process ids
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if pids were successfully retrieved
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a count is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device doesn't support this feature or accounting mode is disabled
 *         - \ref NVML_ERROR_INSUFFICIENT_SIZE if \a count is too small (\a count is set to
 *                                                 expected value)
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 * @see nvmlDeviceGetAccountingBufferSize
 */
nvmlReturn_t DECLDIR nvmlDeviceGetAccountingPids(nvmlDevice_t device, unsigned int *count, unsigned int *pids);

/**
 * Returns the number of processes that the circular buffer with accounting pids can hold.
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * This is the maximum number of processes that accounting information will be stored for before information
 * about oldest processes will get overwritten by information about new processes.
 *
 * @param device                               The identifier of the target device
 * @param bufferSize                           Reference in which to provide the size (in number of elements)
 *                                               of the circular buffer for accounting stats.
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if buffer size was successfully retrieved
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a bufferSize is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device doesn't support this feature or accounting mode is disabled
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 * 
 * @see nvmlDeviceGetAccountingStats
 * @see nvmlDeviceGetAccountingPids
 */
nvmlReturn_t DECLDIR nvmlDeviceGetAccountingBufferSize(nvmlDevice_t device, unsigned int *bufferSize);

/** @} */

/** @addtogroup nvmlDeviceQueries
 *  @{
 */

/**
 * Returns the list of retired pages by source, including pages that are pending retirement
 * The address information provided from this API is the hardware address of the page that was retired.  Note
 * that this does not match the virtual address used in CUDA, but will match the address information in XID 63
 * 
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param device                            The identifier of the target device
 * @param cause                             Filter page addresses by cause of retirement
 * @param pageCount                         Reference in which to provide the \a addresses buffer size, and
 *                                          to return the number of retired pages that match \a cause
 *                                          Set to 0 to query the size without allocating an \a addresses buffer
 * @param addresses                         Buffer to write the page addresses into
 * 
 * @return
 *         - \ref NVML_SUCCESS                 if \a pageCount was populated and \a addresses was filled
 *         - \ref NVML_ERROR_INSUFFICIENT_SIZE if \a pageCount indicates the buffer is not large enough to store all the
 *                                             matching page addresses.  \a pageCount is set to the needed size.
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid, \a pageCount is NULL, \a cause is invalid, or 
 *                                             \a addresses is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device doesn't support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetRetiredPages(nvmlDevice_t device, nvmlPageRetirementCause_t cause,
    unsigned int *pageCount, unsigned long long *addresses);

/**
 * Check if any pages are pending retirement and need a reboot to fully retire.
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param device                            The identifier of the target device
 * @param isPending                         Reference in which to return the pending status
 * 
 * @return
 *         - \ref NVML_SUCCESS                 if \a isPending was populated
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a isPending is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device doesn't support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetRetiredPagesPendingStatus(nvmlDevice_t device, nvmlEnableState_t *isPending);

/** @} */

/***************************************************************************************************/
/** @defgroup nvmlUnitCommands Unit Commands
 *  This chapter describes NVML operations that change the state of the unit. For S-class products.
 *  Each of these requires root/admin access. Non-admin users will see an NVML_ERROR_NO_PERMISSION
 *  error code when invoking any of these methods.
 *  @{
 */
/***************************************************************************************************/

/**
 * Set the LED state for the unit. The LED can be either green (0) or amber (1).
 *
 * For S-class products.
 * Requires root/admin permissions.
 *
 * This operation takes effect immediately.
 * 
 *
 * <b>Current S-Class products don't provide unique LEDs for each unit. As such, both front 
 * and back LEDs will be toggled in unison regardless of which unit is specified with this command.</b>
 *
 * See \ref nvmlLedColor_t for available colors.
 *
 * @param unit                                 The identifier of the target unit
 * @param color                                The target LED color
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if the LED color has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a unit or \a color is invalid
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if this is not an S-class product
 *         - \ref NVML_ERROR_NO_PERMISSION     if the user doesn't have permission to perform this operation
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 * 
 * @see nvmlUnitGetLedState()
 */
nvmlReturn_t DECLDIR nvmlUnitSetLedState(nvmlUnit_t unit, nvmlLedColor_t color);

/** @} */

/***************************************************************************************************/
/** @defgroup nvmlDeviceCommands Device Commands
 *  This chapter describes NVML operations that change the state of the device.
 *  Each of these requires root/admin access. Non-admin users will see an NVML_ERROR_NO_PERMISSION
 *  error code when invoking any of these methods.
 *  @{
 */
/***************************************************************************************************/

/**
 * Set the persistence mode for the device.
 *
 * For all products.
 * For Linux only.
 * Requires root/admin permissions.
 *
 * The persistence mode determines whether the GPU driver software is torn down after the last client
 * exits.
 *
 * This operation takes effect immediately. It is not persistent across reboots. After each reboot the
 * persistence mode is reset to "Disabled".
 *
 * See \ref nvmlEnableState_t for available modes.
 *
 * @param device                               The identifier of the target device
 * @param mode                                 The target persistence mode
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if the persistence mode was set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a mode is invalid
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_NO_PERMISSION     if the user doesn't have permission to perform this operation
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 * @see nvmlDeviceGetPersistenceMode()
 */
nvmlReturn_t DECLDIR nvmlDeviceSetPersistenceMode(nvmlDevice_t device, nvmlEnableState_t mode);

/**
 * Set the compute mode for the device.
 *
 * For all products.
 * Requires root/admin permissions.
 *
 * The compute mode determines whether a GPU can be used for compute operations and whether it can
 * be shared across contexts.
 *
 * This operation takes effect immediately. Under Linux it is not persistent across reboots and
 * always resets to "Default". Under windows it is persistent.
 *
 * Under windows compute mode may only be set to DEFAULT when running in WDDM
 *
 * See \ref nvmlComputeMode_t for details on available compute modes.
 *
 * @param device                               The identifier of the target device
 * @param mode                                 The target compute mode
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if the compute mode was set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a mode is invalid
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_NO_PERMISSION     if the user doesn't have permission to perform this operation
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 * @see nvmlDeviceGetComputeMode()
 */
nvmlReturn_t DECLDIR nvmlDeviceSetComputeMode(nvmlDevice_t device, nvmlComputeMode_t mode);

/**
 * Set the ECC mode for the device.
 *
 * For Kepler &tm; or newer fully supported devices.
 * Only applicable to devices with ECC.
 * Requires \a NVML_INFOROM_ECC version 1.0 or higher.
 * Requires root/admin permissions.
 *
 * The ECC mode determines whether the GPU enables its ECC support.
 *
 * This operation takes effect after the next reboot.
 *
 * See \ref nvmlEnableState_t for details on available modes.
 *
 * @param device                               The identifier of the target device
 * @param ecc                                  The target ECC mode
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if the ECC mode was set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a ecc is invalid
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_NO_PERMISSION     if the user doesn't have permission to perform this operation
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 * @see nvmlDeviceGetEccMode()
 */
nvmlReturn_t DECLDIR nvmlDeviceSetEccMode(nvmlDevice_t device, nvmlEnableState_t ecc);  

