# # Copyright (C) 2008 NVIDIA Corporation # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER # LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING # FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER # DEALINGS IN THE SOFTWARE. # # # utils.mk: common Makefile fragment used by nvidia-xconfig, # nvidia-installer, and nvidia-settings # ############################################################################## # The calling Makefile (when building as part of the NVIDIA graphics # driver) may export any of the following variables; we assign default # values if they are not exported by the caller ############################################################################## CC ?= gcc LD ?= ld # only set these warnings and optimizations if CFLAGS is unset CFLAGS ?= -Wall -O2 # always set these -f CFLAGS CFLAGS += -fno-strict-aliasing -fno-omit-frame-pointer -Wformat=2 CC_ONLY_CFLAGS ?= LDFLAGS ?= BIN_LDFLAGS ?= HOST_CC ?= $(CC) HOST_LD ?= $(LD) HOST_CFLAGS ?= $(CFLAGS) HOST_LDFLAGS ?= $(LDFLAGS) HOST_BIN_LDFLAGS ?= # always disable warnings that will break the build CFLAGS += -Wno-unused-parameter -Wno-format-zero-length HOST_CFLAGS += -Wno-unused-parameter -Wno-format-zero-length ifeq ($(DEBUG),1) STRIP_CMD ?= true CFLAGS += -O0 -g else STRIP_CMD ?= strip endif INSTALL ?= install INSTALL_BIN_ARGS ?= -m 755 INSTALL_LIB_ARGS ?= -m 644 INSTALL_DOC_ARGS ?= -m 644 M4 ?= m4 SED ?= sed M4 ?= m4 ECHO ?= echo PRINTF ?= printf MKDIR ?= mkdir -p RM ?= rm -f TOUCH ?= touch WHOAMI ?= whoami HOSTNAME_CMD ?= hostname DATE ?= date GZIP_CMD ?= gzip CHMOD ?= chmod NV_AUTO_DEPEND ?= 1 NV_VERBOSE ?= 0 ifndef TARGET_OS TARGET_OS := $(shell uname) endif ifeq ($(TARGET_OS),Linux) CFLAGS += -DNV_LINUX endif ifeq ($(TARGET_OS),FreeBSD) CFLAGS += -DNV_BSD endif ifeq ($(TARGET_OS),SunOS) CFLAGS += -DNV_SUNOS endif ifndef TARGET_ARCH TARGET_ARCH := $(shell uname -m) TARGET_ARCH := $(subst i386,x86,$(TARGET_ARCH)) TARGET_ARCH := $(subst i486,x86,$(TARGET_ARCH)) TARGET_ARCH := $(subst i586,x86,$(TARGET_ARCH)) TARGET_ARCH := $(subst i686,x86,$(TARGET_ARCH)) endif ifeq ($(TARGET_ARCH),x86) CFLAGS += -DNV_X86 -DNV_ARCH_BITS=32 endif ifeq ($(TARGET_ARCH),x86_64) CFLAGS += -DNV_X86_64 -DNV_ARCH_BITS=64 endif ifeq ($(TARGET_ARCH),armv7l) CFLAGS += -DNV_ARMV7 -DNV_ARCH_BITS=32 endif ifeq ($(TARGET_ARCH),aarch64) CFLAGS += -DNV_AARCH64 -DNV_ARCH_BITS=64 endif ifeq ($(TARGET_ARCH),ppc64le) CFLAGS += -DNV_PPC64LE -DNV_ARCH_BITS=64 endif ifeq ($(TARGET_OS),Linux) LIBDL_LIBS = -ldl else LIBDL_LIBS = endif # This variable controls which floating-point ABI is targeted. For ARM, it # defaults to "gnueabi" for softfp. Another option is "gnueabihf" for # hard(fp). This is necessary to pick up the correct rtld_test binary. # All other architectures default to empty. ifeq ($(TARGET_ARCH),armv7l) TARGET_ARCH_ABI ?= gnueabi endif TARGET_ARCH_ABI ?= ifeq ($(TARGET_ARCH_ABI),gnueabi) CFLAGS += -DNV_GNUEABI endif ifeq ($(TARGET_ARCH_ABI),gnueabihf) CFLAGS += -DNV_GNUEABIHF endif OUTPUTDIR ?= _out/$(TARGET_OS)_$(TARGET_ARCH) OUTPUTDIR_ABSOLUTE ?= $(CURDIR)/$(OUTPUTDIR) NV_QUIET_COMMAND_REMOVED_TARGET_PREFIX ?= CFLAGS += $(CC_ONLY_CFLAGS) ############################################################################## # This makefile uses the $(eval) builtin function, which was added in # GNU make 3.80. Check that the current make version recognizes it. # Idea suggested by: http://www.jgc.org/blog/cookbook-sample.pdf ############################################################################## _eval_available := $(eval _eval_available := T) ifneq ($(_eval_available),T) $(error This Makefile requires a GNU Make that supports 'eval'. Please upgrade to GNU make 3.80 or later) endif ############################################################################## # define variables used when installing the open source utilities from # the source tarball ############################################################################## PREFIX ?