diff options
Diffstat (limited to 'src/i830_common.h')
| -rw-r--r-- | src/i830_common.h | 288 |
1 files changed, 288 insertions, 0 deletions
diff --git a/src/i830_common.h b/src/i830_common.h new file mode 100644 index 00000000..3367bfc1 --- /dev/null +++ b/src/i830_common.h @@ -0,0 +1,288 @@ +/************************************************************************** + +Copyright 2001 VA Linux Systems Inc., Fremont, California. +Copyright 2002 Tungsten Graphics Inc., Cedar Park, Texas. + +All Rights Reserved. + +Permission is hereby granted, free of charge, to any person obtaining a +copy of this software and associated documentation files (the "Software"), +to deal in the Software without restriction, including without limitation +on the rights to use, copy, modify, merge, publish, distribute, sub +license, and/or sell copies of the Software, and to permit persons to whom +the Software is furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice (including the next +paragraph) shall be included in all copies or substantial portions of the +Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL +ATI, VA LINUX SYSTEMS AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, +DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR +OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE +USE OR OTHER DEALINGS IN THE SOFTWARE. + +**************************************************************************/ + +/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/i810/i830_common.h,v 1.2 2002/12/10 01:27:05 dawes Exp $ */ + +/* Author: Jeff Hartmann <jhartmann@valinux.com> + + Converted to common header format: + Jens Owen <jens@tungstengraphics.com> + */ + +#ifndef _I830_COMMON_H_ +#define _I830_COMMON_H_ + +/* WARNING: These defines must be the same as what the Xserver uses. + * if you change them, you must change the defines in the Xserver. + */ + +#ifndef _I830_DEFINES_ +#define _I830_DEFINES_ + +#define I830_DMA_BUF_ORDER 12 +#define I830_DMA_BUF_SZ (1<<I830_DMA_BUF_ORDER) +#define I830_DMA_BUF_NR 256 +#define I830_NR_SAREA_CLIPRECTS 8 + +/* Each region is a minimum of 64k, and there are at most 64 of them. + */ +#define I830_NR_TEX_REGIONS 64 +#define I830_LOG_MIN_TEX_REGION_SIZE 16 + +/* if defining I830_ENABLE_4_TEXTURES, do it in i830_3d_reg.h, too */ +#if !defined(I830_ENABLE_4_TEXTURES) +#define I830_TEXTURE_COUNT 2 +#define I830_TEXBLEND_COUNT 2 /* always same as TEXTURE_COUNT? */ +#else /* defined(I830_ENABLE_4_TEXTURES) */ +#define I830_TEXTURE_COUNT 4 +#define I830_TEXBLEND_COUNT 4 /* always same as TEXTURE_COUNT? */ +#endif /* I830_ENABLE_4_TEXTURES */ + +#define I830_TEXBLEND_SIZE 12 /* (4 args + op) * 2 + COLOR_FACTOR */ + +#define I830_UPLOAD_CTX 0x1 +#define I830_UPLOAD_BUFFERS 0x2 +#define I830_UPLOAD_CLIPRECTS 0x4 +#define I830_UPLOAD_TEX0_IMAGE 0x100 /* handled clientside */ +#define I830_UPLOAD_TEX0_CUBE 0x200 /* handled clientside */ +#define I830_UPLOAD_TEX1_IMAGE 0x400 /* handled clientside */ +#define I830_UPLOAD_TEX1_CUBE 0x800 /* handled