/**
 * Clear the ECC error and other memory error counts for the device.
 *
 * For Kepler &tm; or newer fully supported devices.
 * Only applicable to devices with ECC.
 * Requires \a NVML_INFOROM_ECC version 2.0 or higher to clear aggregate location-based ECC counts.
 * Requires \a NVML_INFOROM_ECC version 1.0 or higher to clear all other ECC counts.
 * Requires root/admin permissions.
 * Requires ECC Mode to be enabled.
 *
 * Sets all of the specified ECC counters to 0, including both detailed and total counts.
 *
 * This operation takes effect immediately.
 *
 * See \ref nvmlMemoryErrorType_t for details on available counter types.
 *
 * @param device                               The identifier of the target device
 * @param counterType                          Flag that indicates which type of errors should be cleared.
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if the error counts were cleared
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a counterType is invalid
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_NO_PERMISSION     if the user doesn't have permission to perform this operation
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 * @see 
 *      - nvmlDeviceGetDetailedEccErrors()
 *      - nvmlDeviceGetTotalEccErrors()
 */
nvmlReturn_t DECLDIR nvmlDeviceClearEccErrorCounts(nvmlDevice_t device, nvmlEccCounterType_t counterType);

/**
 * Set the driver model for the device.
 *
 * For Fermi &tm; or newer fully supported devices.
 * For windows only.
 * Requires root/admin permissions.
 *
 * On Windows platforms the device driver can run in either WDDM or WDM (TCC) mode. If a display is attached
 * to the device it must run in WDDM mode.  
 *
 * It is possible to force the change to WDM (TCC) while the display is still attached with a force flag (nvmlFlagForce).
 * This should only be done if the host is subsequently powered down and the display is detached from the device
 * before the next reboot. 
 *
 * This operation takes effect after the next reboot.
 * 
 * Windows driver model may only be set to WDDM when running in DEFAULT compute mode.
 *
 * Change driver model to WDDM is not supported when GPU doesn't support graphics acceleration or 
 * will not support it after reboot. See \ref nvmlDeviceSetGpuOperationMode.
 *
 * See \ref nvmlDriverModel_t for details on available driver models.
 * See \ref nvmlFlagDefault and \ref nvmlFlagForce
 *
 * @param device                               The identifier of the target device
 * @param driverModel                          The target driver model
 * @param flags                                Flags that change the default behavior
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if the driver model has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a driverModel is invalid
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the platform is not windows or the device does not support this feature
 *         - \ref NVML_ERROR_NO_PERMISSION     if the user doesn't have permission to perform this operation
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 * 
 * @see nvmlDeviceGetDriverModel()
 */
nvmlReturn_t DECLDIR nvmlDeviceSetDriverModel(nvmlDevice_t device, nvmlDriverModel_t driverModel, unsigned int flags);

/**
 * Set clocks that applications will lock to.
 *
 * Sets the clocks that compute and graphics applications will be running at.
 * e.g. CUDA driver requests these clocks during context creation which means this property 
 * defines clocks at which CUDA applications will be running unless some overspec event
 * occurs (e.g. over power, over thermal or external HW brake).
 *
 * Can be used as a setting to request constant performance.
 *
 * On Pascal and newer hardware, this will automatically disable automatic boosting of clocks.
 *
 * On K80 and newer Kepler and Maxwell GPUs, users desiring fixed performance should also call
 * \ref nvmlDeviceSetAutoBoostedClocksEnabled to prevent clocks from automatically boosting
 * above the clock value being set.
 *
 * For Kepler &tm; or newer non-GeForce fully supported devices and Maxwell or newer GeForce devices.
 * Requires root/admin permissions. 
 *
 * See \ref nvmlDeviceGetSupportedMemoryClocks and \ref nvmlDeviceGetSupportedGraphicsClocks 
 * for details on how to list available clocks combinations.
 *
 * After system reboot or driver reload applications clocks go back to their default value.
 * See \ref nvmlDeviceResetApplicationsClocks.
 *
 * @param device                               The identifier of the target device
 * @param memClockMHz                          Requested memory clock in MHz
 * @param graphicsClockMHz                     Requested graphics clock in MHz
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if new settings were successfully set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a memClockMHz and \a graphicsClockMHz 
 *                                                 is not a valid clock combination
 *         - \ref NVML_ERROR_NO_PERMISSION     if the user doesn't have permission to perform this operation 
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device doesn't support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceSetApplicationsClocks(nvmlDevice_t device, unsigned int memClockMHz, unsigned int graphicsClockMHz);

/**
 * Set new power limit of this device.
 * 
 * For Kepler &tm; or newer fully supported devices.
 * Requires root/admin permissions.
 *
 * See \ref nvmlDeviceGetPowerManagementLimitConstraints to check the allowed ranges of values.
 *
 * \note Limit is not persistent across reboots or driver unloads.
 * Enable persistent mode to prevent driver from unloading when no application is using the device.
 *
 * @param device                               The identifier of the target device
 * @param limit                                Power management limit in milliwatts to set
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a limit has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a defaultLimit is out of range
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support this feature
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 * @see nvmlDeviceGetPowerManagementLimitConstraints
 * @see nvmlDeviceGetPowerManagementDefaultLimit
 */
nvmlReturn_t DECLDIR nvmlDeviceSetPowerManagementLimit(nvmlDevice_t device, unsigned int limit);

/**
 * Sets new GOM. See \a nvmlGpuOperationMode_t for details.
 *
 * For GK110 M-class and X-class Tesla &tm; products from the Kepler family.
 * Modes \ref NVML_GOM_LOW_DP and \ref NVML_GOM_ALL_ON are supported on fully supported GeForce products.
 * Not supported on Quadro &reg; and Tesla &tm; C-class products.
 * Requires root/admin permissions.
 * 
 * Changing GOMs requires a reboot. 
 * The reboot requirement might be removed in the future.
 *
 * Compute only GOMs don't support graphics acceleration. Under windows switching to these GOMs when
 * pending driver model is WDDM is not supported. See \ref nvmlDeviceSetDriverModel.
 * 
 * @param device                               The identifier of the target device
 * @param mode                                 Target GOM
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if \a mode has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a mode incorrect
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support GOM or specific mode
 *         - \ref NVML_ERROR_NO_PERMISSION     if the user doesn't have permission to perform this operation
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 * @see nvmlGpuOperationMode_t
 * @see nvmlDeviceGetGpuOperationMode
 */
nvmlReturn_t DECLDIR nvmlDeviceSetGpuOperationMode(nvmlDevice_t device, nvmlGpuOperationMode_t mode);