= /usr/local BINDIR = $(DESTDIR)$(PREFIX)/bin LIBDIR = $(DESTDIR)$(PREFIX)/lib MANDIR = $(DESTDIR)$(PREFIX)/share/man/man1 ############################################################################## # default build rule, so that nothing here in utils.mk accidentally # gets selected as the default rule ############################################################################## default build: all ############################################################################## # get the definition of NVIDIA_VERSION from version.mk # # version.mk may be in one of two places: either in $(OUTPUTDIR) when # building as part of the NVIDIA driver build, or directly in the # source directory when building from the source tarball # # Throw an error if one of these two places did not define NVIDIA_VERSION. ############################################################################## VERSION_MK := $(wildcard $(OUTPUTDIR)/version.mk version.mk) include $(VERSION_MK) ifndef NVIDIA_VERSION $(error NVIDIA_VERSION undefined) endif ############################################################################## # Several of the functions below take an argument that indicates if # the expression is for the target platform (the system the built # program is going to run on) or the host platform (the system # performing the build). The argument is either "HOST" or "TARGET" # and needs to be converted: # # "HOST" -> "HOST_" # "TARGET" -> "" # # and prepended to "CC" or "CFLAGS" ############################################################################## host_target = $(patsubst HOST,HOST_,$(patsubst TARGET,,$(1))) host_target_cc = $(call host_target,$(1))CC host_target_cflags = $(call host_target,$(1))CFLAGS ############################################################################## # to generate the dependency files, use the compiler's "-MM" option to # generate output of the form "foo.o : foo.c foo.h"; then, use sed to # wrap the prerequisites with $(wildcard ...); the wildcard function # serves as an existence filter, so that files that are later removed # from the build do not cause stale references. Also, "-MM" will # cause the compiler to name the target as if it were in the current # directory ("foo.o: "); use sed to rename the target in the output # directory ("_out/Linux_x86/foo.o: ") so that the target actually # applies to the object files produced in the build. # # Arguments: # $(1): whether for host or target platform ("HOST" or "TARGET") # $(2): source filename # $(3): object filename ############################################################################## ifeq ($(NV_AUTO_DEPEND),1) AUTO_DEP_CMD = && $($(call host_target_cc,$(1))) \ -MM $$($(call host_target_cflags,$(1))) $$< | $$(SED) \ -e "s,: ,: $$$$\(wildcard ," \ -e "s,\([^\\]\)$$$$,\1)," \ -e "s;^$$(addsuffix .o,$$(notdir $$(basename $(2)))): ;$(3): ;" \ > $$(@:.o=.d) else AUTO_DEP_CMD = endif ############################################################################## # echo minimal compile information in the non-NV_VERBOSE case # # NV_MODULE_LOGGING_NAME can be set to prepend quiet build output with a # label of which build component is being built ############################################################################## NV_MODULE_LOGGING_NAME ?= ifeq ($(NV_VERBOSE),0) quiet_cmd = @$(PRINTF) \ " $(if $(NV_MODULE_LOGGING_NAME),[ %-17.17s ],%s) $(quiet_$(1))\n" \ "$(NV_MODULE_LOGGING_NAME)" && $($(1)) else quiet_cmd = $($(1)) endif # define LINK and HOST_LINK to be the same as CC; this is so that, # even though we use CC to link programs, we can have a different # quiet rule that uses '$@' as it's arg, rather than '$<' LINK = $(CC) HOST_LINK = $(HOST_CC) # strip NV_QUIET_COMMAND_REMOVED_TARGET_PREFIX from the target string define_quiet_cmd = $(1) $(patsubst $(NV_QUIET_COMMAND_REMOVED_TARGET_PREFIX)/%,%,$(2)) # define the quiet commands: quiet_CC = $(call define_quiet_cmd,CC ,$<) quiet_HOST_CC = $(call define_quiet_cmd,HOST_CC ,$<) quiet_LINK = $(call define_quiet_cmd,LINK ,$@) quiet_HOST_LINK = $(call define_quiet_cmd,HOST_LINK ,$@) quiet_M4 = $(call define_quiet_cmd,M4 ,$<) quiet_STRIP_CMD = $(call define_quiet_cmd,STRIP ,$@) ############################################################################## # Tell gmake to delete the target of a rule if it has changed and its # commands exit with a nonzero exit status. ############################################################################## .DELETE_ON_ERROR: ############################################################################## # function to generate a list of object files from their corresponding # source files using the specified path. The _WITH_DIR variant takes an # output path as the second argument while the BUILD_OBJECT_LIST defaults # to using the value of OUTPUTDIR as the output path. example usage: # # OBJS = $(call BUILD_OBJECT_LIST_WITH_DIR,$(SRC),$(DIR)) ############################################################################## BUILD_OBJECT_LIST_WITH_DIR = \ $(addprefix $(2)/,$(notdir $(addsuffix .o,$(basename $(1))))) BUILD_OBJECT_LIST = \ $(call BUILD_OBJECT_LIST_WITH_DIR,$(1),$(OUTPUTDIR)) ############################################################################## # function to generate a list of dependency files from their # corresponding source files using the specified path. The _WITH_DIR # variant takes an output path as the second argument while the # BUILD_DEPENDENCY_LIST default to using the value of OUTPUTDIR as the # output path. example usage: # # DEPS = $(call BUILD_DEPENDENCY_LIST_WITH_DIR,$(SRC),$(DIR)) ############################################################################## BUILD_DEPENDENCY_LIST_WITH_DIR = \ $(addprefix $(2)/,$(notdir $(addsuffix .d,$(basename $(1))))) BUILD_DEPENDENCY_LIST = \ $(call BUILD_DEPENDENCY_LIST_WITH_DIR,$(1),$(OUTPUTDIR)) ############################################################################## # functions to define a rule to build an object file; the first # argument for all functions is whether the rule is for the target or # host platform ("HOST" or "TARGET"), the second argument for all # functions is the source file to compile. # # The _WITH_OBJECT_NAME and _WITH_DIR function name suffixes describe # the third and possibly fourth arguments based on order. The # _WITH_OBJECT_NAME argument is the object filename to produce while # the _WITH_DIR argument is the destination path for the object file. # # Example usage: # # $(eval $(call DEFINE_OBJECT_RULE,TARGET,foo.c)) # # Note this also attempts to include the dependency file for this # source file. # # The DEFINE_OBJECT_RULE is functionally equivalent to # DEFINE_OBJECT_RULE_WITH_OBJECT_NAME, but infers the object file name # from the source file name (this is normally what you want). ############################################################################## define DEFINE_OBJECT_RULE_WITH_OBJECT_NAME_WITH_DIR $(3): $(2) @$(MKDIR) $(4) $$(call quiet_cmd,$(call host_target_cc,$(1))) \ $$($(call host_target_cflags,$(1))) -c $$< -o $$@ \ $(call AUTO_DEP_CMD,$(1),$(2),$(3)) -include $$(call BUILD_DEPENDENCY_LIST_WITH_DIR,$(3),$(4)) # declare empty rule for generating dependency file; we generate the # dependency files implicitly when compiling the source file (see # AUTO_DEP_CMD above), so we don't want gmake to spend time searching # for an explicit rule to generate the dependency file $$(call BUILD_DEPENDENCY_LIST_WITH_DIR,$(3),$(4)): ; endef define DEFINE_OBJECT_RULE_WITH_OBJECT_NAME $$(eval $$(call DEFINE_OBJECT_RULE_WITH_OBJECT_NAME_WITH_DIR,$(1),$(2),\ $(3),$(OUTPUTDIR))) endef define DEFINE_OBJECT_RULE_WITH_DIR $$(eval $$(call DEFINE_OBJECT_RULE_WITH_OBJECT_NAME_WITH_DIR,$(1),$(2),\ $$(call BUILD_OBJECT_LIST_WITH_DIR,$(2),$(3)),$(3))) endef define DEFINE_OBJECT_RULE $$(eval $$(call DEFINE_OBJECT_RULE_WITH_DIR,$(1),$(2),$(OUTPUTDIR))) endef ############################################################################## # STAMP_C - this is a source file that is generated during the build # to capture information about the build environment for the utility. # # The DEFINE_STAMP_C_RULE function is used to define the rule for # generating STAMP_C. First argument is a list of dependencies for # STAMP_C (g_stamp.o is filtered out of the list); second argument is # the name of the program being built. # # The includer of utils.mk should add $(STAMP_C) to its list of source # files ############################################################################## STAMP_C = $(OUTPUTDIR)/g_stamp.c define DEFINE_STAMP_C_RULE $$(STAMP_C): $$(filter-out \ $$(call BUILD_OBJECT_LIST,$$(STAMP_C)),$(1)) \ $$(VERSION_MK) @ $$(RM) $$@ @ $$(PRINTF) "%s" "const char NV_ID[] = \"nvidia id: " >> $$@ @ $$(PRINTF) "%s" "$(2): " >> $$@ @ $$(PRINTF) "%s" "version $$(NVIDIA_VERSION) " >> $$@ @ $$(PRINTF) "%s" "($$(shell $$(WHOAMI))" >> $$@ @ $$(PRINTF) "%s" "@$$(shell $$(HOSTNAME_CMD))) " >> $$@ @ $$(PRINTF) "%s\n" "$$(shell $(DATE))\";" >> $$@ @ $$(PRINTF) "%s\n" "const char *pNV_ID = NV_ID + 11;" >> $$@ endef