clientside */ +#define I830_UPLOAD_TEX2_IMAGE 0x1000 /* handled clientside */ +#define I830_UPLOAD_TEX2_CUBE 0x2000 /* handled clientside */ +#define I830_UPLOAD_TEX3_IMAGE 0x4000 /* handled clientside */ +#define I830_UPLOAD_TEX3_CUBE 0x8000 /* handled clientside */ +#define I830_UPLOAD_TEX_N_IMAGE(n) (0x100 << (n * 2)) +#define I830_UPLOAD_TEX_N_CUBE(n) (0x200 << (n * 2)) +#define I830_UPLOAD_TEXIMAGE_MASK 0xff00 +#define I830_UPLOAD_TEX0 0x10000 +#define I830_UPLOAD_TEX1 0x20000 +#define I830_UPLOAD_TEX2 0x40000 +#define I830_UPLOAD_TEX3 0x80000 +#define I830_UPLOAD_TEX_N(n) (0x10000 << (n)) +#define I830_UPLOAD_TEX_MASK 0xf0000 +#define I830_UPLOAD_TEXBLEND0 0x100000 +#define I830_UPLOAD_TEXBLEND1 0x200000 +#define I830_UPLOAD_TEXBLEND2 0x400000 +#define I830_UPLOAD_TEXBLEND3 0x800000 +#define I830_UPLOAD_TEXBLEND_N(n) (0x100000 << (n)) +#define I830_UPLOAD_TEXBLEND_MASK 0xf00000 +#define I830_UPLOAD_TEX_PALETTE_N(n) (0x1000000 << (n)) +#define I830_UPLOAD_TEX_PALETTE_SHARED 0x4000000 +#define I830_UPLOAD_STIPPLE 0x8000000 + +/* Indices into buf.Setup where various bits of state are mirrored per + * context and per buffer. These can be fired at the card as a unit, + * or in a piecewise fashion as required. + */ + +/* Destbuffer state + * - backbuffer linear offset and pitch -- invarient in the current dri + * - zbuffer linear offset and pitch -- also invarient + * - drawing origin in back and depth buffers. + * + * Keep the depth/back buffer state here to acommodate private buffers + * in the future. + */ + +#define I830_DESTREG_CBUFADDR 0 +/* Invarient */ +#define I830_DESTREG_DBUFADDR 1 +#define I830_DESTREG_DV0 2 +#define I830_DESTREG_DV1 3 +#define I830_DESTREG_SENABLE 4 +#define I830_DESTREG_SR0 5 +#define I830_DESTREG_SR1 6 +#define I830_DESTREG_SR2 7 +#define I830_DESTREG_DR0 8 +#define I830_DESTREG_DR1 9 +#define I830_DESTREG_DR2 10 +#define I830_DESTREG_DR3 11 +#define I830_DESTREG_DR4 12 +#define I830_DEST_SETUP_SIZE 13 + +/* Context state + */ +#define I830_CTXREG_STATE1 0 +#define I830_CTXREG_STATE2 1 +#define I830_CTXREG_STATE3 2 +#define I830_CTXREG_STATE4 3 +#define I830_CTXREG_STATE5 4 +#define I830_CTXREG_IALPHAB 5 +#define I830_CTXREG_STENCILTST 6 +#define I830_CTXREG_ENABLES_1 7 +#define I830_CTXREG_ENABLES_2 8 +#define I830_CTXREG_AA 9 +#define I830_CTXREG_FOGCOLOR 10 +#define I830_CTXREG_BLENDCOLR0 11 +#define I830_CTXREG_BLENDCOLR 12 /* Dword 1 of 2 dword command */ +#define I830_CTXREG_VF 13 +#define I830_CTXREG_VF2 14 +#define I830_CTXREG_MCSB0 15 +#define I830_CTXREG_MCSB1 16 +#define I830_CTX_SETUP_SIZE 17 + +/* 1.3: Stipple state + */ +#define I830_STPREG_ST0 0 +#define I830_STPREG_ST1 1 +#define I830_STP_SETUP_SIZE 2 + +/* Texture state (per tex unit) + */ +#define I830_TEXREG_MI0 0 /* GFX_OP_MAP_INFO (6 dwords) */ +#define I830_TEXREG_MI1 1 +#define I830_TEXREG_MI2 2 +#define I830_TEXREG_MI3 3 +#define I830_TEXREG_MI4 4 +#define I830_TEXREG_MI5 5 +#define I830_TEXREG_MF 6 /* GFX_OP_MAP_FILTER */ +#define I830_TEXREG_MLC 7 /* GFX_OP_MAP_LOD_CTL */ +#define I830_TEXREG_MLL 8 /* GFX_OP_MAP_LOD_LIMITS */ +#define I830_TEXREG_MCS 9 /* GFX_OP_MAP_COORD_SETS */ +#define I830_TEX_SETUP_SIZE 10 + +/* New version. Kernel auto-detects. + */ +#define I830_TEXREG_TM0LI 0 /* load immediate 2 texture map n */ +#define I830_TEXREG_TM0S0 1 +#define I830_TEXREG_TM0S1 2 +#define I830_TEXREG_TM0S2 3 +#define I830_TEXREG_TM0S3 4 +#define I830_TEXREG_TM0S4 5 +#define I830_TEXREG_NOP0 6 /* noop */ +#define I830_TEXREG_NOP1 7 /* noop */ +#define I830_TEXREG_NOP2 8 /* noop */ +#define __I830_TEXREG_MCS 9 /* GFX_OP_MAP_COORD_SETS -- shared */ +#define __I830_TEX_SETUP_SIZE 10 + + +#define I830_FRONT 0x1 +#define I830_BACK 0x2 +#define I830_DEPTH 0x4 + +/* Driver specific DRM command indices + * NOTE: these are not OS specific, but they are driver specific + */ +#define DRM_I830_INIT 0x00 +#define DRM_I830_VERTEX 0x01 +#define DRM_I830_CLEAR 0x02 +#define DRM_I830_FLUSH 0x03 +#define DRM_I830_GETAGE 0x04 +#define DRM_I830_GETBUF 0x05 +#define DRM_I830_SWAP 0x06 +#define DRM_I830_COPY 0x07 +#define DRM_I830_DOCOPY 0x08 +#define DRM_I830_FLIP 0x09 +#define DRM_I830_IRQ_EMIT 0x0a +#define DRM_I830_IRQ_WAIT 0x0b +#define DRM_I830_GETPARAM 0x0c +#define DRM_I830_SETPARAM 0x0d + +#endif /* _I830_DEFINES_ */ + +typedef struct { + enum { + I830_INIT_DMA = 0x01, + I830_CLEANUP_DMA = 0x02 + } func; + unsigned int mmio_offset; + unsigned int buffers_offset; + int sarea_priv_offset; + unsigned int ring_start; + unsigned int ring_end; + unsigned int ring_size; + unsigned int front_offset; + unsigned int back_offset; + unsigned int depth_offset; + unsigned int w; + unsigned int h; + unsigned int pitch; + unsigned int pitch_bits; + unsigned int back_pitch; + unsigned int depth_pitch; + unsigned int cpp; +} drmI830Init; + +typedef struct { + int clear_color; + int clear_depth; + int flags; + unsigned int clear_colormask; + unsigned int clear_depthmask; +} drmI830Clear; + +/* These may be placeholders if we have more cliprects than + * I830_NR_SAREA_CLIPRECTS. In that case, the client sets discard to + * false, indicating that the buffer will be dispatched again with a + * new set of cliprects. + */ +typedef struct { + int idx; /* buffer index */ + int used; /* nr bytes in use */ + int discard; /* client is finished with the buffer? */ +} drmI830Vertex; + +typedef struct { + int idx; /* buffer index */ + int used; /* nr bytes in use */ + void *address; /* Address to copy from */ +} drmI830Copy; + +typedef struct { + void *virtual; + int request_idx; + int request_size; + int granted; +} drmI830DMA; + +typedef struct drm_i830_irq_emit { + int *irq_seq; +} drmI830IrqEmit; + +typedef struct drm_i830_irq_wait { + int irq_seq; +} drmI830IrqWait; + +typedef struct drm_i830_getparam { + int param; + int *value; +} drmI830GetParam; + +#define I830_PARAM_IRQ_ACTIVE 1 + + +typedef struct drm_i830_setparam { + int param; + int value; +} drmI830SetParam; + +#define I830_SETPARAM_USE_MI_BATCHBUFFER_START 1 + + + +#endif /* _I830_DRM_H_ */ |