/**
 * Changes the root/admin restructions on certain APIs. See \a nvmlRestrictedAPI_t for the list of supported APIs.
 * This method can be used by a root/admin user to give non-root/admin access to certain otherwise-restricted APIs.
 * The new setting lasts for the lifetime of the NVIDIA driver; it is not persistent. See \a nvmlDeviceGetAPIRestriction
 * to query the current restriction settings.
 * 
 * For Kepler &tm; or newer fully supported devices.
 * Requires root/admin permissions.
 *
 * @param device                               The identifier of the target device
 * @param apiType                              Target API type for this operation
 * @param isRestricted                         The target restriction
 *
 * @return
 *         - \ref NVML_SUCCESS                 if \a isRestricted has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid or \a apiType incorrect
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device does not support changing API restrictions or the device does not support
 *                                                 the feature that api restrictions are being set for (E.G. Enabling/disabling auto 
 *                                                 boosted clocks is not supported by the device)
 *         - \ref NVML_ERROR_NO_PERMISSION     if the user doesn't have permission to perform this operation
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 *
 * @see nvmlRestrictedAPI_t
 */
nvmlReturn_t DECLDIR nvmlDeviceSetAPIRestriction(nvmlDevice_t device, nvmlRestrictedAPI_t apiType, nvmlEnableState_t isRestricted);

/**
 * @}
 */
 
/** @addtogroup nvmlAccountingStats
 *  @{
 */

/**
 * Enables or disables per process accounting.
 *
 * For Kepler &tm; or newer fully supported devices.
 * Requires root/admin permissions.
 *
 * @note This setting is not persistent and will default to disabled after driver unloads.
 *       Enable persistence mode to be sure the setting doesn't switch off to disabled.
 * 
 * @note Enabling accounting mode has no negative impact on the GPU performance.
 *
 * @note Disabling accounting clears all accounting pids information.
 *
 * See \ref nvmlDeviceGetAccountingMode
 * See \ref nvmlDeviceGetAccountingStats
 * See \ref nvmlDeviceClearAccountingPids
 *
 * @param device                               The identifier of the target device
 * @param mode                                 The target accounting mode
 *
 * @return 
 *         - \ref NVML_SUCCESS                 if the new mode has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device or \a mode are invalid
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device doesn't support this feature
 *         - \ref NVML_ERROR_NO_PERMISSION     if the user doesn't have permission to perform this operation
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceSetAccountingMode(nvmlDevice_t device, nvmlEnableState_t mode);

/**
 * Clears accounting information about all processes that have already terminated.
 *
 * For Kepler &tm; or newer fully supported devices.
 * Requires root/admin permissions.
 *
 * See \ref nvmlDeviceGetAccountingMode
 * See \ref nvmlDeviceGetAccountingStats
 * See \ref nvmlDeviceSetAccountingMode
 *
 * @param device                               The identifier of the target device
 *
 * @return 
 *         - \ref NVML_SUCCESS                 if accounting information has been cleared 
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device are invalid
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device doesn't support this feature
 *         - \ref NVML_ERROR_NO_PERMISSION     if the user doesn't have permission to perform this operation
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceClearAccountingPids(nvmlDevice_t device);

/** @} */

/***************************************************************************************************/
/** @defgroup NvLink NvLink Methods
 * This chapter describes methods that NVML can perform on NVLINK enabled devices.
 *  @{
 */
/***************************************************************************************************/

/**
 * Retrieves the state of the device's NvLink for the link specified
 *
 * For Pascal &tm; or newer fully supported devices.
 *
 * @param device                               The identifier of the target device
 * @param link                                 Specifies the NvLink link to be queried
 * @param isActive                             \a nvmlEnableState_t where NVML_FEATURE_ENABLED indicates that
 *                                             the link is active and NVML_FEATURE_DISABLED indicates it 
 *                                             is inactive
 *
 * @return 
 *         - \ref NVML_SUCCESS                 if \a isActive has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device or \a link is invalid or \a isActive is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device doesn't support this feature
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetNvLinkState(nvmlDevice_t device, unsigned int link, nvmlEnableState_t *isActive);

/**
 * Retrieves the version of the device's NvLink for the link specified
 *
 * For Pascal &tm; or newer fully supported devices.
 *
 * @param device                               The identifier of the target device
 * @param link                                 Specifies the NvLink link to be queried
 * @param version                              Requested NvLink version
 *
 * @return 
 *         - \ref NVML_SUCCESS                 if \a version has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device or \a link is invalid or \a version is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device doesn't support this feature
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetNvLinkVersion(nvmlDevice_t device, unsigned int link, unsigned int *version);

/**
 * Retrieves the requested capability from the device's NvLink for the link specified
 * Please refer to the \a nvmlNvLinkCapability_t structure for the specific caps that can be queried
 * The return value should be treated as a boolean.
 *
 * For Pascal &tm; or newer fully supported devices.
 *
 * @param device                               The identifier of the target device
 * @param link                                 Specifies the NvLink link to be queried
 * @param capability                           Specifies the \a nvmlNvLinkCapability_t to be queried
 * @param capResult                            A boolean for the queried capability indicating that feature is available
 *
 * @return 
 *         - \ref NVML_SUCCESS                 if \a capResult has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device, \a link, or \a capability is invalid or \a capResult is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device doesn't support this feature
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetNvLinkCapability(nvmlDevice_t device, unsigned int link,
                                                   nvmlNvLinkCapability_t capability, unsigned int *capResult); 

/**
 * Retrieves the PCI information for the remote node on a NvLink link 
 * Note: pciSubSystemId is not filled in this function and is indeterminate
 *
 * For Pascal &tm; or newer fully supported devices.
 *
 * @param device                               The identifier of the target device
 * @param link                                 Specifies the NvLink link to be queried
 * @param pci                                  \a nvmlPciInfo_t of the remote node for the specified link                            
 *
 * @return 
 *         - \ref NVML_SUCCESS                 if \a pci has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device or \a link is invalid or \a pci is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device doesn't support this feature
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetNvLinkRemotePciInfo(nvmlDevice_t device, unsigned int link, nvmlPciInfo_t *pci);

/**
 * Retrieves the specified error counter value
 * Please refer to \a nvmlNvLinkErrorCounter_t for error counters that are available
 *
 * For Pascal &tm; or newer fully supported devices.
 *
 * @param device                               The identifier of the target device
 * @param link                                 Specifies the NvLink link to be queried
 * @param counter                              Specifies the NvLink counter to be queried
 * @param counterValue                         Returned counter value
 *
 * @return 
 *         - \ref NVML_SUCCESS                 if \a counter has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device, \a link, or \a counter is invalid or \a counterValue is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device doesn't support this feature
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetNvLinkErrorCounter(nvmlDevice_t device, unsigned int link,
                                                     nvmlNvLinkErrorCounter_t counter, unsigned long long *counterValue);

/**
 * Resets all error counters to zero
 * Please refer to \a nvmlNvLinkErrorCounter_t for the list of error counters that are reset
 *
 * For Pascal &tm; or newer fully supported devices.
 *
 * @param device                               The identifier of the target device
 * @param link                                 Specifies the NvLink link to be queried
 *
 * @return 
 *         - \ref NVML_SUCCESS                 if the reset is successful
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device or \a link is invalid
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device doesn't support this feature
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceResetNvLinkErrorCounters(nvmlDevice_t device, unsigned int link);

/**
 * Set the NVLINK utilization counter control information for the specified counter, 0 or 1.
 * Please refer to \a nvmlNvLinkUtilizationControl_t for the structure definition.  Performs a reset
 * of the counters if the reset parameter is non-zero.
 *
 * For Pascal &tm; or newer fully supported devices.
 *
 * @param device                               The identifier of the target device
 * @param counter                              Specifies the counter that should be set (0 or 1).
 * @param link                                 Specifies the NvLink link to be queried
 * @param control                              A reference to the \a nvmlNvLinkUtilizationControl_t to set
 * @param reset                                Resets the counters on set if non-zero
 *
 * @return 
 *         - \ref NVML_SUCCESS                 if the control has been set successfully
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device, \a counter, \a link, or \a control is invalid 
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device doesn't support this feature
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceSetNvLinkUtilizationControl(nvmlDevice_t device, unsigned int link, unsigned int counter,
                                                           nvmlNvLinkUtilizationControl_t *control, unsigned int reset);

/**
 * Get the NVLINK utilization counter control information for the specified counter, 0 or 1.
 * Please refer to \a nvmlNvLinkUtilizationControl_t for the structure definition
 *
 * For Pascal &tm; or newer fully supported devices.
 *
 * @param device                               The identifier of the target device
 * @param counter                              Specifies the counter that should be set (0 or 1).
 * @param link                                 Specifies the NvLink link to be queried
 * @param control                              A reference to the \a nvmlNvLinkUtilizationControl_t to place information
 *
 * @return 
 *         - \ref NVML_SUCCESS                 if the control has been set successfully
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device, \a counter, \a link, or \a control is invalid 
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device doesn't support this feature
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetNvLinkUtilizationControl(nvmlDevice_t device, unsigned int link, unsigned int counter,
                                                           nvmlNvLinkUtilizationControl_t *control);


/**
 * Retrieve the NVLINK utilization counter based on the current control for a specified counter.
 * In general it is good practice to use \a nvmlDeviceSetNvLinkUtilizationControl
 *  before reading the utilization counters as they have no default state
 *
 * For Pascal &tm; or newer fully supported devices.
 *
 * @param device                               The identifier of the target device
 * @param link                                 Specifies the NvLink link to be queried
 * @param counter                              Specifies the counter that should be read (0 or 1).
 * @param rxcounter                            Receive counter return value
 * @param txcounter                            Transmit counter return value
 *
 * @return 
 *         - \ref NVML_SUCCESS                 if \a rxcounter and \a txcounter have been successfully set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device, \a counter, or \a link is invalid or \a rxcounter or \a txcounter are NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device doesn't support this feature
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetNvLinkUtilizationCounter(nvmlDevice_t device, unsigned int link, unsigned int counter, 
                                                           unsigned long long *rxcounter, unsigned long long *txcounter);

/**
 * Freeze the NVLINK utilization counters 
 * Both the receive and transmit counters are operated on by this function
 *
 * For Pascal &tm; or newer fully supported devices.
 *
 * @param device                               The identifier of the target device
 * @param link                                 Specifies the NvLink link to be queried
 * @param counter                              Specifies the counter that should be frozen (0 or 1).
 * @param freeze                               NVML_FEATURE_ENABLED = freeze the receive and transmit counters
 *                                             NVML_FEATURE_DISABLED = unfreeze the receive and transmit counters
 *
 * @return 
 *         - \ref NVML_SUCCESS                 if counters were successfully frozen or unfrozen
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device, \a link, \a counter, or \a freeze is invalid
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device doesn't support this feature
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceFreezeNvLinkUtilizationCounter (nvmlDevice_t device, unsigned int link, 
                                            unsigned int counter, nvmlEnableState_t freeze);

/**
 * Reset the NVLINK utilization counters 
 * Both the receive and transmit counters are operated on by this function
 *
 * For Pascal &tm; or newer fully supported devices.
 *
 * @param device                               The identifier of the target device
 * @param link                                 Specifies the NvLink link to be reset
 * @param counter                              Specifies the counter that should be reset (0 or 1)
 *
 * @return 
 *         - \ref NVML_SUCCESS                 if counters were successfully reset
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device, \a link, or \a counter is invalid
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the device doesn't support this feature
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceResetNvLinkUtilizationCounter (nvmlDevice_t device, unsigned int link, unsigned int counter);

/** @} */

/***************************************************************************************************/
/** @defgroup nvmlEvents Event Handling Methods
 * This chapter describes methods that NVML can perform against each device to register and wait for 
 * some event to occur.
 *  @{
 */
/***************************************************************************************************/

/**
 * Create an empty set of events.
 * Event set should be freed by \ref nvmlEventSetFree
 *
 * For Fermi &tm; or newer fully supported devices.
 * @param set                                  Reference in which to return the event handle
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if the event has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a set is NULL
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 * 
 * @see nvmlEventSetFree
 */
nvmlReturn_t DECLDIR nvmlEventSetCreate(nvmlEventSet_t *set);

/**
 * Starts recording of events on a specified devices and add the events to specified \ref nvmlEventSet_t
 *
 * For Fermi &tm; or newer fully supported devices.
 * Ecc events are available only on ECC enabled devices (see \ref nvmlDeviceGetTotalEccErrors)
 * Power capping events are available only on Power Management enabled devices (see \ref nvmlDeviceGetPowerManagementMode)
 *
 * For Linux only.
 *
 * \b IMPORTANT: Operations on \a set are not thread safe
 *
 * This call starts recording of events on specific device.
 * All events that occurred before this call are not recorded.
 * Checking if some event occurred can be done with \ref nvmlEventSetWait
 *
 * If function reports NVML_ERROR_UNKNOWN, event set is in undefined state and should be freed.
 * If function reports NVML_ERROR_NOT_SUPPORTED, event set can still be used. None of the requested eventTypes
 *     are registered in that case.
 *
 * @param device                               The identifier of the target device
 * @param eventTypes                           Bitmask of \ref nvmlEventType to record
 * @param set                                  Set to which add new event types
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if the event has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a eventTypes is invalid or \a set is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if the platform does not support this feature or some of requested event types
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 * 
 * @see nvmlEventType
 * @see nvmlDeviceGetSupportedEventTypes
 * @see nvmlEventSetWait
 * @see nvmlEventSetFree
 */
nvmlReturn_t DECLDIR nvmlDeviceRegisterEvents(nvmlDevice_t device, unsigned long long eventTypes, nvmlEventSet_t set);

/**
 * Returns information about events supported on device
 *
 * For Fermi &tm; or newer fully supported devices.
 *
 * Events are not supported on Windows. So this function returns an empty mask in \a eventTypes on Windows.
 *
 * @param device                               The identifier of the target device
 * @param eventTypes                           Reference in which to return bitmask of supported events
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if the eventTypes has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a eventType is NULL
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 * 
 * @see nvmlEventType
 * @see nvmlDeviceRegisterEvents
 */
nvmlReturn_t DECLDIR nvmlDeviceGetSupportedEventTypes(nvmlDevice_t device, unsigned long long *eventTypes);

/**
 * Waits on events and delivers events
 *
 * For Fermi &tm; or newer fully supported devices.
 *
 * If some events are ready to be delivered at the time of the call, function returns immediately.
 * If there are no events ready to be delivered, function sleeps till event arrives 
 * but not longer than specified timeout. This function in certain conditions can return before
 * specified timeout passes (e.g. when interrupt arrives)
 * 
 * In case of xid error, the function returns the most recent xid error type seen by the system. If there are multiple
 * xid errors generated before nvmlEventSetWait is invoked then the last seen xid error type is returned for all
 * xid error events.
 * 
 * @param set                                  Reference to set of events to wait on
 * @param data                                 Reference in which to return event data
 * @param timeoutms                            Maximum amount of wait time in milliseconds for registered event
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if the data has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a data is NULL
 *         - \ref NVML_ERROR_TIMEOUT           if no event arrived in specified timeout or interrupt arrived
 *         - \ref NVML_ERROR_GPU_IS_LOST       if a GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 * 
 * @see nvmlEventType
 * @see nvmlDeviceRegisterEvents
 */
nvmlReturn_t DECLDIR nvmlEventSetWait(nvmlEventSet_t set, nvmlEventData_t * data, unsigned int timeoutms);

/**
 * Releases events in the set
 *
 * For Fermi &tm; or newer fully supported devices.
 *
 * @param set                                  Reference to events to be released 
 * 
 * @return 
 *         - \ref NVML_SUCCESS                 if the event has been successfully released
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 * 
 * @see nvmlDeviceRegisterEvents
 */
nvmlReturn_t DECLDIR nvmlEventSetFree(nvmlEventSet_t set);

/** @} */

/***************************************************************************************************/
/** @defgroup nvmlGridQueries Grid Queries
 *  This chapter describes NVML operations that are associated with NVIDIA GRID products.
 *  @{
 */
/***************************************************************************************************/

/**
 * This method is used to get the virtualization mode corresponding to the GPU.
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param device                    Identifier of the target device
 * @param pVirtualMode              Reference to virtualization mode. One of NVML_GPU_VIRTUALIZATION_?
 * 
 * @return 
 *         - \ref NVML_SUCCESS                  if \a pVirtualMode is fetched
 *         - \ref NVML_ERROR_UNINITIALIZED      if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT   if \a device is invalid or \a pVirtualMode is NULL
 *         - \ref NVML_ERROR_GPU_IS_LOST        if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_UNKNOWN            on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetVirtualizationMode(nvmlDevice_t device, nvmlGpuVirtualizationMode_t *pVirtualMode);

/** @} */

/***************************************************************************************************/
/** @defgroup nvmlGridCommands Grid Commands
 *  This chapter describes NVML operations that are associated with NVIDIA GRID products.
 *  @{
 */
/***************************************************************************************************/

/**
 * This method is used to set the virtualization mode corresponding to the GPU.
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param device                    Identifier of the target device
 * @param virtualMode               virtualization mode. One of NVML_GPU_VIRTUALIZATION_?
 *
 * @return 
 *         - \ref NVML_SUCCESS                  if \a pVirtualMode is set
 *         - \ref NVML_ERROR_UNINITIALIZED      if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT   if \a device is invalid or \a pVirtualMode is NULL
 *         - \ref NVML_ERROR_GPU_IS_LOST        if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_NOT_SUPPORTED      if setting of virtualization mode is not supported.
 *         - \ref NVML_ERROR_NO_PERMISSION      if setting of virtualization mode is not allowed for this client.
 */
nvmlReturn_t DECLDIR nvmlDeviceSetVirtualizationMode(nvmlDevice_t device, nvmlGpuVirtualizationMode_t virtualMode);

/** @} */

/***************************************************************************************************/
/** @defgroup nvmlVgpu vGPU Management
 * @{
 *
 * Set of APIs supporting GRID vGPU
 */
/***************************************************************************************************/

/**
 * Retrieve the supported vGPU types on a physical GPU (device).
 *
 * An array of supported vGPU types for the physical GPU indicated by \a device is returned in the caller-supplied buffer
 * pointed at by \a vgpuTypeIds. The element count of nvmlVgpuTypeId_t array is passed in \a vgpuCount, and \a vgpuCount
 * is used to return the number of vGPU types written to the buffer.
 *
 * If the supplied buffer is not large enough to accomodate the vGPU type array, the function returns
 * NVML_ERROR_INSUFFICIENT_SIZE, with the element count of nvmlVgpuTypeId_t array required in \a vgpuCount.
 * To query the number of vGPU types supported for the GPU, call this function with *vgpuCount = 0.
 * The code will return NVML_ERROR_INSUFFICIENT_SIZE, or NVML_SUCCESS if no vGPU types are supported.
 *
 * @param device                   The identifier of the target device
 * @param vgpuCount                Pointer to caller-supplied array size, and returns number of vGPU types
 * @param vgpuTypeIds              Pointer to caller-supplied array in which to return list of vGPU types
 *
 * @return
 *         - \ref NVML_SUCCESS                   successful completion
 *         - \ref NVML_ERROR_INSUFFICIENT_SIZE   \a vgpuTypeIds buffer is too small, array element count is returned in \a vgpuCount
 *         - \ref NVML_ERROR_INVALID_ARGUMENT    if \a vgpuCount is NULL or \a device is invalid
 *         - \ref NVML_ERROR_NOT_SUPPORTED       if vGPU is not supported by the device
 *         - \ref NVML_ERROR_UNKNOWN             on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetSupportedVgpus(nvmlDevice_t device, unsigned int *vgpuCount, nvmlVgpuTypeId_t *vgpuTypeIds);

/**
 * Retrieve the currently creatable vGPU types on a physical GPU (device).
 *
 * An array of creatable vGPU types for the physical GPU indicated by \a device is returned in the caller-supplied buffer
 * pointed at by \a vgpuTypeIds. The element count of nvmlVgpuTypeId_t array is passed in \a vgpuCount, and \a vgpuCount
 * is used to return the number of vGPU types written to the buffer.
 *
 * The creatable vGPU types for a device may differ over time, as there may be restrictions on what type of vGPU types
 * can concurrently run on a device.  For example, if only one vGPU type is allowed at a time on a device, then the creatable
 * list will be restricted to whatever vGPU type is already running on the device.
 *
 * If the supplied buffer is not large enough to accomodate the vGPU type array, the function returns
 * NVML_ERROR_INSUFFICIENT_SIZE, with the element count of nvmlVgpuTypeId_t array required in \a vgpuCount.
 * To query the number of vGPU types createable for the GPU, call this function with *vgpuCount = 0.
 * The code will return NVML_ERROR_INSUFFICIENT_SIZE, or NVML_SUCCESS if no vGPU types are creatable.
 *
 * @param device                   The identifier of the target device
 * @param vgpuCount                Pointer to caller-supplied array size, and returns number of vGPU types
 * @param vgpuTypeIds              Pointer to caller-supplied array in which to return list of vGPU types
 *
 * @return
 *         - \ref NVML_SUCCESS                   successful completion
 *         - \ref NVML_ERROR_INSUFFICIENT_SIZE   \a vgpuTypeIds buffer is too small, array element count is returned in \a vgpuCount
 *         - \ref NVML_ERROR_INVALID_ARGUMENT    if \a vgpuCount is NULL
 *         - \ref NVML_ERROR_NOT_SUPPORTED       if vGPU is not supported by the device
 *         - \ref NVML_ERROR_UNKNOWN             on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetCreatableVgpus(nvmlDevice_t device, unsigned int *vgpuCount, nvmlVgpuTypeId_t *vgpuTypeIds);

/**
 * Retrieve the class of a vGPU type. It will not exceed 64 characters in length (including the NUL terminator).
 * See \ref nvmlConstants::NVML_DEVICE_NAME_BUFFER_SIZE.
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param vgpuTypeId               Handle to vGPU type
 * @param vgpuTypeClass            Pointer to string array to return class in
 * @param size                     Size of string
 *
 * @return
 *         - \ref NVML_SUCCESS                   successful completion
 *         - \ref NVML_ERROR_INVALID_ARGUMENT    if \a vgpuTypeId is invalid, or \a vgpuTypeClass is NULL
 *         - \ref NVML_ERROR_INSUFFICIENT_SIZE   if \a size is too small
 *         - \ref NVML_ERROR_UNKNOWN             on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlVgpuTypeGetClass(nvmlVgpuTypeId_t vgpuTypeId, char *vgpuTypeClass, unsigned int *size);

/**
 * Retrieve the vGPU type name.
 *
 * The name is an alphanumeric string that denotes a particular vGPU, e.g. GRID M60-2Q. It will not
 * exceed 64 characters in length (including the NUL terminator).  See \ref
 * nvmlConstants::NVML_DEVICE_NAME_BUFFER_SIZE.
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param vgpuTypeId               Handle to vGPU type
 * @param vgpuTypeName             Pointer to buffer to return name
 * @param size                     Size of buffer
 *
 * @return
 *         - \ref NVML_SUCCESS                 successful completion
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a vgpuTypeId is invalid, or \a name is NULL
 *         - \ref NVML_ERROR_INSUFFICIENT_SIZE if \a size is too small
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlVgpuTypeGetName(nvmlVgpuTypeId_t vgpuTypeId, char *vgpuTypeName, unsigned int *size);

/**
 * Retrieve the device ID of a vGPU type.
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param vgpuTypeId               Handle to vGPU type
 * @param deviceID                 Device ID and vendor ID of the device contained in single 32 bit value
 * @param subsystemID              Subsytem ID and subsytem vendor ID of the device contained in single 32 bit value
 *
 * @return
 *         - \ref NVML_SUCCESS                 successful completion
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a vgpuTypeId is invalid, or \a deviceId or \a subsystemID are NULL
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlVgpuTypeGetDeviceID(nvmlVgpuTypeId_t vgpuTypeId, unsigned long long *deviceID, unsigned long long *subsystemID);

/**
 * Retrieve the vGPU framebuffer size in bytes.
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param vgpuTypeId               Handle to vGPU type
 * @param fbSize                   Pointer to framebuffer size in bytes
 *
 * @return
 *         - \ref NVML_SUCCESS                 successful completion
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a vgpuTypeId is invalid, or \a fbSize is NULL
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlVgpuTypeGetFramebufferSize(nvmlVgpuTypeId_t vgpuTypeId, unsigned long long *fbSize);

/**
 * Retrieve count of vGPU's supported display heads.
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param vgpuTypeId               Handle to vGPU type
 * @param numDisplayHeads          Pointer to number of display heads
 *
 * @return
 *         - \ref NVML_SUCCESS                 successful completion
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a vgpuTypeId is invalid, or \a numDisplayHeads is NULL
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlVgpuTypeGetNumDisplayHeads(nvmlVgpuTypeId_t vgpuTypeId, unsigned int *numDisplayHeads);

/**
 * Retrieve vGPU display head's maximum supported resolution.
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param vgpuTypeId               Handle to vGPU type
 * @param displayIndex             Zero-based index of display head
 * @param xdim                     Pointer to maximum number of pixels in X dimension
 * @param ydim                     Pointer to maximum number of pixels in Y dimension
 *
 * @return
 *         - \ref NVML_SUCCESS                 successful completion
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a vgpuTypeId is invalid, or \a xdim or \a ydim are NULL, or \a displayIndex
 *                                             is out of range.
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlVgpuTypeGetResolution(nvmlVgpuTypeId_t vgpuTypeId, unsigned int displayIndex, unsigned int *xdim, unsigned int *ydim);

/**
 * Retrieve license requirements for a vGPU type
 *
 * The license type and version required to run the specified vGPU type is returned as an alphanumeric string, in the form
 * "<license name>,<version>", for example "GRID-Virtual-PC,2.0". If a vGPU is runnable with* more than one type of license,
 * the licenses are delimited by a semicolon, for example "GRID-Virtual-PC,2.0;GRID-Virtual-WS,2.0;GRID-Virtual-WS-Ext,2.0".
 *
 * The total length of the returned string will not exceed 128 characters, including the NUL terminator.
 * See \ref nvmlVgpuConstants::NVML_GRID_LICENSE_BUFFER_SIZE.
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param vgpuTypeId               Handle to vGPU type
 * @param vgpuTypeLicenseString    Pointer to buffer to return license info
 * @param size                     Size of \a vgpuTypeLicenseString buffer
 *
 * @return
 *         - \ref NVML_SUCCESS                 successful completion
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a vgpuTypeId is invalid, or \a vgpuTypeLicenseString is NULL
 *         - \ref NVML_ERROR_INSUFFICIENT_SIZE if \a size is too small
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlVgpuTypeGetLicense(nvmlVgpuTypeId_t vgpuTypeId, char *vgpuTypeLicenseString, unsigned int size);

/**
 * Retrieve the static frame rate limit value of the vGPU type
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param vgpuTypeId               Handle to vGPU type
 * @param frameRateLimit           Reference to return the frame rate limit value
 * @return
 *         - \ref NVML_SUCCESS                 successful completion
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid, or \a frameRateLimit is NULL
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlVgpuTypeGetFrameRateLimit(nvmlVgpuTypeId_t vgpuTypeId, unsigned int *frameRateLimit);

/**
 * Retrieve the maximum number of vGPU instances creatable on a device for given vGPU type
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param device                   The identifier of the target device
 * @param vgpuTypeId               Handle to vGPU type
 * @param vgpuInstanceCount        Pointer to get the max number of vGPU instances
 *                                 that can be created on a deicve for given vgpuTypeId
 * @return
 *         - \ref NVML_SUCCESS                 successful completion
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a vgpuTypeId is invalid or is not supported on target device,
 *                                             or \a vgpuInstanceCount is NULL
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlVgpuTypeGetMaxInstances(nvmlDevice_t device, nvmlVgpuTypeId_t vgpuTypeId, unsigned int *vgpuInstanceCount);

/**
 * Retrieve the active vGPU instances on a device.
 *
 * An array of active vGPU instances is returned in the caller-supplied buffer pointed at by \a vgpuInstances. The
 * array elememt count is passed in \a vgpuCount, and \a vgpuCount is used to return the number of vGPU instances
 * written to the buffer.
 *
 * If the supplied buffer is not large enough to accomodate the vGPU instance array, the function returns
 * NVML_ERROR_INSUFFICIENT_SIZE, with the element count of nvmlVgpuInstance_t array required in \a vgpuCount.
 * To query the number of active vGPU instances, call this function with *vgpuCount = 0.  The code will return
 * NVML_ERROR_INSUFFICIENT_SIZE, or NVML_SUCCESS if no vGPU Types are supported.
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param device                   The identifier of the target device
 * @param vgpuCount                Pointer which passes in the array size as well as get
 *                                 back the number of types
 * @param vgpuInstances            Pointer to array in which to return list of vGPU instances
 *
 * @return
 *         - \ref NVML_SUCCESS                  successful completion
 *         - \ref NVML_ERROR_UNINITIALIZED      if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT   if \a device is invalid, or \a vgpuCount is NULL
 *         - \ref NVML_ERROR_INSUFFICIENT_SIZE  if \a size is too small
 *         - \ref NVML_ERROR_NOT_SUPPORTED      if vGPU is not supported by the device
 *         - \ref NVML_ERROR_UNKNOWN            on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetActiveVgpus(nvmlDevice_t device, unsigned int *vgpuCount, nvmlVgpuInstance_t *vgpuInstances);

/**
 * Retrieve the VM ID associated with a vGPU instance.
 *
 * The VM ID is returned as a string, not exceeding 80 characters in length (including the NUL terminator).
 * See \ref nvmlConstants::NVML_DEVICE_UUID_BUFFER_SIZE.
 *
 * The format of the VM ID varies by platform, and is indicated by the type identifier returned in \a vmIdType.
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param vgpuInstance             Identifier of the target vGPU instance
 * @param vmId                     Pointer to caller-supplied buffer to hold VM ID
 * @param size                     Size of buffer in bytes
 * @param vmIdType                 Pointer to hold VM ID type
 *
 * @return
 *         - \ref NVML_SUCCESS                 successful completion
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a vgpuInstance is invalid, or \a vmId or \a vmIdType are NULL
 *         - \ref NVML_ERROR_INSUFFICIENT_SIZE if \a size is too small
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlVgpuInstanceGetVmID(nvmlVgpuInstance_t vgpuInstance, char *vmId, unsigned int size, nvmlVgpuVmIdType_t *vmIdType);

/**
 * Retrieve the UUID of a vGPU instance.
 *
 * The UUID is a globally unique identifier associated with the vGPU, and is returned as a 5-part hexadecimal string,
 * not exceeding 80 characters in length (including the NULL terminator).
 * See \ref nvmlConstants::NVML_DEVICE_UUID_BUFFER_SIZE.
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param vgpuInstance             Identifier of the target vGPU instance
 * @param uuid                     Pointer to caller-supplied buffer to hold vGPU UUID
 * @param size                     Size of buffer in bytes
 *
 * @return
 *         - \ref NVML_SUCCESS                 successful completion
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a vgpuInstance is invalid, or \a uuid is NULL
 *         - \ref NVML_ERROR_INSUFFICIENT_SIZE if \a size is too small
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlVgpuInstanceGetUUID(nvmlVgpuInstance_t vgpuInstance, char *uuid, unsigned int size);

/**
 * Retrieve the NVIDIA driver version installed in the VM associated with a vGPU.
 *
 * The version is returned as an alphanumeric string in the caller-supplied buffer \a version. The length of the version
 * string will not exceed 80 characters in length (including the NUL terminator).
 * See \ref nvmlConstants::NVML_SYSTEM_DRIVER_VERSION_BUFFER_SIZE.
 *
 * nvmlVgpuInstanceGetVmDriverVersion() may be called at any time for a vGPU instance. The guest VM driver version is
 * returned as "Unknown" if no NVIDIA driver is installed in the VM, or the VM has not yet booted to the point where the
 * NVIDIA driver is loaded and initialized.
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param vgpuInstance             Identifier of the target vGPU instance
 * @param version                  Caller-supplied buffer to return driver version string
 * @param length                   Size of \a version buffer
 *
 * @return
 *         - \ref NVML_SUCCESS                 if \a version has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a vgpuInstance is invalid
 *         - \ref NVML_ERROR_INSUFFICIENT_SIZE if \a length is too small
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlVgpuInstanceGetVmDriverVersion(nvmlVgpuInstance_t vgpuInstance, char* version, unsigned int length);

/**
 * Retrieve the framebuffer usage in bytes.
 *
 * Framebuffer usage is the amont of vGPU framebuffer memory that is currently in use by the VM.
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param vgpuInstance             The identifier of the target instance
 * @param fbUsage                  Pointer to framebuffer usage in bytes
 *
 * @return
 *         - \ref NVML_SUCCESS                 successful completion
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a vgpuInstance is invalid, or \a fbUsage is NULL
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlVgpuInstanceGetFbUsage(nvmlVgpuInstance_t vgpuInstance, unsigned long long *fbUsage);

/**
 * Retrieve the current licensing state of the vGPU instance.
 *
 * If the vGPU is currently licensed, \a licensed is set to 1, otherwise it is set to 0.
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param vgpuInstance             Identifier of the target vGPU instance
 * @param licensed                 Reference to return the licensing status
 *
 * @return
 *         - \ref NVML_SUCCESS                 if \a licensed has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a vgpuInstance is invalid, or \a licensed is NULL
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlVgpuInstanceGetLicenseStatus(nvmlVgpuInstance_t vgpuInstance, unsigned int *licensed);

/**
 * Retrieve the vGPU type of a vGPU instance.
 *
 * Returns the vGPU type ID of vgpu assigned to the vGPU instance.
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param vgpuInstance             Identifier of the target vGPU instance
 * @param vgpuTypeId               Reference to return the vgpuTypeId
 *
 * @return
 *         - \ref NVML_SUCCESS                 if \a vgpuTypeId has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a vgpuInstance is invalid, or \a vgpuTypeId is NULL
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlVgpuInstanceGetType(nvmlVgpuInstance_t vgpuInstance, nvmlVgpuTypeId_t *vgpuTypeId);

/**
 * Retrieve the frame rate limit set for the vGPU instance.
 *
 * Returns the value of the frame rate limit set for the vGPU instance
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * @param vgpuInstance             Identifier of the target vGPU instance
 * @param frameRateLimit           Reference to return the frame rate limit
 *
 * @return
 *         - \ref NVML_SUCCESS                 if \a frameRateLimit has been set
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a vgpuInstance is invalid, or \a frameRateLimit is NULL
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlVgpuInstanceGetFrameRateLimit(nvmlVgpuInstance_t vgpuInstance, unsigned int *frameRateLimit);


/**
 * Retrieves current utilization for vGPUs on a physical GPU (device).
 *
 * For Kepler &tm; or newer fully supported devices.
 *
 * Reads recent utilization of GPU SM (3D/Compute), framebuffer, video encoder, and video decoder for vGPU instances running
 * on a device. Utilization values are returned as an array of utilization sample structures in the caller-supplied buffer
 * pointed at by \a utilizationSamples. One utilization sample structure is returned per vGPU instance, and includes the
 * CPU timestamp at which the samples were recorded. Individual utilization values are returned as "unsigned int" values
 * in nvmlValue_t unions. The function sets the caller-supplied \a sampleValType to NVML_VALUE_TYPE_UNSIGNED_INT to
 * indicate the returned value type.
 *
 * To read utilization values, first determine the size of buffer required to hold the samples by invoking the function with
 * \a utilizationSamples set to NULL. The function will return NVML_ERROR_INSUFFICIENT_SIZE, with the current vGPU instance
 * count in \a vgpuInstanceSamplesCount, or NVML_SUCCESS if the current vGPU instance count is zero. The caller should allocate
 * a buffer of size vgpuInstanceSamplesCount * sizeof(nvmlVgpuInstanceUtilizationSample_t). Invoke the function again with
 * the allocated buffer passed in \a utilizationSamples, and \a vgpuInstanceSamplesCount set to the number of entries the
 * buffer is sized for.
 *
 * On successful return, the function updates \a vgpuInstanceSampleCount with the number of vGPU utilization sample
 * structures that were actually written. This may differ from a previously read value as vGPU instances are created or
 * destroyed.
 *
 * lastSeenTimeStamp represents the CPU timestamp in microseconds at which utilization samples were last read. Set it to 0
 * to read utilization based on all the samples maintained by the driver's internal sample buffer. Set lastSeenTimeStamp
 * to a timeStamp retrieved from a previous query to read utilization since the previous query.
 *
 * @param device                        The identifier for the target device
 * @param lastSeenTimeStamp             Return only samples with timestamp greater than lastSeenTimeStamp.
 * @param sampleValType                 Pointer to caller-supplied buffer to hold the type of returned sample values
 * @param vgpuInstanceSamplesCount      Pointer to caller-supplied array size, and returns number of vGPU instances
 * @param utilizationSamples            Pointer to caller-supplied buffer in which vGPU utilization samples are returned

 * @return
 *         - \ref NVML_SUCCESS                 if utilization samples are successfully retrieved
 *         - \ref NVML_ERROR_UNINITIALIZED     if the library has not been successfully initialized
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a device is invalid, \a vgpuInstanceSamplesCount or \a sampleValType is
 *                                             NULL, or a sample count of 0 is passed with a non-NULL \a utilizationSamples
 *         - \ref NVML_ERROR_INSUFFICIENT_SIZE if supplied \a vgpuInstanceSamplesCount is too small to return samples for all
 *                                             vGPU instances currently executing on the device
 *         - \ref NVML_ERROR_NOT_SUPPORTED     if vGPU is not supported by the device
 *         - \ref NVML_ERROR_GPU_IS_LOST       if the target GPU has fallen off the bus or is otherwise inaccessible
 *         - \ref NVML_ERROR_NOT_FOUND         if sample entries are not found
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetVgpuUtilization(nvmlDevice_t device, unsigned long long lastSeenTimeStamp,
                                                  nvmlValueType_t *sampleValType, unsigned int *vgpuInstanceSamplesCount,
                                                  nvmlVgpuInstanceUtilizationSample_t *utilizationSamples);

/**
 * Retrieve the GRID licensable features.
 *
 * Identifies whether the system supports GRID Software Licensing. If it does, return the list of licensable feature(s)
 * and their current license status.
 *
 * @param device                    Identifier of the target device
 * @param pGridLicensableFeatures   Pointer to structure in which GRID licensable features are returned
 *
 * @return
 *         - \ref NVML_SUCCESS                 if licensable features are successfully retrieved
 *         - \ref NVML_ERROR_INVALID_ARGUMENT  if \a pGridLicensableFeatures is NULL
 *         - \ref NVML_ERROR_UNKNOWN           on any unexpected error
 */
nvmlReturn_t DECLDIR nvmlDeviceGetGridLicensableFeatures(nvmlDevice_t device, nvmlGridLicensableFeatures_t *pGridLicensableFeatures);

/** @} */

/**
 * NVML API versioning support
 */
#if defined(__NVML_API_VERSION_INTERNAL)
#undef nvmlDeviceGetPciInfo
#undef nvmlDeviceGetCount
#undef nvmlDeviceGetHandleByIndex
#undef nvmlDeviceGetHandleByPciBusId
#undef nvmlInit
#endif

#ifdef __cplusplus
}
#endif

#endif